Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
[Build system]
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define
a fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
[Kconfig]
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files
- relax the 'imply' behavior so that symbols implied by y can become m
- make 'imply' obey 'depends on' in order to make 'imply' really weak
[Misc]
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=wT8A
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which is
necessary to build the vDSO. These new headers are included from the
kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by PPC.
- Cleanup and consolidation of the exit related code in posix CPU timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=5o9G
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
* Stop using the deprecated i2c_new_device() function
* Replace zero-length array with flexible-array member
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKmCqpbOU668PNA69Ze02AX4ItwAFAl6AX4QACgkQZe02AX4I
twCodw/9F+m/IPY7dFTIjQeJvFW/fbERMmtPBDeSW9x9Pu6ikOxz4kEieswXi8jR
gWPscKoZLDd9cQe0iMC4EZV8TEOk6pQt+J2PLxniIvw4WUngjRwrMHjgSz0QCKp0
jge03ltjlxqsZ0TY+IrgYFXC+LaGhjvZ8LT9vLLk1z4BvVasuT5JOPk2QC4kPKrn
0oymnf/ROR9QWAYDP7GMET2buCJtGkDgZFxMBy1wDNOt4r5i8t4jq4ZtNfun7uA5
5yHEEnh5smFV5/8/L+yAjwK64CYtQwgukpSjJnNfVSgoOWMtcK13BDQ5YNKhxW9O
mPBAzwS/kfGU96k/v7xuaxbT50YrG7RHpi9tX2peUowV2wbaRIu1dZIVHYQPsmp0
RMBoQCvK62jPJFJdCCiLS164C6JHM/3/wk2Z4OSDy27XEGiOSyiDpTI/KlmwdVNC
R6am3TnCwwVB1bXsrn9kMVxThQeuKJJEQp1xCbR9A+HmGO2W24L5GpoxWIdfkuc/
SrvQt2fOzqMzY02/PqQXrqdJlyqfHA/ARe/QEz8a6YU2kf+uGl/ebmH9vJm04yV3
JdpAGa0+EfVmS4/WyblUHPRq/jnTAB9opBRnNi6pHJBuWr6SeZaGdVhk5TTM3yck
eJipGlzYAWB6N7/tHYYMV6qg1ta526i0xrYpvxJ+ECJXU0uez/U=
=79Ge
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
- Fix driver auto-probing related issues
- Stop using the deprecated i2c_new_device() function
- Replace zero-length array with flexible-array member
* tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: convert to use i2c_new_client_device()
i3c: master: Replace zero-length array with flexible-array member
i3c: Simplify i3c_device_match_id()
i3c: Generate aliases for i3c modules
i3c: Add a modalias sysfs attribute
i3c: Fix MODALIAS uevents
i3c: master: no need to iterate master device twice
In the process of creating the source file of a module modpost injects a
set of includes that are not required if the compilation unit is
statically built into the kernel.
The order of inclusion of the headers can cause redefinition problems
(e.g.):
In file included from include/linux/elf.h:5:0,
from include/linux/module.h:18,
from crypto/arc4.mod.c:2:
#define ELF_OSABI ELFOSABI_LINUX
In file included from include/linux/elfnote.h:62:0,
from include/linux/build-salt.h:4,
from crypto/arc4.mod.c:1:
include/uapi/linux/elf.h:363:0: note: this is the location of
the previous definition
#define ELF_OSABI ELFOSABI_NONE
The issue was exposed during the development of the series [1].
[1] https://lore.kernel.org/lkml/20200306133242.26279-1-vincenzo.frascino@arm.com/
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lkml.kernel.org/r/20200320145351.32292-17-vincenzo.frascino@arm.com
Add uevent support to MHI bus so that the client drivers can be autoloaded
by udev when the MHI devices gets created. The client drivers are
expected to provide MODULE_DEVICE_TABLE with the MHI id_table struct so
that the alias can be exported.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: https://lore.kernel.org/r/20200220095854.4804-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535. In this case, we need to get proper section index
by .symtab_shndx section.
Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.
Fixes: 56067812d5 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Fixes: e84f9fbbec ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).
In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit bd5cbcedf4), which is over a decade ago now.
Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.
