Commit Graph

2073 Commits

Author SHA1 Message Date
Linus Torvalds
e0c38a4d1f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...
2018-12-27 13:04:52 -08:00
Christoph Hellwig
4af14d113b scsi: remove the use_clustering flag
The same effects can be achieved by setting the dma_boundary to
PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those
settings into the drivers.  Note that in many cases the setting might
be bogus, but this keeps the status quo.

[mkp: fix myrs and myrb]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:19:21 -05:00
Wei Yongjun
8b2db98e81 scsi: target/core: Use kmem_cache_free() instead of kfree()
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().

Fixes: ad669505c4 ("scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 22:52:14 -05:00
Varun Prakash
9e6371d3c6 scsi: target: iscsi: cxgbit: add missing spin_lock_init()
Add missing spin_lock_init() for cdev->np_lock.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 19:49:35 -05:00
Varun Prakash
ed076c55b3 scsi: target: iscsi: cxgbit: fix csk leak
In case of arp failure call cxgbit_put_csk() to free csk.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 19:49:17 -05:00
David Disseldorp
3beeabd5f2 scsi: target: perform t10_wwn ID initialisation in target_alloc_device()
Initialise the t10_wwn vendor, model and revision defaults when a device is
allocated instead of when it's enabled. This ensures that custom vendor or
model strings set prior to enablement are not later overwritten with
default values.

The TRANSPORT_FLAG_PASSTHROUGH conditional can be dropped for the following
reasons:

 - target_core_pscsi overwrites the defaults in the
   pscsi_configure_device() callback.
   + the contents is then only used for ConfigFS via
     $pscsi_dev/statistics/scsi_lu/vend, etc.

 - target_core_user doesn't touch the defaults, nor are they used for
   anything outside of ConfigFS.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:54:33 -05:00
David Disseldorp
2d88284728 scsi: target: remove hardcoded T10 Vendor ID in INQUIRY response
Use the value stored in t10_wwn.vendor, which defaults to "LIO-ORG", but
can be reconfigured via the vendor_id ConfigFS attribute.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:54:33 -05:00
David Disseldorp
54a6f3f6a4 scsi: target: add device vendor_id configfs attribute
The vendor_id attribute will allow for the modification of the T10 Vendor
Identification string returned in inquiry responses. Its value can be
viewed and modified via the ConfigFS path at:

target/core/$backstore/$name/wwn/vendor_id

"LIO-ORG" remains the default value, which is set when the backstore device
is enabled.

[mkp: corrected VPD page number]

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:54:33 -05:00
David Disseldorp
b2da4abf26 scsi: target: consistently null-terminate t10_wwn strings
In preparation for supporting user provided vendor strings, add an extra
byte to the vendor, model and revision arrays in struct t10_wwn. This
ensures that the full INQUIRY data can be carried in the arrays along with
a null-terminator.

Change a number of array readers and writers so that they account for
explicit null-termination:

- The pscsi_set_inquiry_info() and emulate_model_alias_store() codepaths
  don't currently explicitly null-terminate; fix this.

- Existing t10_wwn field dumps use for-loops which step over
  null-terminators for right-padding.
  + Use printf with width specifiers instead.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:54:33 -05:00
David Disseldorp
0de263577d scsi: target: use consistent left-aligned ASCII INQUIRY data
spc5r17.pdf specifies:

  4.3.1 ASCII data field requirements
  ASCII data fields shall contain only ASCII printable characters (i.e.,
  code values 20h to 7Eh) and may be terminated with one or more ASCII null
  (00h) characters.  ASCII data fields described as being left-aligned
  shall have any unused bytes at the end of the field (i.e., highest
  offset) and the unused bytes shall be filled with ASCII space characters
  (20h).

LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT
IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT
REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR
IDENTIFICATION field in the INQUIRY Device Identification VPD Page are
zero-terminated/zero-padded.

Fix this inconsistency by using space-padding for all of the above fields.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:54:33 -05:00
Bart Van Assche
3ad9800231 scsi: target/core: Reduce the amount of code executed with a spinlock held
Due to the "make ABORT and LUN RESET handling synchronous" patch, cmd->work
is only modified from the regular command execution path and no longer
asynchronously by the code that executes task management functions. Since
the regular command execution code is sequential per command, no locking is
required to manipulate cmd->work. Hence stop protecting cmd->work
manipulations with locking.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:22:55 -05:00
Bart Van Assche
2c9fa49e10 scsi: target/core: Make ABORT and LUN RESET handling synchronous
Instead of invoking target driver callback functions from the context that
handles an abort or LUN RESET task management function, only set the abort
flag from that context and perform the actual abort handling from the
context of the regular command processing flow. This approach has the
advantage that the task management code becomes much easier to read and to
verify since the number of potential race conditions against the command
processing flow is strongly reduced.

This patch has been tested by running the following two shell commands
concurrently for about ten minutes for both the iSCSI and the SRP target
drivers ($dev is an initiator device node connected with storage provided
by the target driver under test):

 * fio with data verification enabled on a filesystem mounted on top of
   $dev.

 * while true; do sg_reset -d $dev; echo -n .; sleep .1; done

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:22:55 -05:00
Bart Van Assche
aaa00cc93c scsi: target/core: Fix TAS handling for aborted commands
The TASK ABORTED STATUS (TAS) bit is defined as follows in SAM:
"TASK_ABORTED: this status shall be returned if a command is aborted by a
command or task management function on another I_T nexus and the control
mode page TAS bit is set to one". TAS handling is spread over the target
core and the iSCSI target driver. If a LUN RESET is received, the target
core will send the TASK_ABORTED response for all commands for which such a
response has to be sent. If an ABORT TASK is received, only the iSCSI
target driver will send the TASK_ABORTED response for the commands for
which that response has to be sent.  That is a bug since all target drivers
have to honor the TAS bit. Fix this by moving the code that handles TAS
from the iSCSI target driver into the target core. Additionally, if a
command has been aborted, instead of sending the TASK_ABORTED status from
the context that processes the SCSI command send it from the context of the
ABORT TMF.  The core_tmr_abort_task() change in this patch causes the
CMD_T_TAS flag to be set if a TASK_ABORTED status has to be sent back to
the initiator that submitted the command. If that flag has been set
transport_cmd_finish_abort() will send the TASK_ABORTED response.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:22:15 -05:00
Bart Van Assche
fbbd492355 scsi: target/core: Simplify the code for aborting SCSI commands
Instead of allowing the code that aborts a SCSI command to finish before
all iSCSI data frames have been received, make that code wait until all
iSCSI data frames have been received. Introduce a new member variable in
the target driver template to communicate that information from the iSCSI
target driver to the target core. This change allows to leave out the check
whether or not it is already safe to send the TASK_ABORTED reply from
transport_send_task_abort().

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Bart Van Assche
a014c3647a scsi: target/core: Make it possible to wait from more than one context for command completion
This patch does not change any functionality but makes the patch that makes
TMF handling synchronous easier to read.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Bart Van Assche
db5b21a24e scsi: target/core: Use system workqueues for TMF
A quote from SAM-5: "The order in which task management requests are
processed is not specified by the SCSI architecture model.  The SCSI
architecture model does not require in-order delivery of such task
management requests or processing by the task manager in the order
received. To guarantee the processing order of task management requests
referencing sent to a specific logical unit, an application client should
not have more than one such task management request pending to that logical
unit." This means that it is safe to use the system workqueues instead of
tmr_wq for processing TMFs. An intended side effect of this patch is that
it enables concurrent processing of TMFs.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Bart Van Assche
ad669505c4 scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough
A session must only be released after all code that accesses the session
structure has finished. Make sure that this is the case by introducing a
new command counter per session that is only decremented after the
.release_cmd() callback has finished. This patch fixes the following crash:

BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130
Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805
CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5
Call Trace:
dump_stack+0xa4/0xf5
print_address_description+0x6f/0x270
kasan_report+0x241/0x360
__asan_load4+0x78/0x80
do_raw_spin_lock+0x1c/0x130
_raw_spin_lock_irqsave+0x52/0x60
srpt_set_ch_state+0x27/0x70 [ib_srpt]
srpt_disconnect_ch+0x1b/0xc0 [ib_srpt]
srpt_close_session+0xa8/0x260 [ib_srpt]
target_shutdown_sessions+0x170/0x180 [target_core_mod]
core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod]
target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
config_item_release+0x9c/0x110 [configfs]
config_item_put+0x26/0x30 [configfs]
configfs_rmdir+0x3b8/0x510 [configfs]
vfs_rmdir+0xb3/0x1e0
do_rmdir+0x262/0x2c0
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Bart Van Assche
a95be3842c scsi: target/core: Simplify transport_clear_lun_ref()
Since transport_clear_lun_ref() already waits until the percpu-refcount
.release() method is called, it is not necessary to wait first until
percpu_ref_kill_and_confirm() has finished transitioning the refcount into
atomic mode. Remove the code that waits for percpu_ref_kill_and_confirm()
to complete and also the completion object that is used by that code.  This
patch does not change the behavior of the SCSI target code.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Bart Van Assche
5d6cd9fe31 scsi: target/core: Use kvcalloc() instead of open-coding it
This patch does not change any functionality. Note: the code that frees
sess_cmd_map already uses kvfree() so that code does not need to be
modified.

Reviewed-by: David Disseldorp <ddiss@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Bart Van Assche
e7f411049f scsi: target/tcmu: Fix queue_cmd_ring() declaration
This patch does not change any functionality but avoids that sparse
complains about the queue_cmd_ring() function and its callers.

Fixes: 6fd0ce7972 ("tcmu: prep queue_cmd_ring to be used by unmap wq")
Reviewed-by: David Disseldorp <ddiss@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07 21:20:07 -05:00
Jens Axboe
5d2ee7122c sbitmap: optimize wakeup check
Even if we have no waiters on any of the sbitmap_queue wait states, we
still have to loop every entry to check. We do this for every IO, so
the cost adds up.

Shift a bit of the cost to the slow path, when we actually have waiters.
Wrap prepare_to_wait_exclusive() and finish_wait(), so we can maintain
an internal count of how many are currently active. Then we can simply
check this count in sbq_wake_ptr() and not have to loop if we don't
have any sleepers.

Convert the two users of sbitmap with waiting, blk-mq-tag and iSCSI.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-30 14:48:04 -07:00
David Disseldorp
59a206b449 scsi: target: replace fabric_ops.name with fabric_alias
iscsi_target_mod is the only LIO fabric where fabric_ops.name differs from
the fabric_ops.fabric_name string.  fabric_ops.name is used when matching
target/$fabric ConfigFS create paths, so rename it .fabric_alias and
fallback to target/$fabric vs .fabric_name comparison if .fabric_alias
isn't initialised.  iscsi_target_mod is the only fabric module to set
.fabric_alias . All other fabric modules rely on .fabric_name matching and
can drop the duplicate string.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 18:50:59 -05:00
David Disseldorp
30c7ca9350 scsi: target: drop unnecessary get_fabric_name() accessor from fabric_ops
All fabrics return a const string. In all cases *except* iSCSI the
get_fabric_name() string matches fabric_ops.name.

Both fabric_ops.get_fabric_name() and fabric_ops.name are user-facing, with
the former being used for PR/ALUA state and the latter for ConfigFS
(config/target/$name), so we unfortunately need to keep both strings around
for now.  Replace the useless .get_fabric_name() accessor function with a
const string fabric_name member variable.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 18:50:58 -05:00
David Disseldorp
6baca7601b scsi: target: drop unused pi_prot_format attribute storage
On write, the pi_prot_format configfs attribute invokes the device
format_prot() callback if present. Read dumps the contents of
se_dev_attrib.pi_prot_format which is always zero.  Make the configfs
attribute write-only, and drop the always zero se_dev_attrib.pi_prot_format
storage.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 18:50:53 -05:00
Santosh Rastapur
02d805dc5f cxgb4: use new fw interface to get the VIN and smt index
If the fw supports returning VIN/VIVLD in FW_VI_CMD save it
in port_info structure else retrieve these from viid and save
them  in port_info structure. Do the same for smt_idx from
FW_VI_MAC_CMD

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23 11:11:15 -08:00
David Disseldorp
b49d6f7885 scsi: target: add emulate_pr backstore attr to toggle PR support
The new emulate_pr backstore attribute allows for Persistent Reservation
and SCSI2 RESERVE/RELEASE support to be completely disabled. This can be
useful for scenarios such as:

- Ensuring ATS (Compare & Write) usage on recent VMware ESXi initiators.

- Allowing clustered (e.g. tcm-user) backends to block such requests,
  avoiding the multi-node reservation state propagation.

