Commit Graph

551 Commits

Author SHA1 Message Date
Bjorn Helgaas
f503ee4cbe Merge branch 'pci/enumeration' into next
* pci/enumeration:
  PCI: Include PCI-to-PCIe bridges as "Downstream Ports"
  PCI: Improve __pci_read_base() robustness
  PCI: Short-circuit pci_device_is_present() for disconnected devices
  PCI/MSI: Skip disabling disconnected devices
  PCI: Don't attempt config access to disconnected devices
  PCI: Add device disconnected state
  PCI: Export PCI device config accessors
2017-04-28 10:33:55 -05:00
Brian Norris
f90b087546 PCI: Export pci_remap_iospace() and pci_unmap_iospace()
These are useful for PCIe host drivers, and those drivers can be modules.

[bhelgaas: don't remove __weak; it's removed elsewhere]
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-04-21 10:57:29 -05:00
Keith Busch
fe2bd75b22 PCI: Short-circuit pci_device_is_present() for disconnected devices
If the PCI device is disconnected, return false immediately from
pci_device_is_present().  pci_device_is_present() uses the bus accessors,
so the early return in the device accessors doesn't help here.

Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-03-29 22:55:16 -05:00
Bjorn Helgaas
d98e092907 Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports"
This reverts commit 68db9bc814.

Yinghai reported that the following manual hotplug sequence:

  # echo 0 > /sys/bus/pci/slots/8/power
  # echo 1 > /sys/bus/pci/slots/8/power

worked in v4.9, but fails in v4.10-rc1, and that reverting 68db9bc814
("PCI: pciehp: Add runtime PM support for PCIe hotplug ports") makes it
work again.

Fixes: 68db9bc814 ("PCI: pciehp: Add runtime PM support for PCIe hotplug ports")
Link: https://lkml.kernel.org/r/CAE9FiQVCMCa7iVyuwp9z6VrY0cE7V_xghuXip28Ft52=8QmTWw@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=193951
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-03 08:53:51 -06:00
Bjorn Helgaas
2583157141 Merge branch 'pci/virtualization' into next
* pci/virtualization:
  PCI: Add comments about ROM BAR updating
  PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
  PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
  PCI: Don't update VF BARs while VF memory space is enabled
  PCI: Separate VF BAR updates from standard BAR updates
  PCI: Update BARs using property bits appropriate for type
  PCI: Ignore BAR updates on virtual functions
  PCI: Do any VF BAR updates before enabling the BARs
  PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+
  PCI: Convert Mellanox broken INTx quirks to be for listed devices only
  PCI: Convert broken INTx masking quirks from HEADER to FINAL
  net/mlx4_core: Use device ID defines
  PCI: Add Mellanox device IDs
2016-12-12 11:25:05 -06:00
Bjorn Helgaas
286c2378aa PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
pci_std_update_resource() only deals with standard BARs, so we don't have
to worry about the complications of VF BARs in an SR-IOV capability.

Compute the BAR address inline and remove pci_resource_bar().  That makes
pci_iov_resource_bar() unused, so remove that as well.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29 18:05:09 -06:00
Bjorn Helgaas
63880b230a PCI: Ignore BAR updates on virtual functions
VF BARs are read-only zero, so updating VF BARs will not have any effect.
See the SR-IOV spec r1.1, sec 3.4.1.11.

We already ignore these updates because of 70675e0b6a ("PCI: Don't try to
restore VF BARs"); this merely restructures it slightly to make it easier
to split updates for standard and SR-IOV BARs.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-28 11:37:56 -06:00
Lukas Wunner
68db9bc814 PCI: pciehp: Add runtime PM support for PCIe hotplug ports
Linux 4.8 added support for runtime suspending PCIe ports to D3hot with
commit 006d44e49a ("PCI: Add runtime PM support for PCIe ports"), but
excluded hotplug ports.  Those are now afforded runtime PM by the present
commit.

Hotplug ports require a few extra considerations:

- The configuration space of the port remains accessible in D3hot, so all
  the functions to read or modify the Slot Status and Slot Control
  registers need not be modified.  Even turning on slot power doesn't seem
  to require the port to be in D0, at least the PCIe spec doesn't say so
  and I confirmed that by testing with a Thunderbolt controller.

- However D0 is required to access devices on the secondary bus.  This
  happens in pciehp_check_link_status() and pciehp_configure_device() (both
  called from board_added()) and in pciehp_unconfigure_device() (called
  from remove_board()), so acquire a runtime PM ref for their invocation.

- The hotplug port stays active as long as it has active children.  If all
  hotplugged devices below the port runtime suspend, the port is allowed to
  runtime suspend as well.  Plug and unplug detection continues to work in
  D3hot.

- Hotplug interrupts are delivered in-band, so while the hotplug port
  itself is allowed to go to D3hot, its parent ports must stay in D0 for
  interrupts to come through.  Add a corresponding restriction to
  pci_dev_check_d3cold().

- Runtime PM may only be allowed if the hotplug port is handled natively by
  the OS.  On ACPI systems, the port may alternatively be handled by the
  firmware and things break if the OS puts the port into D3 behind the
  firmware's back:  E.g. Thunderbolt hotplug ports on non-Macs are handled
  by Intel's firmware in System Management Mode and the firmware is known
  to access devices on the port's secondary bus without checking first if
  the port is in D0: https://bugzilla.kernel.org/show_bug.cgi?id=53811

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-11-17 19:00:29 -06:00
Lukas Wunner
718a0609ae PCI: Unfold conditions to block runtime PM on PCIe ports
The conditions to block D3 on parent ports are currently condensed into a
single expression in pci_dev_check_d3cold().  Upcoming commits will add
further conditions for hotplug ports, making this expression fairly large
and impenetrable.  Unfold the conditions to maintain readability when they
are amended.

No functional change intended.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
CC: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:47:05 -06:00
Lukas Wunner
97a90aee5d PCI: Consolidate conditions to allow runtime PM on PCIe ports
The conditions to allow runtime PM on PCIe ports are currently spread
across two different files:  The condition relating to hotplug ports is
located in portdrv_pci.c whereas all other conditions are located in pci.c.

Consolidate all conditions in a single place in pci.c, thus making it
easier to follow the logic and amend conditions down the road.

Note that the condition relating to hotplug ports is inserted *before* the
condition relating to the "pcie_port_pm=force" command line option, so
runtime PM is not afforded to hotplug ports even if this option is given.
That's exactly how the code behaved up until now.  If this is not desired,
the ordering of the conditions can simply be reversed.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:46:22 -06:00
Lukas Wunner
c6a6330706 PCI: Activate runtime PM on a PCIe port only if it can suspend
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even
if it will never actually suspend because the BIOS is too old or the
"pcie_port_pm=off" option was specified on the kernel command line.

