Commit Graph

30587 Commits

Author SHA1 Message Date
Gao feng
fb10f802b0 tcp_memcg: remove useless var old_lim
nobody needs it. remove.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23 14:46:21 -08:00
Herbert Xu
b8ee93ba80 gro: Clean up tcpX_gro_receive checksum verification
This patch simplifies the checksum verification in tcpX_gro_receive
by reusing the CHECKSUM_COMPLETE code for CHECKSUM_NONE.  All it
does for CHECKSUM_NONE is compute the partial checksum and then
treat it as if it came from the hardware (CHECKSUM_COMPLETE).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Cheers,
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23 14:46:19 -08:00
Herbert Xu
cc5c00bbb4 gro: Only verify TCP checksums for candidates
In some cases we may receive IP packets that are longer than
their stated lengths.  Such packets are never merged in GRO.
However, we may end up computing their checksums incorrectly
and end up allowing packets with a bogus checksum enter our
stack with the checksum status set as verified.

Since such packets are rare and not performance-critical, this
patch simply skips the checksum verification for them.

Reported-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>

Thanks,
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23 14:46:19 -08:00
Chang Xiangzhong
d6c4161485 net: sctp: find the correct highest_new_tsn in sack
Function sctp_check_transmitted(transport t, ...) would iterate all of
transport->transmitted queue and looking for the highest __newly__ acked tsn.
The original algorithm would depend on the order of the assoc->transport_list
(in function sctp_outq_sack line 1215 - 1226). The result might not be the
expected due to the order of the tranport_list.

Solution: checking if the exising is smaller than the new one before assigning

Signed-off-by: Chang Xiangzhong <changxiangzhong@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23 14:46:18 -08:00
Linus Torvalds
d2c2ad54c4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar
    Karwar.

 2) skb_segment() can choke on packets using frag lists, fix from
    Herbert Xu with help from Eric Dumazet and others.

 3) IPv4 output cached route instantiation properly handles races
    involving two threads trying to install the same route, but we
    forgot to propagate this logic to input routes as well.  Fix from
    Alexei Starovoitov.

 4) Put protections in place to make sure that recvmsg() paths never
    accidently copy uninitialized memory back into userspace and also
    make sure that we never try to use more that sockaddr_storage for
    building the on-kernel-stack copy of a sockaddr.  Fixes from Hannes
    Frederic Sowa.

 5) R8152 driver transmit flow bug fixes from Hayes Wang.

 6) Fix some minor fallouts from genetlink changes, from Johannes Berg
    and Michael Opdenacker.

 7) AF_PACKET sendmsg path can race with netdevice unregister notifier,
    fix by using RCU to make sure the network device doesn't go away
    from under us.  Fix from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  gso: handle new frag_list of frags GRO packets
  genetlink: fix genl_set_err() group ID
  genetlink: fix genlmsg_multicast() bug
  packet: fix use after free race in send path when dev is released
  xen-netback: stop the VIF thread before unbinding IRQs
  wimax: remove dead code
  net/phy: Add the autocross feature for forced links on VSC82x4
  net/phy: Add VSC8662 support
  net/phy: Add VSC8574 support
  net/phy: Add VSC8234 support
  net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
  net: rework recvmsg handler msg_name and msg_namelen logic
  bridge: flush br's address entry in fdb when remove the
  net: core: Always propagate flag changes to interfaces
  ipv4: fix race in concurrent ip_route_input_slow()
  r8152: fix incorrect type in assignment
  r8152: support stopping/waking tx queue
  r8152: modify the tx flow
  r8152: fix tx/rx memory overflow
  netfilter: ebt_ip6: fix source and destination matching
  ...
2013-11-22 09:57:35 -08:00
Yuanhan Liu
044c8d4b15 kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS cleanly
Remove CONFIG_USE_GENERIC_SMP_HELPERS left by commit 0a06ff068f
("kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS").

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-21 16:42:27 -08:00
Herbert Xu
9d8506cc2d gso: handle new frag_list of frags GRO packets
Recently GRO started generating packets with frag_lists of frags.
This was not handled by GSO, thus leading to a crash.

Thankfully these packets are of a regular form and are easy to
handle.  This patch handles them in two ways.  For completely
non-linear frag_list entries, we simply continue to iterate over
the frag_list frags once we exhaust the normal frags.  For frag_list
entries with linear parts, we call pskb_trim on the first part
of the frag_list skb, and then process the rest of the frags in
the usual way.

This patch also kills a chunk of dead frag_list code that has
obviously never ever been run since it ends up generating a bogus
GSO-segmented packet with a frag_list entry.

Future work is planned to split super big packets into TSO
ones.

Fixes: 8a29111c7c ("net: gro: allow to build full sized skb")
Reported-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Reported-by: Jerry Chu <hkchu@google.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 14:11:50 -05:00
Johannes Berg
220815a966 genetlink: fix genlmsg_multicast() bug
Unfortunately, I introduced a tremendously stupid bug into
genlmsg_multicast() when doing all those multicast group
changes: it adjusts the group number, but then passes it
to genlmsg_multicast_netns() which does that again.

Somehow, my tests failed to catch this, so add a warning
into genlmsg_multicast_netns() and remove the offending
group ID adjustment.

Also add a warning to the similar code in other functions
so people who misuse them are more loudly warned.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 13:09:43 -05:00
Daniel Borkmann
e40526cb20 packet: fix use after free race in send path when dev is released
Salam reported a use after free bug in PF_PACKET that occurs when
we're sending out frames on a socket bound device and suddenly the
net device is being unregistered. It appears that commit 827d9780
introduced a possible race condition between {t,}packet_snd() and
packet_notifier(). In the case of a bound socket, packet_notifier()
can drop the last reference to the net_device and {t,}packet_snd()
might end up suddenly sending a packet over a freed net_device.

To avoid reverting 827d9780 and thus introducing a performance
regression compared to the current state of things, we decided to
hold a cached RCU protected pointer to the net device and maintain
it on write side via bind spin_lock protected register_prot_hook()
and __unregister_prot_hook() calls.

In {t,}packet_snd() path, we access this pointer under rcu_read_lock
through packet_cached_dev_get() that holds reference to the device
to prevent it from being freed through packet_notifier() while
we're in send path. This is okay to do as dev_put()/dev_hold() are
per-cpu counters, so this should not be a performance issue. Also,
the code simplifies a bit as we don't need need_rls_dev anymore.

Fixes: 827d978037 ("af-packet: Use existing netdev reference for bound sockets.")
Reported-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Cc: Ben Greear <greearb@candelatech.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 13:09:43 -05:00
Michael Opdenacker
aec6f90d41 wimax: remove dead code
This removes a code line that is between a "return 0;" and an error label.
This code line can never be reached.

Found by Coverity (CID: 1130529)

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 13:09:42 -05:00
David S. Miller
78ef359cb6 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
pull request: wireless 2013-11-21

Please pull this batch of fixes intended for the 3.13 stream!

For the Bluetooth bits, Gustavo says:

"A few fixes for 3.13. There is 3 fixes to the RFCOMM protocol. One
crash fix to L2CAP. A simple fix to a bad behaviour in the SMP
protocol."

On top of that...

Amitkumar Karwar sends a quintet of mwifiex fixes -- two fixes related
to failure handling, two memory leak fixes, and a NULL pointer fix.

Felix Fietkau corrects and earlier rt2x00 HT descriptor handling fix
to address a crash.

Geyslan G. Bem fixes a memory leak in brcmfmac.

Larry Finger address more pointer arithmetic errors in rtlwifi.

Luis R. Rodriguez provides a regulatory fix in the shared ath code.

Sujith Manoharan brings a couple ath9k initialization fixes.

Ujjal Roy offers one more mwifiex fix to avoid invalid memory accesses
when unloading the USB driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 12:58:51 -05:00
David S. Miller
cd2cc01b67 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
netfilter fixes for net

The following patchset contains fixes for your net tree, they are:

* Remove extra quote from connlimit configuration in Kconfig, from
  Randy Dunlap.

* Fix missing mss option in syn packets sent to the backend in our
  new synproxy target, from Martin Topholm.

* Use window scale announced by client when sending the forged
  syn to the backend, from Martin Topholm.

* Fix IPv6 address comparison in ebtables, from Luís Fernando
  Cornachioni Estrozi.

* Fix wrong endianess in sequence adjustment which breaks helpers
  in NAT configurations, from Phil Oester.

* Fix the error path handling of nft_compat, from me.

* Make sure the global conntrack counter is decremented after the
  object has been released, also from me.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 12:44:15 -05:00
John W. Linville
7acd71879c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-11-21 10:26:17 -05:00
Hannes Frederic Sowa
68c6beb373 net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
In that case it is probable that kernel code overwrote part of the
stack. So we should bail out loudly here.

The BUG_ON may be removed in future if we are sure all protocols are
conformant.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 21:52:30 -05:00
Hannes Frederic Sowa
f3d3342602 net: rework recvmsg handler msg_name and msg_namelen logic
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller <davem@davemloft.net>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 21:52:30 -05:00
Linus Torvalds
b5898cd057 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs bits and pieces from Al Viro:
 "Assorted bits that got missed in the first pull request + fixes for a
  couple of coredump regressions"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fold try_to_ascend() into the sole remaining caller
  dcache.c: get rid of pointless macros
  take read_seqbegin_or_lock() and friends to seqlock.h
  consolidate simple ->d_delete() instances
  gfs2: endianness misannotations
  dump_emit(): use __kernel_write(), not vfs_write()
  dump_align(): fix the dumb braino
2013-11-20 14:25:39 -08:00
Linus Torvalds
e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
Ding Tianhong
f873042093 bridge: flush br's address entry in fdb when remove the
bridge dev

When the following commands are executed:

brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridge

The calltrace will occur:

[  563.312114] device eth1 left promiscuous mode
[  563.312188] br0: port 1(eth1) entered disabled state
[  563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects
[  563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G           O 3.12.0-0.7-default+ #9
[  563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  563.468200]  0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8
[  563.468204]  ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8
[  563.468206]  ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78
[  563.468209] Call Trace:
[  563.468218]  [<ffffffff814d1c92>] dump_stack+0x6a/0x78
[  563.468234]  [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100
[  563.468242]  [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge]
[  563.468247]  [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge]
[  563.468254]  [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0
[  563.468259]  [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b
[  570.377958] Bridge firewalling registered

--------------------------- cut here -------------------------------

The reason is that when the bridge dev's address is changed, the
br_fdb_change_mac_address() will add new address in fdb, but when
the bridge was removed, the address entry in the fdb did not free,
the bridge_fdb_cache still has objects when destroy the cache, Fix
this by flushing the bridge address entry when removing the bridge.

v2: according to the Toshiaki Makita and Vlad's suggestion, I only
    delete the vlan0 entry, it still have a leak here if the vlan id
    is other number, so I need to call fdb_delete_by_port(br, NULL, 1)
    to flush all entries whose dst is NULL for the bridge.

Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 15:31:11 -05:00
Vlad Yasevich
d2615bf450 net: core: Always propagate flag changes to interfaces
The following commit:
    b6c40d68ff
    net: only invoke dev->change_rx_flags when device is UP

tried to fix a problem with VLAN devices and promiscuouse flag setting.
The issue was that VLAN device was setting a flag on an interface that
was down, thus resulting in bad promiscuity count.
This commit blocked flag propagation to any device that is currently
down.

A later commit:
    deede2fabe
    vlan: Don't propagate flag changes on down interfaces

fixed VLAN code to only propagate flags when the VLAN interface is up,
thus fixing the same issue as above, only localized to VLAN.

The problem we have now is that if we have create a complex stack
involving multiple software devices like bridges, bonds, and vlans,
then it is possible that the flags would not propagate properly to
the physical devices.  A simple examle of the scenario is the
following:

  eth0----> bond0 ----> bridge0 ---> vlan50

If bond0 or eth0 happen to be down at the time bond0 is added to
the bridge, then eth0 will never have promisc mode set which is
currently required for operation as part of the bridge.  As a
result, packets with vlan50 will be dropped by the interface.

The only 2 devices that implement the special flag handling are
VLAN and DSA and they both have required code to prevent incorrect
flag propagation.  As a result we can remove the generic solution
introduced in b6c40d68ff and leave
it to the individual devices to decide whether they will block
flag propagation or not.

Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Suggested-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 15:29:56 -05:00
Alexei Starovoitov
dcdfdf56b4 ipv4: fix race in concurrent ip_route_input_slow()
CPUs can ask for local route via ip_route_input_noref() concurrently.
if nh_rth_input is not cached yet, CPUs will proceed to allocate
equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input
via rt_cache_route()
Most of the time they succeed, but on occasion the following two lines:
	orig = *p;
	prev = cmpxchg(p, orig, rt);
in rt_cache_route() do race and one of the cpus fails to complete cmpxchg.
But ip_route_input_slow() doesn't check the return code of rt_cache_route(),
so dst is leaking. dst_destroy() is never called and 'lo' device
refcnt doesn't go to zero, which can be seen in the logs as:
	unregister_netdevice: waiting for lo to become free. Usage count = 1
Adding mdelay() between above two lines makes it easily reproducible.
Fix it similar to nh_pcpu_rth_output case.

Fixes: d2d68ba9fe ("ipv4: Cache input routes in fib_info nexthops.")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 15:28:44 -05:00
Linus Torvalds
1ee2dcc224 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Mostly these are fixes for fallout due to merge window changes, as
  well as cures for problems that have been with us for a much longer
  period of time"

 1) Johannes Berg noticed two major deficiencies in our genetlink
    registration.  Some genetlink protocols we passing in constant
    counts for their ops array rather than something like
    ARRAY_SIZE(ops) or similar.  Also, some genetlink protocols were
    using fixed IDs for their multicast groups.

    We have to retain these fixed IDs to keep existing userland tools
    working, but reserve them so that other multicast groups used by
    other protocols can not possibly conflict.

    In dealing with these two problems, we actually now use less state
    management for genetlink operations and multicast groups.

 2) When configuring interface hardware timestamping, fix several
    drivers that simply do not validate that the hwtstamp_config value
    is one the driver actually supports.  From Ben Hutchings.

 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar.

 4) In dev_forward_skb(), set the skb->protocol in the right order
    relative to skb_scrub_packet().  From Alexei Starovoitov.

 5) Bridge erroneously fails to use the proper wrapper functions to make
    calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid.  Fix from Toshiaki
    Makita.

 6) When detaching a bridge port, make sure to flush all VLAN IDs to
    prevent them from leaking, also from Toshiaki Makita.

 7) Put in a compromise for TCP Small Queues so that deep queued devices
    that delay TX reclaim non-trivially don't have such a performance
    decrease.  One particularly problematic area is 802.11 AMPDU in
    wireless.  From Eric Dumazet.

 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts
    here.  Fix from Eric Dumzaet, reported by Dave Jones.

 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn.

10) When computing mergeable buffer sizes, virtio-net fails to take the
    virtio-net header into account.  From Michael Dalton.

11) Fix seqlock deadlock in ip4_datagram_connect() wrt.  statistic
    bumping, this one has been with us for a while.  From Eric Dumazet.

12) Fix NULL deref in the new TIPC fragmentation handling, from Erik
    Hugne.

13) 6lowpan bit used for traffic classification was wrong, from Jukka
    Rissanen.

14) macvlan has the same issue as normal vlans did wrt.  propagating LRO
    disabling down to the real device, fix it the same way.  From Michal
    Kubecek.

15) CPSW driver needs to soft reset all slaves during suspend, from
    Daniel Mack.

16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet.

17) The xen-netfront RX buffer refill timer isn't properly scheduled on
    partial RX allocation success, from Ma JieYue.

18) When ipv6 ping protocol support was added, the AF_INET6 protocol
    initialization cleanup path on failure was borked a little.  Fix
    from Vlad Yasevich.

19) If a socket disconnects during a read/recvmsg/recvfrom/etc that
    blocks we can do the wrong thing with the msg_name we write back to
    userspace.  From Hannes Frederic Sowa.  There is another fix in the
    works from Hannes which will prevent future problems of this nature.

20) Fix route leak in VTI tunnel transmit, from Fan Du.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  genetlink: make multicast groups const, prevent abuse
  genetlink: pass family to functions using groups
  genetlink: add and use genl_set_err()
  genetlink: remove family pointer from genl_multicast_group
  genetlink: remove genl_unregister_mc_group()
  hsr: don't call genl_unregister_mc_group()
  quota/genetlink: use proper genetlink multicast APIs
  drop_monitor/genetlink: use proper genetlink multicast APIs
  genetlink: only pass array to genl_register_family_with_ops()
  tcp: don't update snd_nxt, when a socket is switched from repair mode
  atm: idt77252: fix dev refcnt leak
  xfrm: Release dst if this dst is improper for vti tunnel
  netlink: fix documentation typo in netlink_set_err()
  be2net: Delete secondary unicast MAC addresses during be_close
  be2net: Fix unconditional enabling of Rx interface options
  net, virtio_net: replace the magic value
  ping: prevent NULL pointer dereference on write to msg_name
  bnx2x: Prevent "timeout waiting for state X"
  bnx2x: prevent CFC attention
  bnx2x: Prevent panic during DMAE timeout
  ...
2013-11-19 15:50:47 -08:00
Johannes Berg
2a94fe48f3 genetlink: make multicast groups const, prevent abuse
Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg
68eb55031d genetlink: pass family to functions using groups
This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg
62b68e99fa genetlink: add and use genl_set_err()
Add a static inline to generic netlink to wrap netlink_set_err()
to make it easier to use here - use it in openvswitch (the only
generic netlink user of netlink_set_err()).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg
c2ebb90846 genetlink: remove family pointer from genl_multicast_group
There's no reason to have the family pointer there since it
can just be passed internally where needed, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg
06fb555a27 genetlink: remove genl_unregister_mc_group()
There are no users of this API remaining, and we'll soon
change group registration to be static (like ops are now)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg
03ed382746 hsr: don't call genl_unregister_mc_group()
There's no need to unregister the multicast group if the
generic netlink family is registered immediately after.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg
2ecf7536b2 quota/genetlink: use proper genetlink multicast APIs
The quota code is abusing the genetlink API and is using
its family ID as the multicast group ID, which is invalid
and may belong to somebody else (and likely will.)

Make the quota code use the correct API, but since this
is already used as-is by userspace, reserve a family ID
for this code and also reserve that group ID to not break
userspace assumptions.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Johannes Berg
e5dcecba01 drop_monitor/genetlink: use proper genetlink multicast APIs
The drop monitor code is abusing the genetlink API and is
statically using the generic netlink multicast group 1, even
if that group belongs to somebody else (which it invariably
will, since it's not reserved.)

Make the drop monitor code use the proper APIs to reserve a
group ID, but also reserve the group id 1 in generic netlink
code to preserve the userspace API. Since drop monitor can
be a module, don't clear the bit for it on unregistration.

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Johannes Berg
c53ed74236 genetlink: only pass array to genl_register_family_with_ops()
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Andrey Vagin
dbde497966 tcp: don't update snd_nxt, when a socket is switched from repair mode
snd_nxt must be updated synchronously with sk_send_head.  Otherwise
tp->packets_out may be updated incorrectly, what may bring a kernel panic.

Here is a kernel panic from my host.
[  103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[  103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150
...
[  146.301158] Call Trace:
[  146.301158]  [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0

Before this panic a tcp socket was restored. This socket had sent and
unsent data in the write queue. Sent data was restored in repair mode,
then the socket was switched from reapair mode and unsent data was
restored. After that the socket was switched back into repair mode.

In that moment we had a socket where write queue looks like this:
snd_una    snd_nxt   write_seq
   |_________|________|
             |
	  sk_send_head

After a second switching from repair mode the state of socket was
changed:

snd_una          snd_nxt, write_seq
   |_________ ________|
             |
	  sk_send_head

This state is inconsistent, because snd_nxt and sk_send_head are not
synchronized.

Bellow you can find a call trace, how packets_out can be incremented
twice for one skb, if snd_nxt and sk_send_head are not synchronized.
In this case packets_out will be always positive, even when
sk_write_queue is empty.

tcp_write_wakeup
	skb = tcp_send_head(sk);
	tcp_fragment
		if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq))
			tcp_adjust_pcount(sk, skb, diff);
	tcp_event_new_data_sent
		tp->packets_out += tcp_skb_pcount(skb);

I think update of snd_nxt isn't required, when a socket is switched from
repair mode.  Because it's initialized in tcp_connect_init. Then when a
write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent,
so it's always is in consistent state.

I have checked, that the bug is not reproduced with this patch and
all tests about restoring tcp connections work fine.

Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:14:20 -05:00
fan.du
236c9f8486 xfrm: Release dst if this dst is improper for vti tunnel
After searching rt by the vti tunnel dst/src parameter,
if this rt has neither attached to any transformation
nor the transformation is not tunnel oriented, this rt
should be released back to ip layer.

otherwise causing dst memory leakage.

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 15:50:57 -05:00
Johannes Berg
840e93f2ee netlink: fix documentation typo in netlink_set_err()
The parameter is just 'group', not 'groups', fix the documentation typo.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 15:07:01 -05:00
Ben Hutchings
fd468c74bd net_tstamp: Add SIOCGHWTSTAMP ioctl to match SIOCSHWTSTAMP
SIOCSHWTSTAMP returns the real configuration to the application
using it, but there is currently no way for any other
application to find out the configuration non-destructively.
Add a new ioctl for this, making it unprivileged.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-19 19:07:21 +00:00
Luís Fernando Cornachioni Estrozi
acab78b996 netfilter: ebt_ip6: fix source and destination matching
This bug was introduced on commit 0898f99a2. This just recovers two
checks that existed before as suggested by Bart De Schuymer.

Signed-off-by: Luís Fernando Cornachioni Estrozi <lestrozi@uolinc.com>
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-19 15:33:29 +01:00
Ben Hutchings
590d4693fb net/compat: Merge multiple implementations of ifreq::ifr_data conversion
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-18 23:50:13 +00:00
Ben Hutchings
417c3522b3 net/compat: Fix minor information leak in siocdevprivate_ioctl()
We don't need to check that ifr_data itself is a valid user pointer,
but we should check &ifr_data is.  Thankfully the copy of ifr_name is
checked, so this can only leak a few bytes from immediately above the
user address limit.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-18 23:50:12 +00:00
Hannes Frederic Sowa
cf970c002d ping: prevent NULL pointer dereference on write to msg_name
A plain read() on a socket does set msg->msg_name to NULL. So check for
NULL pointer first.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18 16:02:03 -05:00
Vlad Yasevich
eca42aaf89 ipv6: Fix inet6_init() cleanup order
Commit 6d0bfe2261
	net: ipv6: Add IPv6 support to the ping socket

introduced a change in the cleanup logic of inet6_init and
has a bug in that ipv6_packet_cleanup() may not be called.
Fix the cleanup ordering.

CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Lorenzo Colitti <lorenzo@google.com>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18 15:38:46 -05:00
Johannes Berg
029b234fb3 genetlink: rename shadowed variable
Sparse pointed out that the new flags variable I had added
shadowed an existing one, rename the new one to avoid that,
making the code clearer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18 15:34:00 -05:00
Hannes Frederic Sowa
bceaa90240 inet: prevent leakage of uninitialized memory to user in recv syscalls
Only update *addr_len when we actually fill in sockaddr, otherwise we
can return uninitialized memory from the stack to the caller in the
recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL)
checks because we only get called with a valid addr_len pointer either
from sock_common_recvmsg or inet_recvmsg.

If a blocking read waits on a socket which is concurrently shut down we
now return zero and set msg_msgnamelen to 0.

Reported-by: mpb <mpb.mail@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18 15:12:03 -05:00
Fabio Estevam
bcd081a3ae net: ipv6: ndisc: Fix warning when CONFIG_SYSCTL=n
When CONFIG_SYSCTL=n the following build warning happens:

net/ipv6/ndisc.c:1730:1: warning: label 'out' defined but not used [-Wunused-label]

The 'out' label is only used when CONFIG_SYSCTL=y, so move it inside the
'ifdef CONFIG_SYSCTL' block.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18 14:49:16 -05:00
Pablo Neira Ayuso
0c3c6c00c6 netfilter: nf_conntrack: decrement global counter after object release
nf_conntrack_free() decrements our counter (net->ct.count)
before releasing the conntrack object. That counter is used in the
nf_conntrack_cleanup_net_list path to check if it's time to
kmem_cache_destroy our cache of conntrack objects. I think we have
a race there that should be easier to trigger (although still hard)
with CONFIG_DEBUG_OBJECTS_FREE as object releases become slowier
according to the following splat:

[ 1136.321305] WARNING: CPU: 2 PID: 2483 at lib/debugobjects.c:260
debug_print_object+0x83/0xa0()
[ 1136.321311] ODEBUG: free active (active state 0) object type:
timer_list hint: delayed_work_timer_fn+0x0/0x20
...
[ 1136.321390] Call Trace:
[ 1136.321398]  [<ffffffff8160d4a2>] dump_stack+0x45/0x56
[ 1136.321405]  [<ffffffff810514e8>] warn_slowpath_common+0x78/0xa0
[ 1136.321410]  [<ffffffff81051557>] warn_slowpath_fmt+0x47/0x50
[ 1136.321414]  [<ffffffff812f8883>] debug_print_object+0x83/0xa0
[ 1136.321420]  [<ffffffff8106aa90>] ? execute_in_process_context+0x90/0x90
[ 1136.321424]  [<ffffffff812f99fb>] debug_check_no_obj_freed+0x20b/0x250
[ 1136.321429]  [<ffffffff8112e7f2>] ? kmem_cache_destroy+0x92/0x100
[ 1136.321433]  [<ffffffff8115d945>] kmem_cache_free+0x125/0x210
[ 1136.321436]  [<ffffffff8112e7f2>] kmem_cache_destroy+0x92/0x100
[ 1136.321443]  [<ffffffffa046b806>] nf_conntrack_cleanup_net_list+0x126/0x160 [nf_conntrack]
[ 1136.321449]  [<ffffffffa046c43d>] nf_conntrack_pernet_exit+0x6d/0x80 [nf_conntrack]
[ 1136.321453]  [<ffffffff81511cc3>] ops_exit_list.isra.3+0x53/0x60
[ 1136.321457]  [<ffffffff815124f0>] cleanup_net+0x100/0x1b0
[ 1136.321460]  [<ffffffff8106b31e>] process_one_work+0x18e/0x430
[ 1136.321463]  [<ffffffff8106bf49>] worker_thread+0x119/0x390
[ 1136.321467]  [<ffffffff8106be30>] ? manage_workers.isra.23+0x2a0/0x2a0
[ 1136.321470]  [<ffffffff8107210b>] kthread+0xbb/0xc0
[ 1136.321472]  [<ffffffff81072050>] ? kthread_create_on_node+0x110/0x110
[ 1136.321477]  [<ffffffff8161b8fc>] ret_from_fork+0x7c/0xb0
[ 1136.321479]  [<ffffffff81072050>] ? kthread_create_on_node+0x110/0x110
[ 1136.321481] ---[ end trace 25f53c192da70825 ]---

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-18 14:07:19 +01:00
Pablo Neira Ayuso
8691a9a338 netfilter: nft_compat: fix error path in nft_parse_compat()
The patch 0ca743a559: "netfilter: nf_tables: add compatibility
layer for x_tables", leads to the following Smatch

 warning: "net/netfilter/nft_compat.c:140 nft_parse_compat()
          warn: signedness bug returning '(-34)'"

This nft_parse_compat function returns error codes but the return
type is u8 so the error codes are transformed into small positive
values. The callers don't check the return.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-18 12:53:41 +01:00
Phil Oester
23dfe136e2 netfilter: fix wrong byte order in nf_ct_seqadj_set internal information
In commit 41d73ec053, sequence number adjustments were moved to a
separate file. Unfortunately, the sequence numbers that are stored
in the nf_ct_seqadj structure are expressed in host byte order. The
necessary ntohl call was removed when the call to adjust_tcp_sequence
was collapsed into nf_ct_seqadj_set. This broke the FTP NAT helper.
Fix it by adding back the byte order conversions.

Reported-by: Dawid Stawiarski <dawid.stawiarski@netart.pl>
Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-18 12:53:40 +01:00
Martin Topholm
c1898c4c29 netfilter: synproxy: correct wscale option passing
Timestamp are used to store additional syncookie parameters such as sack,
ecn, and wscale. The wscale value we need to encode is the client's
wscale, since we can't recover that later in the session. Next overwrite
the wscale option so the later synproxy_send_client_synack will send
the backend's wscale to the client.

Signed-off-by: Martin Topholm <mph@one.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-18 12:53:38 +01:00
Martin Topholm
a6441b7a39 netfilter: synproxy: send mss option to backend
When the synproxy_parse_options is called on the client ack the mss
option will not be present. Consequently mss wont be included in the
backend syn packet, which falls back to 536 bytes mss.

Therefore XT_SYNPROXY_OPT_MSS is explicitly flagged when recovering mss
value from cookie.

Signed-off-by: Martin Topholm <mph@one.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-18 12:53:36 +01:00
Linus Torvalds
673fdfe3f0 NFS client bugfixes:
- Stable fix for data corruption when retransmitting O_DIRECT writes
 - Stable fix for a deep recursion/stack overflow bug in rpc_release_client
 - Stable fix for infinite looping when mounting a NFSv4.x volume
 - Fix a typo in the nfs mount option parser
 - Allow pNFS layouts to be compiled into the kernel when NFSv4.1 is
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSh95hAAoJEGcL54qWCgDy1wgP/1zc4C7sMBQFWpIo676MHT4n
 m5v4bWgYhRBC0dne5GG8dC4+Q2cPkua4H7cWHCJKQmMuDmbzgOB33RVyQdwU/YNp
 ItLIZLz2EySCKo8OOKvbf4l5jDFeoBYEbheB2bmcE42BgixaTbiHKXpgCtoHr5pT
 qOX0JI29QtstAY3heiLW52bA3OqNJGwfE595KKEHXZwcD0n8izjqOU7Vrqj0E8/Q
 S+Xw9a613fo7chzbdcugR+iW6kkr7qtjxXiI5OXvplGyHycbBJRfvAqHkg01Z69k
 At9Y43cTEFiEx/zfKflmiFkn+IF9xFhABYNCKvpTtLFvQkwJDfYHa6h2jrFac/87
 mTRZHIzJ0nghhE1VxOEjA2zvIE3Hd5Xk4By+2BKJaB/Tp0RPbSsHs7t0s8t7RdHi
 ZwP/bNDynZY3S+HlbMor3A3900bUXLQBpCpRt/0+Hvc5bGLRszA5/Jinv+EqwOT9
 LHXTE/CsQGJCOz72SjDZT4Gsa0t11UKdRpznk4XCEvH9tflK78nS32XUktZEC9u/
 bCycLbvX+LrquxjQ9WN2TCmwnwyEiv45tSK2b8gf8JS1zJmePDKdnQ1dpHbiZAIO
 uhEhAqDwAY64+T2+AGncITh8ZfthZhU6wkfGoepqYvC1/5AaeSWrFidDvE1NJUGh
 xjcsGH6Ym8NnnT3rt/qp
 =uOIM
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes:
 - Stable fix for data corruption when retransmitting O_DIRECT writes
 - Stable fix for a deep recursion/stack overflow bug in rpc_release_client
 - Stable fix for infinite looping when mounting a NFSv4.x volume
 - Fix a typo in the nfs mount option parser
 - Allow pNFS layouts to be compiled into the kernel when NFSv4.1 is

* tag 'nfs-for-3.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix pnfs Kconfig defaults
  NFS: correctly report misuse of "migration" mount option.
  nfs: don't retry detect_trunking with RPC_AUTH_UNIX more than once
  SUNRPC: Avoid deep recursion in rpc_release_client
  SUNRPC: Fix a data corruption issue when retransmitting RPC calls
2013-11-16 13:14:56 -08:00
Linus Torvalds
449bf8d03c Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from Bruce Fields:
 "This includes miscellaneous bugfixes and cleanup and a performance fix
  for write-heavy NFSv4 workloads.

  (The most significant nfsd-relevant change this time is actually in
  the delegation patches that went through Viro, fixing a long-standing
  bug that can cause NFSv4 clients to miss updates made by non-nfs users
  of the filesystem.  Those enable some followup nfsd patches which I
  have queued locally, but those can wait till 3.14)"

* 'nfsd-next' of git://linux-nfs.org/~bfields/linux: (24 commits)
  nfsd: export proper maximum file size to the client
  nfsd4: improve write performance with better sendspace reservations
  svcrpc: remove an unnecessary assignment
  sunrpc: comment typo fix
  Revert "nfsd: remove_stid can be incorporated into nfs4_put_delegation"
  nfsd4: fix discarded security labels on setattr
  NFSD: Add support for NFS v4.2 operation checking
  nfsd4: nfsd_shutdown_net needs state lock
  NFSD: Combine decode operations for v4 and v4.1
  nfsd: -EINVAL on invalid anonuid/gid instead of silent failure
  nfsd: return better errors to exportfs
  nfsd: fh_update should error out in unexpected cases
  nfsd4: need to destroy revoked delegations in destroy_client
  nfsd: no need to unhash_stid before free
  nfsd: remove_stid can be incorporated into nfs4_put_delegation
  nfsd: nfs4_open_delegation needs to remove_stid rather than unhash_stid
  nfsd: nfs4_free_stid
  nfsd: fix Kconfig syntax
  sunrpc: trim off EC bytes in GSSAPI v2 unwrap
  gss_krb5: document that we ignore sequence number
  ...
2013-11-16 12:04:02 -08:00
Al Viro
b26d4cd385 consolidate simple ->d_delete() instances
Rename simple_delete_dentry() to always_delete_dentry() and export it.
Export simple_dentry_operations, while we are at it, and get rid of
their duplicates

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-15 22:04:17 -05:00
Eric Dumazet
f52ed89971 pkt_sched: fq: fix pacing for small frames
For performance reasons, sch_fq tried hard to not setup timers for every
sent packet, using a quantum based heuristic : A delay is setup only if
the flow exhausted its credit.

Problem is that application limited flows can refill their credit
for every queued packet, and they can evade pacing.

This problem can also be triggered when TCP flows use small MSS values,
as TSO auto sizing builds packets that are smaller than the default fq
quantum (3028 bytes)

This patch adds a 40 ms delay to guard flow credit refill.

Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 21:01:52 -05:00
Eric Dumazet
65c5189a2b pkt_sched: fq: warn users using defrate
Commit 7eec4174ff ("pkt_sched: fq: fix non TCP flows pacing")
obsoleted TCA_FQ_FLOW_DEFAULT_RATE without notice for the users.

Suggested by David Miller

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 21:01:52 -05:00
Johannes Berg
568508aa07 genetlink: unify registration functions
Now that the ops assignment is just two variables rather than a
long list iteration etc., there's no reason to separately export
__genl_register_family() and __genl_register_family_with_ops().

Unify the two functions into __genl_register_family() and make
genl_register_family_with_ops() call it after assigning the ops.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 20:50:23 -05:00
Linus Torvalds
9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
Michal Kubeček
529d048954 macvlan: disable LRO on lower device instead of macvlan
A macvlan device has always LRO disabled so that calling
dev_disable_lro() on it does nothing. If we need to disable LRO
e.g. because

  - the macvlan device is inserted into a bridge
  - IPv6 forwarding is enabled for it
  - it is in a different namespace than lowerdev and IPv4
    forwarding is enabled in it

we need to disable LRO on its underlying device instead (as we
do for 802.1q VLAN devices).

v2: use newly introduced netif_is_macvlan()

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 17:55:48 -05:00
John W. Linville
32019c739c Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth 2013-11-15 14:18:45 -05:00
Jukka Rissanen
1188f05497 6lowpan: Uncompression of traffic class field was incorrect
If priority/traffic class field in IPv6 header is set (seen when
using ssh), the uncompression sets the TC and Flow fields incorrectly.

Example:

This is IPv6 header of a sent packet. Note the priority/TC (=1) in
the first byte.

00000000: 61 00 00 00 00 2c 06 40 fe 80 00 00 00 00 00 00
00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
00000020: 02 1e ab ff fe 4c 52 57

This gets compressed like this in the sending side

00000000: 72 31 04 06 02 1e ab ff fe 4c 52 57 ec c2 00 16
00000010: aa 2d fe 92 86 4e be c6 ....

In the receiving end, the packet gets uncompressed to this
IPv6 header

00000000: 60 06 06 02 00 2a 1e 40 fe 80 00 00 00 00 00 00
00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
00000020: ab ff fe 4c 52 57 ec c2

First four bytes are set incorrectly and we have also lost
two bytes from destination address.

The fix is to switch the case values in switch statement
when checking the TC field.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 03:11:06 -05:00
Erik Hugne
3db0a197ed tipc: fix dereference before check warning
This fixes the following Smatch warning:
net/tipc/link.c:2364 tipc_link_recv_fragment()
    warn: variable dereferenced before check '*head' (see line 2361)

A null pointer might be passed to skb_try_coalesce if
a malicious sender injects orphan fragments on a link.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 03:11:06 -05:00
Linus Torvalds
b746f9c794 Nothing really exciting: some groundwork for changing virtio endian, and
some robustness fixes for broken virtio devices, plus minor tweaks.
 
 [vs last pull request: added the virtio-scsi broken vq escape patch, which
 I somehow lost.]
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgDsJAAoJENkgDmzRrbjxEE4P/jXqZHS/HdlxW9k0BjKKlEIF
 PdtCoP3UhWTdskXvy2pD8m6nYn214MEJYUIa4HFlIEZsdxhuexzQHY19Ynkjagyv
 57sRsUUm5fYQLIL7IUh2DUD1VU38hUFinno/y333szzvCj9qITDA/QABsiWxK8NO
 dq+Lmeixgrhc5yN9iryW+gZV+hekJIZ4LsU5ejSaJucKblzXUH8qIbmSthG7RTYJ
 tr4J7xTTXbhxY4CoC5Dpx2hvsFkvzaAIvI4Nr1mDjfq5cR8BaYvnC89U1IbhdAey
 p1AbZE58JLrY+Z8K8LBRGV2KjO8qSZ6R47hbZ9nAnodJYB7sZLyj6jUe1q+/htuC
 Dh9Xm9O4eW2xNaFk20dYeIF4UU5/HzdsbvG/IlH8x4sm8/K706ocYyAOHlzYUg2T
 k7gltrgDzDokMgb2R44gwnr4oaJ2q8Gne6JXswlPEv2eRs6vNnA5Xhc0rEHGkU6C
 gYn1vNFN6yx0vf2syG/Ce5pZtMxGpefKQkHzzWdq8FKr1B9s54dDuf2hls7J8A9t
 OQT1gE33yURSelf4Kh4k9zWXaWk/Ohv9l2R1cqpALnJ4/+q0fP5t7HdK500S7aax
 DxLeFeqvsBw7nlWgsGxQmt+fjITQFHhcDiwst0ehnt6RbDEW7XPIguz0K/gyhxYG
 +UNbl/5Gr64jnUX3YCzm
 =vY2L
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "Nothing really exciting: some groundwork for changing virtio endian,
  and some robustness fixes for broken virtio devices, plus minor
  tweaks"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_scsi: verify if queue is broken after virtqueue_get_buf()
  x86, asmlinkage, lguest: Pass in globals into assembler statement
  virtio: mmio: fix signature checking for BE guests
  virtio_ring: adapt to notify() returning bool
  virtio_net: verify if queue is broken after virtqueue_get_buf()
  virtio_console: verify if queue is broken after virtqueue_get_buf()
  virtio_blk: verify if queue is broken after virtqueue_get_buf()
  virtio_ring: add new function virtqueue_is_broken()
  virtio_test: verify if virtqueue_kick() succeeded
  virtio_net: verify if virtqueue_kick() succeeded
  virtio_ring: let virtqueue_{kick()/notify()} return a bool
  virtio_ring: change host notification API
  virtio_config: remove virtio_config_val
  virtio: use size-based config accessors.
  virtio_config: introduce size-based accessors.
  virtio_ring: plug kmemleak false positive.
  virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
2013-11-15 13:28:47 +09:00
Tetsuo Handa
652586df95 seq_file: remove "%n" usage from seq_file users
All seq_printf() users are using "%n" for calculating padding size,
convert them to use seq_setwidth() / seq_pad() pair.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:20 +09:00
Eric Dumazet
c9e9042994 ipv4: fix possible seqlock deadlock
ip4_datagram_connect() being called from process context,
it should use IP_INC_STATS() instead of IP_INC_STATS_BH()
otherwise we can deadlock on 32bit arches, or get corruptions of
SNMP counters.

Fixes: 584bdf8cbd ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:31:14 -05:00
Geyslan G. Bem
84a035f694 net/hsr: Fix possible leak in 'hsr_get_node_status()'
If 'hsr_get_node_data()' returns error, going directly to 'fail' label
doesn't free the memory pointed by 'skb_out'.

Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:26:21 -05:00
Maciej Żenczykowski
2abc2f070e pkt_sched: fq: change classification of control packets
Initial sch_fq implementation copied code from pfifo_fast to classify
a packet as a high prio packet.

This clashes with setups using PRIO with say 7 bands, as one of the
band could be incorrectly (mis)classified by FQ.

Packets would be queued in the 'internal' queue, and no pacing ever
happen for this special queue.

Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:16:07 -05:00
Johannes Berg
4534de8305 genetlink: make all genl_ops users const
Now that genl_ops are no longer modified in place when
registering, they can be made const. This patch was done
mostly with spatch:

@@
identifier ops;
@@
+const
 struct genl_ops ops[] = {
 ...
 };

(except the struct thing in net/openvswitch/datapath.c)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:41 -05:00
Johannes Berg
f84f771d94 genetlink: allow making ops const
Allow making the ops array const by not modifying the ops
flags on registration but rather only when ops are sent
out in the family information.

No users are updated yet except for the pre_doit/post_doit
calls in wireless (the only ones that exist now.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:41 -05:00
Johannes Berg
d91824c08f genetlink: register family ops as array
Instead of using a linked list, use an array. This reduces
the data size needed by the users of genetlink, for example
in wireless (net/wireless/nl80211.c) on 64-bit it frees up
over 1K of data space.

Remove the attempted sending of CTRL_CMD_NEWOPS ctrl event
since genl_ctrl_event(CTRL_CMD_NEWOPS, ...) only returns
-EINVAL anyway, therefore no such event could ever be sent.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:41 -05:00
Johannes Berg
3686ec5e84 genetlink: remove genl_register_ops/genl_unregister_ops
genl_register_ops() is still needed for internal registration,
but is no longer available to users of the API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:40 -05:00
Johannes Berg
b61a5eea59 wimax: use genl_register_family_with_ops()
This simplifies the code since there's no longer a need to
have error handling in the registration.

Unfortunately it means more extern function declarations are
needed, but the overall goal would seem to justify this.

Due to the removal of duplication in the netlink policies,
this reduces the size of wimax by almost 1k.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:40 -05:00
Johannes Berg
1c582d915d ieee802154: use genl_register_family_with_ops()
This simplifies the code since there's no longer a need to
have error handling in the registration.

Unfortunately it means more extern function declarations are
needed, but the overall goal would seem to justify this.

While at it, also fix the registration error path - if the
family registration failed then it shouldn't be unregistered.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:40 -05:00
Johannes Berg
9504b3ee1c hsr: use genl_register_family_with_ops()
This simplifies the code since there's no longer a
need to have error handling in the registration.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:40 -05:00
Nicolas Dichtel
1e9f3d6f1c ip6tnl: fix use after free of fb_tnl_dev
Bug has been introduced by commit bb8140947a ("ip6tnl: allow to use rtnl ops
on fb tunnel").

When ip6_tunnel.ko is unloaded, FB device is delete by rtnl_link_unregister()
and then we try to use the pointer in ip6_tnl_destroy_tunnels().

Let's add an handler for dellink, which will never remove the FB tunnel. With
this patch it will no more be possible to remove it via 'ip link del ip6tnl0',
but it's safer.

The same fix was already proposed by Willem de Bruijn <willemb@google.com> for
sit interfaces.

CC: Willem de Bruijn <willemb@google.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:04:38 -05:00
Nicolas Dichtel
f7cb888633 sit/gre6: don't try to add the same route two times
addrconf_add_linklocal() already adds the link local route, so there is no
reason to add it before calling this function.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:59:16 -05:00
Nicolas Dichtel
f0e2acfa30 sit: link local routes are missing
When a link local address was added to a sit interface, the corresponding route
was not configured. This breaks routing protocols that use the link local
address, like OSPFv3.

To ease the code reading, I remove sit_route_add(), which only adds v4 mapped
routes, and add this kind of route directly in sit_add_v4_addrs(). Thus link
local and v4 mapped routes are configured in the same place.

Reported-by: Li Hongjun <hongjun.li@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:59:16 -05:00
Nicolas Dichtel
929c9cf310 sit: fix prefix length of ll and v4mapped addresses
When the local IPv4 endpoint is wilcard (0.0.0.0), the prefix length is
correctly set, ie 64 if the address is a link local one or 96 if the address is
a v4 mapped one.
But when the local endpoint is specified, the prefix length is set to 128 for
both kind of address. This patch fix this wrong prefix length.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:59:16 -05:00
Willem de Bruijn
9434266f2c sit: fix use after free of fb_tunnel_dev
Bug: The fallback device is created in sit_init_net and assumed to be
freed in sit_exit_net. First, it is dereferenced in that function, in
sit_destroy_tunnels:

        struct net *net = dev_net(sitn->fb_tunnel_dev);

Prior to this, rtnl_unlink_register has removed all devices that match
rtnl_link_ops == sit_link_ops.

Commit 205983c437 added the line

+       sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops;

which cases the fallback device to match here and be freed before it
is last dereferenced.

Fix: This commit adds an explicit .delllink callback to sit_link_ops
that skips deallocation at rtnl_unlink_register for the fallback
device. This mechanism is comparable to the one in ip_tunnel.

It also modifies sit_destroy_tunnels and its only caller sit_exit_net
to avoid the offending dereference in the first place. That double
lookup is more complicated than required.

Test: The bug is only triggered when CONFIG_NET_NS is enabled. It
causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that
this bug exists at the mentioned commit, at davem-net HEAD and at
3.11.y HEAD. Verified that it went away after applying this patch.

Fixes: 205983c437 ("sit: allow to use rtnl ops on fb tunnel")

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:42:17 -05:00
Chang Xiangzhong
d30a58ba2e net: sctp: bug-fixing: retran_path not set properly after transports recovering (v3)
When a transport recovers due to the new coming sack, SCTP should
iterate all of its transport_list to locate the __two__ most recently used
transport and set to active_path and retran_path respectively. The exising
code does not find the two properly - In case of the following list:

[most-recent] -> [2nd-most-recent] -> ...

Both active_path and retran_path would be set to the 1st element.

The bug happens when:
1) multi-homing
2) failure/partial_failure transport recovers
Both active_path and retran_path would be set to the same most-recent one, in
other words, retran_path would not take its role - an end user might not even
notice this issue.

Signed-off-by: Chang Xiangzhong <changxiangzhong@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:35:09 -05:00
Eric Dumazet
dccf76ca6b net-tcp: fix panic in tcp_fastopen_cache_set()
We had some reports of crashes using TCP fastopen, and Dave Jones
gave a nice stack trace pointing to the error.

Issue is that tcp_get_metrics() should not be called with a NULL dst

Fixes: 1fe4c481ba ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dave Jones <davej@redhat.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Tested-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:33:18 -05:00
Eric Dumazet
98e09386c0 tcp: tsq: restore minimal amount of queueing
After commit c9eeec26e3 ("tcp: TSQ can use a dynamic limit"), several
users reported throughput regressions, notably on mvneta and wifi
adapters.

802.11 AMPDU requires a fair amount of queueing to be effective.

This patch partially reverts the change done in tcp_write_xmit()
so that the minimal amount is sysctl_tcp_limit_output_bytes.

It also remove the use of this sysctl while building skb stored
in write queue, as TSO autosizing does the right thing anyway.

Users with well behaving NICS and correct qdisc (like sch_fq),
can then lower the default sysctl_tcp_limit_output_bytes value from
128KB to 8KB.

This new usage of sysctl_tcp_limit_output_bytes permits each driver
authors to check how their driver performs when/if the value is set
to a minimum of 4KB.

Normally, line rate for a single TCP flow should be possible,
but some drivers rely on timers to perform TX completion and
too long TX completion delays prevent reaching full throughput.

Fixes: c9eeec26e3 ("tcp: TSQ can use a dynamic limit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Sujith Manoharan <sujith@msujith.org>
Reported-by: Arnaud Ebalard <arno@natisbad.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:25:14 -05:00
Toshiaki Makita
b4e09b29c7 bridge: Fix memory leak when deleting bridge with vlan filtering enabled
We currently don't call br_vlan_flush() when deleting a bridge, which
leads to memory leak if br->vlan_info is allocated.

Steps to reproduce:
  while :
  do
    brctl addbr br0
    bridge vlan add dev br0 vid 10 self
    brctl delbr br0
  done
We can observe the cache size of corresponding slab entry
(as kmalloc-2048 in SLUB) is increased.

kmemleak output:
unreferenced object 0xffff8800b68a7000 (size 2048):
  comm "bridge", pid 2086, jiffies 4295774704 (age 47.656s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 48 9b 36 00 88 ff ff  .........H.6....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff815eb6ae>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8116a1ca>] kmem_cache_alloc_trace+0xca/0x220
    [<ffffffffa03eddd6>] br_vlan_add+0x66/0xe0 [bridge]
    [<ffffffffa03e543c>] br_setlink+0x2dc/0x340 [bridge]
    [<ffffffff8150e481>] rtnl_bridge_setlink+0x101/0x200
    [<ffffffff8150d9d9>] rtnetlink_rcv_msg+0x99/0x260
    [<ffffffff81528679>] netlink_rcv_skb+0xa9/0xc0
    [<ffffffff8150d938>] rtnetlink_rcv+0x28/0x30
    [<ffffffff81527ccd>] netlink_unicast+0xdd/0x190
    [<ffffffff8152807f>] netlink_sendmsg+0x2ff/0x740
    [<ffffffff814e8368>] sock_sendmsg+0x88/0xc0
    [<ffffffff814e8ac8>] ___sys_sendmsg.part.14+0x298/0x2b0
    [<ffffffff814e91de>] __sys_sendmsg+0x4e/0x90
    [<ffffffff814e922e>] SyS_sendmsg+0xe/0x10
    [<ffffffff81601669>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:16:34 -05:00
Toshiaki Makita
dbbaf949bc bridge: Call vlan_vid_del for all vids at nbp_vlan_flush
We should call vlan_vid_del for all vids at nbp_vlan_flush to prevent
vid_info->refcount from being leaked when detaching a bridge port.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:16:34 -05:00
Toshiaki Makita
192368372d bridge: Use vlan_vid_[add/del] instead of direct ndo_vlan_rx_[add/kill]_vid calls
We should use wrapper functions vlan_vid_[add/del] instead of
ndo_vlan_rx_[add/kill]_vid. Otherwise, we might be not able to communicate
using vlan interface in a certain situation.

Example of problematic case:
  vconfig add eth0 10
  brctl addif br0 eth0
  bridge vlan add dev eth0 vid 10
  bridge vlan del dev eth0 vid 10
  brctl delif br0 eth0
In this case, we cannot communicate via eth0.10 because vlan 10 is
filtered by NIC that has the vlan filtering feature.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:16:34 -05:00
Alexei Starovoitov
81b9eab5eb core/dev: do not ignore dmac in dev_forward_skb()
commit 06a23fe31c
("core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()")
and refactoring 64261f230a
("dev: move skb_scrub_packet() after eth_type_trans()")

are forcing pkt_type to be PACKET_HOST when skb traverses veth.

which means that ip forwarding will kick in inside netns
even if skb->eth->h_dest != dev->dev_addr

Fix order of eth_type_trans() and skb_scrub_packet() in dev_forward_skb()
and in ip_tunnel_rcv()

Fixes: 06a23fe31c ("core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()")
CC: Isaku Yamahata <yamahatanetdev@gmail.com>
CC: Maciej Zenczykowski <zenczykowski@gmail.com>
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 02:39:53 -05:00
Linus Torvalds
5e30025a31 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking changes from Ingo Molnar:
 "The biggest changes:

   - add lockdep support for seqcount/seqlocks structures, this
     unearthed both bugs and required extra annotation.

   - move the various kernel locking primitives to the new
     kernel/locking/ directory"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  block: Use u64_stats_init() to initialize seqcounts
  locking/lockdep: Mark __lockdep_count_forward_deps() as static
  lockdep/proc: Fix lock-time avg computation
  locking/doc: Update references to kernel/mutex.c
  ipv6: Fix possible ipv6 seqlock deadlock
  cpuset: Fix potential deadlock w/ set_mems_allowed
  seqcount: Add lockdep functionality to seqcount/seqlock structures
  net: Explicitly initialize u64_stats_sync structures for lockdep
  locking: Move the percpu-rwsem code to kernel/locking/
  locking: Move the lglocks code to kernel/locking/
  locking: Move the rwsem code to kernel/locking/
  locking: Move the rtmutex code to kernel/locking/
  locking: Move the semaphore core to kernel/locking/
  locking: Move the spinlock code to kernel/locking/
  locking: Move the lockdep code to kernel/locking/
  locking: Move the mutex code to kernel/locking/
  hung_task debugging: Add tracepoint to report the hang
  x86/locking/kconfig: Update paravirt spinlock Kconfig description
  lockstat: Report avg wait and hold times
  lockdep, x86/alternatives: Drop ancient lockdep fixup message
  ...
2013-11-14 16:30:30 +09:00
Randy Dunlap
4819224853 netfilter: fix connlimit Kconfig prompt string
Under Core Netfilter Configuration, connlimit match support has
an extra double quote at the end of it.

Fixes a portion of kernel bugzilla #52671:
  https://bugzilla.kernel.org/show_bug.cgi?id=52671

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: lailavrazda1979@gmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-13 23:31:11 +01:00
Weng Meiling
587ac5ee6f svcrpc: remove an unnecessary assignment
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-11-13 15:31:22 -05:00
Johan Hedberg
86ca9eac31 Bluetooth: Fix rejecting SMP security request in slave role
The SMP security request is for a slave role device to request the
master role device to initiate a pairing request. If we receive this
command while we're in the slave role we should reject it appropriately.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-11-13 11:36:54 -02:00
Seung-Woo Kim
31e8ce80ba Bluetooth: Fix crash in l2cap_chan_send after l2cap_chan_del
Removing a bond and disconnecting from a specific remote device
can cause l2cap_chan_send() is called after l2cap_chan_del() is
called. This causes following crash.

[ 1384.972086] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1384.972090] pgd = c0004000
[ 1384.972125] [00000008] *pgd=00000000
[ 1384.972137] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[ 1384.972144] Modules linked in:
[ 1384.972156] CPU: 0 PID: 841 Comm: krfcommd Not tainted 3.10.14-gdf22a71-dirty #435
[ 1384.972162] task: df29a100 ti: df178000 task.ti: df178000
[ 1384.972182] PC is at l2cap_create_basic_pdu+0x30/0x1ac
[ 1384.972191] LR is at l2cap_chan_send+0x100/0x1d4
[ 1384.972198] pc : [<c051d250>]    lr : [<c0521c78>]    psr: 40000113
[ 1384.972198] sp : df179d40  ip : c083a010  fp : 00000008
[ 1384.972202] r10: 00000004  r9 : 0000065a  r8 : 000003f5
[ 1384.972206] r7 : 00000000  r6 : 00000000  r5 : df179e84  r4 : da557000
[ 1384.972210] r3 : 00000000  r2 : 00000004  r1 : df179e84  r0 : 00000000
[ 1384.972215] Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[ 1384.972220] Control: 10c53c7d  Table: 5c8b004a  DAC: 00000015
[ 1384.972224] Process krfcommd (pid: 841, stack limit = 0xdf178238)
[ 1384.972229] Stack: (0xdf179d40 to 0xdf17a000)
[ 1384.972238] 9d40: 00000000 da557000 00000004 df179e84 00000004 000003f5 0000065a 00000000
[ 1384.972245] 9d60: 00000008 c0521c78 df179e84 da557000 00000004 da557204 de0c6800 df179e84
[ 1384.972253] 9d80: da557000 00000004 da557204 c0526b7c 00000004 df724000 df179e84 00000004
[ 1384.972260] 9da0: df179db0 df29a100 c083bc48 c045481c 00000001 00000000 00000000 00000000
[ 1384.972267] 9dc0: 00000000 df29a100 00000000 00000000 00000000 00000000 df179e10 00000000
[ 1384.972274] 9de0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1384.972281] 9e00: 00000000 00000000 00000000 00000000 df179e4c c000ec80 c0b538c0 00000004
[ 1384.972288] 9e20: df724000 df178000 00000000 df179e84 c0b538c0 00000000 df178000 c07f4570
[ 1384.972295] 9e40: dcad9c00 df179e74 c07f4394 df179e60 df178000 00000000 df179e84 de247010
[ 1384.972303] 9e60: 00000043 c0454dec 00000001 00000004 df315c00 c0530598 00000004 df315c0c
[ 1384.972310] 9e80: ffffc32c 00000000 00000000 df179ea0 00000001 00000000 00000000 00000000
[ 1384.972317] 9ea0: df179ebc 00000004 df315c00 c05df838 00000000 c0530810 c07d08c0 d7017303
[ 1384.972325] 9ec0: 6ec245b9 00000000 df315c00 c0531b04 c07f3fe0 c07f4018 da67a300 df315c00
[ 1384.972332] 9ee0: 00000000 c05334e0 df315c00 df315b80 df315c00 de0c6800 da67a300 00000000
[ 1384.972339] 9f00: de0c684c c0533674 df204100 df315c00 df315c00 df204100 df315c00 c082b138
[ 1384.972347] 9f20: c053385c c0533754 a0000113 df178000 00000001 c083bc48 00000000 c053385c
[ 1384.972354] 9f40: 00000000 00000000 00000000 c05338c4 00000000 df9f0000 df9f5ee4 df179f6c
[ 1384.972360] 9f60: df178000 c0049db4 00000000 00000000 c07f3ff8 00000000 00000000 00000000
[ 1384.972368] 9f80: df179f80 df179f80 00000000 00000000 df179f90 df179f90 df9f5ee4 c0049cfc
[ 1384.972374] 9fa0: 00000000 00000000 00000000 c000f168 00000000 00000000 00000000 00000000
[ 1384.972381] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1384.972388] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00010000 00000600
[ 1384.972411] [<c051d250>] (l2cap_create_basic_pdu+0x30/0x1ac) from [<c0521c78>] (l2cap_chan_send+0x100/0x1d4)
[ 1384.972425] [<c0521c78>] (l2cap_chan_send+0x100/0x1d4) from [<c0526b7c>] (l2cap_sock_sendmsg+0xa8/0x104)
[ 1384.972440] [<c0526b7c>] (l2cap_sock_sendmsg+0xa8/0x104) from [<c045481c>] (sock_sendmsg+0xac/0xcc)
[ 1384.972453] [<c045481c>] (sock_sendmsg+0xac/0xcc) from [<c0454dec>] (kernel_sendmsg+0x2c/0x34)
[ 1384.972469] [<c0454dec>] (kernel_sendmsg+0x2c/0x34) from [<c0530598>] (rfcomm_send_frame+0x58/0x7c)
[ 1384.972481] [<c0530598>] (rfcomm_send_frame+0x58/0x7c) from [<c0530810>] (rfcomm_send_ua+0x98/0xbc)
[ 1384.972494] [<c0530810>] (rfcomm_send_ua+0x98/0xbc) from [<c0531b04>] (rfcomm_recv_disc+0xac/0x100)
[ 1384.972506] [<c0531b04>] (rfcomm_recv_disc+0xac/0x100) from [<c05334e0>] (rfcomm_recv_frame+0x144/0x264)
[ 1384.972519] [<c05334e0>] (rfcomm_recv_frame+0x144/0x264) from [<c0533674>] (rfcomm_process_rx+0x74/0xfc)
[ 1384.972531] [<c0533674>] (rfcomm_process_rx+0x74/0xfc) from [<c0533754>] (rfcomm_process_sessions+0x58/0x160)
[ 1384.972543] [<c0533754>] (rfcomm_process_sessions+0x58/0x160) from [<c05338c4>] (rfcomm_run+0x68/0x110)
[ 1384.972558] [<c05338c4>] (rfcomm_run+0x68/0x110) from [<c0049db4>] (kthread+0xb8/0xbc)
[ 1384.972576] [<c0049db4>] (kthread+0xb8/0xbc) from [<c000f168>] (ret_from_fork+0x14/0x2c)
[ 1384.972586] Code: e3100004 e1a07003 e5946000 1a000057 (e5969008)
[ 1384.972614] ---[ end trace 6170b7ce00144e8c ]---

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-11-13 11:36:54 -02:00
Seung-Woo Kim
8992da0993 Bluetooth: Fix to set proper bdaddr_type for RFCOMM connect
L2CAP socket validates proper bdaddr_type for connect, so this
patch fixes to set explictly bdaddr_type for RFCOMM connect.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-11-13 11:36:53 -02:00
Seung-Woo Kim
c507f138fc Bluetooth: Fix RFCOMM bind fail for L2CAP sock
L2CAP socket bind checks its bdaddr type but RFCOMM kernel thread
does not assign proper bdaddr type for L2CAP sock. This can cause
that RFCOMM failure.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-11-13 11:36:53 -02:00
Marcel Holtmann
60c7a3c9c7 Bluetooth: Fix issue with RFCOMM getsockopt operation
The commit 94a86df010 seem to have
uncovered a long standing bug that did not trigger so far.

