The current lockd does not reject reclaims that arrive outside of the
grace period.
Accepting a reclaim means promising to the client that no conflicting
locks were granted since last it held the lock. We can meet that
promise if we assume the only lockers are nfs clients, and that they are
sufficiently well-behaved to reclaim only locks that they held before,
and that only reclaim locks have been permitted so far. Once we leave
the grace period (and start permitting non-reclaims), we can no longer
keep that promise. So we must start rejecting reclaims at that point.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Do all the grace period checks in svclock.c. This simplifies the code a
bit, and will ease some later changes.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rewrite grace period code to unify management of grace period across
lockd and nfsd. The current code has lockd and nfsd cooperate to
compute a grace period which is satisfactory to them both, and then
individually enforce it. This creates a slight race condition, since
the enforcement is not coordinated. It's also more complicated than
necessary.
Here instead we have lockd and nfsd each inform common code when they
enter the grace period, and when they're ready to leave the grace
period, and allow normal locking only after both of them are ready to
leave.
We also expect the locks_start_grace()/locks_end_grace() interface here
to be simpler to build on for future cluster/high-availability work,
which may require (for example) putting individual filesystems into
grace, or enforcing grace periods across multiple cluster nodes.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The previous patch db203d53d4 ("mm:
tiny-shmem fix lock ordering: mmap_sem vs i_mutex") to fix the lock
ordering in tiny-shmem breaks shared anonymous and IPC memory on NOMMU
architectures because it was using the expanding truncate to signal ramfs
to allocate a physically contiguous RAM backing the inode (otherwise it is
unusable for "memory mapping" it to userspace).
However do_truncate is what caused the lock ordering error, due to it
taking i_mutex. In this case, we can actually just call ramfs directly to
allocate memory for the mapping, rather than go via truncate.
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
since commit ff7d9756b5
"nfsd: use static memory for callback program and stats"
do_probe_callback uses a static callback program
(NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog
as passed in by the client in setclientid (4.0)
or create_session (4.1).
This patches introduces rpc_create_args.prognumber that allows
overriding program->number when creating rpc_clnt.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that cb_stats are static (since commit
ff7d9756b5)
there's no need to clear them.
Initially I thought it might make sense to do
that every callback probing but since the stats
are per-program and they are shared between possibly
several client callback instances, zeroing them out
seems like the wrong thing to do.
Note that that commit also introduced a bug
since stats.program is also being cleared in the process
and it is not restored after the memset as it used to be.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Having two separate functions doesn't add clarity, so
eliminate one of them. Use contemporary kernel coding conventions
where appropriate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Adopt an approach similar to the RPC server's auth cache (from Aurelien
Charbon and Brian Haley).
Note nlm_lookup_host()'s existing IP address hash function has the same
issue with correctness on little-endian systems as the original IPv4 auth
cache hash function, so I've also updated it with a hash function similar
to the new auth cache hash function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Update the nlm_cmp_addr() helper to support AF_INET6 as well as AF_INET
addresses. New version takes two "struct sockaddr *" arguments instead of
"struct sockaddr_in *" arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To store larger addresses in the nsm_handle structure, make sm_addr a
sockaddr_storage.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To store larger addresses in the nlm_host structure, make h_saddr a
sockaddr_storage. And let's call it something more self-explanatory:
"saddr" could easily be mistaken for "server address".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To store larger addresses in the nlm_host structure, make h_addr a
sockaddr_storage, and add an address length field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make sure an address family is specified for source addresses passed to
nlm_lookup_host(). nlm_lookup_host() will need this when it becomes
capable of dealing with AF_INET6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Knowing which source address is used for communicating with remote NLM
services can be helpful for debugging configuration problems on hosts
with multiple addresses.
Keep the dprintk debugging here, but adapt it so it displays AF_INET6
addresses properly. There are also a couple of dprintk clean-ups as
well.
At some point we will aggregate the helpers that display presentation
format addresses into a single set of shared helpers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We're about to introduce some extra debugging messages in nlm_lookup_host().
Bring the coding style up to date first so we can cleanly introduce the new
debugging messages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In order to advertise NFS-related services on IPv6 interfaces via
rpcbind, the kernel RPC server implementation must use
rpcb_v4_register() instead of rpcb_register().
A new kernel build option allows distributions to use the legacy
v2 call until they integrate an appropriate user-space rpcbind
daemon that can support IPv6 RPC services.
I tried adding some automatic logic to fall back if registering
with a v4 protocol request failed, but there are too many corner
cases. So I just made it a compile-time switch that distributions
can throw when they've replaced portmapper with rpcbind.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
End lockd's grace period using schedule_delayed_work() instead of a
check on every pass through the main loop.
After a later patch, we'll depend on lockd to end its grace period even
if it's not currently handling requests; so it shouldn't depend on being
woken up from the main loop to do so.
Also, Nakano Hiroaki (who independently produced a similar patch)
noticed that the current behavior is buggy in the face of jiffies
wraparound:
"lockd uses time_before() to determine whether the grace period
has expired. This would seem to be enough to avoid timer
wrap-around issues, but, unfortunately, that is not the case.
The time_* family of comparison functions can be safely used to
compare jiffies relatively close in time, but they stop working
after approximately LONG_MAX/2 ticks. nfsd can suffer this
problem because the time_before() comparison in lockd() is not
performed until the first request comes in, which means that if
there is no lockd traffic for more than LONG_MAX/2 ticks we are
screwed.
"The implication of this is that once time_before() starts
misbehaving any attempt from a NFS client to execute fcntl()
will be received with a NLM_LCK_DENIED_GRACE_PERIOD message for
25 days (assuming HZ=1000). In other words, the 50 seconds grace
period could turn into a grace period of 50 days or more.
"Note: This bug was analyzed independently by Oda-san
<oda@valinux.co.jp> and myself."
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Nakano Hiroaki <nakano.hiroaki@oss.ntt.co.jp>
Cc: Itsuro Oda <oda@valinux.co.jp>
The check here is currently harmless but unnecessary, since, as the
comment notes, there aren't any blocked-lock callbacks to process
during the grace period anyway.
And eventually we want to allow multiple grace periods that come and go
for different filesystems over the course of the lifetime of lockd, at
which point this check is just going to get in the way.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I had a report from someone building a large NFS server that they were
unable to start more than 585 nfsd threads. It was reported against an
older kernel using the slab allocator, and I tracked it down to the
large allocation in nfsd_racache_init failing.
It appears that the slub allocator handles large allocations better,
but large contiguous allocations can often be problematic. There
doesn't seem to be any reason that the racache has to be allocated as a
single large chunk. This patch breaks this up so that the racache is
built up from separate allocations.
(Thanks also to Takashi Iwai for a bugfix.)
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Takashi Iwai <tiwai@suse.de>
After using the encode_stateid helper the "p" pointer declared
by ENCODE_SEQID_OP_HEAD is warned as unused.
In the single site where it is still needed it can be declared
separately using the ENCODE_HEAD macro.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfsd4_encode_open first reservation is currently for 36 + sizeof(stateid_t)
while it writes after the stateid a cinfo (20 bytes) and 5 more 4-bytes
words, for a total of 40 + sizeof(stateid_t).
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch adds the CONFIG_FILE_LOCKING option which allows to remove
support for advisory locks. With this patch enabled, the flock()
system call, the F_GETLK, F_SETLK and F_SETLKW operations of fcntl()
and NFS support are disabled. These features are not necessarly needed
on embedded systems. It allows to save ~11 Kb of kernel code and data:
text data bss dec hex filename
1125436 118764 212992 1457192 163c28 vmlinux.old
1114299 118564 212992 1445855 160fdf vmlinux
-11137 -200 0 -11337 -2C49 +/-
This patch has originally been written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: matthew@wil.cx
Cc: linux-fsdevel@vger.kernel.org
Cc: mpm@selenic.com
Cc: akpm@linux-foundation.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
RFC 2623 section 2.3.2 permits the server to bypass gss authentication
checks for certain operations that a client may perform when mounting.
