Commit Graph

144 Commits

Author SHA1 Message Date
Tobias Jordan
62bbc864d1
spi: pxa2xx: check clk_prepare_enable() return value
clk_prepare_enable() can fail, so its return value should be checked and
acted upon.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 3343b7a6d2 ("spi/pxa2xx: convert to the common clk framework")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-04 08:40:05 +09:00
kbuild test robot
71293a60e3
spi: pxa2xx: pxa2xx_spi_transfer_one() can be static
Fixes: d5898e19c0 ("spi: pxa2xx: Use core message processing loop")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18 12:01:35 +01:00
Jarkko Nikula
d5898e19c0
spi: pxa2xx: Use core message processing loop
Convert the pump_transfers() transfer tasklet to transfer_one() hook the
SPI core calls to process single transfer instead of handling message
processing and chip select handling in the driver. This not only
simplifies the driver but also brings transfer statistics from the core.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17 17:11:30 +01:00
Jarkko Nikula
8ae55af388
spi: pxa2xx: Remove pump_transfers string from dev_ prints
We are going to rename and modify pump_transfers(). Prepare for it by
removing the string "pump_transfers:" from error and warning prints.

While at it make these user-visible strings single line in sources as it
helps source grepping from error reports.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17 17:11:25 +01:00
Jarkko Nikula
1f99f8938b
spi: pxa2xx: Remove unused argument from pxa2xx_spi_dma_prepare()
Current DMA engine implementation of pxa2xx_spi_dma_prepare() don't use
the dma_burst argument. Remove it since it became unused after
commit 6356437e65 ("spi: spi-pxa2xx: remove legacy PXA DMA bits").

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17 17:11:21 +01:00
Mark Brown
8aaeae7e61
Merge remote-tracking branches 'spi/topic/jcore', 'spi/topic/kconfig', 'spi/topic/orion', 'spi/topic/pxa2xx' and 'spi/topic/rspi' into spi-next 2018-04-02 15:56:39 +01:00
Jarkko Nikula
e2b714afee
spi: pxa2xx: Disable runtime PM if controller registration fails
Don't leave runtime PM enabled in case devm_spi_register_controller()
returns with an error. Otherwise runtime PM will complain when driver is
reloaded:

[  693.855811] pxa2xx-spi pxa2xx-spi.13: Unbalanced pm_runtime_enable!

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 15:08:04 +00:00
Jarkko Nikula
3cc7b0e357
spi: pxa2xx: Convert to generalized SPI controller API
Convert to generalized SPI controller API introduced by the
commit 8caab75fd2 ("spi: Generalize SPI "master" to "controller"").
Inside driver variable name "master" is still used to indicate the driver
is master only.

While at it, change "unsigned cs" to "unsigned int cs" in
pxa2xx_spi_fw_translate_cs() to suppress checkpatch warning.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12 12:04:24 +00:00
Jarkko Nikula
104e51af79
spi: pxa2xx: Move SSP idle waiting to cs_deassert()
Move SSP idle waiting before CS deassert from error and end of message
handling function giveback() to cs_deassert(). This ensures idle waiting
is done also if there is CS change between transfers.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12 09:31:40 +00:00
Mark Brown
a885eebc1b
spi: pxa2xx: Use gpiod_put() not gpiod_free()
gpiod_free() is an internal function for gpiolib, gpiod_put() is the
correct external function.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-22 16:15:36 +00:00
Rasmus Villemoes
221886646f
spi: pxa2xx: avoid redundant gpio_to_desc(desc_to_gpio()) round-trip
gpio_free(gpio) simply does gpiod_free(gpio_to_desc(gpio)), so it's
simpler and cleaner to use gpiod_free directly.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-21 12:19:02 +00:00
Jan Kiszka
c18d925fca spi: pxa2xx: Convert to GPIO descriptor API where possible
We still need to request/free GPIOs passed via the legacy path of
pxa2xx_spi_chip::gpio_cs, but we can use the gpiod API otherwise.