Cc: stable@vger.kernel.org
Fixes: cb9b55d21f ("modpost: add support for symbol namespaces")
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently when CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, modpost
only warns when a module is missing namespace imports. Under this
configuration, such a module cannot be loaded into the kernel anyway, as
the module loader would reject it. We might as well return a build
error when a module is missing namespace imports under
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, so that the build
warning does not go ignored/unnoticed.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rework modpost's logging interface by consolidating merror(), warn(), and
fatal() to use a single function, modpost_log(). Introduce different
logging levels (WARN, ERROR, FATAL) as well. The purpose of this cleanup is
to reduce code duplication when deciding whether or not to warn or error
out based on a condition.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8d5290149e ("[SPARC]: Deal with glibc changing macro names in
modpost.c") was more than 14 years ago. STT_SPARC_REGISTER is hopefully
defined in elf.h of recent C libraries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
When 'exported twice' is warned, let sym_add_exported() return without
updating the symbol info. This respects the previous export, which is
ordered first in modules.order
This simplifies the code too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that there is no overwrap between symbols from ELF files and
ones from Module.symvers.
So, the 'exported twice' warning should be reported irrespective
of where the symbol in question came from.
The exceptional case is external module; in some cases, we build
an external module to provide a different version/variant of the
corresponding in-kernel module, overriding the same set of exported
symbols.
You can see this use-case in upstream; tools/testing/nvdimm/libnvdimm.ko
replaces drivers/nvdimm/libnvdimm.ko in order to link it against mocked
version of core kernel symbols.
So, let's relax the 'exported twice' warning when building external
modules. The multiple export from external modules is warned only
when the previous one is from vmlinux or itself.
With this refactoring, the ugly preloading goes away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is complicated to add mocked-up symbols for pre-handling CRC.
Handle CRC after all the export symbols in the relevant module
are registered.
Call handle_modversion() after the handle_symbol() iteration.
In some cases, I see atand-alone __crc_* without __ksymtab_*.
For example, ARCH=arm allyesconfig produces __crc_ccitt_veneer and
__crc_itu_t_veneer. I guess they come from crc_ccitt, crc_itu_t,
respectively. Since __*_veneer are auto-generated symbols, just
ignore them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This function handles not only modversions, but also unresolved
symbols, export symbols, etc.
Rename it to a more proper function name.
While I was here, I also added the 'const' qualifier to *sym.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, namespace_from_kstrtabns() relies on the fact that
namespace strings are recorded in the __ksymtab_strings section.
Actually, it is coded in include/linux/export.h, but modpost does
not need to hard-code the section name.
Elf_Sym::st_shndx holds the index of the relevant section. Using it is
a more portable way to get the namespace string.
Make namespace_from_kstrtabns() simply call sym_get_data(), and delete
the info->ksymtab_strings .
While I was here, I added more 'const' qualifiers to pointers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When CONFIG_MODULE_REL_CRCS is enabled, the value of __crc_* is not
an absolute value, but the address to the CRC data embedded in the
.rodata section.
Getting the data pointed by the symbol value is somewhat complex.
Split it out into a new helper, sym_get_data().
I will reuse it to refactor namespace_from_kstrtabns() in the next
commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The local variable, ns_entry, is unneeded.
While I was here, I also cleaned up the comparison with NULL or 0.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
The modpost, with the -d option given, generates per-module .ns_deps
files.
Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.
On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.
This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:
<module_name>: <list of missing namespaces>
Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.
This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.
This also solves the stale .ns_deps problem reported by Jessica Yu:
https://lkml.org/lkml/2019/10/28/467
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
'make nsdeps' invokes the modpost three times at most; before linking
vmlinux, before building modules, and finally for generating .ns_deps
files. Running the modpost again and again is not efficient.
The last two can be unified. When the -d option is given, the modpost
still does the usual job, and in addition, generates .ns_deps files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Since commit 040fcc819a ("kbuild: improved modversioning support for
external modules"), the external module build reads Module.symvers in
the directory of the module itself, then dumps symbols back into it.
It accumulates stale symbols in the file when you build an external
module incrementally.
The idea behind it was, as the commit log explained, you can copy
Modules.symvers from one module to another when you need to pass symbol
information between two modules. However, the manual copy of the file
sounds questionable to me, and containing stale symbols is a downside.
Some time later, commit 0d96fb20b7 ("kbuild: Add new Kbuild variable
KBUILD_EXTRA_SYMBOLS") introduced a saner approach.