A few CPU cycles can be saved by not activating runtime PM at all in these
cases, because rpm_idle() and rpm_suspend() will bail out right at the
beginning when calling rpm_check_suspend_allowed(), instead of carrying out
various locking and assignments, invoking rpm_callback(), getting back
-EBUSY and rolling everything back.

The conditions checked in pci_bridge_d3_possible() are all static, they
never change during uptime of the system, hence it's safe to call this to
determine if runtime PM should be activated.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:46:06 -06:00
Lukas Wunner
e8559b7100 PCI: Speed up algorithm in pci_bridge_d3_update()
After a device has been added, removed or had its D3cold attributes
changed, we recheck whether its parent bridge may runtime suspend to D3hot
with pci_bridge_d3_update().

The most naive algorithm would be to iterate over the bridge's children and
check if any of them are blocking D3.

The function already tries to be a bit smarter than that by first checking
the device that was changed.  If this device already blocks D3 on the
bridge, then walking over all the other children can be skipped.  A
drawback of this approach is that if the device is *not* blocking D3, it
will be checked a second time by pci_walk_bus().  But that's cheap and is
outweighed by the performance gain of potentially skipping pci_walk_bus()
altogether.

The algorithm can be optimized further by taking into account if D3 is
currently allowed for the bridge, as shown in the following truth table:

(a)  remove &&  bridge_d3:  D3 is currently allowed for the bridge and
                            removing one of its children won't change
                            that.  No action necessary.
(b)  remove && !bridge_d3:  D3 may now be allowed for the bridge if the
                            removed child was the only one blocking it.
                            Check all its siblings to verify that.
(c) !remove &&  bridge_d3:  D3 may now be disallowed but this can only
                            be caused by the added/changed child, not
                            any of its siblings.  Check only that single
                            device.
(d) !remove && !bridge_d3:  D3 may now be allowed for the bridge if the
                            changed child was the only one blocking it.
                            Check all its siblings to verify that.
                            By checking beforehand if the changed child
                            is blocking D3, we may be able to skip
                            checking its siblings.

Currently we do not special-case option (a) and in case of option (c) we
gratuitously call pci_walk_bus().  Speed up the algorithm by adding these
optimizations.  Reword the comments a bit in an attempt to improve clarity.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:45:35 -06:00
Lukas Wunner
1ed276a7b9 PCI: Autosense device removal in pci_bridge_d3_update()
The algorithm to update the flag indicating whether a bridge may go to D3
makes a few optimizations based on whether the update was caused by the
removal of a device on the one hand, versus the addition of a device or the
change of its D3cold flags on the other hand.

The information whether the update pertains to a removal is currently
passed in by the caller, but the function may as well determine that itself
by examining the device in question, thereby allowing for a considerable
simplification and reduction of the code.

Out of several options to determine removal, I've chosen the function
device_is_registered() because it's cheap:  It merely returns the
dev->kobj.state_in_sysfs flag.  That flag is set through device_add() when
the root bus is scanned and cleared through device_remove().  The call to
pci_bridge_d3_update() happens after each of these calls, respectively, so
the ordering is correct.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:44:56 -06:00
Lukas Wunner
738a7edbfc PCI: Don't acquire ref on parent in pci_bridge_d3_update()
This function is always called with an existing pci_dev struct, which
holds a reference on the pci_bus struct it resides on, which in turn
holds a reference on pci_bus->bridge, which is the pci_dev's parent.

Hence there's no need to acquire an additional ref on the parent.

More specifically, the pci_dev exists until pci_destroy_dev() drops the
final reference on it, so all calls to pci_bridge_d3_update() must be
finished before that.  It is arguably the caller's responsibility to ensure
that it doesn't call pci_bridge_d3_update() with a pci_dev that might
suddenly disappear, but in any case the existing callers are all safe:

- The call in pci_destroy_dev() happens before the call to put_device().
- The call in pci_bus_add_device() is synchronized with pci_destroy_dev()
  using pci_lock_rescan_remove().
- The calls to pci_d3cold_disable() from the xhci and nouveau drivers
  are safe because a ref on the pci_dev is held as long as it's bound to
  a driver.
- The calls to pci_d3cold_enable() / pci_d3cold_disable() when modifying
  the sysfs "d3cold_allowed" entry are also safe because kernfs_drain()
  waits for existing sysfs users to finish before removing the entry,
  and pci_destroy_dev() is called way after that.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:43:49 -06:00
Alan Stern
6496ebd7ed PCI: Check for PME in targeted sleep state
One some systems, the firmware does not allow certain PCI devices to be put
in deep D-states.  This can cause problems for wakeup signalling, if the
device does not support PME# in the deepest allowed suspend state.  For
example, Pierre reports that on his system, ACPI does not permit his xHCI
host controller to go into D3 during runtime suspend -- but D3 is the only
state in which the controller can generate PME# signals.  As a result, the
controller goes into runtime suspend but never wakes up, so it doesn't work
properly.  USB devices plugged into the controller are never detected.

If the device relies on PME# for wakeup signals but is not capable of
generating PME# in the target state, the PCI core should accurately report
that it cannot do wakeup from runtime suspend.  This patch modifies the
pci_dev_run_wake() routine to add this check.

Reported-by: Pierre de Villemereuil <flyos@mailoo.org>
Tested-by: Pierre de Villemereuil <flyos@mailoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org
CC: Lukas Wunner <lukas@wunner.de>
2016-11-11 16:31:13 -06:00
Linus Torvalds
e6e3d8f8f4 PCI changes for the v4.9 merge window:
Enumeration
     microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)
 
   Resource management
     Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
     Ignore requested alignment for VF BARs (Yongji Xie)
 
   PCI device hotplug
     Make core explicitly non-modular (Paul Gortmaker)
 
   PCIe native device hotplug
     Rename pcie_isr() locals for clarity (Bjorn Helgaas)
     Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
     Remove unnecessary guard (Bjorn Helgaas)
     Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
     Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
     Clear attention LED on device add (Keith Busch)
     Allow exclusive userspace control of indicators (Keith Busch)
     Process all hotplug events before looking for new ones (Mayurkumar Patel)
     Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
     Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
     Make explicitly non-modular (Paul Gortmaker)
 
   Power management
     Afford direct-complete to devices with non-standard PM (Lukas Wunner)
     Query platform firmware for device power state (Lukas Wunner)
     Recognize D3cold in pci_update_current_state() (Lukas Wunner)
     Avoid unnecessary resume after direct-complete (Lukas Wunner)
     Make explicitly non-modular (Paul Gortmaker)
 
   Virtualization
     Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
     Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)
 
   MSI
     Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)
 
   AER
     Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
     Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
     Fix aer_probe() kernel-doc comment (Cao jin)
     Add bus flag to skip source ID matching (Jon Derrick)
     Avoid memory allocation in interrupt handling path (Jon Derrick)
     Cache capability position (Keith Busch)
     Make explicitly non-modular (Paul Gortmaker)
     Remove duplicate AER severity translation (Tyler Baicar)
     Send correct severity to calculate AER severity (Tyler Baicar)
 