When explicitly disabled, PR and RESERVE/RELEASE requests receive Invalid
Command Operation Code response sense data.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-21 22:10:36 -05:00
Jens Axboe
a78b03bc73 Linux 4.20-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlvx2sAeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGycgIAIuxobwt0RRKa0zO
 ROS+34JGoC2yU2P9VdEGWdtxS6ANMVQgKPBhWL6s+xR89Kd+V4xSdJLD1pNTxxqP
 0DCva0np1/Q4juH+JbU50v/lykoLgteZ0P0LBRGf1y8p3WiLPv45IbnNsMDNYhB2
 7a8rOmZYakRY9CPznRDw3X8cJt3sddKgFJHIOGz1OQJVWtCD0KPGcJmQNsbDSagY
 Zx6Z5BKSIdjRqaAdN5gDa1Pft3WQo7TpaQGl80lSsgr5LcjmscXA3sClOCy+25Mo
 FZLx0PcwP+Efq8RTGzNK51WSOMa6d37hvjDqUAdQBOR0KbyjRyXQwyQVw/MGbPJs
 7J3Pzm0=
 =56Mt
 -----END PGP SIGNATURE-----

Merge tag 'v4.20-rc3' into for-4.21/block

Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-18 15:46:03 -07:00
Jens Axboe
92bc5a2484 block: remove __blk_put_request()
Now there's no difference between blk_put_request() and
__blk_put_request() anymore, get rid of the underscore version and
convert the few callers.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Bart Van Assche
5841734fa6 scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE fails
Fixes: aa73237dcb ("scsi: target/core: Always call transport_complete_callback() upon failure")
Reviewed-by: David Disseldorp <ddiss@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-05 22:16:00 -05:00
Linus Torvalds
af102b333a SCSI misc on 20181102
This is a set of minor small (and safe changes) that didn't make the
 initial pull request plus some bug fixes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW9zD2CYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaMPAQDwYDbt
 wsCd4SlAPz1PzAV25GL3zeBpk5UeCjv2/nIzEgEA6P+poJC85aVznrjNQ2kUyWdS
 h/NrvG9UJmvVngKpDWQ=
 =FHI8
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is a set of minor small (and safe changes) that didn't make the
  initial pull request plus some bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mvsas: Remove set but not used variable 'id'
  scsi: qla2xxx: Remove two arguments from qlafx00_error_entry()
  scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res'
  scsi: qla2xxx: Remove a set-but-not-used variable
  scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze
  scsi: qla2xxx: Declare local functions 'static'
  scsi: qla2xxx: Improve several kernel-doc headers
  scsi: qla2xxx: Modify fall-through annotations
  scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb
  scsi: mvsas: Use dma_pool_zalloc
  scsi: target: Don't request modules that aren't even built
  scsi: target: Set response length for REPORT TARGET PORT GROUPS
2018-11-03 10:34:03 -07:00
Linus Torvalds
9931a07d51 Merge branch 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
 "AFS series, with some iov_iter bits included"

* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  missing bits of "iov_iter: Separate type from direction and use accessor functions"
  afs: Probe multiple fileservers simultaneously
  afs: Fix callback handling
  afs: Eliminate the address pointer from the address list cursor
  afs: Allow dumping of server cursor on operation failure
  afs: Implement YFS support in the fs client
  afs: Expand data structure fields to support YFS
  afs: Get the target vnode in afs_rmdir() and get a callback on it
  afs: Calc callback expiry in op reply delivery
  afs: Fix FS.FetchStatus delivery from updating wrong vnode
  afs: Implement the YFS cache manager service
  afs: Remove callback details from afs_callback_break struct
  afs: Commit the status on a new file/dir/symlink
  afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
  afs: Don't invoke the server to read data beyond EOF
  afs: Add a couple of tracepoints to log I/O errors
  afs: Handle EIO from delivery function
  afs: Fix TTL on VL server and address lists
  afs: Implement VL server rotation
  afs: Improve FS server rotation error handling
  ...
2018-11-01 19:58:52 -07:00
Linus Torvalds
d49f8a52b1 SCSI misc on 20181024
This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
 qla2xxx, lpfc, libsas, hisi_sas.  In addition there's a set of mostly
 small updates to the target subsystem a set of conversions to the
 generic DMA API, which do have some potential for issues in the older
 drivers but we'll handle those as case by case fixes. A new myrs for
 the DAC960/mylex raid controllers to replace the block based DAC960
 which is also being removed by Jens in this merge window. Plus the
 usual slew of trivial changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW9BQJSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU3MAP41T8yW
 UJQDCprj65pCR+9mOUWzgMvgAW/15ouK89x/7AD/XAEQZqoAgpFUbgnoZWGddZkS
 LykIzSiLHP4qeDOh1TQ=
 =2JMU
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
  qla2xxx, lpfc, libsas, hisi_sas.

  In addition there's a set of mostly small updates to the target
  subsystem a set of conversions to the generic DMA API, which do have
  some potential for issues in the older drivers but we'll handle those
  as case by case fixes.

  A new myrs driver for the DAC960/mylex raid controllers to replace the
  block based DAC960 which is also being removed by Jens in this merge
  window.

  Plus the usual slew of trivial changes"

[ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even
  wonder. There's also a "myrb" driver, where the 'b' stands for
  'block'. Truly, somebody has got mad naming skillz. - Linus ]

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits)
  scsi: myrs: Fix the processor absent message in processor_show()
  scsi: myrs: Fix a logical vs bitwise bug
  scsi: hisi_sas: Fix NULL pointer dereference
  scsi: myrs: fix build failure on 32 bit
  scsi: fnic: replace gross legacy tag hack with blk-mq hack
  scsi: mesh: switch to generic DMA API
  scsi: ips: switch to generic DMA API
  scsi: smartpqi: fully convert to the generic DMA API
  scsi: vmw_pscsi: switch to generic DMA API
  scsi: snic: switch to generic DMA API
  scsi: qla4xxx: fully convert to the generic DMA API
  scsi: qla2xxx: fully convert to the generic DMA API
  scsi: qla1280: switch to generic DMA API
  scsi: qedi: fully convert to the generic DMA API
  scsi: qedf: fully convert to the generic DMA API
  scsi: pm8001: switch to generic DMA API
  scsi: nsp32: switch to generic DMA API
  scsi: mvsas: fully convert to the generic DMA API
  scsi: mvumi: switch to generic DMA API
  scsi: mpt3sas: switch to generic DMA API
  ...
2018-10-25 07:40:30 -07:00
Roland Dreier
6110f37fb3 scsi: target: Don't request modules that aren't even built
If, for example, I don't enable CONFIG_TCM_PSCSI, then every time I load
the target subsystem, I get an annoying

    Unable to load target_core_pscsi

kernel log message.  Instead let's only request_module() on things if
that code is enabled.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-23 21:19:20 -04:00
Roland Dreier
7081fb629e scsi: target: Set response length for REPORT TARGET PORT GROUPS
One more place where we can return the length we actually fill in.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-23 21:18:33 -04:00
David Howells
aa563d7bca iov_iter: Separate type from direction and use accessor functions
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.

Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements.  This makes it easier to add further
iterator types.  Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.

Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself.  Only the direction is required.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24 00:41:07 +01:00
Bart Van Assche
aa73237dcb scsi: target/core: Always call transport_complete_callback() upon failure
COMPARE AND WRITE command execution starts with a call of
sbc_compare_and_write(). That function locks the caw_sem member in the
backend device data structure and submits a read request to the backend
driver. Upon successful completion of the read compare_and_write_callback()
gets called. That last function compares the data that has been read. If it
matches transport_complete_callback is set to compare_and_write_post and a
write request is submitted. compare_and_write_post() submits a write request
to the backend driver.

XDWRITEREAD command execution starts with sbc_execute_rw() submitting a
read to the backend device. Upon successful completion of the read the
xdreadwrite_callback() gets called. That function xors the data that has
been read with the data in the data-out buffer and stores the result in
the data-in buffer.

Call transport_complete_callback() not only if COMPARE AND WRITE fails but
also if XDWRITEREAD fails. This makes the code more systematic. Make sure
that the callback functions handle (cmd, false, NULL) argument triples fine.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 01:13:35 -04:00
Bart Van Assche
81b6ca6dba scsi: target/core: Use sg_alloc_table() instead of open-coding it
The purpose of sg_alloc_table() is to allocate and initialize an
sg-list. Use that function instead of open-coding it. This patch will
make it easier to share code for caching sg-list allocations between the
SCSI and NVMe target cores.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 01:13:35 -04:00
Bart Van Assche
80b045b385 scsi: target/core: Use the SECTOR_SHIFT constant
Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>,
use it. This patch does not change any functionality.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 01:13:35 -04:00
Bart Van Assche
5e568d22fc scsi: target/core: Remove the SCF_COMPARE_AND_WRITE_POST flag
Commit 057085e522 ("target: Fix race for SCF_COMPARE_AND_WRITE_POST
checking") removed the code that checks the SCF_COMPARE_AND_WRITE_POST
flag.  Hence also remove the flag itself.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 01:13:35 -04:00
Bart Van Assche
c1fbff8635 scsi: target/core: Remove an unused data member from struct xcopy_pt_cmd
A value is assigned to the xcopy_op member of struct xcopy_pt_cmd but
that value is never used. Hence remove the xcopy_op member.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 01:13:35 -04:00
Bart Van Assche
4240d448a4 scsi: target/core: Fix spelling in two source code comments
Change one occurrence of "aleady" into "already" and one occurrence of
"is" into "if".

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 01:13:35 -04:00
David Disseldorp
33b3f8ca51 scsi: target: stash sess_err_stats on Data-Out timeout
sess_err_stats are currently filled on NOP ping timeout, but not Data-Out
timeout. Stash details of Data-Out timeouts using a
ISCSI_SESS_ERR_CXN_TIMEOUT value for last_sess_failure_type.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 00:38:37 -04:00
David Disseldorp
dce6190ca7 scsi: target: split out helper for cxn timeout error stashing
Replace existing nested code blocks with helper function calls.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 00:38:37 -04:00
David Disseldorp
c62ae3005b scsi: target: log NOP ping timeouts as errors
Events resulting in connection outages like this should be logged as
errors. Include the I_T Nexus in the message to aid path identification.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 00:38:36 -04:00
David Disseldorp
d9a771fd42 scsi: target: log Data-Out timeouts as errors
Data-Out timeouts resulting in connection outages should be logged as
errors. Include the I_T Nexus in the message to aid path identification.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 00:38:36 -04:00
David Disseldorp
df711553f4 scsi: target: use ISCSI_IQN_LEN in iscsi_target_stat
Move the ISCSI_IQN_LEN definition up, so that it can be used in more
places instead of a hardcoded value.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 00:38:36 -04:00
Nicholas Bellinger
38fe73cc2c scsi: target: Fix target_wait_for_sess_cmds breakage with active signals
With the addition of commit 00d909a107 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") in v4.19-rc, it
incorrectly assumes no signals will be pending for task_struct executing the
normal session shutdown and I/O quiesce code-path.

For example, iscsi-target and iser-target issue SIGINT to all kthreads as part
of session shutdown.  This has been the behaviour since day one.

As-is when signals are pending with se_cmds active in se_sess->sess_cmd_list,
wait_event_interruptible_lock_irq_timeout() returns a negative number and
immediately kills the machine because of the do while (ret <= 0) loop that was
added in commit 00d909a107 to spin while backend I/O is taking any amount of
extended time (say 30 seconds) to complete.

Here's what it looks like in action with debug plus delayed backend I/O
completion:

[ 4951.909951] se_sess: 000000003e7e08fa before target_wait_for_sess_cmds
[ 4951.914600] target_wait_for_sess_cmds: signal_pending: 1
[ 4951.918015] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 0
[ 4951.921639] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 1
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 2
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 3
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 4
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 5
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 6
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 7
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 8
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 9

... followed by the usual RCU CPU stalls and deadlock.

There was never a case pre commit 00d909a107 where
wait_for_complete(&se_cmd->cmd_wait_comp) was able to be interrupted, so to
address this for v4.19+ moving forward go ahead and use
wait_event_lock_irq_timeout() instead so new code works with all fabric
drivers.

Also for commit 00d909a107, fix a minor regression in
target_release_cmd_kref() to only wake_up the new se_sess->cmd_list_wq only
when shutdown has actually been triggered via se_sess->sess_tearing_down.

Fixes: 00d909a107 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 00:11:13 -04:00
Bart Van Assche
9305455acf block: Finish renaming REQ_DISCARD into REQ_OP_DISCARD
Some time ago REQ_DISCARD was renamed into REQ_OP_DISCARD. Some comments
and documentation files were not updated however. Update these comments
and documentation files. See also commit 4e1b2d52a8 ("block, fs,
drivers: remove REQ_OP compat defs and related code").

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-03 16:12:28 -06:00
Varun Prakash
801df68d61 scsi: target: iscsi: cxgbit: fix csk leak
csk leak can happen if a new TCP connection gets established after
cxgbit_accept_np() returns, to fix this leak free remaining csk in
cxgbit_free_np().

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-25 21:29:37 -04:00
Vincent Pelletier
8c39e2699f scsi: target: iscsi: Use bin2hex instead of a re-implementation
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21 12:32:30 -04:00
Vincent Pelletier
1816494330 scsi: target: iscsi: Use hex2bin instead of a re-implementation
This change has the following effects, in order of descreasing importance:

1) Prevent a stack buffer overflow

2) Do not append an unnecessary NULL to an anyway binary buffer, which
   is writing one byte past client_digest when caller is:
   chap_string_to_hex(client_digest, chap_r, strlen(chap_r));

The latter was found by KASAN (see below) when input value hes expected size
(32 hex chars), and further analysis revealed a stack buffer overflow can
happen when network-received value is longer, allowing an unauthenticated
remote attacker to smash up to 17 bytes after destination buffer (16 bytes
attacker-controlled and one null).  As switching to hex2bin requires
specifying destination buffer length, and does not internally append any null,
it solves both issues.

This addresses CVE-2018-14633.

Beyond this:

- Validate received value length and check hex2bin accepted the input, to log
  this rejection reason instead of just failing authentication.

- Only log received CHAP_R and CHAP_C values once they passed sanity checks.

==================================================================
BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021

CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G           O      4.17.8kasan.sess.connops+ #2
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014
Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod]
Call Trace:
 dump_stack+0x71/0xac
 print_address_description+0x65/0x22e
 ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
 kasan_report.cold.6+0x241/0x2fd
 chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
 chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod]
 ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod]
 ? ftrace_caller_op_ptr+0xe/0xe
 ? __orc_find+0x6f/0xc0
 ? unwind_next_frame+0x231/0x850
 ? kthread+0x1a0/0x1c0
 ? ret_from_fork+0x35/0x40
 ? ret_from_fork+0x35/0x40
 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? deref_stack_reg+0xd0/0xd0
 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? is_module_text_address+0xa/0x11
 ? kernel_text_address+0x4c/0x110
 ? __save_stack_trace+0x82/0x100
 ? ret_from_fork+0x35/0x40
 ? save_stack+0x8c/0xb0
 ? 0xffffffffc1660000
 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod]
 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? process_one_work+0x35c/0x640
 ? worker_thread+0x66/0x5d0
 ? kthread+0x1a0/0x1c0
 ? ret_from_fork+0x35/0x40
 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod]
 ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod]
 chap_main_loop+0x172/0x570 [iscsi_target_mod]
 ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod]
 ? rx_data+0xd6/0x120 [iscsi_target_mod]
 ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod]
 ? cyc2ns_read_begin.part.2+0x90/0x90
 ? _raw_spin_lock_irqsave+0x25/0x50
 ? memcmp+0x45/0x70
 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod]
 ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod]
 ? del_timer+0xe0/0xe0
 ? memset+0x1f/0x40
 ? flush_sigqueue+0x29/0xd0
 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod]
 ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod]
 process_one_work+0x35c/0x640
 worker_thread+0x66/0x5d0
 ? flush_rcu_work+0x40/0x40
 kthread+0x1a0/0x1c0
 ? kthread_bind+0x30/0x30
 ret_from_fork+0x35/0x40

The buggy address belongs to the page:
page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x17fffc000000000()
raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00
 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00
>ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00
                                              ^
 ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2
 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00
==================================================================

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21 12:31:13 -04:00
Greg Edwards
fed564f650 scsi: target: iblock: split T10 PI SGL across command bios
When T10 PI is enabled on a backing device for the iblock backstore, the PI
SGL for the entire command is attached to the first bio only.  This works fine
if the command is covered by a single bio, but can result in ref tag errors in
the client for the other bios in a multi-bio command, e.g.