So, this commit removes the former one. Going forward, the external
module build dumps symbols into Module.symvers to be carried via
KBUILD_EXTRA_SYMBOLS, but never reads it automatically.
With the -I option removed, there is no one to set the external_module
flag unless KBUILD_EXTRA_SYMBOLS is passed. Now the -i option does it
instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The introduction of Symbol Namespaces changed the naming schema of the
__ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol.
That caused some breakages in tools that depend on the name layout in
either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod
would not be able to read System.map without a patch to support symbol
namespaces. A warning reported by depmod for namespaced symbols would
look like
depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks
In order to address this issue, revert to the original naming scheme and
rather read the __kstrtabns_<symbol> entries and their corresponding
values from __ksymtab_strings to update the namespace values for
symbols. After having read all symbols and handled them in
handle_modversions(), the symbols are created. In a second pass, read
the __kstrtabns_ entries and update the namespaces accordingly.
Fixes: 8651ec01da ("module: add support for symbol namespaces.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Setting the symbol namespace of a symbol within sym_add_exported feels
displaced and lead to issues in the current implementation of symbol
namespaces. This patch makes updating the namespace an explicit call to
decouple it from adding a symbol to the export list.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Let the function 'sym_update_namespace' take care of updating the
namespace for a symbol. While this currently only replaces one single
location where namespaces are updated, in a following patch, this
function will get more call sites.
The function signature is intentionally close to sym_update_crc and
taking the name by char* seems like unnecessary work as the symbol has
to be looked up again. In a later patch of this series, this concern
will be addressed.
This function ensures that symbol::namespace is either NULL or has a
valid non-empty value. Previously, the empty string was considered 'no
namespace' as well and this lead to confusion.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
- Fix broken external module builds due to a modpost bug in read_dump(),
where the namespace was not being strdup'd and sym->namespace would be
set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ebck
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
Currently, external module builds produce tons of false-positives:
WARNING: module <mod> uses symbol <sym> from namespace <ns>, but does not import it.
Here, the <ns> part shows a random string.
When you build external modules, the symbol info of vmlinux and
in-kernel modules are read from $(objtree)/Module.symvers, but
read_dump() is buggy in multiple ways:
[1] When the modpost is run for vmlinux and in-kernel modules,
sym_extract_namespace() allocates memory for the namespace. On the
other hand, read_dump() does not, then sym->namespace will point to
somewhere in the line buffer of get_next_line(). The data in the
buffer will be replaced soon, and sym->namespace will end up with
pointing to unrelated data. As a result, check_exports() will show
random strings in the warning messages.
[2] When there is no namespace, sym_extract_namespace() returns NULL.
On the other hand, read_dump() sets namespace to an empty string "".
(but, it will be later replaced with unrelated data due to bug [1].)
The check_exports() shows a warning unless exp->namespace is NULL,
so every symbol read from read_dump() emits the warning, which is
mostly false positive.
To address [1], sym_add_exported() calls strdup() for s->namespace.
The namespace from sym_extract_namespace() must be freed to avoid
memory leak.
For [2], I changed the if-conditional in check_exports().
This commit also fixes sym_add_exported() to set s->namespace correctly
when the symbol is preloaded.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Currently, EXPORT_SYMBOL_NS(_GPL) constructs the kernel symbol as
follows:
__ksymtab_SYMBOL.NAMESPACE
The sym_extract_namespace() in modpost allocates memory for the part
SYMBOL.NAMESPACE when '.' is contained. One problem is that the pointer
returned by strdup() is lost because the symbol name will be copied to
malloc'ed memory by alloc_symbol(). No one will keep track of the
pointer of strdup'ed memory.
sym->namespace still points to the NAMESPACE part. So, you can free it
with complicated code like this:
free(sym->namespace - strlen(sym->name) - 1);
It complicates memory free.
To fix it elegantly, I swapped the order of the symbol and the
namespace as follows:
__ksymtab_NAMESPACE.SYMBOL
then, simplified sym_extract_namespace() so that it allocates memory
only for the NAMESPACE part.