   Precision Time Measurement
     Add Precision Time Measurement (PTM) support (Jonathan Yong)
     Add PTM clock granularity information (Bjorn Helgaas)
     Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)
 
   Generic host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Make explicitly non-modular (Paul Gortmaker)
 
   Altera host bridge driver
     Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
     Poll for link training status after retraining the link (Ley Foon Tan)
     Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
     Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
     Make MSI explicitly non-modular (Paul Gortmaker)
     Make explicitly non-modular (Paul Gortmaker)
     Relax device number checking to allow SR-IOV (Po Liu)
 
   ARM Versatile host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
 
   Axis ARTPEC-6 host bridge driver
     Drop __init from artpec6_add_pcie_port() (Niklas Cassel)
 
   Freescale i.MX6 host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   Intel VMD host bridge driver
     Add quirk for AER to ignore source ID (Jon Derrick)
     Allocate IRQ lists with correct MSI-X count (Jon Derrick)
     Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
     Eliminate vmd_vector member from list type (Jon Derrick)
     Eliminate index member from IRQ list (Jon Derrick)
     Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
     Request userspace control of PCIe hotplug indicators (Keith Busch)
     Move VMD driver to drivers/pci/host (Keith Busch)
 
   Marvell Aardvark host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)
 
   Microsoft Hyper-V host bridge driver
     Use zero-length array in struct pci_packet (Dexuan Cui)
     Use pci_function_description[0] in struct definitions (Dexuan Cui)
     Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
     Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
     Handle hv_pci_generic_compl() error case (Dexuan Cui)
     Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)
 
   NVIDIA Tegra host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Remove redundant _data suffix (Thierry Reding)
     Use of_device_get_match_data() (Thierry Reding)
 
   Qualcomm host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   Renesas R-Car host bridge driver
     Consolidate register space lookup and ioremap (Bjorn Helgaas)
     Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
     Add multi-MSI support (Grigory Kletsko)
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Fix some checkpatch warnings (Sergei Shtylyov)
     Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)
 
   Rockchip host bridge driver
     Add DT bindings for Rockchip PCIe controller (Shawn Lin)
     Add Rockchip PCIe controller support (Shawn Lin)
     Improve the deassert sequence of four reset pins (Shawn Lin)
     Fix wrong transmitted FTS count (Shawn Lin)
     Increase the Max Credit update interval (Rajat Jain)
 
   Samsung Exynos host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   Synopsys DesignWare host bridge driver
     Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
     Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
     Check LTSSM training bit before deciding link is up (Jisheng Zhang)
     Move link wait definitions to .c file (Joao Pinto)
     Wait for iATU enable (Joao Pinto)
     Add iATU Unroll feature (Joao Pinto)
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Make explicitly non-modular (Paul Gortmaker)
     Relax device number checking to allow SR-IOV (Po Liu)
     Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
     Remove redundant platform_get_resource() return value check (Wei Yongjun)
 
   TI DRA7xx host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   TI Keystone host bridge driver
     Propagate request_irq() failure (Wei Yongjun)
 
   Xilinx AXI host bridge driver
     Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
     Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
     Clear correct MSI set bit (Bharat Kumar Gogada)
     Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
     Make explicitly non-modular (Paul Gortmaker)
     Relax device number checking to allow SR-IOV (Po Liu)
 
   Xilinx NWL host bridge driver
     Expand error logging (Bharat Kumar Gogada)
     Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
     Make explicitly non-modular (Paul Gortmaker)
 
   Miscellaneous
     Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
     portdrv: Make explicitly non-modular (Paul Gortmaker)
     Make DPC explicitly non-modular (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9pOwAAoJEFmIoMA60/r8NfMQAMEMYK3yv/RQtcQvtB26L2eJ
 Zn6eJXZPFDsaP+uRYrZEEphHccGFJgmtnOEYjo5XH+wUovmj8BxIy58APEGij/69
 iJyaXkI2jRVCOFna6WLJKS0jM6/Lw40RdwrANqHfvzR9N8pEjDD36BglshFNK/pK
 07dYNtI+/sq1j5K1UE6bK4uiAURiPc2SfK4/+M4Mg4SfZMQgLIvpT8VHdercYSXN
 eGA0SHGNm8qIK2JArwa293z6zB0Kw05juLayZHai6PwDqqNMvzgzS4pChGJl4klH
 fFe3bhlBVR2SGh9nuHMgIMWKGKGkjWBjwS1p0ENDgdpBVPXmDIc7Ka8Q0BqAFz+F
 YOmj4BtR8U3mOj942bxYZYqqqt02Brlu+/YkY6+OtNjKWi7w0s24dd5vEfBl2nVV
 T2klW4P9MuCnsutfrxkFL8voJRCIdV3fohwLHfHVfNTZN+bSZnlo9MiywbgQlexV
 5BKIA5z9E87bhvo7Mr8VCZjjEV0E3RrT4sgaJyQhGUGIpuZDiZFHSujBo53jRSdy
 jvIb22cQtmQJAkafID6djcMbXh+LIhXqUfH1ZVqpJFFMJN43zB7dwaMwrLsZgqTi
 ZV7VxZJVN7U6JCQvtNvwLBeKT82T7jxVZoSIogc/UR0gelb6jPN/yiTX5TUzMgPs
 HW7F3hv0AdmYKPcGZJAP
 =0Aq4
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Summary of PCI changes for the v4.9 merge window:

  Enumeration:
   - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)

  Resource management:
   - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
   - Ignore requested alignment for VF BARs (Yongji Xie)

  PCI device hotplug:
   - Make core explicitly non-modular (Paul Gortmaker)

  PCIe native device hotplug:
   - Rename pcie_isr() locals for clarity (Bjorn Helgaas)
   - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
   - Remove unnecessary guard (Bjorn Helgaas)
   - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
   - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
   - Clear attention LED on device add (Keith Busch)
   - Allow exclusive userspace control of indicators (Keith Busch)
   - Process all hotplug events before looking for new ones (Mayurkumar Patel)
   - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
   - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
   - Make explicitly non-modular (Paul Gortmaker)

  Power management:
   - Afford direct-complete to devices with non-standard PM (Lukas Wunner)
   - Query platform firmware for device power state (Lukas Wunner)
   - Recognize D3cold in pci_update_current_state() (Lukas Wunner)
   - Avoid unnecessary resume after direct-complete (Lukas Wunner)
   - Make explicitly non-modular (Paul Gortmaker)

  Virtualization:
   - Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
   - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)

  MSI:
   - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)