[   47.631236] sda: ref tag error at location 2048 (rcvd 0)
[   47.637658] sda: ref tag error at location 4096 (rcvd 0)
[   47.644228] sda: ref tag error at location 6144 (rcvd 0)

The command will be split into multiple bios if the number of data SG elements
exceeds BIO_MAX_PAGES (see iblock_get_bio()).

The bios may later be split again in the block layer on the host after
iblock_submit_bios(), depending on the queue limits of the backing device.
The block and SCSI layers will pass through the whole PI SGL down to the LLDD
however that first bio is split up, but the LLDD may only use the portion that
corresponds to the data length (depends on the LLDD, tested with scsi_debug).

Split the PI SGL across the bios in the command, so each bio's
bio_integrity_payload contains the protection information for the data in the
bio.  Use an sg_mapping_iter to keep track of where we are in PI SGL, so we
know where to start with the next bio.

Signed-off-by: Greg Edwards <gedwards@ddn.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20 22:27:00 -04:00
Colin Ian King
902ff8603e scsi: iscsi: target: fix spelling mistake "entires" -> "entries"
Trivial fix to spelling mistake in function name and comment

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-17 02:32:29 -04:00
Laura Abbott
679fcae46c scsi: iscsi: target: Don't use stack buffer for scatterlist
Fedora got a bug report of a crash with iSCSI:

kernel BUG at include/linux/scatterlist.h:143!
...
RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod]
...
 Call Trace:
  ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
  iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod]
  ? native_sched_clock+0x3e/0xa0
  ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
  iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod]
  kthread+0x120/0x140
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x3a/0x50

This is a BUG_ON for using a stack buffer with a scatterlist.  There
are two cases that trigger this bug. Switch to using a dynamically
allocated buffer for one case and do not assign a NULL buffer in
another case.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11 20:47:08 -04:00
Mike Christie
05a86e78ea scsi: iscsi: target: Fix conn_ops double free
If iscsi_login_init_conn fails it can free conn_ops.
__iscsi_target_login_thread will then call iscsi_target_login_sess_out
which will also free it.

This fixes the problem by organizing conn allocation/setup into parts that
are needed through the life of the conn and parts that are only needed for
the login. The free functions then release what was allocated in the alloc
functions.

With this patch we have:

iscsit_alloc_conn/iscsit_free_conn - allocs/frees the conn we need for the
entire life of the conn.

iscsi_login_init_conn/iscsi_target_nego_release - allocs/frees the parts
of the conn that are only needed during login.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30 07:07:12 -04:00
Vincent Pelletier
7915919bb9 scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails
Fixes a use-after-free reported by KASAN when later
iscsi_target_login_sess_out gets called and it tries to access
conn->sess->se_sess:

Disabling lock debugging due to kernel taint
iSCSI Login timeout on Network Portal [::]:3260
iSCSI Login negotiation failed.
==================================================================
BUG: KASAN: use-after-free in
iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980

CPU: 1 PID: 980 Comm: iscsi_np Tainted: G           O
4.17.8kasan.sess.connops+ #4
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB,
BIOS 5.6.5 05/19/2014
Call Trace:
 dump_stack+0x71/0xac
 print_address_description+0x65/0x22e
 ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
 kasan_report.cold.6+0x241/0x2fd
 iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
 iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod]
 ? __sched_text_start+0x8/0x8
 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod]
 ? __kthread_parkme+0xcc/0x100
 ? parse_args.cold.14+0xd3/0xd3
 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod]
 kthread+0x1a0/0x1c0
 ? kthread_bind+0x30/0x30
 ret_from_fork+0x35/0x40

Allocated by task 980:
 kasan_kmalloc+0xbf/0xe0
 kmem_cache_alloc_trace+0x112/0x210
 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod]
 kthread+0x1a0/0x1c0
 ret_from_fork+0x35/0x40

Freed by task 980:
 __kasan_slab_free+0x125/0x170
 kfree+0x90/0x1d0
 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod]
 kthread+0x1a0/0x1c0
 ret_from_fork+0x35/0x40

The buggy address belongs to the object at ffff880109d06f00
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 456 bytes inside of
 512-byte region [ffff880109d06f00, ffff880109d07100)
The buggy address belongs to the page:
page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000
index:0x0 compound_mapcount: 0
flags: 0x17fffc000008100(slab|head)
raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                              ^
 ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
[rebased against idr/ida changes and to handle ret review comments from Matthew]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30 07:04:44 -04:00
Varun Prakash
cedefa8544 scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
DDP programming happens in data path and it can fail because of lack of
resources so use pr_debug() instead of pr_info() for this case.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27 12:26:10 -04:00
Linus Torvalds
aba16dc5cf Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax
Pull IDA updates from Matthew Wilcox:
 "A better IDA API:

      id = ida_alloc(ida, GFP_xxx);
      ida_free(ida, id);

  rather than the cumbersome ida_simple_get(), ida_simple_remove().

  The new IDA API is similar to ida_simple_get() but better named.  The
  internal restructuring of the IDA code removes the bitmap
  preallocation nonsense.

  I hope the net -200 lines of code is convincing"

* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
  ida: Change ida_get_new_above to return the id
  ida: Remove old API
  test_ida: check_ida_destroy and check_ida_alloc
  test_ida: Convert check_ida_conv to new API
  test_ida: Move ida_check_max
  test_ida: Move ida_check_leaf
  idr-test: Convert ida_check_nomem to new API
  ida: Start new test_ida module
  target/iscsi: Allocate session IDs from an IDA
  iscsi target: fix session creation failure handling
  drm/vmwgfx: Convert to new IDA API
  dmaengine: Convert to new IDA API
  ppc: Convert vas ID allocation to new IDA API
  media: Convert entity ID allocation to new IDA API
  ppc: Convert mmu context allocation to new IDA API
  Convert net_namespace to new IDA API
  cb710: Convert to new IDA API
  rsxx: Convert to new IDA API
  osd: Convert to new IDA API
  sd: Convert to new IDA API
  ...
2018-08-26 11:48:42 -07:00
Matthew Wilcox
31ff0ceeb2 target/iscsi: Allocate session IDs from an IDA
Since the session is never looked up by ID, we can use the more
space-efficient IDA instead of the IDR.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-21 23:54:19 -04:00
Mike Christie
26abc916a8 iscsi target: fix session creation failure handling
The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in
iscsi_login_set_conn_values. If the function fails later like when we
alloc the idr it does kfree(sess) and leaves the conn->sess pointer set.
iscsi_login_zero_tsih_s1 then returns -Exyz and we then call
iscsi_target_login_sess_out and access the freed memory.

This patch has iscsi_login_zero_tsih_s1 either completely setup the
session or completely tear it down, so later in
iscsi_target_login_sess_out we can just check for it being set to the
connection.

Cc: stable@vger.kernel.org
Fixes: 0957627a99 ("iscsi-target: Fix sess allocation leak in...")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-21 23:54:19 -04:00
Linus Torvalds
72f02ba66b SCSI misc on 20180815
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
 hisi_sas, smartpqi, megaraid_sas, arcmsr.  In addition, with the
 continuing absence of Nic we have target updates for tcmu and target
 core (all with reviews and acks).  The biggest observable change is
 going to be that we're (again) trying to switch to mulitqueue as the
 default (a user can still override the setting on the kernel command
 line).  Other major core stuff is the removal of the remaining
 Microchannel drivers, an update of the internal timers and some
 reworks of completion and result handling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
 dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
 o/JckEZZpIp+5NySZNc=
 =ggLB
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
  hisi_sas, smartpqi, megaraid_sas, arcmsr.

  In addition, with the continuing absence of Nic we have target updates
  for tcmu and target core (all with reviews and acks).

  The biggest observable change is going to be that we're (again) trying
  to switch to mulitqueue as the default (a user can still override the
  setting on the kernel command line).

  Other major core stuff is the removal of the remaining Microchannel
  drivers, an update of the internal timers and some reworks of
  completion and result handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
  scsi: ufs: remove unnecessary query(DM) UPIU trace
  scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
  scsi: aacraid: Spelling fix in comment
  scsi: mpt3sas: Fix calltrace observed while running IO & reset
  scsi: aic94xx: fix an error code in aic94xx_init()
  scsi: st: remove redundant pointer STbuffer
  scsi: qla2xxx: Update driver version to 10.00.00.08-k
  scsi: qla2xxx: Migrate NVME N2N handling into state machine
  scsi: qla2xxx: Save frame payload size from ICB
  scsi: qla2xxx: Fix stalled relogin
  scsi: qla2xxx: Fix race between switch cmd completion and timeout
  scsi: qla2xxx: Fix Management Server NPort handle reservation logic
  scsi: qla2xxx: Flush mailbox commands on chip reset
  scsi: qla2xxx: Fix unintended Logout
  scsi: qla2xxx: Fix session state stuck in Get Port DB
  scsi: qla2xxx: Fix redundant fc_rport registration
  scsi: qla2xxx: Silent erroneous message
  scsi: qla2xxx: Prevent sysfs access when chip is down
  scsi: qla2xxx: Add longer window for chip reset
  ...
2018-08-15 22:06:26 -07:00
Linus Torvalds
73ba2fb33c for-4.19/block-20180812
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAltwvasQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpv65EACTq5gSLnJBI6ZPr1RAHruVDnjfzO2Veitl
 tUtjm0XfWmnEiwQ3dYvnyhy99xbyaG3900d9BClCTlH6xaUdSiQkDpcKG/R2F36J
 5mZitYukQcpFAQJWF8YKsTTE7JPl4VglCIDqYiC4+C3rOSVi8lrKn2qp4J4MMCFn
 thRg3jCcq7c5s9Eigsop1pXWQSasubkXfk55Krcp4oybKYpYRKXXf74Mj14QAbwJ
 QHN3VisyAUWoBRg7UQZo1Npe2oPk6bbnJypnjf8M0M2EnlvddEkIlHob91sodka8
 6p4APOEu5cbyXOBCAQsw/koff14mb8aEadqeQA68WvXfIdX9ZjfxCX0OoC3sBEXk
 yqJhZ0C980AM13zIBD8ejv4uasGcPca8W+47mE5P8sRiI++5kBsFWDZPCtUBna0X
 2Kh24NsmEya9XRR5vsB84dsIPQ3tLMkxg/IgQRVDaSnfJz0c/+zm54xDyKRaFT4l
 5iERk2WSkm9+8jNfVmWG0edrv6nRAXjpGwFfOCPh6/LCSCi4xQRULYN7sVzsX8ZK
 FRjt24HftBI8mJbh4BtweJvg+ppVe1gAk3IO3HvxAQhv29Hz+uvFYe9kL+3N8LJA
 Qosr9n9O4+wKYizJcDnw+5iPqCHfAwOm9th4pyedR+R7SmNcP3yNC8AbbheNBiF5
 Zolos5H+JA==
 =b9ib
 -----END PGP SIGNATURE-----

Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "First pull request for this merge window, there will also be a
  followup request with some stragglers.

  This pull request contains:

   - Fix for a thundering heard issue in the wbt block code (Anchal
     Agarwal)

   - A few NVMe pull requests:
      * Improved tracepoints (Keith)
      * Larger inline data support for RDMA (Steve Wise)
      * RDMA setup/teardown fixes (Sagi)
      * Effects log suppor for NVMe target (Chaitanya Kulkarni)
      * Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
      * TP4004 (ANA) support (Christoph)
      * Various NVMe fixes

   - Block io-latency controller support. Much needed support for
     properly containing block devices. (Josef)

   - Series improving how we handle sense information on the stack
     (Kees)

   - Lightnvm fixes and updates/improvements (Mathias/Javier et al)

   - Zoned device support for null_blk (Matias)

   - AIX partition fixes (Mauricio Faria de Oliveira)

   - DIF checksum code made generic (Max Gurtovoy)

   - Add support for discard in iostats (Michael Callahan / Tejun)

   - Set of updates for BFQ (Paolo)

   - Removal of async write support for bsg (Christoph)

   - Bio page dirtying and clone fixups (Christoph)

   - Set of bcache fix/changes (via Coly)

   - Series improving blk-mq queue setup/teardown speed (Ming)

   - Series improving merging performance on blk-mq (Ming)

   - Lots of other fixes and cleanups from a slew of folks"

* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
  blkcg: Make blkg_root_lookup() work for queues in bypass mode
  bcache: fix error setting writeback_rate through sysfs interface
  null_blk: add lock drop/acquire annotation
  Blk-throttle: reduce tail io latency when iops limit is enforced
  block: paride: pd: mark expected switch fall-throughs
  block: Ensure that a request queue is dissociated from the cgroup controller
  block: Introduce blk_exit_queue()
  blkcg: Introduce blkg_root_lookup()
  block: Remove two superfluous #include directives
  blk-mq: count the hctx as active before allocating tag
  block: bvec_nr_vecs() returns value for wrong slab
  bcache: trivial - remove tailing backslash in macro BTREE_FLAG
  bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
  bcache: set max writeback rate when I/O request is idle
  bcache: add code comments for bset.c
  bcache: fix mistaken comments in request.c
  bcache: fix mistaken code comments in bcache.h
  bcache: add a comment in super.c
  bcache: avoid unncessary cache prefetch bch_btree_node_get()
  bcache: display rate debug parameters to 0 when writeback is not running
  ...
2018-08-14 10:23:25 -07:00
Christoph Hellwig
e33e5c8576 target/loop: depend on SCSI
The target loopback driver is a low-level driver for the SCSI subsystem,
and as such needs to depend on it.