I prefer this order because it is intuitive and also matches to major
languages. For example, NAMESPACE::NAME in C++, MODULE.NAME in Python.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Johannes Berg reports lots of modpost warnings on ARCH=um builds:
WARNING: "rename" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "lseek" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "ftruncate64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "getuid" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "lseek64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "unlink" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "pwrite64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "close" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "opendir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "pread64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "syscall" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "readdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "readdir64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "futimes" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__lxstat" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "write" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "closedir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__xstat" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fsync" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__lxstat64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__fxstat64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "telldir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "printf" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "readlink" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__sprintf_chk" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "link" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "rmdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fdatasync" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "truncate" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "statfs" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__errno_location" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__xmknod" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "open64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "truncate64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "open" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "read" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "chown" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "chmod" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "utime" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fchmod" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "seekdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "ioctl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "dup2" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "statfs64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "utimes" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "mkdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fchown" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__guard" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "symlink" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "access" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__stack_smash_handler" [vmlinux] is a static EXPORT_SYMBOL
When you run "make", the modpost is run twice; before linking vmlinux,
and before building modules. All the warnings above are from the second
modpost.
The offending symbols are defined not in vmlinux, but in the C library.
The first modpost is run against the relocatable vmlinux.o, and those
warnings are nicely suppressed because the SH_UNDEF entries from the
symbol table clear the ->is_static flag.
The second modpost is run against the executable vmlinux (+ modules),
where those symbols have been resolved, but the definitions do not
exist.
This commit fixes it in a straightforward way; suppress the static
EXPORT_SYMBOL warnings from "vmlinux".
Without this commit, we see valid warnings twice anyway. For example,
ARCH=arm64 defconfig shows the following warning twice:
WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL
So, it is reasonable to suppress the second one.
Fixes: 15bfc2348d ("modpost: check for static EXPORT_SYMBOL* functions")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Denis Efremov <efremov@linux.com>
Summary of modules changes for the 5.4 merge window:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing kernel
developers to better manage the export surface, allow subsystem
maintainers to explicitly state that usage of some exported symbols
should only be limited to certain users (think: inter-module or
inter-driver symbols, debugging symbols, etc), as well as more easily
limiting the availability of namespaced symbols to other parts of the
kernel. With the module import requirement, it is also easier to spot
the misuse of exported symbols during patch review. Two new macros are
introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
thoroughly documented in Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there.
-----BEGIN PGP SIGNATURE-----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=72Uy
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
Use the __section() shorthand. This avoids escaping double-quotes,
and improves the readability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This makes *.mod.c much more readable. I confirmed depmod still
produced the same modules.dep file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch adds an option to modpost to generate a <module>.ns_deps file
per module, containing the namespace dependencies for that module.
E.g. if the linked module my-module.ko would depend on the symbol
myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created
by modpost would contain the entry MY_NS to express the namespace
dependency of my-module imposed by using the symbol myfunc.
These files can subsequently be used by static analysis tools (like
coccinelle scripts) to address issues with missing namespace imports. A
later patch of this series will introduce such a script 'nsdeps' and a
corresponding make target to automatically add missing
MODULE_IMPORT_NS() definitions to the module's sources. For that it uses
the information provided in the generated .ns_deps files.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Add support for symbols that are exported into namespaces. For that,
extract any namespace suffix from the symbol name. In addition, emit a
warning whenever a module refers to an exported symbol without
explicitly importing the namespace that it is defined in. This patch
consistently adds the namespace suffix to symbol names exported into
Module.symvers.
Example warning emitted by modpost in case of the above violation:
WARNING: module ums-usbat uses symbol usb_stor_resume from namespace
USB_STORAGE, but does not import it.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Add NOFAIL check for the strndup call, because the function
allocates memory and can return NULL. All calls to strdup in
modpost are checked with NOFAIL.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since guid_t is the recommended data type for UUIDs in
kernel (and I guess uuid_le is meant to be ultimately
replaced with it), it should be made available here as
well.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch adds a check to warn about static EXPORT_SYMBOL* functions
during the modpost. In most of the cases, a static symbol marked for
exporting is an odd combination that should be fixed either by deleting
the exporting mark or by removing the static attribute and adding the
appropriate declaration to headers.
