Interrupt result flags have to be cleared before a hardware job is run.
Otherwise, if they are cleared asynchronously, we may end up clearing them
after the interrupt for which we wanted to wait has already arrived, thus
overwriting the job results that we intended to wait for.
To prevent this, clear the flags only under hw_lock and before running
a hardware job.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
G_CTRL on V4L2_CID_MIN_BUFFERS_FOR_CAPTURE will fail if userspace happens to
query it after getting a resolution change event and before the codec has
a chance to parse the header and switch to an initialized state.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This field is no longer used as MFC driver doesn't use vb2 alloc contexts
anymore.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
While resolution change is detected by MFC, we flush out
older dpbs, send the resolution change event to application,
and then accept further queuing of new src buffers.
Sometimes, we error out during dpb flush because of lack of src
buffers. Since we have not started decoding new resolution yet,
it is simpler to push zero-size buffer until we flush out all dpbs.
This is already been done while handling EOS command, and this patch
extends the same logic to resolution change as well.
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the software watchdog kicks in, we need to de-init MFC
before reloading firmware and re-intializing it again.
Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
MFC wakeup command has to be sent after the host receives
firmware load complete status from risc.
Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the software watchdog kicks in, the watchdog worker is not synchronized
with hardware interrupts and does not block other instances. It's possible
for it to clear the hw_lock, making other instances trigger a BUG() on
hw_lock checks. Since it's not fatal to clear the hw_lock to zero twice,
just WARN in those cases for now. We should not explode, as firmware will
return errors as needed for other instances after it's reloaded, or they
will time out.
A clean fix should involve killing other instances when watchdog kicks in,
but requires a major redesign of locking in the driver.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
during reset sequence, it is advisable to follow the below
sequence, in order to avoid unexpected behavior from MFC
. set SFR 0x7110 MFC_BUS_RESET_CTRL 0x1
// wait for REQ_STATUS to be 1
. get SFR 0x7110 MFC_BUS_RESET_CTRL 0x3
// reset now
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reset sequence for MFC V7 and V8 do not need RISC_ON
to be set to 0, while for MFC V6 it is still needed.
Also, remove a couple of register settings during Reset
which are not needed from V6 onwards.
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Timestamp i of a previously decoded buffer was overwritten for some
H.264 streams with timestamp i+1 of the next buffer. This happened when
encountering frame_type S5P_FIMV_DECODE_FRAME_SKIPPED, indicating no
new frame.
In most cases this wrong indexing might not have been noticed except
for a one frame delay in frame presentation. For H.264 streams though
that require reordering of frames for presentation, it caused a slightly
erratic presentation time lookup and consequently dropped frames in the
Pepper Flash plugin.
Signed-off-by: Ilja H. Friedel <ihf@google.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The enter_suspend flag is set after we enter mfc suspend function but if
suspend fails after that due to any reason (like hardware timeout etc),
this flag must be cleared before returning an error. Otherwise, this
flag never gets cleared and the MFC suspend will always return an error
on subsequent tries. If clock off fails, disable hw_lock also.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Handle REQBUFS(0) for CAPTURE queue as well. Also use the proper queue to call
it on for OUTPUT.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add V4L2_CID_MIN_BUFFERS_FOR_OUTPUT query for encoder.
Once mfc encoder state is HEAD_PARSED, which is sequence
header produced, dpb_count is avaialable. Let user space
query this value.
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds a quick check for valid JPEG frames before feeding them into
the bitstream buffer: Frames that do not begin with the JPEG start of image
marker and end with the end of image marker are dropped.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This should fix CODA crashes due to timeouts when stopping
the decoding process with SIGINT.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
For small frame sizes, allocating 1 MiB per compressed buffer is a waste of
space. On the other hand, incompressible 1080p data can produce JPEGs larger
than 1 MiB at higher quality settings. Allow userspace to set the compressed
buffer size and clamp the value to a sensible range.
Also set the initial sizeimage to a value inside the range allowed by try_fmt.
