Commit Graph

3098 Commits

Author SHA1 Message Date
Alex Deucher
bda44c1ae7 drm/radeon/dpm: add late_enable for trinity
Need to wait to enable cg and pg until after
ring tests. Also make sure interrupts are enabled
before we enable thermal interrupts.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:55:53 -05:00
Alex Deucher
14ec9faba3 drm/radeon/dpm: add late_enable for sumo
Need to wait to enable cg and pg until after
ring tests. Also make sure interrupts are enabled
before we enable thermal interrupts.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:55:39 -05:00
Alex Deucher
a3f1124515 drm/radeon/dpm: add late_enable for rv7xx-NI
Make sure interrupts are enabled
before we enable thermal interrupts.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:55:26 -05:00
Alex Deucher
a4643ba340 drm/radeon/dpm: add late_enable for rs780/rs880/rv6xx
Make sure interrupts are enabled before we enable
thermal interrupts.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:55:12 -05:00
Alex Deucher
914a89872b drm/radeon/dpm: add a late enable callback
Certain features need to be enabled after ring tests
(e.g., powergating, etc.).  Add a function pointer
to split out late enable features.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:54:56 -05:00
Alex Deucher
01ac8794a7 drm/radeon: re-order firmware loading in preparation for dpm rework
We need to reorder the driver init sequence to better accomodate
dpm which needs to be loaded earlier in the init sequence.  Move
fw init up so that it's available for dpm init.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:54:40 -05:00
Alex Deucher
f2185ecef1 drm/radeon/cik: drop cg_update from dpm code
I'm not entirely sure this is required and it won't work
with the dpm restructing anyway.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:54:25 -05:00
Alex Deucher
68e3a092c1 drm/radeon/si: drop cg_update from dpm code
I'm not entirely sure this is required and it won't work
with the dpm restructing anyway.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:54:11 -05:00
Alex Deucher
bb5abf9f64 drm/radeon/dpm: remove unnecessary checks in dpm_init
No need to check rdev->pm.num_power_states; this is a vestige
of the old pm code.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 17:53:57 -05:00
Christian König
dd66d20e39 drm/radeon: add GART debugfs access v3
v2: add default_llseek
v3: set inode size in the open callback

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 16:12:53 -05:00
Christian König
2014b56941 drm/radeon: add VRAM debugfs access v3
Not very fast, but makes it possible to access even the
normally inaccessible parts of VRAM from userspace.

v2: use MM_INDEX_HI for >2GB mem access, add default_llseek
v3: set inode size in the open callback

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 16:12:47 -05:00
Christian König
893d6e6e12 drm/radeon: cleanup radeon_ttm debugfs handling
Otherwise we not necessary export the right information.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 16:12:41 -05:00
Christian König
e290b63475 drm/radeon: update fence values in before reporting them
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 16:12:35 -05:00
Christian König
931dc3a456 drm/radeon: report the real offset in radeon_sa_bo_dump_debug_info
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 16:12:29 -05:00
Christian König
df893a2548 drm/radeon: improve ring debugfs a bit
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24 16:12:23 -05:00
Alex Deucher
9482d0d37b drm/radeon: Bump version for CIK DCE tiling fix
Note when CIK DCE tiling was fixed.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23 11:31:44 -05:00
Marek Olšák
e3ea94a60f drm/radeon: set correct number of banks for CIK chips in DCE
We don't have the NUM_BANKS parameter, so we have to calculate it
from the other parameters. NUM_BANKS is not constant on CIK.

This fixes 2D tiling for the display engine on CIK.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23 11:30:23 -05:00
Marek Olšák
35a905282b drm/radeon: set correct pipe config for Hawaii in DCE
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23 11:27:01 -05:00
Marek Olšák
439a1cfffe drm/radeon: expose render backend mask to the userspace
This will allow userspace to correctly program the PA_SC_RASTER_CONFIG
register, so it can be considered a fix.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-23 10:03:43 -05:00
Marek Olšák
9fadb352ed drm/radeon: fix render backend setup for SI and CIK
Only the render backends of the first shader engine were enabled. The others
were erroneously disabled. Enabling the other render backends improves
performance a lot.

Unigine Sanctuary on Bonaire:
  Before: 15 fps
  After:  90 fps

Judging from the fan noise, the GPU was also underclocked when the other
render backends were disabled, resulting in horrible performance. The fan is
a lot noisy under load now.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-23 10:03:42 -05:00
Christian König
bae651dbd7 drm/radeon: fix UVD 256MB check
Otherwise the kernel might reject our decoding requests.

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23 10:03:41 -05:00
Alex Deucher
e2f6c88fb9 drm/radeon: fix asic gfx values for scrapper asics
Fixes gfx corruption on certain TN/RL parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=60389

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-19 19:41:46 -05:00
Daniel Vetter
85b2331b34 drm: Kill DRM_*MEMORYBARRIER
The real linux interfaces are soooo much easier on the eyes ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:35:21 +10:00
Daniel Vetter
1d6ac185c3 drm: Kill DRM_COPY_(TO|FROM)_USER
Less yelling ftw!

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:35:01 +10:00
Daniel Vetter
57ed0f7b43 drm: Kill DRM_WAKUP and DRM_INIT_WAITQUEUE
Less yelling ftw!

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:34:13 +10:00
Daniel Vetter
e9f0d76f3b drm: Kill DRM_IRQ_ARGS
I've killed them a long time ago in drm/i915, let's get rid of this
remnant of shared drm core days for good.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:33:46 +10:00
Daniel Vetter
bfd8303af0 drm: Kill DRM_HZ
We don't have any userspace interfaces that use HZ as a time unit, so
having our own DRM define is useless.

Remove this remnant from the shared drm core days.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:33:24 +10:00
Daniel Vetter
d9906753bb drm: rip out drm_core_has_AGP
Most place actually want to just check for dev->agp (most do, but a
few don't so this fixes a few potential NULL derefs). The only
exception is the agp init code which should check for the AGP driver
feature flag.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:20:04 +10:00
Thierry Reding
6b27f7f0e9 drm/dp: Use AUX constants from specification
The current values seem to be defined in a format that's specific to the
i915, gma500 and radeon drivers. To make this more generally useful, use
the values as defined in the specification.

While at it, prefix the constants with DP_ for improved namespacing.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:08:51 +10:00
Alex Deucher
b67ce39a30 drm/radeon: check for 0 count in speaker allocation and SAD code
If there is no speaker allocation block or SAD block, bail
early.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72283

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-17 09:23:16 -05:00
Alex Deucher
c745fe611c drm/radeon/dpm: disable ss on Cayman
Spread spectrum seems to cause hangs when dynamic clock
switching is enabled.  Disable it for now. This does not
affect performance or the amount of power saved. Tracked
down by Martin Andersson.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69723

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-17 09:23:15 -05:00
Alex Deucher
533518a43a drm/radeon/dce6: set correct number of audio pins
DCE6.0, 8.x has 6
DCE6.1 has 4

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-17 09:23:14 -05:00
Sergey Senozhatsky
e4158f1b10 radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh()
Since commit ec39f64bba ("drm/radeon/dpm: Convert to use
devm_hwmon_register_with_groups") radeon_hwmon_init() is using
hwmon_device_register_with_groups(), which sets `rdev' as a device
private driver_data, while hwmon_attributes_visible() and
radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.

