This is similar to a patch I wrote several months ago. It's been updated
for the new FORCEWAKE_MT. As recommended by Chris Wilson, use WARN()
instead of DRM_ERROR, so we can get a backtrace.
This shouldn't impact performance too much as the extra register read
can replace the POSTING_READ we had previously.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add register definitions for GTFIFODBG, and clear it during init time to
make sure state is correct.
This register tells us if either a read, or a write occurred while the
fifo was full. It seems like bit 2 is an OR of bit 0 and bit 1, so we
check that as well, but the documents are not quite clear.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by (v1): Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I'm not sure why they are needed (I didn't notice any difference in my
tests), but these bits are in our documentation and they are also set by
the Windows driver.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The drm core _really_ likes to frob around with the crtc timings and
put halfed vertical timings (in fields) in there. Which confuses the
overlay code, resulting in it's refusal to display anything at the
lower half of an interlaced pipe.
Tested-by: Christopher Egert <cme3000@gmail.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Ross <pross@xvid.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Ross <pross@xvid.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The hw seems to use this to correctly insert the required delay
before/after an even/odd interlaced field. This might also explain
why we need to substract 1 half-line from vtotal - if the hw just
adds the delay programmend in VSYNCSHIFT the total frame time would be
about that too long.
These registers seems to only exist on gen4 and later. For paranoia
also program it to 0 for progressive modes, but according to
documentation the hw should just ignore it in this case.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
gen2 doesn't support it, so be a bit more paranoid and add a check to
ensure that we never ever set an unsupported interlaced bit.
Ensure that userspace can't set an interlaced mode by resetting
interlace_allowed for the crt on gen2. dvo and lvds are the only other
encoders that gen2 supports and these already disallow interlaced
modes.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to Paulo Zanoni, this is what windows does.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to bspec, we need to subtract an additional line from vtotal
for interlaced modes and vblank_end needs to equal vtotal. All other
timing fields do not need this special treatment, so kill it.
Bspec says that this is irrespective of whether the interlaced mode
has an odd or even vtotal, both modes are supported.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have a pretty decent confusion about vertical timings of interlaced
modes. Peter Ross has written a patch that makes interlace modes work
on a lot more platforms/output combinations by doubling the vertical
timings.
The issue with that patch is that core drm _does_ support specifying
whether we want these vertical timings in fields or frames, we just
haven't managed to consistently use this facility. The relavant
function is drm_mode_set_crtcinfo, which fills in the crtc timing
information.
The first thing to note is that the drm core keeps interlaced modes in
frames, but displays modelines in fields. So when the crtc modeset
helper copies over the mode into adjusted_mode it will already contain
vertical timings in half-frames. The result is that the fixup code in
intel_crtc_mode_fixup doesn't actually do anything (in most cases at
least).
Now gen3+ natively supports interlaced modes and wants the vertical
timings in frames. Which is what sdvo already fixes up, at least under
some conditions.
There are a few other place that demand vertical timings in fields
but never actually deal with interlaced modes, so use frame timings
for consistency, too. These are:
- lvds panel,
- dvo encoders - dvo is the only way gen2 could support interlaced
mode, but currently we don't support any encoders that do.
- tv out - despite that the tv dac sends out an interlaced signal it
expects a progressive mode pipe configuration.
All these encoders enforce progressive modes by resetting
interlace_allowed.
Hence we always want crtc vertical timings in frames. Enforce this in
our crtc mode_fixup function and rip out any redudant timing
computations from the encoders' mode_fixup function.
v2-4: Adjust the vertical timings a bit.
v5: Split out the 'subtract-one for interlaced' fixes.
v6: Clarify issues around tv-out and gen2.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Clarify which bits are for which chips.
- Note that gen2 can't do interlaced directly (only via dvo tv chips).
- Move the mask to the top to make it clearer how wide this field is.
- Add defintions for all possible values.
