Fix the handling of signals in client rxrpc calls made by the afs
filesystem. Ignore signals completely, leaving call abandonment or
connection loss to be detected by timeouts inside AF_RXRPC.
Allowing a filesystem call to be interrupted after the entire request has
been transmitted and an abort sent means that the server may or may not
have done the action - and we don't know. It may even be worse than that
for older servers.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the
timeout for when a signal occurs up to at least two jiffies as a 1 jiffy
timeout may end up being effectively 0 if jiffies wraps at the wrong time.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the interruptibility of kernel-initiated client calls so that they're
either only interruptible when they're waiting for a call slot to come
available or they're not interruptible at all. Either way, they're not
interruptible during transmission.
This should help prevent StoreData calls from being interrupted when
writeback is in progress. It doesn't, however, handle interruption during
the receive phase.
Userspace-initiated calls are still interruptable. After the signal has
been handled, sendmsg() will return the amount of data copied out of the
buffer and userspace can perform another sendmsg() call to continue
transmission.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Abstract out the calculation of there being sufficient Tx buffer space.
This is reproduced several times in the rxrpc sendmsg code.
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock. RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.
To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred. This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.
Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.
Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.
Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.
Fixes: 999b69f892 ("rxrpc: Kill the client connection bundle concept")
Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com
Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls. This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.
In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.
KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).
Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.
Fixes: 5273a191dc ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a call is disconnected, the connection pointer from the call is
cleared to make sure it isn't used again and to prevent further attempted
transmission for the call. Unfortunately, there might be a daemon trying
to use it at the same time to transmit a packet.
Fix this by keeping call->conn set, but setting a flag on the call to
indicate disconnection instead.
Remove also the bits in the transmission functions where the conn pointer is
checked and a ref taken under spinlock as this is now redundant.
Fixes: 8d94aa381d ("rxrpc: Calls shouldn't hold socket refs")
Signed-off-by: David Howells <dhowells@redhat.com>
The introduction of a split between the reference count on rxrpc_local
objects and the usage count didn't quite go far enough. A number of kernel
work items need to make use of the socket to perform transmission. These
also need to get an active count on the local object to prevent the socket
from being closed.
Fix this by getting the active count in those places.
Also split out the raw active count get/put functions as these places tend
to hold refs on the rxrpc_local object already, so getting and putting an
extra object ref is just a waste of time.
The problem can lead to symptoms like:
BUG: kernel NULL pointer dereference, address: 0000000000000018
..
CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51
...
RIP: 0010:selinux_socket_sendmsg+0x5/0x13
...
Call Trace:
security_socket_sendmsg+0x2c/0x3e
sock_sendmsg+0x1a/0x46
rxrpc_send_keepalive+0x131/0x1ae
rxrpc_peer_keepalive_worker+0x219/0x34b
process_one_work+0x18e/0x271
worker_thread+0x1a3/0x247
kthread+0xe6/0xeb
ret_from_fork+0x1f/0x30
Fixes: 730c5fd42c ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence
number of the packet is immediately following the hard-ack point at the end
of the function. However, this isn't sufficient, since the recvmsg side
may have been advancing the window and then overrun the position in which
we're adding - at which point rx_hard_ack >= seq0 and no notification is
generated.
Fix this by always generating a notification at the end of the input
function.
Without this, a long call may stall, possibly indefinitely.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix rxrpc_put_local() to not access local->debug_id after calling
atomic_dec_return() as, unless that returned n==0, we no longer have the
right to access the object.
Fixes: 06d9532fa6 ("rxrpc: Fix read-after-free in rxrpc_queue_local()")
Signed-off-by: David Howells <dhowells@redhat.com>
The subpacket scanning loop in rxrpc_receive_data() references the
subpacket count in the private data part of the sk_buff in the loop
termination condition. However, when the final subpacket is pasted into
the ring buffer, the function is no longer has a ref on the sk_buff and
should not be looking at sp->* any more. This point is actually marked in
the code when skb is cleared (but sp is not - which is an error).