In the case of a client that doesn't have some form of credentials
available to it on boot, this allows it to perform the mount unattended.
(Presumably real file access won't be needed until a user with
credentials logs in.)
Being slightly more lenient allows lots of old clients to access
krb5-only exports, with the only loss being a small amount of
information leaked about the root directory of the export.
This affects only v2 and v3; v4 still requires authentication for all
access.
Thanks to Peter Staubach testing against a Solaris client, which
suggesting addition of v3 getattr, to the list, and to Trond for noting
that doing so exposes no additional information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Introduce and initialize an address family field in the svc_serv structure.
This field will determine what family to use for the service's listener
sockets and what families are advertised via the local rpcbind daemon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's a race between mm->owner assignment and swapoff, more easily
seen when task slab poisoning is turned on. The condition occurs when
try_to_unuse() runs in parallel with an exiting task. A similar race
can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats>
or ptrace or page migration.
CPU0 CPU1
try_to_unuse
looks at mm = task0->mm
increments mm->mm_users
task 0 exits
mm->owner needs to be updated, but no
new owner is found (mm_users > 1, but
no other task has task->mm = task0->mm)
mm_update_next_owner() leaves
mmput(mm) decrements mm->mm_users
task0 freed
dereferencing mm->owner fails
The fix is to notify the subsystem via mm_owner_changed callback(),
if no new owner is found, by specifying the new task as NULL.
Jiri Slaby:
mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but
must be set after that, so as not to pass NULL as old owner causing oops.
Daisuke Nishimura:
mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task()
and its callers need to take account of this situation to avoid oops.
Hugh Dickins:
Lockdep warning and hang below exec_mmap() when testing these patches.
exit_mm() up_reads mmap_sem before calling mm_update_next_owner(),
so exec_mmap() now needs to do the same. And with that repositioning,
there's now no point in mm_need_new_owner() allowing for NULL mm.
Reported-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The VFS interface for the 'd_compare()' is a bit special (read: 'odd'),
because it really just essentially replaces a memcmp(). The filesystem
is supposed to just compare the two names with whatever case-independent
or other function.
And when I say 'is supposed to', I obviously mean that 'procfs does odd
things, and actually looks at the dentry that we don't even pass down,
rather than just the name'. Which results in problems, because we
actually call d_compare before we have even verified that the dentry is
still hashed at all.
And that causes a problm since the inode that procfs looks at may have
been free'd and the d_inode pointer is NULL. procfs just assumes that
all dentries are positive, since procfs itself never generates a
negative one. But memory pressure will still result in the dentry
getting torn down, and as it is removed by RCU, it still remains visible
on some lists - and to d_compare.
If the filesystem just did a name comparison, we wouldn't care. And we
could just fix procfs to know about negative dentries too. But rather
than have the low-level filesystems know about internal VFS details,
just move the check for a unhashed dentry up a bit, so that we will only
call d_compare on dentries that are still active.
The actual oops this caused didn't look like a NULL pointer dereference
because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)'
to get at its internal proc_inode information from the inode pointer,
and accessed a field below the inode. So the oops would look something
like
BUG: unable to handle kernel paging request at fffffffffffffff0
IP: [<ffffffff802bc6c6>] proc_sys_compare+0x36/0x50
and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and
ppc64 (Hugh Dickins).
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6:
UBIFS: fix printk format warnings
UBIFS: remove incorrect assert
UBIFS: TNC / GC race fixes
UBIFS: create the name of the background thread in every case
This patch adds barrier support to GFS2. There is not a lot of change
really... we just add the barrier flag when we write journal header
blocks. If the underlying device refuses to support them, we fall back
to the previous way of doing things (wait for the I/O and hope) since
there is nothing else we can do. There is no user configuration,
barriers will always be on unless the device refuses to support them.
This seems a reasonable solution to me since this is a correctness
issue.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Yet another bug was found in xfs_iext_irec_compact_full() and while the
source of the bug was found it wasn't an easy task to track it down
because the conditions are very difficult to reproduce.
A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their
significant effort in tracking down the source of this corruption.
xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost
identical - they both compact indirect extent lists by moving extents from
subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only
moves extents if all of the extents in the next buffer will fit into the
empty space in the buffer before it. xfs_iext_irec_compact_full() will go
a step further and move part of the next buffer if all the extents wont
fit. It will then shift the remaining extents in the next buffer up to the
start of the buffer. The bug here was that we did not update er_extoff and
this caused extent list corruption.
It does not appear that this extra functionality gains us much. Calling
xfs_iext_irec_compact_pages() instead will do a good enough job at
compacting the indirect list and will be quicker too.
For the case in xfs_iext_indirect_to_direct() the total number of extents
in the indirect list will fit into one buffer so we will never need the
extra functionality of xfs_iext_irec_compact_full() there.
Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the
buffers will never overlap) so we don't want the performance hit that can
incur.
SGI-PV: 987159
SGI-Modid: xfs-linux-melb:xfs-kern:32166a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
If we don't move all the records from the next buffer into the current
buffer then we need to update the er_extoff field of the next buffer as we
shift the remaining records to the start of the buffer.
SGI-PV: 987159
SGI-Modid: xfs-linux-melb:xfs-kern:32165a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Russell Cattelan <cattelan@thebarn.com>
In case of error, the function p9_client_walk returns an ERR pointer, but
never returns a NULL pointer. So a NULL test that comes after an IS_ERR
test should be deleted.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = p9_client_walk(...)
... when != x = E
* if (x != NULL)
S1 else S2
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cifs: explicitly revoke SPNEGO key after session setup
The SPNEGO blob returned by an upcall can only be used once. Explicitly
revoke it to make sure that we never pick it up again after session
setup exits.
This doesn't seem to be that big an issue on more recent kernels, but
older kernels seem to link keys into the session keyring by default.
That said, explicitly revoking the key seems like a reasonable thing
to do here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: Convert cifs to new aops.
This patch is based on the one originally posted by Nick Piggin. His
patch was very close, but had a couple of small bugs. Nick's original
comments follow:
This is another relatively naive conversion. Always do the read upfront
when the page is not uptodate (unless we're in the writethrough path).
Fix an uninitialized data exposure where SetPageUptodate was called
before the page was uptodate.
SetPageUptodate and switch to writeback mode in the case that the full
page was dirtied.
Acked-by: Shaggy <shaggy@austin.ibm.com>
Acked-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIle
The rename destination isn't supposed to be null terminated. Also,
change the name string arg to be const.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: work around samba returning -ENOENT on SetFileDisposition call
Samba seems to return STATUS_OBJECT_NAME_NOT_FOUND when we try to set
the delete on close bit after doing a rename by filehandle. This looks
like a samba bug to me, but a lot of servers will do this. For now,
pretend an -ENOENT return is a success.
Samba does however seem to respect the CREATE_DELETE_ON_CLOSE bit
when opening files that already exist. Windows will ignore it, but
so adding it to the open flags should be harmless.
We're also currently ignoring the return code on the rename by
filehandle, so no need to set rc based on it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Previously mballoc created a separate set of functions for each proc
file. This combines the tunables into a single set of functions which
gets used for all of the per-superblock proc files, saving
approximately 2k of compiled object code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're given the datalen in the downcall, so there's no need to do any
calls to strlen(). Just keep track of the datalen in the key. Finally,
add a sanity check of the data in the downcall to make sure that it
looks like a real IP address.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Break out the code that does the actual renaming into a separate
function and have cifs_rename call that. That function will attempt a
path based rename first and then do a filehandle based one if it looks
like the source is busy.
The existing logic tried a path based rename first, but if we needed to
remove the destination then it only attempted a filehandle based rename
afterward. Not all servers support renaming by filehandle, so we need to
always attempt path rename first and fall back to filehandle rename if
it doesn't work.
This also fixes renames of open files on windows servers (at least when
the source and destination directories are the same).