Consistently use the descriptor API instead of the legacy one.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-04 12:41:55 +01:00
Andy Shevchenko
d35f2dc9a2 spi: pxa2xx: Don't touch CS pin until we have a transfer pending
GPIO descriptors, when being requested, may configure pin at the same
time. In case of SPI chip select we shouldn't do any assumptions of the
state of pin since we don't know yet what chip is connected there and if
it uses high or low active state. So, leave the state of pin as is until
transfer will start.

Fixes: 99f499cd65 ("spi: pxa2xx: Add support for GPIO descriptor chip selects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westeberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-28 13:33:18 +01:00
Andy Shevchenko
6ac5a435ae spi: pxa2xx: Revert "Only claim CS GPIOs when the slave device is created"
There is a valid case to call setup() following by setup_cs() several
times for the same chip.

With the commit

  676a4e3bab ("spi: pxa2xx: Only claim CS GPIOs when the slave device is created")

it is not possible anymore due to GPIO line being requested already
during the first call to setup_cs().

For now, revert the commit to make things work again.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-27 17:11:24 +01:00
Jan Kiszka
676a4e3bab spi: pxa2xx: Only claim CS GPIOs when the slave device is created
Avoid hogging chip select GPIOs just because they are listed for the
master. They might be mulitplexed and, if no slave device is attached,
used for different purposes. Moreover, this strategy avoids having to
allocate a cs_gpiods structure.

Tested on the IOT2000 where the second SPI bus is connected to an
Arduino-compatible connector and multiplexed between SPI, GPIO and PWM
usage.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17 12:09:52 +01:00
Jarkko Nikula
fc0b2acc75 spi: pxa2xx: Add support for Intel Cannonlake
Intel Cannonlake LPSS SPI has up to four chip selects per port like in
Broxton and is clocked like Sunrisepoint and Kaby Lake. Add a new type
LPSS_CNL_SSP and configuration that enable runtime chip select detection
and use the same FIFO thresholds than in Sunrisepoint.

Patch adds support for both Cannonlake SoC and PCH.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-06 20:01:15 +01:00
Mark Brown
2016d52a38 Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/lantiq-ssc', 'spi/topic/mpc52xx', 'spi/topic/ppc4xx' and 'spi/topic/pxa2xx' into spi-next 2017-02-19 16:41:01 +00:00
Jan Kiszka
e51e9b9304 spi: pxa2xx: Prepare for edge-triggered interrupts
When using the a device with edge-triggered interrupts, such as MSIs,
the interrupt handler has to ensure that there is a point in time during
its execution where all interrupts sources are silent so that a new
event can trigger a new interrupt again.

This is achieved here by disabling all interrupt sources for a moment
before processing them according to the status register. If a new
interrupt should have arrived after we read the status, it will now
re-trigger the interrupt, even in edge mode.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-23 18:09:37 +00:00
David E. Box
e18a80acd1 spi: pxa2xx: Add support for Intel Gemini Lake
Gemini Lake reuses the same LPSS SPI configuration as Broxton

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-19 14:55:21 +00:00
Jan Kiszka
b03124825b spi: pxa2xx: Factor out handle_bad_msg
As suggested by Andy Shevchenko: Decouple this corner cause from the
general handling logic in ssp_int.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-17 18:17:20 +00:00
Andy Shevchenko
a2dd8af00c spi: pxa2xx: add missed break
The commit 7c7289a404 ("spi: pxa2xx: Default thresholds to PXA
configuration") while splitting up CE4100 code obviously missed a break
condition in one chunk. Add it here.

Looks like we have no active user of CE4100, though better to fix this later
than never.

Fixes: commit 7c7289a404 ("spi: pxa2xx: Default thresholds to PXA configuration")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-04 18:36:22 +00:00
Mika Westerberg
089bd46d8b spi: pxa2xx: Fix build error because of missing header
Kbuild test robot reports:

  drivers/spi/spi-pxa2xx.c: In function ‘setup_cs’:
  drivers/spi/spi-pxa2xx.c:1190:20: error: implicit declaration of function ‘desc_to_gpio’
  ...

