Commit Graph

855446 Commits

Author SHA1 Message Date
Arnd Bergmann
dfee0e99bc netfilter: bridge: make NF_TABLES_BRIDGE tristate
The new nft_meta_bridge code fails to link as built-in when NF_TABLES
is a loadable module.

net/bridge/netfilter/nft_meta_bridge.o: In function `nft_meta_bridge_get_eval':
nft_meta_bridge.c:(.text+0x1e8): undefined reference to `nft_meta_get_eval'
net/bridge/netfilter/nft_meta_bridge.o: In function `nft_meta_bridge_get_init':
nft_meta_bridge.c:(.text+0x468): undefined reference to `nft_meta_get_init'
nft_meta_bridge.c:(.text+0x49c): undefined reference to `nft_parse_register'
nft_meta_bridge.c:(.text+0x4cc): undefined reference to `nft_validate_register_store'
net/bridge/netfilter/nft_meta_bridge.o: In function `nft_meta_bridge_module_exit':
nft_meta_bridge.c:(.exit.text+0x14): undefined reference to `nft_unregister_expr'
net/bridge/netfilter/nft_meta_bridge.o: In function `nft_meta_bridge_module_init':
nft_meta_bridge.c:(.init.text+0x14): undefined reference to `nft_register_expr'
net/bridge/netfilter/nft_meta_bridge.o:(.rodata+0x60): undefined reference to `nft_meta_get_dump'
net/bridge/netfilter/nft_meta_bridge.o:(.rodata+0x88): undefined reference to `nft_meta_set_eval'

This can happen because the NF_TABLES_BRIDGE dependency itself is just a
'bool'.  Make the symbol a 'tristate' instead so Kconfig can propagate the
dependencies correctly.

Fixes: 30e103fe24 ("netfilter: nft_meta: move bridge meta keys into nft_meta_bridge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-19 18:08:14 +02:00
Fugang Duan
449fa54d68 dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
dma_map_sg() may use swiotlb buffer when the kernel command line includes
"swiotlb=force" or the dma_addr is out of dev->dma_mask range.  After
DMA complete the memory moving from device to memory, then user call
dma_sync_sg_for_cpu() to sync with DMA buffer, and copy the original
virtual buffer to other space.

So dma_direct_sync_sg_for_cpu() should use swiotlb physical addr, not
the original physical addr from sg_phys(sg).

dma_direct_sync_sg_for_device() also has the same issue, correct it as
well.

Fixes: 55897af63091("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-19 14:09:40 +02:00
Hui Wang
771a081e44 Input: alps - fix a mismatch between a condition check and its comment
In the function alps_is_cs19_trackpoint(), we check if the param[1] is
in the 0x20~0x2f range, but the code we wrote for this checking is not
correct:
(param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f,
it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f...

Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20).

Fixes: 7e4935ccc3 ("Input: alps - don't handle ALPS cs19 trackpoint-only device")
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19 12:40:35 +03:00
YueHaibing
49e6979e7e Input: psmouse - fix build error of multiple definition
trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:

drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 55e3d9224b ("Input: psmouse - allow disabing certain protocol extensions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19 11:58:50 +03:00
Mao Wenan
d56fef0ec8 Input: applespi - remove set but not used variables 'sts'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/input/keyboard/applespi.c: In function applespi_set_bl_level:
drivers/input/keyboard/applespi.c:902:6: warning: variable sts set but not used [-Wunused-but-set-variable]

Fixes: b426ac0452093d ("Input: add Apple SPI keyboard and trackpad driver")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19 11:58:49 +03:00
Ronald Tschalär
038b1a05ea Input: add Apple SPI keyboard and trackpad driver
The keyboard and trackpad on recent MacBook's (since 8,1) and
MacBookPro's (13,* and 14,*) are attached to an SPI controller instead
of USB, as previously. The higher level protocol is not publicly
documented and hence has been reverse engineered. As a consequence there
are still a number of unknown fields and commands. However, the known
parts have been working well and received extensive testing and use.

In order for this driver to work, the proper SPI drivers need to be
loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci;
for all others they are spi_pxa2xx_platform and intel_lpss_pci.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331
Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19 11:58:34 +03:00
Dexuan Cui
e320ab3cec x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section
5.2.1 "GPA Overlay Pages" for the details) and here is an excerpt:

"The hypervisor defines several special pages that "overlay" the guest's
 Guest Physical Addresses (GPA) space. Overlays are addressed GPA but are
 not included in the normal GPA map maintained internally by the hypervisor.
 Conceptually, they exist in a separate map that overlays the GPA map.