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: add function to set file disposition
The proper way to set the delete on close bit on an already existing
file is to use SET_FILE_INFO with an infolevel of
SMB_FILE_DISPOSITION_INFO. Add a function to do that and have the
silly-rename code use it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: move rename and delete-on-close logic into helper function
When a file is still open on the server, we attempt to set the
DELETE_ON_CLOSE bit and rename it to a new filename. When the
last opener closes the file, the server should delete it.
This patch moves this mechanism into a helper function and has
the two places in cifs_unlink that do this procedure call it. It
also fixes the open flags to be correct.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...and into the core setup/teardown code in fs/ext4/super.c so that
other parts of ext4 can define tuning parameters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the CIFS client goes to write out pages, it needs to pick a
filehandle to write to. find_writeable_file however just picks the
first filehandle that it finds. This can cause problems when a lock
is issued against a particular filehandle and we pick a different
filehandle to write to.
This patch tries to avert this situation by having find_writable_file
prefer filehandles that have a pid that matches the current task.
This seems to fix lock test 11 from the connectathon test suite when
run against a windows server.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
GFP_KERNEL and GFP_NOFS are mutually exclusive. If you combine them, you end up
with plain GFP_KERNEL which can deadlock in cases where you really want
GFP_NOFS.
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This is a port of a patch from Linus which fixes a 200+ byte stack
usage problem in ext4_get_parent().
It's more efficient to pass down only the actual parts of the dentry
that matter: the parent inode and the name, instead of allocating a
struct dentry on the stack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Until now, we've used the same scheme as GFS1 for atime. This has failed
since atime is a per vfsmnt flag, not a per fs flag and as such the
"noatime" flag was not getting passed down to the filesystems. This
patch removes all the "special casing" around atime updates and we
simply use the VFS's atime code.
The net result is that GFS2 will now support all the same atime related
mount options of any other filesystem on a per-vfsmnt basis. We do lose
the "lazy atime" updates, but we gain "relatime". We could add lazy
atime to the VFS at a later date, if there is a requirement for that
variant still - I suspect relatime will be enough.
Also we lose about 100 lines of code after this patch has been applied,
and I have a suspicion that it will speed things up a bit, even when
atime is "on". So it seems like a nice clean up as well.
From a user perspective, everything stays the same except the loss of
the per-fs atime quantum tweekable (ought to be per-vfsmnt at the very
least, and to be honest I don't think anybody ever used it) and that a
number of options which were ignored before now work correctly.
Please let me know if you've got any comments. I'm pushing this out
early so that you can all see what my plans are.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch shrinks the gfs2_args structure which is embedded in
every GFS2 superblock. It cuts down the size of the options to a single
unsigned int (the 13 bits of bitfields will be rounded up to that size
by the compiler) from the current 11 unsigned ints. So on x86 thats 44
bytes shrinking to 4 bytes, in each and every GFS2 superblock.
Signed-off-by: Steven Whitehouse <swhitho@redhat.com>
fs/ubifs/dir.c:428: warning: format '%llu' expects type 'long long
unsigned int', but argument 5 has type 'long unsigned int'
fs/ubifs/debug.c:541: warning: format '%llu' expects type 'long long
unsigned int', but argument 2 has type 'long unsigned int'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The assert was not valid because one of the variables
'taken_empty_lebs' has transient values out of sync
with the other variables.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
- update GC sequence number if any nodes may have been moved
even if GC did not finish the LEB
- don't ignore error return when reading
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
If the ubifs partition is mounted RO and then remounted RW we end
up with no thread name in ubifs_remount_rw() and the thread appears
nameless.
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When unreserving space with boundaries that are not block aligned we round
up the start and round down the end boundaries and then use this function,
xfs_zero_remaining_bytes(), to zero the parts of the blocks that got
dropped during the rounding. The problem is we don't consider if these
blocks are beyond eof. Worse still is if we encounter delayed allocations
beyond eof we will try to use the magic delayed allocation block number as
a real block number. If the file size is ever extended to expose these
blocks then we'll go through xfs_zero_eof() to zero them anyway.
SGI-PV: 983683
SGI-Modid: xfs-linux-melb:xfs-kern:32055a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
We have a use-after-free issue where log completions access buffers via
the buffer log item and the buffer has already been freed. Fix this by
taking a reference on the buffer when attaching the buffer log item and
release the hold when the buffer log item is detached and we no longer
need the buffer. Also create a new function xfs_buf_item_free() to combine
some common code.
SGI-PV: 985757
SGI-Modid: xfs-linux-melb:xfs-kern:32025a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
If we call xfs_lock_two_inodes() to grab both the iolock and the ilock,
then drop the ilocks on both inodes, then grab them again (as
xfs_swap_extents() does) then lockdep will report a locking order problem.
This is a false positive.
To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks
at once - force calers to make two separate calls. This means that nested
dropping and regaining of the ilocks will retain the same lockdep subclass
and so lockdep will not see anything wrong with this code.
SGI-PV: 986238
SGI-Modid: xfs-linux-melb:xfs-kern:31999a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The current code in xlog_iodone() uses the wrong macro to check if the
barrier has been cleared due to an EOPNOTSUPP error form the lower layer.
SGI-PV: 986143
SGI-Modid: xfs-linux-melb:xfs-kern:31984a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With the help from some tracing I found that we try to map extents beyond
eof when doing a direct I/O read. It appears that the way to inform the
generic direct I/O path (ie do_direct_IO()) that we have breached eof is
to return an unmapped buffer from xfs_get_blocks_direct(). This will cause
do_direct_IO() to jump to the hole handling code where is will check for
eof and then abort.
This problem was found because a direct I/O read was trying to map beyond
eof and was encountering delayed allocations. The delayed allocations
beyond eof are speculative allocations and they didn't get converted when
the direct I/O flushed the file because there was only enough space in the
current AG to convert and write out the dirty pages within eof. Note that
xfs_iomap_write_allocate() wont necessarily convert all the delayed
allocation passed to it - it will return after allocating the first extent
- so if the delayed allocation extends beyond eof then it will stay that
way.
SGI-PV: 983683
SGI-Modid: xfs-linux-melb:xfs-kern:31929a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Logically we would return an error in xfs_fs_remount code to prevent users
from believing they might have changed mount options using remount which
can't be changed.
But unfortunately mount(8) adds all options from mtab and fstab to the
mount arguments in some cases so we can't blindly reject options, but have
to check for each specified option if it actually differs from the
currently set option and only reject it if that's the case.
Until that is implemented we return success for every remount request, and
silently ignore all options that we can't actually change.
SGI-PV: 985710
SGI-Modid: xfs-linux-melb:xfs-kern:31908a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Memory allocations for log->l_grant_trace and iclog->ic_trace are done on
demand when the first event is logged. In xlog_state_get_iclog_space() we
call xlog_trace_iclog() under a spinlock and allocating memory here can
cause us to sleep with a spinlock held and deadlock the system.
For the log grant tracing we use KM_NOSLEEP but that means we can lose
trace entries. Since there is no locking to serialize the log grant
tracing we could race and have multiple allocations and leak memory.
So move the allocations to where we initialize the log/iclog structures.
Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace
since it's not even used.
SGI-PV: 983738
SGI-Modid: xfs-linux-melb:xfs-kern:31896a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
We already have a cifs_set_file_info function that can flip DOS
attribute bits. Have cifs_unlink call it to handle turning ATTR_HIDDEN
on and ATTR_READONLY off when an unlink attempt returns -EACCES.