Fixes: 8a39a047 ("target: don't depend on SCSI")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-07 07:57:32 -06:00
Christoph Hellwig
8a39a04783 target: don't depend on SCSI
The core target code only needs code from scsi_common.c, which is now
separately selectable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-02 15:19:49 -06:00
Mike Christie
25b88550b7 scsi: target: loop, usb, vhost, xen: use target_remove_session
This converts drivers that were only calling transport_deregister_session
to use target_remove_session. The calling of
transport_deregister_session_configfs via target_remove_session for these
types of drivers is ok, because they were not exporting info from fields
like sess_acl_list, sess->se_tpg and sess->fabric_sess_ptr from configfs
accessible functions, so they will see no difference.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
60daca1006 scsi: tcm_fc: use target_remove_session
This converts tcm_fc to use target_remove_session

tcm_fc was calling transport_deregister_session_configfs then calling
transport_deregister_session when commands have completed. It should be ok
for it to call transport_deregister_session_configfs later via
target_remove_session because transport_deregister_session_configfs only
prevents access from configfs via tpg removal and its call to the
close_session callback for that driver, and this is already protected by
the ft_lport_lock and its port lookup handling.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
b287e3517e scsi: target: srp, vscsi, sbp, qla: use target_remove_session
This converts the drivers that called transport_deregister_session_configfs
and then immediately called transport_deregister_session to use
target_remove_session.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
fb7c70f2d7 scsi: target: add session removal function
This adds a function to remove a session which should be used by drivers
that use target_setup_session. The next patches will convert the target
drivers to use this new function.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
fa83428730 scsi: target: rename target_alloc_session
Rename target_alloc_session to target_setup_session to avoid confusion with
the other transport session allocation function that only allocates the
session and because the target_alloc_session does so much more. It
allocates the session, sets up the nacl and registers the session.

The next patch will then add a remove function to match the setup in this
one, so it should make sense for all drivers, except iscsi, to just call
those 2 functions to setup and remove a session.

iscsi will continue to be the odd driver.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
3cd14285a1 scsi: target: make transport_init_session_tags static
transport_init_session_tags is only called from target_core_transport.c so
make it static.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
aeb502794b scsi: iscsi target: have iscsit_start_nopin_timer call __iscsit_start_nopin_timer
Just have iscsit_start_nopin_timer grab the lock and call
__iscsit_start_nopin_timer.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Mike Christie
6a64f6e159 scsi: target: fix __transport_register_session locking
When __transport_register_session is called from transport_register_session
irqs will already have been disabled, so we do not want the unlock irq call
to enable them until the higher level has done the final
spin_unlock_irqrestore/ spin_unlock_irq.

This has __transport_register_session use the save/restore call.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 15:29:31 -04:00
Bart Van Assche
c8a75afbf7 Revert "scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers"
The cxgbit driver expects that __iscsit_free_cmd() is called before the
target core frees the command page list. Since this patch breaks the
cxgbit driver, revert it.

Reported-by: Varun Prakash <varun@chelsio.com>
Fixes: ed88f05578 ("scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:30:51 -04:00
Mike Christie
0e0d752671 scsi: tcmu: use u64 for dev_size
We use unsigned long, size_t and u64 for dev_size. This has us standardize
on u64.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:29:34 -04:00
Mike Christie
b60cb1f801 scsi: tcmu: use match_int for dev params
Instead of doing strdup and kstrto* just use match_int for dev params.

It will be ok to use int instead of unsigned long in tcmu_set_dev_attrib
because that is only being used for max sectors and block size and the
supported values for them are well under the max possible integer value.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
c97840c84f scsi: tcmu: do not set max_blocks if data_bitmap has been setup
This patch prevents a bug where data_bitmap is allocated in
tcmu_configure_device, userspace changes the max_blocks setting, the device
is mapped to a LUN, then we try to access the data_bitmap based on the new
max_blocks limit which may now be out of range.

To prevent this, we just check if data_bitmap has been setup. If it has
then we fail the max_blocks update operation.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
dc335a9955 scsi: tcmu: unmap if dev is configured
The tcmu dev is added to the list of tcmu devices during configuration.  At
this time the tcmu setup has completed, but lio core has not completed its
setup. The device is not yet usable so do not try to unmap blocks from it

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
a30b0473b6 scsi: tcmu: check if dev is configured before block/reset
Do not allow userspace to block or reset the ring until the device has been
configured. This will prevent the bug where userspace can write to those
files and access mb_addr before it has been setup.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
63d5be0f6a scsi: tcmu: use lio core se_device configuration helper
Use the lio core helper to check if the device is configured.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
cb0f32e12c scsi: target: add helper to check if dev is configured
This just adds a helper function to check if a device is configured and it
converts the target users to use it. The next patch will add a backend
module user so those types of modules do not have to know the lio core
details.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
ff07e4a414 scsi: tcmu: initialize list head
Use INIT_LIST_HEAD to initialize node list head.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Mike Christie
f0e89aae60 scsi: target_core_user: fix double unlock
The caller of queue_cmd_ring grabs and releases the lock, so the
tcmu_setup_cmd_timer failure handling inside queue_cmd_ring should not call
mutex_unlock.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 23:17:53 -04:00
Varun Prakash
1b350ea0c2 scsi: target: iscsi: cxgbit: fix max iso npdu calculation
- rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating
  max_iso_npdu to get max TCP payload in multiple of mss.

- call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set
  csk->submode, it is used in calculating number of iso pdus.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-12 23:04:06 -04:00
Bart Van Assche
e936a38ac9 scsi: target: Remove se_dev_entry.ua_count
se_dev_entry.ua_count is only used to check whether or not
se_dev_entry.ua_list is empty. Use list_empty_careful() instead.  Checking
whether or not ua_list is empty without holding the lock that protects that
list is fine because the code that dequeues from that list will check again
whether or not that list is empty.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:32 -04:00
Bart Van Assche
325c1e8b24 scsi: target: Fix handling of removed LUNs
Send a valid ASC / ASCQ combination back to the initiator if a SCSI command
is received after a LUN has been removed. This patch fixes the following
call trace:

WARNING: CPU: 0 PID: 4 at drivers/target/target_core_transport.c:3131 translate_sense_reason+0x164/0x190 [target_core_mod]
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
RIP: 0010:translate_sense_reason+0x164/0x190 [target_core_mod]
Call Trace:
transport_send_check_condition_and_sense+0x95/0x1c0 [target_core_mod]
transport_generic_request_failure+0x102/0x270 [target_core_mod]
transport_generic_new_cmd+0x138/0x340 [target_core_mod]
transport_handle_cdb_direct+0x2f/0x80 [target_core_mod]
target_submit_cmd_map_sgls+0x212/0x2a0 [target_core_mod]
srpt_handle_new_iu+0x244/0x680 [ib_srpt]
__ib_process_cq+0x6d/0xc0 [ib_core]
ib_cq_poll_work+0x18/0x50 [ib_core]
process_one_work+0x20b/0x6a0
worker_thread+0x35/0x380
kthread+0x117/0x130
ret_from_fork+0x24/0x30

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:32 -04:00
Bart Van Assche
17e391dd09 scsi: target: Send unit attention condition even if the sense buffer is too small
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:32 -04:00
Bart Van Assche
89a104ed4f scsi: target: Do not duplicate the code that marks that a command has sense data
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:32 -04:00
Bart Van Assche
799d44d0fa scsi: target/tcm_loop: Avoid that static checkers warn about dead code
The code under the "release:" label can only be reached after se_cmd has
been set to a non-NULL value. Hence remove the if (se_cmd) test.  Keep the
else-part since calling transport_generic_free_cmd() is not necessary for a
command that has not been submitted to the core.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 4d3895d5ea ("target/tcm_loop: Merge struct tcm_loop_cmd and struct tcm_loop_tmr")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:32 -04:00
Bart Van Assche
aa090eabcb scsi: target: Remove second argument from fabric_make_tpg()
Since most target drivers do not use the second fabric_make_tpg() argument
("group") and since it is trivial to derive the group pointer from the wwn
pointer, do not pass the group pointer to fabric_make_tpg().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:32 -04:00
Bart Van Assche
35bea5c84f scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size
Fixes: e48354ce07 ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
ed88f05578 scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers
Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cmd() if a command
has not been aborted, call __iscsit_free_cmd() from inside
lio_release_cmd(). The latter function is namely called for all commands
once the reference count has dropped to zero.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
7b2cc7dc0d scsi: target: Simplify the code for waiting for command completion
Instead of embedding the completion that is used for waiting for command
completion in struct se_cmd, let the context that waits for command
completion allocate it. This makes it possible to have a single code path
for non-aborted and aborted commands in target_release_cmd_kref() and
avoids that transport_generic_free_cmd() has to call
cmd->se_tfo->release_cmd() directly. This patch does not change any
functionality. Note: transport_generic_free_cmd() only waits until the
se_cmd reference count has reached zero after it has set both
CMD_T_FABRIC_STOP and CMD_T_ABORTED.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
edf46eee59 scsi: target: Simplify transport_generic_free_cmd() (2/2)
Since target_wait_free_cmd() skips TMFs with no associated LUN, it is safe
to call that function for such commands. Use this to simplify
transport_generic_free_cmd(). The only functional change in this patch is
that CMD_T_FABRIC_STOP gets set for TMFs with no associated LUN by
transport_generic_free_cmd().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
a8864d861d scsi: target: Simplify transport_generic_free_cmd() (1/2)
Move identical code outside an if/else statement. This patch does not
change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
65422d705f scsi: target: Fold core_tmr_handle_tas_abort() into transport_cmd_finish_abort()
For the two calls to transport_cmd_finish_abort() outside
core_tmr_handle_tas_abort() it is guaranteed that CMD_T_TAS is not set. Use
this property to fold core_tmr_handle_tas_abort() into
transport_cmd_finish_abort(). This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
709d56512f scsi: target: Simplify core_tmr_handle_tas_abort()
The code that can set CMD_T_TAS is executed by the same thread as the
thread that executes core_tmr_handle_tas_abort(). That means that no
locking is needed to check CMD_T_TAS from inside
core_tmr_handle_tas_abort(). This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
953bcf7ad1 scsi: target: Document when CMD_T_STOP and CMD_T_COMPLETE are set
Document those aspects of transport_cmd_check_stop_to_fabric() and
transport_generic_free_cmd() of which it is nontrivial to derive these from
their implementation.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
00d909a107 scsi: target: Make the session shutdown code also wait for commands that are being aborted
Target drivers must call target_sess_cmd_list_set_waiting() and
target_wait_for_sess_cmds() before freeing a session. Since freeing a
session is only safe after all commands that are associated with a session
have finished, make target_wait_for_sess_cmds() also wait for commands that
are being aborted. Instead of setting a flag in each pending command from
target_sess_cmd_list_set_waiting() and waiting in
target_wait_for_sess_cmds() on a per-command completion, only set a
per-session flag in the former function and wait on a per-session
completion in the latter function. This change is safe because once a SCSI
initiator system has submitted a command a target system is always allowed
to execute it to completion. See also commit 0f4a943168 ("target: Fix
remote-port TMR ABORT + se_cmd fabric stop").

This patch is based on the following two patches:

* Bart Van Assche, target: Simplify session shutdown code, February 19, 2015
  (8df5463d7d).

* Christoph Hellwig, target: Rework session shutdown code, December 7, 2015
  (http://thread.gmane.org/gmane.linux.scsi.target.devel/10695).

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
d1bff07f38 scsi: target: Introduce transport_init_session()
Other than initializing xcopy_pt_sess.sess_wait_list, this patch does not
change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
317f89712d scsi: target: Rename transport_init_session() into transport_alloc_session()
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:31 -04:00
Bart Van Assche
3eeff19840 scsi: target: Move a list_del_init() statement
This patch does not change any functionality but makes the next patch
easier to read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:30 -04:00
Bart Van Assche
36d4cb460b scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion
The approach for adding a device to the devices_idr data structure and for
removing it is as follows:

* &dev->dev_group.cg_item is initialized before a device is added to
  devices_idr.

* If the reference count of a device drops to zero then
  target_free_device() removes the device from devices_idr.

* All devices_idr manipulations are protected by device_mutex.

This means that increasing the reference count of a device is sufficient to
prevent removal from devices_idr and also that it is safe access
dev_group.cg_item for any device that is referenced by devices_idr. Use
this to modify target_find_device() and target_for_each_device() such that
these functions no longer introduce a dependency between device_mutex and
the configfs root inode mutex.

Note: it is safe to pass a NULL pointer to config_item_put() and also to
config_item_get_unless_zero().