This patch doesn't change any code.
v2: Paulo Zanoni pointed out that the pixel doubling modes do no
longer exist on ivb.
Cc: Peter Ross <pross@xvid.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Back-merge from drm-fixes into drm-intel-next to sort out two things:
- interlaced support: -fixes contains a bugfix to correctly clear
interlaced configuration bits in case the bios sets up an interlaced
mode and we want to set up the progressive mode (current kernels
don't support interlaced). The actual feature work to support
interlaced depends upon (and conflicts with) this bugfix.
- forcewake voodoo to workaround missed IRQ issues: -fixes only enabled
this for ivybridge, but some recent bug reports indicate that we
need this on Sandybridge, too. But in a slightly different flavour
and with other fixes and reworks on top. Additionally there are some
forcewake cleanup patches heading to -next that would conflict with
currrent -fixes.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to unconditionally enable ppgtt for two reasons:
- Windows uses this on snb and later.
- We need the basic hw support to work before we can think about real
per-process address spaces and other cool features we want.
But Chris Wilson was complaining all over irc and intel-gfx that this
will blow up if we don't have a module option to disable it. Hence add
one, to prevent this.
ppgtt support seems to slightly change the timings and make crashy
things slightly more or less crashy. Now in my testing and the testing
this got on troublesome snb machines, it seems to have improved things
only. But on ivb it makes quite a few crashes happen much more often,
see
https://bugs.freedesktop.org/show_bug.cgi?id=41353
Luckily Eugeni Dodonov seems to have a set of workarounds that fix
this issue.
v2: Don't try to enable ppgtt on pre-snb.
v3: Pimp commit message and make Chris Wilson less grumpy by adding a
module option.
v4: New try at making Chris Wilson happy.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was pretty usefull for debugging, might be useful for diagnosing
issues.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split out for easier cross-checking of the boring pieces with bspec.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This adds support to bind/unbind objects and wires it up. Objects are
only put into the ppgtt when necessary, i.e. at execbuf time.
Objects are still unconditionally put into the global gtt.
v2: Kill the quick hack and explicitly pass cache_level to ppgtt_bind
like for the global gtt function. Noticed by Chris Wilson.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This just adds the setup and teardown code for the ppgtt PDE and the
last-level pagetables, which are fixed for the entire lifetime, at
least for the moment.
v2: Kill the stray debug printk noted by and improve the pte
definitions as suggested by Chris Wilson.
v3: Clean up the aperture stealing code as noted by Ben Widawsky.
v4: Paint the init code in a more pleasing colour as suggest by Chris
Wilson.
v5: Explain the magic numbers noticed by Ben Widawsky.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson and me have again stared at funny error states and it's
been pretty clear from the start that something was seriously amiss.
The seqnos last seen by the cpu were a few hundred behind those that
the gpu could have possibly emitted last before it died ...
Chris now tracked it down (hopefully, definit verdict's still out),
but in hindsight we'd have found the bug by simply dumping the cpu
side tracking of the ring head and tail registers.
Fix this and prevent an identical time-waster in the future.
Because the hangs always involved semaphores in one way or another,
we've tried to dump the mbox registers, but couldn't find any
inconsistencies. Still, dump them too.
Reviewed-and-wanted-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These are all user-trigerable, so tune down their loudness a notch.
For some of these we have i-g-t tests (because they prevent
newly-discovered bugs), without this patches running the test suite
leaves behind a dirty dmesg.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On gen5 we also need to correctly set up swizzling in the display
scanout engine, but only there. Consolidate this into the same
function.
This has a small effect on ums setups - the kernel now also sets this
bit in addition to userspace setting it. Given that this code only
runs when userspace either can't (resume, gpu reset) or explicitly
won't(gem_init) touch the hw this shouldn't have an adverse effect.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have to do this manually. Somebody had a Great Idea.
