Pull CIFS fixes from Steve French:
"This is a set of CIFS/SMB3 fixes for stable.
There is another set of four SMB3 reconnect fixes for stable in
progress but they are still being reviewed/tested, so didn't want to
wait any longer to send these five below"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Reset TreeId to zero on SMB2 TREE_CONNECT
CIFS: Fix build failure with smb2
Introduce cifs_copy_file_range()
SMB3: Rename clone_range to copychunk_range
Handle mismatched open calls
Pull ARM fixes from Russell King:
"A number of ARM fixes:
- prevent oopses caused by dma_get_sgtable() and declared DMA
coherent memory
- fix boot failure on nommu caused by ID_PFR1 access
- a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme
ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
arm: kprobes: Align stack to 8-bytes in test code
arm: kprobes: Fix the return address of multiple kretprobes
arm: kprobes: Skip single-stepping in recursing path if possible
arm: kprobes: Allow to handle reentered kprobe on single-stepping
Here are 3 small fixes for 4.11-rc6. One resolves a reported issue with
sysfs files that NeilBrown found, one is a documenatation fix for the
stable kernel rules, and the last is a small MAINTAINERS file update for
kernfs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWOnrMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/JQCfQKjOpGDAR9Hs6u4YQ4hJrAHFneYAn1F4MLDW
3b0ZMnlZHkDq834UwKnB
=iiei
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 small fixes for 4.11-rc6.
One resolves a reported issue with sysfs files that NeilBrown found,
one is a documenatation fix for the stable kernel rules, and the last
is a small MAINTAINERS file update for kernfs"
* tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
MAINTAINERS: separate out kernfs maintainership
sysfs: be careful of error returns from ops->show()
Documentation: stable-kernel-rules: fix stable-tag format
Here are a number of small IIO and staging driver fixes for 4.11-rc6.
Nothing big here, just iio fixes for reported issues, and an ashmem fix
for a very old bug that has been reported by a number of Android
vendors.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWOnsZA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymb4ACfSnGU4ndDTKoyTaJ7B/ZO/RF5lZUAni9d3kYF
3Ztp0ssmF8PBNvQhyIs0
=aeZf
-----END PGP SIGNATURE-----
Merge tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver rfixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 4.11-rc6.
Nothing big here, just iio fixes for reported issues, and an ashmem
fix for a very old bug that has been reported by a number of Android
vendors"
* tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
iio: hid-sensor-attributes: Fix sensor property setting failure.
iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
iio: st_pressure: initialize lps22hb bootime
iio: bmg160: reset chip when probing
iio: cros_ec_sensors: Fix return value to get raw and calibbias data.
Pull VFS fixes from Al Viro:
"statx followup fixes and a fix for stack-smashing on alpha"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha: fix stack smashing in old_adjtimex(2)
statx: Include a mask for stx_attributes in struct statx
statx: Reserve the top bit of the mask for future struct expansion
xfs: report crtime and attribute flags to statx
ext4: Add statx support
statx: optimize copy of struct statx to userspace
statx: remove incorrect part of vfs_statx() comment
statx: reject unknown flags when using NULL path
Documentation/filesystems: fix documentation for ->getattr()
kfree returns immediately on NULL so the tests are not needed.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
CC: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kfree returns immediately on NULL so the tests are not needed.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
CC: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_odm.c
drivers/staging/rtl8723bs/core/rtw_odm.c:109 rtw_odm_dbg_comp_msg() warn: if statement not indented
drivers/staging/rtl8723bs/core/rtw_odm.c:146 rtw_odm_ability_msg() warn: if statement not indented
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch lists the following:
CHECK drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:525 _mgt_dispatcher() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:1595 OnAssocReq() error: buffer overflow 'pstapriv->sta_aid' 32 <= 32
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:2391 dump_mgntframe_and_wait() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:2420 dump_mgntframe_and_wait_ack() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:4969 process_80211d() error: testing array offset 'i' after use.
