Replace xfs_ioend_new_eof with a new inline xfs_new_eof helper that
doesn't require and ioend, and is available also outside of xfs_aops.c.
Also make the code a bit more clear by using a normal if statement
instead of a slightly misleading MIN().
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no reason to wake up log space waiters when unlocking inodes or
dquots, and the commit log has no explanation for this function either.
Given that we now have exact log space wakeups everywhere we can assume
the reason for this function was to paper over log space races in earlier
XFS versions.
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we use the VFS i_size field throughout XFS there is no need for the
i_new_size field any more given that the VFS i_size field gets updated
in ->write_end before unlocking the page, and thus is always uptodate when
writeback could see a page. Removing i_new_size also has the advantage that
we will never have to trim back di_size during a failed buffered write,
given that it never gets updated past i_size.
Note that currently the generic direct I/O code only updates i_size after
calling our end_io handler, which requires a small workaround to make
sure di_size actually makes it to disk. I hope to fix this properly in
the generic code.
A downside is that we lose the support for parallel non-overlapping O_DIRECT
appending writes that recently was added. I don't think keeping the complex
and fragile i_new_size infrastructure for this is a good tradeoff - if we
really care about parallel appending writers we should investigate turning
the iolock into a range lock, which would also allow for parallel
non-overlapping buffered writers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no fundamental need to keep an in-memory inode size copy in the XFS
inode. We already have the on-disk value in the dinode, and the separate
in-memory copy that we need for regular files only in the XFS inode.
Remove the xfs_inode i_size field and change the XFS_ISIZE macro to use the
VFS inode i_size field for regular files. Switch code that was directly
accessing the i_size field in the xfs_inode to XFS_ISIZE, or in cases where
we are limited to regular files direct access of the VFS inode i_size field.
This also allows dropping some fairly complicated code in the write path
which dealt with keeping the xfs_inode i_size uptodate with the VFS i_size
that is getting updated inside ->write_end.
Note that we do not bother resetting the VFS i_size when truncating a file
that gets freed to zero as there is no point in doing so because the VFS inode
is no longer in use at this point. Just relax the assert in xfs_ifree to
only check the on-disk size instead.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Replace i_pin_wait, which is only used during synchronous inode flushing
with a bit waitqueue. This trades off a much smaller inode against
slightly slower wakeup performance, and saves 12 (32-bit) or 20 (64-bit)
bytes in the XFS inode.
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
We almost never block on i_flock, the exception is synchronous inode
flushing. Instead of bloating the inode with a 16/24-byte completion
that we abuse as a semaphore just implement it as a bitlock that uses
a bit waitqueue for the rare sleeping path. This primarily is a
tradeoff between a much smaller inode and a faster non-blocking
path vs faster wakeups, and we are much better off with the former.
A small downside is that we will lose lockdep checking for i_flock, but
given that it's always taken inside the ilock that should be acceptable.
Note that for example the inode writeback locking is implemented in a
very similar way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To be used for bit wakeup i_flags needs to be an unsigned long or we'll
run into trouble on big endian systems. Because of the 1-byte i_update
field right after it this actually causes a fairly large size increase
on its own (4 or 8 bytes), but that increase will be more than offset
by the next two patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We spent a lot of effort to maintain this field, but it always equals to the
fork size divided by the constant size of an extent. The prime use of it is
to assert that the two stay in sync. Just divide the fork size by the extent
size in the few places that we actually use it and remove the overhead
of maintaining it. Also introduce a few helpers to consolidate the places
where we actually care about the value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
.. and the just as dead bhv_desc forward declaration while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This wrapper isn't overly useful, not to say rather confusing.
Around the call to xfs_itruncate_extents it does:
- add tracing
- add a few asserts in debug builds
- conditionally update the inode size in two places
- log the inode
Both the tracing and the inode logging can be moved to xfs_itruncate_extents
as they are useful for the attribute fork as well - in fact the attr code
already does an equivalent xfs_trans_log_inode call just after calling
xfs_itruncate_extents. The conditional size updates are a mess, and there
was no reason to do them in two places anyway, as the first one was
conditional on the inode having extents - but without extents we
xfs_itruncate_extents would be a no-op and the placement wouldn't matter
anyway. Instead move the size assignments and the asserts that make sense
to the callers that want it.