This also removes a level of indentation from cifs_unlink.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Change parameters to cifs_unlink to match the ones used in the generic
VFS. Add some local variables to cut down on the amount of struct
dereferencing that needs to be done, and eliminate some unneeded NULL
pointer checks on the parent directory inode. Finally, rename pTcon
to "tcon" to more closely match standard kernel coding style.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The gfs2 superblock pointer is NULL after a failed mount. When control
eventually goes to gfs2_kill_sb, we dereference this NULL pointer. This
patch ensures that the gfs2 superblock pointer is not NULL before being
dereferenced in gfs2_kill_sb.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a problem whereby a direct_io write doesn't fall
back to buffered write properly at end of file.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Herton Krzesinski reports that the error-checking changes in
04ebd4aee5 ("block/ioctl.c and
fs/partition/check.c: check value returned by add_partition") cause his
buggy USB camera to no longer mount. "The camera is an Olympus X-840.
The original issue comes from the camera itself: its format program
creates a partition with an off by one error".
Buggy devices happen. It is better for the kernel to warn and to proceed
with the mount.
Reported-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Abdel Benamrouche <draconux@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A "Quicklists: 0 kB" line has just started appearing in
/proc/meminfo, but most architectures (including x86) don't have
them configured, so #ifdef it, like the highmem lines.
And those architectures which do have quicklists configured are
using them for page tables: so let's place it next to PageTables.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Print parent directory name as well.
The aim is to catch non-creation of parent directory when proc_mkdir will
return NULL and all subsequent registrations go directly in /proc instead
of intended directory.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Fixed insane printk string while at it. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lg_prealloc_list seems to cry out for a per-cpu data structure; on a large
smp system I think this should be better. I've lightly tested this change
on a 4-cpu system.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pick an ioctl number for EXT4_IOC_MIGRATE that won't conflict with
other ext4 ioctl's. Since there haven't been any major userspace
users of this ioctl, we can afford to change this now, to avoid
potential problems later.
Also, reorder the ioctl numbers in ext4.h to avoid this sort of
mistake in the future.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch hooks the ext3 to ext4 migrate interface to
EXT4_IOC_SETFLAGS ioctl. The userspace interface is via chattr +e. We
only allow setting extent flags. Clearing extent flag (migrating from
ext4 to ext3) is not supported.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The migrate ioctl writes to the filsystem, so we need to elevate the
write count.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ocfs2 will become read-only if we try to read the bytes which pass
the end of i_size. This can be easily reproduced by following steps:
1. mkfs a ocfs2 volume with bs=4k cs=4k and nosparse.
2. create a small file(say less than 100 bytes) and we will create the file
which is allocated 1 cluster.
3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit.
4. The ocfs2 volume becomes read-only and dmesg shows:
OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks:
Inode 66010 has a hole at block 1
File system is now read-only due to the potential of on-disk corruption.
Please run fsck.ocfs2 once the file system is unmounted.
So suppress the ERROR message.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6:
UBIFS: make minimum fanout 3
UBIFS: fix division by zero
UBIFS: amend f_fsid
UBIFS: fill f_fsid
UBIFS: improve statfs reporting even more
UBIFS: introduce LEB overhead
UBIFS: add forgotten gc_idx_lebs component
UBIFS: fix assertion
UBIFS: improve statfs reporting
UBIFS: remove incorrect index space check
UBIFS: push empty flash hack down
UBIFS: do not update min_idx_lebs in stafs
UBIFS: allow for racing between GC and TNC
UBIFS: always read hashed-key nodes under TNC mutex
UBIFS: fix zero-length truncations
Automounter maps can contain mount options valid for other NFS
implementations but not for Linux. The Linux automounter uses the
mount command's "-s" command line option ("s" for "sloppy") so that
mount requests containing such options are not rejected.
Commit f45663ce5f attempted to address a
known regression with text-based NFS mount option parsing. Unrecognized
mount options would cause mount requests to fail, even if the "-s"
option was used on the mount command line.
Unfortunately, this commit was not complete as submitted. It adds a
new mount option, "sloppy". But it is missing a hunk, so it now allows
NFS mounts with unrecognized mount options, even if the "sloppy" option
is not present. This could be a problem if a required critical mount
option such as "sync" is misspelled, for example, and is considered a
regression from 2.6.26.
This patch restores the missing hunk. Now, the default behavior of
text-based NFS mount options is as before: any unrecognized mount option
will cause the mount to fail.
Please include this in 2.6.27-rc.
Thanks to Neil Brown for reporting this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UDF currently doesn't set a llseek method for regular files, which
means it will fall back to default_llseek. This means no one can seek
beyond 2 Gigabytes on udf, and that there's not protection vs
the i_size updates from writers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
If there group descriptors are corrupted we need unlock the block
group lock before returning from the function; else we will oops when
freeing a spinlock which is still being held.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate the journal device name once and stash it away in the
journal_s structure. This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer. In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4 creates per-suberblock directory in /proc/ext4/ . Name used as
basis is taken from bdevname, which, surprise, can contain slash.
However, proc while allowing to use proc_create("a/b", parent) form of
PDE creation, assumes that parent/a was already created.
bdevname in question is 'cciss/c0d0p9', directory is not created and all
this stuff goes directly into /proc (which is real bug).
Warning comes when _second_ partition is mounted.
http://bugzilla.kernel.org/show_bug.cgi?id=11321
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a bug which prevented the newly created inodes after a
resize from being used on filesystems with flex_bg.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Note: some people thinks this represents a security bug, since it
might make the system go away while it is printing a large number of
console messages, especially if a serial console is involved. Hence,
it has been assigned CVE-2008-3528, but it requires that the attacker
either has physical access to your machine to insert a USB disk with a
corrupted filesystem image (at which point why not just hit the power
button), or is otherwise able to convince the system administrator to
mount an arbitrary filesystem image (at which point why not just
include a setuid shell or world-writable hard disk device file or some
such). Me, I think they're just being silly. --tytso
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: Eugene Teo <eugeneteo@kernel.sg>
With delayed allocation we use i_data_sem to update i_disksize. We need
to update i_disksize only if the new size specified is greater than the
current value and we need to make sure we don't race with other
i_disksize update. With delayed allocation we will switch to the
write_begin function for non-delayed allocation if we are low on free
blocks. This means the write_begin function for non-delayed allocation
also needs to use the same locking.
We also need to check and update i_disksize even if the new size is less
that inode.i_size because of delayed allocation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For blocksize < pagesize we need to remove blocks that got allocated in
block_write_begin() if we fail with ENOSPC for later blocks.
block_write_begin() internally does this if it allocated pages locally.
This makes sure we don't have blocks outside inode.i_size during ENOSPC.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we truncate files, the meta-data blocks released are not reused
untill we commit the truncate transaction. That means delayed get_block
request will return ENOSPC even if we have free blocks left. Force a
journal commit and retry block allocation if we get ENOSPC with free
blocks left.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure we don't add the inode to the journal handle until after the
block allocation, so that a journal commit will not include the inode in
case of block allocation failure.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We run into ENOSPC error on nonmballoc ext4, even when there is free blocks
on the filesystem.
The patch includes two changes:
a) Set reservation to NULL if we trying to allocate near group_target_block
from the goal group if the free block in the group is less than windows.
This should give us a better chance to allocate near group_target_block.
This also ensures that if we are not allocating near group_target_block
then we don't trun off reservation. This should enable us to allocate
with reservation from other groups that have large free blocks count.
b) we don't need to check the window size if the block reservation is off.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch converts some usage of ext4_fsblk_t to s64. This is needed
so that some of the sign conversion works as expected in if loops.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The delayed allocation code allocates blocks during writepages(), which
can not handle block allocation failures. To deal with this, we switch
away from delayed allocation mode when we are running low on free
blocks. This also allows us to avoid needing to reserve a large number
of meta-data blocks in case all of the requested blocks are
discontiguous.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds dirty block accounting using percpu_counters. Delayed
allocation block reservation is now done by updating dirty block
counter. In a later patch we switch to non delalloc mode if the
filesystem free blocks is greater than 150% of total filesystem dirty
blocks
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
During block reservation if we don't have enough blocks left, retry
block reservation with smaller block counts. This makes sure we try
fallocate and DIO with smaller request size and don't fail early. The
delayed allocation reservation cannot try with smaller block count. So
retry block reservation to handle temporary disk full conditions. Also
print free blocks details if we fail block allocation during writepages.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With delayed allocation we need to make sure block are reserved before
we attempt to allocate them. Otherwise we get block allocation failure
(ENOSPC) during writepages which cannot be handled. This would mean
silent data loss (We do a printk stating data will be lost). This patch
updates the DIO and fallocate code path to do block reservation before
block allocation. This is needed to make sure parallel DIO and fallocate
request doesn't take block out of delayed reserve space.