This check could help to detect the following problems:
1. 550113d4e9 ("i2c: add newly exported functions to the header, too")
2. 54638c6eaf ("net: phy: make exported variables non-static")
3. 98ef2046f2 ("mm: remove the exporting of totalram_pages")
4. 73df167c81 ("s390/zcrypt: remove the exporting of ap_query_configuration")
5. a57caf8c52 ("sunrpc/cache: remove the exporting of cache_seq_next")
6. e4e4730698 ("crypto: skcipher - remove the exporting of skcipher_walk_next")
7. 14b4c48bb1 ("gve: Remove the exporting of gve_probe")
8. 9b79ee9773 ("scsi: libsas: remove the exporting of sas_wait_eh")
9. ...
The build time impact is very limited and is almost at the unnoticeable
level (< 1 sec).
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current format of *.mod is like this:
line 1: directory path to the .ko file
line 2: a list of objects linked into this module
line 3: unresolved symbols (only when CONFIG_TRIM_UNUSED_KSYMS=y)
Now that *.mod and *.ko are created in the same directory, the line 1
provides no valuable information. It can be derived by replacing the
extension .mod with .ko. In fact, nobody uses the first line any more.
Cut down the first line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Fix commit 56067812d5 ("kbuild: modversions: add infrastructure for
emitting relative CRCs") where CRCs are interpreted in host byte order
rather than proper kernel byte order. The bug is conditional on
CONFIG_MODULE_REL_CRCS.
For example, when loading a BE module into a BE kernel compiled with a LE
system, the error "disagrees about version of symbol module_layout" is
produced. A message such as "Found checksum D7FA6856 vs module 5668FAD7"
will be given with debug enabled, which indicates an obvious endian
problem within __kcrctab within the kernel image.
The general solution is to use the macro TO_NATIVE, as is done in
similar cases throughout modpost.c. With this correction it has been
verified that a BE kernel compiled with a LE system accepts BE modules.
This change has also been verified with a LE kernel compiled with a LE
system, in which case TO_NATIVE returns its value unmodified since the
byte orders match. This is by far the common case.
Fixes: 56067812d5 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Unless CONFIG_DEBUG_SECTION_MISMATCH is enabled, modpost only shows
the number of section mismatches.
If you want to know the symbols causing the issue, you need to rebuild
with CONFIG_DEBUG_SECTION_MISMATCH. It is tedious.
I think it is fine to show annoying warning when a new section mismatch
comes in.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Use MODULE_DEVICE_TABLE across several wmi drivers, keeping
wmi_device_id and MODULE_ALIAS() declarations in sync. Add several
Ideapad models to the no_hw_rfkill list. Add support for new Mellanox
platforms, including new fan and LED functionality. Address Dell
keyboard backlight change event and power button release issues. Update
dell_rbu to use appropriate memory allocation mechanisms. Several small
fixes and Ice Lake support for intel_pmc_core. Fix a suspend regression
for Cherry Trail based devices in intel_int0002_vgpio. A few other
routine fixes.
The following is an automated git shortlog grouped by driver:
ACPI / scan:
- Create platform device for BSG2150 ACPI nodes
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
- Correct mlxreg-io KernelVersion for 5.0
MAINTAINERS:
- Include mlxreg.h in Mellanox Platform Driver files
asus-wmi:
- Allow loading on systems without the Asus Management GUID
dell-smbios-wmi:
- use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
dell-wmi:
- use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
- Ignore new keyboard backlight change event
dell-wmi-descriptor:
- use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
dell_rbu:
- fix lock imbalance in img_update_realloc
- stop abusing the DMA API
huawei-wmi:
- use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
ideapad-laptop:
- Add ideapad 330-15ICH to no_hw_rfkill
- Add S130-14IGM to no_hw_rfkill list
- Add Ideapad 530S-14ARR to no_hw_rfkill list
- Add Yoga C930 to no_hw_rfkill_list
- Add Y530-I5ICH-1060 to no_hw_rfkill list
- Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
intel-hid:
- Missing power button release on some Dell models
intel-wmi-thunderbolt:
- use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
intel_int0002_vgpio:
- Only implement irq_set_wake on Bay Trail
intel_pmc_core:
- Quirk to ignore XTAL shutdown
- Add Package cstates residency info
- Add ICL platform support
- Convert to INTEL_CPU_FAM6 macro
- Avoid a u32 overflow
- Include Reserved IP for LTR
- Fix file permissions for ltr_show
- Fix PCH IP name
- Fix PCH IP sts reading
- Handle CFL regmap properly
leds:
- mlxreg: Add support for capability register
mlx-platform:
- Fix access mode for fan_dir attribute
- Add UID LED for the next generation systems
- Add extra CPLD for next generation systems
- Add support for new VMOD0007 board name
- Add support for fan capability registers
- Add support for fan direction register
modpost:
- file2alias: define size of alias
platform/mellanox:
- mlxreg-hotplug: Fix KASAN warning
platform_data/mlxreg:
- Add capability field to core platform data
- Document fixes for core platform data
touchscreen_dmi:
- Add info for the CHUWI Hi10 Air tablet
- Add info for the Chuwi Hi8 Air tablet
- Add info for the PoV Wintab P1006w (v1.0) tablet
wmi:
- add WMI support to MODULE_DEVICE_TABLE()
- move struct wmi_device_id to mod_devicetable.h
- fix potential null pointer dereference
wmi-bmof:
- use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
x86/CPU:
- Add Icelake model number
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9M1dh6j+oEL41EZIXFIlAfdBhuEFAlyCu1EACgkQXFIlAfdB
huFASAf/d0Y6uqhLD3G7cL2kXjOWoTE9ouWUwv19bBpnohGmD3OMMap4y1lb6nRR
thCJRhpmX4ObS2adAC4otiOxTzmVoYGsuS9kfBwhKIby2VYHCCxxaTUs6bzMdOfV
GsbaMA+vfb29bU4DcWlRtYZIz2FC5oyjW4ZmcMA6KtuBGjG9K1fG5zANQe4H8I0e
zCdcrXhpDGIBJgaJR2N42EUCJruPoEXYfHa1G4B/QKvuW0CXHAdSE0YrN4ju+S3e
Ew9ZXhoxRaqlu+ZB7H5Kyy6Mg3ZGMzbeYyQFLk5f2yiKSTFNiqwTEJl1aE2JSpy3
g8Im+6E44/4G8QOL40g5XwmrxHw5mA==
=Bx4o
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- use MODULE_DEVICE_TABLE across several wmi drivers, keeping
wmi_device_id and MODULE_ALIAS() declarations in sync
- add several Ideapad models to the no_hw_rfkill list
- add support for new Mellanox platforms, including new fan and LED
functionality
- address Dell keyboard backlight change event and power button release
issues
- update dell_rbu to use appropriate memory allocation mechanisms
- several small fixes and Ice Lake support for intel_pmc_core
- fix a suspend regression for Cherry Trail based devices in
intel_int0002_vgpio
- a few other routine fixes
* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
platform/x86: mlx-platform: Fix access mode for fan_dir attribute
platform/x86: mlx-platform: Add UID LED for the next generation systems
platform/x86: mlx-platform: Add extra CPLD for next generation systems
platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
modpost: file2alias: define size of alias
platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
platform/x86: intel_pmc_core: Add Package cstates residency info
platform/x86: intel_pmc_core: Add ICL platform support
...
The kernel provides the macro MODULE_DEVICE_TABLE() where driver authors
can specify their device type and their array of device_ids and thereby
trigger the generation of the appropriate MODULE_ALIAS() output. This is
opposed to having to specify one MODULE_ALIAS() for each device. The WMI
device type is currently not supported.
While using MODULE_DEVICE_TABLE() does increase the complexity as well
as spreading out the implementation across the kernel, it does come with
some benefits too;
* It makes different drivers look more similar; if you can specify the
array of device_ids any device type specific input to MODULE_ALIAS()
will automatically be generated for you.
* It helps each driver avoid keeping multiple versions of the same
information in sync. That is, both the array of device_ids and the
potential multitude of MODULE_ALIAS()'s.
Add WMI support to MODULE_DEVICE_TABLE() by adding info about struct
wmi_device_id in devicetable-offsets.c and add a WMI entry point in
file2alias.c.
The type argument for MODULE_DEVICE_TABLE(type, name) is wmi.
Suggested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the
definition of struct wmi_device_id to mod_devicetable.h and inline
guid_string in the struct.
Changing guid_string to an inline char array changes the loop conditions
when looping over an array of struct wmi_device_id. Therefore update
wmi_dev_match()'s loop to check for an empty guid_string instead of a
NULL pointer.
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
[dvhart: Move UUID_STRING_LEN define to this patch]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
