Currently, rcu_do_batch() invokes rcu_segcblist_is_offloaded() each time
it needs to know whether the current CPU is a no-CBs CPU. Given that it
is not possible to change the no-CBs status of a CPU after boot, and given
that it is not possible to even have no-CBs CPUs in CONFIG_RCU_NOCB_CPU=n
kernels, this per-callback invocation wastes CPU. This commit therefore
created a const on-stack variable to allow this check to be done only
once per rcu_do_batch() invocation.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit removes the obsolete nocb_q_count and nocb_q_count_lazy
fields, also removing rcu_get_n_cbs_nocb_cpu(), adjusting
rcu_get_n_cbs_cpu(), and making rcutree_migrate_callbacks() once again
disable the ->cblist fields of offline CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently the RCU callbacks for no-CBs CPUs are queued on a series of
ad-hoc linked lists, which means that these callbacks cannot benefit
from "drive-by" grace periods, thus suffering needless delays prior
to invocation. In addition, the no-CBs grace-period kthreads first
wait for callbacks to appear and later wait for a new grace period,
which means that callbacks appearing during a grace-period wait can
be delayed. These delays increase memory footprint, and could even
result in an out-of-memory condition.
This commit therefore enqueues RCU callbacks from no-CBs CPUs on the
rcu_segcblist structure that is already used by non-no-CBs CPUs. It also
restructures the no-CBs grace-period kthread to be checking for incoming
callbacks while waiting for grace periods. Also, instead of waiting
for a new grace period, it waits for the closest grace period that will
cause some of the callbacks to be safe to invoke. All of these changes
reduce callback latency and thus the number of outstanding callbacks,
in turn reducing the probability of an out-of-memory condition.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
As a first step towards making no-CBs CPUs use the ->cblist, this commit
leaves the ->cblist enabled for these CPUs. The main reason to make
no-CBs CPUs use ->cblist is to take advantage of callback numbering,
which will reduce the effects of missed grace periods which in turn will
reduce forward-progress problems for no-CBs CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, rcu_segcblist_empty() assumes that the callback list is not
being changed by other CPUs, but upcoming changes will require it to
operate locklessly. This commit therefore adds the needed READ_ONCE()
call, along with the WRITE_ONCE() calls when updating the callback list's
->head field.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, rcu_segcblist_restempty() assumes that the callback list
is not being changed by other CPUs, but upcoming changes will require
it to operate locklessly. This commit therefore adds the needed
READ_ONCE() calls, along with the WRITE_ONCE() calls when updating
the callback list.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The idea behind the checks for extended quiescent states at the end of
__call_rcu_nocb() is to handle cases where call_rcu() is invoked directly
from within an extended quiescent state, for example, from the idle loop.
However, this will result in a timer-mediated deferred wakeup, which
will cause the needed wakeup to happen within a jiffy or thereabouts.
There should be no forward-progress concerns, and if there are, the proper
response is to exit the extended quiescent state while executing the
endless blast of call_rcu() invocations, for example, using RCU_NONIDLE().
Given the more realistic case of an isolated call_rcu() invocation, there
should be no problem.
This commit therefore removes the checks for invoking call_rcu() within
an extended quiescent state for on no-CBs CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
In theory, a timer is used to defer wakeups of no-CBs grace-period
kthreads when the wakeup cannot be done safely directly from the
call_rcu(). In practice, the one-jiffy delay is not always consistent
with timely callback invocation under heavy call_rcu() loads. Therefore,
there are a number of checks for a pending deferred wakeup, including
from the scheduling-clock interrupt. Unfortunately, this check follows
the rcu_nohz_full_cpu() early exit, which renders it useless on such CPUs.
