mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
f2842ab5b7
6330 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jens Axboe
|
f2842ab5b7 |
io_uring: enable option to only trigger eventfd for async completions
If an application is using eventfd notifications with poll to know when new SQEs can be issued, it's expecting the following read/writes to complete inline. And with that, it knows that there are events available, and don't want spurious wakeups on the eventfd for those requests. This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like IORING_REGISTER_EVENTFD, except it only triggers notifications for events that happen from async completions (IRQ, or io-wq worker completions). Any completions inline from the submission itself will not trigger notifications. Suggested-by: Mark Papadakis <markuspapadakis@icloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
fddafacee2 |
io_uring: add support for send(2) and recv(2)
This adds IORING_OP_SEND for send(2) support, and IORING_OP_RECV for recv(2) support. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
8110c1a621 |
io_uring: add support for IORING_SETUP_CLAMP
Some applications like to start small in terms of ring size, and then ramp up as needed. This is a bit tricky to do currently, since we don't advertise the max ring size. This adds IORING_SETUP_CLAMP. If set, and the values for SQ or CQ ring size exceed what we support, then clamp them at the max values instead of returning -EINVAL. Since we return the chosen ring sizes after setup, no further changes are needed on the application side. io_uring already changes the ring sizes if the application doesn't ask for power-of-two sizes, for example. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
c1ca757bd6 |
io_uring: add IORING_OP_MADVISE
This adds support for doing madvise(2) through io_uring. We assume that any operation can block, and hence punt everything async. This could be improved, but hard to make bullet proof. The async punt ensures it's safe. Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
4840e418c2 |
io_uring: add IORING_OP_FADVISE
This adds support for doing fadvise through io_uring. We assume that WILLNEED doesn't block, but that DONTNEED may block. Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
ba04291eb6 |
io_uring: allow use of offset == -1 to mean file position
This behaves like preadv2/pwritev2 with offset == -1, it'll use (and update) the current file position. This obviously comes with the caveat that if the application has multiple read/writes in flight, then the end result will not be as expected. This is similar to threads sharing a file descriptor and doing IO using the current file position. Since this feature isn't easily detectable by doing a read or write, add a feature flags, IORING_FEAT_RW_CUR_POS, to allow applications to detect presence of this feature. Reported-by: 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
3a6820f2bb |
io_uring: add non-vectored read/write commands
For uses cases that don't already naturally have an iovec, it's easier (or more convenient) to just use a buffer address + length. This is particular true if the use case is from languages that want to create a memory safe abstraction on top of io_uring, and where introducing the need for the iovec may impose an ownership issue. For those cases, they currently need an indirection buffer, which means allocating data just for this purpose. Add basic read/write that don't require the iovec. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
ce35a47a3a |
io_uring: add IOSQE_ASYNC
io_uring defaults to always doing inline submissions, if at all possible. But for larger copies, even if the data is fully cached, that can take a long time. Add an IOSQE_ASYNC flag that the application can set on the SQE - if set, it'll ensure that we always go async for those kinds of requests. Use the io-wq IO_WQ_WORK_CONCURRENT flag to ensure we get the concurrency we desire for this case. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
eddc7ef52a |
io_uring: add support for IORING_OP_STATX
This provides support for async statx(2) through io_uring. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
05f3fb3c53 |
io_uring: avoid ring quiesce for fixed file set unregister and update
We currently fully quiesce the ring before an unregister or update of the fixed fileset. This is very expensive, and we can be a bit smarter about this. Add a percpu refcount for the file tables as a whole. Grab a percpu ref when we use a registered file, and put it on completion. This is cheap to do. Upon removal of a file from a set, switch the ref count to atomic mode. When we hit zero ref on the completion side, then we know we can drop the previously registered files. When the old files have been dropped, switch the ref back to percpu mode for normal operation. Since there's a period between doing the update and the kernel being done with it, add a IORING_OP_FILES_UPDATE opcode that can perform the same action. The application knows the update has completed when it gets the CQE for it. Between doing the update and receiving this completion, the application must continue to use the unregistered fd if submitting IO on this particular file. This takes the runtime of test/file-register from liburing from 14s to about 0.7s. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
b5dba59e0c |
io_uring: add support for IORING_OP_CLOSE
This works just like close(2), unsurprisingly. We remove the file descriptor and post the completion inline, then offload the actual (potential) last file put to async context. Mark the async part of this work as uncancellable, as we really must guarantee that the latter part of the close is run. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
15b71abe7b |
io_uring: add support for IORING_OP_OPENAT
This works just like openat(2), except it can be performed async. For the normal case of a non-blocking path lookup this will complete inline. If we have to do IO to perform the open, it'll be done from async context. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
d63d1b5edb |
io_uring: add support for fallocate()
This exposes fallocate(2) through io_uring. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
4d92748373 |
Merge branch 'io_uring-5.5' into for-5.6/io_uring-vfs
Pull in compatability fix for the files_update command. * io_uring-5.5: io_uring: fix compat for IORING_REGISTER_FILES_UPDATE |
||
|
Eugene Syromiatnikov
|
1292e972ff |
io_uring: fix compat for IORING_REGISTER_FILES_UPDATE
fds field of struct io_uring_files_update is problematic with regards
to compat user space, as pointer size is different in 32-bit, 32-on-64-bit,
and 64-bit user space. In order to avoid custom handling of compat in
the syscall implementation, make fds __u64 and use u64_to_user_ptr in
order to retrieve it. Also, align the field naturally and check that
no garbage is passed there.
Fixes:
|
||
|
Jens Axboe
|
fa7773deb3 |
Merge branch 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-5.6/io_uring-vfs
Pull in Al's openat2 branch, since we'll need that for the openat2
support.
* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Documentation: path-lookup: include new LOOKUP flags
selftests: add openat2(2) selftests
open: introduce openat2(2) syscall
namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
namei: LOOKUP_NO_XDEV: block mountpoint crossing
namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
namei: LOOKUP_NO_SYMLINKS: block symlink resolution
namei: allow set_root() to produce errors
namei: allow nd_jump_link() to produce errors
nsfs: clean-up ns_get_path() signature to return int
namei: only return -ECHILD from follow_dotdot_rcu()
|
||
|
Aleksa Sarai
|
fddb5d430a |
open: introduce openat2(2) syscall
/* Background. */
For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown flags
are present[1].
This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road to
being added to openat(2).
Userspace also has a hard time figuring out whether a particular flag is
supported on a particular kernel. While it is now possible with
contemporary kernels (thanks to [3]), older kernels will expose unknown
flag bits through fcntl(F_GETFL). Giving a clear -EINVAL during
openat(2) time matches modern syscall designs and is far more
fool-proof.
In addition, the newly-added path resolution restriction LOOKUP flags
(which we would like to expose to user-space) don't feel related to the
pre-existing O_* flag set -- they affect all components of path lookup.
We'd therefore like to add a new flag argument.
Adding a new syscall allows us to finally fix the flag-ignoring problem,
and we can make it extensible enough so that we will hopefully never
need an openat3(2).
/* Syscall Prototype. */
/*
* open_how is an extensible structure (similar in interface to
* clone3(2) or sched_setattr(2)). The size parameter must be set to
* sizeof(struct open_how), to allow for future extensions. All future
* extensions will be appended to open_how, with their zero value
* acting as a no-op default.