Fix them by using dev_get_drvdata(), in order to avoid this oops:

  BUG: unable to handle kernel paging request at 0000000000001e28
  IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon]
  PGD 15057e067 PUD 151a8e067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP
  Call Trace:
    internal_create_group+0x114/0x1d9
    sysfs_create_group+0xe/0x10
    sysfs_create_groups+0x22/0x5f
    device_add+0x34f/0x501
    device_register+0x15/0x18
    hwmon_device_register_with_groups+0xb5/0xed
    radeon_hwmon_init+0x56/0x7c [radeon]
    radeon_pm_init+0x134/0x7e5 [radeon]
    radeon_modeset_init+0x75f/0x8ed [radeon]
    radeon_driver_load_kms+0xc6/0x187 [radeon]
    drm_dev_register+0xf9/0x1b4 [drm]
    drm_get_pci_dev+0x98/0x129 [drm]
    radeon_pci_probe+0xa3/0xac [radeon]
    pci_device_probe+0x6e/0xcf
    driver_probe_device+0x98/0x1c4
    __driver_attach+0x5c/0x7e
    bus_for_each_dev+0x7b/0x85
    driver_attach+0x19/0x1b
    bus_add_driver+0x104/0x1ce
    driver_register+0x89/0xc5
    __pci_register_driver+0x58/0x5b
    drm_pci_init+0x86/0xea [drm]
    radeon_init+0x97/0x1000 [radeon]
    do_one_initcall+0x7f/0x117
    load_module+0x1583/0x1bb4
    SyS_init_module+0xa0/0xaf

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-15 12:16:00 -08:00
Alex Deucher
59aebe2b32 Revert "drm/radeon: Implement radeon_pci_shutdown"
This causes a race condition between drm_dev_unregister()
and pci_driver.shutdown at shutdown or driver unload time.

We need to revisit how to properly support kexec within
the drm.

This reverts commit 846ae41ae9.
2013-12-12 12:22:06 -05:00
Alex Deucher
227ae10f17 drm/radeon: add missing display tiling setup for oland
Fixes improperly set up display params for 2D tiling on
oland.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-12 12:22:05 -05:00
Christian König
1b3abef830 drm/radeon: fix typo in cik_copy_dma
Otherwise we end up with a rather strange looking result.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-12 12:22:05 -05:00
Alex Deucher
7819678fae drm/radeon/cik: plug in missing blit callback
I implemented support for this, but forget to hook
up the callback so the driver can actually use it.
On asics with a dedicated DMA engine, we use the DMA
engine for buffer migration so this is just for testing
purposes.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-12 12:22:04 -05:00
Martin Andersson
1522f9c79c drm/radeon/dpm: Fix hwmon crash
Commit ec39f64bba (drm/radeon/dpm: Convert
to use devm_hwmon_register_with_groups) converted one usage of
dev_get_drvdata, but there were two more.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72457

Signed-off-by: Martin Andersson <g02maran@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-12 12:21:36 -05:00
Alex Deucher
8333f0fe13 drm/radeon: Fix sideport problems on certain RS690 boards
Some RS690 boards with 64MB of sideport memory show up as
having 128MB sideport + 256MB of UMA.  In this case,
just skip the sideport memory and use UMA.  This fixes
rendering corruption and should improve performance.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=35457

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-12 08:34:40 -05:00
Lv Zheng
8b48463f89 ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07 01:03:14 +01:00
Alex Deucher
ffd3d3361d drm/radeon/atom: fix bus probes when hw_i2c is set (v2)
When probing the bus, we need to set the byte count
to 0 rather than 1.

v2: Don't count the first byte.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=66241

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-04 19:56:46 -05:00
Alex Deucher
53dc0b0c94 drm/radeon: fix null pointer dereference in dce6+ audio code
Don't crash if the encoder does not have an afmt struct.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72283

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-04 19:56:45 -05:00
Alex Deucher
0ca223b029 drm/radeon: fixup bad vram size on SI
Some boards seem to have garbage in the upper
16 bits of the vram size register.  Check for
this and clamp the size properly.  Fixes
boards reporting bogus amounts of vram.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-04 19:56:44 -05:00
Dave Airlie
b7bc799903 drm/radeon: fix VGT_GS_INSTANCE_CNT register
This register was incorrect for evergreen and cayman.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-02 17:50:56 -05:00
Alexandre Demers
1abd4986f4 drm/radeon: Fix a typo in Cayman and Evergreen registers
According to documentation, 0x00008A60 should be PA_SU_LINE_STIPPLE_VALUE.

Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-02 17:50:56 -05:00
Alex Deucher
d444af2dec drm/radeon/dpm: simplify state adjust logic for NI
This is based on a similar patch from Alexandre Demers.
While fixing up some warnings with that patch I saw some
additional cleanups that could be applied.  This patch
simplifies the logic for patching the power state.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
2013-12-02 17:50:46 -05:00
Christian König
9c57a6bd3e drm/radeon: add radeon_vm_bo_update trace point
Also rename the function to better reflect what it is doing.

agd5f: fix argument size warning

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-02 16:40:44 -05:00
Christian König
84d597b74b drm/radeon: add VMID allocation trace point
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-02 16:40:43 -05:00
Guenter Roeck
ec39f64bba drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups
Simplify the code and fix race condition seen because
attribute files were created after hwmon device registration.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-02 16:40:42 -05:00
Alex Deucher
55d4e020fb drm/radeon: program DCE2 audio dto just like DCE3
Seems to work like the DCE3 version despite what
the register spec says.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=71975

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-02 16:40:42 -05:00
Alex Deucher
180f805f4f drm/radeon: fix typo in fetching mpll params
Copy-paste typo.  Value should be 0-2, not 0-1.

Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-02 16:40:41 -05:00
Dave Airlie
ded5107e2a Merge branch 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
More fixes for radeon.  This adds new queries for tiling on CIK, and
fixes a crash in handling acpi atif backlight events on CIK.
Some fixes for radeon for 3.13.  Mostly CI stability fixes.  I think
I've tracked down the stability problems with dpm on Trinity/Richland,
so I'm going to enable that by default now.

* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: hook up backlight functions for CI and KV family.
  drm/radeon/cik: Add macrotile mode array query
  drm/radeon/cik: Return backend map information to userspace
  drm/radeon: enable DPM by default in TN asics
  drm/radeon: adjust TN dpm parameters for stability (v2)
  drm/radeon: use a single doorbell for cik kms compute
  drm/radeon/vm: don't attempt to update ptes if ib allocation fails
  drm/radeon: disable CIK CP semaphores for now
  drm/radeon: allow semaphore emission to fail
  drm/radeon: add semaphore trace point
  radeon: workaround pinning failure on low ram gpu
  radeon/i2c: do not count reg index in number of i2c byte we are writing.
  drm/radeon: cypress_dpm: Fix unused variable warning when CONFIG_ACPI=n
  drm: radeon: ni_dpm: Fix unused variable warning when CONFIG_ACPI=n
2013-11-21 18:42:19 +10:00
Linus Torvalds
82023bb7f7 More ACPI and power management updates for 3.13-rc1
- ACPI-based device hotplug fixes for issues introduced recently and
   a fix for an older error code path bug in the ACPI PCI host bridge
   driver.
 