Fix this by caching sp->nr_subpackets in a local variable and using that
instead.
Also clear 'sp' to catch accesses after that point.
This can show up as an oops in rxrpc_get_skb() if sp->nr_subpackets gets
trashed by the sk_buff getting freed and reused in the meantime.
Fixes: e2de6c4048 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=vwQ0
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
Here are a couple of bugfixes plus a patch that makes one of the bugfixes
easier:
(1) Move the ping and mutex unlock on a new call from rxrpc_input_packet()
into rxrpc_new_incoming_call(), which it calls. This means the
lock-unlock section is entirely within the latter function. This
simplifies patch (2).
(2) Don't take the call->user_mutex at all in the softirq path. Mutexes
aren't allowed to be taken or released there and a patch was merged
that caused a warning to be emitted every time this happened. Looking
at the code again, it looks like that taking the mutex isn't actually
necessary, as the value of call->state will block access to the call.
(3) Fix the incoming call path to check incoming calls earlier to reject
calls to RPC services for which we don't have a security key of the
appropriate class. This avoids an assertion failure if YFS tries
making a secure call to the kafs cache manager RPC service.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix rxrpc_new_incoming_call() to check that we have a suitable service key
available for the combination of service ID and security class of a new
incoming call - and to reject calls for which we don't.
This causes an assertion like the following to appear:
rxrpc: Assertion failed - 6(0x6) == 12(0xc) is false
kernel BUG at net/rxrpc/call_object.c:456!
Where call->state is RXRPC_CALL_SERVER_SECURING (6) rather than
RXRPC_CALL_COMPLETE (12).
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Standard kernel mutexes cannot be used in any way from interrupt or softirq
context, so the user_mutex which manages access to a call cannot be a mutex
since on a new call the mutex must start off locked and be unlocked within
the softirq handler to prevent userspace interfering with a call we're
setting up.
Commit a0855d24fc ("locking/mutex: Complain
upon mutex API misuse in IRQ contexts") causes big warnings to be splashed
in dmesg for each a new call that comes in from the server. Whilst it
*seems* like it should be okay, since the accept path uses trylock, there
are issues with PI boosting and marking the wrong task as the owner.
Fix this by not taking the mutex in the softirq path at all. It's not
obvious that there should be any need for it as the state is set before the
first notification is generated for the new call.
There's also no particular reason why the link-assessing ping should be
triggered inside the mutex. It's not actually transmitted there anyway,
but rather it has to be deferred to a workqueue.
Further, I don't think that there's any particular reason that the socket
notification needs to be done from within rx->incoming_lock, so the amount
of time that lock is held can be shortened too and the ping prepared before
the new call notification is sent.
Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Peter Zijlstra (Intel) <peterz@infradead.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Will Deacon <will@kernel.org>
cc: Davidlohr Bueso <dave@stgolabs.net>
Move the unlock and the ping transmission for a new incoming call into
rxrpc_new_incoming_call() rather than doing it in the caller. This makes
it clearer to see what's going on.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Will Deacon <will@kernel.org>
cc: Davidlohr Bueso <dave@stgolabs.net>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained
all the data for the last packet, it checks the last-packet flag on the
whole packet - but this is wrong, since the last-packet flag is only set on
the final subpacket of the last jumbo packet. This means that a call that
receives its last packet in a jumbo packet won't complete properly.
Fix this by having rxrpc_locate_data() determine the last-packet state of
the subpacket it's looking at and passing that back to the caller rather
than having the caller look in the packet header. The caller then needs to
cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then
called again for this packet.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Fixes: e2de6c4048 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to extend the rcu_read_lock() section in rxrpc_error_report()
and use rcu_dereference_sk_user_data() instead of plain access
to sk->sk_user_data to make sure all rules are respected.
The compiler wont reload sk->sk_user_data at will, and RCU rules
prevent memory beeing freed too soon.
Fixes: f0308fb070 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as
the UDP socket is being shut down, rxrpc_error_report() may get called to
deal with it after sk_user_data on the UDP socket has been cleared, leading
to a NULL pointer access when this local endpoint record gets accessed.