This commit therefore moves the check for the pending deferred no-CB
wakeup to precede the rcu_nohz_full_cpu() early exit.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because rcutree_migrate_callbacks() is invoked infrequently and because
an exact snapshot of the grace-period state might save some callbacks a
second trip through a grace period, this function has used the root
rcu_node structure. However, this safe-second-trip optimization
happens only if rcutree_migrate_callbacks() races with grace-period
initialization, so it is not worth the added mental load. This commit
therefore makes rcutree_migrate_callbacks() start with the leaf rcu_node
structures, as is done elsewhere.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit is a preparatory patch for offloaded callbacks using the
same ->cblist structure used by non-offloaded callbacks. It therefore
adds rcu_segcblist_is_offloaded() calls where they will be needed when
!rcu_segcblist_is_enabled() no longer flags the offloaded case. It also
adds checks in rcu_do_batch() to ensure that there are no missed checks:
Currently, it should not be possible for offloaded execution to reach
rcu_do_batch(), though this will change later in this series.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
RCU callback processing currently uses rcu_is_nocb_cpu() to determine
whether or not the current CPU's callbacks are to be offloaded.
This works, but it is not so good for cache locality. Plus use of
->cblist for offloaded callbacks will greatly increase the frequency
of these checks. This commit therefore adds a ->offloaded flag to the
rcu_segcblist structure to provide a more flexible and cache-friendly
means of checking for callback offloading.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
NULLing the RCU_NEXT_TAIL pointer was a clever way to save a byte, but
forward-progress considerations would require that this pointer be both
NULL and non-NULL, which, absent a quantum-computer port of the Linux
kernel, simply won't happen. This commit therefore creates as separate
->enabled flag to replace the current NULL checks.
[ paulmck: Add include files per 0day test robot and -next. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit causes the no-CBs grace-period/callback hierarchy to be
printed to the console when the dump_tree kernel boot parameter is set.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit changes the name of the rcu_nocb_leader_stride kernel
boot parameter to rcu_nocb_gp_stride in order to account for the new
distinction between callback and grace-period no-CBs kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The nocb_cb_wait() function traces a "FollowerSleep" trace_rcu_nocb_wake()
event, which never was documented and is now misleading. This commit
therefore changes "FollowerSleep" to "CBSleep", documents this, and
updates the documentation for "Sleep" as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit renames rdp_leader to rdp_gp in order to account for the
new distinction between callback and grace-period no-CBs kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adjusts naming to account for the new distinction between
callback and grace-period no-CBs kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adjusts naming to account for the new distinction between
callback and grace-period no-CBs kthreads. While in the area, it also
updates local variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adjusts naming to account for the new distinction between
callback and grace-period no-CBs kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adjusts naming to account for the new distinction between
callback and grace-period no-CBs kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads
are divided into groups. The first rcuo kthread to come online in a
given group is that group's leader, and the leader both waits for grace
periods and invokes its CPU's callbacks. The non-leader rcuo kthreads
only invoke callbacks.
This works well in the real-time/embedded environments for which it was
intended because such environments tend not to generate all that many
callbacks. However, given huge floods of callbacks, it is possible for
the leader kthread to be stuck invoking callbacks while its followers
wait helplessly while their callbacks pile up. This is a good recipe
for an OOM, and rcutorture's new callback-flood capability does generate
such OOMs.
One strategy would be to wait until such OOMs start happening in
production, but similar OOMs have in fact happened starting in 2018.
It would therefore be wise to take a more proactive approach.
This commit therefore features per-CPU rcuo kthreads that do nothing
but invoke callbacks. Instead of having one of these kthreads act as
leader, each group has a separate rcog kthread that handles grace periods
for its group. Because these rcuog kthreads do not invoke callbacks,
callback floods on one CPU no longer block callbacks from reaching the
rcuc callback-invocation kthreads on other CPUs.
This change does introduce additional kthreads, however:
1. The number of additional kthreads is about the square root of
the number of CPUs, so that a 4096-CPU system would have only
about 64 additional kthreads. Note that recent changes
decreased the number of rcuo kthreads by a factor of two
(CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so
this still represents a significant improvement on most systems.
2. The leading "rcuo" of the rcuog kthreads should allow existing
scripting to affinity these additional kthreads as needed, the
same as for the rcuop and rcuos kthreads. (There are no longer
any rcuob kthreads.)