 - Fix for recently broken OMAP cpufreq build from Viresh Kumar.
 
 - Fix for a recent hibernation regression related to s2disk.
 
 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar.
 
 - System suspend error code path fix related to runtime PM and
   runtime PM documentation update from Ulf Hansson.
 
 - cpufreq's conservative governor fix from Xiaoguang Chen.
 
 - New processor IDs for intel_idle and turbostat and removal of
   an obsolete Kconfig option from Len Brown.
 
 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
 
 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu.
 
 - Rework of the ACPI companion representation in struct device and
   code cleanup related to that change from Rafael J Wysocki,
   Lan Tianyu and Jarkko Nikula.
 
 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices
   from Jarkko Nikula.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSjLYNAAoJEILEb/54YlRxkEQP/1pmFWNwSsxLtTHd+PEs0Xbo
 QccqvjQrnw/c8GcmK4eZrz6/xyuepmmjy9kfRKj2ENZniy0NEsSFqkTdSO3vYlva
 8HKWUj7MV3evhFERXAF6Tu0b4Enx4jOP7VMtmYxJo3qrSnKRUcUzc6DGv/ACsUT1
 Nkj0Lhdsg053Z+YzIXrl50w0tCDEMhVmWlMHBtYgr+dMNVnkfPBGkqMblMkKCXT2
 w/yHvauZlxQHtI+8bVqTuGgNN0CPzdlpFGiuUF+5mDf6dRX8zlSn56Ia+Wyw1k9X
 dQp4jYQOgPRo03rNKqQPDiPxUdc7T0RAHRvDB51Ncweuh5PfZGguQe71p6/LKY2W
 i6zblZ0f/vc13hTiMrP+qzKcwZvgPB5DH7SfnHr61JKV7GNFCdYAqoceS5hYMzR9
 d2Fd+txgm763IHWewXfDS/G2cU492R5qr4jpmUIACBQKWDZcqmSRDwRj83t56Ltb
 jgFBMbg4vZxG7IARhind74xsALxdhsgmFjPmx+0qPWjYxcU8otQZpXbgGNI9iOuW
 pxIQv5WPQW0tTmwO4HSuVCOwDPLPz5R0jkev7SvSj3Ek3TeD7He4LmnK055CATiC
 puq+6dp1FISPOPJYk+0DI61qN/CB/qNwRp8LU3ctZwudPVhznIE9FFQ3iN1FdBg2
 X8VDcT9t7VvVuxSBjgkj
 =QMp+
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:

 - ACPI-based device hotplug fixes for issues introduced recently and a
   fix for an older error code path bug in the ACPI PCI host bridge
   driver

 - Fix for recently broken OMAP cpufreq build from Viresh Kumar

 - Fix for a recent hibernation regression related to s2disk

 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar

 - System suspend error code path fix related to runtime PM and runtime
   PM documentation update from Ulf Hansson

 - cpufreq's conservative governor fix from Xiaoguang Chen

 - New processor IDs for intel_idle and turbostat and removal of an
   obsolete Kconfig option from Len Brown

 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg

 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu

 - Rework of the ACPI companion representation in struct device and code
   cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
   Jarkko Nikula

 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
   Jarkko Nikula

* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
  ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
  ACPI / PCI root: Clear driver_data before failing enumeration
  ACPI / hotplug: Fix PCI host bridge hot removal
  ACPI / hotplug: Fix acpi_bus_get_device() return value check
  cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
  ACPI / video: clean up DMI table for initial black screen problem
  ACPI / EC: Ensure lock is acquired before accessing ec struct members
  PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
  ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
  spi: Use stable dev_name for ACPI enumerated SPI slaves
  i2c: Use stable dev_name for ACPI enumerated I2C slaves
  ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
  ACPI / bind: Use (put|get)_device() on ACPI device objects too
  ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
  ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
  cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
  PM / Runtime: Fix error path for prepare
  PM / Runtime: Update documentation around probe|remove|suspend
  cpufreq: conservative: set requested_freq to policy max when it is over policy max
  ...
2013-11-20 13:25:04 -08:00
Samuel Li
7272c9d228 drm/radeon: hook up backlight functions for CI and KV family.
Fixes crashes when handling atif events due to the lack of a
callback being registered.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-19 15:57:29 -05:00
Michel Dänzer
32f79a8a82 drm/radeon/cik: Add macrotile mode array query
This is required to properly calculate the tiling parameters
in userspace.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-18 09:19:36 -05:00
Michel Dänzer
1ddce27d8f drm/radeon/cik: Return backend map information to userspace
This is required to properly calculate the tiling parameters
in userspace.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-18 09:18:58 -05:00
Alex Deucher
3a118989d5 drm/radeon: enable DPM by default in TN asics
After adjusting the dpm parameters this seems to be
stable on most TN systems.  DPM is important for APUs
since the boot clocks are generally pretty low.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-15 15:57:38 -05:00
Alex Deucher
958b84fb3b drm/radeon: adjust TN dpm parameters for stability (v2)
Adjust some of the TN dpm settings for stability.  Enabling
these features causes hangs and other stability problems
on certain boards.

v2: leave uvd dpm enabled

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63101

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:57:30 -05:00
Andrew Lewycky
d5754ab8f9 drm/radeon: use a single doorbell for cik kms compute
A single doorbell page is plenty for cik kms compute.
Use a single page and manage doorbell allocation by
individual doorbells rather than pages.  Identify
doorbells by their index rather than byte offset.

Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-15 15:56:22 -05:00
Alex Deucher
4cc948b94a drm/radeon/vm: don't attempt to update ptes if ib allocation fails
If we fail to allocate an indirect buffer (ib) when updating
the ptes, return an error instead of trying to use the ib.
Avoids a null pointer dereference.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=58621

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:56:22 -05:00
Christian König
99b4f25122 drm/radeon: disable CIK CP semaphores for now
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:56:16 -05:00
Christian König
1654b817d8 drm/radeon: allow semaphore emission to fail
To workaround bugs and/or certain limits it's sometimes
useful to fall back to waiting on fences.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:56:09 -05:00
Christian König
bd80c8ba99 drm/radeon: add semaphore trace point
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:56:02 -05:00
Jerome Glisse
97b6ff6be9 radeon: workaround pinning failure on low ram gpu
GPU with low amount of ram can fails at pinning new framebuffer before
unpinning old one. On such failure, retry with unpinning old one before
pinning new one allowing to work around the issue. This is somewhat
ugly but only affect those old GPU we care about.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:29:33 -05:00
Jerome Glisse
fae009d15a radeon/i2c: do not count reg index in number of i2c byte we are writing.
Useless to count the register index in number of bytes we are writing.

Fixes a regression with hw i2c enabled.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-15 15:29:32 -05:00
Alex Deucher
936b32643c drm/radeon: cypress_dpm: Fix unused variable warning when CONFIG_ACPI=n
With CONFIG_ACPI=n the following build warning is seen:

drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable]

Protect eg_pi with CONFIG_ACPI.