As a side effect of this clean up xfs_setattr_size by introducing variables
for the old and new inode size, and moving the size updates into a common
place.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we are doing synchronous inode reclaim we block the VM from making
progress in memory reclaim. So if we encouter a flush locked inode
promote it in the delwri list and wake up xfsbufd to write it out now.
Without this we can get hangs of up to 30 seconds during workloads hitting
synchronous inode reclaim.
The scheme is copied from what we do for dquot reclaims.
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Ben Myers <bpm@sgi.com>
We now have an i_dio_count filed and surrounding infrastructure to wait
for direct I/O completion instead of i_icount, and we have never needed
to iocount waits for buffered I/O given that we only set the page uptodate
after finishing all required work. Thus remove i_iocount, and replace
the actually needed waits with calls to inode_dio_wait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the transaction pointer in the inode. It's only used to avoid
passing down an argument in the bmap code, and for a few asserts in
the transaction code right now.
Also use the local variable ip in a few more places in xfs_inode_item_unlock,
so that it isn't only used for debug builds after the above change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Split the guts of xfs_itruncate_finish that loop over the existing extents
and calls xfs_bunmapi on them into a new helper, xfs_itruncate_externs.
Make xfs_attr_inactive call it directly instead of xfs_itruncate_finish,
which allows to simplify the latter a lot, by only letting it deal with
the data fork. As a result xfs_itruncate_finish is renamed to
xfs_itruncate_data to make its use case more obvious.
Also remove the sync parameter from xfs_itruncate_data, which has been
unessecary since the introduction of the busy extent list in 2002, and
completely dead code since 2003 when the XFS_BMAPI_ASYNC parameter was
made a no-op.
I can't actually see why the xfs_attr_inactive needs to set the transaction
sync, but let's keep this patch simple and without changes in behaviour.
Also avoid passing a useless argument to xfs_isize_check, and make it
private to xfs_inode.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_itruncate_start is a rather length wrapper that evaluates to a call
to xfs_ioend_wait and xfs_tosspages, and only has two callers.
Instead of using the complicated checks left over from IRIX where we
can to truncate the pagecache just call xfs_tosspages
(aka truncate_inode_pages) directly as we want to get rid of all data
after i_size, and truncate_inode_pages handles incorrect alignments
and too large offsets just fine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
XFS inodes has several per-lifetime state fields that determine the
behaviour of the inode. These state fields are not all reset when an
inode is reused from the reclaimable state.
This can lead to unexpected behaviour of the new inode such as
speculative preallocation not being truncated away in the expected
manner for local files until the inode is subsequently truncated,
freed or cycles out of the cache. It can also lead to an inode being
considered to be a filestream inode or having been truncated when
that is not the case.
Rework the reinitialisation of the inode when it is recycled to
ensure that it is pristine before it is reused. While there, also
fix the resetting of state flags in the recycling error paths so the
inode does not become unreclaimable.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The if_lastex field in struct xfs_ifork is only used as a temporary
index during xfs_bmapi and xfs_bunmapi. Instead of using the inode
fork to store it keep it local in the callchain. Fortunately this
is very easy as we already pass a stack copy of it down the whole
chain which can simplify be changed to be passed by reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The rt bitmap and summary inodes do not participate in the normal inode
locking protocol. Instead the rt bitmap inode can be locked in any
transaction involving rt allocations, and the both of the rt inodes can
be locked at the same time. Add specific lockdep subclasses for the rt
inodes to prevent lockdep from blowing up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
A long standing problem for streaming writeѕ through the NFS server
has been that the NFS server opens and closes file descriptors on an
inode for every write. The result of this behaviour is that the
->release() function is called on every close and that results in
XFS truncating speculative preallocation beyond the EOF. This has
an adverse effect on file layout when multiple files are being
written at the same time - they interleave their extents and can
result in severe fragmentation.
To avoid this problem, keep track of ->release calls made on a dirty
inode. For most cases, an inode is only going to be opened once for
writing and then closed again during it's lifetime in cache. Hence
if there are multiple ->release calls when the inode is dirty, there
is a good chance that the inode is being accessed by the NFS server.
Hence set a flag the first time ->release is called while there are
delalloc blocks still outstanding on the inode.
If this flag is set when ->release is next called, then do no
truncate away the speculative preallocation - leave it there so that
subsequent writes do not need to reallocate the delalloc space. This
will prevent interleaving of extents of different inodes written
concurrently to the same AG.