 If a page within the GPA space is overlaid, any SPA page mapped to the
 GPA page is effectively "obscured" and generally unreachable by the
 virtual processor through processor memory accesses.

 If an overlay page is disabled, the underlying GPA page is "uncovered",
 and an existing mapping becomes accessible to the guest."

SPA = System Physical Address = the final real physical address.

When a CPU (e.g. CPU1) is onlined, hv_cpu_init() allocates the VP ASSIST
PAGE and enables the EOI optimization for this CPU by writing the MSR
HV_X64_MSR_VP_ASSIST_PAGE. From now on, hvp->apic_assist belongs to the
special SPA page, and this CPU *always* uses hvp->apic_assist (which is
shared with the hypervisor) to decide if it needs to write the EOI MSR.

When a CPU is offlined then on the outgoing CPU:
1. hv_cpu_die() disables the EOI optimizaton for this CPU, and from
   now on hvp->apic_assist belongs to the original "normal" SPA page;
2. the remaining work of stopping this CPU is done
3. this CPU is completely stopped.

Between 1 and 3, this CPU can still receive interrupts (e.g. reschedule
IPIs from CPU0, and Local APIC timer interrupts), and this CPU *must* write
the EOI MSR for every interrupt received, otherwise the hypervisor may not
deliver further interrupts, which may be needed to completely stop the CPU.

So, after the EOI optimization is disabled in hv_cpu_die(), it's required
that the hvp->apic_assist's bit0 is zero, which is not guaranteed by the
current allocation mode because it lacks __GFP_ZERO. As a consequence the
bit might be set and interrupt handling would not write the EOI MSR causing
interrupt delivery to become stuck.

Add the missing __GFP_ZERO to the allocation.

Note 1: after the "normal" SPA page is allocted and zeroed out, neither the
hypervisor nor the guest writes into the page, so the page remains with
zeros.

Note 2: see Section 10.3.5 "EOI Assist" for the details of the EOI
optimization. When the optimization is enabled, the guest can still write
the EOI MSR register irrespective of the "No EOI required" value, but
that's slower than the optimized assist based variant.

Fixes: ba696429d2 ("x86/hyper-v: Implement EOI assist")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/ <PU1P153MB0169B716A637FABF07433C04BFCB0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
2019-07-19 09:48:15 +02:00
Dave Airlie
8ee7956256 Merge branch 'linux-5.3' of git://github.com/skeggsb/linux into drm-next
nouveau fixes and TU116 enablement.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5hZ3B4S9cVTPd2-Ug7dMSasLPJrWMyoDo4MOg8cbXWkA@mail.gmail.com
2019-07-19 17:28:38 +10:00
Dave Airlie
9fb7dc73b9 Merge tag 'drm-next-5.3-2019-07-18' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.3-2019-07-18:

amdgpu:
- Navi DC fix for secondary adapters
- Fix Navi flickering with high res panels
- Navi SMU fixes
- Vega20 SMU fixes
- Fixes for audio hotplug on HG systems
- Fix for potential integer overflows on large buffer
  migrations
- debugfs fixes for umr
- Various other small fixes

amdkfd:
- Apply noretry setting consistently
- Fix hang in eviction
- Properly clean up GWS on uninit

UAPI:
- clarify a comment on ctx priority

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718211525.3374-1-alexander.deucher@amd.com
2019-07-19 17:21:48 +10:00
Ben Skeggs
4d352dbd58 drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug
Appears to be fixed by "flcn/gp102-: improve implementation of
bind_context() on SEC2/GSP".

Tested on GP10[24678] and GV100.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:51 +10:00
Ben Skeggs
5210e967d3 drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP
Fixes various issues encountered while attempting to initialise ACR.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:51 +10:00
Yongxin Liu
09b90e2fe3 drm/nouveau: fix memory leak in nouveau_conn_reset()
In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.

So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.