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:5738 linked_status_chk() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:6459 sitesurvey_cmd_hdl() warn: inconsistent indenting
The indenting problems were fixed with white-space changes. The error at
line 1595 was the result of an off-by-one error in a for loop. The error
at line 4969 was not fixed as that code lies inside a block of code that
only is needed for 5G channels. This chip only works at 2.4 GHz.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
drivers/staging/rtl8723bs/core/rtw_sta_mgt.c:25 _rtw_init_stainfo() warn: inconsistent indenting
This problem is fixed with a white-spcae change.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_wlan_util.c
drivers/staging/rtl8723bs/core/rtw_wlan_util.c:67 cckrates_included() warn: if statement not indented
drivers/staging/rtl8723bs/core/rtw_wlan_util.c:81 cckratesonly_included() warn: if statement not indented
drivers/staging/rtl8723bs/core/rtw_wlan_util.c:815 rtw_camid_alloc() warn: should '1 << (cam_id)' be a 64 bit type?
The first two are fixed with white-space changes. The third is fixed by
restricting cam_id to be less than 32.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_mlme.c
drivers/staging/rtl8723bs/core/rtw_mlme.c:862 rtw_survey_event_callback() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme.c:1102 rtw_free_assoc_resources() warn: if statement not indented
drivers/staging/rtl8723bs/core/rtw_mlme.c:1165 rtw_indicate_disconnect() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme.c:2830 rtw_restructure_ht_ie() warn: inconsistent indenting
drivers/staging/rtl8723bs/core/rtw_mlme.c:2991 rtw_update_ht_cap() warn: inconsistent indenting
All of there are simple white-space errors. A typo is also fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_ieee80211.c
drivers/staging/rtl8723bs/core/rtw_ieee80211.c:83 rtw_is_cckrates_included() warn: if statement not indented
drivers/staging/rtl8723bs/core/rtw_ieee80211.c:98 rtw_is_cckratesonly_included() warn: if statement not indented
These warnings are fixed with white-space changes.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_ap.c
drivers/staging/rtl8723bs/core/rtw_ap.c:382 expire_timeout_chk() warn: inconsistent indenting
Fixing this requires changing the indentatikon of a long for loop.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/core/rtw_debug.c
drivers/staging/rtl8723bs/core/rtw_debug.c:454 proc_get_survey_info() error: we previously assumed 'phead' could be null (see line 453)
drivers/staging/rtl8723bs/core/rtw_debug.c:455 proc_get_survey_info() warn: variable dereferenced before check 'phead' (see line 454)
In the code, there are two successive calls to get_head(). The second
is removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch lists the following:
CHECK drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
drivers/staging/rtl8723bs/hal/hal_com_phycfg.c:2090 Hal_ChannelPlanToRegulation() warn: inconsistent indenting
Fixed by changing the white space.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
drivers/staging/rtl8723bs/hal/hal_com_phycfg.c:2090 Hal_ChannelPlanToRegulation() warn: inconsistent indenting
This warning is fixed with a white-space change.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch lists the following:
CHECK drivers/staging/rtl8723bs/hal/HalHWImg8723B_BB.c
drivers/staging/rtl8723bs/hal/HalHWImg8723B_BB.c:314 ODM_ReadAndConfig_MP_8723B_AGC_TAB() warn: for statement not indented
drivers/staging/rtl8723bs/hal/HalHWImg8723B_BB.c:583 ODM_ReadAndConfig_MP_8723B_PHY_REG() warn: for statement not indented
drivers/staging/rtl8723bs/hal/HalHWImg8723B_BB.c:586 ODM_ReadAndConfig_MP_8723B_PHY_REG() warn: inconsistent indenting
These were all fixed with white-space changes.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch logs the following:
CHECK drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:518 rtl8723b_FirmwareDownload() error: we previously assumed 'pFirmware' could be null (see line 382)
Fixing this error required a rewrite of the error exits from this routine.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch lists the following:
CHECK drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:470 rtw_cfg80211_ibss_indicate_connect() error: we previously assumed 'scanned' could be null (see line 466)
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:942 rtw_cfg80211_set_encryption() warn: inconsistent indenting
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:955 rtw_cfg80211_set_encryption() error: buffer overflow 'psecuritypriv->dot11DefKey' 4 <= 4
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:1017 rtw_cfg80211_set_encryption() error: buffer overflow 'padapter->securitypriv.dot118021XGrpKey' 5 <= 5
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:1216 cfg80211_rtw_set_default_key() warn: inconsistent indenting
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2498 rtw_cfg80211_monitor_if_xmit_entry() error: we previously assumed 'skb' could be null (see line 2495)
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2850 cfg80211_rtw_start_ap() warn: if statement not indented
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2860 cfg80211_rtw_start_ap() warn: if statement not indented
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:3417 rtw_cfg80211_preinit_wiphy() warn: inconsistent indenting
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:3547 rtw_wdev_alloc() info: ignoring unreachable code.