*/
struct open_how { /* ... */ };
int openat2(int dfd, const char *pathname,
struct open_how *how, size_t size);
/* Description. */
The initial version of 'struct open_how' contains the following fields:
flags
Used to specify openat(2)-style flags. However, any unknown flag
bits or otherwise incorrect flag combinations (like O_PATH|O_RDWR)
will result in -EINVAL. In addition, this field is 64-bits wide to
allow for more O_ flags than currently permitted with openat(2).
mode
The file mode for O_CREAT or O_TMPFILE.
Must be set to zero if flags does not contain O_CREAT or O_TMPFILE.
resolve
Restrict path resolution (in contrast to O_* flags they affect all
path components). The current set of flags are as follows (at the
moment, all of the RESOLVE_ flags are implemented as just passing
the corresponding LOOKUP_ flag).
RESOLVE_NO_XDEV => LOOKUP_NO_XDEV
RESOLVE_NO_SYMLINKS => LOOKUP_NO_SYMLINKS
RESOLVE_NO_MAGICLINKS => LOOKUP_NO_MAGICLINKS
RESOLVE_BENEATH => LOOKUP_BENEATH
RESOLVE_IN_ROOT => LOOKUP_IN_ROOT
open_how does not contain an embedded size field, because it is of
little benefit (userspace can figure out the kernel open_how size at
runtime fairly easily without it). It also only contains u64s (even
though ->mode arguably should be a u16) to avoid having padding fields
which are never used in the future.
Note that as a result of the new how->flags handling, O_PATH|O_TMPFILE
is no longer permitted for openat(2). As far as I can tell, this has
always been a bug and appears to not be used by userspace (and I've not
seen any problems on my machines by disallowing it). If it turns out
this breaks something, we can special-case it and only permit it for
openat(2) but not openat2(2).
After input from Florian Weimer, the new open_how and flag definitions
are inside a separate header from uapi/linux/fcntl.h, to avoid problems
that glibc has with importing that header.
/* Testing. */
In a follow-up patch there are over 200 selftests which ensure that this
syscall has the correct semantics and will correctly handle several
attack scenarios.
In addition, I've written a userspace library[4] which provides
convenient wrappers around openat2(RESOLVE_IN_ROOT) (this is necessary
because no other syscalls support RESOLVE_IN_ROOT, and thus lots of care
must be taken when using RESOLVE_IN_ROOT'd file descriptors with other
syscalls). During the development of this patch, I've run numerous
verification tests using libpathrs (showing that the API is reasonably
usable by userspace).
/* Future Work. */
Additional RESOLVE_ flags have been suggested during the review period.
These can be easily implemented separately (such as blocking auto-mount
during resolution).
Furthermore, there are some other proposed changes to the openat(2)
interface (the most obvious example is magic-link hardening[5]) which
would be a good opportunity to add a way for userspace to restrict how
O_PATH file descriptors can be re-opened.
Another possible avenue of future work would be some kind of
CHECK_FIELDS[6] flag which causes the kernel to indicate to userspace
which openat2(2) flags and fields are supported by the current kernel
(to avoid userspace having to go through several guesses to figure it
out).
[1]: https://lwn.net/Articles/588444/
[2]: https://lore.kernel.org/lkml/CA+55aFyyxJL1LyXZeBsf2ypriraj5ut1XkNDsunRBqgVjZU_6Q@mail.gmail.com
[3]: commit
|
||
|
Linus Torvalds
|
b5b3159cff |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov: "Just a few small fixups here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_sc_key - only take the valid data from SCU firmware as key state Input: add safety guards to input_set_keycode() Input: input_event - fix struct padding on sparc64 Input: uinput - always report EPOLLOUT |
||
|
Andrey Konovalov
|
a69b83e1ae |
kcov: fix struct layout for kcov_remote_arg
Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code.
This makes it more convenient to write userspace apps that can be
compiled into 32-bit or 64-bit binaries and still work with the same
64-bit kernel.
Also use proper __u32 types in uapi headers instead of unsigned ints.
Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com
Fixes:
|
||
|
Linus Torvalds
|
78bac77b52 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
|
||
|
Arnd Bergmann
|
f729a1b0f8 |
Input: input_event - fix struct padding on sparc64
Going through all uses of timeval, I noticed that we screwed up input_event in the previous attempts to fix it: The time fields now match between kernel and user space, but all following fields are in the wrong place. Add the required padding that is implied by the glibc timeval definition to fix the layout, and use a struct initializer to avoid leaking kernel stack data. Fixes: |
||
|
Linus Torvalds
|
5bd831a469 |
io_uring-5.5-20191212
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3y5kIQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpv0MEADY9LOC2JkG2aNP53gCXGu74rFQNstJfusr xPpkMs5I7hxoeVp/bkVAvR6BbpfPDsyGMhSMURELgMFzkuw+03z2IbxVuexdGOEu X1+6EkunAq/r331fXL+cXUKJM3ThlkUBbNTuV8z5oWWSM1EfoBAWYfh2u4L4oBcc yIHRH8by9qipx+fhBWPU/ZWeCcMVt5Ju2b6PHAE/GWwteZh00PsTwq0oqQcVcm/5 4Ennr0OELb7LaZWblAIIZe96KeJuCPzGfbRV/y12Ne/t6STH/sWA1tMUzgT22Eju 27uXtwAJtoLsep4V66a4VYObs/hXmEP281wIsXEnIkX0YCvbAiM+J6qVHGjYSMGf mRrzfF6nDC1vaMduE4waoO3VFiDFQU/qfQRa21ZP50dfQOAXTpEz8kJNG/PjN1VB gmz9xsujDU1QPD7IRiTreiPPHE5AocUzlUYuYOIMt7VSbFZIMHW5S/pML93avkJt nx6g3gOP0JKkjaCEvIKY4VLljDT8eDZ/WScDsSedSbPZikMzEo8DSx4U6nbGPqzy qSljgQniDcrH8GdRaJFDXgLkaB8pu83NH7zUH+xioUZjAHq/XEzKQFYqysf1DbtU SEuSnUnLXBvbwfb3Z2VpQ/oz8G3a0nD9M7oudt1sN19oTCJKxYSbOUgNUrj9JsyQ QlAVrPKRkQ== =fbsf -----END PGP SIGNATURE----- Merge tag 'io_uring-5.5-20191212' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - A tweak to IOSQE_IO_LINK (also marked for stable) to allow links that don't sever if the result is < 0. This is mostly for linked timeouts, where if we ask for a pure timeout we always get -ETIME. This makes links useless for that case, hence allow a case where it works. - Five minor optimizations to fix and improve cases that regressed since v5.4. - An SQTHREAD locking fix. - A sendmsg/recvmsg iov assignment fix. - Net fix where read_iter/write_iter don't honor IOCB_NOWAIT, and subsequently ensuring that works for io_uring. - Fix a case where for an invalid opcode we might return -EBADF instead of -EINVAL, if the ->fd of that sqe was set to an invalid fd value. * tag 'io_uring-5.5-20191212' of git://git.kernel.dk/linux-block: io_uring: ensure we return -EINVAL on unknown opcode io_uring: add sockets to list of files that support non-blocking issue net: make socket read/write_iter() honor IOCB_NOWAIT io_uring: only hash regular files for async work execution io_uring: run next sqe inline if possible io_uring: don't dynamically allocate poll data io_uring: deferred send/recvmsg should assign iov io_uring: sqthread should grab ctx->uring_lock for submissions io-wq: briefly spin for new work after finishing work io-wq: remove worker->wait waitqueue io_uring: allow unbreakable links |
||
|
Toke Høiland-Jørgensen
|
911bde0fe5 |
mac80211: Turn AQL into an NL80211_EXT_FEATURE
Instead of just having an airtime flag in debugfs, turn AQL into a proper
NL80211_EXT_FEATURE, so drivers can turn it on when they are ready, and so
we also expose the presence of the feature to userspace.