Reason for this is the fact that those functions are declared in
linux/gpio/consumer.h which is not included in the driver. Fix this by
including it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29 11:00:41 -07:00
Mika Westerberg
99f499cd65 spi: pxa2xx: Add support for GPIO descriptor chip selects
The driver uses custom chip_info coming from platform data for chip selects
implemented as GPIOs. If the system lacks board files setting up the
platform data, it is not possible to use GPIOs as chip selects.

This adds support for GPIO descriptors so that regardless of the underlying
firmware interface (DT, ACPI or platform data) the driver can request GPIOs
used as chip selects and configure them accordingly.

The custom chip_info GPIO support is still left there to make sure the
existing systems keep working as expected.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26 09:11:14 -07:00
Andy Shevchenko
7c7289a404 spi: pxa2xx: Default thresholds to PXA configuration
Most of the devices in the supported list have PXA configuration of FIFO. In
particularly Intel Medfield and Merrifield have bigger FIFO, than it's defined
for CE4100.

Split CE4100 in the similar way how it was done for Intel Quark, i.e. prefix
definitions by CE4100 and append necessary pieces of code to switch case
conditions.

We are on safe side since those bits are ignored on all LPSS IPs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:43 +01:00
Jarkko Nikula
96579a4e56 spi: pxa2xx: Remove pointer to chip data from driver data
Transfer state machine in this driver does not need to set/unset pointer
to chip data between queueing and finalizing message as it is not
actually used as a state info itself but just pointer passing.

Since this per SPI device specific chip data is already carried in
ctldata use that and remove pointer to chip data from driver data.

While at it, group initialized variables before uninitialized variables
in pump_transfers().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Jarkko Nikula
4fc0caac06 spi: pxa2xx: Remove pointer to current SPI message from driver data
There is no need to carry pointer to current SPI message in driver data
because cur_msg in struct spi_master holds it already when driver is using
the message queueing infrastructure from the SPI core.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Jarkko Nikula
bffc967e93 spi: pxa2xx: Do not needlessly initialize stack variables
All of these variables are unconditionally set before their use.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Mark Brown
9a4506b60d Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/rockchip', 'spi/topic/s3c64xx', 'spi/topic/sh' and 'spi/topic/sh-msiof' into spi-next 2016-07-24 22:08:25 +01:00
Andy Shevchenko
152bc19e2f spi: pxa2xx: Clear all RFT bits in reset_sccr1() on Intel Quark
It seems the commit e5262d0568 ("spi: spi-pxa2xx: SPI support for Intel Quark
X1000") misses one place to be adapted for Intel Quark, i.e. in reset_sccr1().

Clear all RFT bits when call reset_sccr1() on Intel Quark.

Fixes: e5262d0568 ("spi: spi-pxa2xx: SPI support for Intel Quark X1000")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-07-07 11:47:11 +02:00
Mika Westerberg
704d2b0794 spi: pxa2xx: Add support for Intel Kaby Lake PCH-H
Kaby Lake PCH-H has the same SPI host controller as Skylake. Add these new
PCI IDs to the list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 14:42:17 +02:00
Jarkko Nikula
b6ced294fb spi: pxa2xx: Switch to SPI core DMA mapping functionality
SPI core provides DMA mapping with scatterlists. Start using it instead
of own implementation in spi-pxa2xx. Major difference in addition to
bunch of removed boilerplate code is that SPI core does
mapping/unmapping for all transfers in a message before and after the
message sending where spi-pxa2xx did mapping/unmapping for each
transfers separately.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21 18:44:48 +01:00
Jarkko Nikula
2d7537d8f6 spi: pxa2xx: Use local struct spi_master pointer in pump_transfers()
We will find more use for struct spi_master pointer in pump_transfers()
and code will be more readable if we access it using local pointer than
through the drv_data->master.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21 18:44:48 +01:00
Dan O'Donovan
c64e1265ae spi: pxa2xx: use DMA by default if supported
Currently, even if the PXA2xx SPI master supports DMA, it won't be
enabled unless (i) the slave device is enumerated through ACPI, or
(ii) the slave device is registered with board-specific
controller_data specified.  Even then, there isn't a field in the
controller_data that explicitly enables dma - it just gets enabled
if the master supports it and controller_data is non-NULL.