The indenting warnings were fixed by simple white space changes.
The section where 'scanned' could be null required an immediate exit from
the routine at that point. A similar fix was required where 'skb' could be null.
The two buffer overflow errors were caused by off-by-one errors. While
locating these problems, another one was found in os_dep/ioctl_linux.c.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following warning:
CHECK drivers/staging/rtl8723bs/os_dep/mlme_linux.c
drivers/staging/rtl8723bs/os_dep/mlme_linux.c:149 rtw_os_indicate_disconnect() warn: inconsistent indenting
Again, a simple change in the white space fixes this problem.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch logs the following warning:
CHECK drivers/staging/rtl8723bs/os_dep/os_intfs.c
drivers/staging/rtl8723bs/os_dep/os_intfs.c:1082 ips_netdrv_open() warn: inconsistent indenting
A simple change in the white space handles this warning.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch lists the following warning:
CHECK drivers/staging/rtl8723bs/os_dep/recv_linux.c
drivers/staging/rtl8723bs/os_dep/recv_linux.c:353 rtw_recv_indicatepkt() warn: variable dereferenced before check 'precv_frame' (see line 312)
This warning is fixed by removing the test at line 353.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch lists the following warning:
CHECK drivers/staging/rtl8723bs/os_dep/rtw_proc.c
drivers/staging/rtl8723bs/os_dep/rtw_proc.c:102 rtw_drv_proc_open() warn: inconsistent indenting
This warning is fixed with a simple change in the white space.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull block fixes from Jens Axboe:
"Here's a pull request for 4.11-rc, fixing a set of issues mostly
centered around the new scheduling framework. These have been brewing
for a while, but split up into what we absolutely need in 4.11, and
what we can defer until 4.12. These are well tested, on both single
queue and multiqueue setups, and with and without shared tags. They
fix several hangs that have happened in testing.
This is obviously larger than I would have preferred at this point in
time, but I don't think we can shave much off this and still get the
desired results.
In detail, this pull request contains:
- a set of five fixes for NVMe, mostly from Christoph and one from
Roland.
- a series from Bart, fixing issues with dm-mq and SCSI shared tags
and scheduling. Note that one of those patches commit messages may
read like an optimization, but it is in fact an important fix for
queue restarts in particular.
- a series from Omar, most importantly fixing a hang with multiple
hardware queues when we fail to get a driver tag. Another important
fix in there is for resizing hardware queues, which nbd does when
handling multiple sockets for one connection.
- fixing an imbalance in putting the ctx for hctx request allocations
from Minchan"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: Restart a single queue if tag sets are shared
dm rq: Avoid that request processing stalls sporadically
scsi: Avoid that SCSI queues get stuck
blk-mq: Introduce blk_mq_delay_run_hw_queue()
blk-mq: remap queues when adding/removing hardware queues
blk-mq-sched: fix crash in switch error path
blk-mq-sched: set up scheduler tags when bringing up new queues
blk-mq-sched: refactor scheduler initialization
blk-mq: use the right hctx when getting a driver tag fails
nvmet: fix byte swap in nvmet_parse_io_cmd
nvmet: fix byte swap in nvmet_execute_write_zeroes
nvmet: add missing byte swap in nvmet_get_smart_log
nvme: add missing byte swap in nvme_setup_discard
nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
block: do not put mq context in blk_mq_alloc_request_hctx
An issue was detected with pin control hos on the Freescale i.MX after
the refactorings for more general group and function handling. We now
have the proper fix for this.