I've measured speed-ups just a few percent above the noise level
(below 5% for the best case), but no slowdows. Chris Wilson measured
quite a bit more (10-20% above the usual snb variance) on a more
recent and better tuned version of sna, but also recorded a few
slow-downs on benchmarks know for uglier amounts of snb-induced
variance.
v2: Incorporate Ben Widawsky's preliminary review comments and
elaborate a bit about the performance impact in the changelog.
v3: Add a comment as to why we don't need to check the 3rd memory
channel.
v4: Fixup whitespace.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
An identical patch has been merged for i9xx_crtc_mode_set:
Commit 59df7b1771
Author: Christian Schmidt <schmidt@digadd.de>
Date: Mon Dec 19 20:03:33 2011 +0100
drm/intel: Fix initialization if startup happens in interlaced mode [v2]
But that one neglected to fix up the ironlake+ path.
This should fix the issue reported by Alfonso Fiore where booting with
only a HDMI cable connected to his TV failed to display anything. The
issue is that the bios set up things for 1080i and used the pannel
fitter to scale up the lower progressive resolutions. We failed to
clear the interlace bit in the PIPEACONF register, resulting in havoc.
v2: Be more paranoid and just unconditionally clear the field before
setting new values.
Cc: Peter Ross <pross@xvid.org>
Cc: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
According to a bug report, it doesn't have one.
Cc: stable@kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
It is never correct to use intel_crtc->bpp in intel_dp_link_required,
so instead pass an explicit bpp in to this function. This patch
only supports 18bpp and 24bpp modes, which means that 10bpc modes will
be computed incorrectly. Fixing that will require more extensive
changes, and so must be addressed separately from this bugfix.
intel_dp_link_required is called from intel_dp_mode_valid and
intel_dp_mode_fixup.
* intel_dp_mode_valid is called to list supported modes; in this case,
the current crtc values cannot be relevant as the modes in question
may never be selected. Thus, using intel_crtc->bpp is never right.
* intel_dp_mode_fixup is called during mode setting, but it is run
well before ironlake_crtc_mode_set is called to set intel_crtc->bpp,
so using intel_crtc-bpp in this path can only ever get a stale
value.
Cc: Lubos Kolouch <lubos.kolouch@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42263
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44881
Tested-by: Dave Airlie <airlied@redhat.com>
Tested-by: camalot@picnicpark.org (Dell Latitude 6510)
Tested-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
As the buffer is not necessarily accessible through the GTT at the time
of a GPU hang, and capturing some of its contents is far more valuable
than skipping it, provide a clflushed fallback read path. We still
prefer to read through the GTT as that is more consistent with the GPU
access of the same buffer. So example it will demonstrate any errorneous
tiling or swizzling of the command buffer as seen by the GPU.
This becomes necessary with use of CPU relocations and lazy GTT binding,
but could potentially happen anyway as a result of a pathological error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Like for shmem_pwrite_slow. The only difference is that because we
read data, we can leave the fetched cachelines in the cpu: In the case
that the object isn't in the cpu read domain anymore, the clflush for
the next cpu read domain invalidation will simply drop these
cachelines.
slow_shmem_bit17_copy is now ununsed, so kill it.
With this patch tests/gem_mmap_gtt now actually works.
v2: add __ to copy_to_user_swizzled as suggested by Chris Wilson.
v3: Fixup the swizzling logic, it swizzled the wrong pages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38115
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... instead of get_user_pages, because that fails on non page-backed
user addresses like e.g. a gtt mapping of a bo.
To get there essentially copy the vfs read path into pagecache. We
can't call that right away because we have to take care of bit17
swizzling. To not deadlock with our own pagefault handler we need
to completely drop struct_mutex, reducing the atomicty-guarantees
of our userspace abi. Implications for racing with other gem ioctl:
- execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's
already the risk of the pwrite call not being atomic, no degration.
- read/write access to mmaps: already fully racy, no degration.
- set_tiling: Calling set_tiling while reading/writing is already
pretty much undefined, now it just got a bit worse. set_tiling is
only called by libdrm on unused/new bos, so no problem.