  AER:
   - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
   - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
   - Fix aer_probe() kernel-doc comment (Cao jin)
   - Add bus flag to skip source ID matching (Jon Derrick)
   - Avoid memory allocation in interrupt handling path (Jon Derrick)
   - Cache capability position (Keith Busch)
   - Make explicitly non-modular (Paul Gortmaker)
   - Remove duplicate AER severity translation (Tyler Baicar)
   - Send correct severity to calculate AER severity (Tyler Baicar)

  Precision Time Measurement:
   - Add Precision Time Measurement (PTM) support (Jonathan Yong)
   - Add PTM clock granularity information (Bjorn Helgaas)
   - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)

  Generic host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)

  Altera host bridge driver:
   - Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
   - Poll for link training status after retraining the link (Ley Foon Tan)
   - Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
   - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
   - Make MSI explicitly non-modular (Paul Gortmaker)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  ARM Versatile host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)

  Axis ARTPEC-6 host bridge driver:
   - Drop __init from artpec6_add_pcie_port() (Niklas Cassel)

  Freescale i.MX6 host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Intel VMD host bridge driver:
   - Add quirk for AER to ignore source ID (Jon Derrick)
   - Allocate IRQ lists with correct MSI-X count (Jon Derrick)
   - Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
   - Eliminate vmd_vector member from list type (Jon Derrick)
   - Eliminate index member from IRQ list (Jon Derrick)
   - Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
   - Request userspace control of PCIe hotplug indicators (Keith Busch)
   - Move VMD driver to drivers/pci/host (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)

  Microsoft Hyper-V host bridge driver:
   - Use zero-length array in struct pci_packet (Dexuan Cui)
   - Use pci_function_description[0] in struct definitions (Dexuan Cui)
   - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
   - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
   - Handle hv_pci_generic_compl() error case (Dexuan Cui)
   - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)

  NVIDIA Tegra host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant _data suffix (Thierry Reding)
   - Use of_device_get_match_data() (Thierry Reding)

  Qualcomm host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Renesas R-Car host bridge driver:
   - Consolidate register space lookup and ioremap (Bjorn Helgaas)
   - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
   - Add multi-MSI support (Grigory Kletsko)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Fix some checkpatch warnings (Sergei Shtylyov)
   - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)

  Rockchip host bridge driver:
   - Add DT bindings for Rockchip PCIe controller (Shawn Lin)
   - Add Rockchip PCIe controller support (Shawn Lin)
   - Improve the deassert sequence of four reset pins (Shawn Lin)
   - Fix wrong transmitted FTS count (Shawn Lin)
   - Increase the Max Credit update interval (Rajat Jain)

  Samsung Exynos host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Synopsys DesignWare host bridge driver:
   - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
   - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
   - Check LTSSM training bit before deciding link is up (Jisheng Zhang)
   - Move link wait definitions to .c file (Joao Pinto)
   - Wait for iATU enable (Joao Pinto)
   - Add iATU Unroll feature (Joao Pinto)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)
   - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
   - Remove redundant platform_get_resource() return value check (Wei Yongjun)

  TI DRA7xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  TI Keystone host bridge driver:
   - Propagate request_irq() failure (Wei Yongjun)

  Xilinx AXI host bridge driver:
   - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
   - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
   - Clear correct MSI set bit (Bharat Kumar Gogada)
   - Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  Xilinx NWL host bridge driver:
   - Expand error logging (Bharat Kumar Gogada)
   - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)

  Miscellaneous:
   - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
   - portdrv: Make explicitly non-modular (Paul Gortmaker)
   - Make DPC explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits)
  x86/PCI: VMD: Move VMD driver to drivers/pci/host
  PCI: rockchip: Fix wrong transmitted FTS count
  PCI: rockchip: Improve the deassert sequence of four reset pins
  PCI: rockchip: Increase the Max Credit update interval
  PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
  PCI/AER: Fix aer_probe() kernel-doc comment
  PCI: Ignore requested alignment for VF BARs
  PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
  PCI: Avoid unnecessary resume after direct-complete
  PCI: Recognize D3cold in pci_update_current_state()
  PCI: Query platform firmware for device power state
  PCI: Afford direct-complete to devices with non-standard PM
  PCI/AER: Cache capability position
  PCI/AER: Avoid memory allocation in interrupt handling path
  x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
  PCI: pciehp: Allow exclusive userspace control of indicators
  ACPI / APEI: Send correct severity to calculate AER severity
  PCI/AER: Remove duplicate AER severity translation
  x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
  x86/PCI: VMD: Eliminate index member from IRQ list
  ...
2016-10-07 11:46:37 -07:00
Bjorn Helgaas
e15194d2a7 Merge branch 'pci/resource' into next
* pci/resource:
  PCI: Ignore requested alignment for VF BARs
  PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
2016-10-03 09:43:21 -05:00
Yongji Xie
62d9a78f32 PCI: Ignore requested alignment for VF BARs
Resource allocation for VFs is done via the VF BARx registers in the PF's
SR-IOV Capability, and the BARs in the VFs themselves are read-only zeros
(see SR-IOV spec r1.1, secs 3.3.14 and 3.4.1.11).

Even though the actual VF BARs are read-only zeros, the VF dev->resource[]
structs describe the space allocated for the VF (this is a piece of the
space described by the VF BARx register in the PF's SR-IOV capability).

It's meaningless to request additional alignment for a VF: the VF BAR
alignment is completely determined by the alignment of the VF BARx in the
PF and the size of the VF BAR.

Ignore the user's alignment requests for VF devices.

Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-28 17:17:20 -05:00
Yongji Xie
f0b99f70e9 PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
Users may request additional alignment of PCI resources, e.g., to align
BARs on page boundaries so they can be shared with guests via VFIO.  This
of course may require reallocation if firmware has already assigned the
BARs with smaller alignments.

If the platform has requested PCI_PROBE_ONLY, we should never change any
PCI BARs, so we can't provide any additional alignment.  Also, if a BAR is
marked as IORESOURCE_PCI_FIXED, e.g., for PCI Enhanced Allocation or if the
firmware depends on the current BAR value, we can't change the alignment.

In these cases, log a message and ignore the user's alignment requests.

[bhelgaas: changelog, use goto to simplify PCI_PROBE_ONLY check]
Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-28 16:44:52 -05:00
Lukas Wunner
a6a64026c0 PCI: Recognize D3cold in pci_update_current_state()
Whenever a device is resumed or its power state is changed using the
platform, its new power state is read from the PM Control & Status Register
and cached in pci_dev->current_state by calling pci_update_current_state().

If the device is in D3cold, reading from config space typically results in
a fabricated "all ones" response.  But if it's in D3hot, the two bits
representing the power state in the PMCSR are *also* set to 1.  Thus D3hot
and D3cold are not discernible by just reading the PMCSR.