When free blocks count go below a threshold we switch to a slow patch
which looks at other CPU's accumulated percpu counter values.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
HAVE_AOUT doesn't quite do the same thing as the recently removed
ARCH_SUPPORTS_AOUT config option. That was set even on platforms where
binfmt_aout isn't supported, although it's not entirely clear why.
So it's best just to introduce a new symbol, handled consistently with
other similar HAVE_xxx symbols; with a simple 'select' in the arch Kconfig.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
UBIFS does not really work correctly when fanout is 2,
because of the way we manage the indexing tree. It may
just become a list and UBIFS screws up.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Spencer reported a problem where utime and stime were going negative despite
the fixes in commit b27f03d4bd. The suspected
reason for the problem is that signal_struct maintains it's own utime and
stime (of exited tasks), these are not updated using the new task_utime()
routine, hence sig->utime can go backwards and cause the same problem
to occur (sig->utime, adds tsk->utime and not task_utime()). This patch
fixes the problem
TODO: using max(task->prev_utime, derived utime) works for now, but a more
generic solution is to implement cputime_max() and use the cputime_gt()
function for comparison.
Reported-by: spencer@bluehost.com
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sparc32:
fs/dlm/config.c:397: error: expected identifier or '(' before '{' token
fs/dlm/config.c: In function 'drop_node':
fs/dlm/config.c:589: warning: initialization from incompatible pointer type
fs/dlm/config.c:589: warning: initialization from incompatible pointer type
fs/dlm/config.c: In function 'release_node':
fs/dlm/config.c:601: warning: initialization from incompatible pointer type
fs/dlm/config.c:601: warning: initialization from incompatible pointer type
fs/dlm/config.c: In function 'show_node':
fs/dlm/config.c:717: warning: initialization from incompatible pointer type
fs/dlm/config.c:717: warning: initialization from incompatible pointer type
fs/dlm/config.c: In function 'store_node':
fs/dlm/config.c:726: warning: initialization from incompatible pointer type
fs/dlm/config.c:726: warning: initialization from incompatible pointer type
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Teigland <teigland@redhat.com>
In case of error, the function gfs2_inode_lookup returns an
ERR pointer, but never returns a NULL pointer. So a NULL test that
necessarily comes after an IS_ERR test should be deleted, and a NULL
test that may come after a call to this function should be
strengthened by an IS_ERR test.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = gfs2_inode_lookup(...)
... when != x = E
* if (x != NULL)
S1 else S2
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In the case that a request for a glock arrives right after the
grant reply has arrived, it sometimes means that the gl_tstamp
field hasn't been updated recently enough. The net result is that
the min-hold time for the glock is ignored. If this happens
often enough, it leads to poor performance.
This patch adds an additional test, so that if the reply pending
bit is set on a glock, then it will select the maximum length of
time for the min-hold time, rather than looking at gl_tstamp.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
David Woodhouse suggested to be consistent with other FSes
and xor the beginning and the end of the UUID.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Update the location of the NTFS homepage in several files.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't have any suitable value to put in f_fsid. Using EFS_MAGIC
really isn't a good idea, because all EFS file systems will have the
same f_fsid then.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Compare only the addr and port fields of sockaddr structures.
Fixes a problem with ipv6 where sin6_scope_id does not match.
Signed-off-by: David Teigland <teigland@redhat.com>
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux:
nfsd: fix buffer overrun decoding NFSv4 acl
sunrpc: fix possible overrun on read of /proc/sys/sunrpc/transports
nfsd: fix compound state allocation error handling
svcrdma: Fix race between svc_rdma_recvfrom thread and the dto_tasklet
The array we kmalloc() here is not large enough.
Thanks to Johann Dahm and David Richter for bug report and testing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: David Richter <richterd@citi.umich.edu>
Tested-by: Johann Dahm <jdahm@umich.edu>
Move the cstate_alloc call so that if it fails, the response is setup to
encode the NFS error. The out label now means that the
nfsd4_compound_state has not been allocated.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
UBIFS stores 16-bit UUID in the superblock, and it is a good
idea to return part of it in 'f_fsid' filed of kstatfs structure.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Since free space we report in statfs is file size which should
fit to the FS - change the way we calculate free space and use
leb_overhead instead of dark_wm in calculations.
Results of "freespace" test (120MiB volume, 16KiB LEB size,
512 bytes page size). Before the change:
freespace: Test 1: fill the space we have 3 times
freespace: was free: 85204992 bytes 81.3 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 11284480 bytes 10.8 MiB, wrote 13.2% more than predicted
freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 12935168 bytes 12.3 MiB, wrote 15.5% more than predicted
freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 12939264 bytes 12.3 MiB, wrote 15.5% more than predicted
freespace: Test 1 finished
freespace: Test 2: gradually lessen amount of free space and fill the FS
freespace: do 10 steps, lessen free space by 7596218 bytes 7.2 MiB each time
freespace: was free: 78675968 bytes 75.0 MiB, wrote: 88903680 bytes 84.8 MiB, delta: 10227712 bytes 9.8 MiB, wrote 13.0% more than predicted
freespace: was free: 72015872 bytes 68.7 MiB, wrote: 81514496 bytes 77.7 MiB, delta: 9498624 bytes 9.1 MiB, wrote 13.2% more than predicted
freespace: was free: 63938560 bytes 61.0 MiB, wrote: 72589312 bytes 69.2 MiB, delta: 8650752 bytes 8.2 MiB, wrote 13.5% more than predicted
freespace: was free: 56127488 bytes 53.5 MiB, wrote: 63762432 bytes 60.8 MiB, delta: 7634944 bytes 7.3 MiB, wrote 13.6% more than predicted
freespace: was free: 48336896 bytes 46.1 MiB, wrote: 54935552 bytes 52.4 MiB, delta: 6598656 bytes 6.3 MiB, wrote 13.7% more than predicted
freespace: was free: 40587264 bytes 38.7 MiB, wrote: 46157824 bytes 44.0 MiB, delta: 5570560 bytes 5.3 MiB, wrote 13.7% more than predicted
freespace: was free: 32841728 bytes 31.3 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 4542464 bytes 4.3 MiB, wrote 13.8% more than predicted
freespace: was free: 25100288 bytes 23.9 MiB, wrote: 28618752 bytes 27.3 MiB, delta: 3518464 bytes 3.4 MiB, wrote 14.0% more than predicted
freespace: was free: 17342464 bytes 16.5 MiB, wrote: 19841024 bytes 18.9 MiB, delta: 2498560 bytes 2.4 MiB, wrote 14.4% more than predicted
freespace: was free: 9605120 bytes 9.2 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 1458176 bytes 1.4 MiB, wrote 15.2% more than predicted
freespace: Test 2 finished
freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS
freespace: do 10 steps, lessen free space by 7606272 bytes 7.3 MiB each time
freespace: trashing: was free: 83668992 bytes 79.8 MiB, need free: 7606272 bytes 7.3 MiB, files created: 248297, delete 225724 (90.9% of them)
freespace: was free: 70803456 bytes 67.5 MiB, wrote: 82485248 bytes 78.7 MiB, delta: 11681792 bytes 11.1 MiB, wrote 16.5% more than predicted
freespace: trashing: was free: 81080320 bytes 77.3 MiB, need free: 15212544 bytes 14.5 MiB, files created: 248711, delete 202047 (81.2% of them)