This means that drivers which register SPI devices on a bus without
awareness of this controller cannot avail of DMA performance gains.

This patch allows DMA transfers to be used if supported.

Signed-off-by: Dan O'Donovan <dan@emutex.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30 17:09:31 +01:00
Mark Brown
c8d6a77b58 Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qup', 'spi/topic/rockchip', 'spi/topic/st-ssc4' and 'spi/topic/xlp' into spi-next 2016-05-23 12:16:55 +01:00
Mark Brown
4b744afa7d Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/cadence', 'spi/topic/davinci' and 'spi/topic/dln2' into spi-next 2016-05-23 12:16:45 +01:00
Axel Lin
71c5e53b42 spi: Drop duplicate code to set master->dev.parent
It's done by spi_alloc_master().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-26 11:56:09 +01:00
Jarkko Nikula
66ec246eb9 spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT
Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI
capabilities register even they have one per port. Detection in
pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL
from spi_register_master() where chip select count is validated.

Fix this by not using SPI capabilities register on Sunrisepoint. They don't
have more than one chip select so use the default value 1 instead of
detection.

Fixes: 8b136baa58 ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-04-26 11:14:00 +01:00
Christophe Ricard
a52db659c7 spi: pxa2xx: Fix cs_change management
Fix cs_change management so that it is in line with other spi drivers.

In the spi core api helpers such as spi_bus_lock/unlock and spi_sync_locked
or cs_change field in spi_transfer help to manage chip select from the
device driver.

The driver was setting the chip select to idle if the message queue was
empty despite cs_change or other status field set by spi_bus_lock/unlock
or spi_sync_locked.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 19:42:14 +01:00
Jarkko Nikula
8c3ad488fe spi: pxa2xx: Use dummy buffers provided by SPI core
Dummy buffer is used for half duplex transfers that don't have TX or RX
buffer set. Instead of own dummy buffer management here let the SPI core to
handle it by setting the SPI_MASTER_MUST_RX and SPI_MASTER_MUST_TX flags.
Then core makes sure both transfer buffers are set.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 10:42:00 +01:00
Andy Shevchenko
7d1f1bf699 spi: pxa2xx: handle error of pxa2xx_spi_dma_prepare()
If by some reason pxa2xx_spi_dma_prepare() fails we have not to ignore its
error. In such case we abort the transfer and return the error to upper
level.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Jarkko: Avoid leaking TX descriptors in case RX descriptor allocation
fails. Noted by Robert Jarzmik <robert.jarzmik@free.fr>.
Unmap also buffers in case of failure.]
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 10:41:44 +01:00
Jarkko Nikula
c1b03f1164 spi: pxa2xx: Add support for Intel Broxton B-Step
Add support for third Intel Broxton variant and update comment for
A-Step variant.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Steve Sakoman <steve.sakoman@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02 19:58:08 +09:00
Jarkko Nikula
7c04b792d3 spi: pxa2xx: Remove unused DMA buffer mappings
Only legacy PXA DMA implementation was using these rx_dma and tx_dma DMA
addresses so they are not needed after commit 6356437e65
("spi: spi-pxa2xx: remove legacy PXA DMA bits").

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-21 02:10:16 +09:00
Mika Westerberg
30f3a6ab44 spi: pxa2xx: Add support for both chip selects on Intel Braswell
Intel Braswell LPSS SPI controller actually has two chip selects and there
is no capabilities register where this could be found out. These two chip
selects are controlled by bits which are in slightly differrent location
than Broxton has.