To account for this, pci_update_current_state() uses two workarounds:

- When transitioning to D3cold using pci_platform_power_transition(), the
  new power state is set blindly by pci_update_current_state(), i.e.
  without verifying that the device actually *is* in D3cold.  This is
  achieved by setting the "state" argument to PCI_D3cold.  The "state"
  argument was originally intended to convey the new state in case the
  device doesn't have the PM capability.  It is *also* used to convey the
  device state if the PM capability is present and the new state is D3cold,
  but this was never explained in the kerneldoc.

- Once the current_state is set to D3cold, further invocations of
  pci_update_current_state() will blindly assume that the device is still
  in D3cold and leave the current_state unmodified.  To get out of this
  impasse, the current_state has to be set directly, typically by calling
  pci_raw_set_power_state() or pci_enable_device().

It would be desirable if pci_update_current_state() could reliably detect
D3cold by itself.  That would allow us to do away with these workarounds,
and it would allow for a smarter, more energy conserving runtime resume
strategy after system sleep:  Currently devices which utilize
direct_complete are mandatorily runtime resumed in their ->complete stage.
This can be avoided if their power state after system sleep is the same as
before, but it requires a mechanism to detect the power state reliably.

We've just gained the ability to query the platform firmware for its
opinion on the device's power state.  On platforms conforming to ACPI 4.0
or newer, this allows recognition of D3cold.  Pre-4.0 platforms lack _PR3
and therefore the deepest power state that will ever be reported is D3hot,
even though the device may actually be in D3cold.  To detect D3cold in
those cases, accessibility of the vendor ID in config space is probed using
pci_device_is_present().  This also works for devices which are not
platform-power-manageable at all, but can be suspended to D3cold using a
nonstandard mechanism (e.g. some hybrid graphics laptops or Thunderbolt on
the Mac).

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28 11:47:38 -05:00
Lukas Wunner
cc7cc02bad PCI: Query platform firmware for device power state
Usually the most accurate way to determine a PCI device's power state is to
read its PM Control & Status Register.  There are two cases however when
this is not an option:  If the device doesn't have the PM capability at
all, or if it is in D3cold (in which case its config space is
inaccessible).

In both cases, we can alternatively query the platform firmware for its
opinion on the device's power state.  To facilitate this, augment struct
pci_platform_pm_ops with a ->get_power callback and implement it for
acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far).

It is used by a forthcoming commit to let pci_update_current_state()
recognize D3cold.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28 11:46:51 -05:00
Lukas Wunner
4132a577a0 PCI: Afford direct-complete to devices with non-standard PM
There are devices not power-manageable by the platform, but still able to
runtime suspend to D3cold with a non-standard mechanism.  One example is
laptop hybrid graphics where the discrete GPU and its built-in HDA
controller are power-managed either with a _DSM (AMD PowerXpress, Nvidia
Optimus) or a separate gmux controller (MacBook Pro).  Another example is
Thunderbolt on Macs which is power-managed with custom ACPI methods.

When putting the system to sleep, we currently handle such devices
improperly by transitioning them from D3cold to D3hot (the default power
state defined at the top of pci_target_state()).  This wastes energy and
prolongs the suspend sequence (powering up the Thunderbolt controller takes
2 seconds).

Avoid that by assuming that a non-standard PM mechanism is at work if the
device is not platform-power-manageable but currently in D3cold.

If the device is wakeup enabled, we might still have to wake it up from
D3cold if PME cannot be signaled from that power state.

The check for devices without PM capability comes before the check for
D3cold since such devices could in theory also be powered down by
non-standard means and should then be afforded direct-complete as well.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28 11:45:27 -05:00
Mika Westerberg
afd29f9017 PCI: Add pci_find_resource()
Add a new helper function pci_find_resource() that can be used to find out
whether a given resource (for example from a child device) is contained
within given PCI device's standard resources.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:16:03 +02:00
Linus Torvalds
c8d0267efd PCI changes for the v4.8 merge window:
Enumeration
     Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
     Add parent device field to ECAM struct pci_config_window (Jayachandran C)
     Add generic MCFG table handling (Tomasz Nowicki)
     Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
     Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
 
   Resource management
     Add devm_request_pci_bus_resources() (Bjorn Helgaas)
     Unify pci_resource_to_user() declarations (Bjorn Helgaas)
     Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
     Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
     Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
     Ignore write combining when mapping I/O port space (Bjorn Helgaas)
     Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
     Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
     Support I/O resources when parsing host bridge resources (Jayachandran C)
     Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
     Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
     Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
     Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
     Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
     Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
     Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
     Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
 
   PCI device hotplug
     Allow additional bus numbers for hotplug bridges (Keith Busch)
     Ignore interrupts during D3cold (Lukas Wunner)
 
   Power management
     Enforce type casting for pci_power_t (Andy Shevchenko)
     Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
     Put PCIe ports into D3 during suspend (Mika Westerberg)
     Power on bridges before scanning new devices (Mika Westerberg)
     Runtime resume bridge before rescan (Mika Westerberg)
     Add runtime PM support for PCIe ports (Mika Westerberg)
     Remove redundant check of pcie_set_clkpm (Shawn Lin)
 
   Virtualization
     Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
     Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
     Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
     Add ACS quirk for Solarflare SFC9220 (Edward Cree)
 
   MSI
     Fix PCI_MSI dependencies (Arnd Bergmann)
     Add pci_msix_desc_addr() helper (Christoph Hellwig)
     Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
     Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
     Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
     Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
 
   Error Handling
     Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
     Remove DPC tristate module option (Keith Busch)
     Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
 
   Generic host bridge driver
     Select IRQ_DOMAIN (Arnd Bergmann)
     Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
 
   ACPI host bridge driver
     Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
     Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
     Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
     Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
 
   Altera host bridge driver
     Check link status before retrain link (Ley Foon Tan)
     Poll for link up status after retraining the link (Ley Foon Tan)
 
   Axis ARTPEC-6 host bridge driver
     Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
     Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
     Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
 
   Intel VMD host bridge driver
     Use lock save/restore in interrupt enable path (Jon Derrick)
     Select device dma ops to override (Keith Busch)
     Initialize list item in IRQ disable (Keith Busch)
     Use x86_vector_domain as parent domain (Keith Busch)
     Separate MSI and MSI-X vector sharing (Keith Busch)
 
   Marvell Aardvark host bridge driver
     Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
     Add Aardvark PCI host controller driver (Thomas Petazzoni)
     Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
 
   Microsoft Hyper-V host bridge driver
     Fix interrupt cleanup path (Cathy Avery)
     Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
     Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
 
   NVIDIA Tegra host bridge driver
     Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
     Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
     Use lower-case hex consistently for register definitions (Thierry Reding)
     Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
     Stop setting pcibios_min_mem (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Drop gen2 dummy I/O port region (Bjorn Helgaas)
 
