Commit Graph

18 Commits

Author SHA1 Message Date
Krzysztof Kozlowski
f6541f347b
MIPS: configs: Cleanup old Kconfig options
CONFIG_MTD_NAND_IDS is gone and not needed (part of CONFIG_MTD_NAND)
since commit f16bd7ca04 ("mtd: nand: Kill the MTD_NAND_IDS Kconfig
option").

CONFIG_IOSCHED_DEADLINE, CONFIG_IOSCHED_CFQ and CONFIG_DEFAULT_NOOP are
gone since commit f382fb0bce ("block: remove legacy IO schedulers").

The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).

The BFQ_GROUP_IOSCHED is the only multiqueue scheduler which comes with
group scheduling so select it in configs previously choosing
CFQ_GROUP_IOSCHED.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
2020-02-19 10:48:27 -08:00
Alexander Lobakin
7de86604bb
MIPS: generic: don't unconditionally select PINCTRL
CONFIG_PINCTRL was converted from hidden selectable to a visible option
with commit d219b92461 ("pinctrl: change Kconfig PINCTRL variable to
a menuconfig"). Remove unconditional select and enable this symbol in
Ocelot config, which currently is the only user among generic boards.

Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: Will Deacon <will@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2020-01-22 10:16:45 -08:00
Richard Weinberger
1c7cbd6347 NAND core changes:
- Support having the bad block markers in either the first, second or
   last page of a block. The combination of all three location is now
   possible.
 - Constification of NAND_OP_PARSER(_PATTERN) elements.
 - Generic NAND DT bindings changed to yaml format (can be used to
   check the proposed bindings. First platform to be fully supported:
   sunxi.
 - Stopped using several legacy hooks.
 - Preparation to use the generic NAND layer with the addition of
   several helpers and the removal of the struct nand_chip from generic
   functions.
 - Kconfig cleanup to prepare the introduction of external ECC engines
   support.
 - Fallthrough comments.
 - Introduction of the SPI-mem dirmap API for SPI-NAND devices.
 
 Raw NAND controller drivers changes:
 - nandsim:
   * Switch to ->exec-op().
 - meson:
   * Misc cleanups and fixes.
   * New OOB layout.
 - Sunxi:
   * A23/A33 NAND DMA support.
 - Ingenic:
   * Full reorganization and cleanup.
   * Clear separation between NAND controller and ECC engine.
   * Support JZ4740 an JZ4725B.
 - Denali:
   * Clear controller/chip separation.
   * ->exec_op() migration.
   * Various cleanups.
 - fsl_elbc:
   * Enable software ECC support.
 - Atmel:
   * Sam9x60 support.
 - GPMI:
   * Introduce the GPMI_IS_MXS() macro.
 - Various trivial/spelling/coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAly4rnMACgkQJWrqGEe9
 VoSBzAgAmSx1rDxiX2033dhVvufCcqMQnkY1fguKo69lYkhgGI1EYwvq2NbGLCf4
 rb7n+D1peYhzH/9GKz4/LPQPccoVIQnx9+Z+JMZRzyQ+Z73cuomX/DtQO0AsRZgE
 bx88vsbQFtjWv0mVluIEs51e3B/4ya6KPotxUDcaAyp2s/VKPaEI1rpiteUx8lZC
 QsPsYQG/ryYiBW0cmopRL6c7ZdXyWi5A0kEdypGyO8ybTxo8xBquFqhbraDlM4U2
 2H3Ii3iV9HoVTyjG2nGIA094Ak0U029oWW+P9xAPf1L4z6WIVXD68sazpZng+t8s
 HgWP7BYDpcdRj+/Dm1b+uoaJH1fvOQ==
 =B7w9
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- Support having the bad block markers in either the first, second or
  last page of a block. The combination of all three location is now
  possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
  check the proposed bindings. First platform to be fully supported:
  sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
  several helpers and the removal of the struct nand_chip from generic
  functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
  support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.

Raw NAND controller drivers changes:
- nandsim:
  * Switch to ->exec-op().
- meson:
  * Misc cleanups and fixes.
  * New OOB layout.
- Sunxi:
  * A23/A33 NAND DMA support.
- Ingenic:
  * Full reorganization and cleanup.
  * Clear separation between NAND controller and ECC engine.
  * Support JZ4740 an JZ4725B.
- Denali:
  * Clear controller/chip separation.
  * ->exec_op() migration.
  * Various cleanups.
- fsl_elbc:
  * Enable software ECC support.
- Atmel:
  * Sam9x60 support.
- GPMI:
  * Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
2019-05-05 11:54:11 +02:00
Miquel Raynal
72c5af0027 mtd: rawnand: Clarify Kconfig entry MTD_NAND
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:00 +02:00
Miquel Raynal
9bb94643b9 mtd: nand: Clarify Kconfig entry for software Hamming ECC entries
The software Hamming ECC correction implementation is referred as
MTD_NAND_ECC which is too generic. Rename it
MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an
SMC quirk in the Hamming implementation as
MTD_NAND_ECC_SW_HAMMING_SMC.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:00 +02:00
Miquel Raynal
714c068228 mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm
There is no point in having two distinct entries, merge them and
rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:00 +02:00
Horatiu Vultur
6e3572e83d
MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig
Some of the configuration were not selected by default anymore, therefore
enable them again. Also remove some configs which are used for MSCC Ocelot.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: <alexandre.belloni@bootlin.com>
Cc: <UNGLinuxDriver@microchip.com>
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
2019-04-04 11:14:45 -07:00
Alexandre Belloni
0e557a3e06
MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
Add support for the integrated switch, and the SPI and I2C controller found
on MSCC Ocelot.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20345/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:15 -07:00
Alexandre Belloni
6bce3deae4
MIPS: generic: Add support for Microsemi Ocelot
Introduce support for the MIPS based Microsemi Ocelot SoCs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Allan Nielsen <Allan.Nielsen@microsemi.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18858/
[jhogan@kernel.org: update ocelot_defconfig specification]
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21 23:33:10 +00:00
James Hogan
35868f0959
MIPS: generic: Enable crc32-mips on r6 configs
Enable the crc32-mips module on MIPS generic r6 configs, where the
required MIPS r6 CRC instructions may be available.