While at it, reduce the default image size to a maximum of 1920*1088 (otherwise
JPEG will default to 8k*8k and 96 MiB buffers).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
With bitstream padding, it is possible to decode a single JPEG in the bitstream
immediately. This allows us to only ever queue a single JPEG into the bitstream
buffer, except to increase payload over 512 bytes or to back out of hold state.
This is a measure to decrease JPEG decoder latency.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Before starting a PIC_RUN, pad the bitstream with 0xff until 256 bytes
past the next multiple of 256 bytes, if the buffer to be decoded is the
last buffer in the bitstream.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Storing the buffer position in the bitstream with the buffer metadata
allows to later use that information to drop metadata for skipped buffers
and to determine whether bitstream padding has to be applied.
This patch also renames struct coda_timestamp to struct coda_buffer_meta
to make clear that it contains more than only the buffer timestamp.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds JPEG encoding and decoding support for CODA7541,
using the BIT processor. Separate JPEG encoder and decoder video
devices are created due to different streaming behaviour and
different supported pixel formats.
The hardware can not change subsampling on the fly, but encode
and decode 4:2:2 subsampled JPEG images from and into this format.
The CODA7541 JPEG decoder uses the bitstream buffer and thus can run
without new buffers queued if there is a buffer in the bitstream.
Since there is no standard way to store the colorspace used in
JPEGs, and to make v4l2-compliance happy, the JPEG format always
reports V4L2_COLORSPACE_JPEG.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch splits the encoder specific controls out of the main control setup
function. This way each video device registers only relevant controls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Each video device descriptor determines the name, callback ops, and input and
output formats on the corresponding video device. This simplifies coda_enum_fmt
and coda_try_fmt a bit and will simplify adding separate video devices for JPEG
codecs due to the slightly different behavior in the CodaDx6/CODA7542 case and
a separate hardware unit on CODA960.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We'll use this information to decide whether to request the JPEG IRQ later.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds support for the three-plane YUV422P format with one luma plane
and two horizontally subsampled chroma planes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds support for the two-plane NV12 format with one luma plane
and one interleaved chroma plane.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Since the firmware newer writes to FRAME_MEM_CTRL, we can initialize it once
per context (incidentally, we already do write it in coda_hw_init) and never
have to read it back.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This will still do a 1:1 copy into the internal buffers, but stop
producing visual artifacts in chroma interleaved (NV12) mode.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add a helper function that writes a vb2_buffer's Y, Cb, and
Cr plane base addresses of into three consecutive registers.
This moves common code out of coda-bit.c.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When devm_kzalloc causes an OOM condition, this is already reported by
the MM subsystem.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Clearing the aborting flag in stop_streaming is necessary if we want to start
streaming again without having to closing and reopening the device. Also,
do not explicitly set it in default_params; the context is zeroed by
kzalloc anyway.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This is 1) *much* easier to type, and 2) is consistent with vivid
('vi' for virtual). More of such virtual drivers are planned, so keeping
the naming consistent makes sense.
Note that the old module name is retained as a module alias.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Initialize components variable in order to avoid
the possibility of using it uninitialized.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If power management is disabled these functions become unused, so there
is no reason to build them. This fixes a couple of build warnings when
PM(_SLEEP,_RUNTIME) is not enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If power management is disabled these function become unused, so there
is no reason to build them. This fixes a couple of build warnings when
PM(_SLEEP,_RUNTIME) is not enabled.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The PLAT_S5P Kconfig symbol was removed in commit d78c16ccde
("ARM: SAMSUNG: Remove remaining legacy code"). However, there
are still some references to that symbol left, fix that by
substituting them with ARCH_S5PV210.
Fixes: d78c16ccde ("ARM: SAMSUNG: Remove remaining legacy code")
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: <stable@vger.kernel.org> # for 3.17
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The random_line buffer must be twice the maximum width, but it only allocated
the maximum width, so it was only half the size it needed to be.