   TI DRA7xx host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Xilinx AXI host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Miscellaneous
     Make bus_attr_resource_alignment static (Ben Dooks)
     Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
     MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
     Make host bridge drivers explicitly non-modular (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py
 n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA
 qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI
 crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx
 wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe
 UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV
 WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj
 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x
 otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy
 HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ
 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm
 aBykjRsxbKQXlhVeIxuc
 =NVxu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...
2016-08-02 17:12:29 -04:00
Bjorn Helgaas
3efc702378 Merge branch 'pci/resource' into next
* pci/resource:
  unicore32/PCI: Remove pci=firmware command line parameter handling
  ARM/PCI: Remove arch-specific pcibios_enable_device()
  ARM64/PCI: Remove arch-specific pcibios_enable_device()
  MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
  ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
  PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups
  PCI: Add generic pci_bus_claim_resources()
  alx: Use pci_(request|release)_mem_regions
  ethernet/intel: Use pci_(request|release)_mem_regions
  GenWQE: Use pci_(request|release)_mem_regions
  lpfc: Use pci_(request|release)_mem_regions
  NVMe: Use pci_(request|release)_mem_regions
  PCI: Add helpers to request/release memory and I/O regions
  PCI: Extending pci=resource_alignment to specify device/vendor IDs
  sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  PCI: Unify pci_resource_to_user() declarations
  microblaze/PCI: Remove useless __pci_mmap_set_pgprot()
  powerpc/pci: Remove __pci_mmap_set_pgprot()
  PCI: Ignore write combining when mapping I/O port space
2016-08-01 12:23:44 -05:00
Bjorn Helgaas
a00c74c166 Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm:
  PCI/ASPM: Remove redundant check of pcie_set_clkpm

* pci/dpc:
  PCI: Remove DPC tristate module option
  PCI: Bind DPC to Root Ports as well as Downstream Ports
  PCI: Fix whitespace in struct dpc_dev
  PCI: Convert Downstream Port Containment driver to use devm_* functions

* pci/hotplug:
  PCI: Allow additional bus numbers for hotplug bridges

* pci/misc:
  PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
  PCI: Make bus_attr_resource_alignment static
  MAINTAINERS: Add file patterns for PCI device tree bindings
  PCI: Fix comment typo

* pci/msi:
  PCI/MSI: irqchip: Fix PCI_MSI dependencies

* pci/pm:
  PCI: pciehp: Ignore interrupts during D3cold
  PCI: Document connection between pci_power_t and hardware PM capability
  PCI: Add runtime PM support for PCIe ports
  ACPI / hotplug / PCI: Runtime resume bridge before rescan
  PCI: Power on bridges before scanning new devices
  PCI: Put PCIe ports into D3 during suspend
  PCI: Don't clear d3cold_allowed for PCIe ports
  PCI / PM: Enforce type casting for pci_power_t

* pci/virtualization:
  PCI: Add ACS quirk for Solarflare SFC9220
  PCI: Add DMA alias quirk for Adaptec 3805
  PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
  PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-08-01 12:23:31 -05:00
Keith Busch
e16b466059 PCI: Allow additional bus numbers for hotplug bridges
A user may hot add a switch requiring more than one bus to enumerate.  This
previously required a system reboot if BIOS did not sufficiently pad the
bus resource, which they frequently don't do.

Add a kernel parameter so a user can specify the minimum number of bus
numbers to reserve for a hotplug bridge's subordinate buses so rebooting
won't be necessary.

The default is 1, which is equivalent to previous behavior.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25 12:52:47 -05:00
Andy Shevchenko
6ec39cf5cd PCI / PM: check all fields in pci_set_platform_pm()
When assign new PCI platform PM operations check for all mandatory fields to
prevent NULL pointer dereference.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 22:55:53 +02:00
Ben Dooks
2a2aca316a PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
At least on arm, <asm/dma.h> does not get included when building
drivers/pci/pci.o.  This causes the following build warning which can be
fixed by including <asm/dma.h>:

  drivers/pci/pci.c:37:5: warning: symbol 'isa_dma_bridge_buggy' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-19 17:03:59 -05:00
Koehrer Mathias (ETAS/ESW5)
644a544fd9 PCI: Extending pci=resource_alignment to specify device/vendor IDs
Some uio-based PCI drivers, e.g., uio_cif do not work if the assigned PCI
memory resources are not page aligned.

By using the kernel option "pci=resource_alignment" it is possible to force
single PCI boards to use page alignment for their memory resources.
However, this is fairly cumbersome if several of these boards are in use
as the specification of the cards has to be done via PCI bus/slot/function
number which might change, e.g., by adding another board.

Extend the kernel option "pci=resource_alignment" to allow specification of
relevant devices via PCI device/vendor (and subdevice/subvendor) IDs.  The
specification of the devices via device/vendor is indicated by a leading
string "pci:" as argument to "pci=resource_alignment".  The format of the
specification is pci:<vendor>:<device>[:<subvendor>:<subdevice>]

Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-21 17:00:34 -05:00
Mika Westerberg
9d26d3a8f1 PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered.  Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.

With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:

  - The PCIe port hardware is recent enough, starting from 2015.

  - Devices connected to PCIe ports are effectively in D3cold once the port
    is transitioned to D3 (the config space is not accessible anymore and
    the link may be powered down).

  - Devices behind the PCIe port need to be allowed to transition to D3cold
    and back.  There is a way both drivers and userspace can forbid this.

  - If the device behind the PCIe port is capable of waking the system it
    needs to be able to do so from D3cold.

This patch adds a new flag to struct pci_device called 'bridge_d3'.  This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port.  When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.

Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.

Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-13 14:57:36 -05:00
Ben Dooks
21751a9a4e PCI: Make bus_attr_resource_alignment static
The symbol bus_attr_resource_alignment is not exported or declared
elsewhere, so make it static to fix the following warning:

  drivers/pci/pci.c:4900:1: warning: symbol 'bus_attr_resource_alignment' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-10 19:20:17 -05:00
Tomasz Nowicki
2ab51ddeca ARM64: PCI: Add acpi_pci_bus_find_domain_nr()
Extend pci_bus_find_domain_nr() so it can find the domain from either:

  - ACPI, via the new acpi_pci_bus_find_domain_nr() interface, or
  - DT, via of_pci_bus_find_domain_nr()

Note that this is only used for CONFIG_PCI_DOMAINS_GENERIC=y, so it does
not affect x86 or ia64.

[bhelgaas: changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-10 18:28:39 -05:00
Tomasz Nowicki
1a4f93f711 PCI: Factor DT-specific pci_bus_find_domain_nr() code out
pci_bus_find_domain_nr() retrieves the host bridge domain number in a
DT-specific way.  Rename it to of_pci_bus_find_domain_nr() to reflect that,
so we can add a corresponding function for ACPI.

[bhelgaas: changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-06-10 18:28:32 -05:00
Tomasz Nowicki
9c7cb891ec PCI: Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC
Instead of assigning bus->domain_nr inside pci_bus_assign_domain_nr(),
return the domain and let the caller do the assignment.  Rename
pci_bus_assign_domain_nr() to pci_bus_find_domain_nr() to reflect this.