As well as allowing the CRC instructions to be utilised, this should
also ensure the module gets some build coverage.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Marcin Nowakowski <marcin.nowakowski@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18602/
2018-02-19 20:50:36 +00:00
Miodrag Dinic
f2d0b0d5c1
MIPS: ranchu: Add Ranchu as a new generic-based board
Provide amendments to the MIPS generic platform framework so that
the new generic-based board Ranchu can be chosen to be built.

The Ranchu board is intended to be used by Android emulator. The name
"Ranchu" originates from Android development community. "Goldfish" and
"Ranchu" are terms used for two generations of virtual boards used by
Android emulator. The name "Ranchu" is a newer one among the two, and
this patch deals with Ranchu. However, for historical reasons, some
devices/drivers still contain the name "Goldfish".

MIPS Ranchu machine includes a number of Goldfish devices. The support
for Virtio devices is also included. Ranchu board supports up to 16
Virtio devices which can be attached using Virtio MMIO Bus. This is
summarized in the following picture:

       ABUS
        ||----MIPS CPU
        ||       |                    IRQs
        ||----Goldfish PIC------------(32)--------
        ||                     | | | | | | | | |
        ||----Goldfish TTY------ | | | | | | | |
        ||                       | | | | | | | |
        ||----Goldfish RTC-------- | | | | | | |
        ||                         | | | | | | |
        ||----Goldfish FB----------- | | | | | |
        ||                           | | | | | |
        ||----Goldfish Events--------- | | | | |
        ||                             | | | | |
        ||----Goldfish Audio------------ | | | |
        ||                               | | | |
        ||----Goldfish Battery------------ | | |
        ||                                 | | |
        ||----Android PIPE------------------ | |
        ||                                   | |
        ||----Virtio MMIO Bus                | |
        ||    |    |    |                    | |
        ||    |    |   (virtio-block)--------- |
        ||   (16)  |                           |
        ||    |   (virtio-net)------------------

Device Tree is created on the QEMU side based on the information about
devices IO map and IRQ numbers. Kernel will load this DTB using UHI
boot protocol DTB handover mode.

Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18138/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-22 20:47:34 +00:00
Zubair Lutfullah Kakakhel
b35565bb16 MIPS: generic: Add support for MIPSfpga
Add support for the MIPSfpga platform to generic kernel.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15846/
[jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and
 little endian requires to board-xilfpga.config]
Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08 22:53:44 +00:00
Paul Burton
9e111ee7c3 MIPS: NI 169445: Only include in 32r2el kernels
The NI 169445 board uses a little endian MIPS32r2 CPU, and therefore
including board support in kernels that are unable to run on such a CPU
is pointless.

Specify requirements in the board config fragment that cause the NI
169445 board support to only be included in generic kernels that target
little endian MIPS32r2 CPUs.

For example, NI 169445 support will be included when configuring using
32r2el_defconfig but not when using 64r6_defconfig.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16945/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30 00:57:28 +02:00
Paul Burton
c7a1d3d8ad MIPS: SEAD-3: Only include in 32 bit kernels by default
The MIPS SEAD-3 development board has only ever been used with 32 bit
CPUs, so including support for it in 64 bit kernels is wasteful since
those kernels will never run on a SEAD-3.

Specify a requirement in the SEAD-3 board config fragment that ensures
the board support is only included in 32 bit kernels, by checking that
CONFIG_32BIT=y.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16944/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30 00:57:28 +02:00
Nathan Sullivan
7aacf86b75 MIPS: NI 169445 board support
Support the National Instruments 169445 board.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16782/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:51 +02:00
Paul Burton
6e62a88802 MIPS: generic: Support MIPS Boston development boards
Add support for the MIPS Boston development board to generic kernels,
which essentially amounts to:

  - Adding the device tree source for the MIPS Boston board.

  - Adding a Kconfig fragment which enables the appropriate drivers for
    the MIPS Boston board.

With these changes in place generic kernels will support the board by
default, and kernels with only the drivers needed for Boston enabled can
be configured by setting BOARDS=boston during configuration. For
example:

  $ make ARCH=mips 64r6el_defconfig BOARDS=boston

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-11 14:13:06 +02:00
Paul Burton
3f5f0a4475 MIPS: generic: Convert SEAD-3 to a generic board
Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.

Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:04:20 +02:00
Paul Burton
eed0eabd12 MIPS: generic: Introduce generic DT-based board support
Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.

Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.

Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:04:04 +02:00