Fix this by just returning immediately if sk_user_data was NULL.
The oops looks like the following:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_error_report+0x1bd/0x6a9
...
Call Trace:
? sock_queue_err_skb+0xbd/0xde
? __udp4_lib_err+0x313/0x34d
__udp4_lib_err+0x313/0x34d
icmp_unreach+0x1ee/0x207
icmp_rcv+0x25b/0x28f
ip_protocol_deliver_rcu+0x95/0x10e
ip_local_deliver+0xe9/0x148
__netif_receive_skb_one_core+0x52/0x6e
process_backlog+0xdc/0x177
net_rx_action+0xf9/0x270
__do_softirq+0x1b6/0x39a
? smpboot_register_percpu_thread+0xce/0xce
run_ksoftirqd+0x1d/0x42
smpboot_thread_fn+0x19e/0x1b3
kthread+0xf1/0xf6
? kthread_delayed_work_timer_fn+0x83/0x83
ret_from_fork+0x24/0x30
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: syzbot+611164843bd48cc2190c@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the cleanup of the crypto state on a call after the call has been
disconnected. As the call has been disconnected, its connection ref has
been discarded and so we can't go through that to get to the security ops
table.
Fix this by caching the security ops pointer in the rxrpc_call struct and
using that when freeing the call security state. Also use this in other
places we're dealing with call-specific security.
The symptoms look like:
BUG: KASAN: use-after-free in rxrpc_release_call+0xb2d/0xb60
net/rxrpc/call_object.c:481
Read of size 8 at addr ffff888062ffeb50 by task syz-executor.5/4764
Fixes: 1db88c5343 ("rxrpc: Fix -Wframe-larger-than= warnings from on-stack crypto")
Reported-by: syzbot+eed305768ece6682bb7f@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
The rxrpc_peer record needs to hold a reference on the rxrpc_local record
it points as the peer is used as a base to access information in the
rxrpc_local record.
This can cause problems in __rxrpc_put_peer(), where we need the network
namespace pointer, and in rxrpc_send_keepalive(), where we need to access
the UDP socket, leading to symptoms like:
BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411
[inline]
BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0
net/rxrpc/peer_object.c:435
Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216
Fix this by taking a ref on the local record for the peer record.
Fixes: ace45bec6d ("rxrpc: Fix firewall route keepalive")
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_put_call() calls trace_rxrpc_call() after it has done the decrement
of the refcount - which looks at the debug_id in the call record. But
unless the refcount was reduced to zero, we no longer have the right to
look in the record and, indeed, it may be deleted by some other thread.
Fix this by getting the debug_id out before decrementing the refcount and
then passing that into the tracepoint.
Fixes: e34d4234b0 ("rxrpc: Trace rxrpc_call usage")
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_put_*conn() calls trace_rxrpc_conn() after they have done the
decrement of the refcount - which looks at the debug_id in the connection
record. But unless the refcount was reduced to zero, we no longer have the
right to look in the record and, indeed, it may be deleted by some other
thread.
Fix this by getting the debug_id out before decrementing the refcount and
then passing that into the tracepoint.
Fixes: 363deeab6d ("rxrpc: Add connection tracepoint and client conn state tracepoint")
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_put_peer() calls trace_rxrpc_peer() after it has done the decrement
of the refcount - which looks at the debug_id in the peer record. But
unless the refcount was reduced to zero, we no longer have the right to
look in the record and, indeed, it may be deleted by some other thread.
Fix this by getting the debug_id out before decrementing the refcount and
then passing that into the tracepoint.
This can cause the following symptoms:
BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411
[inline]
BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0
net/rxrpc/peer_object.c:435
Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216
Fixes: 1159d4b496 ("rxrpc: Add a tracepoint to track rxrpc_peer refcounting")
Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
When sendmsg() finds a call to continue on with, if the call is in an
inappropriate state, it doesn't release the ref it just got on that call
before returning an error.