3. A state-machine approach was considered and rejected. Although
this would allow the rcuo kthreads to continue their dual
leader/follower roles, it complicates callback invocation
and makes it more difficult to consolidate rcuo callback
invocation with existing softirq callback invocation.
The introduction of rcuog kthreads should thus be acceptable.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit simply rewords comments to prepare for leader nocb kthreads
doing only grace-period work and callback shuffling. This will mean
the addition of replacement kthreads to invoke callbacks. The "leader"
and "follower" thus become less meaningful, so the commit changes no-CB
comments with these strings to "GP" and "CB", respectively. (Give or
take the usual grammatical transformations.)
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit simply renames rcu_data fields to prepare for leader
nocb kthreads doing only grace-period work and callback shuffling.
This will mean the addition of replacement kthreads to invoke callbacks.
The "leader" and "follower" thus become less meaningful, so the commit
changes no-CB fields with these strings to "gp" and "cb", respectively.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit fixes a spelling mistake in file tree_exp.h.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because rcu_expedited_nesting is initialized to 1 and not decremented
until just before init is spawned, rcu_expedited_nesting is guaranteed
to be non-zero whenever rcu_scheduler_active == RCU_SCHEDULER_INIT.
This commit therefore removes this redundant "if" equality test.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Scheduling-clock interrupts can arrive late in the CPU-offline process,
after idle entry and the subsequent call to cpuhp_report_idle_dead().
Once execution passes the call to rcu_report_dead(), RCU is ignoring
the CPU, which results in lockdep complaints when the interrupt handler
uses RCU:
------------------------------------------------------------------------
=============================
WARNING: suspicious RCU usage
5.2.0-rc1+ #681 Not tainted
-----------------------------
kernel/sched/fair.c:9542 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/5/0.
stack backtrace:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.2.0-rc1+ #681
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
dump_stack+0x5e/0x8b
trigger_load_balance+0xa8/0x390
? tick_sched_do_timer+0x60/0x60
update_process_times+0x3b/0x50
tick_sched_handle+0x2f/0x40
tick_sched_timer+0x32/0x70
__hrtimer_run_queues+0xd3/0x3b0
hrtimer_interrupt+0x11d/0x270
? sched_clock_local+0xc/0x74
smp_apic_timer_interrupt+0x79/0x200
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:delay_tsc+0x22/0x50
Code: ff 0f 1f 80 00 00 00 00 65 44 8b 05 18 a7 11 48 0f ae e8 0f 31 48 89 d6 48 c1 e6 20 48 09 c6 eb 0e f3 90 65 8b 05 fe a6 11 48 <41> 39 c0 75 18 0f ae e8 0f 31 48 c1 e2 20 48 09 c2 48 89 d0 48 29
RSP: 0000:ffff8f92c0157ed0 EFLAGS: 00000212 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000005 RBX: ffff8c861f356400 RCX: ffff8f92c0157e64
RDX: 000000321214c8cc RSI: 00000032120daa7f RDI: 0000000000260f15
RBP: 0000000000000005 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8c861ee18000 R15: ffff8c861ee18000
cpuhp_report_idle_dead+0x31/0x60
do_idle+0x1d5/0x200
? _raw_spin_unlock_irqrestore+0x2d/0x40
cpu_startup_entry+0x14/0x20
start_secondary+0x151/0x170
secondary_startup_64+0xa4/0xb0
------------------------------------------------------------------------
This happens rarely, but can be forced by happen more often by
placing delays in cpuhp_report_idle_dead() following the call to
rcu_report_dead(). With this in place, the following rcutorture
scenario reproduces the problem within a few minutes:
tools/testing/selftests/rcutorture/bin/kvm.sh --cpus 8 --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TREE04"
This commit uses the crude but effective expedient of moving the disabling
of interrupts within the idle loop to precede the cpu_is_offline()
check. It also invokes tick_nohz_idle_stop_tick() instead of
tick_nohz_idle_stop_tick_protected() to shut off the scheduling-clock
interrupt.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
[ paulmck: Revert tick_nohz_idle_stop_tick_protected() removal, new callers. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adds RCU-reader checks to list_for_each_entry_rcu() and
hlist_for_each_entry_rcu(). These checks are optional, and are indicated
by a lockdep expression passed to a new optional argument to these two
macros. If this optional lockdep expression is omitted, these two macros
act as before, checking for an RCU read-side critical section.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Update to eliminate return within macro and update comment. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The more aggressive forward-progress tests can interfere with rcutorture
shutdown, resulting in false-positive diagnostics. This commit therefore
ends any such tests 30 seconds prior to shutdown.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
It is possible that the rcuperf kernel test runs concurrently with init
starting up. During this time, the system is running all grace periods
as expedited. However, rcuperf can also be run for normal GP tests.
