Commit Graph

67 Commits

Author SHA1 Message Date
Christoph Lameter
dc322a99d3 mm: use raw_cpu ops for determining current NUMA node
With the preempt checking logic for __this_cpu_ops we will get false
positives from locations in the code that use numa_node_id.

Before the __this_cpu ops where introduced there were no checks for
preemption present either.  smp_raw_processor_id() was used.  See

  http://www.spinics.net/lists/linux-numa/msg00641.html

Therefore we need to use raw_cpu_read here to avoid false postives.

Note that this issue has been discussed in prior years.  If the process
changes nodes after retrieving the current numa node then that is
acceptable since most uses of numa_node etc are for optimization and not
for correctness.

There were suggestions to implement a raw_numa_node_id in order to do
preempt checks for numa_node_id as well.  But I think we better defer
that to another patch since that would mean investigating how
numa_node_id() is used throughout the kernel which would increase the
scope of this patchset significantly.  After all preemption was never
checked before when numa_node_id() was used.

Some sample traces:

__this_cpu_read operation in preemptible [00000000] code: login/1456
caller is __this_cpu_preempt_check+0x2b/0x2d
CPU: 0 PID: 1456 Comm: login Not tainted 3.12.0-rc4-cl-00062-g2fe80d3-dirty #185
Call Trace:
  dump_stack+0x4e/0x82
  check_preemption_disabled+0xc5/0xe0
  __this_cpu_preempt_check+0x2b/0x2d
  get_task_policy+0x1d/0x49
  get_vma_policy+0x14/0x76
  alloc_pages_vma+0x35/0xff
  handle_mm_fault+0x290/0x73b
  __do_page_fault+0x3fe/0x44d
  do_page_fault+0x9/0xc
  page_fault+0x22/0x30
  generic_file_aio_read+0x38e/0x624
  do_sync_read+0x54/0x73
  vfs_read+0x9d/0x12a
  SyS_read+0x47/0x7e
  cstar_dispatch+0x7/0x23

caller is __this_cpu_preempt_check+0x2b/0x2d
CPU: 0 PID: 1456 Comm: login Not tainted 3.12.0-rc4-cl-00062-g2fe80d3-dirty #185
Call Trace:
  dump_stack+0x4e/0x82
  check_preemption_disabled+0xc5/0xe0
  __this_cpu_preempt_check+0x2b/0x2d
  alloc_pages_current+0x8f/0xbc
  __page_cache_alloc+0xb/0xd
  __do_page_cache_readahead+0xf4/0x219
  ra_submit+0x1c/0x20
  ondemand_readahead+0x28c/0x2b4
  page_cache_sync_readahead+0x38/0x3a
  generic_file_aio_read+0x261/0x624
  do_sync_read+0x54/0x73
  vfs_read+0x9d/0x12a
  SyS_read+0x47/0x7e
  cstar_dispatch+0x7/0x23

Signed-off-by: Christoph Lameter <cl@linux.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alex Shi <alex.shi@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:13 -07:00
Jason Low
f48627e686 sched/balancing: Periodically decay max cost of idle balance
This patch builds on patch 2 and periodically decays that max value to
do idle balancing per sched domain by approximately 1% per second. Also
decay the rq's max_idle_balance_cost value.

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379096813-3032-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-20 12:03:46 +02:00
Jason Low
9bd721c55c sched/balancing: Consider max cost of idle balance per sched domain
In this patch, we keep track of the max cost we spend doing idle load balancing
for each sched domain. If the avg time the CPU remains idle is less then the
time we have already spent on idle balancing + the max cost of idle balancing
in the sched domain, then we don't continue to attempt the balance. We also
keep a per rq variable, max_idle_balance_cost, which keeps track of the max
time spent on newidle load balances throughout all its domains so that we can
determine the avg_idle's max value.

By using the max, we avoid overrunning the average. This further reduces the
chance we attempt balancing when the CPU is not idle for longer than the cost
to balance.

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379096813-3032-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-20 12:03:44 +02:00
Alex Shi
f03542a701 sched: recover SD_WAKE_AFFINE in select_task_rq_fair and code clean up
Since power saving code was removed from sched now, the implement
code is out of service in this function, and even pollute other logical.
like, 'want_sd' never has chance to be set '0', that remove the effect
of SD_WAKE_AFFINE here.