This patch prevents that lockdep reports the following complaint:

======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc1-dbg+ #1 Not tainted
------------------------------------------------------
rmdir/12053 is trying to acquire lock:
 (device_mutex#2){+.+.+.}, at: [<ffffffffa010afce>]
target_free_device+0xae/0xf0 [target_core_mod]

but task is already holding lock:
 (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
       lock_acquire+0x59/0x80
       down_write+0x36/0x70
       configfs_depend_item+0x3a/0xb0 [configfs]
       target_depend_item+0x13/0x20 [target_core_mod]
       target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod]
       target_devices_idr_iter+0x16/0x20 [target_core_mod]
       idr_for_each+0x39/0xc0
       target_for_each_device+0x36/0x50 [target_core_mod]
       target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod]
       target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod]
       process_one_work+0x1ca/0x3f0
       worker_thread+0x49/0x3b0
       kthread+0x109/0x140
       ret_from_fork+0x31/0x40

-> #0 (device_mutex#2){+.+.+.}:
       __lock_acquire+0x101f/0x11d0
       lock_acquire+0x59/0x80
       __mutex_lock+0x7e/0x950
       mutex_lock_nested+0x16/0x20
       target_free_device+0xae/0xf0 [target_core_mod]
       target_core_dev_release+0x10/0x20 [target_core_mod]
       config_item_put+0x6e/0xb0 [configfs]
       configfs_rmdir+0x1a6/0x300 [configfs]
       vfs_rmdir+0xb7/0x140
       do_rmdir+0x1f4/0x200
       SyS_rmdir+0x11/0x20
       entry_SYSCALL_64_fastpath+0x23/0xc2

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sb->s_type->i_mutex_key#14);
                               lock(device_mutex#2);
                               lock(&sb->s_type->i_mutex_key#14);
  lock(device_mutex#2);

 *** DEADLOCK ***

3 locks held by rmdir/12053:
 #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff811e223f>]
mnt_want_write+0x1f/0x50
 #1:  (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811cb97e>]
do_rmdir+0x15e/0x200
 #2:  (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

stack backtrace:
CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x86/0xcf
 print_circular_bug+0x1c7/0x220
 __lock_acquire+0x101f/0x11d0
 lock_acquire+0x59/0x80
 __mutex_lock+0x7e/0x950
 mutex_lock_nested+0x16/0x20
 target_free_device+0xae/0xf0 [target_core_mod]
 target_core_dev_release+0x10/0x20 [target_core_mod]
 config_item_put+0x6e/0xb0 [configfs]
 configfs_rmdir+0x1a6/0x300 [configfs]
 vfs_rmdir+0xb7/0x140
 do_rmdir+0x1f4/0x200
 SyS_rmdir+0x11/0x20
 entry_SYSCALL_64_fastpath+0x23/0xc2

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
[Rebased to handle conflict withe target_find_device removal]
Signed-off-by: Mike Christie <mchristi@redhat.com>

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:30 -04:00
Bart Van Assche
6f3bf5a2fa scsi: target: Use config_item_name() instead of open-coding it
Some target code uses config_item_name() while other code accesses .ci_name
directly. Make the target code consistent by switching to
config_item_name().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:44:30 -04:00
Mike Christie
0c218e16a8 scsi: tcmu: Don't pass KERN_ERR to pr_err
Fix warning:

smatch warnings:
drivers/target/target_core_user.c:301 tcmu_genl_cmd_done() warn: KERN_*
level not at start of string

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:55:08 -04:00
Mike Christie
e260748437 scsi: target: remove target_find_device
target_find_device is no longer used, so remove it.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:06 -04:00
Mike Christie
bdaeedc1be scsi: tcmu: add module wide block/reset_netlink support
This patch based on Xiubo's patches adds 2 tcmu attr to block and reset the
netlink interface. It's used during userspace daemon reinitialization after
the daemon has crashed while there is outstanding nl requests. The daemon
can block the nl interface, kill outstanding requests in the kernel and
then reopen the netlink socket and unblock it to allow new requests.

[mkp: typo]

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:06 -04:00
Mike Christie
06add777bd scsi: tcmu: misc nl code cleanup
Some misc cleanup of the nl rework patches.

1. Fix space instead of tabs use and extra newline

2. Drop initializing variables to 0 when not needed

3. Just pass the skb_buff and msg_header pointers to
   tcmu_netlink_event_send.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:06 -04:00
Mike Christie
9de3a1ef03 scsi: tcmu: simplify nl interface
Just return EBUSY if a nl request comes in while processing one. The upper
layers do not support sending multiple create/remove requests at the same
time (you cannot have a create and remove at the same time or do multiple
creates or removes at the same time) and doing a reconfig while a
create/remove is still executing does not make sense.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:06 -04:00
Mike Christie
3228691ffe scsi: tcmu: track nl commands
The next patch is going to fix the hung nl command issue so this adds a
list of outstanding nl commands that we can later abort when the daemon is
restarted.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:05 -04:00
Mike Christie
0297e96290 scsi: tcmu: delete unused __wait
When this code changed, this was never cleaned up.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:05 -04:00
Matthew Wilcox
10e9cbb6b5 scsi: target: Convert target drivers to use sbitmap
The sbitmap and the percpu_ida perform essentially the same task,
allocating tags for commands.  The sbitmap outperforms the percpu_ida as
documented here: https://lkml.org/lkml/2014/4/22/553

The sbitmap interface is a little harder to use, but being able to remove
the percpu_ida code and getting better performance justifies the additional
complexity.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>	# f_tcm
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Matthew Wilcox
83c2b54b92 scsi: target: Abstract tag freeing
Introduce target_free_tag() and convert all drivers to use it.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
David Disseldorp
63ce3c384d scsi: target: Fix truncated PR-in ReadKeys response
SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not
altered based on the allocation length, so always calculate and pack the
full key list length even if the list itself is truncated.

According to Maged:

  Yes it fixes the "Storage Spaces Persistent Reservation" test in the
  Windows 2016 Server Failover Cluster validation suites when having
  many connections that result in more than 8 registrations. I tested
  your patch on 4.17 with iblock.

This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test.

Cc: stable@vger.kernel.org
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Maged Mokhtar <mmokhtar@petasan.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 21:36:37 -04:00
Xiubo Li
9554c1be48 scsi: tcmu: remove useless code and clean up the code style.
Since the TCMU_RING_SIZE macro is not using here will discard it and at the
same time clean up the code style.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
bstroesser@ts.fujitsu.com
6c3796d130 scsi: target: tcmu: add read length support
Generally target core and TCMUser seem to work fine for tape devices and
media changers.  But there is at least one situation where TCMUser is not
able to support sequential access device emulation correctly.

The situation is when an initiator sends a SCSI READ CDB with a length that
is greater than the length of the tape block to read. We can distinguish
two subcases:

A) The initiator sent the READ CDB with the SILI bit being set.

   In this case the sequential access device has to transfer the data from
   the tape block (only the length of the tape block) and transmit a good
   status.  The current interface between TCMUser and the userspace does
   not support reduction of the read data size by the userspace program.

   The patch below fixes this subcase by allowing the userspace program to
   specify a reduced data size in read direction.

B) The initiator sent the READ CDB with the SILI bit not being set.

   In this case the sequential access device has to transfer the data from
   the tape block as in A), but additionally has to transmit CHECK
   CONDITION with the ILI bit set and NO SENSE in the sensebytes. The
   information field in the sensebytes must contain the residual count.

   With the below patch a user space program can specify the real read data
   length and appropriate sensebytes.  TCMUser then uses the se_cmd flag
   SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data
   size and the sensebytes.  Note: the flag SCF_TREAT_READ_AS_NORMAL is
   introduced by Lee Duncan's patch "[PATCH v4] target: transport should
   handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700.

Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:02:52 -04:00
Kees Cook
fad953ce0b treewide: Use array_size() in vzalloc()
The vzalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vzalloc(a * b)

with:
        vzalloc(array_size(a, b))

as well as handling cases of:

        vzalloc(a * b * c)

with:

        vzalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vzalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vzalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vzalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vzalloc(C1 * C2 * C3, ...)
|
  vzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vzalloc(C1 * C2, ...)
|
  vzalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook
6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Linus Torvalds
5f85942c2e SCSI misc on 20180610
This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
 xfcp, hisi_sas, cxlflash, qla2xxx.  In the absence of Nic, we're also
 taking target updates which are mostly minor except for the tcmu
 refactor. The only real core change to worry about is the removal of
 high page bouncing (in sas, storvsc and iscsi).  This has been well
 tested and no problems have shown up so far.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWx1pbCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUucAP42pccS
 ziKyiOizuxv9fZ4Q+nXd1A9zhI5tqqpkHjcQegEA40qiZSi3EKGKR8W0UpX7Ntmo
 tqrZJGojx9lnrAM2RbQ=
 =NMXg
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...
2018-06-10 13:01:12 -07:00
Linus Torvalds
f459c34538 for-4.18/block-20180603
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJbFIrHAAoJEPfTWPspceCm2+kQAKo7o7HL30aRxJYu+gYafkuW
 PV47zr3e4vhMDEzDaMsh1+V7I7bm3uS+NZu6cFbcV+N9KXFpeb4V4Hvvm5cs+OC3
 WCOBi4eC1h4qnDQ3ZyySrCMN+KHYJ16pZqddEjqw+fhVudx8i+F+jz3Y4ZMDDc3q
 pArKZvjKh2wEuYXUMFTjaXY46IgPt+er94OwvrhyHk+4AcA+Q/oqSfSdDahUC8jb
 BVR3FV4I3NOHUaru0RbrUko13sVZSboWPCIFrlTDz8xXcJOnVHzdVS1WLFDXLHnB
 O8q9cADCfa4K08kz68RxykcJiNxNvz5ChDaG0KloCFO+q1tzYRoXLsfaxyuUDg57
 Zd93OFZC6hAzXdhclDFIuPET9OQIjDzwphodfKKmDsm3wtyOtydpA0o7JUEongp0
 O1gQsEfYOXmQsXlo8Ot+Z7Ne/HvtGZ91JahUa/59edxQbcKaMrktoyQsQ/d1nOEL
 4kXID18wPcFHWRQHYXyVuw6kbpRtQnh/U2m1eenSZ7tVQHwoe6mF3cfSf5MMseak
 k8nAnmsfEvOL4Ar9ftg61GOrImaQlidxOC2A8fmY5r0Sq/ZldvIFIZizsdTTCcni
 8SOTxcQowyqPf5NvMNQ8cKqqCJap3ppj4m7anZNhbypDIF2TmOWsEcXcMDn4y9on
 fax14DPLo59gBRiPCn5f
 =nga/
 -----END PGP SIGNATURE-----

Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - clean up how we pass around gfp_t and
   blk_mq_req_flags_t (Christoph)

 - prepare us to defer scheduler attach (Christoph)

 - clean up drivers handling of bounce buffers (Christoph)

 - fix timeout handling corner cases (Christoph/Bart/Keith)

 - bcache fixes (Coly)

 - prep work for bcachefs and some block layer optimizations (Kent).

 - convert users of bio_sets to using embedded structs (Kent).

 - fixes for the BFQ io scheduler (Paolo/Davide/Filippo)

 - lightnvm fixes and improvements (Matias, with contributions from Hans
   and Javier)

 - adding discard throttling to blk-wbt (me)

 - sbitmap blk-mq-tag handling (me/Omar/Ming).

 - remove the sparc jsflash block driver, acked by DaveM.

 - Kyber scheduler improvement from Jianchao, making it more friendly
   wrt merging.

 - conversion of symbolic proc permissions to octal, from Joe Perches.
   Previously the block parts were a mix of both.

 - nbd fixes (Josef and Kevin Vigor)

 - unify how we handle the various kinds of timestamps that the block
   core and utility code uses (Omar)

 - three NVMe pull requests from Keith and Christoph, bringing AEN to
   feature completeness, file backed namespaces, cq/sq lock split, and
   various fixes

 - various little fixes and improvements all over the map

* tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits)
  blk-mq: update nr_requests when switching to 'none' scheduler
  block: don't use blocking queue entered for recursive bio submits
  dm-crypt: fix warning in shutdown path
  lightnvm: pblk: take bitmap alloc. out of critical section
  lightnvm: pblk: kick writer on new flush points
  lightnvm: pblk: only try to recover lines with written smeta
  lightnvm: pblk: remove unnecessary bio_get/put
  lightnvm: pblk: add possibility to set write buffer size manually
  lightnvm: fix partial read error path
  lightnvm: proper error handling for pblk_bio_add_pages
  lightnvm: pblk: fix smeta write error path
  lightnvm: pblk: garbage collect lines with failed writes
  lightnvm: pblk: rework write error recovery path
  lightnvm: pblk: remove dead function
  lightnvm: pass flag on graceful teardown to targets
  lightnvm: pblk: check for chunk size before allocating it
  lightnvm: pblk: remove unnecessary argument
  lightnvm: pblk: remove unnecessary indirection
  lightnvm: pblk: return NVM_ error on failed submission
  lightnvm: pblk: warn in case of corrupted write buffer
  ...
2018-06-04 07:58:06 -07:00
Kent Overstreet
a47a28b74a target: convert to bioset_init()/mempool_init()
Convert the target code to embedded bio sets.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30 15:33:32 -06:00
Colin Ian King
c167828088 scsi: target: fix spelling mistake "Uknown" -> "Unknown"
Trivial fix to spelling mistake in pr_err message text.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28 21:32:19 -04:00
Lee Duncan
bd81372065 scsi: target: transport should handle st FM/EOM/ILI reads
When a tape drive is exported via LIO using the pscsi module, a read
that requests more bytes per block than the tape can supply returns an
empty buffer. This is because the pscsi pass-through target module sees
the "ILI" illegal length bit set and thinks there is no reason to return
the data.

This is a long-standing transport issue, since it assumes that no data
need be returned under a check condition, which isn't always the case
for tape.

Add in a check for tape reads with the ILI, EOM, or FM bits set, with a
sense code of NO_SENSE, treating such cases as if the read
succeeded. The layered tape driver then "does the right thing" when it
gets such a response.

Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18 12:22:48 -04:00
Prasanna Kumar Kalever
125966db1f scsi: target: tcmu: fix error resetting qfull_time_out to default
Problem:

$ cat /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out
-1

$ echo "-1" > /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out
-bash: echo: write error: Invalid argument

Fix:

This patch will help reset qfull_time_out to its default
i.e. qfull_time_out=-1.

Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-14 22:44:50 -04:00
Andrei Vagin
769031c92c scsi: target: target/file: Add support of direct and async I/O
There are two advantages:

* Direct I/O allows to avoid the write-back cache, so it reduces affects
  to other processes in the system.
* Async I/O allows to handle a few commands concurrently.

DIO + AIO shows a better perfomance for random write operations:

Mode: O_DSYNC Async: 1
$ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sda --runtime=20 --numjobs=2
  WRITE: bw=45.9MiB/s (48.1MB/s), 21.9MiB/s-23.0MiB/s (22.0MB/s-25.2MB/s), io=919MiB (963MB), run=20002-20020msec

Mode: O_DSYNC Async: 0
$ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sdb --runtime=20 --numjobs=2
  WRITE: bw=1607KiB/s (1645kB/s), 802KiB/s-805KiB/s (821kB/s-824kB/s), io=31.8MiB (33.4MB), run=20280-20295msec

Known issue:

DIF (PI) emulation doesn't work when a target uses async I/O, because
DIF metadata is saved in a separate file, and it is another non-trivial
task how to synchronize writing in two files, so that a following read
operation always returns a consisten metadata for a specified block.

Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-14 22:40:08 -04:00
Kent Overstreet
f4f8154a08 block: Use bioset_init() for fs_bio_set
Minor optimization - remove a pointer indirection when using fs_bio_set.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14 13:16:06 -06:00
Christoph Hellwig
ff005a0662 block: sanitize blk_get_request calling conventions
Switch everyone to blk_get_request_flags, and then rename
blk_get_request_flags to blk_get_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14 08:55:12 -06:00
Zhu Lingshan
33d065ccb3 scsi: tcmu: refactor nl wr_cache attr with new helpers
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
emulate_write_cache in configFS.