BUG: unable to handle kernel paging request at 00000009dd503502
IP: [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: ath5k ath mac80211 cfg80211
CPU: 2 PID: 1459 Comm: bluetoothd Not tainted 3.11.0-133163-gcebd830 #2
Hardware name: System manufacturer System Product Name/P6T DELUXE V2, BIOS
1202    12/22/2010
task: ffff8803304106a0 ti: ffff88033046a000 task.ti: ffff88033046a000
RIP: 0010:[<ffffffff815b1868>]  [<ffffffff815b1868>]
rfcomm_sock_getsockopt+0x128/0x200
RSP: 0018:ffff88033046bed8  EFLAGS: 00010246
RAX: 00000009dd503502 RBX: 0000000000000003 RCX: 00007fffa2ed5548
RDX: 0000000000000003 RSI: 0000000000000012 RDI: ffff88032fd37480
RBP: ffff88033046bf28 R08: 00007fffa2ed554c R09: ffff88032f5707d8
R10: 00007fffa2ed5548 R11: 0000000000000202 R12: ffff880330bbd000
R13: 00007fffa2ed5548 R14: 0000000000000003 R15: 00007fffa2ed554c
FS:  00007fc44cfac700(0000) GS:ffff88033fc80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000009dd503502 CR3: 00000003304c2000 CR4: 00000000000007e0
Stack:
ffff88033046bf28 ffffffff815b0f2f ffff88033046bf18 0002ffff81105ef6
0000000600000000 ffff88032fd37480 0000000000000012 00007fffa2ed5548
0000000000000003 00007fffa2ed554c ffff88033046bf78 ffffffff814c0380
Call Trace:
[<ffffffff815b0f2f>] ? rfcomm_sock_setsockopt+0x5f/0x190
[<ffffffff814c0380>] SyS_getsockopt+0x60/0xb0
[<ffffffff815e0852>] system_call_fastpath+0x16/0x1b
Code: 02 00 00 00 0f 47 d0 4c 89 ef e8 74 13 cd ff 83 f8 01 19 c9 f7 d1 83 e1
f2 e9 4b ff ff ff 0f 1f 44 00 00 49 8b 84 24 70 02 00 00 <4c> 8b 30 4c 89 c0 e8
2d 19 cd ff 85 c0 49 89 d7 b9 f2 ff ff ff
RIP  [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200
RSP <ffff88033046bed8>
CR2: 00000009dd503502

It triggers in the following segment of the code:

0x1313 is in rfcomm_sock_getsockopt (net/bluetooth/rfcomm/sock.c:743).
738
739	static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __user *optval, int __user *optlen)
740	{
741		struct sock *sk = sock->sk;
742		struct rfcomm_conninfo cinfo;
743		struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;
744		int len, err = 0;
745		u32 opt;
746
747		BT_DBG("sk %p", sk);

The l2cap_pi(sk) is wrong here since it should have been rfcomm_pi(sk),
but that socket of course does not contain the low-level connection
details requested here.

Tracking down the actual offending commit, it seems that this has been
introduced when doing some L2CAP refactoring:

commit 8c1d787be4
Author: Gustavo F. Padovan <padovan@profusion.mobi>
Date:   Wed Apr 13 20:23:55 2011 -0300

@@ -743,6 +743,7 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u
        struct sock *sk = sock->sk;
        struct sock *l2cap_sk;
        struct rfcomm_conninfo cinfo;
+       struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;
        int len, err = 0;
        u32 opt;

@@ -787,8 +788,8 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u

                l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;

-               cinfo.hci_handle = l2cap_pi(l2cap_sk)->conn->hcon->handle;
-               memcpy(cinfo.dev_class, l2cap_pi(l2cap_sk)->conn->hcon->dev_class, 3);
+               cinfo.hci_handle = conn->hcon->handle;
+               memcpy(cinfo.dev_class, conn->hcon->dev_class, 3);

The l2cap_sk got accidentally mixed into the sk (which is RFCOMM) and
now causing a problem within getsocketopt() system call. To fix this,
just re-introduce l2cap_sk and make sure the right socket is used for
the low-level connection details.

Reported-by: Fabio Rossi <rossi.f@inwind.it>
Reported-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Tested-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-11-13 11:36:52 -02:00
Linus Torvalds
42a2d923cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) The addition of nftables.  No longer will we need protocol aware
    firewall filtering modules, it can all live in userspace.

    At the core of nftables is a, for lack of a better term, virtual
    machine that executes byte codes to inspect packet or metadata
    (arriving interface index, etc.) and make verdict decisions.

    Besides support for loading packet contents and comparing them, the
    interpreter supports lookups in various datastructures as
    fundamental operations.  For example sets are supports, and
    therefore one could create a set of whitelist IP address entries
    which have ACCEPT verdicts attached to them, and use the appropriate
    byte codes to do such lookups.

    Since the interpreted code is composed in userspace, userspace can
    do things like optimize things before giving it to the kernel.

    Another major improvement is the capability of atomically updating
    portions of the ruleset.  In the existing netfilter implementation,
    one has to update the entire rule set in order to make a change and
    this is very expensive.

    Userspace tools exist to create nftables rules using existing
    netfilter rule sets, but both kernel implementations will need to
    co-exist for quite some time as we transition from the old to the
    new stuff.

    Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
    worked so hard on this.

 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
    to our pseudo-random number generator, mostly used for things like
    UDP port randomization and netfitler, amongst other things.

    In particular the taus88 generater is updated to taus113, and test
    cases are added.

 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
    and Yang Yingliang.

 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
    Sujir.

 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
    Neal Cardwell, and Yuchung Cheng.

 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
    control message data, much like other socket option attributes.
    From Francesco Fusco.

 7) Allow applications to specify a cap on the rate computed
    automatically by the kernel for pacing flows, via a new
    SO_MAX_PACING_RATE socket option.  From Eric Dumazet.

 8) Make the initial autotuned send buffer sizing in TCP more closely
    reflect actual needs, from Eric Dumazet.

 9) Currently early socket demux only happens for TCP sockets, but we
    can do it for connected UDP sockets too.  Implementation from Shawn
    Bohrer.

10) Refactor inet socket demux with the goal of improving hash demux
    performance for listening sockets.  With the main goals being able
    to use RCU lookups on even request sockets, and eliminating the
    listening lock contention.  From Eric Dumazet.

11) The bonding layer has many demuxes in it's fast path, and an RCU
    conversion was started back in 3.11, several changes here extend the
    RCU usage to even more locations.  From Ding Tianhong and Wang
    Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
    Falico.

12) Allow stackability of segmentation offloads to, in particular, allow
    segmentation offloading over tunnels.  From Eric Dumazet.

13) Significantly improve the handling of secret keys we input into the
    various hash functions in the inet hashtables, TCP fast open, as
    well as syncookies.  From Hannes Frederic Sowa.  The key fundamental
    operation is "net_get_random_once()" which uses static keys.

    Hannes even extended this to ipv4/ipv6 fragmentation handling and
    our generic flow dissector.

14) The generic driver layer takes care now to set the driver data to
    NULL on device removal, so it's no longer necessary for drivers to
    explicitly set it to NULL any more.  Many drivers have been cleaned
    up in this way, from Jingoo Han.

15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.

16) Improve CRC32 interfaces and generic SKB checksum iterators so that
    SCTP's checksumming can more cleanly be handled.  Also from Daniel
    Borkmann.

17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
    using the interface MTU value.  This helps avoid PMTU attacks,
    particularly on DNS servers.  From Hannes Frederic Sowa.

18) Use generic XPS for transmit queue steering rather than internal
    (re-)implementation in virtio-net.  From Jason Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  random32: add test cases for taus113 implementation
  random32: upgrade taus88 generator to taus113 from errata paper
  random32: move rnd_state to linux/random.h
  random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
  random32: add periodic reseeding
  random32: fix off-by-one in seeding requirement
  PHY: Add RTL8201CP phy_driver to realtek
  xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
  macmace: add missing platform_set_drvdata() in mace_probe()
  ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
  ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
  vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
  ixgbe: add warning when max_vfs is out of range.
  igb: Update link modes display in ethtool
  netfilter: push reasm skb through instead of original frag skbs
  ip6_output: fragment outgoing reassembled skb properly
  MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
  net_sched: tbf: support of 64bit rates
  ixgbe: deleting dfwd stations out of order can cause null ptr deref
  ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
  ...
2013-11-13 17:40:34 +09:00
Linus Torvalds
9bc9ccd7db Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "All kinds of stuff this time around; some more notable parts:

   - RCU'd vfsmounts handling
   - new primitives for coredump handling
   - files_lock is gone
   - Bruce's delegations handling series
   - exportfs fixes

  plus misc stuff all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
  ecryptfs: ->f_op is never NULL
  locks: break delegations on any attribute modification
  locks: break delegations on link
  locks: break delegations on rename
  locks: helper functions for delegation breaking
  locks: break delegations on unlink
  namei: minor vfs_unlink cleanup
  locks: implement delegations
  locks: introduce new FL_DELEG lock flag
  vfs: take i_mutex on renamed file
  vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
  vfs: don't use PARENT/CHILD lock classes for non-directories
  vfs: pull ext4's double-i_mutex-locking into common code
  exportfs: fix quadratic behavior in filehandle lookup
  exportfs: better variable name
  exportfs: move most of reconnect_path to helper function
  exportfs: eliminate unused "noprogress" counter
  exportfs: stop retrying once we race with rename/remove
  exportfs: clear DISCONNECTED on all parents sooner
  exportfs: more detailed comment for path_reconnect
  ...
2013-11-13 15:34:18 +09:00
Trond Myklebust
d07ba8422f SUNRPC: Avoid deep recursion in rpc_release_client
In cases where an rpc client has a parent hierarchy, then
rpc_free_client may end up calling rpc_release_client() on the
parent, thus recursing back into rpc_free_client. If the hierarchy
is deep enough, then we can get into situations where the stack
simply overflows.

The fix is to have rpc_release_client() loop so that it can take
care of the parent rpc client hierarchy without needing to
recurse.

Reported-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Weston Andros Adamson <dros@netapp.com>
Reported-by: Bruce Fields <bfields@fieldses.org>
Link: http://lkml.kernel.org/r/2C73011F-0939-434C-9E4D-13A1EB1403D7@netapp.com
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-11-12 18:56:57 -05:00
J. Bruce Fields
f06c3d2bb8 sunrpc: comment typo fix
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-11-12 11:42:10 -05:00
Linus Torvalds
39cf275a1a Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes in this cycle are:

   - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
     van Riel, Peter Zijlstra et al.  Yay!

   - optimize preemption counter handling: merge the NEED_RESCHED flag
     into the preempt_count variable, by Peter Zijlstra.

   - wait.h fixes and code reorganization from Peter Zijlstra

   - cfs_bandwidth fixes from Ben Segall

   - SMP load-balancer cleanups from Peter Zijstra

   - idle balancer improvements from Jason Low

   - other fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
  stop_machine: Fix race between stop_two_cpus() and stop_cpus()
  sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
  sched: Fix asymmetric scheduling for POWER7
  sched: Move completion code from core.c to completion.c
  sched: Move wait code from core.c to wait.c
  sched: Move wait.c into kernel/sched/
  sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
  sched: Avoid throttle_cfs_rq() racing with period_timer stopping
  sched: Guarantee new group-entities always have weight
  sched: Fix hrtimer_cancel()/rq->lock deadlock
  sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
  sched: Fix race on toggling cfs_bandwidth_used
  sched: Remove extra put_online_cpus() inside sched_setaffinity()
  sched/rt: Fix task_tick_rt() comment
  sched/wait: Fix build breakage
  sched/wait: Introduce prepare_to_wait_event()
  sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
  sched: Remove get_online_cpus() usage
  sched: Fix race in migrate_swap_stop()
  ...
2013-11-12 10:20:12 +09:00
Hannes Frederic Sowa
f8c31c8f80 ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
Fixes a suspicious rcu derference warning.

Cc: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 01:25:28 -05:00
David S. Miller
e267cb960a vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
This is to avoid very silly Kconfig dependencies for modules
using this routine.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 00:42:07 -05:00
Jiri Pirko
6aafeef03b netfilter: push reasm skb through instead of original frag skbs
Pushing original fragments through causes several problems. For example
for matching, frags may not be matched correctly. Take following
example:

<example>
On HOSTA do:
ip6tables -I INPUT -p icmpv6 -j DROP
ip6tables -I INPUT -p icmpv6 -m icmp6 --icmpv6-type 128 -j ACCEPT

and on HOSTB you do:
ping6 HOSTA -s2000    (MTU is 1500)

Incoming echo requests will be filtered out on HOSTA. This issue does
not occur with smaller packets than MTU (where fragmentation does not happen)
</example>

As was discussed previously, the only correct solution seems to be to use
reassembled skb instead of separete frags. Doing this has positive side
effects in reducing sk_buff by one pointer (nfct_reasm) and also the reams
dances in ipvs and conntrack can be removed.

Future plan is to remove net/ipv6/netfilter/nf_conntrack_reasm.c
entirely and use code in net/ipv6/reassembly.c instead.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 00:19:35 -05:00
Jiri Pirko
9037c3579a ip6_output: fragment outgoing reassembled skb properly
If reassembled packet would fit into outdev MTU, it is not fragmented
according the original frag size and it is send as single big packet.

The second case is if skb is gso. In that case fragmentation does not happen
according to the original frag size.

This patch fixes these.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 00:19:35 -05:00
Yang Yingliang
a33c4a2663 net_sched: tbf: support of 64bit rates
With psched_ratecfg_precompute(), tbf can deal with 64bit rates.
Add two new attributes so that tc can use them to break the 32bit
limit.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-09 14:53:37 -05:00
Trond Myklebust
a6b31d18b0 SUNRPC: Fix a data corruption issue when retransmitting RPC calls
The following scenario can cause silent data corruption when doing
NFS writes. It has mainly been observed when doing database writes
using O_DIRECT.

1) The RPC client uses sendpage() to do zero-copy of the page data.
2) Due to networking issues, the reply from the server is delayed,
   and so the RPC client times out.

3) The client issues a second sendpage of the page data as part of
   an RPC call retransmission.

4) The reply to the first transmission arrives from the server
   _before_ the client hardware has emptied the TCP socket send
   buffer.
5) After processing the reply, the RPC state machine rules that
   the call to be done, and triggers the completion callbacks.
6) The application notices the RPC call is done, and reuses the
   pages to store something else (e.g. a new write).

7) The client NIC drains the TCP socket send buffer. Since the
   page data has now changed, it reads a corrupted version of the
   initial RPC call, and puts it on the wire.

This patch fixes the problem in the following manner:

The ordering guarantees of TCP ensure that when the server sends a
reply, then we know that the _first_ transmission has completed. Using
zero-copy in that situation is therefore safe.
If a time out occurs, we then send the retransmission using sendmsg()
(i.e. no zero-copy), We then know that the socket contains a full copy of
the data, and so it will retransmit a faithful reproduction even if the
RPC call completes, and the application reuses the O_DIRECT buffer in
the meantime.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
2013-11-08 17:19:15 -05:00
Duan Jiong
f104a567e6 ipv6: use rt6_get_dflt_router to get default router in rt6_route_rcv
As the rfc 4191 said, the Router Preference and Lifetime values in a
::/0 Route Information Option should override the preference and lifetime
values in the Router Advertisement header. But when the kernel deals with
a ::/0 Route Information Option, the rt6_get_route_info() always return
NULL, that means that overriding will not happen, because those default
routers were added without flag RTF_ROUTEINFO in rt6_add_dflt_router().

In order to deal with that condition, we should call rt6_get_dflt_router
when the prefix length is 0.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 15:16:04 -05:00
Jiri Benc
cdbe7c2d6d nfnetlink: do not ack malformed messages
Commit 0628b123c9 ("netfilter: nfnetlink: add batch support and use it
from nf_tables") introduced a bug leading to various crashes in netlink_ack
when netlink message with invalid nlmsg_len was sent by an unprivileged
user.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 15:12:11 -05:00
Andreas Henriksson
13eb2ab2d3 net: Fix "ip rule delete table 256"
When trying to delete a table >= 256 using iproute2 the local table
will be deleted.
The table id is specified as a netlink attribute when it needs more then
8 bits and iproute2 then sets the table field to RT_TABLE_UNSPEC (0).
Preconditions to matching the table id in the rule delete code
doesn't seem to take the "table id in netlink attribute" into condition
so the frh_get_table helper function never gets to do its job when
matching against current rule.
Use the helper function twice instead of peaking at the table value directly.

Originally reported at: http://bugs.debian.org/724783

Reported-by: Nicolas HICHER <nhicher@avencall.com>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 14:53:10 -05:00
Florent Fourcot
394055f6fa ipv6: protect flow label renew against GC
Take ip6_fl_lock before to read and update
a label.

v2: protect only the relevant code

Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 13:44:15 -05:00
Florent Fourcot
53b47106c0 ipv6: increase maximum lifetime of flow labels
If the last RFC 6437 does not give any constraints
for lifetime of flow labels, the previous RFC 3697
spoke of a minimum of 120 seconds between
reattribution of a flow label.

The maximum linger is currently set to 60 seconds
and does not allow this configuration without
CAP_NET_ADMIN right.

This patch increase the maximum linger to 150
seconds, allowing more flexibility to standard
users.

Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 13:43:52 -05:00
Florent Fourcot
3fdfa5ff50 ipv6: enable IPV6_FLOWLABEL_MGR for getsockopt
It is already possible to set/put/renew a label
with IPV6_FLOWLABEL_MGR and setsockopt. This patch
add the possibility to get information about this
label (current value, time before expiration, etc).

It helps application to take decision for a renew
or a release of the label.

v2:
 * Add spin_lock to prevent race condition
 * return -ENOENT if no result found
 * check if flr_action is GET

v3:
 * move the spin_lock to protect only the
   relevant code

Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 13:42:57 -05:00
Eric Dumazet
3797d3e846 net: flow_dissector: small optimizations in IPv4 dissect
By moving code around, we avoid :

1) A reload of iph->ihl (bit field, so needs a mask)

2) A conditional test (replaced by a conditional mov on x86)
   Fast path loads iph->protocol anyway.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 13:30:02 -05:00
John W. Linville
c1f3bb6bd3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2013-11-08 09:03:10 -05:00
Eric Dumazet
dcd6077183 inet: fix a UFO regression
While testing virtio_net and skb_segment() changes, Hannes reported
that UFO was sending wrong frames.

It appears this was introduced by a recent commit :
8c3a897bfa ("inet: restore gso for vxlan")

The old condition to perform IP frag was :

tunnel = !!skb->encapsulation;
...
        if (!tunnel && proto == IPPROTO_UDP) {

So the new one should be :

udpfrag = !skb->encapsulation && proto == IPPROTO_UDP;
...
        if (udpfrag) {

Initialization of udpfrag must be done before call
to ops->callbacks.gso_segment(skb, features), as
skb_udp_tunnel_segment() clears skb->encapsulation

(We want udpfrag to be true for UFO, false for VXLAN)

With help from Alexei Starovoitov

Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08 02:07:59 -05:00
Mathias Krause
bc32383cd6 net: skbuff - kernel-doc fixes
Use "@" to refer to parameters in the kernel-doc description. According
to Documentation/kernel-doc-nano-HOWTO.txt "&" shall be used to refer to
structures only.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:28:59 -05:00
Mathias Krause
253c6daa34 caif: use pskb_put() instead of reimplementing its functionality
Also remove the warning for fragmented packets -- skb_cow_data() will
linearize the buffer, removing all fragments.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:28:59 -05:00
Mathias Krause
0c7ddf36c2 net: move pskb_put() to core code
This function has usage beside IPsec so move it to the core skbuff code.
While doing so, give it some documentation and change its return type to
'unsigned char *' to be in line with skb_put().

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:28:58 -05:00
John Fastabend
a6cc0cfa72 net: Add layer 2 hardware acceleration operations for macvlan devices
Add a operations structure that allows a network interface to export
the fact that it supports package forwarding in hardware between
physical interfaces and other mac layer devices assigned to it (such
as macvlans). This operaions structure can be used by virtual mac
devices to bypass software switching so that forwarding can be done
in hardware more efficiently.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:11:41 -05:00
Dan Carpenter
78032f9b3e 6lowpan: release device on error path
We recently added a new error path and it needs a dev_put().