Surprisingly I never saw the kernel fail on this, but the same TPG code used in
qv4l2 crashed and valgrind helped me track this bug down.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vivid driver depends on FB, update the Kconfig accordingly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull slave-dmaengine updates from Vinod Koul:
"For dmaengine contributions we have:
- designware cleanup by Andy
- my series moving device_control users to dmanegine_xxx APIs for
later removal of device_control API
- minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma
etc"
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits)
serial: atmel: add missing dmaengine header
dmaengine: remove FSLDMA_EXTERNAL_START
dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method
carma-fpga: move to fsl_dma_external_start()
carma-fpga: use dmaengine_xxx() API
dmaengine: freescale: add and export fsl_dma_external_start()
dmaengine: add dmaengine_prep_dma_sg() helper
video: mx3fb: use dmaengine_terminate_all() API
serial: sh-sci: use dmaengine_terminate_all() API
net: ks8842: use dmaengine_terminate_all() API
mtd: sh_flctl: use dmaengine_terminate_all() API
mtd: fsmc_nand: use dmaengine_terminate_all() API
V4L2: mx3_camer: use dmaengine_pause() API
dmaengine: coh901318: use dmaengine_terminate_all() API
pata_arasan_cf: use dmaengine_terminate_all() API
dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()
dmaengine: dw: export probe()/remove() and Co to users
dmaengine: dw: enable and disable controller when needed
dmaengine: dw: always export dw_dma_{en,dis}able
dmaengine: dw: introduce dw_dma_on() helper
...
The drivers should use dmaengine_pause() API instead of
accessing the device_control which will be deprecated soon
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Got those warnings when compiling with gcc 4.9.1 for arm64:
drivers/media/platform/exynos4-is/fimc-isp-video.c: In function ‘isp_video_capture_buffer_queue’:
drivers/media/platform/exynos4-is/fimc-isp-video.c:221:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat=]
isp_dbg(2, &video->ve.vdev,
^
drivers/media/platform/exynos4-is/fimc-is.c: In function ‘fimc_is_load_firmware’:
drivers/media/platform/exynos4-is/fimc-is.c:391:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Wformat=]
dev_err(dev, "wrong firmware size: %d\n", fw->size);
^
In file included from include/linux/printk.h:260:0,
from include/linux/kernel.h:13,
from include/linux/kernfs.h:10,
from include/linux/sysfs.h:15,
from include/linux/kobject.h:21,
from include/linux/device.h:17,
from drivers/media/platform/exynos4-is/fimc-is.c:15:
include/linux/dynamic_debug.h:64:16: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:84:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/device.h:1106:2: note: in expansion of macro ‘dynamic_dev_dbg’
dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
^
drivers/media/platform/exynos4-is/fimc-is.c:419:2: note: in expansion of macro ‘dev_dbg’
dev_dbg(dev, "FW size: %d, paddr: %#x\n", fw->size, is->memory.paddr);
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:84:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/device.h:1106:2: note: in expansion of macro ‘dynamic_dev_dbg’
dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
^
drivers/media/platform/exynos4-is/fimc-is.c:419:2: note: in expansion of macro ‘dev_dbg’
dev_dbg(dev, "FW size: %d, paddr: %#x\n", fw->size, is->memory.paddr);
^
drivers/media/platform/exynos4-is/fimc-is.c: In function ‘fimc_is_hw_initialize’:
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media/platform/exynos4-is/fimc-is.c:696:2: note: in expansion of macro ‘pr_debug’
pr_debug("shared region: %#x, parameter region: %#x\n",
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media/platform/exynos4-is/fimc-is.c:696:2: note: in expansion of macro ‘pr_debug’
pr_debug("shared region: %#x, parameter region: %#x\n",
^
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:192:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:196:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:196:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:32: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1757:3: warning: format ‘%zx’ expects argument of type ‘size_t’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1879:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:32: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
CC drivers/media//platform/s5p-mfc/s5p_mfc_opr.o
drivers/media//platform/s5p-mfc/s5p_mfc_opr.c: In function ‘s5p_mfc_alloc_priv_buf’:
drivers/media//platform/s5p-mfc/s5p_mfc_opr.c:44:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
mfc_debug(3, "Allocating priv: %d\n", b->size);
^
drivers/media//platform/s5p-mfc/s5p_mfc_opr.c:53:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
mfc_debug(3, "Allocated addr %p %08x\n", b->virt, b->dma);
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Addresses have the same size of unsigned long, and not u32.