If we get this wrong, it is not a big deal as we truncate
speculative allocation beyond EOF anyway in xfs_inactive() when the
inode is thrown out of the cache.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The XFS iolock needs to be re-initialised to a new lock class before
it enters reclaim to prevent lockdep false positives. Unfortunately,
this is not sufficient protection as inodes in the XFS_IRECLAIMABLE
state can be recycled and not re-initialised before being reused.
We need to re-initialise the lock state when transfering out of
XFS_IRECLAIMABLE state to XFS_INEW, but we need to keep the same
class as if the inode was just allocated. Hence we need a specific
lockdep class variable for the iolock so that both initialisations
use the same class.
While there, add a specific class for inodes in the reclaim state so
that it is easy to tell from lockdep reports what state the inode
was in that generated the report.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch adds support for 32bit project quota identifiers.
On disk format is backward compatible with 16bit projid numbers. projid
on disk is now kept in two 16bit values - di_projid_lo (which holds the
same position as old 16bit projid value) and new di_projid_hi (takes
existing padding) and converts from/to 32bit value on the fly.
xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used
to enable PROJID32BIT support.
Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
We're not actually passing around credentials inside XFS for a while
now, so remove all xfs_cred.h with it's cred_t typedef and all
instances of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Under heavy multi-way parallel create workloads, the VFS struggles
to write back all the inodes that have been changed in age order.
The bdi flusher thread becomes CPU bound, spending 85% of it's time
in the VFS code, mostly traversing the superblock dirty inode list
to separate dirty inodes old enough to flush.
We already keep an index of all metadata changes in age order - in
the AIL - and continued log pressure will do age ordered writeback
without any extra overhead at all. If there is no pressure on the
log, the xfssyncd will periodically write back metadata in ascending
disk address offset order so will be very efficient.
Hence we can stop marking VFS inodes dirty during transaction commit
or when changing timestamps during transactions. This will keep the
inodes in the superblock dirty list to those containing data or
unlogged metadata changes.
However, the timstamp changes are slightly more complex than this -
there are a couple of places that do unlogged updates of the
timestamps, and the VFS need to be informed of these. Hence add a
new function xfs_trans_ichgtime() for transactional changes,
and leave xfs_ichgtime() for the non-transactional changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_ireclaim has to get and put te pag structure because it is only
called with the inode to reclaim. The one caller of this function
already has a reference on the pag and a pointer to is, so move the
radix tree delete to the caller and remove xfs_ireclaim completely.
This avoids a xfs_perag_get/put on every inode being reclaimed.
The overhead was noticed in a bug report at:
https://bugzilla.kernel.org/show_bug.cgi?id=16348
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_iput is just a small wrapper for xfs_iunlock + IRELE. Having this
out of line wrapper means the trace events in those two can't track
their caller properly. So just remove the wrapper and opencode the
unlock + rele in the few callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We never get an i_mode of 0 or a locked VFS inode until we pass in the
XFS_IGET_CREATE flag to xfs_iget, which makes xfs_iput_new equivalent to
xfs_iput for the only caller. In addition to that xfs_nfs_get_inode
does not even need to lock the inode given that the generation never changes
for a life inode, so just pass a 0 lock_flags to xfs_iget and release
the inode using IRELE in the error path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The block number comes from bulkstat based inode lookups to shortcut
the mapping calculations. We ar enot able to trust anything from
bulkstat, so drop the block number as well so that the correct
lookups and mappings are always done.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Inode numbers may come from somewhere external to the filesystem
(e.g. file handles, bulkstat information) and so are inherently
untrusted. Rename the flag we use for these lookups to make it
obvious we are doing a lookup of an untrusted inode number and need
to verify it completely before trying to read it from disk.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Inodes are only pinned/unpinned via the inode item methods, and lots of
code relies on that fact. So remove the separate xfs_ipin/xfs_iunpin
helpers and merge them into their only callers. This also fixes up
various duplicate and/or incorrect comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Allow us to track the difference between timestamp and size updates
by using mark_inode_dirty from the I/O completion code, and checking
the VFS inode flags in xfs_file_fsync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We currently do background inode flush asynchronously, resulting in
inodes being written in whatever order the background writeback
issues them. Not only that, there are also blocking and non-blocking
asynchronous inode flushes, depending on where the flush comes from.