This also has the effect of flipping the default, so drivers have to opt in
to using AQL instead of getting it by default with TXQs. To keep
functionality the same as pre-patch, we set this feature for ath10k (which
is where it is needed the most).
While we're at it, split out the debugfs interface so AQL gets its own
per-station debugfs file instead of using the 'airtime' file.
[Johannes:]
This effectively disables AQL for iwlwifi, where it fixes a number of
issues:
* TSO in iwlwifi is causing underflows and associated warnings in AQL
* HE (802.11ax) rates aren't reported properly so at HE rates, AQL could
never have a valid estimate (it'd use 6 Mbps instead of up to 2400!)
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20191212111437.224294-1-toke@redhat.com
Fixes:
|
||
|
Jens Axboe
|
9e3aa61ae3 |
io_uring: ensure we return -EINVAL on unknown opcode
If we submit an unknown opcode and have fd == -1, io_op_needs_file() will return true as we default to needing a file. Then when we go and assign the file, we find the 'fd' invalid and return -EBADF. We really should be returning -EINVAL for that case, as we normally do for unsupported opcodes. Change io_op_needs_file() to have the following return values: 0 - does not need a file 1 - does need a file < 0 - error value and use this to pass back the right value for this invalid case. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
4e88d6e779 |
io_uring: allow unbreakable links
Some commands will invariably end in a failure in the sense that the completion result will be less than zero. One such example is timeouts that don't have a completion count set, they will always complete with -ETIME unless cancelled. For linked commands, we sever links and fail the rest of the chain if the result is less than zero. Since we have commands where we know that will happen, add IOSQE_IO_HARDLINK as a stronger link that doesn't sever regardless of the completion result. Note that the link will still sever if we fail submitting the parent request, hard links are only resilient in the presence of completion results for requests that did submit correctly. Cc: stable@vger.kernel.org # v5.4 Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Reported-by: 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
David S. Miller
|
7da538c1e1 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Wait for rcu grace period after releasing netns in ctnetlink,
from Florian Westphal.
2) Incorrect command type in flowtable offload ndo invocation,
from wenxu.
3) Incorrect callback type in flowtable offload flow tuple
updates, also from wenxu.
4) Fix compile warning on flowtable offload infrastructure due to
possible reference to uninitialized variable, from Nathan Chancellor.
5) Do not inline nf_ct_resolve_clash(), this is called from slow
path / stress situations. From Florian Westphal.
6) Missing IPv6 flow selector description in flowtable offload.
7) Missing check for NETDEV_UNREGISTER in nf_tables offload
infrastructure, from wenxu.
8) Update NAT selftest to use randomized netns names, from
Florian Westphal.
9) Restore nfqueue bridge support, from Marco Oliverio.
10) Compilation warning in SCTP_CHUNKMAP_*() on xt_sctp header.
From Phil Sutter.
11) Fix bogus lookup/get match for non-anonymous rbtree sets.
12) Missing netlink validation for NFT_SET_ELEM_INTERVAL_END
elements.
13) Missing netlink validation for NFT_DATA_VALUE after
nft_data_init().
14) If rule specifies no actions, offload infrastructure returns
EOPNOTSUPP.
15) Module refcount leak in object updates.
16) Missing sanitization for ARP traffic from br_netfilter, from
Eric Dumazet.
17) Compilation breakage on big-endian due to incorrect memcpy()
size in the flowtable offload infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Phil Sutter
|
164166558a |
netfilter: uapi: Avoid undefined left-shift in xt_sctp.h
With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is undefined for the signed 32-bit value 1. Avoid this by declaring 1 as unsigned. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Linus Torvalds
|
737214515d |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov: - fixups for Synaptics RMI4 driver - a quirk for Goodinx touchscreen on Teclast tablet - a new keycode definition for activating privacy screen feature found on a few "enterprise" laptops - updates to snvs_pwrkey driver - polling uinput device for writing (which is always allowed) now works * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash Input: goodix - add upside-down quirk for Teclast X89 tablet Input: add privacy screen toggle keycode Input: uinput - fix returning EPOLLOUT from uinput_poll Input: snvs_pwrkey - remove gratuitous NULL initializers Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q |
||
|
Linus Torvalds
|
9feb1af97e |
for-linus-20191205
-----BEGIN PGP SIGNATURE-----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=7ZFw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191205' of git://git.kernel.dk/linux-block
Pull more block and io_uring updates from Jens Axboe:
"I wasn't expecting this to be so big, and if I was, I would have used
separate branches for this. Going forward I'll be doing separate
branches for the current tree, just like for the next kernel version
tree. In any case, this contains:
- Series from Christoph that fixes an inherent race condition with
zoned devices and revalidation.
- null_blk zone size fix (Damien)
- Fix for a regression in this merge window that caused busy spins by
sending empty disk uevents (Eric)
- Fix for a regression in this merge window for bfq stats (Hou)
- Fix for io_uring creds allocation failure handling (me)
- io_uring -ERESTARTSYS send/recvmsg fix (me)
- Series that fixes the need for applications to retain state across
async request punts for io_uring. This one is a bit larger than I
would have hoped, but I think it's important we get this fixed for
5.5.
- connect(2) improvement for io_uring, handling EINPROGRESS instead
of having applications needing to poll for it (me)
- Have io_uring use a hash for poll requests instead of an rbtree.
This turned out to work much better in practice, so I think we
should make the switch now. For some workloads, even with a fair
amount of cancellations, the insertion sort is just too expensive.
(me)
- Various little io_uring fixes (me, Jackie, Pavel, LimingWu)
- Fix for brd unaligned IO, and a warning for the future (Ming)
- Fix for a bio integrity data leak (Justin)
- bvec_iter_advance() improvement (Pavel)
- Xen blkback page unmap fix (SeongJae)
The major items in here are all well tested, and on the liburing side
we continue to add regression and feature test cases. We're up to 50
topic cases now, each with anywhere from 1 to more than 10 cases in
each"
* tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits)
block: fix memleak of bio integrity data
io_uring: fix a typo in a comment
bfq-iosched: Ensure bio->bi_blkg is valid before using it
io_uring: hook all linked requests via link_list
io_uring: fix error handling in io_queue_link_head
io_uring: use hash table for poll command lookups
io-wq: clear node->next on list deletion
io_uring: ensure deferred timeouts copy necessary data
io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT
null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED
brd: warn on un-aligned buffer
brd: remove max_hw_sectors queue limit
xen/blkback: Avoid unmapping unmapped grant pages
io_uring: handle connect -EINPROGRESS like -EAGAIN
block: set the zone size in blk_revalidate_disk_zones atomically
block: don't handle bio based drivers in blk_revalidate_disk_zones
block: allocate the zone bitmaps lazily
block: replace seq_zones_bitmap with conv_zones_bitmap
block: simplify blkdev_nr_zones
block: remove the empty line at the end of blk-zoned.c
...