- set_domain: When changing to the gtt domain while copying (without any
read/write access, e.g. for synchronization), we might leave unflushed
data in the cpu caches. The clflush_object at the end of pwrite_slow
takes care of this problem.
- truncating of purgeable objects: the shmem_read_mapping_page call could
reinstate backing storage for truncated objects. The check at the end
of pwrite_slow takes care of this.
v2:
- add missing intel_gtt_chipset_flush
- add __ to copy_from_user_swizzled as suggest by Chris Wilson.
v3: Fixup bit17 swizzling, it swizzled the wrong pages.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The gtt_pwrite slowpath grabs the userspace memory with
get_user_pages. This will not work for non-page backed memory, like a
gtt mmapped gem object. Hence fall throuh to the shmem paths if we hit
-EFAULT in the gtt paths.
Now the shmem paths have exactly the same problem, but this way we
only need to rearrange the code in one write path.
v2: v1 accidentaly falls back to shmem pwrite for phys objects. Fixed.
v3: Make the codeflow around phys_pwrite cleara as suggested by Chris
Wilson.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will also come handy for the gen6+ swizzling support, where the
driver is supposed to control swizzling depending upon dram
configuration.
v2: CxDRB3 are 16 bit regs! Noticed by Chris Wilson.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It looks like the desktop variants of i915 and i945 also have the DCC
register to control dram channel interleave and cpu side bit6
swizzling.
Unfortunately internal Cspec/ConfigDB documentation for these ancient chips
have already been dropped and there seem to be no archives. Also
somebody thought the swizzling behaviour is surely a worthy secret to
keep and redacted any mention of these fields from the published Intel
datasheets.
I suspect the hw engineers were really proud of the page coloring
they've achieved in their first dual channel dram controller with
bit17 - after all Bspec explains in great length the optimal layout of
page frame numbers modulo 4 for the color and depth buffers, too.
Later on when they've started to work on VT-d they shamefully
discoverd their stupidity and tried to cover the tracks ...
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> (i915g)
Tested-by: Pavel Ondračka <pavel.ondracka@email.cz> (i945g)
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42625
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The original intention of comparing the bo against the mappable GTT
limits was to prevent a subsequent faulting of the bo into the GTT from
clearing the entire GTT in vain. However, that was clearly a cut'n'paste
mistake as a CPU mapping never binds the bo into the aperture. Whilst
there may be some merit to limiting the maximum size of the bo to
something that can be utilized by the GPU, that limit itself does not
belong as a safeguard to mmapping the bo, so remove the check entirely.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was pretty handy when figuring out what exactly went wrong with
ppgtt and it might also be useful when we stop filling the entire gart
with scratch page entries.
Also add the gen6+ DONE reg while at it.
v2: Chris Wilson suggested to allocate the error_state with kzalloc
for better paranoia. Also kill existing spurious clears of the
error_state while at it.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This confuses our domain tracking and can (for gtt write domains) lead
to a subsequent oops.
Tested by tests/gem_exec_bad_domains from i-g-t.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the error_state facility in place, this has outlived it's
usefulness. It also oopses with the lates llc-reloc patches because
it directly access objects through the gtt without any checks.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since quite a while we also the basic output configuration in the
error_state, so it should contain enough information to diagnose
these MI_WAIT hangs.
Reviewed-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All r/w debugfs files are created equal.
v2: Add some newlines to make the code easier on the eyes as requested
by Ben Widawsky.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only forcewake has an open with special semantics, the other r/w
debugfs only assign the file private pointer.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the fence accounting fixed up in the previous commit not finding
enough fences is a fatal error and userspace bug. Trashing the entire
gtt is not gonna turn up that missing fence, so don't to this by
returning another error thatn ENOSPC.
This has the added benefit that it's easier to distinguish fence
accounting errors from gtt space accounting issues.