So, clean up the obsolete code, includes SD_PREFER_LOCAL.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5028F431.6000306@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-13 19:02:05 +02:00
Alex Shi
6956dc568f sched/numa: Add SD_PERFER_SIBLING to CPU domain
Commit 8e7fbcbc22 ("sched: Remove stale power aware scheduling remnants
and dysfunctional knobs") removed SD_PERFER_SIBLING from the CPU domain.

On NUMA machines this causes that load_balance() doesn't perfer LCPU in
 same physical CPU package.

It causes some actual performance regressions on our NUMA machines from
Core2 to NHM and SNB.

Adding this domain flag again recovers the performance drop.

This change doesn't have any bad impact on any of my benchmarks:
 specjbb, kbuild, fio, hackbench .. etc, on all my machines.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342765190-21540-1-git-send-email-alex.shi@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26 11:46:58 +02:00
Linus Torvalds
d79ee93de9 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The biggest change is the cleanup/simplification of the load-balancer:
  instead of the current practice of architectures twiddling scheduler
  internal data structures and providing the scheduler domains in
  colorfully inconsistent ways, we now have generic scheduler code in
  kernel/sched/core.c:sched_init_numa() that looks at the architecture's
  node_distance() parameters and (while not fully trusting it) deducts a
  NUMA topology from it.

  This inevitably changes balancing behavior - hopefully for the better.

  There are various smaller optimizations, cleanups and fixlets as well"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug
  sched: Remove stale power aware scheduling remnants and dysfunctional knobs
  sched/debug: Fix printing large integers on 32-bit platforms
  sched/fair: Improve the ->group_imb logic
  sched/nohz: Fix rq->cpu_load[] calculations
  sched/numa: Don't scale the imbalance
  sched/fair: Revert sched-domain iteration breakage
  sched/x86: Rewrite set_cpu_sibling_map()
  sched/numa: Fix the new NUMA topology bits
  sched/numa: Rewrite the CONFIG_NUMA sched domain support
  sched/fair: Propagate 'struct lb_env' usage into find_busiest_group
  sched/fair: Add some serialization to the sched_domain load-balance walk
  sched/fair: Let minimally loaded cpu balance the group
  sched: Change rq->nr_running to unsigned int
  x86/numa: Check for nonsensical topologies on real hw as well
  x86/numa: Hard partition cpu topology masks on node boundaries
  x86/numa: Allow specifying node_distance() for numa=fake
  x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly
  sched: Update documentation and comments
  sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()
2012-05-22 18:27:32 -07:00
Peter Zijlstra
8e7fbcbc22 sched: Remove stale power aware scheduling remnants and dysfunctional knobs
It's been broken forever (i.e. it's not scheduling in a power
aware fashion), as reported by Suresh and others sending
patches, and nobody cares enough to fix it properly ...
so remove it to make space free for something better.

There's various problems with the code as it stands today, first
and foremost the user interface which is bound to topology
levels and has multiple values per level. This results in a
state explosion which the administrator or distro needs to
master and almost nobody does.

Furthermore large configuration state spaces aren't good, it
means the thing doesn't just work right because it's either
under so many impossibe to meet constraints, or even if
there's an achievable state workloads have to be aware of
it precisely and can never meet it for dynamic workloads.

So pushing this kind of decision to user-space was a bad idea
even with a single knob - it's exponentially worse with knobs
on every node of the topology.

There is a proposal to replace the user interface with a single
3 state knob:

 sched_balance_policy := { performance, power, auto }

where 'auto' would be the preferred default which looks at things
like Battery/AC mode and possible cpufreq state or whatever the hw
exposes to show us power use expectations - but there's been no
progress on it in the past many months.

Aside from that, the actual implementation of the various knobs
is known to be broken. There have been sporadic attempts at
fixing things but these always stop short of reaching a mergable
state.

Therefore this wholesale removal with the hopes of spurring
people who care to come forward once again and work on a
coherent replacement.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17 13:48:56 +02:00
Alex Shi
c6ae41e7d4 x86: replace percpu_xxx funcs with this_cpu_xxx
Since percpu_xxx() serial functions are duplicated with this_cpu_xxx().
Removing percpu_xxx() definition and replacing them by this_cpu_xxx()
in code. There is no function change in this patch, just preparation for
later percpu_xxx serial function removing.

On x86 machine the this_cpu_xxx() serial functions are same as
__this_cpu_xxx() without no unnecessary premmpt enable/disable.