|
||
|
Linus Torvalds
|
5ecc9d15f7 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Most of the rest of MM and various other things. Some Kconfig rework still awaits merges of dependent trees from linux-next. Subsystems affected by this patch series: mm/hotfixes, mm/memcg, mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel, bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov, ubsan, ipc, bitmap, mm/pagemap" * akpm: (86 commits) mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h um: add support for folded p4d page tables um: remove unused pxx_offset_proc() and addr_pte() functions sparc32: use pgtable-nopud instead of 4level-fixup parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup parisc: use pgtable-nopXd instead of 4level-fixup nds32: use pgtable-nopmd instead of 4level-fixup microblaze: use pgtable-nopmd instead of 4level-fixup m68k: mm: use pgtable-nopXd instead of 4level-fixup m68k: nommu: use pgtable-nopud instead of 4level-fixup c6x: use pgtable-nopud instead of 4level-fixup arm: nommu: use pgtable-nopud instead of 4level-fixup alpha: use pgtable-nopud instead of 4level-fixup gpio: pca953x: tighten up indentation gpio: pca953x: convert to use bitmap API gpio: pca953x: use input from regs structure in pca953x_irq_pending() gpio: pca953x: remove redundant variable and check in IRQ handler lib/bitmap: introduce bitmap_replace() helper lib/test_bitmap: fix comment about this file lib/test_bitmap: move exp1 and exp2 upper for others to use ... |
||
|
Andrey Konovalov
|
eec028c938 |
kcov: remote coverage support
Patch series " kcov: collect coverage from usb and vhost", v3. This patchset extends kcov to allow collecting coverage from backgound kernel threads. This extension requires custom annotations for each of the places where coverage collection is desired. This patchset implements this for hub events in the USB subsystem and for vhost workers. See the first patch description for details about the kcov extension. The other two patches apply this kcov extension to USB and vhost. Examples of other subsystems that might potentially benefit from this when custom annotations are added (the list is based on process_one_work() callers for bugs recently reported by syzbot): 1. fs: writeback wb_workfn() worker, 2. net: addrconf_dad_work()/addrconf_verify_work() workers, 3. net: neigh_periodic_work() worker, 4. net/p9: p9_write_work()/p9_read_work() workers, 5. block: blk_mq_run_work_fn() worker. These patches have been used to enable coverage-guided USB fuzzing with syzkaller for the last few years, see the details here: https://github.com/google/syzkaller/blob/master/docs/linux/external_fuzzing_usb.md This patchset has been pushed to the public Linux kernel Gerrit instance: https://linux-review.googlesource.com/c/linux/kernel/git/torvalds/linux/+/1524 This patch (of 3): Add background thread coverage collection ability to kcov. With KCOV_ENABLE coverage is collected only for syscalls that are issued from the current process. With KCOV_REMOTE_ENABLE it's possible to collect coverage for arbitrary parts of the kernel code, provided that those parts are annotated with kcov_remote_start()/kcov_remote_stop(). This allows to collect coverage from two types of kernel background threads: the global ones, that are spawned during kernel boot in a limited number of instances (e.g. one USB hub_event() worker thread is spawned per USB HCD); and the local ones, that are spawned when a user interacts with some kernel interface (e.g. vhost workers). To enable collecting coverage from a global background thread, a unique global handle must be assigned and passed to the corresponding kcov_remote_start() call. Then a userspace process can pass a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the kcov_remote_arg struct. This will attach the used kcov device to the code sections, that are referenced by those handles. Since there might be many local background threads spawned from different userspace processes, we can't use a single global handle per annotation. Instead, the userspace process passes a non-zero handle through the common_handle field of the kcov_remote_arg struct. This common handle gets saved to the kcov_handle field in the current task_struct and needs to be passed to the newly spawned threads via custom annotations. Those threads should in turn be annotated with kcov_remote_start()/kcov_remote_stop(). Internally kcov stores handles as u64 integers. The top byte of a handle is used to denote the id of a subsystem that this handle belongs to, and the lower 4 bytes are used to denote the id of a thread instance within that subsystem. A reserved value 0 is used as a subsystem id for common handles as they don't belong to a particular subsystem. The bytes 4-7 are currently reserved and must be zero. In the future the number of bytes used for the subsystem or handle ids might be increased. When a particular userspace process collects coverage by via a common handle, kcov will collect coverage for each code section that is annotated to use the common handle obtained as kcov_handle from the current task_struct. However non common handles allow to collect coverage selectively from different subsystems. Link: http://lkml.kernel.org/r/e90e315426a384207edbec1d6aa89e43008e4caf.1572366574.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Windsor <dwindsor@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Masahiro Yamada
|
1a18374fc3 |
linux/scc.h: make uapi linux/scc.h self-contained
Userspace cannot compile <linux/scc.h>
CC usr/include/linux/scc.h.s
In file included from <command-line>:32:0:
usr/include/linux/scc.h:20:20: error: `SIOCDEVPRIVATE' undeclared here (not in a function)
SIOCSCCRESERVED = SIOCDEVPRIVATE,
^~~~~~~~~~~~~~
Include <linux/sockios.h> to make it self-contained, and add it to the
compile-test coverage.
Link: http://lkml.kernel.org/r/20191108055809.26969-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mathew King
|
25b2f1b77a |
Input: add privacy screen toggle keycode
Add keycode for toggling electronic privacy screen to the keycodes definition. Some new laptops have a privacy screen which can be toggled with a key on the keyboard. Signed-off-by: Mathew King <mathewk@chromium.org> Link: https://lore.kernel.org/r/20191017163208.235518-1-mathewk@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Linus Torvalds
|
aedc0650f9 |
* PPC secure guest support
* small x86 cleanup * fix for an x86-specific out-of-bounds write on a ioctl (not guest triggerable, data not attacker-controlled) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJd551cAAoJEL/70l94x66D+JkH/R3eEOyvckPmYmzd0lnV8mQ/ 7e0n2G/aD+iLZkcCbUnMaImdmSJmoEEJCPjgPk/5nJ3zUi5b/ABWyidEM5uf19Hl rzKBg0DR7BiQptPnZv2JMwEVKu3JOTchMykqu9xXChQlICocZ0xjdOA6nQ19p0Lv FulDw5MUaWrXevIzCBskQ38zJejRQA6CpD1lQkHn7LKS9p3p+BsAOd/Ouy87RfWG b3ktECNbXyO6KStrrhgm+z8pviWY+kqYklyBlDOOwxWif0x8WvNDpQLoVo+ZuhLU Me8YJ1BN75vFlxzh6ZK5exBUnm9E3fGVKIaaF+dpuds2x+j4HnYl+lZCm89MdqY= =Q4v7 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: - PPC secure guest support - small x86 cleanup - fix for an x86-specific out-of-bounds write on a ioctl (not guest triggerable, data not attacker-controlled) * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: Stop wasting a page for guest_msrs KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332) Documentation: kvm: Fix mention to number of ioctls classes powerpc: Ultravisor: Add PPC_UV config option KVM: PPC: Book3S HV: Support reset of secure guest KVM: PPC: Book3S HV: Handle memory plug/unplug to secure VM KVM: PPC: Book3S HV: Radix changes for secure guest KVM: PPC: Book3S HV: Shared pages support for secure guests KVM: PPC: Book3S HV: Support for running secure guests mm: ksm: Export ksm_madvise() KVM x86: Move kvm cpuid support out of svm |
||
|
Linus Torvalds
|
537bd0a159 |
TTY/Serial patches for 5.5-rc1
Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit
later in the merge window than normal as I wanted to make sure some
last-minute patches applied to it were all sane. They seem to be :)
There's a lot of little stuff in here, for the tty core, and for lots of
serial drivers:
- reverts of uartlite serial driver patches that were wrong
- msm-serial driver fixes
- serial core updates and fixes
- tty core fixes
- serial driver dma mapping api changes
- lots of other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXebFIQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylnmACgjfMcfQWa7uC9Q6m2DaQaRMaW6QoAnjg+TgBB
eW9EhvyXL2VbrsuUl+iH
=Am9O
-----END PGP SIGNATURE-----
Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the "big" tty and serial driver patches for 5.5-rc1.