Right now, it depends on a holdoff time before starting the test to
ensure grace periods start later. This works fine with the default
holdoff time however it is not robust in situations where init takes
greater than the holdoff time to finish running. Or, as in my case:
I modified the rcuperf test locally to also run a thread that did
preempt disable/enable in a loop. This had the effect of slowing down
init. The end result was that the "batches:" counter in rcuperf was 0
causing a division by 0 error in the results. This counter was 0 because
only expedited GPs seem to happen, not normal ones which led to the
rcu_state.gp_seq counter remaining constant across grace periods which
unexpectedly happen to be expedited. The system was running expedited
RCU all the time because rcu_unexpedited_gp() would not have run yet
from init. In other words, the test would concurrently with init
booting in expedited GP mode.
To fix this properly, this commit waits until system_state is set to
SYSTEM_RUNNING before starting the test. This change is made just
before kernel_init() invokes rcu_end_inkernel_boot(), and this latter
is what turns off boot-time expediting of RCU grace periods.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The functions torture_onoff_cleanup() and torture_shuffle_cleanup()
are declared static and marked EXPORT_SYMBOL_GPL(), which is at best an
odd combination. Because these functions are not used outside of the
kernel/torture.c file they are defined in, this commit removes their
EXPORT_SYMBOL_GPL() marking.
Fixes: cc47ae0830 ("rcutorture: Abstract torture-test cleanup")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
During an actual call_rcu() flood, there would be frequent trips to
userspace (in-kernel call_rcu() floods must be otherwise housebroken).
Userspace execution allows a great many things to interrupt execution,
and rcutorture needs to also allow such interruptions. This commit
therefore causes call_rcu() floods to occasionally invoke schedule(),
thus preventing spurious rcutorture failures due to other parts of the
kernel becoming irate at the call_rcu() flood events.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_bh rcuperf type was removed by commit 620d246065cd("rcuperf:
Remove the "rcu_bh" and "sched" torture types"), but it lives on in the
MODULE_PARM_DESC() of perf_type. This commit therefore changes that
module-parameter description to substitute srcu for rcu_bh.
Signed-off-by: Xiao Yang <ice_yangxiao@163.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The debug_locks flag can never be true at the end of
rcu_read_lock_sched_held() because it is already checked by the earlier
call todebug_lockdep_rcu_enabled(). This commit therefore removes this
redundant check.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_dereference_raw_notrace() API name is confusing. It is equivalent
to rcu_dereference_raw() except that it also does sparse pointer checking.
There are only a few users of rcu_dereference_raw_notrace(). This patches
renames all of them to be rcu_dereference_raw_check() with the "_check()"
indicating sparse checking.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Fix checkpatch warnings about parentheses. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The return value of rcu_spawn_one_boost_kthread() is not used any longer.
This commit therefore changes its return type from int to void, and
removes the cast to void from its callers.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because pointer output is now obfuscated, and because what you really
want to know is whether or not the callback lists are empty, this commit
replaces the srcu_data structure's head callback pointer printout with
a single character that is "." is the callback list is empty or "C"
otherwise.