No functional change intended.

[bhelgaas: changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-06-10 18:28:12 -05:00
Sinan Kaya
4d3f138459 PCI: Add pci_unmap_iospace() to unmap I/O resources
Add pci_unmap_iospace() to undo what pci_remap_iospace() did.

This is needed to support hotplug removal of host bridges that use
pci_remap_iospace().

[bhelgaas: changelog]
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-06-10 15:42:23 -05:00
Bjorn Helgaas
e257ef55ce Merge branches 'pci/arm64' and 'pci/host-hv' into next
* pci/arm64:
  PCI, of: Move PCI I/O space management to PCI core code
  PCI: generic, thunder: Use generic ECAM API
  PCI: Provide common functions for ECAM mapping

* pci/host-hv:
  PCI: hv: Add explicit barriers to config space access
2016-05-17 14:35:46 -05:00
Bjorn Helgaas
45604e68ed Merge branches 'pci/hotplug' and 'pci/resource' into next
* pci/hotplug:
  PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit

* pci/resource:
  PCI: Disable all BAR sizing for devices with non-compliant BARs
  x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
  PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
2016-05-17 14:35:38 -05:00
Alex Williamson
92efb1bd9b PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
Resource flags are exposed to userspace via the sysfs "resource" file.
lspci reads the sysfs file to determine resource properties.

Add a "BAR Equivalent Indicator" flag so lspci can distinguish between
[virtual] and [enhanced] resources.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sean O. Stalley <sean.stalley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-05-16 15:12:02 -05:00
Tomasz Nowicki
c5076cfe76 PCI, of: Move PCI I/O space management to PCI core code
No functional changes in this patch.

PCI I/O space mapping code does not depend on OF; therefore it can be moved
to PCI core code.  This way we will be able to use it, e.g., in ACPI PCI
code.

Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Liviu Dudau <Liviu.Dudau@arm.com>
2016-05-12 07:07:42 -05:00
Bjorn Helgaas
7f768544c2 Merge branches 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/ntb', 'pci/thunderbolt' and 'pci/virtualization' into next
* pci/enumeration:
  x86/PCI: Refine PCI support check in pcibios_init()

* pci/hotplug:
  PCI: acpiphp_ibm: Avoid uninitialized variable reference

* pci/misc:
  PCI: Fix spelling errors

* pci/ntb:
  PCI: Add DMA alias quirk for mic_x200_dma
  PCI: Add support for multiple DMA aliases
  PCI: Move informational printk to pci_add_dma_alias()
  PCI: Add pci_add_dma_alias() to abstract implementation

* pci/thunderbolt:
  thunderbolt: Support 1st gen Light Ridge controller
  thunderbolt: Fix typos and magic number
  PCI: Add Intel Thunderbolt device IDs

* pci/virtualization:
  PCI: Work around Intel Sunrise Point PCH incorrect ACS capability
  PCI: Reverse standard ACS vs device-specific ACS enabling
  PCI: Mark Intel i40e NIC INTx masking as broken
2016-04-25 14:35:26 -05:00
Alex Williamson
c1d61c9bb1 PCI: Reverse standard ACS vs device-specific ACS enabling
The original thought was that if a device implemented ACS, then surely
we want to use that... well, it turns out that devices can make an ACS
capability so broken that we still need to fall back to quirks.

Reverse the order of ACS enabling to give quirks first shot at it.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-19 18:24:47 -05:00
Jacek Lawrynowicz
338c3149a2 PCI: Add support for multiple DMA aliases
Solve IOMMU support issues with PCIe non-transparent bridges that use
Requester ID look-up tables (RID-LUT), e.g., the PEX8733.

The NTB connects devices in two independent PCI domains.  Devices separated
by the NTB are not able to discover each other.  A PCI packet being
forwared from one domain to another has to have its RID modified so it
appears on correct bus and completions are forwarded back to the original
domain through the NTB.  The RID is translated using a preprogrammed table
(LUT) and the PCI packet propagates upstream away from the NTB.  If the
destination system has IOMMU enabled, the packet will be discarded because
the new RID is unknown to the IOMMU.  Adding a DMA alias for the new RID
allows IOMMU to properly recognize the packet.

Each device behind the NTB has a unique RID assigned in the RID-LUT.  The
current DMA alias implementation supports only a single alias, so it's not
possible to support mutiple devices behind the NTB when IOMMU is enabled.

Enable all possible aliases on a given bus (256) that are stored in a
bitset.  Alias devfn is directly translated to a bit number.  The bitset is
not allocated for devices that have no need for DMA aliases.

More details can be found in the following article:
http://www.plxtech.com/files/pdf/technical/expresslane/RTC_Enabling%20MulitHostSystemDesigns.pdf

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
2016-04-11 14:34:32 -05:00
Bjorn Helgaas
48c830809c PCI: Move informational printk to pci_add_dma_alias()
One of the quirks that adds DMA aliases logs an informational message in
dmesg.  Move that to pci_add_dma_alias() so all users log the message
consistently.  No functional change intended (except extra message).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2016-04-11 14:34:27 -05:00
Bjorn Helgaas
f0af959337 PCI: Add pci_add_dma_alias() to abstract implementation
Add a pci_add_dma_alias() interface to encapsulate the details of adding an
alias.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2016-04-11 14:08:06 -05:00
Colin Ian King
dcbb408ac5 PCI: Fix spelling errors
Fix spelling of "initalization".

[bhelgaas: also fix pci/pci.c]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-05 12:12:45 -05:00
Linus Torvalds
63e30271b0 PCI changes for the v4.6 merge window:
Enumeration
     Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
     Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
 
   Resource management
     Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     Don't assign or reassign immutable resources (Bjorn Helgaas)
     Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
     Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
     Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
     ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
     ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
     Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
     rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
     designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
 
   Virtualization
     Wait for up to 1000ms after FLR reset (Alex Williamson)
     Support SR-IOV on any function type (Kelly Zytaruk)
     Add ACS quirk for all Cavium devices (Manish Jaggi)
 
   AER
     Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
     Restore pci_ops pointer while calling original pci_ops (David Daney)
     Fix aer_inject error codes (Jean Delvare)
     Use dev_warn() in aer_inject (Jean Delvare)
     Log actual error causes in aer_inject (Jean Delvare)
     Log aer_inject error injections (Jean Delvare)
 
   VPD
     Prevent VPD access for buggy devices (Babu Moger)
     Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
     Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
     Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
     Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
     Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
     Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
     Update VPD definitions (Hannes Reinecke)
     Allow access to VPD attributes with size 0 (Hannes Reinecke)
     Determine actual VPD size on first access (Hannes Reinecke)
 
   Generic host bridge driver
     Move structure definitions to separate header file (David Daney)
     Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
     Expose pci_host_common_probe() for use by other drivers (David Daney)
 
   Altera host bridge driver
     Fix altera_pcie_link_is_up() (Ley Foon Tan)
 