TTM serves as precendence for the EDEADLK error code - it returns it
when the reservation code needs resources already blocked by the
current reservation.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to correctly account for reserving space in the GTT and fences
for a batch buffer, we need to independently track whether the fence is
pinned due to a fenced GPU access in the batch or whether the buffer is
pinned in the aperture. Currently we count the fenced as pinned if the
buffer has already been seen in the execbuffer. This leads to a false
accounting of available fence registers, causing frequent mass evictions.
Worse, if coupled with the change to make i915_gem_object_get_fence()
report EDADLK upon fence starvation, the batchbuffer can fail with only
one fence required...
Fixes intel-gpu-tools/tests/gem_fenced_exec_thrash
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38735
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Paul Neumann <paul104x@yahoo.de>
[danvet: Resolve the functional conflict with Jesse Barnes sprite
patches, acked by Chris Wilson on irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was just to facilitate product enablement with pre-production hw.
Allows us to kill quite a bit of cruft.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on a patch by Ben Widawsky, but with different colors
for the bikeshed.
In contrast to Ben's patch this one doesn't add the fault regs.
Afaics they're for the optional page fault support which
- we're not enabling
- and which seems to be unsupported by the hw team. Recent bspec
lacks tons of information about this that the public docs released
half a year back still contain.
Also dump ring HEAD/TAIL registers - I've recently seen a few
error_state where just guessing these is not good enough.
v2: Also dump INSTPM for every ring.
v3: Fix a few really silly goof-ups spotted by Chris Wilson.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The code already got unwieldy and we want to dump more per-ring
registers.
Only functional change is that we now also capture the video
ring registers on ilk.
v2: fixup a refactor fumble spotted by Chris Wilson.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... and add a helpr function for the places where we want a flag.
This way we can use ring->id to index into arrays.
v2: Resurrect the missing beautification-space Chris Wilson noted.
I'm moving this space around because I'll reuse ring_str in the next
patch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It should be programmed to "0" for HDMI or "1" for DisplayPort.
This enables DisplayPort audio for
- HP EliteBook 8460p
(whose BIOS does not set the N_value_index bit for us)
- DisplayPort monitor hot plugged after boot
(otherwise most BIOS will fill the N_value_index bit for us)
Tested-by: Robert Lemaire <rlemaire@suse.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
An identical patch has been merged for i9xx_crtc_mode_set:
Commit 59df7b1771
Author: Christian Schmidt <schmidt@digadd.de>
Date: Mon Dec 19 20:03:33 2011 +0100
drm/intel: Fix initialization if startup happens in interlaced mode [v2]
But that one neglected to fix up the ironlake+ path.
This should fix the issue reported by Alfonso Fiore where booting with
only a HDMI cable connected to his TV failed to display anything. The
issue is that the bios set up things for 1080i and used the pannel
fitter to scale up the lower progressive resolutions. We failed to
clear the interlace bit in the PIPEACONF register, resulting in havoc.
Cc: Peter Ross <pross@xvid.org>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Enabling FBC is causing the BLT ring to run between 10-100x slower than
normal and frequently lockup. The interim solution is disable FBC once
more until we know why.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is only relevant when using module unloading, and really only helps
get rid of a probably benign warning.
I can't remember if I sent this out already, but it's not turning up in
any of my searches.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After the ILK vt-d workaround patches it became clear that we had
introduced a bug. Chris Wilson tracked down the issue to recursive
calls to unmap. This happens because we try to optimize waiting on
requests by calling retire requests after the wait, which may drop the
last reference on an object and end up freeing the object (and then
unmap the object from the gtt).
After the last patch we can now choose to defer processing the retire
list.
Kudos to Chris Wilson for tracking this one down.
This patch fixes gem_unref_active_buffers from i-g-t. It was tested by
forcing do_idle_maps to true.
This also fixes tests/gem_linear_blits in intel-gpu-tools.
Reported-by: guang.a.yang@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>