Thanks for Stephen Rothwell, he found and fixed a i386 build error in
the patch.

Also thanks for Andrew Morton, he kept updating the patchset in Linus'
tree.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Acked-by: Christoph Lameter <cl@gentwo.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-05-14 14:15:31 -07:00
Peter Zijlstra
cb83b629ba sched/numa: Rewrite the CONFIG_NUMA sched domain support
The current code groups up to 16 nodes in a level and then puts an
ALLNODES domain spanning the entire tree on top of that. This doesn't
reflect the numa topology and esp for the smaller not-fully-connected
machines out there today this might make a difference.

Therefore, build a proper numa topology based on node_distance().

Since there's no fixed numa layers anymore, the static SD_NODE_INIT
and SD_ALLNODES_INIT aren't usable anymore, the new code tries to
construct something similar and scales some values either on the
number of cpus in the domain and/or the node_distance() ratio.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-sh@vger.kernel.org
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: sparclinux@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Greg Pearson <greg.pearson@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: bob.picco@oracle.com
Cc: chris.mason@oracle.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-r74n3n8hhuc2ynbrnp3vt954@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09 15:00:55 +02:00
Anton Blanchard
590e4d8571 sched: Allow SD_NODES_PER_DOMAIN to be overridden
We want to override the default value of SD_NODES_PER_DOMAIN on ppc64,
so move it into linux/topology.h.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:21 +10:00
KOSAKI Motohiro
32e45ff43e mm: increase RECLAIM_DISTANCE to 30
Recently, Robert Mueller reported (http://lkml.org/lkml/2010/9/12/236)
that zone_reclaim_mode doesn't work properly on his new NUMA server (Dual
Xeon E5520 + Intel S5520UR MB).  He is using Cyrus IMAPd and it's built on
a very traditional single-process model.

  * a master process which reads config files and manages the other
    process
  * multiple imapd processes, one per connection
  * multiple pop3d processes, one per connection
  * multiple lmtpd processes, one per connection
  * periodical "cleanup" processes.

There are thousands of independent processes.  The problem is, recent
Intel motherboard turn on zone_reclaim_mode by default and traditional
prefork model software don't work well on it.  Unfortunatelly, such models
are still typical even in the 21st century.  We can't ignore them.

This patch raises the zone_reclaim_mode threshold to 30.  30 doesn't have
any specific meaning.  but 20 means that one-hop QPI/Hypertransport and
such relatively cheap 2-4 socket machine are often used for traditional
servers as above.  The intention is that these machines don't use
zone_reclaim_mode.

Note: ia64 and Power have arch specific RECLAIM_DISTANCE definitions.
This patch doesn't change such high-end NUMA machine behavior.

Dave Hansen said:

: I know specifically of pieces of x86 hardware that set the information
: in the BIOS to '21' *specifically* so they'll get the zone_reclaim_mode
: behavior which that implies.
:
: They've done performance testing and run very large and scary benchmarks
: to make sure that they _want_ this turned on.  What this means for them
: is that they'll probably be de-optimized, at least on newer versions of
: the kernel.
:
: If you want to do this for particular systems, maybe _that_'s what we
: should do.  Have a list of specific configurations that need the
: defaults overridden either because they're buggy, or they have an
: unusual hardware configuration not really reflected in the distance
: table.

And later said:

: The original change in the hardware tables was for the benefit of a
: benchmark.  Said benchmark isn't going to get run on mainline until the
: next batch of enterprise distros drops, at which point the hardware where
: this was done will be irrelevant for the benchmark.  I'm sure any new
: hardware will just set this distance to another yet arbitrary value to
: make the kernel do what it wants.  :)
:
: Also, when the hardware got _set_ to this initially, I complained.  So, I
: guess I'm getting my way now, with this patch.  I'm cool with it.

Reported-by: Robert Mueller <robm@fastmail.fm>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:03:59 -07:00
Heiko Carstens
01a08546af sched: Add book scheduling domain
On top of the SMT and MC scheduling domains this adds the BOOK scheduling
domain. This is useful for NUMA like machines which do not have an interface
which tells which piece of memory is attached to which node or where the
hardware performs striping.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100831082844.253053798@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:41:20 +02:00
Lee Schermerhorn
2510600060 topology: alternate fix for ia64 tiger_defconfig build breakage
Define stubs for the numa_*_id() generic percpu related functions for
non-NUMA configurations in <asm-generic/topology.h> where the other
non-numa stubs live.