It's a bit later in the merge window than normal as I wanted to make
sure some last-minute patches applied to it were all sane. They seem
to be :)
There's a lot of little stuff in here, for the tty core, and for lots
of serial drivers:
- reverts of uartlite serial driver patches that were wrong
- msm-serial driver fixes
- serial core updates and fixes
- tty core fixes
- serial driver dma mapping api changes
- lots of other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
vcs: prevent write access to vcsu devices
tty: vt: keyboard: reject invalid keycodes
tty: don't crash in tty_init_dev when missing tty_port
serial: stm32: fix clearing interrupt error flags
tty: Fix Kconfig indentation, continued
serial: serial_core: Perform NULL checks for break_ctl ops
tty: remove unused argument from tty_open_by_driver()
tty: Fix Kconfig indentation
{tty: serial, nand: onenand}: samsung: rename to fix build warning
serial: ifx6x60: add missed pm_runtime_disable
serial: pl011: Fix DMA ->flush_buffer()
Revert "serial-uartlite: Move the uart register"
Revert "serial-uartlite: Add get serial id if not provided"
Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
Revert "serial-uartlite: Add runtime support"
Revert "serial-uartlite: Change logic how console_port is setup"
Revert "serial-uartlite: Use allocated structure instead of static ones"
tty: serial: msm_serial: Use dma_request_chan() directly for channel request
tty: serial: tegra: Use dma_request_chan() directly for channel request
...
|
||
|
Linus Torvalds
|
c3bed3b20e |
pci-v5.5-changes
-----BEGIN PGP SIGNATURE-----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=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
|
||
|
Jens Axboe
|
da8c969069 |
io_uring: mark us with IORING_FEAT_SUBMIT_STABLE
If this flag is set, applications can be certain that any data for async offload has been consumed when the kernel has consumed the SQE. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
ef2cc88e2a |
SCSI misc on 20191130
This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The two major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXeKvHCYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQJMAQDAjlAi SNfbyndMqyf+rZGWufDI+43Up1VvW9GeWJHeDwEAxfO5XZsCks2uT8UxXhpEp9L7 HkiUww3zbcgl0FWFkUM= =cdVU -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits) scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: target: core: Fix a pr_debug() argument scsi: iscsi: Don't send data to unbound connection scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: bnx2i: fix potential use after free Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: scsi_debug: num_tgts must be >= 0 scsi: lpfc: use hdwq assigned cpu for allocation scsi: arcmsr: fix indentation issues scsi: qla4xxx: fix double free bug scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Controller fatal error through sysfs scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out ... |
||
|
Linus Torvalds
|
1daa56bcfd |
IOMMU Updates for Linux v5.5
Including: - Conversion of the AMD IOMMU driver to use the dma-iommu code for imlementing the DMA-API. This gets rid of quite some code in the driver itself, but also has some potential for regressions (non are known at the moment). - Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC. This also includes some firmware interface changes, but those are acked by the respective maintainers. - Preparatory work to support two distinct page-tables per domain in the ARM-SMMU driver - Power management improvements for the ARM SMMUv2 - Custom PASID allocator support - Multiple PCI DMA alias support for the AMD IOMMU driver - Adaption of the Mediatek driver to the changed IO/TLB flush interface of the IOMMU core code. - Preparatory patches for the Renesas IOMMU driver to support future hardware. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl3hCC4ACgkQK/BELZcB GuN9QQ/+LFh2TdhtiemIakA/19nv1FTP719uje7vjX4gGBGD++NEzW7mBcAXSEnD rBta1GsD6N8h0fdT53Nw8cezQ1ldBomKG3j+mzcju7TcuRwebhCEQaxh2iWy+I6g cp6HxTu3G0E6Zy7wd+MWyJzvXa7MXV2p8iCDs7Dp8yEow+c55b4LAIoeRWx3rjsT rat29MuJ8TGLP6vOYHcpI+REGfda4rsog75980RIoOEuqRjMG6JPj9clPeakSNtQ Rl1EtgrDskbRCgDSujbzDMHAYRUKvdCuTuTM1De/GQO+GWYsOtzqBHkct67sGn9I H518Be9m4xfYyyktVM6K9bSpxzCOtor+u6LFOejufJN/7vL2qtePZX7EHL/ks8zh Mn80H/1ch1UcFcF9p7V7QCMUSyaiX/VWhgwWIdPf3CGrKVaLnQ8mkB82Zf0VNuQT OzcfJcVF+skhDkXdFL5xUkQtqqTHhpaK2CzvvTDAsR1KXMCc6mH/MT/9m+mOFQFK P+klgGdU5rVniru10k4pamT5LlLubRV0NBpaAiGr2R3dfyYyiS/D9FBSLanqO+JM AgSnmOSbl7y927DxufkVPH8M7TxSdtQVo7VoQFjSWE8B9bh4qU6MVV30enLvY0Fj g4DP+8srOvY0vNsWNiBe2JpldABGEAbumFt78g1WV2tFi1d/NUI= =ntaE -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Conversion of the AMD IOMMU driver to use the dma-iommu code for imlementing the DMA-API. This gets rid of quite some code in the driver itself, but also has some potential for regressions (non are known at the moment). - Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC. This also includes some firmware interface changes, but those are acked by the respective maintainers. - Preparatory work to support two distinct page-tables per domain in the ARM-SMMU driver - Power management improvements for the ARM SMMUv2 - Custom PASID allocator support - Multiple PCI DMA alias support for the AMD IOMMU driver - Adaption of the Mediatek driver to the changed IO/TLB flush interface of the IOMMU core code. - Preparatory patches for the Renesas IOMMU driver to support future hardware. * tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits) iommu/rockchip: Don't provoke WARN for harmless IRQs iommu/vt-d: Turn off translations at shutdown iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved iommu/arm-smmu: Remove duplicate error message iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing iommu/ipmmu-vmsa: Add utlb_offset_base iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers iommu/ipmmu-vmsa: tidyup register definitions iommu/ipmmu-vmsa: Remove all unused register definitions iommu/mediatek: Reduce the tlb flush timeout value iommu/mediatek: Get rid of the pgtlock iommu/mediatek: Move the tlb_sync into tlb_flush iommu/mediatek: Delete the leaf in the tlb_flush iommu/mediatek: Use gather to achieve the tlb range flush iommu/mediatek: Add a new tlb_lock for tlb_flush iommu/mediatek: Correct the flush_iotlb_all callback iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc iommu/io-pgtable-arm: Rationalise MAIR handling ... |