-----BEGIN PGP SIGNATURE-----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=06og
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"This late fix for pin control is hopefully the last I send this cycle.
The problem was detected early in the v4.11 release cycle and there
has been some back and forth on how to solve it. Sadly the proper fix
arrives late, but at least not too late.
An issue was detected with pin control on the Freescale i.MX after the
refactorings for more general group and function handling.
We now have the proper fix for this"
* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host kernel crash
triggered by a hostile guest, but only in configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to:
Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran, Paul Mackerras.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJY6LIKAAoJEFHr6jzI4aWAhfcQAKORHx/tJf9w8KqcfSfKfeEL
O8cZEl5/N3ArNXVM5J5QK5KnMVHnoWWR3FWYwntOjt3RJywjJYJ02YvhOVvt4q+M
YinRS34KzAhnT1f526zx97v0BGqi//UJamrcFBUBTd4rLuHGbol7fdtWHVrsMYa0
KWQ+ooPLEpGDk4I3sDz37yeJBQXVpyhC/UF8vzHpvHGPvIQ8Dw8rfWwOZ0HooJuZ
ewKdkeIsYF8SrM461c1GhOI0VXB0q+CMn9mzIaEKMuZMhHDKyiaM5rm8mWXapzcT
HsCQKlF9X9YHAbhbSbz9DGvNCEYaW7T4vnudSNHjQaAJlA4HsmeRwWXy4+zqZuPc
rIbRIFZAyV3wYowN7j3P6Se3lLBDMmlHZvVkygJnwoaR4rmoujePGwdAv8ZH4Udn
hrbieC41HKVxcm5t3whIDOcHmxaAo1MDqmrVhyxJSjgnkdBtN/gnZXvHDb0VeOJV
9wFGGE8WvMXnTKEcjM2l+a14CuOrV/wRbHQ1B1O0Kfk613cPrukMYab6eLPqyJzF
lmkCm1o46bib5oBOmvlqK+5oVuwNyfHmJSzvL+VOylhLVbJPmFJUhHQFssCvsTUf
k36ZAUxH4fbz1TzAPipXl+wrkE/yzthGmA9FTC9hLkYE/rzvrZt9IKowFw1mq5n/
2zFabXQBl5JBQ4hdL54f
=bTuf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.11:
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host
kernel crash triggered by a hostile guest, but only in
configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian
kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
Paul Mackerras"
* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
powerpc/mm: Add missing global TLB invalidate if cxl is active
powerpc/64: Fix flush_(d|i)cache_range() called from modules
powerpc: Don't try to fix up misaligned load-with-reservation instructions
powerpc: Disable HFSCR[TM] if TM is not supported
selftests/powerpc: Fix standalone powerpc build
In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, inputting the following command will succeed but actually the
value will be truncated:
# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat
This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the correct chip name (e.g. lsm6dsm) as suffix for iio_dev name
instead of a generic one (lsm6dsx)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The Qualcomm PM8xxx PMICs contain a simpler ADC than its
successors (already in the kernel as qcom-spmi-vadc.c):
the HK/XO ADC (Housekeeping/Chrystal oscillator ADC).
As far as I can understand this is equal to the PMICs
using SSBI transport and encompass PM8018, PM8038,
PM8058, and PM8921, so this is shortly named PM8xxx.
This ADC monitors a bunch of on-board voltages and the die
temperature of the PMIC itself, but it can also be routed
to convert a few external MPPs (multi-purpose pins). On
the APQ8060 DragonBoard this feature is used to let this
ADC convert an analog ALS (Ambient Light Sensor) voltage
signal from a Capella CM3605 ALS into a LUX value.
Developed and tested with APQ8060 DragonBoard based on
Ivan's driver and Rama Krishna's patches. The SPMI VADC
driver is quite different, but share enough minor
functionality that I have split out to the common file
in a previous patch.
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Rama Krishna Phani A <rphani@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The SPMI VADC and the earlier XOADC share a subset of
common code, so to be able to use the same code in both
drivers, we break out a separate file with the common code,
prefix exported functions that are no longer static with
qcom_* and bake an object qcom-spmi-vadc.o that contains both
files: qcom-vadc-common.o and qcom-spmi-vadc-core.o.