Fixes: 7adac1ec81 ('6lowpan: Only make 6lowpan links to IEEE802154 devices')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:11:13 -05:00
Eyal Perry
d324353919 net/vlan: Provide read access to the vlan egress map
Provide a method for read-only access to the vlan device egress mapping.

Do this by refactoring vlan_dev_get_egress_qos_mask() such that now it
receives as an argument the skb priority instead of pointer to the skb.

Such an access is needed for the IBoE stack where the control plane
goes through the network stack. This is an add-on step on top of commit
d4a968658c "net/route: export symbol ip_tos2prio" which allowed the RDMA-CM
to use ip_tos2prio.

Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:09:44 -05:00
Erik Hugne
a715b49e79 tipc: reassembly failures should cause link reset
If appending a received fragment to the pending fragment chain
in a unicast link fails, the current code tries to force a retransmission
of the fragment by decrementing the 'next received sequence number'
field in the link. This is done under the assumption that the failure
is caused by an out-of-memory situation, an assumption that does
not hold true after the previous patch in this series.

A failure to append a fragment can now only be caused by a protocol
violation by the sending peer, and it must hence be assumed that it
is either malicious or buggy.  Either way, the correct behavior is now
to reset the link instead of trying to revert its sequence number.
So, this is what we do in this commit.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 18:30:11 -05:00
Erik Hugne
40ba3cdf54 tipc: message reassembly using fragment chain
When the first fragment of a long data data message is received on a link, a
reassembly buffer large enough to hold the data from this and all subsequent
fragments of the message is allocated. The payload of each new fragment is
copied into this buffer upon arrival. When the last fragment is received, the
reassembled message is delivered upwards to the port/socket layer.

Not only is this an inefficient approach, but it may also cause bursts of
reassembly failures in low memory situations. since we may fail to allocate
the necessary large buffer in the first place. Furthermore, after 100 subsequent
such failures the link will be reset, something that in reality aggravates the
situation.

To remedy this problem, this patch introduces a different approach. Instead of
allocating a big reassembly buffer, we now append the arriving fragments
to a reassembly chain on the link, and deliver the whole chain up to the
socket layer once the last fragment has been received. This is safe because
the retransmission layer of a TIPC link always delivers packets in strict
uninterrupted order, to the reassembly layer as to all other upper layers.
Hence there can never be more than one fragment chain pending reassembly at
any given time in a link, and we can trust (but still verify) that the
fragments will be chained up in the correct order.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 18:30:11 -05:00
Erik Hugne
528f6f4bf3 tipc: don't reroute message fragments
When a message fragment is received in a broadcast or unicast link,
the reception code will append the fragment payload to a big reassembly
buffer through a call to the function tipc_recv_fragm(). However, after
the return of that call, the logics goes on and passes the fragment
buffer to the function tipc_net_route_msg(), which will simply drop it.
This behavior is a remnant from the now obsolete multi-cluster
functionality, and has no relevance in the current code base.

Although currently harmless, this unnecessary call would be fatal
after applying the next patch in this series, which introduces
a completely new reassembly algorithm. So we change the code to
eliminate the redundant call.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 18:30:11 -05:00
Linus Torvalds
c224b76b56 NFS client updates for Linux 3.13
Highlights include:
 
 - Changes to the RPC socket code to allow NFSv4 to turn off timeout+retry
   - Detect TCP connection breakage through the "keepalive" mechanism
 - Add client side support for NFSv4.x migration (Chuck Lever)
 - Add support for multiple security flavour arguments to the "sec=" mount
   option (Dros Adamson)
 - fs-cache bugfixes from David Howells:
   - Fix an issue whereby caching can be enabled on a file that is open for
     writing
 - More NFSv4 open code stable bugfixes
 - Various Labeled NFS (selinux) bugfixes, including one stable fix
 - Fix buffer overflow checking in the RPCSEC_GSS upcall encoding
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSe8TEAAoJEGcL54qWCgDydu0QAJVtVhfwlUKm/HZ4oAy0Q5T8
 rJOWupqGnwyqTNLIRTlNegFSwMY+bABbkihXzSoj641o5zRb200KePlNxknzzlu1
 Q715035LDeEC1jrrHHeztTa9uWxAZ9B6gstMzilJYbV72VRYuWA6Q5LstXwQy/jN
 ViSldrGJ4sRZUe6wpNLPBRDBfOMWOtZdyRqqqjm71ZHJJnaqQWLBvThTG4MsLlpg
 j/khi5189MxJWePTKI9zGZdnXZAZ0ar1tAi1QWDNv044EwsS3LZZIko+YdBh6LZx
 9IBwk6TqOXFY0jxPDsIZtTfWPf4pjewRrPINMkjlZl3TJEf97sIlavZ7gWqvVIz5
 eXzFGy7D2XBgub8TGcmZM/7keHY/sqghz7lXZ8FulXlVem52r/95NiQ9tu8l8hq3
 Ab0FUnjtXeuaDFPBCHlKb3zmCMGFF89VqtpCj2plCPvfcGgJvXJqddWBRisQw9St
 UgD1PQWRFGtkrHv5EcQkd5boVdRNjAVAC9PaCWNpOpSVDjJyuUE+v/k75+ZwDcG8
 afAFMJSbCwRxW+cFlLAsQTfQztzuWTTOOVQvJDxfyYulcWshyIruhiYItRDfJqRp
 RynuVzrBERzUs5wsefnBbC218C/WSlOrodPbsZvdhKolvRx1RNtWT29ilZ6+p2tH
 4378ZRLtQvm9RXBnAkRc
 =gflJ
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - Changes to the RPC socket code to allow NFSv4 to turn off
     timeout+retry:
      * Detect TCP connection breakage through the "keepalive" mechanism
   - Add client side support for NFSv4.x migration (Chuck Lever)
   - Add support for multiple security flavour arguments to the "sec="
     mount option (Dros Adamson)
   - fs-cache bugfixes from David Howells:
     * Fix an issue whereby caching can be enabled on a file that is
       open for writing
   - More NFSv4 open code stable bugfixes
   - Various Labeled NFS (selinux) bugfixes, including one stable fix
   - Fix buffer overflow checking in the RPCSEC_GSS upcall encoding"

* tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
  NFSv4.2: Remove redundant checks in nfs_setsecurity+nfs4_label_init_security
  NFSv4: Sanity check the server reply in _nfs4_server_capabilities
  NFSv4.2: encode_readdir - only ask for labels when doing readdirplus
  nfs: set security label when revalidating inode
  NFSv4.2: Fix a mismatch between Linux labeled NFS and the NFSv4.2 spec
  NFS: Fix a missing initialisation when reading the SELinux label
  nfs: fix oops when trying to set SELinux label
  nfs: fix inverted test for delegation in nfs4_reclaim_open_state
  SUNRPC: Cleanup xs_destroy()
  SUNRPC: close a rare race in xs_tcp_setup_socket.
  SUNRPC: remove duplicated include from clnt.c
  nfs: use IS_ROOT not DCACHE_DISCONNECTED
  SUNRPC: Fix buffer overflow checking in gss_encode_v0_msg/gss_encode_v1_msg
  SUNRPC: gss_alloc_msg - choose _either_ a v0 message or a v1 message
  SUNRPC: remove an unnecessary if statement
  nfs: Use PTR_ERR_OR_ZERO in 'nfs/nfs4super.c'
  nfs: Use PTR_ERR_OR_ZERO in 'nfs41_callback_up' function
  nfs: Remove useless 'error' assignment
  sunrpc: comment typo fix
  SUNRPC: Add correct rcu_dereference annotation in rpc_clnt_set_transport
  ...
2013-11-08 05:57:46 +09:00
Linus Torvalds
0324e74534 Driver Core / sysfs patches for 3.13-rc1
Here's the big driver core / sysfs update for 3.13-rc1.
 
 There's lots of dev_groups updates for different subsystems, as they all
 get slowly migrated over to the safe versions of the attribute groups
 (removing userspace races with the creation of the sysfs files.)  Also
 in here are some kobject updates, devres expansions, and the first round
 of Tejun's sysfs reworking to enable it to be used by other subsystems
 as a backend for an in-kernel filesystem.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlJ6xAMACgkQMUfUDdst+yk1kQCfcHXhfnrvFZ5J/mDP509IzhNS
 ddEAoLEWoivtBppNsgrWqXpD1vi4UMsE
 =JmVW
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core / sysfs patches from Greg KH:
 "Here's the big driver core / sysfs update for 3.13-rc1.

  There's lots of dev_groups updates for different subsystems, as they
  all get slowly migrated over to the safe versions of the attribute
  groups (removing userspace races with the creation of the sysfs
  files.) Also in here are some kobject updates, devres expansions, and
  the first round of Tejun's sysfs reworking to enable it to be used by
  other subsystems as a backend for an in-kernel filesystem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (83 commits)
  sysfs: rename sysfs_assoc_lock and explain what it's about
  sysfs: use generic_file_llseek() for sysfs_file_operations
  sysfs: return correct error code on unimplemented mmap()
  mdio_bus: convert bus code to use dev_groups
  device: Make dev_WARN/dev_WARN_ONCE print device as well as driver name
  sysfs: separate out dup filename warning into a separate function
  sysfs: move sysfs_hash_and_remove() to fs/sysfs/dir.c
  sysfs: remove unused sysfs_get_dentry() prototype
  sysfs: honor bin_attr.attr.ignore_lockdep
  sysfs: merge sysfs_elem_bin_attr into sysfs_elem_attr
  devres: restore zeroing behavior of devres_alloc()
  sysfs: fix sysfs_write_file for bin file
  input: gameport: convert bus code to use dev_groups
  input: serio: remove bus usage of dev_attrs
  input: serio: use DEVICE_ATTR_RO()
  i2o: convert bus code to use dev_groups
  memstick: convert bus code to use dev_groups
  tifm: convert bus code to use dev_groups
  virtio: convert bus code to use dev_groups
  ipack: convert bus code to use dev_groups
  ...
2013-11-07 11:42:15 +09:00
John Stultz
5ac68e7c34 ipv6: Fix possible ipv6 seqlock deadlock
While enabling lockdep on seqlocks, I ran across the warning below
caused by the ipv6 stats being updated in both irq and non-irq context.

This patch changes from IP6_INC_STATS_BH to IP6_INC_STATS (suggested
by Eric Dumazet) to resolve this problem.

[   11.120383] =================================
[   11.121024] [ INFO: inconsistent lock state ]
[   11.121663] 3.12.0-rc1+ #68 Not tainted
[   11.122229] ---------------------------------
[   11.122867] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   11.123741] init/4483 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   11.124505]  (&stats->syncp.seq#6){+.?...}, at: [<c1ab80c2>] ndisc_send_ns+0xe2/0x130
[   11.125736] {SOFTIRQ-ON-W} state was registered at:
[   11.126447]   [<c10e0eb7>] __lock_acquire+0x5c7/0x1af0
[   11.127222]   [<c10e2996>] lock_acquire+0x96/0xd0
[   11.127925]   [<c1a9a2c3>] write_seqcount_begin+0x33/0x40
[   11.128766]   [<c1a9aa03>] ip6_dst_lookup_tail+0x3a3/0x460
[   11.129582]   [<c1a9e0ce>] ip6_dst_lookup_flow+0x2e/0x80
[   11.130014]   [<c1ad18e0>] ip6_datagram_connect+0x150/0x4e0
[   11.130014]   [<c1a4d0b5>] inet_dgram_connect+0x25/0x70
[   11.130014]   [<c198dd61>] SYSC_connect+0xa1/0xc0
[   11.130014]   [<c198f571>] SyS_connect+0x11/0x20
[   11.130014]   [<c198fe6b>] SyS_socketcall+0x12b/0x300
[   11.130014]   [<c1bbf880>] syscall_call+0x7/0xb
[   11.130014] irq event stamp: 1184
[   11.130014] hardirqs last  enabled at (1184): [<c1086901>] local_bh_enable+0x71/0x110
[   11.130014] hardirqs last disabled at (1183): [<c10868cd>] local_bh_enable+0x3d/0x110
[   11.130014] softirqs last  enabled at (0): [<c108014d>] copy_process.part.42+0x45d/0x11a0
[   11.130014] softirqs last disabled at (1147): [<c1086e05>] irq_exit+0xa5/0xb0
[   11.130014]
[   11.130014] other info that might help us debug this:
[   11.130014]  Possible unsafe locking scenario:
[   11.130014]
[   11.130014]        CPU0
[   11.130014]        ----
[   11.130014]   lock(&stats->syncp.seq#6);
[   11.130014]   <Interrupt>
[   11.130014]     lock(&stats->syncp.seq#6);
[   11.130014]
[   11.130014]  *** DEADLOCK ***
[   11.130014]
[   11.130014] 3 locks held by init/4483:
[   11.130014]  #0:  (rcu_read_lock){.+.+..}, at: [<c109363c>] SyS_setpriority+0x4c/0x620
[   11.130014]  #1:  (((&ifa->dad_timer))){+.-...}, at: [<c108c1c0>] call_timer_fn+0x0/0xf0
[   11.130014]  #2:  (rcu_read_lock){.+.+..}, at: [<c1ab6494>] ndisc_send_skb+0x54/0x5d0
[   11.130014]
[   11.130014] stack backtrace:
[   11.130014] CPU: 0 PID: 4483 Comm: init Not tainted 3.12.0-rc1+ #68
[   11.130014] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   11.130014]  00000000 00000000 c55e5c10 c1bb0e71 c57128b0 c55e5c4c c1badf79 c1ec1123
[   11.130014]  c1ec1484 00001183 00000000 00000000 00000001 00000003 00000001 00000000
[   11.130014]  c1ec1484 00000004 c5712dcc 00000000 c55e5c84 c10de492 00000004 c10755f2
[   11.130014] Call Trace:
[   11.130014]  [<c1bb0e71>] dump_stack+0x4b/0x66
[   11.130014]  [<c1badf79>] print_usage_bug+0x1d3/0x1dd
[   11.130014]  [<c10de492>] mark_lock+0x282/0x2f0
[   11.130014]  [<c10755f2>] ? kvm_clock_read+0x22/0x30
[   11.130014]  [<c10dd8b0>] ? check_usage_backwards+0x150/0x150
[   11.130014]  [<c10e0e74>] __lock_acquire+0x584/0x1af0
[   11.130014]  [<c10b1baf>] ? sched_clock_cpu+0xef/0x190
[   11.130014]  [<c10de58c>] ? mark_held_locks+0x8c/0xf0
[   11.130014]  [<c10e2996>] lock_acquire+0x96/0xd0
[   11.130014]  [<c1ab80c2>] ? ndisc_send_ns+0xe2/0x130
[   11.130014]  [<c1ab66d3>] ndisc_send_skb+0x293/0x5d0
[   11.130014]  [<c1ab80c2>] ? ndisc_send_ns+0xe2/0x130
[   11.130014]  [<c1ab80c2>] ndisc_send_ns+0xe2/0x130
[   11.130014]  [<c108cc32>] ? mod_timer+0xf2/0x160
[   11.130014]  [<c1aa706e>] ? addrconf_dad_timer+0xce/0x150
[   11.130014]  [<c1aa70aa>] addrconf_dad_timer+0x10a/0x150
[   11.130014]  [<c1aa6fa0>] ? addrconf_dad_completed+0x1c0/0x1c0
[   11.130014]  [<c108c233>] call_timer_fn+0x73/0xf0
[   11.130014]  [<c108c1c0>] ? __internal_add_timer+0xb0/0xb0
[   11.130014]  [<c1aa6fa0>] ? addrconf_dad_completed+0x1c0/0x1c0
[   11.130014]  [<c108c5b1>] run_timer_softirq+0x141/0x1e0
[   11.130014]  [<c1086b20>] ? __do_softirq+0x70/0x1b0
[   11.130014]  [<c1086b70>] __do_softirq+0xc0/0x1b0
[   11.130014]  [<c1086e05>] irq_exit+0xa5/0xb0
[   11.130014]  [<c106cfd5>] smp_apic_timer_interrupt+0x35/0x50
[   11.130014]  [<c1bbfbca>] apic_timer_interrupt+0x32/0x38
[   11.130014]  [<c10936ed>] ? SyS_setpriority+0xfd/0x620
[   11.130014]  [<c10e26c9>] ? lock_release+0x9/0x240
[   11.130014]  [<c10936d7>] ? SyS_setpriority+0xe7/0x620
[   11.130014]  [<c1bbee6d>] ? _raw_read_unlock+0x1d/0x30
[   11.130014]  [<c1093701>] SyS_setpriority+0x111/0x620
[   11.130014]  [<c109363c>] ? SyS_setpriority+0x4c/0x620
[   11.130014]  [<c1bbf880>] syscall_call+0x7/0xb

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06 12:40:28 +01:00
John Stultz
827da44c61 net: Explicitly initialize u64_stats_sync structures for lockdep
In order to enable lockdep on seqcount/seqlock structures, we
must explicitly initialize any locks.

The u64_stats_sync structure, uses a seqcount, and thus we need
to introduce a u64_stats_init() function and use it to initialize
the structure.

This unfortunately adds a lot of fairly trivial initialization code
to a number of drivers. But the benefit of ensuring correctness makes
this worth while.

Because these changes are required for lockdep to be enabled, and the
changes are quite trivial, I've not yet split this patch out into 30-some
separate patches, as I figured it would be better to get the various
maintainers thoughts on how to best merge this change along with
the seqcount lockdep enablement.

Feedback would be appreciated!

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Roger Luethi <rl@hellgate.ch>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Simon Horman <horms@verge.net.au>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06 12:40:25 +01:00
Duan Jiong
249a3630c4 ipv6: drop the judgement in rt6_alloc_cow()
Now rt6_alloc_cow() is only called by ip6_pol_route() when
rt->rt6i_flags doesn't contain both RTF_NONEXTHOP and RTF_GATEWAY,
and rt->rt6i_flags hasn't been changed in ip6_rt_copy().
So there is no neccessary to judge whether rt->rt6i_flags contains
RTF_GATEWAY or not.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 22:17:05 -05:00
Hannes Frederic Sowa
0e033e04c2 ipv6: fix headroom calculation in udp6_ufo_fragment
Commit 1e2bd517c1 ("udp6: Fix udp
fragmentation for tunnel traffic.") changed the calculation if
there is enough space to include a fragment header in the skb from a
skb->mac_header dervived one to skb_headroom. Because we already peeled
off the skb to transport_header this is wrong. Change this back to check
if we have enough room before the mac_header.

This fixes a panic Saran Neti reported. He used the tbf scheduler which
skb_gso_segments the skb. The offsets get negative and we panic in memcpy
because the skb was erroneously not expanded at the head.

Reported-by: Saran Neti <Saran.Neti@telus.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 22:09:53 -05:00
Hannes Frederic Sowa
482fc6094a ipv4: introduce new IP_MTU_DISCOVER mode IP_PMTUDISC_INTERFACE
Sockets marked with IP_PMTUDISC_INTERFACE won't do path mtu discovery,
their sockets won't accept and install new path mtu information and they
will always use the interface mtu for outgoing packets. It is guaranteed
that the packet is not fragmented locally. But we won't set the DF-Flag
on the outgoing frames.

Florian Weimer had the idea to use this flag to ensure DNS servers are
never generating outgoing fragments. They may well be fragmented on the
path, but the server never stores or usees path mtu values, which could
well be forged in an attack.

(The root of the problem with path MTU discovery is that there is
no reliable way to authenticate ICMP Fragmentation Needed But DF Set
messages because they are sent from intermediate routers with their
source addresses, and the IMCP payload will not always contain sufficient
information to identify a flow.)

Recent research in the DNS community showed that it is possible to
implement an attack where DNS cache poisoning is feasible by spoofing
fragments. This work was done by Amir Herzberg and Haya Shulman:
<https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf>

This issue was previously discussed among the DNS community, e.g.
<http://www.ietf.org/mail-archive/web/dnsext/current/msg01204.html>,
without leading to fixes.

This patch depends on the patch "ipv4: fix DO and PROBE pmtu mode
regarding local fragmentation with UFO/CORK" for the enforcement of the
non-fragmentable checks. If other users than ip_append_page/data should
use this semantic too, we have to add a new flag to IPCB(skb)->flags to
suppress local fragmentation and check for this in ip_finish_output.

Many thanks to Florian Weimer for the idea and feedback while implementing
this patch.