Here the is the log showing memory leak.

unreferenced object 0xffff8c5480483c80 (size 192):
  comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s)
  hex dump (first 32 bytes):
    00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00  ...{T...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
    [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
    [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
    [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
    [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
    [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
    [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
    [<000000007e961c3e>] local_pci_probe+0x47/0xa0
    [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30
    [<0000000028da4805>] process_one_work+0x27c/0x660
    [<000000001d415b04>] worker_thread+0x22b/0x3f0
    [<0000000003b69f1f>] kthread+0x12f/0x150
    [<00000000c94c29b7>] ret_from_fork+0x3a/0x50

Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:51 +10:00
Ralph Campbell
d304654bd7 drm/nouveau/dmem: missing mutex_lock in error path
In nouveau_dmem_pages_alloc(), the drm->dmem->mutex is unlocked before
calling nouveau_dmem_chunk_alloc() as shown when CONFIG_PROVE_LOCKING
is enabled:

[ 1294.871933] =====================================
[ 1294.876656] WARNING: bad unlock balance detected!
[ 1294.881375] 5.2.0-rc3+ #5 Not tainted
[ 1294.885048] -------------------------------------
[ 1294.889773] test-malloc-vra/6299 is trying to release lock (&drm->dmem->mutex) at:
[ 1294.897482] [<ffffffffa01a220f>] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1294.905782] but there are no more locks to release!
[ 1294.910690]
[ 1294.910690] other info that might help us debug this:
[ 1294.917249] 1 lock held by test-malloc-vra/6299:
[ 1294.921881]  #0: 0000000016e10454 (&mm->mmap_sem#2){++++}, at: nouveau_svmm_bind+0x142/0x210 [nouveau]
[ 1294.931313]
[ 1294.931313] stack backtrace:
[ 1294.935702] CPU: 4 PID: 6299 Comm: test-malloc-vra Not tainted 5.2.0-rc3+ #5
[ 1294.942786] Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1401 05/21/2018
[ 1294.949590] Call Trace:
[ 1294.952059]  dump_stack+0x7c/0xc0
[ 1294.955469]  ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1294.962213]  print_unlock_imbalance_bug.cold.52+0xca/0xcf
[ 1294.967641]  lock_release+0x306/0x380
[ 1294.971383]  ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1294.978089]  ? lock_downgrade+0x2d0/0x2d0
[ 1294.982121]  ? find_held_lock+0xac/0xd0
[ 1294.985979]  __mutex_unlock_slowpath+0x8f/0x3f0
[ 1294.990540]  ? wait_for_completion+0x230/0x230
[ 1294.995002]  ? rwlock_bug.part.2+0x60/0x60
[ 1294.999197]  nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1295.005751]  ? page_mapping+0x98/0x110
[ 1295.009511]  migrate_vma+0xa74/0x1090
[ 1295.013186]  ? move_to_new_page+0x480/0x480
[ 1295.017400]  ? __kmalloc+0x153/0x300
[ 1295.021052]  ? nouveau_dmem_migrate_vma+0xd8/0x1e0 [nouveau]
[ 1295.026796]  nouveau_dmem_migrate_vma+0x157/0x1e0 [nouveau]
[ 1295.032466]  ? nouveau_dmem_init+0x490/0x490 [nouveau]
[ 1295.037612]  ? vmacache_find+0xc2/0x110
[ 1295.041537]  nouveau_svmm_bind+0x1b4/0x210 [nouveau]
[ 1295.046583]  ? nouveau_svm_fault+0x13e0/0x13e0 [nouveau]
[ 1295.051912]  drm_ioctl_kernel+0x14d/0x1a0
[ 1295.055930]  ? drm_setversion+0x330/0x330
[ 1295.059971]  drm_ioctl+0x308/0x530
[ 1295.063384]  ? drm_version+0x150/0x150
[ 1295.067153]  ? find_held_lock+0xac/0xd0
[ 1295.070996]  ? __pm_runtime_resume+0x3f/0xa0
[ 1295.075285]  ? mark_held_locks+0x29/0xa0
[ 1295.079230]  ? _raw_spin_unlock_irqrestore+0x3c/0x50
[ 1295.084232]  ? lockdep_hardirqs_on+0x17d/0x250
[ 1295.088768]  nouveau_drm_ioctl+0x9a/0x100 [nouveau]
[ 1295.093661]  do_vfs_ioctl+0x137/0x9a0
[ 1295.097341]  ? ioctl_preallocate+0x140/0x140
[ 1295.101623]  ? match_held_lock+0x1b/0x230
[ 1295.105646]  ? match_held_lock+0x1b/0x230
[ 1295.109660]  ? find_held_lock+0xac/0xd0
[ 1295.113512]  ? __do_page_fault+0x324/0x630
[ 1295.117617]  ? lock_downgrade+0x2d0/0x2d0
[ 1295.121648]  ? mark_held_locks+0x79/0xa0
[ 1295.125583]  ? handle_mm_fault+0x352/0x430
[ 1295.129687]  ksys_ioctl+0x60/0x90
[ 1295.133020]  ? mark_held_locks+0x29/0xa0
[ 1295.136964]  __x64_sys_ioctl+0x3d/0x50
[ 1295.140726]  do_syscall_64+0x68/0x250
[ 1295.144400]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1295.149465] RIP: 0033:0x7f1a3495809b
[ 1295.153053] Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
[ 1295.171850] RSP: 002b:00007ffef7ed1358 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1295.179451] RAX: ffffffffffffffda RBX: 00007ffef7ed1628 RCX: 00007f1a3495809b
[ 1295.186601] RDX: 00007ffef7ed13b0 RSI: 0000000040406449 RDI: 0000000000000004
[ 1295.193759] RBP: 00007ffef7ed13b0 R08: 0000000000000000 R09: 000000000157e770
[ 1295.200917] R10: 000000000151c010 R11: 0000000000000246 R12: 0000000040406449
[ 1295.208083] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000

