GP10B's power is managed by generic PM domains, so it does not require a
VDD regulator. Add this option into the chip function structure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GR is similar to GP100, with a few unavailable registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B requires a specific initialization sequence due to the absence of
devinit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's MC is compatible with GP100's, but engines need to be explicitly
put out of ELPG during init.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's FB is largely compatible with the GP100 implementation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's FIFO is similar to GP100's, but only allows 512 channels.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The GP10B firmware is very close to GM20B's. The only difference is that
it supports booting multiple falcons. In order to avoid having too much
functions and structures shared, implement its support in the same
source file as GM20B firmware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's secboot is largely similar to GM20B's. Only differences are MC
base address and the fact that GPCCS is also securely managed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow the MC base address to be specified as an argument for the WPR
region reading function. GP10B uses a different address layout as GM20B,
so this is necessary. Also export the function to be used by GP10B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The LS firmware post-run hook is the right place to start said LS
firmware. Moving it here also allows to remove special handling in the
ACR code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A LS post-run hook can meet an error meaning the failure of secure boot.
Make sure this can be reported.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having access to the secboot instance loading a LS firmware can be
useful to LS firmware handlers. At least more useful than just having an
out-of-context subdev pointer.
GP10B's firmware will also need to know the WPR address, which can be
obtained from the secboot instance.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Change the secboot and msgqueue interfaces to take a mask of falcons to
reset instead of a single falcon. The GP10B firmware interface requires
FECS and GPCCS to be booted in a single firmware command.
For firmwares that only support single falcon boot, it is trivial to
loop over the mask and boot each falcons individually.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The gk20a implementation of instance memory uses vmap()/vunmap() to map
memory regions into the kernel's virtual address space. These functions
may sleep, so protecting them by a spin lock is not safe. This triggers
a warning if the DEBUG_ATOMIC_SLEEP Kconfig option is enabled. Fix this
by using a mutex instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP106 implementation.
Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the atomic support was added to nouveau, the DRM core did not do this.
However, later in the same merge window, a commit (drm/fence: add in-fences
support) was merged that added it, leading to use-after-frees of the fence
object.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.
Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
RCAR GEN3 DU HDMI support.
* 'drm/next/du' of git://linuxtv.org/pinchartl/media: (22 commits)
drm: rcar-du: Add HDMI outputs to R8A7795 device description
drm: rcar-du: Add DPLL support
drm: rcar-du: Skip disabled outputs
drm: rcar-du: Add Gen3 HDMI encoder support
dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindings
drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONE
drm: rcar-du: Replace manual bridge implementation with DRM bridge
drm: rcar-du: Add support for LVDS mode selection
drm: rcar-du: Use the DRM panel API
drm: rcar-du: Document the vsps property in the DT bindings
drm: rcar-du: Remove wait field from rcar_du_device structure
drm: rcar-du: Make sure the VSP is initialized on platforms that need it
drm: rcar-du: Use DRM core's atomic commit helper
drm: rcar-du: Clear handled event pointer in CRTC state
drm: rcar-du: Handle event when disabling CRTCs
drm: rcar-du: Don't open code of_device_get_match_data()
drm: rcar-du: Switch to encoder .atomic_mode_set() helper function
drm: panels: Add LVDS panel driver
drm: Add data transmission order bus flag
devicetree/bindings: display: Add bindings for two Mitsubishi panels
...
Update the device description with the two available HDMI outputs.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The implementation hardcodes a workaround for the H3 ES1.x SoC
regardless of the SoC revision, as the workaround can be safely applied
on all devices in the Gen3 family without any side effect.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When a DT node connected to a DU output is disabled no bridge will ever
be instantiated for it. Skip the output in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car Gen3 SoCs include on-chip DesignWare HDMI encoders. Support
them with a platform driver to provide platform glue data to the dw-hdmi
driver.
The driver is a complete rewrite of code coming from the Renesas BSP,
save for the values in the PHY parameters table.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The Renesas R-Car Gen3 SoCs use a Synopsys DWC HDMI TX encoder IP. Add
corresponding device tree bindings based on the DWC HDMI TX bindings
model.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Unlike the connector type, the encoder type is unused by userspace. As
it is equally unused in the driver, except in a single location where
the connector type can be used instead, hardcode it to
DRM_MODE_ENCODER_NONE. This allow removing all code that tries to
determine (unsuccessfully in case a bridge is used) the encoder type.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar-du driver contains a manual implementation of HDMI and VGA
bridges. Use DRM bridges to replace it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Retrieve the LVDS mode from the panel and configure the LVDS encoder
accordingly. LVDS mode selection is static as LVDS panels can't be
hot-plugged on any of the device supported by the driver. Support for
dynamic mode selection can be implemented in the future when needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instead of parsing the panel device tree node manually, use the panel
API to delegate panel handling to a panel driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The property is used by the driver but is missing from the DT bindings.
Document it.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The field is a left-over from the switch to the atomic commit helper.