Cc: David S. Miller <davem@davemloft.net>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 21:52:27 -05:00
John W. Linville
33b443422e Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2013-11-05 15:50:22 -05:00
John W. Linville
b476d3f143 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2013-11-05 15:49:16 -05:00
John W. Linville
353c78152c Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Conflicts:
	net/wireless/reg.c
2013-11-05 15:49:02 -05:00
Florent Fourcot
b579035ff7 ipv6: remove old conditions on flow label sharing
The code of flow label in Linux Kernel follows
the rules of RFC 1809 (an informational one) for
conditions on flow label sharing. There rules are
not in the last proposed standard for flow label
(RFC 6437), or in the previous one (RFC 3697).

Since this code does not follow any current or
old standard, we can remove it.

With this removal, the ipv6_opt_cmp function is
now a dead code and it can be removed too.

Changelog to v1:
 * add justification for the change
 * remove the condition on IPv6 options

[ Remove ipv6_hdr_cmp and it is now unused as well. -DaveM ]

Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 14:40:53 -05:00
David S. Miller
cfce0a2b61 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
Please accept the following pull request intended for the 3.13 tree...

I had intended to pass most of these to you as much as two weeks ago.
Unfortunately, I failed to account for the effects of bad Internet
connections and my own fatique/laziness while traveling.  On the bright
side, at least these have been baking in linux-next for some time!

For the mac80211 bits, Johannes says:

"This time I have two fixes for P2P (which requires not using CCK rates)
and a workaround for APs with broken WMM information."

For the iwlwifi bits, Johannes says:

"I have a few fixes for warnings/issues: one from Alex, fixing scan
timings, one from Emmanuel fixing a WARN_ON in the DVM driver, one from
Stanislaw removing a trigger-happy WARN_ON in the MVM driver and a
change from myself to try to recover when the device isn't processing
commands quickly."

And:

"For this round, I have a lot of changes:
 * power management improvements
 * BT coexistence improvements/updates
 * new device support
 * VHT support
 * IBSS support (though due to a small bug it requires new firmware)
 * various other fixes/improvements."

For the Bluetooth bits, Gustavo says:

"More patches for 3.12, busy times for Bluetooth. More than a 100 commits since
the last pull. The bulk of work comes from Johan and Marcel, they are doing
fixes and improvements all over the Bluetooth subsystem, as the diffstat can
show."

For the ath10k and ath6kl bits, Kalle says:

"Bartosz added support to ath10k for our 10.x AP firmware branch, which
gives us AP specific features and fixes. We still support the main
firmware branch as well just like before, ath10k detects runtime what
firmware is used. Unfortunately the firmware interface in 10.x branch is
somewhat different so there was quite a lot of changes in ath10k for
this.

Michal and Sujith did some performance improvements in ath10k. Vladimir
fixed a compiler warning and Fengguang removed an extra semicolon."

For the NFC bits, Samuel says:

"It's a fairly big one, with the following highlights:

- NFC digital layer implementation: Most NFC chipsets implement the NFC
  digital layer in firmware, but others have more basic functionalities
  and expect the host to implement the digital layer. This layer sits
  below the NFC core.

- Sony's port100 support: This is "soft" NFC USB dongle that expects the
  digital layer to be implemented on the host. This is the first user of
  our NFC digital stack implementation.

- Secure element API: We now provide a netlink API for enabling,
  disabling and discovering NFC attached (embedded or UICC ones) secure
  elements. With some userspace help, this allows us to support NFC
  payments.
  Only the pn544 driver currently supports that API.

- NCI SPI fixes and improvements: In order to support NCI devices over
  SPI, we fixed and improved our NCI/SPI implementation. The currently
  most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
  and we're planning to use our NCI/SPI framework to implement a
  driver for it.

- pn533 fragmentation support in target mode: This was the only missing
  feature from our pn533 impementation. We now support fragmentation in
  both Tx and Rx modes, in target mode."

On top of all that, brcmfmac and rt2x00 both get the usual flurry
of updates.  A few other drivers get hit here or there as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 02:34:57 -05:00
Jason Wang
f8e617e100 net: introduce skb_coalesce_rx_frag()
Sometimes we need to coalesce the rx frags to avoid frag list. One example is
virtio-net driver which tries to use small frags for both MTU sized packet and
GSO packet. So this patch introduce skb_coalesce_rx_frag() to do this.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael Dalton <mwdalton@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 20:03:52 -05:00
Yuchung Cheng
9f9843a751 tcp: properly handle stretch acks in slow start
Slow start now increases cwnd by 1 if an ACK acknowledges some packets,
regardless the number of packets. Consequently slow start performance
is highly dependent on the degree of the stretch ACKs caused by
receiver or network ACK compression mechanisms (e.g., delayed-ACK,
GRO, etc).  But slow start algorithm is to send twice the amount of
packets of packets left so it should process a stretch ACK of degree
N as if N ACKs of degree 1, then exits when cwnd exceeds ssthresh. A
follow up patch will use the remainder of the N (if greater than 1)
to adjust cwnd in the congestion avoidance phase.

In addition this patch retires the experimental limited slow start
(LSS) feature. LSS has multiple drawbacks but questionable benefit. The
fractional cwnd increase in LSS requires a loop in slow start even
though it's rarely used. Configuring such an increase step via a global
sysctl on different BDPS seems hard. Finally and most importantly the
slow start overshoot concern is now better covered by the Hybrid slow
start (hystart) enabled by default.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 19:57:59 -05:00
Yuchung Cheng
0d41cca490 tcp: enable sockets to use MSG_FASTOPEN by default
Applications have started to use Fast Open (e.g., Chrome browser has
such an optional flag) and the feature has gone through several
generations of kernels since 3.7 with many real network tests. It's
time to enable this flag by default for applications to test more
conveniently and extensively.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 19:57:47 -05:00
David S. Miller
f8785c5514 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nftables
Pablo Neira Ayuso says:

====================
This batch contains fives nf_tables patches for your net-next tree,
they are:

* Fix possible use after free in the module removal path of the
  x_tables compatibility layer, from Dan Carpenter.

* Add filter chain type for the bridge family, from myself.

* Fix Kconfig dependencies of the nf_tables bridge family with
  the core, from myself.

* Fix sparse warnings in nft_nat, from Tomasz Bursztyka.

* Remove duplicated include in the IPv4 family support for nf_tables,
  from Wei Yongjun.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 19:48:57 -05:00
David S. Miller
72c39a0ade Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
This is another batch containing Netfilter/IPVS updates for your net-next
tree, they are:

* Six patches to make the ipt_CLUSTERIP target support netnamespace,
  from Gao feng.

* Two cleanups for the nf_conntrack_acct infrastructure, introducing
  a new structure to encapsulate conntrack counters, from Holger
  Eitzenberger.

* Fix missing verdict in SCTP support for IPVS, from Daniel Borkmann.

* Skip checksum recalculation in SCTP support for IPVS, also from
  Daniel Borkmann.

* Fix behavioural change in xt_socket after IP early demux, from
  Florian Westphal.

* Fix bogus large memory allocation in the bitmap port set type in ipset,
  from Jozsef Kadlecsik.

* Fix possible compilation issues in the hash netnet set type in ipset,
  also from Jozsef Kadlecsik.

* Define constants to identify netlink callback data in ipset dumps,
  again from Jozsef Kadlecsik.

* Use sock_gen_put() in xt_socket to replace xt_socket_put_sk,
  from Eric Dumazet.

* Improvements for the SH scheduler in IPVS, from Alexander Frolkin.

* Remove extra delay due to unneeded rcu barrier in IPVS net namespace
  cleanup path, from Julian Anastasov.

* Save some cycles in ip6t_REJECT by skipping checksum validation in
  packets leaving from our stack, from Stanislav Fomichev.

* Fix IPVS_CMD_ATTR_MAX definition in IPVS, larger that required, from
  Julian Anastasov.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 19:46:58 -05:00
Dan Carpenter
c359c4157c netfilter: nft_compat: use _safe version of list_for_each
We need to use the _safe version of list_for_each_entry() here otherwise
we have a use after free bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-04 22:58:30 +01:00
David S. Miller
6fcf018ae4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
Jesse Gross says:

====================
Open vSwitch

A set of updates for net-next/3.13. Major changes are:
 * Restructure flow handling code to be more logically organized and
   easier to read.
 * Rehashing of the flow table is moved from a workqueue to flow
   installation time. Before, heavy load could block the workqueue for
   excessive periods of time.
 * Additional debugging information is provided to help diagnose megaflows.
 * It's now possible to match on TCP flags.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 16:25:04 -05:00
Daniel Borkmann
cea80ea8d2 net: checksum: fix warning in skb_checksum
This patch fixes a build warning in skb_checksum() by wrapping the
csum_partial() usage in skb_checksum(). The problem is that on a few
architectures, csum_partial is used with prefix asmlinkage whereas
on most architectures it's not. So fix this up generically as we did
with csum_block_add_ext() to match the signature. Introduced by
2817a336d4 ("net: skb_checksum: allow custom update/combine for
walking skb").

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 15:27:08 -05:00
John W. Linville
87bc0728d4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
2013-11-04 14:51:28 -05:00
John W. Linville
01925efdf7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
	drivers/net/wireless/iwlwifi/pcie/drv.c
2013-11-04 14:45:14 -05:00
David S. Miller
394efd19d5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be.h
	drivers/net/netconsole.c
	net/bridge/br_private.h

Three mostly trivial conflicts.

The net/bridge/br_private.h conflict was a function signature (argument
addition) change overlapping with the extern removals from Joe Perches.

In drivers/net/netconsole.c we had one change adjusting a printk message
whilst another changed "printk(KERN_INFO" into "pr_info(".

Lastly, the emulex change was a new inline function addition overlapping
with Joe Perches's extern removals.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 13:48:30 -05:00
Daniel Borkmann
7926c1d5be net: sctp: do not trigger BUG_ON in sctp_cmd_delete_tcb
Introduced in f9e42b8535 ("net: sctp: sideeffect: throw BUG if
primary_path is NULL"), we intended to find a buggy assoc that's
part of the assoc hash table with a primary_path that is NULL.
However, we better remove the BUG_ON for now and find a more
suitable place to assert for these things as Mark reports that
this also triggers the bug when duplication cookie processing
happens, and the assoc is not part of the hash table (so all
good in this case). Such a situation can for example easily be
reproduced by:

  tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 1 1 1 1 1 1
  tc qdisc add dev eth0 parent 1:2 handle 20: netem loss 20%
  tc filter add dev eth0 protocol ip parent 1: prio 2 u32 match ip \
            protocol 132 0xff match u8 0x0b 0xff at 32 flowid 1:2

This drops 20% of COOKIE-ACK packets. After some follow-up
discussion with Vlad we came to the conclusion that for now we
should still better remove this BUG_ON() assertion, and come up
with two follow-ups later on, that is, i) find a more suitable
place for this assertion, and possibly ii) have a special
allocator/initializer for such kind of temporary assocs.

Reported-by: Mark Thomas <Mark.Thomas@metaswitch.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 00:46:44 -05:00
Arvid Brodin
f421436a59 net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)
High-availability Seamless Redundancy ("HSR") provides instant failover
redundancy for Ethernet networks. It requires a special network topology where
all nodes are connected in a ring (each node having two physical network
interfaces). It is suited for applications that demand high availability and
very short reaction time.

HSR acts on the Ethernet layer, using a registered Ethernet protocol type to
send special HSR frames in both directions over the ring. The driver creates
virtual network interfaces that can be used just like any ordinary Linux
network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring
must be HSR capable.

This code is a "best effort" to comply with the HSR standard as described in
IEC 62439-3:2010 (HSRv0).

Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 23:20:14 -05:00
Eric Dumazet
74d332c13b net: extend net_device allocation to vmalloc()
Joby Poriyath provided a xen-netback patch to reduce the size of
xenvif structure as some netdev allocation could fail under
memory pressure/fragmentation.

This patch is handling the problem at the core level, allowing
any netdev structures to use vmalloc() if kmalloc() failed.

As vmalloc() adds overhead on a critical network path, add __GFP_REPEAT
to kzalloc() flags to do this fallback only when really needed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Joby Poriyath <joby.poriyath@citrix.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 23:19:00 -05:00
Daniel Borkmann
e6d8b64b34 net: sctp: fix and consolidate SCTP checksumming code
This fixes an outstanding bug found through IPVS, where SCTP packets
with skb->data_len > 0 (non-linearized) and empty frag_list, but data
accumulated in frags[] member, are forwarded with incorrect checksum
letting SCTP initial handshake fail on some systems. Linearizing each
SCTP skb in IPVS to prevent that would not be a good solution as
this leads to an additional and unnecessary performance penalty on
the load-balancer itself for no good reason (as we actually only want
to update the checksum, and can do that in a different/better way
presented here).

The actual problem is elsewhere, namely, that SCTP's checksumming
in sctp_compute_cksum() does not take frags[] into account like
skb_checksum() does. So while we are fixing this up, we better reuse
the existing code that we have anyway in __skb_checksum() and use it
for walking through the data doing checksumming. This will not only
fix this issue, but also consolidates some SCTP code with core
sk_buff code, bringing it closer together and removing respectively
avoiding reimplementation of skb_checksum() for no good reason.

As crc32c() can use hardware implementation within the crypto layer,
we leave that intact (it wraps around / falls back to e.g. slice-by-8
algorithm in __crc32c_le() otherwise); plus use the __crc32c_le_combine()
combinator for crc32c blocks.

Also, we remove all other SCTP checksumming code, so that we only
have to use sctp_compute_cksum() from now on; for doing that, we need
to transform SCTP checkumming in output path slightly, and can leave
the rest intact.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 23:04:57 -05:00
Daniel Borkmann
2817a336d4 net: skb_checksum: allow custom update/combine for walking skb
Currently, skb_checksum walks over 1) linearized, 2) frags[], and
3) frag_list data and calculats the one's complement, a 32 bit
result suitable for feeding into itself or csum_tcpudp_magic(),
but unsuitable for SCTP as we're calculating CRC32c there.

Hence, in order to not re-implement the very same function in
SCTP (and maybe other protocols) over and over again, use an
update() + combine() callback internally to allow for walking
over the skb with different algorithms.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 23:04:57 -05:00
Wei Yongjun
ca0e8bd68b netfilter: nf_tables: remove duplicated include from nf_tables_ipv4.c
Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-03 22:36:25 +01:00
Holger Eitzenberger
4542fa4727 netfilter: ctnetlink: account both directions in one step
With the intent to dump other accounting data later.
This patch is a cleanup.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-03 21:49:32 +01:00
Holger Eitzenberger
f7b13e4330 netfilter: introduce nf_conn_acct structure
Encapsulate counters for both directions into nf_conn_acct. During
that process also consistently name pointers to the extend 'acct',
not 'counters'. This patch is a cleanup.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-11-03 21:48:49 +01:00
Jason Wang
6f09234385 net: flow_dissector: fail on evil iph->ihl
We don't validate iph->ihl which may lead a dead loop if we meet a IPIP
skb whose iph->ihl is zero. Fix this by failing immediately when iph->ihl
is evil (less than 5).

This issue were introduced by commit ec5efe7946
(rps: support IPIP encapsulation).

Cc: Eric Dumazet <edumazet@google.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02 02:16:07 -04:00
David S. Miller
296c10639a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Conflicts:
	net/xfrm/xfrm_policy.c

Minor merge conflict in xfrm_policy.c, consisting of overlapping
changes which were trivial to resolve.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02 02:13:48 -04:00
David S. Miller
2e19ef0251 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
1) Fix a possible race on ipcomp scratch buffers because
   of too early enabled siftirqs. From Michal Kubecek.

2) The current xfrm garbage collector threshold is too small
   for some workloads, resulting in bad performance on these
   workloads. Increase the threshold from 1024 to 32768.

3) Some codepaths might not have a dst_entry attached to the
   skb when calling xfrm_decode_session(). So add a check
   to prevent a null pointer dereference in this case.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02 01:22:39 -04:00
Pravin B Shelar
8ddd094675 openvswitch: Use flow hash during flow lookup operation.
Flow->hash can be used to detect hash collisions and avoid flow key
compare in flow lookup.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01 18:43:46 -07:00
Jarno Rajahalme
5eb26b156e openvswitch: TCP flags matching support.
tcp_flags=flags/mask
        Bitwise  match on TCP flags.  The flags and mask are 16-bit num‐
        bers written in decimal or in hexadecimal prefixed by 0x.   Each
        1-bit  in  mask requires that the corresponding bit in port must
        match.  Each 0-bit in mask causes the corresponding  bit  to  be
        ignored.

        TCP  protocol  currently  defines  9 flag bits, and additional 3
        bits are reserved (must be transmitted as zero), see  RFCs  793,
        3168, and 3540.  The flag bits are, numbering from the least
        significant bit:

        0: FIN No more data from sender.

        1: SYN Synchronize sequence numbers.

        2: RST Reset the connection.

        3: PSH Push function.

        4: ACK Acknowledgement field significant.

        5: URG Urgent pointer field significant.

        6: ECE ECN Echo.

        7: CWR Congestion Windows Reduced.

        8: NS  Nonce Sum.

        9-11:  Reserved.

        12-15: Not matchable, must be zero.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01 18:43:45 -07:00
Jarno Rajahalme
df23e9f642 openvswitch: Widen TCP flags handling.
Widen TCP flags handling from 7 bits (uint8_t) to 12 bits (uint16_t).
The kernel interface remains at 8 bits, which makes no functional
difference now, as none of the higher bits is currently of interest
to the userspace.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01 18:43:45 -07:00
Pravin B Shelar
3cdb35b074 openvswitch: Enable all GSO features on internal port.
OVS already can handle all types of segmentation offloads that
are supported by the kernel.
Following patch specifically enables UDP and IPV6 segmentation
offloads.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01 18:17:50 -07:00
Ingo Molnar
fb10d5b7ef Merge branch 'linus' into sched/core
Resolve cherry-picking conflicts:

Conflicts:
	mm/huge_memory.c
	mm/memory.c
	mm/mprotect.c

See this upstream merge commit for more details:

  52469b4fcd Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-01 08:24:41 +01:00
Steffen Klassert
84502b5ef9 xfrm: Fix null pointer dereference when decoding sessions
On some codepaths the skb does not have a dst entry
when xfrm_decode_session() is called. So check for
a valid skb_dst() before dereferencing the device
interface index. We use 0 as the device index if
there is no valid skb_dst(), or at reverse decoding
we use skb_iif as device interface index.

Bug was introduced with git commit bafd4bd4dc
("xfrm: Decode sessions with output interface.").

Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-11-01 07:08:46 +01:00
Trond Myklebust
a1311d87fa SUNRPC: Cleanup xs_destroy()
There is no longer any need for a separate xs_local_destroy() helper.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-31 09:31:17 -04:00
NeilBrown
93dc41bdc5 SUNRPC: close a rare race in xs_tcp_setup_socket.
We have one report of a crash in xs_tcp_setup_socket.
The call path to the crash is:

  xs_tcp_setup_socket -> inet_stream_connect -> lock_sock_nested.

The 'sock' passed to that last function is NULL.

The only way I can see this happening is a concurrent call to
xs_close:

  xs_close -> xs_reset_transport -> sock_release -> inet_release

inet_release sets:
   sock->sk = NULL;
inet_stream_connect calls
   lock_sock(sock->sk);
which gets NULL.

All calls to xs_close are protected by XPRT_LOCKED as are most
activations of the workqueue which runs xs_tcp_setup_socket.
The exception is xs_tcp_schedule_linger_timeout.

So presumably the timeout queued by the later fires exactly when some
other code runs xs_close().

To protect against this we can move the cancel_delayed_work_sync()
call from xs_destory() to xs_close().

As xs_close is never called from the worker scheduled on
->connect_worker, this can never deadlock.

Signed-off-by: NeilBrown <neilb@suse.de>
[Trond: Make it safe to call cancel_delayed_work_sync() on AF_LOCAL sockets]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-31 09:14:50 -04:00
Alexander Aring
3582b900ad 6lowpan: cleanup skb copy data
This patch drops the direct memcpy on skb and uses the right skb
memcpy functions. Also remove an unnecessary check if plen is non zero.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:46 -04:00
Alexander Aring
578d524127 6lowpan: set 6lowpan network and transport header
This is necessary to access network header with the skb_network_header
function instead of calculate the position with mac_len, etc.
Do the same for the transport header, when we replace the IPv6 header
with the 6LoWPAN header.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:46 -04:00
Alexander Aring
3e69162ea4 6lowpan: set and use mac_len for mac header length
Set the mac header length while creating the 802.15.4 mac header.