Fixes ia64 !NUMA build breakage -- e.g., tiger_defconfig

Back out now unneeded '#ifndef CONFIG_NUMA' guards from ia64 smpboot.c

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:57 -07:00
Michael Neuling
2ec57d448b sched: Fix spelling of sibling
No logic changes, only spelling.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: linuxppc-dev@ozlabs.org
Cc: David Howells <dhowells@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <15249.1277776921@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-29 10:44:29 +02:00
Michael Neuling
532cb4c401 sched: Add asymmetric group packing option for sibling domain
Check to see if the group is packed in a sched doman.

This is primarily intended to used at the sibling level.  Some cores
like POWER7 prefer to use lower numbered SMT threads.  In the case of
POWER7, it can move to lower SMT modes only when higher threads are
idle.  When in lower SMT modes, the threads will perform better since
they share less core resources.  Hence when we have idle threads, we
want them to be the higher ones.

This adds a hook into f_b_g() called check_asym_packing() to check the
packing.  This packing function is run on idle threads.  It checks to
see if the busiest CPU in this domain (core in the P7 case) has a
higher CPU number than what where the packing function is being run
on.  If it is, calculate the imbalance and return the higher busier
thread as the busiest group to f_b_g().  Here we are assuming a lower
CPU number will be equivalent to a lower SMT thread number.

It also creates a new SD_ASYM_PACKING flag to enable this feature at
any scheduler domain level.

It also creates an arch hook to enable this feature at the sibling
level.  The default function doesn't enable this feature.

Based heavily on patch from Peter Zijlstra.
Fixes from Srivatsa Vaddagiri.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20100608045702.2936CCC897@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-09 10:34:55 +02:00
Lee Schermerhorn
7aac789885 numa: introduce numa_mem_id()- effective local memory node id
Introduce numa_mem_id(), based on generic percpu variable infrastructure
to track "nearest node with memory" for archs that support memoryless
nodes.

Define API in <linux/topology.h> when CONFIG_HAVE_MEMORYLESS_NODES
defined, else stubs.  Architectures will define HAVE_MEMORYLESS_NODES
if/when they support them.

Archs can override definitions of:

numa_mem_id() - returns node number of "local memory" node
set_numa_mem() - initialize [this cpus'] per cpu variable 'numa_mem'
cpu_to_mem()  - return numa_mem for specified cpu; may be used as lvalue

Generic initialization of 'numa_mem' occurs in __build_all_zonelists().
This will initialize the boot cpu at boot time, and all cpus on change of
numa_zonelist_order, or when node or memory hot-plug requires zonelist
rebuild.  Archs that support memoryless nodes will need to initialize
'numa_mem' for secondary cpus as they're brought on-line.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:57 -07:00
Lee Schermerhorn
7281201922 numa: add generic percpu var numa_node_id() implementation
Rework the generic version of the numa_node_id() function to use the new
generic percpu variable infrastructure.

Guard the new implementation with a new config option:

        CONFIG_USE_PERCPU_NUMA_NODE_ID.

Archs which support this new implemention will default this option to 'y'
when NUMA is configured.  This config option could be removed if/when all
archs switch over to the generic percpu implementation of numa_node_id().
Arch support involves:

  1) converting any existing per cpu variable implementations to use
     this implementation.  x86_64 is an instance of such an arch.
  2) archs that don't use a per cpu variable for numa_node_id() will
     need to initialize the new per cpu variable "numa_node" as cpus
     are brought on-line.  ia64 is an example.
  3) Defining USE_PERCPU_NUMA_NODE_ID in arch dependent Kconfig--e.g.,
     when NUMA is configured.  This is required because I have
     retained the old implementation by default to allow archs to
     be modified incrementally, as desired.

Subsequent patches will convert x86_64 and ia64 to use this implemenation.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:57 -07:00
Mike Galbraith
50b926e439 sched: Fix vmark regression on big machines
SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't
enabled, leading to many cache misses on large machines as we traverse
looking for an idle shared cache to wake to.  Change the enabler of
select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the
sibling domain level.

Reported-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1262612696.15495.15.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21 13:39:03 +01:00
Peter Zijlstra
799e2205ec sched: Disable SD_PREFER_LOCAL for MC/CPU domains
Yanmin reported that both tbench and hackbench were significantly
hurt by trying to keep tasks local on these domains, esp on small
cache machines.