This is the only remaining user of rcu_segcblist_head(), so this
commit also removes this function's definition. It also turns out that
rcu_segcblist_tail() no longer has any callers, so this commit removes
that function's definition while in the area. They were both marked
"Interim", and their end has come.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The synchronize_rcu_expedited() function has an INIT_WORK_ONSTACK(),
but lacks the corresponding destroy_work_on_stack(). This commit
therefore adds destroy_work_on_stack().
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
This commit adds a rcu_cpu_stall_ftrace_dump kernel boot parameter, that,
when set, causes the trace buffer to be dumped after an RCU CPU stall
warning is printed. This kernel boot parameter is disabled by default,
maintaining compatibility with previous behavior.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Commit bb73c52bad ("rcu: Don't disable preemption for Tiny and Tree
RCU readers") removed the barrier() calls from rcu_read_lock() and
rcu_write_lock() in CONFIG_PREEMPT=n&&CONFIG_PREEMPT_COUNT=n kernels.
Within RCU, this commit was OK, but it failed to account for things like
get_user() that can pagefault and that can be reordered by the compiler.
Lack of the barrier() calls in rcu_read_lock() and rcu_read_unlock()
can cause these page faults to migrate into RCU read-side critical
sections, which in CONFIG_PREEMPT=n kernels could result in too-short
grace periods and arbitrary misbehavior. Please see commit 386afc9114
("spinlocks and preemption points need to be at least compiler barriers")
and Linus's commit 66be4e66a7 ("rcu: locking and unlocking need to
always be at least barriers"), this last of which restores the barrier()
call to both rcu_read_lock() and rcu_read_unlock().
This commit removes barrier() calls that are no longer needed given that
the addition of them in Linus's commit noted above. The combination of
this commit and Linus's commit effectively reverts commit bb73c52bad
("rcu: Don't disable preemption for Tiny and Tree RCU readers").
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix embarrassing typo located by Alan Stern. ]
The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:
------------------------------------------------------------------------
================================
WARNING: inconsistent lock state
5.2.0-rc1+ #513 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0xb0/0x1c0
_raw_spin_lock_irqsave+0x3c/0x50
tick_broadcast_switch_to_oneshot+0xd/0x40
tick_switch_to_oneshot+0x4f/0xd0
hrtimer_run_queues+0xf3/0x130
run_local_timers+0x1c/0x50
update_process_times+0x1c/0x50
tick_periodic+0x26/0xc0
tick_handle_periodic+0x1a/0x60
smp_apic_timer_interrupt+0x80/0x2a0
apic_timer_interrupt+0xf/0x20
_raw_spin_unlock_irqrestore+0x4e/0x60
rcu_nocb_gp_kthread+0x15d/0x590
kthread+0xf3/0x130
ret_from_fork+0x3a/0x50
irq event stamp: 171
hardirqs last enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(tick_broadcast_lock);
<Interrupt>
lock(tick_broadcast_lock);
*** DEADLOCK ***
1 lock held by migration/1/14:
#0: (____ptrval____) (clockevents_lock){+.+.}, at: tick_offline_cpu+0xf/0x30
stack backtrace:
CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.2.0-rc1+ #513
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x5e/0x8b
print_usage_bug+0x1fc/0x216
? print_shortest_lock_dependencies+0x1b0/0x1b0
mark_lock+0x1f2/0x280
__lock_acquire+0x1e0/0x18f0
? __lock_acquire+0x21b/0x18f0
? _raw_spin_unlock_irqrestore+0x4e/0x60
lock_acquire+0xb0/0x1c0
? tick_broadcast_offline+0xf/0x70
_raw_spin_lock+0x33/0x40
? tick_broadcast_offline+0xf/0x70
tick_broadcast_offline+0xf/0x70
tick_offline_cpu+0x16/0x30
take_cpu_down+0x7d/0xa0
multi_cpu_stop+0xa2/0xe0
? cpu_stop_queue_work+0xc0/0xc0
cpu_stopper_thread+0x6d/0x100
smpboot_thread_fn+0x169/0x240
kthread+0xf3/0x130
? sort_range+0x20/0x20
? kthread_cancel_delayed_work_sync+0x10/0x10
ret_from_fork+0x3a/0x50
------------------------------------------------------------------------
To reproduce, run the following rcutorture test:
tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"
It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline(). This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.
Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop(). Which in turn
had irqs enabled after return from cancel_delayed_work_sync(). Which is a
wrapper around __cancel_work_timer(). Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.
Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop(): The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.
This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop(). Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself. A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so). The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Security is a wonderful thing, but so is the ability to debug based on
lockdep warnings. This commit therefore makes lockdep lock addresses
visible in the clear.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because __rcu_read_unlock() can be preempted just before the call to
rcu_read_unlock_special(), it is possible for a task to be preempted just
before it would have fully exited its RCU read-side critical section.
This would result in a needless extension of that critical section until
that task was resumed, which might in turn result in a needlessly
long grace period, needless RCU priority boosting, and needless
force-quiescent-state actions. Therefore, rcu_note_context_switch()
invokes __rcu_read_unlock() followed by rcu_preempt_deferred_qs() when
it detects this situation. This action by rcu_note_context_switch()
ends the RCU read-side critical section immediately.
Of course, once the task resumes, it will invoke rcu_read_unlock_special()
redundantly. This is harmless because the fact that a preemption
happened means that interrupts, preemption, and softirqs cannot
have been disabled, so there would be no deferred quiescent state.
While ->rcu_read_lock_nesting remains less than zero, none of the
->rcu_read_unlock_special.b bits can be set, and they were all zeroed by
the call to rcu_note_context_switch() at task-preemption time. Therefore,
setting ->rcu_read_unlock_special.b.exp_hint to false has no effect.
Therefore, the extra call to rcu_preempt_deferred_qs_irqrestore()
would return immediately. With one possible exception, which is
if an expedited grace period started just as the task was being
resumed, which could leave ->exp_deferred_qs set. This will cause
rcu_preempt_deferred_qs_irqrestore() to invoke rcu_report_exp_rdp(),
reporting the quiescent state, just as it should. (Such an expedited
grace period won't affect the preemption code path due to interrupts
having already been disabled.)
But when rcu_note_context_switch() invokes __rcu_read_unlock(), it
is doing so with preemption disabled, hence __rcu_read_unlock() will
unconditionally defer the quiescent state, only to immediately invoke
rcu_preempt_deferred_qs(), thus immediately reporting the deferred
quiescent state. It turns out to be safe (and faster) to instead
just invoke rcu_preempt_deferred_qs() without the __rcu_read_unlock()
middleman.
Because this is the invocation during the preemption (as opposed to
the invocation just after the resume), at least one of the bits in
->rcu_read_unlock_special.b must be set and ->rcu_read_lock_nesting
must be negative. This means that rcu_preempt_need_deferred_qs() must
return true, avoiding the early exit from rcu_preempt_deferred_qs().
Thus, rcu_preempt_deferred_qs_irqrestore() will be invoked immediately,
as required.
This commit therefore simplifies the CONFIG_PREEMPT=y version of
rcu_note_context_switch() by removing the "else if" branch of its
"if" statement. This change means that all callers that would have
invoked rcu_read_unlock_special() followed by rcu_preempt_deferred_qs()
will now simply invoke rcu_preempt_deferred_qs(), thus avoiding the
rcu_read_unlock_special() middleman when __rcu_read_unlock() is preempted.
Cc: rcu@vger.kernel.org
Cc: kernel-team@android.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Threaded interrupts provide additional interesting interactions between
RCU and raise_softirq() that can result in self-deadlocks in v5.0-2 of
the Linux kernel. These self-deadlocks can be provoked in susceptible
kernels within a few minutes using the following rcutorture command on
an 8-CPU system:
tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --configs "TREE03" --bootargs "threadirqs"
Although post-v5.2 RCU commits have at least greatly reduced the
probability of these self-deadlocks, this was entirely by accident.
Although this sort of accident should be rowdily celebrated on those
rare occasions when it does occur, such celebrations should be quickly
followed by a principled patch, which is what this patch purports to be.