It's unused, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On Gen3 platforms planes are managed by the external VSP compositor on
behalf of DRM/KMS. If VSP compositor support is not enabled in the DU
driver, the VSP initialization stub routine is called. Return an error
from that stub to fail explicitly, otherwise the device won't be usable
and the driver will crash.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Clarified commit message]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The atomic commit helper requires drivers to clear the event pointer
stored in the CRTC state when the event is handled. In preparation to
using the helper, fix the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The driver currently handles vblank events only when updating planes on
a CRTC. The atomic update API however allows requesting an event when
disabling a CRTC. This currently leads to event objects being leaked in
the kernel and to events not being sent out. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The native encoder mode set helper function for atomic drivers is
.atomic_mode_set(). Replace the legacy .mode_set() implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The flags indicate whether data is transmitted LSB to MSB or MSB to LSB
on the bus.
The exact meaning is bus-type dependent. For instance, for LVDS buses
the flags indicate whether the seven data bits transmitted in a clock
pulse are sent in normal order (MSB to LSB, slots 0 to 6) or reverse
order (LSB to MSB, slots 6 to 0).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
The AA104XD12 and AA121TD01 are LVDS display panels. Their bindings are
modelled on the the LVDS panel bindings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A.
Multiple incompatible data link layers have been used over time to
transmit image data to LVDS panels. This binding supports display panels
compatible with the JEIDA-59-1999, Open-LDI and VESA SWPG
specifications.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Document properties common to several display panels in a central
location that can be referenced by the panel device tree bindings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Main changes include:
* Add support for render nodes.
* Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support.
* Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display.
* Improve detection of display stack readiness, which should remove the probe order issues.
* Link panel-dpi with its backlight, so that they are turned on/off in sync.
* Fix possibly incorrect setup of sync and data-enable signals.
* Get rid of DRM_OMAP_NUM_CRTCS config option.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJY4h+/AAoJEPo9qoy8lh71PW4P/RtFifJ0TiykSQlIRiW2Uv/k
n1qyT0lw4Xl5tjTIILD5B7P235R4uwx6VvzKLYDmeWVPV+CyViNn3moEVm6ZlRXA
uLT/XmsseyrFWBqRXtv1w9kkmdaYMtz2u59rCzV6btqFaYiFLbzxmPlnxgYVOWjW
v1RT2FuAXg0tNRpSgLrg4/QMwxItij+Xf/lkgRJoGnZPANfnW8wXrXlf9hiETsIK
5Tu1iZuXiu+llxFdMeLxuAy7Z1dhRc9sdvnytoWrKd/L5GLo7S+l2OaTqM/MhMMi
Kt0f2NOdWbXx+UYZjaquOW0t3MIl9pivk/N+xlM6e4m0LF/4ik3lJTUR9+MwjOcG
tjvVEmw3k7awB0MjQIUJkRxxjjwZQ5Cn8SGKY8fA7XwAPhRVKooK1YiQwdGsJsAl
ldr2yOD11W9no86AK13N+vT51R8rN/jUsWgsQyAb+JN7ArwCAD7bL9bm+0NFKIL6
el/MD7BqnnL9gEAqt2hSFmdQhZY44CTN8s6sm8B6o0Tx74OsAy4AgLE/vLFwatVX
3TeLIsbqILlyuhyIme3CMeA7vlFWTzTxWdIXoChdpkWWm7Y8tPuGwTcsm2wOxT0r
8Y5qYER6sLdctMyoJQwfh1N2sPaDqC+EQcn48+gzl7SQXKSnd3PozwrQy0AbZdtY
VG6gXTV0lAcurgcJs/yR
=iaf8
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for 4.12
Main changes include:
* Add support for render nodes.
* Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support.
* Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display.
* Improve detection of display stack readiness, which should remove the probe order issues.
* Link panel-dpi with its backlight, so that they are turned on/off in sync.
* Fix possibly incorrect setup of sync and data-enable signals.
* Get rid of DRM_OMAP_NUM_CRTCS config option.
* tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (34 commits)
drm/omap: Major omap_modeset_init() cleanup
drm/omap: Remove the obsolete #define omap_plane _omap_plane hack
drm/omap: Fix one ugly indentation style break left by coccinelle
drm/omap: Rename enum omap_plane to enum omap_plane_id
drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option
drm/omap: fix crash on module unload
drm/omap: use drm_atomic_helper_shutdown()
drm/omap: fix display SYNC/DE flags
drm/omap: dispc: improve debug print of display flags
drm/omap: displays: panel-dpi: Support for handling backlight devices
drm/omap: poll only connectors where the connect/disconnect can be checked
drm/omap: display: Add displays in sorted order to the panel_list
drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up
drm/omap: dss: Support for detecting display stack readiness
drm/omap: dss: Functions to check components in the display/output list
drm/omap: fix replication logic
drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled
drm/omap: remove all EXPORT_SYMBOLs from dispc.c
drm/omap: use dispc_ops
drm/omap: fill dispc_ops
...
Cleanup overly complex omap_modeset_init(). The function is trying to
support many unusual configuration, that have never been tested and
are not supported by other parts of the dirver.
After cleanup the init function creates exactly one connector,
encoder, crtc, and primary plane per each connected dss-device. Each
connector->encoder->crtc chain is expected to be separate and each
crtc is connect to a single dss-channel. If the configuration does not
match the expectations or exceeds the available resources, the
configuration is rejected.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Remove the obsolete "#define omap_plane _omap_plane" hack and other
related hacks to get around the enum omap_plane colliding with struct
omap_plane.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