So disable it in order to promote spreading outside of the cache
domains.

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255083400.8802.15.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 15:02:34 +02:00
Rusty Russell
6f401420e2 cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: core
There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-24 09:34:41 +09:30
Peter Zijlstra
182a85f8a1 sched: Disable wakeup balancing
Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't
really mind too much, SD_BALANCE_NEWIDLE picks up most of the
slack.

On a dual socket, quad core, dual thread nehalem system:

sysbench (--num_threads=16):

 SD_BALANCE_WAKE-: 13982 tx/s
 SD_BALANCE_WAKE+: 15688 tx/s

kbuild (-j16):

 SD_BALANCE_WAKE-: 47.648295846  seconds time elapsed   ( +-   0.312% )
 SD_BALANCE_WAKE+: 47.608607360  seconds time elapsed   ( +-   0.026% )

(same within noise)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 16:44:33 +02:00
Peter Zijlstra
59abf02644 sched: Add SD_PREFER_LOCAL
And turn it on for NUMA and MC domains. This improves
locality in balancing decisions by keeping up to
capacity amount of tasks local before looking for idle
CPUs. (and twice the capacity if SD_POWERSAVINGS_BALANCE
is set.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 08:42:40 +02:00
Peter Zijlstra
b8a543ea5a sched: Reduce forkexec_idx
If we're looking to place a new task, we might as well find the
idlest position _now_, not 1 tick ago.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:23 +02:00
Mike Galbraith
0ec9fab3d1 sched: Improve latencies and throughput
Make the idle balancer more agressive, to improve a
x264 encoding workload provided by Jason Garrett-Glaser:

 NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 252.82 fps, 22096.60 kb/s
 encoded 600 frames, 250.69 fps, 22096.60 kb/s
 encoded 600 frames, 245.76 fps, 22096.60 kb/s

 NO_NEXT_BUDDY LB_BIAS
 encoded 600 frames, 344.44 fps, 22096.60 kb/s
 encoded 600 frames, 346.66 fps, 22096.60 kb/s
 encoded 600 frames, 352.59 fps, 22096.60 kb/s

 NO_NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 425.75 fps, 22096.60 kb/s
 encoded 600 frames, 425.45 fps, 22096.60 kb/s
 encoded 600 frames, 422.49 fps, 22096.60 kb/s

Peter pointed out that this is better done via newidle_idx,
not via LB_BIAS, newidle balancing should look for where
there is load _now_, not where there was load 2 ticks ago.

Worst-case latencies are improved as well as no buddies
means less vruntime spread. (as per prior lkml discussions)

This change improves kbuild-peak parallelism as well.

Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1253011667.9128.16.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:16 +02:00
Peter Zijlstra
6bd7821f90 sched: Fix some domain tunings
CPU level should have WAKE_AFFINE, whereas ALLNODES is dubious.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:08 +02:00
Peter Zijlstra
78e7ed53c9 sched: Tweak wake_idx
When merging select_task_rq_fair() and sched_balance_self() we lost
the use of wake_idx, restore that and set them to 0 to make wake
balancing more aggressive.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:07 +02:00
Peter Zijlstra
c88d591089 sched: Merge select_task_rq_fair() and sched_balance_self()
The problem with wake_idle() is that is doesn't respect things like
cpu_power, which means it doesn't deal well with SMT nor the recent
RT interaction.

To cure this, it needs to do what sched_balance_self() does, which
leads to the possibility of merging select_task_rq_fair() and
sched_balance_self().

Modify sched_balance_self() to:

  - update_shares() when walking up the domain tree,
    (it only called it for the top domain, but it should
     have done this anyway), which allows us to remove
    this ugly bit from try_to_wake_up().

  - do wake_affine() on the smallest domain that contains
    both this (the waking) and the prev (the wakee) cpu for
    WAKE invocations.

Then use the top-down balance steps it had to replace wake_idle().

This leads to the dissapearance of SD_WAKE_BALANCE and
SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.

SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.