Based on patch from: Fabio Estevam <fabio.estevam@freescale.com>
but doesn't mix allocation and code.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-15 15:29:31 -05:00
Fabio Estevam
71473dbd66 drm: radeon: ni_dpm: Fix unused variable warning when CONFIG_ACPI=n
With CONFIG_ACPI=n the following build warning is seen:

drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable]

Move the definition of eg_pi inside the CONFIG_ACPI 'if' block.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-15 15:29:31 -05:00
Linus Torvalds
049ffa8ab3 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is a combo of -next and some -fixes that came in in the
  intervening time.

  Highlights:

  New drivers:
    ARM Armada driver for Marvell Armada 510 SOCs

  Intel:
    Broadwell initial support under a default off switch,
    Stereo/3D HDMI mode support
    Valleyview improvements
    Displayport improvements
    Haswell fixes
    initial mipi dsi panel support
    CRC support for debugging
    build with CONFIG_FB=n

  Radeon:
    enable DPM on a number of GPUs by default
    secondary GPU powerdown support
    enable HDMI audio by default
    Hawaii support

  Nouveau:
    dynamic pm code infrastructure reworked, does nothing major yet
    GK208 modesetting support
    MSI fixes, on by default again
    PMPEG improvements
    pageflipping fixes

  GMA500:
    minnowboard SDVO support

  VMware:
    misc fixes

  MSM:
    prime, plane and rendernodes support

  Tegra:
    rearchitected to put the drm driver into the drm subsystem.
    HDMI and gr2d support for tegra 114 SoC

  QXL:
    oops fix, and multi-head fixes

  DRM core:
    sysfs lifetime fixes
    client capability ioctl
    further cleanups to device midlayer
    more vblank timestamp fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (789 commits)
  drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add
  drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800
  drm/nouveau/pwr: fix missing mutex unlock in a failure path
  drm/nv40/therm: fix slowing down fan when pstate undefined
  drm/nv11-: synchronise flips to vblank, unless async flip requested
  drm/nvc0-: remove nasty fifo swmthd hack for flip completion method
  drm/nv10-: we no longer need to create nvsw object on user channels
  drm/nouveau: always queue flips relative to kernel channel activity
  drm/nouveau: there is no need to reserve/fence the new fb when flipping
  drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence
  drm/nouveau: allow nouveau_fence_ref() to be a noop
  drm/nvc8/mc: msi rearm is via the nvc0 method
  drm/ttm: Fix vma page_prot bit manipulation
  drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
  drm/vmwgfx: Resource evict fixes
  drm/edid: compare actual vrefresh for all modes for quirks
  drm: shmob_drm: Convert to clk_prepare/unprepare
  drm/nouveau: fix 32-bit build
  drm/i915/opregion: fix build error on CONFIG_ACPI=n
  Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
  ...
2013-11-15 14:19:54 +09:00
Rafael J. Wysocki
3a83f99249 ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
Since DEVICE_ACPI_HANDLE() is now literally identical to
ACPI_HANDLE(), replace it with the latter everywhere and drop its
definition from include/acpi.h.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-14 23:17:21 +01:00
Rafael J. Wysocki
7b1998116b ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
Modify struct acpi_dev_node to contain a pointer to struct acpi_device
associated with the given device object (that is, its ACPI companion
device) instead of an ACPI handle corresponding to it.  Introduce two
new macros for manipulating that pointer in a CONFIG_ACPI-safe way,
ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the
ACPI_HANDLE() macro to take the above changes into account.
Drop the ACPI_HANDLE_SET() macro entirely and rework its users to
use ACPI_COMPANION_SET() instead.  For some of them who used to
pass the result of acpi_get_child() directly to ACPI_HANDLE_SET()
introduce a helper routine acpi_preset_companion() doing an
equivalent thing.

The main motivation for doing this is that there are things
represented by struct acpi_device objects that don't have valid
ACPI handles (so called fixed ACPI hardware features, such as
power and sleep buttons) and we would like to create platform
device objects for them and "glue" them to their ACPI companions
in the usual way (which currently is impossible due to the
lack of valid ACPI handles).  However, there are more reasons
why it may be useful.

First, struct acpi_device pointers allow of much better type checking
than void pointers which are ACPI handles, so it should be more
difficult to write buggy code using modified struct acpi_dev_node
and the new macros.  Second, the change should help to reduce (over
time) the number of places in which the result of ACPI_HANDLE() is
passed to acpi_bus_get_device() in order to obtain a pointer to the
struct acpi_device associated with the given "physical" device,
because now that pointer is returned by ACPI_COMPANION() directly.
Finally, the change should make it easier to write generic code that
will build both for CONFIG_ACPI set and unset without adding explicit
compiler directives to it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-11-14 23:14:43 +01:00
Linus Torvalds
2f466d33f5 PCI changes for the v3.13 merge window:
Resource management
     - Fix host bridge window coalescing (Alexey Neyman)
     - Pass type, width, and prefetchability for window alignment (Wei Yang)
 
   PCI device hotplug
     - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)
 
   Power management
     - Remove pci_pm_complete() (Liu Chuansheng)
 
   MSI
     - Fail initialization if device is not in PCI_D0 (Yijing Wang)
 
   MPS (Max Payload Size)
     - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
     - Use pcie_set_readrq() to simplify code (Yijing Wang)
     - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)
 
   SR-IOV
     - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
     - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)
 
   Virtualization
     - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)
 
   Freescale i.MX6
     - Support i.MX6 PCIe controller (Sean Cross)
     - Increase link startup timeout (Marek Vasut)
     - Probe PCIe in fs_initcall() (Marek Vasut)
     - Fix imprecise abort handler (Tim Harvey)
     - Remove redundant of_match_ptr (Sachin Kamat)
 
   Renesas R-Car
     - Support Gen2 internal PCIe controller (Valentine Barshak)
 
   Samsung Exynos
     - Add MSI support (Jingoo Han)
     - Turn off power when link fails (Jingoo Han)
     - Add Jingoo Han as maintainer (Jingoo Han)
     - Add clk_disable_unprepare() on error path (Wei Yongjun)
     - Remove redundant of_match_ptr (Sachin Kamat)
 
   Synopsys DesignWare
     - Add irq_create_mapping() (Pratyush Anand)
     - Add header guards (Seungwon Jeon)
 