freespace: was free: 59867136 bytes 57.1 MiB, wrote: 71897088 bytes 68.6 MiB, delta: 12029952 bytes 11.5 MiB, wrote 20.1% more than predicted
freespace: trashing: was free: 82243584 bytes 78.4 MiB, need free: 22818816 bytes 21.8 MiB, files created: 248866, delete 179817 (72.3% of them)
freespace: was free: 50905088 bytes 48.5 MiB, wrote: 63168512 bytes 60.2 MiB, delta: 12263424 bytes 11.7 MiB, wrote 24.1% more than predicted
freespace: trashing: was free: 83402752 bytes 79.5 MiB, need free: 30425088 bytes 29.0 MiB, files created: 248920, delete 158114 (63.5% of them)
freespace: was free: 42651648 bytes 40.7 MiB, wrote: 55406592 bytes 52.8 MiB, delta: 12754944 bytes 12.2 MiB, wrote 29.9% more than predicted
freespace: trashing: was free: 84402176 bytes 80.5 MiB, need free: 38031360 bytes 36.3 MiB, files created: 248709, delete 136641 (54.9% of them)
freespace: was free: 35233792 bytes 33.6 MiB, wrote: 48250880 bytes 46.0 MiB, delta: 13017088 bytes 12.4 MiB, wrote 36.9% more than predicted
freespace: trashing: was free: 82530304 bytes 78.7 MiB, need free: 45637632 bytes 43.5 MiB, files created: 248778, delete 111208 (44.7% of them)
freespace: was free: 27287552 bytes 26.0 MiB, wrote: 40267776 bytes 38.4 MiB, delta: 12980224 bytes 12.4 MiB, wrote 47.6% more than predicted
freespace: trashing: was free: 85114880 bytes 81.2 MiB, need free: 53243904 bytes 50.8 MiB, files created: 248508, delete 93052 (37.4% of them)
freespace: was free: 22437888 bytes 21.4 MiB, wrote: 35328000 bytes 33.7 MiB, delta: 12890112 bytes 12.3 MiB, wrote 57.4% more than predicted
freespace: trashing: was free: 84103168 bytes 80.2 MiB, need free: 60850176 bytes 58.0 MiB, files created: 248637, delete 68743 (27.6% of them)
freespace: was free: 15536128 bytes 14.8 MiB, wrote: 28319744 bytes 27.0 MiB, delta: 12783616 bytes 12.2 MiB, wrote 82.3% more than predicted
freespace: trashing: was free: 84357120 bytes 80.4 MiB, need free: 68456448 bytes 65.3 MiB, files created: 248567, delete 46852 (18.8% of them)
freespace: was free: 9015296 bytes 8.6 MiB, wrote: 22044672 bytes 21.0 MiB, delta: 13029376 bytes 12.4 MiB, wrote 144.5% more than predicted
freespace: trashing: was free: 84942848 bytes 81.0 MiB, need free: 76062720 bytes 72.5 MiB, files created: 248636, delete 25993 (10.5% of them)
freespace: was free: 6086656 bytes 5.8 MiB, wrote: 8331264 bytes 7.9 MiB, delta: 2244608 bytes 2.1 MiB, wrote 36.9% more than predicted
freespace: Test 3 finished
freespace: finished successfully
After the change:
freespace: Test 1: fill the space we have 3 times
freespace: was free: 94048256 bytes 89.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 2441216 bytes 2.3 MiB, wrote 2.6% more than predicted
freespace: was free: 92246016 bytes 88.0 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 4247552 bytes 4.1 MiB, wrote 4.6% more than predicted
freespace: was free: 92254208 bytes 88.0 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 4235264 bytes 4.0 MiB, wrote 4.6% more than predicted
freespace: Test 1 finished
freespace: Test 2: gradually lessen amount of free space and fill the FS
freespace: do 10 steps, lessen free space by 8386001 bytes 8.0 MiB each time
freespace: was free: 86605824 bytes 82.6 MiB, wrote: 88252416 bytes 84.2 MiB, delta: 1646592 bytes 1.6 MiB, wrote 1.9% more than predicted
freespace: was free: 78667776 bytes 75.0 MiB, wrote: 80715776 bytes 77.0 MiB, delta: 2048000 bytes 2.0 MiB, wrote 2.6% more than predicted
freespace: was free: 69615616 bytes 66.4 MiB, wrote: 71630848 bytes 68.3 MiB, delta: 2015232 bytes 1.9 MiB, wrote 2.9% more than predicted
freespace: was free: 61018112 bytes 58.2 MiB, wrote: 62783488 bytes 59.9 MiB, delta: 1765376 bytes 1.7 MiB, wrote 2.9% more than predicted
freespace: was free: 52424704 bytes 50.0 MiB, wrote: 53968896 bytes 51.5 MiB, delta: 1544192 bytes 1.5 MiB, wrote 2.9% more than predicted
freespace: was free: 43880448 bytes 41.8 MiB, wrote: 45199360 bytes 43.1 MiB, delta: 1318912 bytes 1.3 MiB, wrote 3.0% more than predicted
freespace: was free: 35332096 bytes 33.7 MiB, wrote: 36425728 bytes 34.7 MiB, delta: 1093632 bytes 1.0 MiB, wrote 3.1% more than predicted
freespace: was free: 26771456 bytes 25.5 MiB, wrote: 27643904 bytes 26.4 MiB, delta: 872448 bytes 852.0 KiB, wrote 3.3% more than predicted
freespace: was free: 18231296 bytes 17.4 MiB, wrote: 18878464 bytes 18.0 MiB, delta: 647168 bytes 632.0 KiB, wrote 3.5% more than predicted
freespace: was free: 9674752 bytes 9.2 MiB, wrote: 10088448 bytes 9.6 MiB, delta: 413696 bytes 404.0 KiB, wrote 4.3% more than predicted
freespace: Test 2 finished
freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS
freespace: do 10 steps, lessen free space by 8397544 bytes 8.0 MiB each time
freespace: trashing: was free: 92372992 bytes 88.1 MiB, need free: 8397552 bytes 8.0 MiB, files created: 248296, delete 225723 (90.9% of them)
freespace: was free: 71909376 bytes 68.6 MiB, wrote: 82472960 bytes 78.7 MiB, delta: 10563584 bytes 10.1 MiB, wrote 14.7% more than predicted
freespace: trashing: was free: 88989696 bytes 84.9 MiB, need free: 16795096 bytes 16.0 MiB, files created: 248794, delete 201838 (81.1% of them)
freespace: was free: 60354560 bytes 57.6 MiB, wrote: 71782400 bytes 68.5 MiB, delta: 11427840 bytes 10.9 MiB, wrote 18.9% more than predicted
freespace: trashing: was free: 90304512 bytes 86.1 MiB, need free: 25192640 bytes 24.0 MiB, files created: 248733, delete 179342 (72.1% of them)
freespace: was free: 51187712 bytes 48.8 MiB, wrote: 62943232 bytes 60.0 MiB, delta: 11755520 bytes 11.2 MiB, wrote 23.0% more than predicted
freespace: trashing: was free: 91209728 bytes 87.0 MiB, need free: 33590184 bytes 32.0 MiB, files created: 248779, delete 157160 (63.2% of them)
freespace: was free: 42704896 bytes 40.7 MiB, wrote: 55050240 bytes 52.5 MiB, delta: 12345344 bytes 11.8 MiB, wrote 28.9% more than predicted
freespace: trashing: was free: 92700672 bytes 88.4 MiB, need free: 41987728 bytes 40.0 MiB, files created: 248848, delete 136135 (54.7% of them)
freespace: was free: 35250176 bytes 33.6 MiB, wrote: 48115712 bytes 45.9 MiB, delta: 12865536 bytes 12.3 MiB, wrote 36.5% more than predicted
freespace: trashing: was free: 93986816 bytes 89.6 MiB, need free: 50385272 bytes 48.1 MiB, files created: 248723, delete 115385 (46.4% of them)
freespace: was free: 29995008 bytes 28.6 MiB, wrote: 41582592 bytes 39.7 MiB, delta: 11587584 bytes 11.1 MiB, wrote 38.6% more than predicted
freespace: trashing: was free: 91881472 bytes 87.6 MiB, need free: 58782816 bytes 56.1 MiB, files created: 248645, delete 89569 (36.0% of them)
freespace: was free: 22511616 bytes 21.5 MiB, wrote: 34705408 bytes 33.1 MiB, delta: 12193792 bytes 11.6 MiB, wrote 54.2% more than predicted
freespace: trashing: was free: 91774976 bytes 87.5 MiB, need free: 67180360 bytes 64.1 MiB, files created: 248580, delete 66616 (26.8% of them)
freespace: was free: 16908288 bytes 16.1 MiB, wrote: 26898432 bytes 25.7 MiB, delta: 9990144 bytes 9.5 MiB, wrote 59.1% more than predicted
freespace: trashing: was free: 92450816 bytes 88.2 MiB, need free: 75577904 bytes 72.1 MiB, files created: 248654, delete 45381 (18.3% of them)
freespace: was free: 10170368 bytes 9.7 MiB, wrote: 19111936 bytes 18.2 MiB, delta: 8941568 bytes 8.5 MiB, wrote 87.9% more than predicted
freespace: trashing: was free: 93282304 bytes 89.0 MiB, need free: 83975448 bytes 80.1 MiB, files created: 248513, delete 24794 (10.0% of them)
freespace: was free: 3911680 bytes 3.7 MiB, wrote: 7872512 bytes 7.5 MiB, delta: 3960832 bytes 3.8 MiB, wrote 101.3% more than predicted
freespace: Test 3 finished
freespace: finished successfully
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The assertion was incorrect, because it did not take into
account free space.