This patch completely removes asynchronous inode writeback. It
removes all the strange writeback modes and replaces them with
either a synchronous flush or a non-blocking delayed write flush.
That is, inode flushes will only issue IO directly if they are
synchronous, and background flushing may do nothing if the operation
would block (e.g. on a pinned inode or buffer lock).
Delayed write flushes will now result in the inode buffer sitting in
the delwri queue of the buffer cache to be flushed by either an AIL
push or by the xfsbufd timing out the buffer. This will allow
accumulation of dirty inode buffers in memory and allow optimisation
of inode cluster writeback at the xfsbufd level where we have much
greater queue depths than the block layer elevators. We will also
get adjacent inode cluster buffer IO merging for free when a later
patch in the series allows sorting of the delayed write buffers
before dispatch.
This effectively means that any inode that is written back by
background writeback will be seen as flush locked during AIL
pushing, and will result in the buffers being pushed from there.
This writeback path is currently non-optimal, but the next patch
in the series will fix that problem.
A side effect of this delayed write mechanism is that background
inode reclaim will no longer directly flush inodes, nor can it wait
on the flush lock. The result is that inode reclaim must leave the
inode in the reclaimable state until it is clean. Hence attempts to
reclaim a dirty inode in the background will simply skip the inode
until it is clean and this allows other mechanisms (i.e. xfsbufd) to
do more optimal writeback of the dirty buffers. As a result, the
inode reclaim code has been rewritten so that it no longer relies on
the ambiguous return values of xfs_iflush() to determine whether it
is safe to reclaim an inode.
Portions of this patch are derived from patches by Christoph
Hellwig.
Version 2:
- cleanup reclaim code as suggested by Christoph
- log background reclaim inode flush errors
- just pass sync flags to xfs_iflush
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A.K.A.: don't rely on xfs_iflush() return value in reclaim
We have gradually been moving checks out of the reclaim code because
they are duplicated in xfs_iflush(). We've had a history of problems
in this area, and many of them stem from the overloading of the
return values from xfs_iflush() and interaction with inode flush
locking to determine if the inode is safe to reclaim.
With the desire to move to delayed write flushing of inodes and
non-blocking inode tree reclaim walks, the overloading of the
return value of xfs_iflush makes it very difficult to determine
the correct thing to do next.
This patch explicitly re-adds the checks to the inode reclaim code,
removing the reliance on the return value of xfs_iflush() to
determine what to do next. It also means that we can clearly
document all the inode states that reclaim must handle and hence
we can easily see that we handled all the necessary cases.
This also removes the need for the xfs_inode_clean() check in
xfs_iflush() as all callers now check this first (safely).
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.
To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:
echo 1 > /sys/kernel/debug/tracing/events/xfs/enable
or alternatively enable single events by just doing the same in one
event subdirectory, e.g.
echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable
or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail. To reads the events do a
cat /sys/kernel/debug/tracing/trace
Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ. This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
allowing us to e.g. count how often certain workloads git various
spots in XFS. Take a look at
http://lwn.net/Articles/346470/
for some examples.
Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.
And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:
fs/xfs/Makefile | 8
fs/xfs/linux-2.6/xfs_acl.c | 1
fs/xfs/linux-2.6/xfs_aops.c | 52 -
fs/xfs/linux-2.6/xfs_aops.h | 2
fs/xfs/linux-2.6/xfs_buf.c | 117 +--
fs/xfs/linux-2.6/xfs_buf.h | 33
fs/xfs/linux-2.6/xfs_fs_subr.c | 3
fs/xfs/linux-2.6/xfs_ioctl.c | 1
fs/xfs/linux-2.6/xfs_ioctl32.c | 1
fs/xfs/linux-2.6/xfs_iops.c | 1
fs/xfs/linux-2.6/xfs_linux.h | 1
fs/xfs/linux-2.6/xfs_lrw.c | 87 --
fs/xfs/linux-2.6/xfs_lrw.h | 45 -
fs/xfs/linux-2.6/xfs_super.c | 104 ---
fs/xfs/linux-2.6/xfs_super.h | 7
fs/xfs/linux-2.6/xfs_sync.c | 1
fs/xfs/linux-2.6/xfs_trace.c | 75 ++
fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++
fs/xfs/linux-2.6/xfs_vnode.h | 4
fs/xfs/quota/xfs_dquot.c | 110 ---
fs/xfs/quota/xfs_dquot.h | 21
fs/xfs/quota/xfs_qm.c | 40 -
fs/xfs/quota/xfs_qm_syscalls.c | 4
fs/xfs/support/ktrace.c | 323 ---------
fs/xfs/support/ktrace.h | 85 --
fs/xfs/xfs.h | 16
fs/xfs/xfs_ag.h | 14
fs/xfs/xfs_alloc.c | 230 +-----
fs/xfs/xfs_alloc.h | 27
fs/xfs/xfs_alloc_btree.c | 1
fs/xfs/xfs_attr.c | 107 ---
fs/xfs/xfs_attr.h | 10
fs/xfs/xfs_attr_leaf.c | 14
fs/xfs/xfs_attr_sf.h | 40 -
fs/xfs/xfs_bmap.c | 507 +++------------
fs/xfs/xfs_bmap.h | 49 -
fs/xfs/xfs_bmap_btree.c | 6
fs/xfs/xfs_btree.c | 5
fs/xfs/xfs_btree_trace.h | 17
fs/xfs/xfs_buf_item.c | 87 --
fs/xfs/xfs_buf_item.h | 20
fs/xfs/xfs_da_btree.c | 3
fs/xfs/xfs_da_btree.h | 7
fs/xfs/xfs_dfrag.c | 2
fs/xfs/xfs_dir2.c | 8
fs/xfs/xfs_dir2_block.c | 20
fs/xfs/xfs_dir2_leaf.c | 21
fs/xfs/xfs_dir2_node.c | 27
fs/xfs/xfs_dir2_sf.c | 26
fs/xfs/xfs_dir2_trace.c | 216 ------
fs/xfs/xfs_dir2_trace.h | 72 --
fs/xfs/xfs_filestream.c | 8
fs/xfs/xfs_fsops.c | 2
fs/xfs/xfs_iget.c | 111 ---
fs/xfs/xfs_inode.c | 67 --
fs/xfs/xfs_inode.h | 76 --
fs/xfs/xfs_inode_item.c | 5
fs/xfs/xfs_iomap.c | 85 --
fs/xfs/xfs_iomap.h | 8
fs/xfs/xfs_log.c | 181 +----
fs/xfs/xfs_log_priv.h | 20
fs/xfs/xfs_log_recover.c | 1
fs/xfs/xfs_mount.c | 2
fs/xfs/xfs_quota.h | 8
fs/xfs/xfs_rename.c | 1
fs/xfs/xfs_rtalloc.c | 1
fs/xfs/xfs_rw.c | 3
fs/xfs/xfs_trans.h | 47 +
fs/xfs/xfs_trans_buf.c | 62 -
fs/xfs/xfs_vnodeops.c | 8
70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Change the xfs_iext_insert / xfs_iext_remove prototypes to pass more
information which will allow pushing the trace points from the callers
into those functions. This includes folding the whichfork information
into the state variable to minimize the addition stack footprint.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
This is picking up on Felix's repost of Dave's patch to implement a
.dirty_inode method. We really need this notification because
the VFS keeps writing directly into the inode structure instead
of going through methods to update this state. In addition to
the long-known atime issue we now also have a caller in VM code
that updates c/mtime that way for shared writeable mmaps. And
I found another one that no one has noticed in practice in the FIFO
code.
So implement ->dirty_inode to set i_update_core whenever the
inode gets externally dirtied, and switch the c/mtime handling to
the same scheme we already use for atime (always picking up
the value from the Linux inode).
Note that this patch also removes the xfs_synchronize_atime call
in xfs_reclaim it was superflous as we already synchronize the time
when writing the inode via the log (xfs_inode_item_format) or the
normal buffers (xfs_iflush_int).
In addition also remove the I_CLEAR check before copying the Linux
timestamps - now that we always have the Linux inode available
we can always use the timestamps in it.
Also switch to just using file_update_time for regular reads/writes -
that will get us all optimization done to it for free and make
sure we notice early when it breaks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfs_trans_iget is a wrapper for xfs_iget that adds the inode to the
transaction after it is read. Except when the inode already is in the
inode cache, in which case it returns the existing locked inode with
increment lock recursion counts.