   Miscellaneous
     - Enable native PCIe services by default on non-ACPI (Andrew Murray)
     - Cleanup _OSC usage and messages (Bjorn Helgaas)
     - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
     - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
     - Remove unused pci_mem_start (Myron Stowe)
     - Make sysfs functions static (Sachin Kamat)
     - Warn on invalid return from driver probe (Stephen M. Cameron)
     - Remove Intel Haswell D3 delays (Todd E Brandt)
     - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
     - Use pci_is_pcie() to simplify code (Yijing Wang)
     - Use PCIe capability accessors to simplify code (Yijing Wang)
     - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
     - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
     - Simplify sysfs CPU affinity implementation (Yijing Wang))
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgUzsAAoJEFmIoMA60/r8wmsQAJhwmtkUYR2L4T1g9smAyjJz
 bLm5zoC6WdywFcbTpTBfsTrS1CHIQG5akRgkEXGdr99epiho5F2lwmagWsUR4ijL
 39Qn3knAUMgtNjoVXXI106h/DfTyxSmkZBfih2AQFyWobJq+0kg7hjQQA3+836b4
 8ssWr1+NSl6JJTqYQ0Paw1kSqvvYoXsu5rWFEfCHk8D0s/1bvr5ldAUpk2jTg93I
 uo9/5+O264yt1YoKZOMqAMZLUfd5DaWY1mV3yeF0Uauy1pBmol5csE8ckqJPDrES
 PRdJT1+PhBeLYWcgXANOBZsW58ddxA0pQ5jQV6VJHQWsm5cE82OBpYJf6xUZ2moV
 o6DZ0KRnCPVA3NllYYR16H+wbMfADwwO83QoA+QTIZJy/WgpDH3Cst+m8KePGqbL
 uFgDdXSws9Bs1BCFs7bfYzAM3OdkBFnn+ac7JoPXKP5ibgAp9nDlurgK2r90zRnp
 j15vHMx0mV+e8B8/iwiW5eRtg7NoCHYiNfFy7JalOlsPmYr2KFazBVKclp13Hng7
 fe/Jy6X4UhWoQPdqsy4ftvSQb0gm1MClxFJeZ3VAt6LY9j8OP6S/Vdf6lpAL85KR
 lAQoQzB+lOhTPdXxFY2xgGkITkqPDOQMjPfowYUYFwybqBuG6BHXZPJobL+niBlb
 Nh+M2WlUUA9Z3V6rWJB6
 =CTPk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Resource management
    - Fix host bridge window coalescing (Alexey Neyman)
    - Pass type, width, and prefetchability for window alignment (Wei Yang)

  PCI device hotplug
    - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)

  Power management
    - Remove pci_pm_complete() (Liu Chuansheng)

  MSI
    - Fail initialization if device is not in PCI_D0 (Yijing Wang)

  MPS (Max Payload Size)
    - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
    - Use pcie_set_readrq() to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)

  SR-IOV
    - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
    - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)

  Virtualization
    - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)

  Freescale i.MX6
    - Support i.MX6 PCIe controller (Sean Cross)
    - Increase link startup timeout (Marek Vasut)
    - Probe PCIe in fs_initcall() (Marek Vasut)
    - Fix imprecise abort handler (Tim Harvey)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Renesas R-Car
    - Support Gen2 internal PCIe controller (Valentine Barshak)

  Samsung Exynos
    - Add MSI support (Jingoo Han)
    - Turn off power when link fails (Jingoo Han)
    - Add Jingoo Han as maintainer (Jingoo Han)
    - Add clk_disable_unprepare() on error path (Wei Yongjun)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Synopsys DesignWare
    - Add irq_create_mapping() (Pratyush Anand)
    - Add header guards (Seungwon Jeon)

  Miscellaneous
    - Enable native PCIe services by default on non-ACPI (Andrew Murray)
    - Cleanup _OSC usage and messages (Bjorn Helgaas)
    - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
    - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
    - Remove unused pci_mem_start (Myron Stowe)
    - Make sysfs functions static (Sachin Kamat)
    - Warn on invalid return from driver probe (Stephen M. Cameron)
    - Remove Intel Haswell D3 delays (Todd E Brandt)
    - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
    - Use pci_is_pcie() to simplify code (Yijing Wang)
    - Use PCIe capability accessors to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
    - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
    - Simplify sysfs CPU affinity implementation (Yijing Wang)"

* tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits)
  PCI: Enable upstream bridges even for VFs on virtual buses
  PCI: Add pci_upstream_bridge()
  PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()
  PCI: Warn on driver probe return value greater than zero
  PCI: Drop warning about drivers that don't use pci_set_master()
  PCI: Workaround missing pci_set_master in pci drivers
  powerpc/pci: Use pci_is_pcie() to simplify code [fix]
  PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms
  PCI: imx6: Probe the PCIe in fs_initcall()
  PCI: Add R-Car Gen2 internal PCI support
  PCI: imx6: Remove redundant of_match_ptr
  PCI: Report pci_pme_active() kmalloc failure
  mn10300/PCI: Remove useless pcibios_last_bus
  frv/PCI: Remove pcibios_last_bus
  PCI: imx6: Increase link startup timeout
  PCI: exynos: Remove redundant of_match_ptr
  PCI: imx6: Fix imprecise abort handler
  PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0
  PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe()
  x86/PCI: Coalesce multiple overlapping host bridge windows
  ...
2013-11-14 14:02:00 +09:00
Alex Deucher
28ed756f1f Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
This reverts commit 555b1b651a.

Let's try this again for 3.13.  It's required for proper
interaction with alsa.  Was disabled previously in 3.12
to be on the safe side since it caused problems on older
asics.
2013-11-08 13:07:51 -05:00
Pierre Ossman
a2098250fb drm/radeon/audio: improve ACR calculation
In order to have any realistic chance of calculating proper
ACR values, we need to be able to calculate both N and CTS,
not just CTS. We still aim for the ideal N as specified in
the HDMI spec though.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675

Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 13:06:33 -05:00
Pierre Ossman
3e71985f24 drm/radeon/audio: correct ACR table
The values were taken from the HDMI spec, but they assumed
exact x/1.001 clocks. Since we round the clocks, we also need
to calculate different N and CTS values.

Note that the N for 25.2/1.001 MHz at 44.1 kHz audio is out of
spec. Hopefully this mode is rarely used and/or HDMI sinks
tolerate overly large values of N.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675

Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 13:05:27 -05:00
Alex Deucher
e31fadd372 drm/radeon: fix mismerge of drm-next with 3.12
Audio is enabled by default now.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 13:03:47 -05:00
Alex Deucher
41971b37d1 drm/radeon: fill in radeon_asic_init for hawaii
Fill in gpu details for hawaii.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:47 -05:00
Alex Deucher
7eeeabfcce drm/radeon: modesetting updates for hawaii
Uses the same code as bonaire.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:46 -05:00
Alex Deucher
60669d56f5 drm/radeon: atombios.h updates for hawaii
This updates atombios.h with the latest changes
required for hawaii.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:45 -05:00
Alex Deucher
bbfe90bd4e drm/radeon: update cik_get_csb_buffer for hawaii
Set the PA_SC_RASTER_CONFIG[_1] registers for hawaii.
The rest is the same as the other asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:45 -05:00
Alex Deucher
2d40038d3f drm/radeon: add hawaii dpm support
This updates the CI dpm (dynamic power management)
support for hawaii.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:44 -05:00
Alex Deucher
4256331ae9 drm/radeon/cik: add hawaii UVD support
Has same version of UVD as other CIK parts.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:43 -05:00
Alex Deucher
d47756556d drm/radeon: update firmware loading for hawaii
This just updates the firmware loading functions
to look for the appropriate firmware files for
hawaii.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:43 -05:00
Alex Deucher
fc821b70b0 drm/radeon: update rb setup for hawaii
The formula needs to be adjusted since there are 4 RBs
per SH rather than 2 as on previous asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:42 -05:00
Alex Deucher
8efff33742 drm/radeon: add golden register settings for hawaii
The golden register settings are optimal settings for
certain registers from the hardware team.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:41 -05:00
Alex Deucher
21e438af64 drm/radeon: update cik_tiling_mode_table_init() for hawaii
Hawaii uses a different tiling configuration.  Add support
for it.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:41 -05:00
Alex Deucher
939c0d3c08 drm/radeon: minor updates to cik.c for hawaii
Skip programming a register that was removed and
adjust the mask of the VM client status.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:40 -05:00
Alex Deucher
b496038bd4 drm/radeon: update cik_gpu_init() for hawaii
This adds the hawaii asic specific configuration
details.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:39 -05:00
Alex Deucher
3bf599e8a2 drm/radeon: add Hawaii chip family
Hawaii is a new CI-based dGPU.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:39 -05:00
Alex Deucher
1cd73ff70d drm/radeon: fix-up some float to fixed conversion thinkos
Spotted by Brad Smith when porting to OpenBSD.