Removed tcmu_netlink_event() since we have new netlink
events helpers now.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 01:52:50 -04:00
Zhu Lingshan
84e2850628 scsi: tcmu: refactor nl dev_size attr with new helpers
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_size in configFS.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 01:52:50 -04:00
Zhu Lingshan
02ccfb54ba scsi: tcmu: refactor nl dev_cfg attr with new nl helpers
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_config in configFS.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 01:52:50 -04:00
Zhu Lingshan
f892bd8ec1 scsi: tcmu: refactor rm_device cmd with new nl helpers
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 01:52:50 -04:00
Zhu Lingshan
e0c240ac3a scsi: tcmu: refactor add_device cmd with new nl helpers
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 01:52:49 -04:00
Zhu Lingshan
0e5aee3939 scsi: tcmu: add new netlink events helpers
Add new netlink events helpers tcmu_netlink_event_init() and
tcmu_netlink_event_send(). These new functions intend to replace
existing netlink events helper function tcmu_netlink_event().

The existing function tcmu_netlink_event() works well for events like
TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink
attribute. But if there is a command requires more than one attributes
to send out, we have to use a struct to adapt the paremeter
reconfig_data, it is hard to use one struct or a union in one struct to
adapt every command with different attributes, it may get long and ugly.

With the new two functions, we can call tcmu_netlink_event_init() to
initialize a netlink event, then add all attributes we need by using
nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So
that we don't need to use a long struct or union if we want to send
mulitple attributes for different commands.

[mkp: typos]

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 01:52:49 -04:00
Bryant G Ly
f5957dade4 scsi: target: Fix fortify_panic kernel exception
memcmp() requires the two buffers passed as arguments to be at least
'size' bytes long, otherwise a fortify_panic will trigger.

Use memchr_inv() instead of memcmp() to determine whether the received
payload is zeroed or not.

The bug was found by running a block backstore via LIO.

[  496.212958] Call Trace:
[  496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable)
[  496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock]
[  496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod]
[  496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis]
[  496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod]
[  496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod]
[  496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod]
[  496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod]
[  496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis]
[  496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580
[  496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600
[  496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0
[  496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4

[mkp: tweaked commit message]

Fixes: 2237498f0b ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Tested-by: Taylor Jakobson <tjakobs@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:24:01 -04:00
Randy Dunlap
572ccdab50 scsi: target: target_core_user.[ch]: convert comments into DOC:
Make documentation on target-supported userspace-I/O design be
usable by kernel-doc by using "DOC:". This is used in the driver-api
Documentation chapter.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:14:39 -04:00
Randy Dunlap
9ad97b8b40 scsi: target: target_core_transport.c: enable+fix kernel-doc
For exported functions that already have near-kernel-doc notation,
fix them to begin with "/**" and make a few corrections so that they
don't have any kernel-doc warnings.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:14:38 -04:00
Randy Dunlap
1e74aff12d scsi: target: target_core_transport.c: fix kernel-doc warnings
Correct a function parameter's name to eliminate kernel-doc warnings
in drivers/target/target_core_transport.c.

Fixes these kernel-doc warnings: (tested by adding these files to a new
target.rst documentation file)

../drivers/target/target_core_transport.c:1671: warning: No description found for parameter 'fabric_tmr_ptr'
../drivers/target/target_core_transport.c:1671: warning: Excess function parameter 'fabric_context' description in 'target_submit_tmr'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:14:38 -04:00
Souptick Joarder
69589c9bb9 scsi: target: Change return type to vm_fault_t
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19 00:49:37 -04:00
Lee Duncan
78a6295c71 scsi: target: prefer dbroot of /etc/target over /var/target
The target database root directory, dbroot, has defaulted to /var/target
for a while, but its main client, targetcli-fb, has been moving it to
/etc/target for quite some time. With the plethora of target drivers now
appearing, it has become more difficult to initialize this attribute
before use by any child drivers.

If the directory /etc/target exists, use that as the DB root. Otherwise,
fall back to using /var/target.

The ability to override this dbroot attribute still exists via sysfs.

Signed-off-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19 00:47:02 -04:00
Ming Lei
8e1ceafe50 scsi: target: fix crash with iscsi target and dvd
When the current page can't be added to bio, one new bio should be
created for adding this page again, instead of ignoring this page.

This patch fixes kernel crash with iscsi target and dvd, as reported by
Wakko.

Cc: Wakko Warner <wakko@animx.eu.org>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: target-devel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 84c8590646 ("target: avoid accessing .bi_vcnt directly")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19 00:41:03 -04:00
Linus Torvalds
3526dd0c78 for-4.17/block-20180402
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJawr05AAoJEPfTWPspceCmT2UP/1uuaqwzyl4VjFNb/k7KS7UM
 +Cs/1HBlGomgMA8orDTGqtWqLRdR3z4RSh0+MvXTzQ78HpFVYz7CbDc9itHm+G9M
 X0ypD4kF/JGCFb5cxk+x6qv28uO2nv4DP3+0hHqJWLH4UVJBWDY6bs4BPShsf9QB
 I6XjioNMhoqylXgdOITLODJZz+TcChlJMDAqwhpJwh9TH1wjobleAZ6AdmCPfgi5
 h0UCKMUKzcVJlNZwQUrzrs2cxcx9Uhunnbz7HK0ZV4n/FKFtDpGynFpQQ71pZxKe
 Be0ZOBPCQvC3ykOM/egCIvC/e5y7FgrjORD6jxyu1PTwAugI5E1VYSMxHkXvgPAx
 zOo9A7RT4GPO2tDQv+DbzNFpqeSAclTgSmr+/y1wmheBs8DiSt7MPVBiNM4zdCNv
 NLk9z7IEjFhdmluSB/LbTb1aokypMb/q7QTLouPHdwGn80k7yrhFyLHgdjpNTQ2K
 UHfHZvGxkOX6SmFhBNOtIFUkuSceenh64a0RkRle7filx+ImpbCVm2/GYi9zZNCu
 EtctgzLbLmz40zMiyDaZS2bxBgGzfn6yf4xd9LsaAJPMhvZnmXogT0D9ctWXB0WU
 mMaS7sOkLnNjnGkzF1fHkeiZ/oigrstJbe+CA7BtOdwxpWn6MZBgKEoFQ6iA2b3X
 5J1axMgVH5LAsIEcEQVq
 =RVhK
 -----END PGP SIGNATURE-----

Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "It's a pretty quiet round this time, which is nice. This contains:

   - series from Bart, cleaning up the way we set/test/clear atomic
     queue flags.

   - series from Bart, fixing races between gendisk and queue
     registration and removal.

   - set of bcache fixes and improvements from various folks, by way of
     Michael Lyle.

   - set of lightnvm updates from Matias, most of it being the 1.2 to
     2.0 transition.

   - removal of unused DIO flags from Nikolay.

   - blk-mq/sbitmap memory ordering fixes from Omar.

   - divide-by-zero fix for BFQ from Paolo.

   - minor documentation patches from Randy.

   - timeout fix from Tejun.

   - Alpha "can't write a char atomically" fix from Mikulas.

   - set of NVMe fixes by way of Keith.

   - bsg and bsg-lib improvements from Christoph.

   - a few sed-opal fixes from Jonas.

   - cdrom check-disk-change deadlock fix from Maurizio.

   - various little fixes, comment fixes, etc from various folks"

* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
  blk-mq: Directly schedule q->timeout_work when aborting a request
  blktrace: fix comment in blktrace_api.h
  lightnvm: remove function name in strings
  lightnvm: pblk: remove some unnecessary NULL checks
  lightnvm: pblk: don't recover unwritten lines
  lightnvm: pblk: implement 2.0 support
  lightnvm: pblk: implement get log report chunk
  lightnvm: pblk: rename ppaf* to addrf*
  lightnvm: pblk: check for supported version
  lightnvm: implement get log report chunk helpers
  lightnvm: make address conversions depend on generic device
  lightnvm: add support for 2.0 address format
  lightnvm: normalize geometry nomenclature
  lightnvm: complete geo structure with maxoc*
  lightnvm: add shorten OCSSD version in geo
  lightnvm: add minor version to generic geometry
  lightnvm: simplify geometry structure
  lightnvm: pblk: refactor init/exit sequences
  lightnvm: Avoid validation of default op value
  lightnvm: centralize permission check for lightnvm ioctl
  ...
2018-04-05 14:27:02 -07:00
Sagi Grimberg
7bfca0cfe6 iscsi-target: use common inet_addr_is_any
Instead of open-coding it.

Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: target-devel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26 08:53:43 -06:00
Bart Van Assche
bf3a2b310e target/tcm_loop: Use blk_queue_flag_set()
Use blk_queue_flag_set() instead of open-coding this function.

Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08 14:13:48 -07:00
Denys Vlasenko
9b2c45d479 net: make getname() functions return length rather than use int* parameter
Changes since v1:
Added changes in these files:
    drivers/infiniband/hw/usnic/usnic_transport.c
    drivers/staging/lustre/lnet/lnet/lib-socket.c
    drivers/target/iscsi/iscsi_target_login.c
    drivers/vhost/net.c
    fs/dlm/lowcomms.c
    fs/ocfs2/cluster/tcp.c
    security/tomoyo/network.c

Before:
All these functions either return a negative error indicator,
or store length of sockaddr into "int *socklen" parameter
and return zero on success.

"int *socklen" parameter is awkward. For example, if caller does not
care, it still needs to provide on-stack storage for the value
it does not need.

None of the many FOO_getname() functions of various protocols
ever used old value of *socklen. They always just overwrite it.

This change drops this parameter, and makes all these functions, on success,
return length of sockaddr. It's always >= 0 and can be differentiated
from an error.

Tests in callers are changed from "if (err)" to "if (err < 0)", where needed.

rpc_sockname() lost "int buflen" parameter, since its only use was
to be passed to kernel_getsockname() as &buflen and subsequently
not used in any way.

Userspace API is not changed.

    text    data     bss      dec     hex filename
30108430 2633624  873672 33615726 200ef6e vmlinux.before.o
30108109 2633612  873672 33615393 200ee21 vmlinux.o

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: David S. Miller <davem@davemloft.net>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-decnet-user@lists.sourceforge.net
CC: linux-wireless@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: linux-sctp@vger.kernel.org
CC: linux-nfs@vger.kernel.org
CC: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12 14:15:04 -05:00
Linus Torvalds
858f45bff3 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights include:

   - numerous target-core-user improvements related to queue full and
     timeout handling. (MNC)

   - prevent target-core-user corruption when invalid data page is
     requested. (MNC)

   - add target-core device action configfs attributes to allow
     user-space to trigger events separate from existing attributes
     exposed to end-users. (MNC)

   - fix iscsi-target NULL pointer dereference 4.6+ regression in CHAP
     error path. (David Disseldorp)

   - avoid target-core backend UNMAP callbacks if range is zero. (Andrei
     Vagin)

   - fix a iscsi-target 4.14+ regression related multiple PDU logins,
     that was exposed due to removal of TCP prequeue support. (Florian
     Westphal + MNC)

  Also, there is a iser-target bug still being worked on for post -rc1
  code to address a long standing issue resulting in persistent
  ib_post_send() failures, for RNICs with small max_send_sge"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits)
  iscsi-target: make sure to wake up sleeping login worker
  tcmu: Fix trailing semicolon
  tcmu: fix cmd user after free
  target: fix destroy device in target_configure_device
  tcmu: allow userspace to reset ring
  target core: add device action configfs files
  tcmu: fix error return code in tcmu_configure_device()
  target_core_user: add cmd id to broken ring message
  target: add SAM_STAT_BUSY sense reason
  tcmu: prevent corruption when invalid data page requested
  target: don't call an unmap callback if a range length is zero
  target/iscsi: avoid NULL dereference in CHAP auth error path
  cxgbit: call neigh_event_send() to update MAC address
  target: tcm_loop: Use seq_puts() in tcm_loop_show_info()
  target: tcm_loop: Delete an unnecessary return statement in tcm_loop_submission_work()
  target: tcm_loop: Delete two unnecessary variable initialisations in tcm_loop_issue_tmr()
  target: tcm_loop: Combine substrings for 26 messages
  target: tcm_loop: Improve a size determination in two functions
  target: tcm_loop: Delete an error message for a failed memory allocation in four functions
  sbp-target: Delete an error message for a failed memory allocation in three functions
  ...
2018-02-09 14:49:46 -08:00
Linus Torvalds
0a4b6e2f80 Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
 "This is the main pull request for block IO related changes for the
  4.16 kernel. Nothing major in this pull request, but a good amount of
  improvements and fixes all over the map. This contains:

   - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
     Paolo.

   - Support for SMR zones for deadline and mq-deadline from Damien and
     Christoph.

   - Set of fixes for bcache by way of Michael Lyle, including fixes
     from himself, Kent, Rui, Tang, and Coly.

   - Series from Matias for lightnvm with fixes from Hans Holmberg,
     Javier, and Matias. Mostly centered around pblk, and the removing
     rrpc 1.2 in preparation for supporting 2.0.

   - A couple of NVMe pull requests from Christoph. Nothing major in
     here, just fixes and cleanups, and support for command tracing from
     Johannes.

   - Support for blk-throttle for tracking reads and writes separately.
     From Joseph Qi. A few cleanups/fixes also for blk-throttle from
     Weiping.

   - Series from Mike Snitzer that enables dm to register its queue more
     logically, something that's alwways been problematic on dm since
     it's a stacked device.

   - Series from Ming cleaning up some of the bio accessor use, in
     preparation for supporting multipage bvecs.

   - Various fixes from Ming closing up holes around queue mapping and
     quiescing.

   - BSD partition fix from Richard Narron, fixing a problem where we
     can't mount newer (10/11) FreeBSD partitions.

   - Series from Tejun reworking blk-mq timeout handling. The previous
     scheme relied on atomic bits, but it had races where we would think
     a request had timed out if it to reused at the wrong time.

   - null_blk now supports faking timeouts, to enable us to better
     exercise and test that functionality separately. From me.

   - Kill the separate atomic poll bit in the request struct. After
     this, we don't use the atomic bits on blk-mq anymore at all. From
     me.

   - sgl_alloc/free helpers from Bart.

   - Heavily contended tag case scalability improvement from me.