Braswell Windows driver also starts chip select (ACPI DeviceSelection)
numbering from 1 so translate it to be suitable for Linux as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09 19:01:11 +00:00
Mika Westerberg
c1e4a53c6b spi: pxa2xx: Move chip select control bits into lpss_config structure
Some Intel LPSS SPI controllers, like the one in Braswell has these bits in
a different location so move these bits to be part of the LPSS
configuration.

Since not all LPSS SPI controllers support multiple native chip selects we
refactor selecting chip select to its own function and check
control->cs_sel_mask before switching to another chip select.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09 19:01:07 +00:00
Mika Westerberg
0c27d9cf72 spi: pxa2xx: Translate ACPI DeviceSelection to Linux chip select on Baytrail
The Windows Baytrail SPI host controller driver uses 1 as the first (and
only) value for ACPI DeviceSelection like can be seen in DSDT taken from
Lenovo Thinkpad 10:

    Device (FPNT)
    {
        ...
        Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
        {
            Name (UBUF, ResourceTemplate ()
            {
                SpiSerialBus (0x0001, // DeviceSelection
                    PolarityLow, FourWireMode, 0x08,
                    ControllerInitiated, 0x007A1200, ClockPolarityLow,
                    ClockPhaseFirst, "\\_SB.SPI1",
                    0x00, ResourceConsumer,,)

This will fail to enumerate in Linux with following error:

[    0.241296] pxa2xx-spi 80860F0E:00: cs1 >= max 1
[    0.241312] spi_master spi32766: failed to add SPI device VFSI6101:00 from ACPI

To make the Linux SPI core successfully enumerate the device we provide a
custom version of ->fw_translate_cs() that translates DeviceSelection
correctly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09 19:01:01 +00:00
Jarkko Nikula
7a8d44bc89 spi: pxa2xx: Fix too early chipselect deassert
There is a chance that chipselect is deasserted too early while the last
clock cycle is still running. Protocol analyzers will see this as a failed
last byte. This is more likely to occur with slow bitrates, for instance
at 25 kbps.

Reason for this is when using SPI mode 0 that both SPI host controller and
SPI slave will drive the data lines at the falling edge of clock signal
and sample at the rising edge. Receive FIFO gets the last bit now at the
rising edge and code sees transfer to be finished either by the interrupt
in PIO mode or by the DMA completion in DMA mode.

The SSP Time Out register SSTO should take care of delaying the
completion but it does not seems to have effect at least on Intel
Skylake and Broxton even when using long enough values. Depending on
timing code may get into point where chipselect is deasserted while the
last clock cycle is still running at its second half cycle.

Fix this by adding a wait loop in giveback() that waits until SSP becomes
idle before deasserting the chipselect.

Reported-by: Weifeng Voon <weifeng.voon@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04 10:49:17 +00:00
Jarkko Nikula
07550df047 spi: pxa2xx: Update comment in int_transfer_complete()
The register writes here actually don't stop the SSP but clean and
disable interrupts and set the receive FIFO inactivity timeout to zero.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04 10:48:09 +00:00
Jarkko Nikula
ee03672d96 spi: pxa2xx: Print actual DMA/PIO transfer mode in debug messages
Transfer debug messages don't actually show is the transfer really using
DMA. Driver may fall back to PIO in case transfer size is not within the
certain limits or fails to map DMA buffers but debug messages don't reveal
that.

Move these debug messages further in pump_transfers() where the actual
transfer mode is known and use drv_data->dma_mapped flag instead of
chip->enable_dma for printing the mode.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 11:29:25 +00:00
Mika Westerberg
d599af65fd spi: pxa2xx: Remove redundant call to lpss_ssp_setup() in probe
Commit 8b136baa58 ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI
chip select signals") added a block where lpss_ssp_setup() gets called
again for Intel LPSS SPI host controllers before checking number of chip
selects from the capabilities register.

There is no point in calling the function twice in probe so remove the
first call.

Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20 18:19:14 +00:00
Mark Brown
4c84518523 Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next 2015-11-04 11:02:12 +00:00