||
|
Linus Torvalds
|
d004701d1c |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - Support for Logitech G15 (Hans de Goede) - HID parser improvements, improving support for some devices; e.g. Windows Precision Touchpad, products from Primax, etc. (Blaž Hrastnik, Candle Sun) - robustification of tablet mode support in google-whiskers driver (Dmitry Torokhov) - assorted small fixes, device-specific quirks and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits) HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device HID: quirks: remove hid-led devices from hid_have_special_driver HID: Improve Windows Precision Touchpad detection. HID: i2c-hid: Reset ALPS touchpads on resume HID: i2c-hid: fix no irq after reset on raydium 3118 HID: logitech-hidpp: Silence intermittent get_battery_capacity errors HID: i2c-hid: remove orphaned member sleep_delay HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse HID: core: check whether Usage Page item is after Usage ID items HID: intel-ish-hid: Spelling s/diconnect/disconnect/ HID: google: Detect base folded usage instead of hard-coding whiskers HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs HID: lg-g15: Add support for controlling the G510's RGB backlight HID: lg-g15: Add support for the G510 keyboards' gaming keys HID: lg-g15: Add support for the M1-M3 and MR LEDs HID: lg-g15: Add keyboard and LCD backlight control HID: Add driver for Logitech gaming keyboards (G15, G15 v2) Input: Add event-codes for macro keys found on various keyboards HID: hidraw: replace printk() with corresponding pr_xx() variant ... |
||
|
Linus Torvalds
|
99a0d9f5e8 |
This is the bulk of GPIO changes for the v5.5 kernel cycle
Core changes:
- Expose pull up/down flags for the GPIO character device to
userspace. After clear input from the RaspberryPi and Beagle
communities, it has been established that prototyping,
industrial automation and make communities strongly need
this feature, and as we want people to use the character
device, we have implemented the simple pull up/down
interface for GPIO lines. This means we can specify that
a (chip-specific) pull up/down resistor can be enabled,
but does not offer fine-grained control such as cases
where the resistance of the same pull resistor can be
controlled (yet).
- Introduce devm_fwnode_gpiod_get_index() and start to phase out
the old symbol devm_fwnode_get_index_gpiod_from_child().
- A bit of documentation clean-up work.
- Introduce a define for GPIO line directions and deploy it
in all GPIO drivers in the drivers/gpio directory.
- Add a special callback to populate pin ranges when
cooperating with the pin control subsystem and registering
ranges as part of adding a gpiolib driver and a
gpio_irq_chip driver at the same time. This is also
deployed in the Intel Merrifield driver.
New drivers:
- RDA Micro GPIO controller.
- XGS-iproc GPIO driver.
Driver improvements:
- Wake event and debounce support on the Tegra 186 driver.
- Finalize the Aspeed SGPIO driver.
- MPC8xxx uses a normal IRQ handler rather than a chained
handler.
-----BEGIN PGP SIGNATURE-----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=o13I
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.5 kernel cycle
Core changes:
- Expose pull up/down flags for the GPIO character device to
userspace.
After clear input from the RaspberryPi and Beagle communities, it
has been established that prototyping, industrial automation and
make communities strongly need this feature, and as we want people
to use the character device, we have implemented the simple pull
up/down interface for GPIO lines.
This means we can specify that a (chip-specific) pull up/down
resistor can be enabled, but does not offer fine-grained control
such as cases where the resistance of the same pull resistor can be
controlled (yet).
- Introduce devm_fwnode_gpiod_get_index() and start to phase out the
old symbol devm_fwnode_get_index_gpiod_from_child().
- A bit of documentation clean-up work.
- Introduce a define for GPIO line directions and deploy it in all
GPIO drivers in the drivers/gpio directory.
- Add a special callback to populate pin ranges when cooperating with
the pin control subsystem and registering ranges as part of adding
a gpiolib driver and a gpio_irq_chip driver at the same time. This
is also deployed in the Intel Merrifield driver.
New drivers:
- RDA Micro GPIO controller.
- XGS-iproc GPIO driver.
Driver improvements:
- Wake event and debounce support on the Tegra 186 driver.
- Finalize the Aspeed SGPIO driver.
- MPC8xxx uses a normal IRQ handler rather than a chained handler"
* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
gpio: Add TODO item for regmap helper
Documentation: gpio: driver.rst: Fix warnings
gpio: of: Fix bogus reference to gpiod_get_count()
gpiolib: Grammar s/manager/managed/
gpio: lynxpoint: Setup correct IRQ handlers
MAINTAINERS: Replace my email by one @kernel.org
gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
gpio/mpc8xxx: fix qoriq GPIO reading
gpio: mpc8xxx: Don't overwrite default irq_set_type callback
gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
gpiolib: fix coding style in gpiod_hog()
drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
gpio: merrifield: Pass irqchip when adding gpiochip
gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
gpiolib: Introduce ->add_pin_ranges() callback
gpio: mmio: remove untrue leftover comment
gpio: em: Use platform_get_irq() to obtain interrupts
gpio: tegra186: Add debounce support
gpio: tegra186: Program interrupt route mapping
gpio: tegra186: Derive register offsets from bank/port
...