Touch all topology bits to replace the old with new SD flags --
platforms might need re-tuning, enabling SD_BALANCE_WAKE
conditionally on a NUMA distance seems like a good additional
feature, magny-core and small nehalem systems would want this
enabled, systems with slow interconnects would not.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:05 +02:00
Peter Zijlstra
a8fae3ec5f sched: enable SD_WAKE_IDLE
Now that SD_WAKE_IDLE doesn't make pipe-test suck anymore,
enable it by default for MC, CPU and NUMA domains.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-07 22:00:17 +02:00
Ingo Molnar
840a065310 sched: Turn on SD_BALANCE_NEWIDLE
Start the re-tuning of the balancer by turning on newidle.

It improves hackbench performance and parallelism on a 4x4 box.
The "perf stat --repeat 10" measurements give us:

  domain0             domain1
  .......................................
 -SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2041.273208  task-clock-msecs         #      9.354 CPUs    ( +-   0.363% )

 +SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2086.326925  task-clock-msecs         #     11.934 CPUs    ( +-   0.301% )

 +SD_BALANCE_NEWIDLE +SD_BALANCE_NEWIDLE:
   2115.289791  task-clock-msecs         #     12.158 CPUs    ( +-   0.263% )

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 11:52:54 +02:00
Ingo Molnar
47734f89be sched: Clean up topology.h
Re-organize the flag settings so that it's visible at a glance
which sched-domains flags are set and which not.

With the new balancer code we'll need to re-tune these details
anyway, so make it cleaner to make fewer mistakes down the
road ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 11:52:53 +02:00
Peter Zijlstra
a52bfd7358 sched: Add smt_gain
The idea is that multi-threading a core yields more work
capacity than a single thread, provide a way to express a
static gain for threads.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.073345955@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 10:09:54 +02:00
Rusty Russell
082edb7bf4 numa, cpumask: move numa_node_id default implementation to topology.h
Impact: cleanup, potential bugfix

Not sure what changed to expose this, but clearly that numa_node_id()
doesn't belong in mmzone.h (the inline in gfp.h is probably overkill, too).

In file included from include/linux/topology.h:34,
                 from arch/x86/mm/numa.c:2:
/home/rusty/patches-cpumask/linux-2.6/arch/x86/include/asm/topology.h:64:1: warning: "numa_node_id" redefined
In file included from include/linux/topology.h:32,
                 from arch/x86/mm/numa.c:2:
include/linux/mmzone.h:770:1: warning: this is the location of the previous definition

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mike Travis <travis@sgi.com>
LKML-Reference: <200903132343.37661.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 14:35:31 +01:00
Rusty Russell
a70f730282 cpumask: replace node_to_cpumask with cpumask_of_node.
Impact: cleanup

node_to_cpumask (and the blecherous node_to_cpumask_ptr which
contained a declaration) are replaced now everyone implements
cpumask_of_node.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:46 +10:30
Rusty Russell
fbd59a8d1f cpumask: Use topology_core_cpumask()/topology_thread_cpumask()
Impact: reduce stack usage, use new cpumask API.

This actually uses topology_core_cpumask() and
topology_thread_cpumask(), removing the only users of
topology_core_siblings() and topology_thread_siblings()

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: linux-net-drivers@solarflare.com
2009-01-11 19:12:49 +01:00
Vaidyanathan Srinivasan
100fdaee70 sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
Impact: change task balancing to save power more agressively

Add SD_BALANCE_NEWIDLE flag at MC level and CPU level
if sched_mc is set.  This helps power savings and
will not affect performance when sched_mc=0

Ingo and Mike Galbraith have optimised the SD flags by
removing SD_BALANCE_NEWIDLE at MC and CPU level.  This
helps performance but hurts power savings since this
slows down task consolidation by reducing the number
of times load_balance is run.

    sched: fine-tune SD_MC_INIT
        commit 1480098470
        Author: Mike Galbraith <efault@gmx.de>
        Date:   Fri Nov 7 15:26:50 2008 +0100

    sched: re-tune balancing -- revert
        commit 9fcd18c9e6
        Author: Ingo Molnar <mingo@elte.hu>
        Date:   Wed Nov 5 16:52:08 2008 +0100

This patch selectively enables SD_BALANCE_NEWIDLE flag
only when sched_mc is set to 1 or 2.  This helps power savings
by task consolidation and also does not hurt performance at
sched_mc=0 where all power saving optimisations are turned off.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 09:21:55 +01:00
Vaidyanathan Srinivasan
716707b299 sched: convert BALANCE_FOR_xx_POWER to inline functions
Impact: cleanup

BALANCE_FOR_MC_POWER and similar macros defined in sched.h are
not constants and have various condition checks and significant
amount of code that is not suitable to be contain in a macro.
Also there could be side effects on the expressions passed to
some of them like test_sd_parent().