   - Various little fixes and cleanups from Arnd, Bart, Corentin,
     Douglas, Eryu, Goldwyn, and myself"

* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
  block: remove smart1,2.h
  nvme: add tracepoint for nvme_complete_rq
  nvme: add tracepoint for nvme_setup_cmd
  nvme-pci: introduce RECONNECTING state to mark initializing procedure
  nvme-rdma: remove redundant boolean for inline_data
  nvme: don't free uuid pointer before printing it
  nvme-pci: Suspend queues after deleting them
  bsg: use pr_debug instead of hand crafted macros
  blk-mq-debugfs: don't allow write on attributes with seq_operations set
  nvme-pci: Fix queue double allocations
  block: Set BIO_TRACE_COMPLETION on new bio during split
  blk-throttle: use queue_is_rq_based
  block: Remove kblockd_schedule_delayed_work{,_on}()
  blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
  blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
  lib/scatterlist: Fix chaining support in sgl_alloc_order()
  blk-throttle: track read and write request individually
  block: add bdev_read_only() checks to common helpers
  block: fail op_is_write() requests to read-only partitions
  blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
  ...
2018-01-29 11:51:49 -08:00
Florian Westphal
1c130ae00b iscsi-target: make sure to wake up sleeping login worker
Mike Christie reports:
  Starting in 4.14 iscsi logins will fail around 50% of the time.

Problem appears to be that iscsi_target_sk_data_ready() callback may
return without doing anything in case it finds the login work queue
is still blocked in sock_recvmsg().

Nicholas Bellinger says:
  It would indicate users providing their own ->sk_data_ready() callback
  must be responsible for waking up a kthread context blocked on
  sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is
  received before the first sock_recvmsg(..., MSG_WAITALL) completes.

So, do this and invoke the original data_ready() callback -- in
case of tcp sockets this takes care of waking the thread.

Disclaimer: I do not understand why this problem did not show up before
tcp prequeue removal.

(Drop WARN_ON usage - nab)

Reported-by: Mike Christie <mchristi@redhat.com>
Bisected-by: Mike Christie <mchristi@redhat.com>
Tested-by: Mike Christie <mchristi@redhat.com>
Diagnosed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fixes: e7942d0633 ("tcp: remove prequeue support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-23 23:03:54 -08:00
Bart Van Assche
8c7a8d1c4b lib/scatterlist: Fix chaining support in sgl_alloc_order()
This patch avoids that workloads with large block sizes (megabytes)
can trigger the following call stack with the ib_srpt driver (that
driver is the only driver that chains scatterlists allocated by
sgl_alloc_order()):

BUG: Bad page state in process kworker/0:1H  pfn:2423a78
page:fffffb03d08e9e00 count:-3 mapcount:0 mapping:          (null) index:0x0
flags: 0x57ffffc0000000()
raw: 0057ffffc0000000 0000000000000000 0000000000000000 fffffffdffffffff
raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
page dumped because: nonzero _count
CPU: 0 PID: 733 Comm: kworker/0:1H Tainted: G          I      4.15.0-rc7.bart+ #1
Hardware name: HP ProLiant DL380 G7, BIOS P67 08/16/2015
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Call Trace:
 dump_stack+0x5c/0x83
 bad_page+0xf5/0x10f
 get_page_from_freelist+0xa46/0x11b0
 __alloc_pages_nodemask+0x103/0x290
 sgl_alloc_order+0x101/0x180
 target_alloc_sgl+0x2c/0x40 [target_core_mod]
 srpt_alloc_rw_ctxs+0x173/0x2d0 [ib_srpt]
 srpt_handle_new_iu+0x61e/0x7f0 [ib_srpt]
 __ib_process_cq+0x55/0xa0 [ib_core]
 ib_cq_poll_work+0x1b/0x60 [ib_core]
 process_one_work+0x141/0x340
 worker_thread+0x47/0x3e0
 kthread+0xf5/0x130
 ret_from_fork+0x1f/0x30

Fixes: e80a0af475 ("lib/scatterlist: Introduce sgl_alloc() and sgl_free()")
Reported-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-19 12:31:03 -07:00
Luis de Bethencourt
85fae482a9 tcmu: Fix trailing semicolon
The trailing semicolon is an empty statement that does no operation.
It is completely stripped out by the compiler. Removing it since it doesn't do
anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-18 01:21:24 -08:00
Mike Christie
45dc488c0e tcmu: fix cmd user after free
If we are failing the command due to a qfull timeout we are
also freeing the tcmu command, so we cannot access it later
to get the se_cmd.

Note: The clearing of cmd->se_cmd is not needed. We do not check
it later for something like determining if the command was failed
due to a timeout. As a result I am dropping it.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-18 01:21:23 -08:00
tangwenji
c82b59e7c3 target: fix destroy device in target_configure_device
After dev->transport->configure_device succeeds, target_configure_device
exits abnormally, dev_flags has not set DF_CONFIGURED yet, does not call
destroy_device function in free_device.

Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-18 01:21:11 -08:00
Mike Christie
892782caf1 tcmu: allow userspace to reset ring
This patch adds 2 tcmu attrs to block/unblock a device and
reset the ring buffer. They are used when the userspace
daemon has crashed or forced to shutdown while IO is executing.
On restart, the daemon can block the device so new IO is not
sent to userspace while it puts the ring in a clean state.

Notes: The reset ring opreation is specific to tcmu, but the
block one could be generic. I kept it tcmu specific, because
it requires some extra locking/state checks in the main IO
path and since other backend modules did not need this
functionality I thought only tcmu should take the perf hit.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-16 18:05:04 -08:00
Mike Christie
8dc31ff929 target core: add device action configfs files
This patch adds a new group of files that are to be used to
have the kernel module execution some action. The next patch
will have target_core_user use the group/files to be able to block
a device and to reset its memory buffer used to pass commands
between user/kernel space.

This type of file is different from the existing device attributes
in that they may be write only and when written to they result in
the kernel module executing some function. These need to be
separate from the normal device attributes which get/set device
values so userspace can continue to loop over all the attribs and
get/set them during initialization.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-16 18:05:04 -08:00
Wei Yongjun
a24e7917e1 tcmu: fix error return code in tcmu_configure_device()
Fix to return error code -ENOMEM from the kzalloc() error handling
case instead of 0, as done elsewhere in this function.

Fixes: 80eb876 ("tcmu: allow max block and global max blocks to be settable")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 21:17:35 -08:00
Mike Christie
88cf107325 target_core_user: add cmd id to broken ring message
Log cmd id that was not found in the tcmu_handle_completions
lookup failure path.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:30 -08:00
Mike Christie
d120c7083f target: add SAM_STAT_BUSY sense reason
Add SAM_STAT_BUSY sense_reason. The next patch will have
target_core_user return this value while it is temporarily
blocked and restarting.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:30 -08:00
Mike Christie
c1c390ba53 tcmu: prevent corruption when invalid data page requested
We will always have a page mapped for cmd data if it is
valid command. If the mapping does not exist then something
bad happened in userspace and it should not proceed. This
has us return VM_FAULT_SIGBUS when this happens instead of
returning a freshly allocated paged. The latter can cause
corruption because userspace might write the pages data
overwriting valid data or return it to the initiator.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:29 -08:00
Andrei Vagin
9960f85181 target: don't call an unmap callback if a range length is zero
If a length of a range is zero, it means there is nothing to unmap
and we can skip this range.

Here is one more reason, why we have to skip such ranges.  An unmap
callback calls file_operations->fallocate(), but the man page for the
fallocate syscall says that fallocate(fd, mode, offset, let) returns
EINVAL, if len is zero. It means that file_operations->fallocate() isn't
obligated to handle zero ranges too.

Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:28 -08:00
David Disseldorp
ce512d79d0 target/iscsi: avoid NULL dereference in CHAP auth error path
If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then
crypto_free_shash() is called with a NULL pointer which gets
dereferenced in crypto_shash_tfm().

Fixes: 69110e3ced ("iscsi-target: Use shash and ahash")
Suggested-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Cc: stable@vger.kernel.org # 4.6+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:27 -08:00
Varun Prakash
093ec1430f cxgbit: call neigh_event_send() to update MAC address
If nud_state is not valid then call neigh_event_send() to update MAC
address.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:26 -08:00
Markus Elfring
09f99a3dfa target: tcm_loop: Use seq_puts() in tcm_loop_show_info()
The script "checkpatch.pl" pointed information out like the following.

WARNING: Prefer seq_puts to seq_printf

Thus fix the affected source code place.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:26 -08:00
Markus Elfring
2dfe3511ce target: tcm_loop: Delete an unnecessary return statement in tcm_loop_submission_work()
The script "checkpatch.pl" pointed information out like the following.

WARNING: void function return statements are not generally useful

Thus remove such a statement in the affected function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:25 -08:00
Markus Elfring
7deeceb4c7 target: tcm_loop: Delete two unnecessary variable initialisations in tcm_loop_issue_tmr()
The variables "se_cmd" and "tl_cmd" will eventually be set to appropriate
pointers a bit later.
Thus omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:24 -08:00
Markus Elfring
c8d1f4b76b target: tcm_loop: Combine substrings for 26 messages
The script "checkpatch.pl" pointed information out like the following.

WARNING: quoted string split across lines

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:23 -08:00
Markus Elfring
a572dba9e0 target: tcm_loop: Improve a size determination in two functions
Replace the specification of data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:23 -08:00
Markus Elfring
cd3fb32a72 target: tcm_loop: Delete an error message for a failed memory allocation in four functions
Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:22 -08:00
Markus Elfring
e0f3d4c23e sbp-target: Delete an error message for a failed memory allocation in three functions
Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Chris Boot <bootc@boo.tc>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:21 -08:00
Mike Christie
80eb876138 tcmu: allow max block and global max blocks to be settable
Users might have a physical system to a target so they could
have a lot more than 2 gigs of memory they want to devote to
tcmu. OTOH, we could be running in a vm and so a 2 gig
global and 1 gig per dev limit might be too high. This patch
allows the user to specify the limits.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:20 -08:00
Mike Christie
9103575ae3 tcmu: make ring buffer timer configurable
This adds a timer, qfull_time_out, that controls how long a
device will wait for ring buffer space to open before
failing the commands in the queue. It is useful to separate
this timer from the cmd_time_out and default 30 sec one,
because for HA setups cmd_time_out may be disbled and 30
seconds is too long to wait when some OSs like ESX will
timeout commands after as little as 8 - 15 seconds.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:19 -08:00
Mike Christie
af1dd7ff46 tcmu: don't block submitting context for block waits
This patch has tcmu internally queue cmds if its ring buffer
is full. It also makes the TCMU_GLOBAL_MAX_BLOCKS limit a
hint instead of a hard limit, so we do not have to add any
new locks/atomics in the main IO path except when IO is not
running.

This fixes the following bugs:

1. We cannot sleep from the submitting context because it might be
called from a target recv context. This results in transport level
commands timing out. For example if the ring is full, we would
sleep, and a iscsi initiator would send a iscsi ping/nop which
times out because the target's recv thread is sleeping here.

2. Devices were not fairly scheduled to run when they hit the global
limit so they could time out waiting for ring space while others
got run.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:19 -08:00
Mike Christie
f890f5799a tcmu: simplify dbi thresh handling
We do not really save a lot by trying to increase thresh
a multiple of the existing value. This just simplifies the
code by increasing it to whatever is needed for the command
being executed.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:18 -08:00
Mike Christie
6fd0ce7972 tcmu: prep queue_cmd_ring to be used by unmap wq
In the next patches we will call queue_cmd_ring from the submitting
context and also the completion path. This changes the queue_cmd_ring
return code so in the next patches we can return a sense_reason_t
and also signal if a command was requeued.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:17 -08:00
Xiubo Li
3e60913579 tcmu: clean up the scatter helper
Add some comments to make the scatter code to be more readable,
and drop unused arg to new_iov.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:16 -08:00
Mike Christie
3c0f26ff9d tcmu: fix free block calculation
The blocks_left calculation does not account for free blocks
between 0 and thresh, so we could be queueing/waiting when
there are enough blocks free.

This has us add in the blocks between 0 and thresh as well as
at the end from thresh to DATA_BLOCK_BITS.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:16 -08:00
Mike Christie
1a1fc0b88e tcmu: simplify scatter_data_area error handling
scatter_data_area always returns 0, so stop checking
for errors.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:15 -08:00
Mike Christie
810b8153c4 tcmu: release blocks for partially setup cmds
If we cannot setup a cmd because we run out of ring space
or global pages release the blocks before sleeping. This
prevents a deadlock where dev0 has waiting_blocks set and
needs N blocks, but dev1 to devX have each allocated N / X blocks
and also hit the global block limit so they went to sleep.

find_free_blocks is not able to take the sleeping dev's
blocks becaause their waiting_blocks is set and even
if it was not the block returned by find_last_bit could equal
dbi_max. The latter will probably never happen because
DATA_BLOCK_BITS is so high but in the next patches
DATA_BLOCK_BITS and TCMU_GLOBAL_MAX_BLOCKS will be settable so
it might be lower and could happen.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:14 -08:00
Mike Christie
6fddcb7754 tcmu: remove commands_lock
No need for the commands_lock. The cmdr_lock is already held during
idr addition and deletion, so just grab it during traversal.

Note: This also fixes a issue where we should have been using at
least _bh locking in tcmu_handle_completions when taking the commands
lock to prevent the case where tcmu_handle_completions could be
interrupted by a timer softirq while the commands_lock is held.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:13 -08:00
Mike Christie
488ebe4c35 tcmu: move expired command completion to unmap thread
This moves the expired command completion handling to
the unmap wq, so the next patch can use a mutex
in tcmu_check_expired_cmd.

Note:
tcmu_device_timedout's use of spin_lock_irq was not needed.
The commands_lock is used between thread context (tcmu_queue_cmd_ring
and tcmu_irqcontrol (even though this is named irqcontrol it is not
run in irq context)) and timer/bh context. In the timer/bh context
bhs are disabled, so you need to use the _bh lock calls from the
thread context callers.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:13 -08:00
Mike Christie
9972cebb59 tcmu: fix unmap thread race
If the unmap thread has already run find_free_blocks
but not yet run prepare_to_wait when a wake_up(&unmap_wait)
call is done, the unmap thread is going to miss the wake
call. Instead of adding checks for if new waiters were added
this just has us use a work queue which will run us again
in this type of case.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:12 -08:00
Mike Christie
89ec9cfd3b tcmu: split unmap_thread_fn
Separate unmap_thread_fn to make it easier to read.