Drop the function for recalculate mac header length in upper layers
which was static and works for intra pan communication only.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:46 -04:00
Alexander Aring
3961532fd4 6lowpan: remove unnecessary set of headers
On receiving side we don't need to set any headers in skb because the
6LoWPAN layer do not access it. Currently these values will set twice
after calling netif_rx.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:45 -04:00
Duan Jiong
ba4865027c ipv6: remove the unnecessary statement in find_match()
After reading the function rt6_check_neigh(), we can
know that the RT6_NUD_FAIL_SOFT can be returned only
when the IS_ENABLE(CONFIG_IPV6_ROUTER_PREF) is false.
so in function find_match(), there is no need to execute
the statement !IS_ENABLED(CONFIG_IPV6_ROUTER_PREF).

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:06:51 -04:00
Chen Weilong
83a1a7ce60 mac802154: Use pr_err(...) rather than printk(KERN_ERR ...)
This change is inspired by checkpatch.

Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:05:44 -04:00
Ying Xue
3af390e2c5 tipc: remove two indentation levels in tipc_recv_msg routine
The message dispatching part of tipc_recv_msg() is wrapped layers of
while/if/if/switch, causing out-of-control indentation and does not
look very good. We reduce two indentation levels by separating the
message dispatching from the blocks that checks link state and
sequence numbers, allowing longer function and arg names to be
consistently indented without wrapping. Additionally we also rename
"cont" label to "discard" and add one new label called "unlock_discard"
to make code clearer. In all, these are cosmetic changes that do not
alter the operation of TIPC in any way.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Andreas Bofjäll <andreas.bofjall@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 16:54:54 -04:00
Wei Yongjun
09c3e54635 SUNRPC: remove duplicated include from clnt.c
Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-30 11:13:34 -04:00
Vinod Koul
f0dad6e701 Merge branch 'dma_complete' into next 2013-10-30 15:42:19 +05:30
Yuchung Cheng
c968601d17 tcp: temporarily disable Fast Open on SYN timeout
Fast Open currently has a fall back feature to address SYN-data being
dropped but it requires the middle-box to pass on regular SYN retry
after SYN-data. This is implemented in commit aab487435 ("net-tcp:
Fast Open client - detecting SYN-data drops")

However some NAT boxes will drop all subsequent packets after first
SYN-data and blackholes the entire connections.  An example is in
commit 356d7d8 "netfilter: nf_conntrack: fix tcp_in_window for Fast
Open".

The sender should note such incidents and fall back to use the regular
TCP handshake on subsequent attempts temporarily as well: after the
second SYN timeouts the original Fast Open SYN is most likely lost.
When such an event recurs Fast Open is disabled based on the number of
recurrences exponentially.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 22:50:41 -04:00
Daniel Borkmann
97203abe6b net: ipvs: sctp: do not recalc sctp csum when ports didn't change
Unlike UDP or TCP, we do not take the pseudo-header into
account in SCTP checksums. So in case port mapping is the
very same, we do not need to recalculate the whole SCTP
checksum in software, which is very expensive.

Also, similarly as in TCP, take into account when a private
helper mangled the packet. In that case, we also need to
recalculate the checksum even if ports might be same.

Thanks for feedback regarding skb->ip_summed checks from
Julian Anastasov; here's a discussion on these checks for
snat and dnat:

* For snat_handler(), we can see CHECKSUM_PARTIAL from
  virtual devices, and from LOCAL_OUT, otherwise it
  should be CHECKSUM_UNNECESSARY. In general, in snat it
  is more complex. skb contains the original route and
  ip_vs_route_me_harder() can change the route after
  snat_handler. So, for locally generated replies from
  local server we can not preserve the CHECKSUM_PARTIAL
  mode. It is an chicken or egg dilemma: snat_handler
  needs the device after rerouting (to check for
  NETIF_F_SCTP_CSUM), while ip_route_me_harder() wants
  the snat_handler() to put the new saddr for proper
  rerouting.

* For dnat_handler(), we should not see CHECKSUM_COMPLETE
  for SCTP, in fact the small set of drivers that support
  SCTP offloading return CHECKSUM_UNNECESSARY on correctly
  received SCTP csum. We can see CHECKSUM_PARTIAL from
  local stack or received from virtual drivers. The idea is
  that SCTP decides to avoid csum calculation if hardware
  supports offloading. IPVS can change the device after
  rerouting to real server but we can preserve the
  CHECKSUM_PARTIAL mode if the new device supports
  offloading too. This works because skb dst is changed
  before dnat_handler and we see the new device. So, checks
  in the 'if' part will decide whether it is ok to keep
  CHECKSUM_PARTIAL for the output. If the packet was with
  CHECKSUM_NONE, hence we deal with unknown checksum. As we
  recalculate the sum for IP header in all cases, it should
  be safe to use CHECKSUM_UNNECESSARY. We can forward wrong
  checksum in this case (without cp->app). In case of
  CHECKSUM_UNNECESSARY, the csum was valid on receive.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2013-10-30 09:48:16 +09:00
Vlad Yasevich
06499098a0 bridge: pass correct vlan id to multicast code
Currently multicast code attempts to extrace the vlan id from
the skb even when vlan filtering is disabled.  This can lead
to mdb entries being created with the wrong vlan id.
Pass the already extracted vlan id to the multicast
filtering code to make the correct id is used in
creation as well as lookup.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 17:40:08 -04:00
David S. Miller
911aeb1084 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
Jesse Gross says:

====================
One patch for net/3.12 fixing an issue where devices could be in an
invalid state they are removed while still attached to OVS.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 17:36:39 -04:00
Michael Drüing
706e282b69 net: x25: Fix dead URLs in Kconfig
Update the URLs in the Kconfig file to the new pages at sangoma.com and cisco.com

Signed-off-by: Michael Drüing <michael@drueing.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 17:35:17 -04:00
Daniel Borkmann
7d1d65cb84 net: sched: cls_bpf: add BPF-based classifier
This work contains a lightweight BPF-based traffic classifier that can
serve as a flexible alternative to ematch-based tree classification, i.e.
now that BPF filter engine can also be JITed in the kernel. Naturally, tc
actions and policies are supported as well with cls_bpf. Multiple BPF
programs/filter can be attached for a class, or they can just as well be
written within a single BPF program, that's really up to the user how he
wishes to run/optimize the code, e.g. also for inversion of verdicts etc.
The notion of a BPF program's return/exit codes is being kept as follows:

     0: No match
    -1: Select classid given in "tc filter ..." command
  else: flowid, overwrite the default one

As a minimal usage example with iproute2, we use a 3 band prio root qdisc
on a router with sfq each as leave, and assign ssh and icmp bpf-based
filters to band 1, http traffic to band 2 and the rest to band 3. For the
first two bands we load the bytecode from a file, in the 2nd we load it
inline as an example:

echo 1 > /proc/sys/net/core/bpf_jit_enable

tc qdisc del dev em1 root
tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

tc qdisc add dev em1 parent 1:1 sfq perturb 16
tc qdisc add dev em1 parent 1:2 sfq perturb 16
tc qdisc add dev em1 parent 1:3 sfq perturb 16

tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2
tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3

BPF programs can be easily created and passed to tc, either as inline
'bytecode' or 'bytecode-file'. There are a couple of front-ends that can
compile opcodes, for example:

1) People familiar with tcpdump-like filters:

   tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf

2) People that want to low-level program their filters or use BPF
   extensions that lack support by libpcap's compiler:

   bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf

   ssh.ops example code:
   ldh [12]
   jne #0x800, drop
   ldb [23]
   jneq #6, drop
   ldh [20]
   jset #0x1fff, drop
   ldxb 4 * ([14] & 0xf)
   ldh [%x + 14]
   jeq #0x16, pass
   ldh [%x + 16]
   jne #0x16, drop
   pass: ret #-1
   drop: ret #0

It was chosen to load bytecode into tc, since the reverse operation,
tc filter list dev em1, is then able to show the exact commands again.
Possible follow-up work could also include a small expression compiler
for iproute2. Tested with the help of bmon. This idea came up during
the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from
Eric Dumazet!

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 17:33:17 -04:00
David S. Miller
68783ec73c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
This pull request contains the following netfilter fix:

* fix --queue-bypass in xt_NFQUEUE revision 3. While adding the
  revision 3 of this target, the bypass flags were not correctly
  handled anymore, thus, breaking packet bypassing if no application
  is listening from userspace, patch from Holger Eitzenberger,
  reported by Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 16:53:44 -04:00
Holger Eitzenberger
d954777324 netfilter: xt_NFQUEUE: fix --queue-bypass regression
V3 of the NFQUEUE target ignores the --queue-bypass flag,
causing packets to be dropped when the userspace listener
isn't running.

Regression is in since 8746ddcf12 ("netfilter: xt_NFQUEUE:
introduce CPU fanout").

Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-29 13:05:54 +01:00
Mathias Krause
1c5ad13f7c net: esp{4,6}: get rid of struct esp_data
struct esp_data consists of a single pointer, vanishing the need for it
to be a structure. Fold the pointer into 'data' direcly, removing one
level of pointer indirection.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29 06:39:42 +01:00
Mathias Krause
123b0d1ba0 net: esp{4,6}: remove padlen from struct esp_data
The padlen member of struct esp_data is always zero. Get rid of it.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29 06:39:42 +01:00
Zhi Yong Wu
cdfb97bc01 net, mc: fix the incorrect comments in two mc-related functions
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 00:19:05 -04:00
Zhi Yong Wu
ab1a2d7773 net, iovec: fix the incorrect comment in memcpy_fromiovecend()
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 00:19:04 -04:00
Zhi Yong Wu
c4e819d16c net, datagram: fix the incorrect comment in zerocopy_sg_from_iovec()
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 00:19:04 -04:00
Hannes Frederic Sowa
daba287b29 ipv4: fix DO and PROBE pmtu mode regarding local fragmentation with UFO/CORK
UFO as well as UDP_CORK do not respect IP_PMTUDISC_DO and
IP_PMTUDISC_PROBE well enough.

UFO enabled packet delivery just appends all frags to the cork and hands
it over to the network card. So we just deliver non-DF udp fragments
(DF-flag may get overwritten by hardware or virtual UFO enabled
interface).

UDP_CORK does enqueue the data until the cork is disengaged. At this
point it sets the correct IP_DF and local_df flags and hands it over to
ip_fragment which in this case will generate an icmp error which gets
appended to the error socket queue. This is not reflected in the syscall
error (of course, if UFO is enabled this also won't happen).

Improve this by checking the pmtudisc flags before appending data to the
socket and if we still can fit all data in one packet when IP_PMTUDISC_DO
or IP_PMTUDISC_PROBE is set, only then proceed.

We use (mtu-fragheaderlen) to check for the maximum length because we
ensure not to generate a fragment and non-fragmented data does not need
to have its length aligned on 64 bit boundaries. Also the passed in
ip_options are already aligned correctly.

Maybe, we can relax some other checks around ip_fragment. This needs
more research.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 00:15:22 -04:00
Eric Dumazet
0d08c42cf9 tcp: gso: fix truesize tracking
commit 6ff50cd555 ("tcp: gso: do not generate out of order packets")
had an heuristic that can trigger a warning in skb_try_coalesce(),
because skb->truesize of the gso segments were exactly set to mss.

This breaks the requirement that

skb->truesize >= skb->len + truesizeof(struct sk_buff);

It can trivially be reproduced by :

ifconfig lo mtu 1500
ethtool -K lo tso off
netperf

As the skbs are looped into the TCP networking stack, skb_try_coalesce()
warns us of these skb under-estimating their truesize.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29 00:04:47 -04:00
David S. Miller
5d9efa7ee9 ipv6: Remove privacy config option.
The code for privacy extentions is very mature, and making it
configurable only gives marginal memory/code savings in exchange
for obfuscation and hard to read code via CPP ifdef'ery.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 20:07:50 -04:00
Alexander Aring
8ef007fd1d 6lowpan: remove unnecessary break
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:52 -04:00
Alexander Aring
b236b954de 6lowpan: remove skb->dev assignment
This patch removes the assignment of skb->dev. We don't need it here because
we use the netdev_alloc_skb_ip_align function which already sets the
skb->dev.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:52 -04:00
Alexander Aring
b614442f34 6lowpan: use netdev_alloc_skb instead dev_alloc_skb
This patch uses the netdev_alloc_skb instead dev_alloc_skb function and
drops the seperate assignment to skb->dev.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:51 -04:00
Alexander Aring
53cb5717b4 6lowpan: remove unnecessary check on err >= 0
The err variable can only be zero in this case.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:51 -04:00
Alexander Aring
545f3613a8 6lowpan: remove unnecessary ret variable
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:51 -04:00
Trond Myklebust
9d3a2260f0 SUNRPC: Fix buffer overflow checking in gss_encode_v0_msg/gss_encode_v1_msg
In gss_encode_v1_msg, it is pointless to BUG() after the overflow has
happened. Replace the existing sprintf()-based code with scnprintf(),
and warn if an overflow is ever triggered.

In gss_encode_v0_msg, replace the runtime BUG_ON() with an appropriate
compile-time BUILD_BUG_ON.

Reported-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 18:53:21 -04:00
Trond Myklebust
5fccc5b52e SUNRPC: gss_alloc_msg - choose _either_ a v0 message or a v1 message
Add the missing 'break' to ensure that we don't corrupt a legacy 'v0' type
message by appending the 'v1'.

Cc: Bruce Fields <bfields@fieldses.org>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 18:44:20 -04:00
wangweidong
8313164c36 SUNRPC: remove an unnecessary if statement
If req allocated failed just goto out_free, no need to check the
'i < num_prealloc'. There is just code simplification, no
functional changes.

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 18:16:56 -04:00
J. Bruce Fields
e3bfab1848 sunrpc: comment typo fix
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 18:16:54 -04:00
Trond Myklebust
34751b9d04 SUNRPC: Add correct rcu_dereference annotation in rpc_clnt_set_transport
rpc_clnt_set_transport should use rcu_derefence_protected(), as it is
only safe to be called with the rpc_clnt::cl_lock held.

Cc: Chuck Lever <Chuck.Lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 16:46:37 -04:00
Trond Myklebust
40b00b6b17 SUNRPC: Add a helper to switch the transport of an rpc_clnt
Add an RPC client API to redirect an rpc_clnt's transport from a
source server to a destination server during a migration event.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: forward ported to 3.12 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 15:21:32 -04:00
Chuck Lever
d746e54522 SUNRPC: Modify synopsis of rpc_client_register()
The rpc_client_register() helper was added in commit e73f4cc0,
"SUNRPC: split client creation routine into setup and registration,"
Mon Jun 24 11:52:52 2013.  In a subsequent patch, I'd like to invoke
rpc_client_register() from a context where a struct rpc_create_args
is not available.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28 15:20:29 -04:00
Pablo Neira Ayuso
46413825a7 netfilter: bridge: nf_tables: add filter chain type
This patch adds the filter chain type which is required to
create filter chains in the bridge family from userspace.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-28 18:07:35 +01:00
Tomasz Bursztyka
98c37b6b01 netfilter: nft_nat: Fix endianness issue reported by sparse
This patch fixes this:

CHECK   net/netfilter/nft_nat.c
net/netfilter/nft_nat.c:50:43: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:50:43:    expected restricted __be32 [addressable] [usertype] ip
net/netfilter/nft_nat.c:50:43:    got unsigned int [unsigned] [usertype] <noident>
net/netfilter/nft_nat.c:51:43: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:51:43:    expected restricted __be32 [addressable] [usertype] ip
net/netfilter/nft_nat.c:51:43:    got unsigned int [unsigned] [usertype] <noident>
net/netfilter/nft_nat.c:65:37: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:65:37:    expected restricted __be16 [addressable] [assigned] [usertype] all
net/netfilter/nft_nat.c:65:37:    got unsigned int [unsigned] <noident>
net/netfilter/nft_nat.c:66:37: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:66:37:    expected restricted __be16 [addressable] [assigned] [usertype] all
net/netfilter/nft_nat.c:66:37:    got unsigned int [unsigned] <noident>

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-28 17:41:49 +01:00
Pablo Neira Ayuso
6e078bc2f2 netfilter: bridge: fix nf_tables bridge dependencies with main core
when CONFIG_NF_TABLES[_MODULE] is not enabled,
but CONFIG_NF_TABLES_BRIDGE is enabled:

net/bridge/netfilter/nf_tables_bridge.c: In function 'nf_tables_bridge_init_net':
net/bridge/netfilter/nf_tables_bridge.c:24:5: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:25:9: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:28:2: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:30:34: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:35:11: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c: In function 'nf_tables_bridge_exit_net':
net/bridge/netfilter/nf_tables_bridge.c:41:27: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:42:11: error: 'struct net' has no member named 'nft'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-28 17:41:21 +01:00
Andrei Otcheretianski
d0a361a5b3 nl80211: fix channel switch parsing
The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested
inside NL80211_ATTR_CSA_IES, but commit ee4bc9e758
("nl80211: enable IBSS support for channel switch announcements")
added a check in the outer message attributes.

Fix channel switch calls by removing the erroneus condition.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:13:04 +01:00
Michal Kazior
0951ebb8aa mac80211: fix uninitialized variable
CSA completion could call in a driver
bss_info_changed() with a garbled `changed` flag
leading to all sorts of problems.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:31 +01:00
Chun-Yeow Yeoh
33a45867c5 mac80211: process mesh channel switching using beacon
Trigger the mesh channel switching procedure if the mesh STA
happens to miss the CSA action frame but able to receive the
beacon containing the CSA and MCSP elements from its peer
mesh STAs.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
[fix locking in ieee80211_mesh_process_chnswitch()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:30 +01:00
Chun-Yeow Yeoh
b8456a14e9 {nl,cfg,mac}80211: implement mesh channel switch userspace API
Implement the required procedures for mesh channel switching as defined
in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA
and MCSP elements as followed:
 * Add the function for updating the beacon and probe response frames
   with CSA and MCSP elements during the period of switching to the new
   channel. Both CSA and MCSP elements must be included in beacon and
   probe response frames until the intended channel switch time.
 * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements
   will then be removed from the beacon or probe response frames once the
   new channel is switched to.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:30 +01:00
Chun-Yeow Yeoh
c6da674aff {nl,cfg,mac}80211: enable the triggering of CSA frame in mesh
Allow the triggering of CSA frame using mesh interface. The
rules are more or less same with IBSS, such as not allowed to
change between the band and channel width has to be same from
the previous mode. Also, move the ieee80211_send_action_csa
to a common space so that it can be re-used by mesh interface.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:29 +01:00
Chun-Yeow Yeoh
8f2535b92d mac80211: process the CSA frame for mesh accordingly
Process the CSA frame according to the procedures define in IEEE Std
802.11-2012 section 10.9.8.4.3 as follow:
* The mesh channel switch parameters element (MCSP) must be availabe.
* If the MCSP's TTL is 1, drop the frame but still process the CSA.
* If the MCSP's precedence value is less than or equal to the current
  precedence value, drop the frame and do not process the CSA.
* The CSA frame is forwarded after TTL is decremented by 1 and the
  initiator field is set to 0. Transmit restrict field and others
  are maintained as is.
* No beacon or probe response frame are handled here.

Also, introduce the debug message used for mesh CSA purpose.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:28 +01:00
Chun-Yeow Yeoh
c0f17eb9b2 mac80211: refactor the parsing of chan switch ie
Refactor the channel switch IE parsing to reduce the number
of function parameters.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:28 +01:00
Felix Fietkau
06be6b149f mac80211: add ieee80211_tx_prepare_skb() helper function
This can be used by a driver to prepare skbs for transmission, which were
obtained via functions such as ieee80211_probereq_get or
ieee80211_nullfunc_get.

This is useful for drivers that want to send those frames directly, but
need rate control information to be prepared first.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:27 +01:00
Luis R. Rodriguez
034c6d6e67 cfg80211: export reg_initiator_name()
Drivers can now use this to parse the regulatory request and
be more verbose when needed.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:27 +01:00
Marco Porsch
446075d76b mac80211: fixes for mesh powersave logic
This patch fixes errors in the mesh powersave logic which
cause that remote peers do not get peer power mode change
notifications and mesh peer service periods (MPSPs) got
stuck.

When closing a peer link, set the (now invalid) peer-specific
power mode to 'unknown'.

Avoid overhead when local power mode is unchanged.

Reliably clear MPSP flags on peering status update.