Reacquire the lock before continuing to the next page.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:51 +10:00
Karol Herbst
68bf8b5779 drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads
fixes bogus values userspace gets from hwmon while the GPU is powered down

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:51 +10:00
Ben Skeggs
b0f84a84ff drm/nouveau: fix bogus GPL-2 license header
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
were simply missing the boiler plate and got caught up in the global update.

Fixes: 96ac6d4351 (treewide: Add SPDX license identifier - Kbuild)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:51 +10:00
Ilia Mirkin
b7019ac550 drm/nouveau: fix bogus GPL-2 license header
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.

Fixes: b24413180f (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Lyude Paul
7cb95eeea6 drm/nouveau/i2c: Enable i2c pads & busses during preinit
It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:

commit 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")

We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.

This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!

So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Marc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Ben Skeggs
3485b7b50b drm/nouveau/disp/tu102-: wire up scdc parameter setter
Regs seem valid here still, and tested on TU116.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Ben Skeggs
75dec321cd drm/nouveau/core: recognise TU116 chipset
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing
graphics/compute bring-up.

Each subsystem was compared with traces, along with various tests to check
that things generally work as they should, and appears compatible enough
with the current TU117 code to enable support.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Ben Skeggs
d108418478 drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel
clocks even where they shouldn't be.  This leads to a high resolution HDMI
displays, connected via a DVI->HDMI adapter, to fail on the original NV50.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Ilia Mirkin
533f475240 drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
Previously center scaling would get scaling applied to it (when it was
only supposed to center the image), and aspect-corrected scaling did not
always correctly pick whether to reduce width or height for a particular
combination of inputs/outputs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Ilia Mirkin
f8d6211ac7 drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes
Higher layers tend to add a lot of modes not actually in the EDID, such
as the standard DMT modes. Changing this would be extremely intrusive to
everyone, so just force the scaler more often. There are no practical
cases we're aware of where a LVDS/eDP panel has multiple resolutions
exposed, and i915 already does it this way.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Timo Wiren
bb2b4074f8 drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89.
Fix a crash or broken depth testing in all OpenGL applications that use the
depth buffer on MCP89 (GeForce 320M) seen on a MacBook Pro Late 2010.

The bug is tracked in https://bugs.freedesktop.org/show_bug.cgi?id=108500

Signed-off-by: Timo Wiren <timo.wiren@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19 16:26:50 +10:00
Guo Ren
bdfeb0ccea csky: Fixup abiv1 memset error
Current memset implementation in abiv1 is wrong and it'll cause unalign
access. Just remove it and use the generic one. This patch will cause
performance degradation and we will improve it with a new design in next
patchset.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19 14:21:36 +08:00
Guo Ren
4e562c1166 csky: Improve tlb operation with help of asid
There are two generations of tlb operation instruction for C-SKY.
First generation is use mcr register and it need software do more
things, second generation is use specific instructions, eg:
 tlbi.va, tlbi.vas, tlbi.alls

We implemented the following functions:

 - flush_tlb_range (a range of entries)
 - flush_tlb_page (one entry)

 Above functions use asid from vma->mm to invalid tlb entries and
 we could use tlbi.vas instruction for newest generation csky cpu.