|
||
|
Linus Torvalds
|
ceb3074745 |
y2038: syscall implementation cleanups
This is a series of cleanups for the y2038 work, mostly intended for namespace cleaning: the kernel defines the traditional time_t, timeval and timespec types that often lead to y2038-unsafe code. Even though the unsafe usage is mostly gone from the kernel, having the types and associated functions around means that we can still grow new users, and that we may be missing conversions to safe types that actually matter. There are still a number of driver specific patches needed to get the last users of these types removed, those have been submitted to the respective maintainers. Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJd3D+wAAoJEJpsee/mABjZfdcQAJvl6e+4ddKoDMIVJqVCE25N meFRgA7S8jy6BefEVeUgI8TxK+amGO36szMBUEnZxSSxq9u+gd13m5bEK6Xq/ov7 4KTAiA3Irm/W5FBTktu1zc5ROIra1Xj7jLdubf8wEC3viSXIXB3+68Y28iBN7D2O k9kSpwINC5lWeC8guZy2I+2yc4ywUEXao9nVh8C/J+FQtU02TcdLtZop9OhpAa8u U19VVH3WHkQI7ZfLvBTUiYK6tlYTiYCnpr8l6sm850CnVv1fzBW+DzmVhPJ6FdFd 4m5staC0sQ6gVqtjVMBOtT5CdzREse6hpwbKo2GRWFroO5W9tljMOJJXHvv/f6kz DxrpUmj37JuRbqAbr8KDmQqPo6M2CRkxFxjol1yh5ER63u1xMwLm/PQITZIMDvPO jrFc2C2SdM2E9bKP/RMCVoKSoRwxCJ5IwJ2AF237rrU0sx/zB2xsrOGssx5CWEgc 3bbk6tDQujJJubnCfgRy1tTxpLZOHEEKw8YhFLLbR2LCtA9pA/0rfLLad16cjA5e 5jIHxfsFc23zgpzrJeB7kAF/9xgu1tlA5BotOs3VBE89LtWOA9nK5dbPXng6qlUe er3xLCfS38ovhUw6DusQpaYLuaYuLM7DKO4iav9kuTMcY9GkbPk7vDD3KPGh2goy hY5cSM8+kT1q/THLnUBH =Bdbv -----END PGP SIGNATURE----- Merge tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 cleanups from Arnd Bergmann: "y2038 syscall implementation cleanups This is a series of cleanups for the y2038 work, mostly intended for namespace cleaning: the kernel defines the traditional time_t, timeval and timespec types that often lead to y2038-unsafe code. Even though the unsafe usage is mostly gone from the kernel, having the types and associated functions around means that we can still grow new users, and that we may be missing conversions to safe types that actually matter. There are still a number of driver specific patches needed to get the last users of these types removed, those have been submitted to the respective maintainers" Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/ * tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits) y2038: alarm: fix half-second cut-off y2038: ipc: fix x32 ABI breakage y2038: fix typo in powerpc vdso "LOPART" y2038: allow disabling time32 system calls y2038: itimer: change implementation to timespec64 y2038: move itimer reset into itimer.c y2038: use compat_{get,set}_itimer on alpha y2038: itimer: compat handling to itimer.c y2038: time: avoid timespec usage in settimeofday() y2038: timerfd: Use timespec64 internally y2038: elfcore: Use __kernel_old_timeval for process times y2038: make ns_to_compat_timeval use __kernel_old_timeval y2038: socket: use __kernel_old_timespec instead of timespec y2038: socket: remove timespec reference in timestamping y2038: syscalls: change remaining timeval to __kernel_old_timeval y2038: rusage: use __kernel_old_timeval y2038: uapi: change __kernel_time_t to __kernel_old_time_t y2038: stat: avoid 'time_t' in 'struct stat' y2038: ipc: remove __kernel_time_t reference from headers y2038: vdso: powerpc: avoid timespec references ... |
||
|
Linus Torvalds
|
0da522107e |
compat_ioctl: remove most of fs/compat_ioctl.c
As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJdsHCdAAoJEJpsee/mABjZtYkP/1JGl3jFv3Iq/5BCdPkaePP1 RtMJRNfURgK3GeuHUui330PvVjI/pLWXU/VXMK2MPTASpJLzYz3uCaZrpVWEMpDZ +ImzGmgJkITlW1uWU3zOcQhOxTyb1hCZ0Ci+2xn9QAmyOL7prXoXCXDWv3h6iyiF lwG+nW+HNtyx41YG+9bRfKNoG0ZJ+nkJ70BV6u0acQHXWn7Xuupa9YUmBL87hxAL 6dlJfLTJg6q8QSv/Q6LxslfWk2Ti8OOJZOwtFM5R8Bgl0iUcvshiRCKfv/3t9jXD dJNvF1uq8z+gracWK49Qsfq5dnZ2ZxHFUo9u0NjbCrxNvWH/sdvhbaUBuJI75seH VIznCkdxFhrqitJJ8KmxANxG08u+9zSKjSlxG2SmlA4qFx/AoStoHwQXcogJscNb YIXYKmWBvwPzYu09QFAXdHFPmZvp/3HhMWU6o92lvDhsDwzkSGt3XKhCJea4DCaT m+oCcoACqSWhMwdbJOEFofSub4bY43s5iaYuKes+c8O261/Dwg6v/pgIVez9mxXm TBnvCsotq5m8wbwzv99eFqGeJH8zpDHrXxEtRR5KQqMqjLq/OQVaEzmpHZTEuK7n e/V/PAKo2/V63g4k6GApQXDxnjwT+m0aWToWoeEzPYXS6KmtWC91r4bWtslu3rdl bN65armTm7bFFR32Avnu =lgCl -----END PGP SIGNATURE----- Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ... |
||
|
Linus Torvalds
|
b94ae8ad9f |
seccomp updates for v5.5
- implement SECCOMP_USER_NOTIF_FLAG_CONTINUE (Christian Brauner) - fixes to selftests (Christian Brauner) - remove secure_computing() argument (Christian Brauner) -----BEGIN PGP SIGNATURE----- Comment: Kees Cook <kees@outflux.net> iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl3dT/kWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJg7eD/9PFh0xAgk7swWIOnkv/Ckj6pqR lcnVaugsap2sp99P+QxVPoqKoBsHF/OZ96OqJcokljdWO77ElBMG4Xxgjho/mPPU Yzhsd9/Q0j4zYIe/Gy+4LxZ+wSudBxv7ls4l86fst1GWg880VkLk32/1N0BUjFAp uyBBaEuDoXcnkru8ojKH1xgp0Cd1KjyO1KEAQdkSt2GROo3nhROh9955Hrrxuanr 0sjWLYe8E8P3hPugRI/3WRZu4VqdIn47pm+/UMPwGpC80kI+mSL1jtidszqC022w u0H5yoedEhZCan7uHWtEY1TXfwgktUKMZOzMP8LSoZ9cNPAFyKXsFqN7Jzf/1Edr 9Zsc+9gc3lfBr6YYBSHUC4XYGzZ2fy0itK/yRTvZdUGO/XETrE61fR/wyVjQttRS OR1tAtmd9/3iZqe1jh1l3Rw4bJh1w/hS768sWpp8qAMunCGF5gQvFdqGFAxjIS5c Ddd0gjxK/NV72+iUzCSL0qUXcYjNYPT4cUapywBuQ4H1i4hl5EM3nGyCbLFbpqkp L2fzeAdRGSZIzZ35emTWhvSLZ36Ty64zEViNbAOP9o/+j6/SR5TjL1aNDkz69Eca GM1XiDeg4AoamtPR38+DzS+EnzBWfOD6ujsKNFgjAJbVIaa414Vql9utrq7fSvf2 OIJjAD8PZKN93t1qaw== =igQG -----END PGP SIGNATURE----- Merge tag 'seccomp-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "Mostly this is implementing the new flag SECCOMP_USER_NOTIF_FLAG_CONTINUE, but there are cleanups as well. - implement SECCOMP_USER_NOTIF_FLAG_CONTINUE (Christian Brauner) - fixes to selftests (Christian Brauner) - remove secure_computing() argument (Christian Brauner)" * tag 'seccomp-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: rework define for SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: fix SECCOMP_USER_NOTIF_FLAG_CONTINUE test seccomp: simplify secure_computing() seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: avoid overflow in implicit constant conversion |
||
|
Linus Torvalds
|
3b805ca177 |
audit/stable-5.5 PR 20191126
-----BEGIN PGP SIGNATURE-----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=fc7R
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Audit is back for v5.5, albeit with only two patches:
- Allow for the auditing of suspicious O_CREAT usage via the new
AUDIT_ANOM_CREAT record.
- Remove a redundant if-conditional check found during code analysis.