This causes the following symptom to show up with kasan:
BUG: KASAN: use-after-free in rxrpc_send_keepalive+0x8a2/0x940
net/rxrpc/output.c:635
Read of size 8 at addr ffff888064219698 by task kworker/0:3/11077
where line 635 is:
whdr.epoch = htonl(peer->local->rxnet->epoch);
The local endpoint (which cannot be pinned by the call) has been released,
but not the peer (which is pinned by the call).
Fix this by releasing the call in the error path.
Fixes: 37411cad63 ("rxrpc: Fix potential NULL-pointer exception")
Reported-by: syzbot+d850c266e3df14da1d31@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
There was supposed to be a trace indicating that a new peer had been
created. Add it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a misplaced traceline in rxrpc_input_packet() which is looking at a
packet that just got released rather than the replacement packet.
Fix this by moving the traceline after the assignment that moves the new
packet pointer to the actual packet pointer.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a local endpoint is ceases to be in use, such as when the kafs module
is unloaded, the kernel will emit an assertion failure if there are any
outstanding client connections:
rxrpc: Assertion failed
------------[ cut here ]------------
kernel BUG at net/rxrpc/local_object.c:433!
and even beyond that, will evince other oopses if there are service
connections still present.
Fix this by:
(1) Removing the triggering of connection reaping when an rxrpc socket is
released. These don't actually clean up the connections anyway - and
further, the local endpoint may still be in use through another
socket.
(2) Mark the local endpoint as dead when we start the process of tearing
it down.
(3) When destroying a local endpoint, strip all of its client connections
from the idle list and discard the ref on each that the list was
holding.
(4) When destroying a local endpoint, call the service connection reaper
directly (rather than through a workqueue) to immediately kill off all
outstanding service connections.
(5) Make the service connection reaper reap connections for which the
local endpoint is marked dead.
Only after destroying the connections can we close the socket lest we get
an oops in a workqueue that's looking at a connection or a peer.
Fixes: 3d18cbb7fd ("rxrpc: Fix conn expiry timers")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in-place decryption routines in AF_RXRPC's rxkad security module
currently call skb_cow_data() to make sure the data isn't shared and that
the skb can be written over. This has a problem, however, as the softirq
handler may be still holding a ref or the Rx ring may be holding multiple
refs when skb_cow_data() is called in rxkad_verify_packet() - and so
skb_shared() returns true and __pskb_pull_tail() dislikes that. If this
occurs, something like the following report will be generated.
kernel BUG at net/core/skbuff.c:1463!
...
RIP: 0010:pskb_expand_head+0x253/0x2b0
...
Call Trace:
__pskb_pull_tail+0x49/0x460
skb_cow_data+0x6f/0x300
rxkad_verify_packet+0x18b/0xb10 [rxrpc]
rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc]
rxrpc_kernel_recv_data+0x126/0x240 [rxrpc]
afs_extract_data+0x51/0x2d0 [kafs]
afs_deliver_fs_fetch_data+0x188/0x400 [kafs]
afs_deliver_to_call+0xac/0x430 [kafs]
afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs]
afs_make_call+0x282/0x3f0 [kafs]
afs_fs_fetch_data+0x164/0x300 [kafs]
afs_fetch_data+0x54/0x130 [kafs]
afs_readpages+0x20d/0x340 [kafs]
read_pages+0x66/0x180
__do_page_cache_readahead+0x188/0x1a0
ondemand_readahead+0x17d/0x2e0
generic_file_read_iter+0x740/0xc10
__vfs_read+0x145/0x1a0
vfs_read+0x8c/0x140
ksys_read+0x4a/0xb0
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by using skb_unshare() instead in the input path for DATA packets
that have a security index != 0. Non-DATA packets don't need in-place
encryption and neither do unencrypted DATA packets.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Use the previously-added transmit-phase skbuff private flag to simplify the
socket buffer tracing a bit. Which phase the skbuff comes from can now be
divined from the skb rather than having to be guessed from the call state.