This patch also amends the comments correspondingly, and
cleans them up a little.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When we report free space to user-space, we should not report
0 if the amount of empty LEBs is too low, because they would
be produced by GC when needed. Thus, just call
'ubifs_calc_available()' straight away which would take
'min_idx_lebs' into account anyway.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We have a hack which forces the amount of flash space to be
equivalent to 'c->blocks_cnt' in case of empty FS. This is
to make users happy and see '%0' used in 'df' when they
mount an empty FS. This hack is not needed in
'ubifs_calc_available()', but it is only needed the caller,
in 'ubifs_budg_get_free_space()'. So push it down there.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is bad because the rest of the code should not depend on it,
and this may hide bugss, instead of revealing them.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
If dlm_controld (the userspace daemon that controls the setup and
recovery of the dlm) fails, the kernel should shut down the lockspaces
in the kernel rather than leaving them running. This is detected by
having dlm_controld hold a misc device open while running, and if
the kernel detects a close while the daemon is still needed, it stops
the lockspaces in the kernel.
Knowing that the userspace daemon isn't running also allows the
lockspace create/remove routines to avoid waiting on the daemon
for join/leave operations.
Signed-off-by: David Teigland <teigland@redhat.com>
Add a count for lockspace create and release so that create can
be called multiple times to use the lockspace from different places.
Also add the new flag DLM_LSFL_NEWEXCL to create a lockspace with
the previous behavior of returning -EEXIST if the lockspace already
exists.
Signed-off-by: David Teigland <teigland@redhat.com>
LANMAN session setup did not support Unicode (after session setup, unicode can
still be used though).
Fixes samba bug# 5319
CC: Jeff Layton <jlayton@redhat.com>
CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The direct I/O write codepath for CIFS is done through
cifs_user_write(). That function does not currently call
generic_write_checks() so the file position isn't being properly set
when the file is opened with O_APPEND. It's also not doing the other
"normal" checks that should be done for a write call.
The problem is currently that when you open a file with O_APPEND on a
mount with the directio mount option, the file position is set to the
beginning of the file. This makes any subsequent writes clobber the data
in the file starting at the beginning.
This seems to fix the problem in cursory testing. It is, however
important to note that NFS disallows the combination of
(O_DIRECT|O_APPEND). If my understanding is correct, the concern is
races with multiple clients appending to a file clobbering each others'
data. Since the write model for CIFS and NFS is pretty similar in this
regard, CIFS is probably subject to the same sort of races. What's
unclear to me is why this is a particular problem with O_DIRECT and not
with buffered writes...
Regardless, disallowing O_APPEND on an entire mount is probably not
reasonable, so we'll probably just have to deal with it and reevaluate
this flag combination when we get proper support for O_DIRECT. In the
meantime this patch at least fixes the existing problem.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] deal with the first call of ->show() generating no output
[PATCH] fix ->llseek() for a bunch of directories
[PATCH] fix regular readdir() and friends
[PATCH] fix hpux_getdents()
[PATCH] fix osf_getdirents()
[PATCH] ntfs: use d_add_ci
[PATCH] change d_add_ci argument ordering
[PATCH] fix efs_lookup()
[PATCH] proc: inode number fixlet
The last eight bytes of the password field were not cleared when doing lanman plaintext password authentication. This patch fixes that.
I tested it with Samba by setting password
encryption to no in the server's smb.conf. Other servers also can be
configured to force plaintext authentication. Note that plaintexti
authentication requires setting /proc/fs/cifs/SecurityFlags to 0x30030
on the client (enabling both LANMAN and also plaintext password support).
Also note that LANMAN support (and thus plaintext password support) requires
CONFIG_CIFS_WEAK_PW_HASH to be enabled in menuconfig.
CC: Jeff Layton <jlayton@redhat.com>
CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Otherwise, we're leaking the payload memory.
CC: Stable Kernel <stable@vger.kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: remove blk_queue_tag_depth() and blk_queue_tag_queue()
block: remove unused ->busy part of the block queue tag map
bio: fix __bio_copy_iov() handling of bio->bv_len
bio: fix bio_copy_kern() handling of bio->bv_len
block: submit_bh() inadvertently discards barrier flag on a sync write
block: clean up cmdfilter sysfs interface
block: rename blk_scsi_cmd_filter to blk_cmd_filter
sg: restore command permission for TYPE_SCANNER
block: move cmdfilter from gendisk to request_queue
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: Increment the reference count of an already-active stack.
[PATCH] configfs: Consolidate locking around configfs_detach_prep() in configfs_rmdir()
ocfs2: correctly set i_blocks after inline dir gets expanded
ocfs2: Jump to correct label in ocfs2_expand_inline_dir()
ocfs2: Fix sleep-with-spinlock recovery regression
[PATCH] ocfs2/cluster/netdebug.c: fix warning
[PATCH] ocfs2/cluster/tcp.c: make some functions static
This patch fixes a locking issue in the rename code by ensuring that we hold
the per sb rename lock over both directory and "other" renames which involve
different parent directories.
At the same time, this moved the (only called from one place) function
gfs2_ok_to_move into the file that its called from, so we can mark it
static. This should make a code a bit easier to follow.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Peter Staubach <staubach@redhat.com>
The commit c5dec1c303 introduced
__bio_copy_iov() to add bounce support to blk_rq_map_user_iov.
__bio_copy_iov() uses bio->bv_len to copy data for READ commands after
the completion but it doesn't work with a request that partially
completed. SCSI always completes a PC request as a whole but seems
some don't.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The commit 68154e90c9 introduced
bio_copy_kern() to add bounce support to blk_rq_map_kern.
bio_copy_kern() uses bio->bv_len to copy data for READ commands after
the completion but it doesn't work with a request that partially
completed. SCSI always completes a PC request as a whole but seems
some don't.
This patch fixes bio_copy_kern to handle the above case. As
bio_copy_user does, bio_copy_kern uses struct bio_map_data to store
struct bio_vec.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: Nix <nix@esperi.org.uk>
Tested-by: Nix <nix@esperi.org.uk>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Reported by Milan Broz <mbroz@redhat.com>, commit 18ce3751 inadvertently
made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix
that up.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Currently, we don't check the version in the SPNEGO upcall response
even though one is provided. Jeff and Q have made the corresponding
change to the Samba client (cifs.upcall).