Now, no one in the tree every decrements these lock recursion counts,
so any user of this gets a potential double unlock when both the original
owner of the inode and the xfs_trans_iget caller unlock it. When looking
back in a git bisect in the historic XFS tree there was only one place
that decremented these counts, xfs_trans_iput. Introduced in commit
ca25df7a840f426eb566d52667b6950b92bb84b5 by Adam Sweeney in 1993,
and removed in commit 19f899a3ab155ff6a49c0c79b06f2f61059afaf3 by
Steve Lord in 2003. And as long as it didn't slip through git bisects
cracks never actually used in that time frame.
A quick audit of the callers of xfs_trans_iget shows that no caller
really relies on this behaviour fortunately - xfs_ialloc allows this
inode from disk so it must not be there before, and all the RT allocator
routines only every add each RT bitmap inode once.
In addition to removing lots of code and reducing the size of the inode
item this patch also avoids the double inode cache lookup in each
create/mkdir/mknod transaction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
The guarantees for O_SYNC are exactly the same as the ones we need to
make for an fsync call (and given that Linux O_SYNC is O_DSYNC the
equivalent is fdadatasync, but we treat both the same in XFS), except
with a range data writeout. Jan Kara has started unifying these two
path for filesystems using the generic helpers, and I've started to
look at XFS.
The actual transaction commited by xfs_fsync and xfs_write_sync_logforce
has a different transaction number, but actually is exactly the same.
We'll only use the fsync transaction going forward. One major difference
is that xfs_write_sync_logforce never issues a cache flush unless we
commit a transaction causing that as a side-effect, which is an obvious
bug in the O_SYNC handling. Second all the locking and i_update_size
vs i_update_core changes from 978b723712
never made it to xfs_write_sync_logforce, so we add them back.
To make xfs_fsync easily usable from the O_SYNC path, the filemap_fdatawait
call is moved up to xfs_file_fsync, so that we don't wait on the whole
file after we already waited for our portion in xfs_write.
We'll also use a plain call to filemap_write_and_wait_range instead
of the previous sync_page_rang which did it in two steps including
an half-hearted inode write out that doesn't help us.
Once we're done with this also remove the now useless i_update_size
tracking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
When freeing an inode that lost race getting added to the inode cache we
must not call into ->destroy_inode, because that would delete the inode
that won the race from the inode cache radix tree.
This patch uses splits a new xfs_inode_free helper out of xfs_ireclaim
and uses that plus __destroy_inode to make sure we really only free
the memory allocted for the inode that lost the race, and not mess with
the inode cache state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reported-by: Alex Samad <alex@samad.com.au>
Reported-by: Andrew Randrianasulu <randrik@mail.ru>
Reported-by: Stephane <sharnois@max-t.com>
Reported-by: Tommy <tommy@news-service.com>
Reported-by: Miah Gregory <mace@darksilence.net>
Reported-by: Gabriel Barazer <gabriel@oxeva.fr>
Reported-by: Leandro Lucarella <llucax@gmail.com>
Reported-by: Daniel Burr <dburr@fami.com.au>
Reported-by: Nickolay <newmail@spaces.ru>
Reported-by: Michael Guntsche <mike@it-loops.com>
Reported-by: Dan Carley <dan.carley+linuxkern-bugs@gmail.com>
Reported-by: Michael Ole Olsen <gnu@gmx.net>
Reported-by: Michael Weissenbacher <mw@dermichi.com>
Reported-by: Martin Spott <Martin.Spott@mgras.net>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Michael Guntsche <mike@it-loops.com>
Tested-by: Dan Carley <dan.carley+linuxkern-bugs@gmail.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead. The ondisk format is of course left
unchanged.
This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
- xfs_sb.h add the XFS_SB_VERSION2_PARENTBIT features2 that has been
around in userspace for some time
- xfs_inode.h: move a few things out of __KERNEL__ that are needed by
userspace
- xfs_mount.h: only include xfs_sync.h under __KERNEL__
- xfs_inode.c: minor whitespace fixup. I accidentaly changes this when
importing this file for use by userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
None of this code appears to be used anywhere so remove it.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move the inode tracing into xfs_iget.c / xfs_inode.h and kill xfs_vnode.c
now that it's empty.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There are a few inode flags around that aren't used anywhere, so remove
them. Also update xfsidbg to display all used inode flags correctly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Merge xfs_iextract and xfs_idestroy into xfs_ireclaim as they are never
called individually. Also rewrite most comments in this area as they
were severly out of date.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Allocate the inode in xfs_iget_cache_miss and pass it into xfs_iread. This
simplifies the error handling and allows xfs_iread to be shared with userspace
which already uses these semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Just pass down the XFS_IGET_* flags all the way down to xfs_imap instead
of translating them mid-way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Most uses of struct xfs_imap are to map and inode to a buffer. To avoid
copying around the inode location information we should just embedd a
strcut xfs_imap into the xfs_inode. To make sure it doesn't bloat an
inode the im_len is changed to a ushort, which is fine as that's what
the users exepect anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_imap is the only caller of xfs_dilocate and doesn't add any significant
value. Merge the two functions and document the various cases we have for
inode cluster lookup in the new xfs_imap.