Noticed-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:38 -05:00
Alex Deucher
d45fd24dd3 drm/radeon: use HDP_MEM_COHERENCY_FLUSH_CNTL for sdma as well
The new HDP flush method doesn't seem to work reliably on
sDMA either, so use the old method here too.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:37 -05:00
Ilija Hadzic
520a8718fe drm/radeon/kms: add crtc_disable function for legacy crtc
To plug the VRAM memory leak (see previous patch for
details) we must unpin the frame buffer when disabling the
CRTC. This warrants the addition of disable function for legacy
CRTC, which puts the CRTC in DPMS-OFF state and unpins the
frame buffer if there is one associated with the CRTC.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:37 -05:00
Ilija Hadzic
75b871e2d8 drm/radeon/kms: unpin fb in atombios crtc disable
When drm_helper_disable_unused_functions calls disable
function of the CRTC, it also sets the crtc->fb pointer
to NULL. This can later (when the mode on that CRTC is setup
again from user space) cause ***_do_set_base functions to
"think" that there is no old buffer and skip the unpinning
code. Consequently, the buffer that has been NULL-ified in
drm_helper_disable_unused_functions will never be unpinned
causing a leak in VRAM.

This patch plugs the leak by unpinning the frame buffer
in crtc_disable function.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:36 -05:00
Anssi Hannula
0f57bca922 drm/radeon/audio: fix missing multichannel PCM SAD in some cases
The current code writing SADs to the audio registers seems to assume
that there is at most a single SAD per audio format.

However, that is not the case. Especially for PCM it is somewhat common
for sinks to have two SADs, one for 8-channel and one for 2-channel
audio, which may have different supported sample rates (i.e. the sink
supports stereo audio at higher sample rates than multichannel audio).

Because of this, only the 2-channel SAD may be used if it appears before
the 8-channel SAD. Unless other SADs require otherwise, this may cause
the ALSA HDA driver to allow stereo playback only.

Fix the code to pick the PCM SAD with the highest number of channels,
while merging the rate masks of PCM SADs with lower amount of channels
into the additional stereo rate mask byte.

Technically there are even more cases to handle (multiple non-PCM SADs
of the same type, more than two PCM SADs with varying channel counts,
etc), but those have not actually been encountered in the field and
handling them would be non-trivial.

Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo
support and 96kHz 8-channel support (and other 8-channel compressed
formats):
00ffffffffffff003dcb010000000001
ffff0103800000780a0dc9a057479827
12484c00000001010101010101010101
010101010101011d8018711c1620582c
2500c48e2100009e011d007251d01e20
6e285500c48e2100001e000000fc0054
582d53523637342020202020000000fd
00313d0f2e08000a202020202020019b
02032f724f8504030f0e07069413121e
1d1615012f097f070f1f071707503707
503f07c0834f000066030c00ffff808c
0ad08a20e02d10103e9600c48e210000
18011d80d0721c1620102c2580c48e21
00009e011d00bc52d01e20b8285540c4
8e2100001e8c0ad090204031200c4055
00c48e210000180000000000000000a8

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Andre Heider <a.heider@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08 12:33:35 -05:00
Dave Airlie
91915260ea Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-08 16:34:39 +10:00
Christian König
721529b578 drm/radeon: fix radeon_fence_wait_empty_locked
Don't block forever if there is nothing to wait for.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Rafa? Mi?ecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 13:40:59 +10:00
Ville Syrjälä
10e10d34ee drm/radeon: Return -ENOENT when a mode object can't be found
Let's be a bit more consistent with our error values.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 13:25:20 +10:00
Mario Kleiner
d47abc585d drm/radeon: Push get_scanout_position() timestamping into kms driver.
Move the ktime_get() clock readouts and potential preempt_disable()
calls from drm core into kms driver to make it compatible with the
api changes in the drm core.

This should not introduce any change in functionality or behaviour
in radeon-kms, just a reshuffling of code.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 11:53:42 +10:00
Daniel Vetter
7f16e5c141 Merge tag 'v3.12' into drm-intel-next
I want to merge in the new Broadwell support as a late hw enabling
pull request. But since the internal branch was based upon our
drm-intel-nightly integration branch I need to resolve all the
oustanding conflicts in drm/i915 with a backmerge to make the 60+
patches apply properly.

We'll propably have some fun because Linus will come up with a
slightly different merge solution.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_drv.c
	drivers/gpu/drm/i915/intel_crt.c
	drivers/gpu/drm/i915/intel_ddi.c
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_dp.c
	drivers/gpu/drm/i915/intel_drv.h

All rather simple adjacent lines changed or partial backports from
-next to -fixes, with the exception of the thaw code in i915_dma.c.
That one needed a bit of shuffling to restore the intent.

Oh and the massive header file reordering in intel_drv.h is a bit
trouble. But not much.

v2: Also don't forget the fixup for the silent conflict that results
in compile fail ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-04 16:28:52 +01:00
Alex Deucher
70471860ff drm/radeon: don't share PPLLs on DCE4.1
Sharing PPLLs seems to cause problems on some boards.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=45334

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-01 15:25:55 -04:00
Alex Deucher
6960394fe2 drm/radeon/dpm: fix typo in setting smc flag
PPSMC_EXTRAFLAGS_AC2DC_GPIO5_POLARITY_HIGH should be
set in extraFlags, not systemFlags.

Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:55 -04:00
Maarten Lankhorst
28a326c592 drm/radeon: fixup locking inversion between, mmap_sem and reservations
op 08-10-13 18:58, Thomas Hellstrom schreef:
> On 10/08/2013 06:47 PM, Jerome Glisse wrote:
>> On Tue, Oct 08, 2013 at 06:29:35PM +0200, Thomas Hellstrom wrote:
>>> On 10/08/2013 04:55 PM, Jerome Glisse wrote:
>>>> On Tue, Oct 08, 2013 at 04:45:18PM +0200, Christian König wrote:
>>>>> Am 08.10.2013 16:33, schrieb Jerome Glisse:
>>>>>> On Tue, Oct 08, 2013 at 04:14:40PM +0200, Maarten Lankhorst wrote:
>>>>>>> Allocate and copy all kernel memory before doing reservations. This prevents a locking
>>>>>>> inversion between mmap_sem and reservation_class, and allows us to drop the trylocking
>>>>>>> in ttm_bo_vm_fault without upsetting lockdep.
>>>>>>>
>>>>>>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
>>>>>> I would say NAK. Current code only allocate temporary page in AGP case.
>>>>>> So AGP case is userspace -> temp page -> cs checker -> radeon ib.
>>>>>>
>>>>>> Non AGP is directly memcpy to radeon IB.
>>>>>>
>>>>>> Your patch allocate memory memcpy userspace to it and it will then be
>>>>>> memcpy to IB. Which means you introduce an extra memcpy in the process
>>>>>> not something we want.
>>>>> Totally agree. Additional to that there is no good reason to provide
>>>>> anything else than anonymous system memory to the CS ioctl, so the
>>>>> dependency between the mmap_sem and reservations are not really
>>>>> clear to me.
>>>>>
>>>>> Christian.
>>>> I think is that in other code path you take mmap_sem first then reserve
>>>> bo. But here we reserve bo and then we take mmap_sem because of copy
>>> >from user.
>>>> Cheers,
>>>> Jerome
>>>>
>>> Actually the log message is a little confusing. I think the mmap_sem
>>> locking inversion problem is orthogonal to what's being fixed here.
>>>
>>> This patch fixes the possible recursive bo::reserve caused by
>>> malicious user-space handing a pointer to ttm memory so that the ttm
>>> fault handler is called when bos are already reserved. That may
>>> cause a (possibly interruptible) livelock.
>>>
>>> Once that is fixed, we are free to choose the mmap_sem ->
>>> bo::reserve locking order. Currently it's bo::reserve->mmap_sem(),
>>> but the hack required in the ttm fault handler is admittedly a bit
>>> ugly.  The plan is to change the locking order to
>>> mmap_sem->bo::reserve
>>>
>>> I'm not sure if it applies to this particular case, but it should be
>>> possible to make sure that copy_from_user_inatomic() will always
>>> succeed, by making sure the pages are present using
>>> get_user_pages(), and release the pages after
>>> copy_from_user_inatomic() is done. That way there's no need for a
>>> double memcpy slowpath, but if the copied data is very fragmented I
>>> guess the resulting code may look ugly. The get_user_pages()
>>> function will return an error if it hits TTM pages.
>>>
>>> /Thomas
>> get_user_pages + copy_from_user_inatomic is overkill. We should just
>> do get_user_pages which fails with ttm memory and then use copy_highpage
>> helper.
>>
>> Cheers,
>> Jerome
> Yeah, it may well be that that's the preferred solution.
>
> /Thomas
>
I still disagree, and shuffled radeon_ib_get around to be called sooner.

How does the patch below look?
8<-------
Allocate and copy all kernel memory before doing reservations. This prevents a locking
inversion between mmap_sem and reservation_class, and allows us to drop the trylocking
in ttm_bo_vm_fault without upsetting lockdep.

Changes since v1:
- Kill extra memcpy for !AGP case.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:54 -04:00
Christian König
db96bd2586 drm/radeon: clear the page directory using the DMA
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:54 -04:00
Christian König
5b2906ecf4 drm/radeon: initially clear page tables
Clear page tables after allocating them in case
we don't completely fill them later.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:53 -04:00
Christian König
24c164393d drm/radeon: drop CP page table updates & cleanup v2
The DMA ring seems to be stable now.

v2: remove pt_ring_index as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:52 -04:00
Christian König
74d360f66b drm/radeon: add vm_set_page tracepoint
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:52 -04:00
Christian König
f9eaf9ae78 drm/radeon: rework and fix reset detection v2
Stop fiddling with jiffies, always wait for RADEON_FENCE_JIFFIES_TIMEOUT.
Consolidate the two wait sequence implementations into just one function.
Activate all waiters and remember if the reset was already done instead of
trying to reset from only one thread.

v2: clear reset flag earlier to avoid timeout in IB test

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:51 -04:00
Marek Olšák
1dac28eb72 drm/radeon: don't use PACKET2 on CIK
It is said to cause hangs.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:51 -04:00
Christian König
727ddc84a1 drm/radeon: fix UVD destroy IB size
The parameter is in bytes not dwords.

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:50 -04:00
Christian König
c154a76311 drm/radeon: activate UVD clocks before sending the destroy msg
Make sure the UVD clocks are still active before sending
the destroy message, otherwise the hw might hang.

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:50 -04:00
Alex Deucher
d5693761b2 drm/radeon/si: fix define for MC_SEQ_TRAIN_WAKEUP_CNTL
Typo in the register offset.

Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-11-01 15:25:49 -04:00
Alex Deucher
6ba81e538a drm/radeon: fix endian handling in rlc buffer setup
The buffers needs to be in little endian format.

Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:48 -04:00
Alex Deucher
14ac88af15 drm/radeon/dpm: retain user selected performance level across state changes
If the user has forced the state high or low, retain that preference
even when we switch power states.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=70654

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:48 -04:00
Alex Deucher
0a17af373c drm/radeon: disable force performance state when thermal state is active
If the thermal state is active, we are in the lowest performance level
to cool down the chip.  Don't let the user force it higher.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:47 -04:00
Alex Deucher
ab70b1dde7 drm/radeon: enable DPM by default on r7xx asics
Seems to be stable on them.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:47 -04:00
Alex Deucher
59f7a2f2da drm/radeon: enable DPM by default on evergreen asics
Seems to be stable on them.  There are still some issues
with the performance states staying in the highest levels
on certain cards when multiple monitors are attached, but
being that the the cards are always in their highest power
state at boot up anyway, this doesn't really change anything
and improves things in all other cases.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 15:25:46 -04:00
Alex Deucher
56684ec5b0 drm/radeon: enable DPM by default on BTC asics
Seems to be stable on them.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:23 -04:00
Alex Deucher
68bc7785a7 drm/radeon: enable DPM by default on SI asics
Seems to be stable on them and improves peformance
as most SI asics have very low boot clocks.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:22 -04:00
Alex Deucher
5a16f7614e drm/radeon: enable DPM by default on SUMO/PALM APUs
DPM seems to be stable on these asics and it drastically
improves performance depending on the boot clocks.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:22 -04:00
Alex Deucher
033a37df15 drm/radeon/dpm: only print dpm debugging messages when radeon_dpm=1
Avoids spamming the system log for chips where dpm is enabled by
default, but prints then messages when users force it on for other
asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:21 -04:00
Markus Trippelsdorf
846ae41ae9 drm/radeon: Implement radeon_pci_shutdown
Currently radeon devices are not properly shutdown during kexec. This
causes a varity of issues, e.g. dpm initialization failures.
Fix this by implementing a radeon_pci_shutdown function, that unloads
the driver cleanly.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:20 -04:00
Alex Deucher
b188025888 drm/radeon/audio: write audio/video latency info for DCE6/8
Needed by the hda driver to properly set up synchronization
on the audio side.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2013-11-01 12:43:20 -04:00
Alex Deucher
712fd8a2cd drm/radeon/audio: write audio/video latency info for DCE4/5
Needed by the hda driver to properly set up synchronization
on the audio side.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2013-11-01 12:43:19 -04:00
Alex Deucher
8a992ee145 drm/radeon/audio: break out of loops once we match connector
No need to continue with the loops once we've matched
the appropriate connector.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:19 -04:00
Alex Deucher
4039096199 drm/radeon/atom: don't call [EN|DIS]ABLE_OUTPUT on DCE4.x
The plain [EN|DIS]ABLE functions do the same thing and more
and aren't broken on some systems like [EN|DIS]ABLE_OUTPUT.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:18 -04:00
Alex Deucher
43a340262a drm/radeon/atom: don't call [EN|DIS]ABLE_OUTPUT on DCE3.x
The plain [EN|DIS]ABLE functions do the same thing and more
and aren't broken on some systems like [EN|DIS]ABLE_OUTPUT.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:18 -04:00
Alex Deucher
4573388c92 drm/radeon/si: tell dpm there is a display connected
On SI asics, the SMC will automatically force the performance
level to the lowest level if there are no displays active.  This
prevents automatic performance scaling on PowerXpress systems or
for offscreen rendering or compute when displays are disabled.