Note: this patch does not fix the bug where we might
miss a wake up call. The next patch will fix that.
This patch only separates the code into functions.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:11 -08:00
Mike Christie
bf99ec1332 tcmu: merge common block release code
Have unmap_thread_fn use tcmu_blocks_release.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:10 -08:00
tangwenji
26d2b3106f tcmu: fix page addr in tcmu_flush_dcache_range
The page addr should be update.

Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:10 -08:00
Rasmus Villemoes
094bb5d766 target-core: don't use "const char*" for a buffer that is written to
iscsi_parse_pr_out_transport_id launders the const away via a call to
strstr(), and then modifies the buffer (writing a nul byte) through
the return value. It's cleaner to be honest and simply declare the
parameter as "char*", fixing up the call chain, and allowing us to
drop the cast in the return statement.

Amusingly, the two current callers found it necessary to cast a
non-const pointer to a const.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12 15:07:09 -08:00
Bart Van Assche
14db491726 target: Use sgl_alloc_order() and sgl_free()
Use the sgl_alloc_order() and sgl_free() functions instead of open
coding these functions.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00
Jens Axboe
0abc2a1038 block: fix blk_rq_append_bio
Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio)
moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider
the fact that the bounced bio becomes invisible to caller since the
parameter type is 'struct bio *'. Make it a pointer to a pointer to
a bio, so the caller sees the right bio also after a bounce.

Fixes: caa4b02476 ("blk-map: call blk_queue_bounce from blk_rq_append_bio")
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Michele Ballabio <barra_cuda@katamail.com>
(handling failure of blk_rq_append_bio(), only call bio_get() after
blk_rq_append_bio() returns OK)
Tested-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18 13:55:43 -07:00
Linus Torvalds
844056fd74 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:

 - The final conversion of timer wheel timers to timer_setup().

   A few manual conversions and a large coccinelle assisted sweep and
   the removal of the old initialization mechanisms and the related
   code.

 - Remove the now unused VSYSCALL update code

 - Fix permissions of /proc/timer_list. I still need to get rid of that
   file completely

 - Rename a misnomed clocksource function and remove a stale declaration

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  m68k/macboing: Fix missed timer callback assignment
  treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
  timer: Remove redundant __setup_timer*() macros
  timer: Pass function down to initialization routines
  timer: Remove unused data arguments from macros
  timer: Switch callback prototype to take struct timer_list * argument
  timer: Pass timer_list pointer to callbacks unconditionally
  Coccinelle: Remove setup_timer.cocci
  timer: Remove setup_*timer() interface
  timer: Remove init_timer() interface
  treewide: setup_timer() -> timer_setup() (2 field)
  treewide: setup_timer() -> timer_setup()
  treewide: init_timer() -> setup_timer()
  treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
  s390: cmm: Convert timers to use timer_setup()
  lightnvm: Convert timers to use timer_setup()
  drivers/net: cris: Convert timers to use timer_setup()
  drm/vc4: Convert timers to use timer_setup()
  block/laptop_mode: Convert timers to use timer_setup()
  net/atm/mpc: Avoid open-coded assignment of timer callback function
  ...
2017-11-25 08:37:16 -10:00
Linus Torvalds
eda5d47134 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:

 "This series is predominantly bug-fixes, with a few small improvements
  that have been outstanding over the last release cycle.

  As usual, the associated bug-fixes have CC' tags for stable.

  Also, things have been particularly quiet wrt new developments the
  last months, with most folks continuing to focus on stability atop 4.x
  stable kernels for their respective production configurations.

  Also at this point, the stable trees have been synced up with
  mainline. This will continue to be a priority, as production users
  tend to run exclusively atop stable kernels, a few releases behind
  mainline.

  The highlights include:

   - Fix PR PREEMPT_AND_ABORT null pointer dereference regression in
     v4.11+ (tangwenji)

   - Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu)

   - Add netlink command reply supported option for each device (Kenjiro
     Nakayama)

   - cxgbit: Abort the TCP connection in case of data out timeout (Varun
     Prakash)

   - Fix PR/ALUA file path truncation (David Disseldorp)

   - Fix double se_cmd completion during ->cmd_time_out (Mike Christie)

   - Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly +
     nab)

   - Fix quiese during transport_write_pending_qf endless loop (nab)

   - Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+
     (Don White + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits)
  tcmu: Add a missing unlock on an error path
  tcmu: Fix some memory corruption
  iscsi-target: Fix non-immediate TMR reference leak
  iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
  target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
  target: Fix quiese during transport_write_pending_qf endless loop
  target: Fix caw_sem leak in transport_generic_request_failure
  target: Fix QUEUE_FULL + SCSI task attribute handling
  iSCSI-target: Use common error handling code in iscsi_decode_text_input()
  target/iscsi: Detect conn_cmd_list corruption early
  target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
  target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype
  target/iscsi: Fix endianness in an error message
  target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it
  target/iscsi: Define OFFLOAD_BUF_SIZE once
  target: Inline transport_put_cmd()
  target: Suppress gcc 7 fallthrough warnings
  target: Move a declaration of a global variable into a header file
  tcmu: fix double se_cmd completion
  target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES
  ...
2017-11-24 19:19:20 -10:00
Kees Cook
e99e88a9d2 treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:07 -08:00
Linus Torvalds
abc36be236 A couple of configfs cleanups:
- proper use of the bool type (Thomas Meyer)
   - constification of struct config_item_type (Bhumika Goyal)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSTALHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNxfhAAv3cunxiEPEAvs+1xuGd3cZYaxz7qinvIODPxIKoF
 kRWiuy5PUklRMnJ8seOgJ1p1QokX6Sk4cZ8HcctDJVByqODjOq4K5eaKVN1ZqJoz
 BUzO/gOqfs64r9yaFIlKfe8nFA+gpUftSeWyv3lThxAIJ1iSbue7OZ/A10tTOS1m
 RWp9FPepFv+nJMfWqeQU64BsoDQ4kgZ2NcEA+jFxNx5dlmIbLD49tk0lfddvZQXr
 j5WyAH73iugilLtNUGVOqSzHBY4kUvfCKUV7leirCegyMoGhFtA87m6Wzwbo6ZUI
 DwQLzWvuPaGv1P2PpNEHfKiNbfIEp75DRyyyf87DD3lc5ffAxQSm28mGuwcr7Rn5
 Ow/yWL6ERMzCLExoCzEkXYJISy7T5LIzYDgNggKMpeWxysAduF7Onx7KfW1bTuhK
 mHvY7iOXCjEvaIVaF8uMKE6zvuY1vCMRXaJ+kC9jcIE3gwhg+2hmQvrdJ2uAFXY+
 rkeF2Poj/JlblPU4IKWAjiPUbzB7Lv0gkypCB2pD4riaYIN5qCAgF8ULIGQp2hsO
 lYW1EEgp5FBop85oSO/HAGWeH9dFg0WaV7WqNRVv0AGXhKjgy+bVd7iYPpvs7mGw
 z9IqSQDORcG2ETLcFhZgiJpCk/itwqXBD+wgMOjJPP8lL+4kZ8FcuhtY9kc9WlJE
 Tew=
 =+tMO
 -----END PGP SIGNATURE-----

Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs

Pull configfs updates from Christoph Hellwig:
 "A couple of configfs cleanups:

   - proper use of the bool type (Thomas Meyer)

   - constification of struct config_item_type (Bhumika Goyal)"

* tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs:
  RDMA/cma: make config_item_type const
  stm class: make config_item_type const
  ACPI: configfs: make config_item_type const
  nvmet: make config_item_type const
  usb: gadget: configfs: make config_item_type const
  PCI: endpoint: make config_item_type const
  iio: make function argument and some structures const
  usb: gadget: make config_item_type structures const
  dlm: make config_item_type const
  netconsole: make config_item_type const
  nullb: make config_item_type const
  ocfs2/cluster: make config_item_type const
  target: make config_item_type const
  configfs: make ci_type field, some pointers and function arguments const
  configfs: make config_item_type const
  configfs: Fix bool initialization/comparison
2017-11-14 14:44:04 -08:00
Linus Torvalds
2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Dan Carpenter
97488c7319 tcmu: Add a missing unlock on an error path
We added a new error path here but we forgot to drop the lock first
before returning.

Fixes: 0d44374c1a ("tcmu: fix double se_cmd completion")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08 01:42:35 -08:00
Dan Carpenter
16b9327704 tcmu: Fix some memory corruption
"udev->nl_reply_supported" is an int but on 64 bit arches we are writing
8 bytes of data to it so it corrupts four bytes beyond the end of the
struct.

Fixes: b849b45675 ("target: Add netlink command reply supported option for each device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08 01:42:31 -08:00
Nicholas Bellinger
3fc9fb13a4 iscsi-target: Fix non-immediate TMR reference leak
This patch fixes a se_cmd->cmd_kref reference leak that can
occur when a non immediate TMR is proceeded our of command
sequence number order, and CMDSN_LOWER_THAN_EXP is returned
by iscsit_sequence_cmd().

To address this bug, call target_put_sess_cmd() during this
special case following what iscsit_process_scsi_cmd() does
upon CMDSN_LOWER_THAN_EXP.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07 19:51:24 -08:00
Nicholas Bellinger
ae072726f6 iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
Since commit 59b6986dbf fixed a potential NULL pointer dereference
by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the
se_tmr_req is currently leaked by iscsit_free_cmd() because no
iscsi_cmd->se_cmd.se_tfo was associated.

To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other
TMR and call transport_init_se_cmd() + target_get_sess_cmd() to
setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2.

This will ensure normal release operation once se_cmd->cmd_kref
reaches zero and target_release_cmd_kref() is invoked, se_tmr_req
will be released via existing target_free_cmd_mem() and
core_tmr_release_req() code.

Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07 19:51:23 -08:00
Nicholas Bellinger
1c21a48055 target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
This patch fixes bug where early se_cmd exceptions that occur
before backend execution can result in use-after-free if/when
a subsequent ABORT_TASK occurs for the same tag.

Since an early se_cmd exception will have had se_cmd added to
se_session->sess_cmd_list via target_get_sess_cmd(), it will
not have CMD_T_COMPLETE set by the usual target_complete_cmd()
backend completion path.

This causes a subsequent ABORT_TASK + __target_check_io_state()
to signal ABORT_TASK should proceed.  As core_tmr_abort_task()
executes, it will bring the outstanding se_cmd->cmd_kref count
down to zero releasing se_cmd, after se_cmd has already been
queued with error status into fabric driver response path code.

To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is
set at target_get_sess_cmd() time, and cleared immediately before
backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE
is set.

Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to
determine when an early exception has occured, and avoid aborting
this se_cmd since it will have already been queued into fabric
driver response path code.

Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07 19:50:24 -08:00
Nicholas Bellinger
9574a497df target: Fix quiese during transport_write_pending_qf endless loop
This patch fixes a potential end-less loop during QUEUE_FULL,
where cmd->se_tfo->write_pending() callback fails repeatedly
but __transport_wait_for_tasks() has already been invoked to
quiese the outstanding se_cmd descriptor.

To address this bug, this patch adds a CMD_T_STOP|CMD_T_ABORTED
check within transport_write_pending_qf() and invokes the
existing se_cmd->t_transport_stop_comp to signal quiese
completion back to __transport_wait_for_tasks().

Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07 19:45:28 -08:00
Nicholas Bellinger
fd2f928b0d target: Fix caw_sem leak in transport_generic_request_failure
With the recent addition of transport_check_aborted_status() within
transport_generic_request_failure() to avoid sending a SCSI status
exception after CMD_T_ABORTED w/ TAS=1 has occured, it introduced
a COMPARE_AND_WRITE early failure regression.

Namely when COMPARE_AND_WRITE fails and se_device->caw_sem has
been taken by sbc_compare_and_write(), if the new check for
transport_check_aborted_status() returns true and exits,
cmd->transport_complete_callback() -> compare_and_write_post()
is skipped never releasing se_device->caw_sem.

This regression was originally introduced by:

  commit e3b88ee95b
  Author: Bart Van Assche <bart.vanassche@sandisk.com>
  Date:   Tue Feb 14 16:25:45 2017 -0800

      target: Fix handling of aborted failed commands

To address this bug, move the transport_check_aborted_status()
call after transport_complete_task_attr() and
cmd->transport_complete_callback().

Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07 19:43:55 -08:00
Nicholas Bellinger
1c79df1f34 target: Fix QUEUE_FULL + SCSI task attribute handling
This patch fixes a bug during QUEUE_FULL where transport_complete_qf()
calls transport_complete_task_attr() after it's already been invoked
by target_complete_ok_work() or transport_generic_request_failure()
during initial completion, preceeding QUEUE_FULL.

This will result in se_device->simple_cmds, se_device->dev_cur_ordered_id
and/or se_device->dev_ordered_sync being updated multiple times for
a single se_cmd.

To address this bug, clear SCF_TASK_ATTR_SET after the first call
to transport_complete_task_attr(), and avoid updating SCSI task
attribute related counters for any subsequent calls.

Also, when a se_cmd is deferred due to ordered tags and executed
via target_restart_delayed_cmds(), set CMD_T_SENT before execution
matching what target_execute_cmd() does.

Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07 19:41:37 -08:00
Ingo Molnar
8c5db92a70 Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts:
	include/linux/compiler-clang.h
	include/linux/compiler-gcc.h
	include/linux/compiler-intel.h
	include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:32:44 +01:00
Markus Elfring
17c45b9006 iSCSI-target: Use common error handling code in iscsi_decode_text_input()
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-04 15:17:49 -07:00
Bart Van Assche
6eaf69e4ec target/iscsi: Detect conn_cmd_list corruption early
Certain behavior of the initiator can cause the target driver to
send both a reject and a SCSI response. If that happens two
target_put_sess_cmd() calls will occur without the command having
been removed from conn_cmd_list. In other words, conn_cmd_list
will get corrupted once the freed memory is reused. Although the
Linux kernel can detect list corruption if list debugging is
enabled, in this case the context in which list corruption is
detected is not related to the context that caused list corruption.
Hence add WARN_ON() statements that report the context that is
causing list corruption.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-04 15:16:10 -07:00