Avoid MPSP flags getting stuck by not requesting a further
MPSP ownership if we already are an MPSP owner.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:26 +01:00
Seth Forshee
17ac49594f mac80211: Remove check for offchannel state when waking netdev queues
6c17b77b67 ensures that a device's
mac80211 queues will remain stopped while offchannel. Since the
vif can no longer be offchannel when the queues wake it's not
necessary to check for this before waking its netdev queues.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:26 +01:00
Heikki Krogerus
ef91ffaa03 net: rfkill: gpio: add ACPI support
Including ACPI ID for Broadcom GPS receiver BCM4752.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:25 +01:00
Heikki Krogerus
262c91ee5e net: rfkill: gpio: prepare for DT and ACPI support
This will add the relevant values like the gpios and the
type in rfkill_gpio_platform_data to the rfkill_gpio_data
structure. It will allow those values to be easily picked
from DT and ACPI tables later.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:25 +01:00
Heikki Krogerus
0be81727a4 net: rfkill: gpio: spinlock-safe GPIO access
This sets the direction of the gpio once when it's requested,
and uses the spinlock-safe gpio_set_state() to change the
state.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:24 +01:00
Heikki Krogerus
f02ae59b12 net: rfkill: gpio: clean up clock handling
Use a simple flag to see the state of the clock, and make
the clock available even without a name. Also, get rid of
HAVE_CLK dependency.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:24 +01:00
Heikki Krogerus
5e7ca3937f net: rfkill: gpio: convert to resource managed allocation
And remove now unneeded resource freeing.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:23 +01:00
Simon Wunderlich
8e8d347da7 mac80211: enable DFS for IBSS mode
Allow changing to DFS channels if the channel is available for
beaconing and userspace controls DFS operation.

Channel switch announcement from other stations on DFS channels will
be interpreted as radar event. These channels will then be marked as
unvailable.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:21 +01:00
Simon Wunderlich
5336fa88e8 nl80211/cfg80211: enable DFS for IBSS mode
To use DFS in IBSS mode, userspace is required to react to radar events.
It can inform nl80211 that it is capable of doing so by adding a
NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS.

This attribute is supplied to let the kernelspace know that the
userspace application can and will handle radar events, e.g. by
intiating channel switches to a valid channel. DFS channels may
only be used if this attribute is supplied and the driver supports
it. Driver support will be checked even if a channel without DFS
will be initially joined, as a DFS channel may be chosen later.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[fix attribute name in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:21 +01:00
Emmanuel Grumbach
687da13223 mac80211: implement SMPS for AP
When the driver requests to move to STATIC or DYNAMIC SMPS,
we send an action frame to each associated station and
reconfigure the channel context / driver.
Of course, non-MIMO stations are ignored.

The beacon isn't updated. The association response will
include the original capabilities. Stations that associate
while in non-OFF SMPS mode will get an action frame right
after association to inform them about our current state.
Note that we wait until the end of the EAPOL. Sending an
action frame before the EAPOL is finished can be an issue
for a few clients. Clients aren't likely to send EAPOL
frames in MIMO anyway.

When the SMPS configuration gets more permissive (e.g.
STATIC -> OFF), we don't wake up stations that are asleep
We remember that they don't know about the change and send
the action frame when they wake up.

When the SMPS configuration gets more restrictive (e.g.
OFF -> STATIC), we set the TIM bit for every sleeping STA.
uAPSD stations might send MIMO until they poll the action
frame, but this is for a short period of time.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[fix vht streams loop, initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:11 +01:00
Daniel Borkmann
6e7cd27c0f net: ipvs: sctp: add missing verdict assignments in sctp_conn_schedule
If skb_header_pointer() fails, we need to assign a verdict, that is
NF_DROP in this case, otherwise, we would leave the verdict from
conn_schedule() uninitialized when returning.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2013-10-28 19:00:49 +09:00
Steffen Klassert
eeb1b73378 xfrm: Increase the garbage collector threshold
With the removal of the routing cache, we lost the
option to tweak the garbage collector threshold
along with the maximum routing cache size. So git
commit 703fb94ec ("xfrm: Fix the gc threshold value
for ipv4") moved back to a static threshold.

It turned out that the current threshold before we
start garbage collecting is much to small for some
workloads, so increase it from 1024 to 32768. This
means that we start the garbage collector if we have
more than 32768 dst entries in the system and refuse
new allocations if we are above 65536.

Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-28 07:37:52 +01:00
wangweidong
747edc0f9e sctp: merge two if statements to one
Two if statements do the same work, we can merge them to
one. And fix some typos. There is just code simplification,
no functional changes.

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 01:02:34 -04:00
wangweidong
3dc0a548a0 sctp: remove the repeat initialize with 0
kmem_cache_zalloc had set the allocated memory to zero. I think no need
to initialize with 0. And move the comments to the function begin.

Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 01:02:34 -04:00
wangweidong
2bccbadf20 sctp: fix some comments in chunk.c and associola.c
fix some typos

Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 01:02:34 -04:00
Eric Dumazet
8c3a897bfa inet: restore gso for vxlan
Alexei reported a performance regression on vxlan, caused
by commit 3347c96029 "ipv4: gso: make inet_gso_segment() stackable"

GSO vxlan packets were not properly segmented, adding IP fragments
while they were not expected.

Rename 'bool tunnel' to 'bool encap', and add a new boolean
to express the fact that UDP should be fragmented.
This fragmentation is triggered by skb->encapsulation being set.

Remove a "skb->encapsulation = 1" added in above commit,
as its not needed, as frags inherit skb->frag from original
GSO skb.

Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 00:23:06 -04:00
Eric Dumazet
fc59d5bdf1 pkt_sched: fq: clear time_next_packet for reused flows
When a socket is freed/reallocated, we need to clear time_next_packet
or else we can inherit a prior value and delay first packets of the
new flow.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 00:18:31 -04:00
Yuchung Cheng
2f715c1dde tcp: do not rearm RTO when future data are sacked
Patch ed08495c3 "tcp: use RTT from SACK for RTO" always re-arms RTO upon
obtaining a RTT sample from newly sacked data.

But technically RTO should only be re-armed when the data sent before
the last (re)transmission of write queue head are (s)acked. Otherwise
the RTO may continue to extend during loss recovery on data sent
in the future.

Note that RTTs from ACK or timestamps do not have this problem, as the RTT
source must be from data sent before.

The new RTO re-arm policy is
1) Always re-arm RTO if SND.UNA is advanced
2) Re-arm RTO if sack RTT is available, provided the sacked data was
   sent before the last time write_queue_head was sent.

Signed-off-by: Larry Brakmo <brakmo@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27 16:50:06 -04:00
Yuchung Cheng
2909d874f3 tcp: only take RTT from timestamps if new data is acked
Patch ed08495c3 "tcp: use RTT from SACK for RTO" has a bug that
it does not check if the ACK acknowledge new data before taking
the RTT sample from TCP timestamps. This patch adds the check
back as required by the RFC.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27 16:50:06 -04:00
Yuchung Cheng
bc15afa39e tcp: fix SYNACK RTT estimation in Fast Open
tp->lsndtime may not always be the SYNACK timestamp if a passive
Fast Open socket sends data before handshake completes. And if the
remote acknowledges both the data and the SYNACK, the RTT sample
is already taken in tcp_ack(), so no need to call
tcp_update_ack_rtt() in tcp_synack_rtt_meas() aagain.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27 16:50:06 -04:00
Florian Westphal
6b8dbcf2c4 bridge: netfilter: orphan skb before invoking ip netfilter hooks
Pekka Pietikäinen reports xt_socket behavioural change after commit
00028aa37098o (netfilter: xt_socket: use IP early demux).

Reason is xt_socket now no longer does an unconditional sk lookup -
it re-uses existing skb->sk if possible, assuming ->sk was set by
ip early demux.

However, when netfilter is invoked via bridge, this can cause 'bogus'
sockets to be examined by the match, e.g. a 'tun' device socket.

bridge netfilter should orphan the skb just like the routing path
before invoking ipv4/ipv6 netfilter hooks to avoid this.

Reported-and-tested-by: Pekka Pietikäinen <pp@ee.oulu.fi>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-27 21:44:33 +01:00
Michael Opdenacker
1e56555ee1 netfilter: ipset: remove duplicate define
This patch removes a duplicate define from
net/netfilter/ipset/ip_set_hash_gen.h

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-10-27 19:24:45 +01:00
Jozsef Kadlecsik
dc476e7c8e netfilter:ipset: Fix memory allocation for bitmap:port
At the restructuring of the bitmap types creation in ipset, for the
bitmap:port type wrong (too large) memory allocation was copied
(netfilter bugzilla id #859).

Reported-by: Quentin Armitage <quentin@armitage.org.uk>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-10-27 19:24:39 +01:00
Jeff Layton
cf4c024b90 sunrpc: trim off EC bytes in GSSAPI v2 unwrap
As Bruce points out in RFC 4121, section 4.2.3:

   "In Wrap tokens that provide for confidentiality, the first 16 octets
    of the Wrap token (the "header", as defined in section 4.2.6), SHALL
    be appended to the plaintext data before encryption.  Filler octets
    MAY be inserted between the plaintext data and the "header.""

...and...

   "In Wrap tokens with confidentiality, the EC field SHALL be used to
    encode the number of octets in the filler..."

It's possible for the client to stuff different data in that area on a
retransmission, which could make the checksum come out wrong in the DRC
code.

After decrypting the blob, we should trim off any extra count bytes in
addition to the checksum blob.

Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-10-26 15:36:55 -04:00
Hannes Frederic Sowa
e3bc10bd95 ipv6: ip6_dst_check needs to check for expired dst_entries
On receiving a packet too big icmp error we check if our current cached
dst_entry in the socket is still valid. This validation check did not
care about the expiration of the (cached) route.

The error path I traced down:
The socket receives a packet too big mtu notification. It still has a
valid dst_entry and thus issues the ip6_rt_pmtu_update on this dst_entry,
setting RTF_EXPIRE and updates the dst.expiration value (which could
fail because of not up-to-date expiration values, see previous patch).

In some seldom cases we race with a) the ip6_fib gc or b) another routing
lookup which would result in a recreation of the cached rt6_info from its
parent non-cached rt6_info. While copying the rt6_info we reinitialize the
metrics store by copying it over from the parent thus invalidating the
just installed pmtu update (both dsts use the same key to the inetpeer
storage). The dst_entry with the just invalidated metrics data would
just get its RTF_EXPIRES flag cleared and would continue to stay valid
for the socket.

We should have not issued the pmtu update on the already expired dst_entry
in the first placed. By checking the expiration on the dst entry and
doing a relookup in case it is out of date we close the race because
we would install a new rt6_info into the fib before we issue the pmtu
update, thus closing this race.

Not reliably updating the dst.expire value was fixed by the patch "ipv6:
reset dst.expires value when clearing expire flag".

Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Reported-by: Valentijn Sessink <valentyn@blub.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Valentijn Sessink <valentyn@blub.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:26:59 -04:00
Antonio Quartulli
8fb479a47c netpoll: fix rx_hook() interface by passing the skb
Right now skb->data is passed to rx_hook() even if the skb
has not been linearised and without giving rx_hook() a way
to linearise it.

Change the rx_hook() interface and make it accept the skb
and the offset to the UDP payload as arguments. rx_hook() is
also renamed to rx_skb_hook() to ensure that out of the tree
users notice the API change.

In this way any rx_skb_hook() implementation can perform all
the needed operations to properly (and safely) access the
skb data.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:26:58 -04:00
Alexei Starovoitov
7f29405403 net: fix rtnl notification in atomic context
commit 991fb3f74c "dev: always advertise rx_flags changes via netlink"
introduced rtnl notification from __dev_set_promiscuity(),
which can be called in atomic context.

Steps to reproduce:
ip tuntap add dev tap1 mode tap
ifconfig tap1 up
tcpdump -nei tap1 &
ip tuntap del dev tap1 mode tap

[  271.627994] device tap1 left promiscuous mode
[  271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940
[  271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip
[  271.677525] INFO: lockdep is turned off.
[  271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G        W    3.12.0-rc3+ #73
[  271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[  271.731254]  ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428
[  271.760261]  ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8
[  271.790683]  0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8
[  271.822332] Call Trace:
[  271.838234]  [<ffffffff817544e5>] dump_stack+0x55/0x76
[  271.854446]  [<ffffffff8108bad1>] __might_sleep+0x181/0x240
[  271.870836]  [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0
[  271.887076]  [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0
[  271.903368]  [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0
[  271.919716]  [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0
[  271.936088]  [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0
[  271.952504]  [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0
[  271.968902]  [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100
[  271.985302]  [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0
[  272.001642]  [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0
[  272.017917]  [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380
[  272.033961]  [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50
[  272.049855]  [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0
[  272.065494]  [<ffffffff81732052>] packet_notifier+0x1b2/0x380
[  272.080915]  [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380
[  272.096009]  [<ffffffff81761c66>] notifier_call_chain+0x66/0x150
[  272.110803]  [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10
[  272.125468]  [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20
[  272.139984]  [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70
[  272.154523]  [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20
[  272.168552]  [<ffffffff816224c5>] rollback_registered_many+0x145/0x240
[  272.182263]  [<ffffffff81622641>] rollback_registered+0x31/0x40
[  272.195369]  [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90
[  272.208230]  [<ffffffff81547ca0>] __tun_detach+0x140/0x340
[  272.220686]  [<ffffffff81547ed6>] tun_chr_close+0x36/0x60

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:45 -04:00
Hannes Frederic Sowa
66415cf8a1 net: initialize hashrnd in flow_dissector with net_get_random_once
We also can defer the initialization of hashrnd in flow_dissector
to its first use. Since net_get_random_once is irq safe now we don't
have to audit the call paths if one of this functions get called by an
interrupt handler.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Hannes Frederic Sowa
f84be2bd96 net: make net_get_random_once irq safe
I initial build non irq safe version of net_get_random_once because I
would liked to have the freedom to defer even the extraction process of
get_random_bytes until the nonblocking pool is fully seeded.

I don't think this is a good idea anymore and thus this patch makes
net_get_random_once irq safe. Now someone using net_get_random_once does
not need to care from where it is called.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Nikolay Aleksandrov
974daef7f8 net: add missing dev_put() in __netdev_adjacent_dev_insert
I think that a dev_put() is needed in the error path to preserve the
proper dev refcount.

CC: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Hagen Paul Pfeifer
4a3ad7b3ea netem: markov loss model transition fix
The transition from markov state "3 => lost packets within a burst
period" to "1 => successfully transmitted packets within a gap period"
has no *additional* loss event. The loss already happen for transition
from 1 -> 3, this additional loss will make things go wild.

E.g. transition probabilities:

p13:   10%
p31:  100%

Expected:

Ploss = p13 / (p13 + p31)
Ploss = ~9.09%

... but it isn't. Even worse: we get a double loss - each time.
So simple don't return true to indicate loss, rather break and return
false.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Stefano Salsano <stefano.salsano@uniroma2.it>
Cc: Fabio Ludovici <fabio.ludovici@yahoo.it>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Vinod Koul
27bf697083 net: use DMA_COMPLETE for dma completion status
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25 11:16:21 +05:30
Al Viro
72c2d53192 file->f_op is never NULL...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:54 -04:00
Al Viro
1e903edadf sunrpc: switch to %pd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:51 -04:00
David S. Miller
b45bd46dec Included changes:
- data structure reshaping to accommodate multiple routing protocol
   implementations
 - routing protocol API enhancement
 - send to userspace the event "batman-adv Gateway loss" in case of soft-iface
   destruction and a "batman-adv Gateway" was configured
 - improve the TT component to support and advertise runtime flag changes
 - minor code refactoring
 - make the ICMP kernel-to-userspace communication more generic
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJSZ+VyAAoJEADl0hg6qKeOccIP/1RE68wFqd20BTh6WtnKo4s6
 H/F5WMUrk/HCNe3p4JnIOYv5WESR3tqTylCqBIl3yzcsks2KsLm4zEG5FIx/0J3Y
 1Mgy8V/xlGVN7M+wFSLCgzpTnJ3aCvy7+ied2qoz9KsC4vgiKUimDkPTsbUL7NUp
 OBmJGYfe/nLDoPI/CXu3nJCtNXcDgv5a5Z8ZMBuipeK++JsBMZRLfJEIM+7Q4Ouc
 KNLZFXavwtXAxsHLpWDS48MkVAz0tbyy4P6e2k7iQQq+W1WZjCoFMz0xLIKRFf+Y
 yOOZXItpTTX7rzLxFHkLAopZo9UMPsFjm/OceFBlnAbp24ftfR0b4gjFAUQiKFsq
 lGlGIXVkhsR6arfQ4SIlrrGOW7h+Kea2I1aPWC7yoi/97+22Nrr/a903p+kkhP4t
 sAoMk7DbbdajcV01RULF+xjaBFvEdaSfSBVB5j76Gf9AxNZfSGd7wH1qPG7O7HFT
 jO6Z4fbG6bbHBHMt9j4o9oGg4h5X8epbhZB7e8rwoBe/dSzw+B4CK2Y+j1/QW3C4
 PDqL3t5yi0O0+dhkI2G8DmhTOm+ZKVZt60WIMM+G5T6DiLyECveexGWIbjjZR67w
 qgVXsvE0PwHabY8Ne/z+IlnHY8zegUFYVusQ0lQfLpkKhdjoYXLF709RT42r2QIN
 8/6WlNGD2YG/0sWEDF7H
 =sYKR
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
this is another set of changes intended for net-next/linux-3.13.
(probably our last pull request for this cycle)

Patches 1 and 2 reshape two of our main data structures in a way that they can
easily be extended in the future to accommodate new routing protocols.

Patches from 3 to 9 improve our routing protocol API and its users so that all
the protocol-related code is not mixed up with the other components anymore.

Patch 10 limits the local Translation Table maximum size to a value such that it
can be fully transfered over the air if needed. This value depends on
fragmentation being enabled or not and on the mtu values.

Patch 11 makes batman-adv send a uevent in case of soft-interface destruction
while a "bat-Gateway" was configured (this informs userspace about the GW not
being available anymore).

Patches 13 and 14 enable the TT component to detect non-mesh client flag
changes at runtime (till now those flags where set upon client detection and
were not changed anymore).

Patch 16 is a generalisation of our user-to-kernel space communication (and
viceversa) used to exchange ICMP packets to send/received to/from the mesh
network. Now it can easily accommodate new ICMP packet types without breaking
the existing userspace API anymore.

Remaining patches are minor changes and cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:12:33 -04:00
Hannes Frederic Sowa
7088ad74e6 inet: remove old fragmentation hash initializing
All fragmentation hash secrets now get initialized by their
corresponding hash function with net_get_random_once. Thus we can
eliminate the initial seeding.

Also provide a comment that hash secret seeding happens at the first
call to the corresponding hashing function.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:01:41 -04:00
Hannes Frederic Sowa
b1190570b4 ipv6: split inet6_hash_frag for netfilter and initialize secrets with net_get_random_once
Defer the fragmentation hash secret initialization for IPv6 like the
previous patch did for IPv4.

Because the netfilter logic reuses the hash secret we have to split it
first. Thus introduce a new nf_hash_frag function which takes care to
seed the hash secret.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:01:40 -04:00
Hannes Frederic Sowa
e7b519ba55 ipv4: initialize ip4_frags hash secret as late as possible
Defer the generation of the first hash secret for the ipv4 fragmentation
cache as late as possible.

ip4_frags.rnd gets initial seeded by inet_frags_init and regulary
reseeded by inet_frag_secret_rebuild. Either we call ipqhashfn directly
from ip_fragment.c in which case we initialize the secret directly.

If we first get called by inet_frag_secret_rebuild we install a new secret
by a manual call to get_random_bytes. This secret will be overwritten
as soon as the first call to ipqhashfn happens. This is safe because we
won't race while publishing the new secrets with anyone else.

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:01:40 -04:00
Daniel Borkmann
fecda03493 net: sctp: fix ASCONF to allow non SCTP_ADDR_SRC addresses in ipv6
Commit 8a07eb0a50 ("sctp: Add ASCONF operation on the single-homed host")
implemented possible use of IPv4 addresses with non SCTP_ADDR_SRC state
as source address when sending ASCONF (ADD) packets, but IPv6 part for
that was not implemented in 8a07eb0a50. Therefore, as this is not restricted
to IPv4-only, fix this up to allow the same for IPv6 addresses in SCTP.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-by: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 16:57:14 -04:00
David S. Miller
afb14c7cb6 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains three netfilter fixes for your net
tree, they are:

* A couple of fixes to resolve info leak to userspace due to uninitialized
  memory area in ulogd, from Mathias Krause.

* Fix instruction ordering issues that may lead to the access of
  uninitialized data in x_tables. The problem involves the table update
 (producer) and the main packet matching (consumer) routines. Detected in
  SMP ARMv7, from Will Deacon.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 16:55:04 -04:00