Also remove the unused im_agblkno and im_ioffset fields from struct xfs_imap
while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
We have removed the support for old-style inode items a while ago and
xlog_recover_do_inode_trans is now only called for XFS_LI_INODE items.
That means we can remove the call to xfs_imap there and with it the
XFS_IMAP_LOOKUP that is set by all other callers. We can also mark
xfs_imap static now.
(First sent on October 21st)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only caller of xfs_itobp that doesn't have i_blkno setup is now
the initial inode read. It needs access to the whole xfs_imap so using
xfs_inotobp is not an option. Instead opencode the buffer lookup in
xfs_iread and kill all the functionality for the initial map from
xfs_itobp.
(First sent on October 21st)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Now that we have a separate xfs_icdinode_t for the in-core inode which
gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core
split - the fact that part of the structure gets logged through the inode
log item and a small part not can better be described in a comment.
All sizeof operations on the dinode_core either really wanted the
icdinode and are switched to that one, or had already added the size
of the agi unlinked list pointer. Later both will be replaced with
helpers once we get the larger CRC-enabled dinode.
Removing the data and attribute fork unions also has the advantage that
xfs_dinode.h doesn't need to pull in every header under the sun.
While we're at it also add some more comments describing the dinode
structure.
(First sent on October 7th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
i_gen is incremented in directory operations when the
directory is changed. It is never read or otherwise used
so it should be removed to help reduce the size of the
struct xfs_inode.
The patch also removes a duplicate logging of the directory
inode core. We only need to do this once per transaction
so kill the one associated with the i_gen increment.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
To make sure we free the security data inodes need to be freed using the
proper VFS helper (which we also need to export for this). We mark these
inodes bad so we can skip the flush path for them.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32398a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bulkstat only wants the dinode, offset and buffer from a given inode
number. Instead of using xfs_itobp on a fake inode which is complicated
and currently leads to leaks of the security data just use xfs_inotobp
which is designed to do exactly the kind of lookup xfs_bulkstat wants. The
only thing that's missing in xfs_inotobp is a flags paramter that let's us
pass down XFS_IMAP_BULKSTAT, but that can easily added.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32397a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Background inode reclaim is run by the xfssyncd. Move the reclaim worker
functions to be close to the sync code as the are very similar in
structure and are both run from the same background thread.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32329a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.
Version 3 o kill xfs_icount()
Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32323a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
structures.
Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32300a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now we've removed all users of the mount inode list, we can kill it. This
reduces the size of the xfs_inode by 2 pointers.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32293a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
xfs_iflush_all() walks the m_inodes list to find inodes that need
reclaiming. We already have such a list - the m_del_inodes list. Replace
xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up
xfs_finish_reclaim_all() to handle the different flush modes now needed.
Originally based on a patch from Christoph Hellwig.
Version 3 o rediff against new linux-2.6/xfs_sync.c code
Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original
code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not
XFS_IFLUSH_ASYNC, to prevent change of behaviour.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32284a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Make the existing bmap btree tracing generic so that it applies to all
btree types.
Some fragments lifted from a patch by Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.
So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When multiple inodes are locked in XFS it happens in order of the inode
number, with the everything but the first inode trylocked if any of the
previous inodes is in the AIL.
Except for the sorting of the inodes this logic is implemented in
xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry
in a particularly stupid way adds a lock roundtrip if the inode ordering
is not optimal.
This patch adds a new helper xfs_lock_two_inodes that takes two inodes and
locks them in the most optimal way according to the above locking protocol
and uses it for all places that want to lock two inodes.
The only caller of xfs_lock_inodes is xfs_rename which might lock up to
four inodes.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31772a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_vtoi() is redundant and only unsed in small sections of code.