Going forward, it would be best to dynamically change this, but
for now leave scaling enabled.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=69395

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:17 -04:00
Alex Deucher
c9dbd70552 drm/radeon: implement blit copy callback for CIK
Uses the CP ring rather than the DMA ring.  Useful
for debugging and benchmarking.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:16 -04:00
Dan Carpenter
43e917251a drm/radeon/dpm: cleanup a type issue with rv6xx_clocks_per_unit()
The rv6xx_clocks_per_unit() function pretends it can set flags in a u64
bitfield but really because "1" is an int it doesn't work for more than
32 bits.  The only caller truncates the high bits away anyway.  I've
just changed it to be a u32.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:16 -04:00
Alex Deucher
5c72273913 drm/radeon: plug in blit copy routine for SI
Uses CP DMA packet just like previous asics.
Useful for debugging and benchmarking.  Uses
same packet format as prior asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:15 -04:00
Alex Deucher
ad41550666 drm/radeon: enable hdmi audio by default
Seems to be stable enough for the majority of users.
It can be disabled on the fly via connector attributes.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:15 -04:00
Dave Airlie
10ebc0bc09 drm/radeon: add runtime PM support (v2)
This hooks radeon up to the runtime PM system to enable
dynamic power management for secondary GPUs in switchable
and powerxpress laptops.

v2: agd5f: clean up, add module parameter

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:14 -04:00
Dave Airlie
7473e830c4 drm/radeon: convert to pmops
This is a pre-requisite for runtime pm on powerxpress systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:14 -04:00
Alex Deucher
6214bb7487 drm/radeon: add a connector property for dither
Allows you to enable dither in the display hardware
when the monitor supports lower a lower bpc than the
current framebuffer format.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:13 -04:00
Alex Deucher
134b480f4b drm/radeon: Add support for programming the FMT blocks
The FMT blocks control how data is sent from the backend
of the display pipe to to monitor.  Proper set up of the
FMT blocks are required for 30bpp formats.  Additionally,
dithering can be enabled on for better display with 18 and
24bpp displays.  The exception is LVDS/eDP which atom
takes care of in the SelectCRTC_Source table.  For now
just enable truncation until we test dithering more.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:12 -04:00
Alex Deucher
cdf6e80584 drm/radeon/dpm: fix incompatible casting on big endian
We use u16 for voltage values throughout the driver so switch
the table values to a u16 as well.  Fixes an incompatible
cast error in ci_patch_clock_voltage_limits_with_vddc_leakage()
picked up by coverity.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-23 16:25:18 -04:00
Alex Deucher
d48d88b21e drm/radeon: disable bapm on KB
May cause stability problems on some boards.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-23 16:25:18 -04:00
Alex Deucher
de926800b1 drm/radeon: use sw CTS/N values for audio on DCE4+
Use the driver calculated CTS and N values rather than
having hardware generate them.  This allows us to use
the modeline pixel clock rather than the actual pll clock
when setting up the dto for audio.  Fixes problems with
audio playback rate on certain asics if the pll clock
does not match the pixel clock exactly.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-23 16:25:12 -04:00
Dave Airlie
5bdebb183c drm/sysfs: sort out minor and connector device object lifetimes.
So drm was abusing device lifetimes, by having embedded device structures
in the minor and connector it meant that the lifetime of the internal drm
objects (drm_minor and drm_connector) were tied to the lifetime of the device
files in sysfs, so if something kept those files opened the current code
would kfree the objects and things would go downhill from there.

Now in reality there is no need for these lifetimes to be so intertwined,
especailly with hotplugging of devices where we wish to remove the sysfs
and userspace facing pieces before we can unwind the internal objects due
to open userspace files or mmaps, so split the objects out so the struct
device is no longer embedded and do what fbdev does and just allocate
and remove the sysfs inodes separately.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-22 09:37:40 +01:00
Alex Deucher
555b1b651a drm/radeon/audio: don't set speaker allocation on DCE4+
It causes hangs on some asics.  Disable on DCE6+ as well
just to be on the safe side.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18 20:00:09 -04:00
Alex Deucher
108dc8e8b4 drm/radeon: rework audio option
In 3.12 I changed audio to be enabled by default,
but you still had to turn it on via xrandr.  This
was confusing to users so change it to minic the
previous behavior:

- audio option is set to -1 (auto) by default which is
  the current 3.12 behavior (audio is enabled but requires
  xrandr to turn it on).
- if audio = 1, the audio is enabled without needing
  to mess with xrandr (previous behavior)
- audio = 0 disables audio

It retains the new feature of allowing the user to enable
audio on the fly with xrandr, but turns audio on
automatically if radeon.audio=1 is set which is what
most users expect.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2013-10-18 16:16:19 -04:00
Alex Deucher
4b7495770c drm/radeon/audio: don't set speaker allocation on DCE3.2
It causes hangs on some asics.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=70439

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2013-10-18 16:16:18 -04:00
Alex Deucher
d30d71e85a drm/radeon: make missing smc ucode non-fatal (CI)
Prevent driver load problems if the smc is missing.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63011

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18 16:16:17 -04:00
Alex Deucher
d83671126d drm/radeon: make missing smc ucode non-fatal (r7xx-SI)
Prevent driver load problems if the smc is missing.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63011

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: stable@vger.kernel.org
2013-10-18 16:16:17 -04:00
Christian König
bcf6f1e935 drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3
This only seem to work for H.264 but not for VC-1 streams.

Need to investigate further why exactly.

This reverts commit 4b40e59212.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18 16:16:16 -04:00
Christian König
5510f124c6 drm/radeon: stop the leaks in cik_ib_test
Stop leaking IB memory and scratch register space when the test fails.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18 16:16:16 -04:00
Alex Deucher
c23632d4e5 drm/radeon/atom: workaround vbios bug in transmitter table on rs780
Some rs780 asics seem to be affected as well.

See:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91f3a6aaf280294b07c05dfe606e6c27b7ba3c72

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60791

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-10-18 16:16:15 -04:00
Alex Deucher
b852c98501 drm/radeon: re-enable sw ACR support on pre-DCE4
HW ACR support may have issues on some older chips, so
use SW ACR for now until we've tested further.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: Rafał Miłecki <zajec5@gmail.com>
2013-10-10 11:47:01 -04:00
Alex Deucher
4076a65544 drm/radeon/dpm: disable bapm on TN asics
Causes hangs on certain boards.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=70053

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09 17:13:50 -04:00
Alex Deucher
fb2c7f4d2e drm/radeon: improve soft reset on CIK
Disable CG/PG before resetting.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09 17:13:49 -04:00
Alex Deucher
a6f4ae8dc9 drm/radeon: improve soft reset on SI
Disable CG/PG and stop the rlc before resetting.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-10-09 17:13:49 -04:00