The key point behind this patch is that when in_interrupt() returns
true, __raise_softirq_irqoff() will never attempt a wakeup. Therefore,
if in_interrupt(), calls to raise_softirq*() are both safe and
extremely cheap.
This commit therefore replaces the in_irq() calls in the "if" statement
in rcu_read_unlock_special() with in_interrupt() and simplifies the
"if" condition to the following:
if (irqs_were_disabled && use_softirq &&
(in_interrupt() ||
(exp && !t->rcu_read_unlock_special.b.deferred_qs))) {
raise_softirq_irqoff(RCU_SOFTIRQ);
} else {
/* Appeal to the scheduler. */
}
The rationale behind the "if" condition is as follows:
1. irqs_were_disabled: If interrupts are enabled, we should
instead appeal to the scheduler so as to let the upcoming
irq_enable()/local_bh_enable() do the rescheduling for us.
2. use_softirq: If this kernel isn't using softirq, then
raise_softirq_irqoff() will be unhelpful.
3. a. in_interrupt(): If this returns true, the subsequent
call to raise_softirq_irqoff() is guaranteed not to
do a wakeup, so that call will be both very cheap and
quite safe.
b. Otherwise, if !in_interrupt() the raise_softirq_irqoff()
might do a wakeup, which is expensive and, in some
contexts, unsafe.
i. The "exp" (an expedited RCU grace period is being
blocked) says that the wakeup is worthwhile, and:
ii. The !.deferred_qs says that scheduler locks
cannot be held, so the wakeup will be safe.
Backporting this requires considerable care, so no auto-backport, please!
Fixes: 05f415715c ("rcu: Speed up expedited GPs when interrupting RCU reader")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
In !use_softirq runs, we clearly cannot rely on raise_softirq() and
its lightweight bit setting, so we must instead do some form of wakeup.
In the absence of a self-IPI when interrupts are disabled, these wakeups
can be delayed until the next interrupt occurs. This means that calling
invoke_rcu_core() doesn't actually do any expediting.
In this case, it is better to take the "else" clause, which sets the
current CPU's resched bits and, if there is an expedited grace period
in flight, uses IRQ-work to force the needed self-IPI. This commit
therefore removes the "else if" clause that calls invoke_rcu_core().
Reported-by: Scott Wood <swood@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for the fair scheduling class:
- Prevent freeing memory which is accessible by concurrent readers
- Make the RCU annotations for numa groups consistent"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use RCU accessors consistently for ->numa_group
sched/fair: Don't free p->numa_faults with concurrent readers
Pull perf fixes from Thomas Gleixner:
"A pile of perf related fixes:
Kernel:
- Fix SLOTS PEBS event constraints for Icelake CPUs
- Add the missing mask bit to allow counting hardware generated
prefetches on L3 for Icelake CPUs
- Make the test for hypervisor platforms more accurate (as far as
possible)
- Handle PMUs correctly which override event->cpu
- Yet another missing fallthrough annotation
Tools:
perf.data:
- Fix loading of compressed data split across adjacent records
- Fix buffer size setting for processing CPU topology perf.data
header.
perf stat:
- Fix segfault for event group in repeat mode
- Always separate "stalled cycles per insn" line, it was being
appended to the "instructions" line.
perf script:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Mark expected switch fall-throughs
perf/core: Fix creating kernel counters for PMUs that override event->cpu
perf/x86: Apply more accurate check on hypervisor platform
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
perf/x86/intel: Fix SLOTS PEBS event constraint
perf build: Do not use -Wshadow on gcc < 4.8
perf probe: Avoid calling freeing routine multiple times for same pointer
perf probe: Set pev->nargs to zero after freeing pev->args entries
perf session: Fix loading of compressed data split across adjacent records
perf stat: Always separate stalled cycles per insn
perf stat: Fix segfault for event group in repeat mode
perf tools: Fix proper buffer size for feature processing
perf script: Fix off by one in brstackinsn IPC computation
perf script: Improve man page description of metrics
perf script: Fix --max-blocks man page description