We can also reduce the number of rxrpc_skb_trace values by eliminating the
difference between Tx and Rx in the symbols.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a flag in the private data on an skbuff to indicate that this is a
transmission-phase buffer rather than a receive-phase buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Abstract out rxtx ring cleanup into its own function from its two callers.
This makes it easier to apply the same changes to both.
Signed-off-by: David Howells <dhowells@redhat.com>
Pass the reference held on a DATA skb in the rxrpc input handler into the
Rx ring rather than getting an additional ref for this and then dropping
the original ref at the end.
Signed-off-by: David Howells <dhowells@redhat.com>
Use the information now cached in the skbuff private data to avoid the need
to reparse a jumbo packet. We can find all the subpackets by dead
reckoning, so it's only necessary to note how many there are, whether the
last one is flagged as LAST_PACKET and whether any have the REQUEST_ACK
flag set.
This is necessary as once recvmsg() can see the packet, it can start
modifying it, such as doing in-place decryption.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Improve the information stored about jumbo packets so that we don't need to
reparse them so much later.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
rxrpc_queue_local() attempts to queue the local endpoint it is given and
then, if successful, prints a trace line. The trace line includes the
current usage count - but we're not allowed to look at the local endpoint
at this point as we passed our ref on it to the workqueue.
Fix this by reading the usage count before queuing the work item.
Also fix the reading of local->debug_id for trace lines, which must be done
with the same consideration as reading the usage count.
Fixes: 09d2bf595d ("rxrpc: Add a tracepoint to track rxrpc_local refcounting")
Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
When a local endpoint (struct rxrpc_local) ceases to be in use by any
AF_RXRPC sockets, it starts the process of being destroyed, but this
doesn't cause it to be removed from the namespace endpoint list immediately
as tearing it down isn't trivial and can't be done in softirq context, so
it gets deferred.
If a new socket comes along that wants to bind to the same endpoint, a new
rxrpc_local object will be allocated and rxrpc_lookup_local() will use
list_replace() to substitute the new one for the old.
Then, when the dying object gets to rxrpc_local_destroyer(), it is removed
unconditionally from whatever list it is on by calling list_del_init().
However, list_replace() doesn't reset the pointers in the replaced
list_head and so the list_del_init() will likely corrupt the local
endpoints list.
Fix this by using list_replace_init() instead.
Fixes: 730c5fd42c ("rxrpc: Fix local endpoint refcounting")
Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called
on an unbound socket on which rx->local is not yet set.
The following reproduced (includes omitted):
int main(void)
{
socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
return 0;
}
causes the following oops to occur:
BUG: kernel NULL pointer dereference, address: 0000000000000010
...
RIP: 0010:rxrpc_unuse_local+0x8/0x1b
...
Call Trace:
rxrpc_release+0x2b5/0x338
__sock_release+0x37/0xa1
sock_close+0x14/0x17
__fput+0x115/0x1e9
task_work_run+0x72/0x98
do_exit+0x51b/0xa7a
? __context_tracking_exit+0x4e/0x10e
do_group_exit+0xab/0xab
__x64_sys_exit_group+0x14/0x17
do_syscall_64+0x89/0x1d4
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com
Fixes: 730c5fd42c ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't bother generating maxSkew in the ACK packet as it has been obsolete
since AFS 3.1.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
The object lifetime management on the rxrpc_local struct is broken in that
the rxrpc_local_processor() function is expected to clean up and remove an
object - but it may get requeued by packets coming in on the backing UDP
socket once it starts running.
This may result in the assertion in rxrpc_local_rcu() firing because the
memory has been scheduled for RCU destruction whilst still queued:
rxrpc: Assertion failed
------------[ cut here ]------------
kernel BUG at net/rxrpc/local_object.c:468!
Note that if the processor comes around before the RCU free function, it
will just do nothing because ->dead is true.
Fix this by adding a separate refcount to count active users of the
endpoint that causes the endpoint to be destroyed when it reaches 0.
The original refcount can then be used to refcount objects through the work
processor and cause the memory to be rcu freed when that reaches 0.
Fixes: 4f95dd78a7 ("rxrpc: Rework local endpoint management")
Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