As we need to follow the procedure for making a kernel module
or compiled in object from several files, but still want to
produce the same module name, rename the qcom-spmi-vadc.c
file to qcom-spmi-vadc-core.c so we can bake the two objects
into qcom-spmi-vadc.o
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Rama Krishna Phani A <rphani@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In order to accommodate in a logical manner for the premuxed channels
in PM8921 and the similarly addressed channels in later PMICs, we
need a twocell arrangement with premux and analog mux setting as
a tuple to uniquely identify a hardware channel.
These bindings are not yet in use, so it should be fine to augment
them before we actually start using it in drivers and device trees.
This scheme came out of lengthy discussions and reverse-engineering
and reading of the few information sources we have.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Björn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This adds support for the Allwinner A33 thermal sensor.
Unlike the A10, A13 and A31, the Allwinner A33 only has one channel
which is dedicated to the thermal sensor. Moreover, its thermal sensor
does not generate interruptions, thus we only need to directly read the
register storing the temperature value.
The MFD used by the A10, A13 and A31, was created to avoid breaking the
DT binding, but since the nodes for the ADC weren't there for the A33,
it is not needed.
Though the A33 does not have an internal ADC, it has a thermal sensor
which shares the same registers with GPADC of the already supported SoCs
and almost the same bits, for the same purpose (thermal sensor).
The thermal sensor behaves exactly the same (except the presence of
interrupts or not) on the different SoCs.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This moves code used in MFD probing to a new sun4i_gpadc_probe_mfd
function.
This driver was initially written for A10, A13 and A31 SoCs which
already had a DT binding for this IP, thus we needed to use an MFD to
probe the different drivers without changing the DT binding of these
SoCs.
For SoCs that will require to create a DT binding for this IP, we can
avoid using an MFD, thus we need two separate functions: one for probing
via MFD and one for probing without MFD.
This split the code specific to MFD probing in a function separated from
the driver probe function.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add documentation for max9611 driver.
Document attributes describing value of shunt resistor installed between
RS+ and RS- voltage sense inputs.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add device tree bindings documentation for Maxim max9611/max9612 current
sense amplifier.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Separate out kernfs from driver core and add myself as a
co-maintainer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When prescaler (PSC) is 0, it means div factor is 1: counter clock
frequency is equal to input clk / (PSC + 1).
When reload value is 8 for example, counter counts 9 cycles, from 0 to 8.
This is handled in frequency write routine, by writing respectively:
- prescaler - 1 to PSC
- reload value - 1 to ARR
This fix does the opposite when reading the frequency from PSC and ARR:
- prescaler is PSC + 1
- reload value is ARR + 1
Thus, PSC may be 0, depending on requested sampling frequency (div 1).
In this case, reading freq wrongly reports 0, instead of computing and
reporting correct value.
Remove test on !psc and !arr.
Small test on stm32f4 (example on tim1_trgo), before this fix:
$ cd /sys/bus/iio/devices/triggerX
$ echo 10000 > sampling_frequency
$ cat sampling_frequency
0
After this fix:
$ echo 10000 > sampling_frequency
$ cat sampling_frequency
10000
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
ops->show() can return a negative error code.
Commit 65da3484d9 ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.
Commit 17d0774f80 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.
This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.
I can reproduce it reliably only by putting delay like
usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state
The bug can be triggered without the usleep.
Fixes: 65da3484d9 ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f80 ("sysfs: correctly handle read offset on PREALLOC attrs")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A patch documenting how to specify which kernels a particular fix should
be backported to (seemingly) inadvertently added a minus sign after the
kernel version. This particular stable-tag format had never been used
prior to this patch, and was neither present when the patch in question
was first submitted (it was added in v2 without any comment).
Drop the minus sign to avoid any confusion.
Fixes: fdc81b7910 ("stable_kernel_rules: Add clause about specification of kernel versions to patch.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Value of this variable does not changed after initialization.
Replace software_encrypt with its default value.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_software_encrypt used only once and does not changed.
Replace it with 0.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>