Replace them with widely used XFS_I() inline and kill xfs_vtoi().
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31725a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In several places we directly convert from the XFS inode
to the linux (VFS) inode by a simple deference of ip->i_vnode.
We should not do this - a helper function should be used to
extract the VFS inode from the XFS inode.
Introduce the function VFS_I() to extract the VFS inode
from the XFS inode. The name was chosen to match XFS_I() which
is used to extract the XFS inode from the VFS inode.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31720a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_igrow_start just expands to xfs_zero_eof with two asserts that are
useless in the context of the only caller and some rather confusing
comments.
xfs_igrow_finish is just a few lines of code decorated again with useless
asserts and confusing comments.
Just kill those two and merge them into xfs_setattr.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31186a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
->rename already gets the target inode passed if it exits. Pass it down to
xfs_rename so that we can avoid looking it up again. Also simplify locking
as the first lock section in xfs_rename can go away now: the isdir is an
invariant over the lifetime of the inode, and new_parent and the nlink
check are namespace topology protected by i_mutex in the VFS. The projid
check needs to move into the second lock section anyway to not be racy.
Also kill the now unused xfs_dir_lookup_int and remove the now-unused
first_locked argumet to xfs_lock_inodes.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30903a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_icluster structure and replace with a radix tree lookup.
We don't need to keep a list of inodes in each cluster around anymore as
we can look them up quickly when we need to. The only time we need to do
this now is during inode writeback.
Factor the inode cluster writeback code out of xfs_iflush and convert it
to use radix_tree_gang_lookup() instead of walking a list of inodes built
when we first read in the inodes.
This remove 3 pointers from each xfs_inode structure and the xfs_icluster
structure per inode cluster. Hence we reduce the cache footprint of the
xfs_inodes by between 5-10% depending on cluster sparseness.
To be truly efficient we need a radix_tree_gang_lookup_range() call to
stop searching once we are past the end of the cluster instead of trying
to find a full cluster's worth of inodes.
Before (ia64):
$ cat /sys/slab/xfs_inode/object_size 536
After:
$ cat /sys/slab/xfs_inode/object_size 512
SGI-PV: 977460
SGI-Modid: xfs-linux-melb:xfs-kern:30502a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When pdflush is writing back inodes, it can get stuck on inode cluster
buffers that are currently under I/O. This occurs when we write data to
multiple inodes in the same inode cluster at the same time.
Effectively, delayed allocation marks the inode dirty during the data
writeback. Hence if the inode cluster was flushed during the writeback of
the first inode, the writeback of the second inode will block waiting for
the inode cluster write to complete before writing it again for the newly
dirtied inode.
Basically, we want to avoid this from happening so we don't block pdflush
and slow down all of writeback. Hence we introduce a non-blocking async
inode flush flag that pdflush uses. If this flag is set, we use
non-blocking operations (e.g. try locks) whereever we can to avoid
blocking or extra I/O being issued.
SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30501a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_refcache, it was only needed while we were still
building for 2.4 kernels.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30472a
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all direct caller of xfs_iaccess are gone we can kill xfs_iaccess
and xfs_access and just use generic_permission with a check_acl callback.
This is required for the per-mount read-only patchset in -mm to work
properly with XFS.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30370a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.
A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30098a
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The log force added in xfs_iget_core() has been a performance issue since
it was introduced for tight loops that allocate then unlink a single file.
under heavy writeback, this can introduce unnecessary latency due tothe
log I/o getting stuck behind bulk data writes.
Fix this latency problem by avoinding the need for the log force by moving
the place we mark linux inode dirty to the transaction commit rather than
on transaction completion.
This also closes a potential hole in the sync code where a linux inode is
not dirty between the time it is modified and the time the log buffer has
been written to disk.
SGI-PV: 972753
SGI-Modid: xfs-linux-melb:xfs-kern:30007a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Get rid of vnode useage in xfs_iget.c and pass Linux inode / xfs_inode
where apropinquate. And kill some useless helpers while we're at it.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29808a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.
SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Simplify vnode tracing calls by embedding function name & return addr in
the calling macro.
Also do a lot of vnode->inode renaming for consistency, while we're at it.
SGI-PV: 970335
SGI-Modid: xfs-linux-melb:xfs-kern:29650a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t
as a typedef for struct inode for the time being until all the fallout is
cleaned up.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29500a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