This patch converts all complex macros related to power savings
balance to inline functions.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 09:21:45 +01:00
Heiko Carstens
ee79d1bdb6 sched: let arch_update_cpu_topology indicate if topology changed
Change arch_update_cpu_topology so it returns 1 if the cpu topology changed
and 0 if it didn't change. This will be useful for the next patch which adds
a call to this function in partition_sched_domains.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 13:47:21 +01:00
Ingo Molnar
52c642f33b sched: fine-tune SD_SIBLING_INIT
fine-tune the HT sched-domains parameters as well.

On a HT capable box, this increases lat_ctx performance from 23.87
usecs to 1.49 usecs:

 # before

 $ ./lat_ctx -s 0 2

   "size=0k ovr=1.89
    2 23.87

 # after

 $ ./lat_ctx -s 0 2

   "size=0k ovr=1.84
     2 1.49

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-07 16:09:23 +01:00
Mike Galbraith
1480098470 sched: fine-tune SD_MC_INIT
Tune SD_MC_INIT the same way as SD_CPU_INIT:
unset SD_BALANCE_NEWIDLE, and set SD_WAKE_BALANCE.

This improves vmark by 5%:

vmark         132102 125968 125497 messages/sec    avg 127855.66    .984
vmark         139404 131719 131272 messages/sec    avg 134131.66   1.033

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 # *DOCUMENTATION*
2008-11-07 15:35:11 +01:00
Ingo Molnar
9fcd18c9e6 sched: re-tune balancing
Impact: improve wakeup affinity on NUMA systems, tweak SMP systems

Given the fixes+tweaks to the wakeup-buddy code, re-tweak the domain
balancing defaults on NUMA and SMP systems.

Turn on SD_WAKE_AFFINE which was off on x86 NUMA - there's no reason
why we would not want to have wakeup affinity across nodes as well.
(we already do this in the standard NUMA template.)

lat_ctx on a NUMA box is particularly happy about this change:

before:

 |   phoenix:~/l> ./lat_ctx -s 0 2
 |   "size=0k ovr=2.60
 |   2 5.70

after:

 |   phoenix:~/l> ./lat_ctx -s 0 2
 |   "size=0k ovr=2.65
 |   2 2.07

a 2.75x speedup.

pipe-test is similarly happy about it too:

 |  phoenix:~/sched-tests> ./pipe-test
 |   18.26 usecs/loop.
 |   14.70 usecs/loop.
 |   14.38 usecs/loop.
 |   10.55 usecs/loop.              # +WAKE_AFFINE on domain0+domain1
 |   8.63 usecs/loop.
 |   8.59 usecs/loop.
 |   9.03 usecs/loop.
 |   8.94 usecs/loop.
 |   8.96 usecs/loop.
 |   8.63 usecs/loop.

Also:

 - disable SD_BALANCE_NEWIDLE on NUMA and SMP domains (keep it for siblings)
 - enable SD_WAKE_BALANCE on SMP domains

Sysbench+postgresql improves all around the board, quite significantly:

           .28-rc3-11474e2c  .28-rc3-11474e2c-tune
-------------------------------------------------
    1:             571              688    +17.08%
    2:            1236             1206    -2.55%
    4:            2381             2642    +9.89%
    8:            4958             5164    +3.99%
   16:            9580             9574    -0.07%
   32:            7128             8118    +12.20%
   64:            7342             8266    +11.18%
  128:            7342             8064    +8.95%
  256:            7519             7884    +4.62%
  512:            7350             7731    +4.93%
-------------------------------------------------
  SUM:           55412            59341    +6.62%

So it's a win both for the runup portion, the peak area and the tail.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05 18:04:38 +01:00
Ben Hutchings
c50cbb05a0 cpu topology: always define CPU topology information
This can result in an empty topology directory in sysfs, and requires
in-kernel users to protect all uses with #ifdef - see
<http://marc.info/?l=linux-netdev&m=120639033904472&w=2>.

The documentation of CPU topology specifies what the defaults should be if
only partial information is available from the hardware.  So we can
provide these defaults as a fallback.