It's a minor change, but when the pull request is only two patches
long, you need filler in the pull request email"
[ Heh on the pull request filler. I wish more people tried to write
better pull request messages, even if maybe it's not worth it for the
trivial cases ;^) - Linus ]
* tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove redundant condition check in kauditd_thread()
audit: Report suspicious O_CREAT usage
|
||
|
Linus Torvalds
|
7794b1d418 |
powerpc updates for 5.5
Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines. The
firmware support is still in development, so the code here won't actually
activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict it to
read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop
into xmon and modify kernel data, such as the lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work
with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management) driver to
make it behave more like other balloon drivers and enable some cleanups of
generic mm code.
- A series of fixes to our hardware breakpoint support to properly handle
unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to:
Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser,
Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M.
Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand,
Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg
Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason
Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M.
Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi
Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel
Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl3hBycTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgApBEACk91MEQDYJ9MF9I6uN+85qb5p4pMsp
rGzqnpt+XFidbDAc3eP63pYfIDSo3jtkQ2YL7shAnDOTvkO0md+Vqkl9Aq/G6FIf
lDBlwbgkXMSxS/O2Lpvfn4NZAoK6dKmiV55LSgfliM62X3e2Saeg6TR55wBTgJ6/
SlYPDwZfcVHOAiFS3UmfB+hkiIZk+AI5Zr5VAZvT2ZmeH36yAWkq4JgJI1uAk6m1
/7iCnlfUjx/nl/BhnA3kjjmAgGCJ5s/WuVgwFMz47XpMBWGBhLWpMh/NqDTFb8ca
kpiVQoVPQe2xyO3pL/kOwBy6sii26ftfHDhLKMy1hJdEhVQzS5LerPIMeh1qsU8Q
hV/Cj+jfsrS/vBDOehj3jwx93t+861PmTOqgLnpYQ6Ltrt+2B/74+fufGMHE1kI3
Ffo7xvNw4sw6bSziDxDFqUx2P1dFN5D5EJsJsYM98ekkVAAkzNqCDRvfD2QI8Pif
VXWPYXqtNJTrVPJA0D7Yfo9FDNwhANd0f1zi7r/U5mVXBFUyKOlGqTQSkXgMrVeK
3I7wHPOVGgdA5UUkfcd3pcuqsY081U9E//o5PUfj8ybO5JCwly8NoatbG+xHmKia
a72uJT8MjCo9mGCHKDrwi9l/kqms6ZSv8RP+yMhGuB52YoiGc6PpVyab5jXIUd1N
yTtBlC0YGW1JYw==
=JHzg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines.
The firmware support is still in development, so the code here
won't actually activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict
it to read-only mode when the kernel is lockdown'ed, otherwise it's
trivial to drop into xmon and modify kernel data, such as the
lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache()
(VDSO) to work with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management)
driver to make it behave more like other balloon drivers and enable
some cleanups of generic mm code.
- A series of fixes to our hardware breakpoint support to properly
handle unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"
* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
powerpc/fixmap: fix crash with HIGHMEM
x86/efi: remove unused variables
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
powerpc: Avoid clang warnings around setjmp and longjmp
powerpc: Don't add -mabi= flags when building with Clang
powerpc: Fix Kconfig indentation
powerpc/fixmap: don't clear fixmap area in paging_init()
selftests/powerpc: spectre_v2 test must be built 64-bit
powerpc/powernv: Disable native PCIe port management
powerpc/kexec: Move kexec files into a dedicated subdir.
powerpc/32: Split kexec low level code out of misc_32.S
powerpc/sysdev: drop simple gpio
powerpc/83xx: map IMMR with a BAT.
powerpc/32s: automatically allocate BAT in setbat()
powerpc/ioremap: warn on early use of ioremap()
powerpc: Add support for GENERIC_EARLY_IOREMAP
powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
powerpc/8xx: use the fixmapped IMMR in cpm_reset()
powerpc/8xx: add __init to cpm1 init functions
...
|
||
|
Jiri Kosina
|
a820e45039 |
Merge branch 'for-5.5/logitech' into for-linus
- Support for Logitech G15 (Hans de Goede) - silencing of non-informative error flow in dmesg from logitechi-hiddpp (Hans de Goede) |
||
|
Linus Torvalds
|
05bd375b6b |
for-5.5/io_uring-post-20191128
-----BEGIN PGP SIGNATURE-----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=HqiO
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"As mentioned in the first pull request, there was a later batch as
well. This contains fixes to the stuff that already went in, cleanups,
and a few later additions. In particular, this contains:
- Cleanups/fixes/unification of the submission and completion path
(Pavel,me)
- Linked timeouts improvements (Pavel,me)
- Error path fixes (me)
- Fix lookup window where cancellations wouldn't work (me)
- Improve DRAIN support (Pavel)
- Fix backlog flushing -EBUSY on submit (me)
- Add support for connect(2) (me)
- Fix for non-iter based fixed IO (Pavel)
- creds inheritance for async workers (me)
- Disable cmsg/ancillary data for sendmsg/recvmsg (me)
- Shrink io_kiocb to 3 cachelines (me)
- NUMA fix for io-wq (Jann)"
* tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block: (42 commits)
io_uring: make poll->wait dynamically allocated
io-wq: shrink io_wq_work a bit
io-wq: fix handling of NUMA node IDs
io_uring: use kzalloc instead of kcalloc for single-element allocations
io_uring: cleanup io_import_fixed()
io_uring: inline struct sqe_submit
io_uring: store timeout's sqe->off in proper place
net: disallow ancillary data for __sys_{send,recv}msg_file()
net: separate out the msghdr copy from ___sys_{send,recv}msg()
io_uring: remove superfluous check for sqe->off in io_accept()
io_uring: async workers should inherit the user creds
io-wq: have io_wq_create() take a 'data' argument
io_uring: fix dead-hung for non-iter fixed rw
io_uring: add support for IORING_OP_CONNECT
net: add __sys_connect_file() helper
io_uring: only return -EBUSY for submit on non-flushed backlog
io_uring: only !null ptr to io_issue_sqe()
io_uring: simplify io_req_link_next()
io_uring: pass only !null to io_req_find_next()
io_uring: remove io_free_req_find_next()
...
|
||
|
Bjorn Helgaas
|
774800cb09 |
Merge branch 'pci/resource'
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the
MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA devices
downstream (Subbaraya Sundeep)
* pci/resource:
PCI: Do not use bus number zero from EA capability
PCI: Avoid double hpmemsize MMIO window assignment
PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters
PCI: Add PCI_STD_NUM_BARS for the number of standard BARs
PCI: Fix missing bridge dma_ranges resource list cleanup
PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
|
||
|
Bjorn Helgaas
|
e87eb585d3 |
Merge branch 'pci/misc'
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB
2.0 or 1.1 connect events (Kai-Heng Feng)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon
CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word() in
AMDGPU and Radeon CIK/SI (Frederick Lawler)
* pci/misc:
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/amdgpu: Correct Transmit Margin masks
PCI: Add #defines for Enter Compliance, Transmit Margin
PCI: Allow building PCIe things without PCIEPORTBUS
PCI: Remove PCIe Kconfig dependencies on PCI
PCI/ASPM: Remove dependency on PCIEPORTBUS
PCI/PTM: Remove dependency on PCIEPORTBUS
PCI/PTM: Remove spurious "d" from granularity message
PCI: sysfs: Remove unused attribute groups
x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect
PCI: Remove unused includes and superfluous struct declaration
x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y
x86/PCI: Correct SPDX comment style
x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
|