   Cavium ThunderX host bridge driver
     Add PCIe host driver for ThunderX processors (David Daney)
     Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
 
   Freescale i.MX6 host bridge driver
     Add DT bindings to configure PHY Tx driver settings (Justin Waters)
     Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
     Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
     Remove broken Gen2 workaround (Lucas Stach)
     Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
 
   Freescale Layerscape host bridge driver
     Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
 
   Intel VMD host bridge driver
     Attach VMD resources to parent domain's resource tree (Jon Derrick)
     Set bus resource start to 0 (Keith Busch)
 
   Microsoft Hyper-V host bridge driver
     Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
     Look up IRQ domain by fwnode_handle (Jake Oshins)
     Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
 
   NVIDIA Tegra host bridge driver
     Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
     Implement ->{add,remove}_bus() callbacks (Thierry Reding)
     Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
     Track bus -> CPU mapping (Thierry Reding)
     Remove misleading PHYS_OFFSET (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     ARC: Add PCI support (Joao Pinto)
     Add generic dw_pcie_wait_for_link() (Joao Pinto)
     Add default link up check if sub-driver doesn't override (Joao Pinto)
     Add driver for prototyping kits based on ARC SDP (Joao Pinto)
 
   TI Keystone host bridge driver
     Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
 
   Xilinx AXI host bridge driver
     Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
     Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
     Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
     Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
     microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
 
   Xilinx NWL host bridge driver
     Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
 
   Miscellaneous
     Check device_attach() return value always (Bjorn Helgaas)
     Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
     Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
     Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
     unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
     Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
     Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
     Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
     frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
     Move pci_dma_* helpers to common code (Christoph Hellwig)
     Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
     Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
     Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6XgMAAoJEFmIoMA60/r8Yq4P/1nNwwZPikU+9Z8k0HyGPll6
 vqXBOYj/wlbAxJTzH2weaoyUamFrwvsKaO3Vap3xHkAeTFPD/Dp0TipCCNMrZ82Z
 j1y83JJpenkRyX6ifLARCNYpOtvnvgzSrO9x7Sb2Xfqb64dPb7+jGAfOpGNzhKsO
 n1nj/L7RGx8Q6fNFGf8ANMXKTsdkdL+1pdwegjUXmD5WdOT+oW8DmqVbhyfSKwl0
 E8r4Ml2lIg7Qd5Wu5iKMIBsR0+5HEyrwV7ch92wXChwKfoRwG70qnn7FGdc0y5ZB
 XvJuj8UD5UeMxEUeoRa9SwU6wWQT3Q9e6BzMS+P+43z36SPYjMfy/Xffv054z/bY
 rQomLjuGxNLESpmfNK5JfKxWoe2YNXjHQIDWMrAHyNlwdKJbYiwPcxnZJhvOa/eB
 p0QYcGS7O43STjibG9PZhzeq8tuSJRshxi0W6iB9QlqO8qs8nJQxIO+sZj/vl4yz
 lSnswWcV9062KITl8Fe9xDw244/RTz1xSVCdldlSoDhJyeMOjRvzS8raUMyyVmbA
 YULsI3l2iCl+fwDm/T21o7hJG966oYdAmgEv7lc7BWfgEAMg//LZXvMzVvrPFB2D
 R77u/0idtOciVJrmnO/x9DnQO2hzro9SLmVH6m0+0YU4wSSpZfGn98PCrtkatOAU
 c8zT9dJgyJVE3Z7cnPJ4
 =otsF
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
2016-03-16 14:45:55 -07:00
Bjorn Helgaas
18e5e6913b Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', 'pci/virtualization' and 'pci/vpd' into next
* pci/aer:
  PCI/AER: Log aer_inject error injections
  PCI/AER: Log actual error causes in aer_inject
  PCI/AER: Use dev_warn() in aer_inject
  PCI/AER: Fix aer_inject error codes

* pci/enumeration:
  PCI: Fix broken URL for Dell biosdevname

* pci/kconfig:
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Include pci/hotplug Kconfig directly from pci/Kconfig
  PCI: Include pci/pcie/Kconfig directly from pci/Kconfig

* pci/misc:
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: Add QEMU top-level IDs for (sub)vendor & device
  unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition
  PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
  PCI: Move pci_dma_* helpers to common code
  frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration

* pci/virtualization:
  PCI: Wait for up to 1000ms after FLR reset
  PCI: Support SR-IOV on any function type

* pci/vpd:
  PCI: Prevent VPD access for buggy devices
  PCI: Sleep rather than busy-wait for VPD access completion
  PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
  PCI: Rename VPD symbols to remove unnecessary "pci22"
  PCI: Remove struct pci_vpd_ops.release function pointer
  PCI: Move pci_vpd_release() from header file to pci/access.c
  PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code
  PCI: Determine actual VPD size on first access
  PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy
  PCI: Allow access to VPD attributes with size 0
  PCI: Update VPD definitions
2016-03-15 08:55:02 -05:00
Alex Williamson
5adecf817d PCI: Wait for up to 1000ms after FLR reset
Some devices take longer than the spec indicates to return from FLR reset,
a notable case of this is Intel integrated graphics (IGD), which can often
take an additional 300ms powering down an attached LCD panel as part of the
FLR.  Allow devices up to 1000ms, testing every 100ms whether the second
dword of config space is read as -1.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-10 14:48:58 -06:00
Krzysztof =?utf-8?Q?Ha=C5=82asa?=
54c6e2dd00 PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
pci_create_root_bus() passes a "parent" pointer to
pci_bus_assign_domain_nr().  When CONFIG_PCI_DOMAINS_GENERIC is defined,
pci_bus_assign_domain_nr() dereferences that pointer.  Many callers of
pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL
pointer dereference error.

7c67470009 ("PCI: Move domain assignment from arm64 to generic code")
moved the "parent" dereference from arm64 to generic code.  Only arm64 used
that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it
always supplied a valid "parent" pointer.  Other arches supplied NULL
"parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they
used a no-op version of pci_bus_assign_domain_nr().

8c7d14746a ("ARM/PCI: Move to generic PCI domains") defined
CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use
pci_common_init(), which supplies a NULL "parent" pointer.
These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash
with a NULL pointer dereference like this while probing PCI:

  Unable to handle kernel NULL pointer dereference at virtual address 000000a4
  PC is at pci_bus_assign_domain_nr+0x10/0x84
  LR is at pci_create_root_bus+0x48/0x2e4
  Kernel panic - not syncing: Attempted to kill init!

[bhelgaas: changelog, add "Reported:" and "Fixes:" tags]
Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1
Fixes: 8c7d14746a ("ARM/PCI: Move to generic PCI domains")
Fixes: 7c67470009 ("PCI: Move domain assignment from arm64 to generic code")
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: stable@vger.kernel.org	# v4.0+
2016-03-07 14:33:16 -06:00