 - flush_tlb_kernel_range
 - flush_tlb_one

 Above functions don't care asid and it invalid the tlb entries only
 with vpn and we could use tlbi.vaas instruction for newest generat-
 ion csky cpu.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19 14:21:36 +08:00
Guo Ren
22d55f02b8 csky: Use generic asid algorithm to implement switch_mm
Use linux generic asid/vmid algorithm to implement csky
switch_mm function. The algorithm is from arm and it could
work with SMP system. It'll help reduce tlb flush for
switch_mm in task/vm switch.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19 14:21:36 +08:00
Guo Ren
a231b8839c csky: Add new asid lib code from arm
This patch only contains asid help code from arm for next patch to
use.

The asid allocator use five level check to reduce the cost of
switch_mm.

 1. Check if the asid version is the same (it's general)
 2. Check reserved_asid which is set in rollover flush_context()
    and key point is to keep the same bit position with the current
    asid version instead of input version.
 3. Check if the position of bitmap is free then it could be set &
    used directly.
 4. find_next_zero_bit() (a little performance cost)
 5. flush_context  (this is the worst cost with increase current asid
    version)

Check is level by level and cost is also higher with the next level.
The reserved_asid and bitmap mechanism prevent unnecessary
find_next_zero_bit().

The atomic 64 bit asid is also suitable for 32-bit system and it
won't cost a lot in 1th 2th 3th level check.

The operation of set/clear mm_cpumask was removed in arm64 compared to
arm32. It seems no side effect on current arm64 system, but from
software meaning it's wrong. Although csky also needn't it, we add it
back for csky.

The asid_per_ctxt is no use for csky and it reserves the lowest bits for
other use, maybe: trust zone ? Ok, just keep it in csky copy.

Seems it also could be used by other archs and it's worth to move asid
code to generic in future.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Julien Grall <julien.grall@arm.com>
2019-07-19 14:21:36 +08:00
Guo Ren
9d35dc3006 csky: Revert mmu ASID mechanism
Current C-SKY ASID mechanism is from mips and it doesn't work well
with multi-cores. ASID per core mechanism is not suitable for C-SKY
SMP tlb maintain operations, eg: tlbi.vas need share the same asid
in all processors and it'll invalid the tlb entry in all cores with
the same asid.

This patch is prepare for new ASID mechanism.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19 14:21:36 +08:00
Mao Han
4d581034f9 dt-bindings: csky: Add csky PMU bindings
This patch adds the documentation to describe that how to add pmu node in
dts.

Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
2019-07-19 14:21:36 +08:00
Guo Ren
69d812f5eb dt-bindings: interrupt-controller: Update csky mpintc
Add trigger type setting for csky,mpintc. The driver also could
support #interrupt-cells <1> and it wouldn't invalidate existing
DTs. Here we only show the complete format.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
2019-07-19 14:21:36 +08:00
Guo Ren
e7534198ab csky: Fixup some error count in 810 & 860.
CK810 pmu only support event with index 0-8 and 0xd; CK860 only
support event 1~4, 0xa~0x1b. So do not register unsupport event
to hardware cache event, which may leader to unknown behavior.

Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-07-19 14:21:36 +08:00
Mao Han
d41435d9b2 csky: Fix perf record in kernel/user space
csky_pmu_event_init is called several times during the perf record
initialzation. After configure the event counter in either kernel
space or user space, csky_pmu_event_init is called twice with no
attr specified. Configuration will be overwritten with sampling in
both kernel space and user space. --all-kernel/--all-user is
useless without this patch applied.

Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19 14:21:36 +08:00
Mao Han
f622fbf205 csky: Add pmu interrupt support
This patch add interrupt request and handler for csky pmu.
perf can record on hardware event with this patch applied.

Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19 14:21:36 +08:00
Mao Han
ccffa1ad15 csky: Add count-width property for csky pmu
The csky pmu counter may have different io width. When the counter is
smaller then 64 bits and counter value is smaller than the old value, it
will result to a extremely large delta value. So the sampled value should
be extend to 64 bits to avoid this, the extension bits base on the
count-width property from dts.

Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19 14:21:36 +08:00
Mao Han
f132076c8f csky: Init pmu as a device
This patch change the csky pmu initialization from arch init to
device init. The pmu can be configued with information from
device tree(pmu device name, irq number and etc.).

Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19 14:21:36 +08:00
Guo Ren
3158d28953 csky: Fixup no panic in kernel for some traps
These traps couldn't be hanppen in kernel and we must panic there not
send a signal to userspace.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19 14:21:36 +08:00
Guo Ren
1994cc49f1 csky: Select intc & timer drivers
Let arch help to select interrupt controller's and timer's drivers
instead of people using menuconfig to select. This help the mini system
boot up.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19 14:21:36 +08:00
Eric Dumazet
8d650cdeda tcp: fix tcp_set_congestion_control() use from bpf hook
Neal reported incorrect use of ns_capable() from bpf hook.

bpf_setsockopt(...TCP_CONGESTION...)
  -> tcp_set_congestion_control()
   -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)
    -> ns_capable_common()
     -> current_cred()
      -> rcu_dereference_protected(current->cred, 1)

Accessing 'current' in bpf context makes no sense, since packets
are processed from softirq context.

As Neal stated : The capability check in tcp_set_congestion_control()
was written assuming a system call context, and then was reused from
a BPF call site.

The fix is to add a new parameter to tcp_set_congestion_control(),
so that the ns_capable() call is only performed under the right
context.

Fixes: 91b5b21c7c ("bpf: Add support for changing congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18 20:33:48 -07:00
Wei Yongjun
269b7c5ff7 ag71xx: fix return value check in ag71xx_probe()
In case of error, the function of_get_mac_address() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: d51b6ce441 ("net: ethernet: add ag71xx driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18 20:33:48 -07:00
Wei Yongjun
6f5fa8d2c0 ag71xx: fix error return code in ag71xx_probe()
Fix to return error code -ENOMEM from the dmam_alloc_coherent() error
handling case instead of 0, as done elsewhere in this function.

Fixes: d51b6ce441 ("net: ethernet: add ag71xx driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18 20:33:48 -07:00
Matteo Croce
eec4844fae proc/sysctl: add shared variables for range check
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range.  This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.

On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.

The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:

    $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
    248

Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.

This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:

    # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
    add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
    Data                                         old     new   delta
    sysctl_vals                                    -      12     +12
    __kstrtab_sysctl_vals                          -      12     +12
    max                                           14      10      -4
    int_max                                       16       -     -16
    one                                           68       -     -68
    zero                                         128      28    -100
    Total: Before=20583249, After=20583085, chg -0.00%

[mcroce@redhat.com: tipc: remove two unused variables]
  Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
  Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Keith Busch
371096949f mm: migrate: remove unused mode argument
migrate_page_move_mapping() doesn't use the mode argument.  Remove it
and update callers accordingly.

Link: http://lkml.kernel.org/r/20190508210301.8472-1-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
9a84503042 mm/sparsemem: cleanup 'section number' data types
David points out that there is a mixture of 'int' and 'unsigned long'
usage for section number data types.  Update the memory hotplug path to
use 'unsigned long' consistently for section numbers.

[akpm@linux-foundation.org: fix printk format]
Link: http://lkml.kernel.org/r/156107543656.1329419.11505835211949439815.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
a3619190d6 libnvdimm/pfn: stop padding pmem namespaces to section alignment
Now that the mm core supports section-unaligned hotplug of ZONE_DEVICE
memory, we no longer need to add padding at pfn/dax device creation
time.  The kernel will still honor padding established by older kernels.

Link: http://lkml.kernel.org/r/156092356588.979959.6793371748950931916.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
7e3e888dfc libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields
At namespace creation time there is the potential for the "expected to
be zero" fields of a 'pfn' info-block to be filled with indeterminate
data.  While the kernel buffer is zeroed on allocation it is immediately
overwritten by nd_pfn_validate() filling it with the current contents of
the on-media info-block location.  For fields like, 'flags' and the
'padding' it potentially means that future implementations can not rely on
those fields being zero.

In preparation to stop using the 'start_pad' and 'end_trunc' fields for
section alignment, arrange for fields that are not explicitly
initialized to be guaranteed zero.  Bump the minor version to indicate
it is safe to assume the 'padding' and 'flags' are zero.  Otherwise,
this corruption is expected to benign since all other critical fields
are explicitly initialized.

Note The cc: stable is about spreading this new policy to as many
kernels as possible not fixing an issue in those kernels.  It is not
until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to
section alignment" where this improper initialization becomes a problem.
So if someone decides to backport "libnvdimm/pfn: Stop padding pmem
namespaces to section alignment" (which is not tagged for stable), make
sure this pre-requisite is flagged.

Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 32ab0a3f51 ("libnvdimm, pmem: 'struct page' for pmem")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: <stable@vger.kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
7cc7867fb0 mm/devm_memremap_pages: enable sub-section remap
Teach devm_memremap_pages() about the new sub-section capabilities of
arch_{add,remove}_memory().  Effectively, just replace all usage of
align_start, align_end, and align_size with res->start, res->end, and
resource_size(res).  The existing sanity check will still make sure that
the two separate remap attempts do not collide within a sub-section (2MB
on x86).

Link: http://lkml.kernel.org/r/156092355542.979959.10060071713397030576.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: Michal Hocko <mhocko@suse.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
a0653406a3 mm: document ZONE_DEVICE memory-model implications
Explain the general mechanisms of 'ZONE_DEVICE' pages and list the users
of 'devm_memremap_pages()'.

[dan.j.williams@intel.com: update ZONE_DEVICE memory model documentation]
  Link: http://lkml.kernel.org/r/156109575458.1409767.1885676287099277666.stgit@dwillia2-desk3.amr.corp.intel.com
Link: http://lkml.kernel.org/r/156092354985.979959.15763234410543451710.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
ba72b4c8cf mm/sparsemem: support sub-section hotplug
The libnvdimm sub-system has suffered a series of hacks and broken
workarounds for the memory-hotplug implementation's awkward
section-aligned (128MB) granularity.

For example the following backtrace is emitted when attempting
arch_add_memory() with physical address ranges that intersect 'System
RAM' (RAM) with 'Persistent Memory' (PMEM) within a given section:

    # cat /proc/iomem | grep -A1 -B1 Persistent\ Memory
    100000000-1ffffffff : System RAM
    200000000-303ffffff : Persistent Memory (legacy)
    304000000-43fffffff : System RAM
    440000000-23ffffffff : Persistent Memory
    2400000000-43bfffffff : Persistent Memory
      2400000000-43bfffffff : namespace2.0

    WARNING: CPU: 38 PID: 928 at arch/x86/mm/init_64.c:850 add_pages+0x5c/0x60
    [..]
    RIP: 0010:add_pages+0x5c/0x60
    [..]
    Call Trace:
     devm_memremap_pages+0x460/0x6e0
     pmem_attach_disk+0x29e/0x680 [nd_pmem]
     ? nd_dax_probe+0xfc/0x120 [libnvdimm]
     nvdimm_bus_probe+0x66/0x160 [libnvdimm]

It was discovered that the problem goes beyond RAM vs PMEM collisions as
some platform produce PMEM vs PMEM collisions within a given section.
The libnvdimm workaround for that case revealed that the libnvdimm
section-alignment-padding implementation has been broken for a long
while.

A fix for that long-standing breakage introduces as many problems as it
solves as it would require a backward-incompatible change to the
namespace metadata interpretation.  Instead of that dubious route [1],
address the root problem in the memory-hotplug implementation.

Note that EEXIST is no longer treated as success as that is how
sparse_add_section() reports subsection collisions, it was also obviated
by recent changes to perform the request_region() for 'System RAM'
before arch_add_memory() in the add_memory() sequence.

[1] https://lore.kernel.org/r/155000671719.348031.2347363160141119237.stgit@dwillia2-desk3.amr.corp.intel.com

[osalvador@suse.de: fix deactivate_section for early sections]
  Link: http://lkml.kernel.org/r/20190715081549.32577-2-osalvador@suse.de
Link: http://lkml.kernel.org/r/156092354368.979959.6232443923440952359.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
7ea6216049 mm/sparsemem: prepare for sub-section ranges
Prepare the memory hot-{add,remove} paths for handling sub-section
ranges by plumbing the starting page frame and number of pages being
handled through arch_{add,remove}_memory() to
sparse_{add,remove}_one_section().

This is simply plumbing, small cleanups, and some identifier renames.
No intended functional changes.

Link: http://lkml.kernel.org/r/156092353780.979959.9713046515562743194.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00
Dan Williams
46d945aeab mm: kill is_dev_zone() helper
Given there are no more usages of is_dev_zone() outside of 'ifdef
CONFIG_ZONE_DEVICE' protection, kill off the compilation helper.

Link: http://lkml.kernel.org/r/156092353211.979959.1489004866360828964.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: Michal Hocko <mhocko@suse.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:07 -07:00