This patch:

- Adds default definitions of the 4 topology macros to <linux/topology.h>
- Changes drivers/base/topology.c to use the topology macros unconditionally
  and to cope with definitions that aren't lvalues
- Updates documentation accordingly

[ From: Andrew Morton <akpm@linux-foundation.org>
  - fold now-duplicated code
  - fix layout
]

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Chandra Seetharaman <sekharan@us.ibm.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: John Hawkes <hawkes@sgi.com>
Cc: Zhang, Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-13 10:09:46 +02:00
Ingo Molnar
ea3f01f8af sched: re-tune NUMA topologies
improve the sysbench ramp-up phase and its peak throughput on
a 16way NUMA box, by turning on WAKE_AFFINE:

             tip/sched   tip/sched+wake-affine
-------------------------------------------------
    1:             700              830    +15.65%
    2:            1465             1391    -5.28%
    4:            3017             3105    +2.81%
    8:            5100             6021    +15.30%
   16:           10725            10745    +0.19%
   32:           10135            10150    +0.16%
   64:            9338             9240    -1.06%
  128:            8599             8252    -4.21%
  256:            8475             8144    -4.07%
-------------------------------------------------
  SUM:           57558            57882    +0.56%

this change also improves lat_ctx from 6.69 usecs to 1.11 usec:

  $ ./lat_ctx -s 0 2
  "size=0k ovr=1.19
  2 1.11

  $ ./lat_ctx -s 0 2
  "size=0k ovr=1.22
  2 6.69

in sysbench it's an overall win with some weakness at the lots-of-clients
side. That happens because we now under-balance this workload
a bit. To counter that effect, turn on NEWIDLE:

              wake-idle          wake-idle+newidle
 -------------------------------------------------
     1:             830              834    +0.43%
     2:            1391             1401    +0.65%
     4:            3105             3091    -0.43%
     8:            6021             6046    +0.42%
    16:           10745            10736    -0.08%
    32:           10150            10206    +0.55%
    64:            9240             9533    +3.08%
   128:            8252             8355    +1.24%
   256:            8144             8384    +2.87%
 -------------------------------------------------
   SUM:           57882            58591    +1.21%

as a bonus this not only improves the many-clients case but
also improves the (more important) rampup phase.

sysbench is a workload that quickly breaks down if the
scheduler over-balances, so since it showed an improvement
under NEWIDLE this change is definitely good.
2008-05-29 14:46:30 +02:00
Mike Travis
7c16ec585c cpumask: reduce stack usage in SD_x_INIT initializers
* Remove empty cpumask_t (and all non-zero/non-null) variables
    in SD_*_INIT macros.  Use memset(0) to clear.  Also, don't
    inline the initializer functions to save on stack space in
    build_sched_domains().

  * Merge change to include/linux/topology.h that uses the new
    node_to_cpumask_ptr function in the nr_cpus_node macro into
    this patch.

Depends on:
	[mm-patch]: asm-generic-add-node_to_cpumask_ptr-macro.patch
	[sched-devel]: sched: add new set_cpus_allowed_ptr function

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Heiko Carstens
22e52b072d sched: add arch_update_cpu_topology hook.
Will be called each time the scheduling domains are rebuild.
Needed for architectures that don't have a static cpu topology.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-21 16:43:48 +01:00
Ingo Molnar
33b0c4217d sched: tune multi-core idle balancing
WAKE_IDLE is too agressive on multi-core CPUs with the new
wake-affine code, keep it on for SMT/HT balancing alone
(where there's no cache affinity at all between logical CPUs).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-19 04:27:53 +01:00
Ingo Molnar
32525d022a sched: whitespace cleanups in topology.h
whitespace cleanups in topology.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:20 +01:00
Ingo Molnar
52d853431e sched: reactivate fork balancing
reactivate fork balancing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:20 +01:00
Ingo Molnar
7a6c6bcee0 sched: enable wake-idle on CONFIG_SCHED_MC=y
most multicore CPUs today have shared L2 caches, so tune things so
that the spreading amongst cores is more aggressive.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15 17:00:19 +02:00
Ingo Molnar
95dbb421d1 sched: reintroduce topology.h tunings
reintroduce the 2.6.22 topology.h tunings again - they result in
slightly better balancing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15 17:00:19 +02:00
Ingo Molnar
362a701663 [PATCH] sched: remove cache_hot_time
remove the last unused remains of cache_hot_time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-02 17:41:40 +02:00