That removes a warning on 64 bits compilation:
drivers/media//platform/ti-vpe/vpdma.c:332:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
WARN_ON(((u32) buf->addr & VPDMA_DESC_ALIGN) != 0);
^
include/asm-generic/bug.h:86:25: note: in definition of macro ‘WARN_ON’
int __ret_warn_on = !!(condition); \
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media//platform/s3c-camif/camif-capture.c: In function ‘camif_prepare_addr’:
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media//platform/s3c-camif/camif-capture.c:283:2: note: in expansion of macro ‘pr_debug’
pr_debug("DMA address: y: %#x cb: %#x cr: %#x\n",
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media//platform/s3c-camif/camif-capture.c:283:2: note: in expansion of macro ‘pr_debug’
pr_debug("DMA address: y: %#x cb: %#x cr: %#x\n",
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media//platform/s3c-camif/camif-capture.c:283:2: note: in expansion of macro ‘pr_debug’
pr_debug("DMA address: y: %#x cb: %#x cr: %#x\n",
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media//platform/s3c-camif/camif-regs.c:217:2: note: in expansion of macro ‘pr_debug’
pr_debug("dst_buf[%d]: %#X, cb: %#X, cr: %#X\n",
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media//platform/s3c-camif/camif-regs.c:217:2: note: in expansion of macro ‘pr_debug’
pr_debug("dst_buf[%d]: %#X, cb: %#X, cr: %#X\n",
^
include/linux/dynamic_debug.h:64:16: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’ [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
drivers/media//platform/s3c-camif/camif-regs.c:217:2: note: in expansion of macro ‘pr_debug’
pr_debug("dst_buf[%d]: %#X, cb: %#X, cr: %#X\n",
^
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are several errors related to size_t size and the usage of
unsigned int for pointers:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_alloc_codec_buffers_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:103:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
mfc_debug(2, "recon luma size: %d chroma size: %d\n",
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:103:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_set_dec_frame_buffer_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:472:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘size_t’ [-Wformat=]
mfc_debug(2, "Luma %d: %x\n", i,
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:476:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘size_t’ [-Wformat=]
mfc_debug(2, "\tChroma %d: %x\n", i,
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:490:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=]
mfc_debug(2, "\tBuf1: %x, size: %d\n",
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:498:2: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=]
mfc_debug(2, "Buf1: %u, buf_size1: %d (frames %d)\n",
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_set_enc_ref_buffer_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:596:2: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=]
mfc_debug(2, "Buf1: %u, buf_size1: %d (ref frames %d)\n",
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_write_info_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:1883:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
writel(data, (volatile void __iomem *)ofs);
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_read_info_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:1893:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
ret = readl((volatile void __iomem *)ofs);
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_get_pic_type_top_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2022:3: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
(__force unsigned int) ctx->dev->mfc_regs->d_ret_picture_tag_top);
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_get_pic_type_bot_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2028:3: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
(__force unsigned int) ctx->dev->mfc_regs->d_ret_picture_tag_bot);
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_get_crop_info_h_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2034:3: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
(__force unsigned int) ctx->dev->mfc_regs->d_display_crop_info1);
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c: In function ‘s5p_mfc_get_crop_info_v_v6’:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2040:3: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
(__force unsigned int) ctx->dev->mfc_regs->d_display_crop_info2);
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When compiled on x86_64, several warnings popup:
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:476:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:480:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:485:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:493:2: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:570:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:570:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:609:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:609:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:640:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:640:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:666:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
drivers/media//platform/s5p-mfc/s5p_mfc_opr_v5.c:666:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Smatch still has 3 warnings for s5p_mfc_opr_v6:
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2028:18: warning: cast removes address space of expression
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2034:18: warning: cast removes address space of expression
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:2040:18: warning: cast removes address space of expression
Remove them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