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The ocfs2_stack_driver_request() function failed to increment the
refcount of an already-active stack. It only did the increment on the
first reference. Whoops.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Marcos Matsunaga <marcos.matsunaga@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The TNC mutex is unlocked prematurely when reading leaf nodes
with non-hashed keys. This is unsafe because the node may be
moved by garbage collection and the eraseblock unmapped, although
that has never actually happened during stress testing.
This patch fixes the flaw by detecting the race and retrying with
the TNC mutex locked.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Leaf-nodes that have a hashed key are stored in the
leaf-node-cache (LNC) which is protected by the TNC
mutex. Consequently, when reading a leaf node with
a hashed key (i.e. directory entries, xattr entries)
the TNC mutex is always required.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
seq_read() has a subtle bug - we want the first loop there to go
until at least one *non-empty* record had fit entirely into buffer.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
d_add_ci was lifted 1:1 from ntfs. Change ntfs to use the common
version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As pointed out during review d_add_ci argument order should match d_add,
so switch the dentry and inode arguments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ouch, if number taken from IDA is too big, the intent was to signal an
error, not check for overflow and still do overflowing addition.
One still needs 2^28 proc entries to notice this.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch lets the files using linux/version.h match the files that
#include it.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It appears that configfs_rmdir() can protect configfs_detach_prep() retries with
less calls to {spin,mutex}_{lock,unlock}, and a cleaner code.
This patch does not change any behavior, except that it removes two useless
lock/unlock pairs having nothing inside to protect and providing a useless
barrier.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We were setting i_blocks based on allocation before the extent insert, which
is wrong as the value is a calculation based on ip_clusters which gets
updated as a result of the insert. This patch moves the line in question
to just after the call to ocfs2_insert_extent().
Without this fix, inline directories were temporarily having an i_blocks
value of zero immediately after expansion to extents.
Reported-and-tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we fail to insert extent in ocfs2_expand_inline_dir(), we should go to
out_commit, not out.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This fixes a bug introduced with 539d826409:
[PATCH 2/2] ocfs2: Fix race between mount and recovery
ocfs2_mark_dead_nodes() was reading journal inodes while holding the
spinlock protecting our in-memory recovery state. The fix is very simple -
the disk state is protected by a cluster lock that's already held, so we
just move the spinlock down past the read.
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2/cluster/netdebug.c: fix warning
fs/ocfs2/cluster/netdebug.c:154: warning: format '%lu' expects
type 'long unsigned int', but argument 17 has type 'suseconds_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Commit 0f475b2abe (ocfs2/net: Silence build
warnings) made sense as far as it fixed compile warnings, but it was not
required that it made the functions global.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Update documentation to remind users to update mke2fs.conf
ext4: Fix small file fragmentation
ext4: Initialize writeback_index to 0 when allocating a new inode
ext4: make sure ext4_has_free_blocks returns 0 for ENOSPC
ext4: journal credit fix for the delayed allocation's writepages() function
ext4: Rework the ext4_da_writepages() function
ext4: journal credits reservation fixes for DIO, fallocate
ext4: journal credits reservation fixes for extent file writepage
ext4: journal credits calulation cleanup and fix for non-extent writepage
ext4: Fix bug where we return ENOSPC even though we have plenty of inodes
ext4: don't try to resize if there are no reserved gdt blocks left
ext4: Use ext4_discard_reservations instead of mballoc-specific call
ext4: Fix ext4_dx_readdir hash collision handling
ext4: Fix delalloc release block reservation for truncate
ext4: Fix potential truncate BUG due to i_prealloc_list being non-empty
ext4: Handle unwritten extent properly with delayed allocation
Always allow truncations to zero, even if budgeting thinks there
is no space. UBIFS reserves some space for deletions anyway.
Otherwise, the following happans:
1. create a file, and write as much as possible there, until ENOSPC
2. truncate the file, which fails with ENOSPC, which is not good.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
After commit a97c9bf33f (fix cramfs
making duplicate entries in inode cache) in kernel 2.6.14, named-pipe
on cramfs does not work properly.
It seems the commit make all named-pipe on cramfs share their inode
(and named-pipe buffer).
Make ..._test() refuse to merge inodes with ->i_ino == 1, take inode setup
back to get_cramfs_inode() and make ->drop_inode() evict ones with ->i_ino
== 1 immediately.
Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org> [2.6.14 and later]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP
process, only the task leader of the process is affected, all other
sibling LWP threads didn't receive the setting. The problem was that the
iterator used in sys_setpriority() only iteartes over one task for each
process, ignoring all other sibling thread.
Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk
each thread of a process. Convert 4 call sites in {set/get}priority and
ioprio_{set/get}.
Signed-off-by: Ken Chen <kenchen@google.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case the binfmt_misc binary handler is registered *before* the e.g.
script one (when for example being compiled as a module) the following
situation may occur:
1. user launches a script, whose interpreter is a misc binary;
2. the load_misc_binary sets the misc_bang and returns -ENOEVEC,
since the binary is a script;
3. the load_script_binary loads one and calls for search_binary_hander
to run the interpreter;
4. the load_misc_binary is called again, but refuses to load the
binary due to misc_bang bit set.
The fix is to move the misc_bang setting lower - prior to the actual
call to the search_binary_handler.
Caused by the commit 3a2e7f47 (binfmt_misc.c: avoid potential kernel
stack overflow)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: <stable@kernel.org> [2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There was another FAT BKL conversion deadlock reported by Bart
Trojanowski due to the BKL being used as a recursive lock by FAT, which
was missed because it only triggers with 'sync' (or 'dirsync') mounts.
The recursion worked for the BKL, but after the conversion to lock_super
(which uses a mutex), it just deadlocks.
Thanks to Bart for debugging this and testing the fix. The lock
debugging information from the original report:
=============================================
[ INFO: possible recursive locking detected ]
2.6.27-rc3-bisect-00448-ga7f5aaf #16
---------------------------------------------
mv/4020 is trying to acquire lock:
(&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20
but task is already holding lock:
(&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20
other info that might help us debug this:
3 locks held by mv/4020:
#0: (&sb->s_type->i_mutex_key#9/1){--..}, at: [<c01b2336>] do_unlinkat+0x66/0x140
#1: (&sb->s_type->i_mutex_key#9){--..}, at: [<c01b0954>] vfs_unlink+0x84/0x110
#2: (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20
stack backtrace:
Pid: 4020, comm: mv Not tainted 2.6.27-rc3-bisect-00448-ga7f5aaf #16
[<c014e694>] validate_chain+0x984/0xea0
[<c0108d70>] ? native_sched_clock+0x0/0xf0
[<c014ee9c>] __lock_acquire+0x2ec/0x9b0
[<c014f5cf>] lock_acquire+0x6f/0x90
[<c01a90fe>] ? lock_super+0x1e/0x20
[<c044e5fd>] mutex_lock_nested+0xad/0x300
[<c01a90fe>] ? lock_super+0x1e/0x20
[<c01a90fe>] ? lock_super+0x1e/0x20
[<c01a90fe>] lock_super+0x1e/0x20
[<f8b3a700>] fat_write_inode+0x60/0x2b0 [fat]
[<c0450878>] ? _spin_unlock_irqrestore+0x48/0x80
[<f8b3a953>] ? fat_sync_inode+0x3/0x20 [fat]
[<f8b3a962>] fat_sync_inode+0x12/0x20 [fat]
[<f8b37c7e>] fat_remove_entries+0xbe/0x120 [fat]
[<f8b422ef>] vfat_unlink+0x5f/0x90 [vfat]
[<f8b42290>] ? vfat_unlink+0x0/0x90 [vfat]
[<c01b0968>] vfs_unlink+0x98/0x110
[<c01b2400>] do_unlinkat+0x130/0x140
[<c016a8f5>] ? audit_syscall_entry+0x105/0x150
[<c01b253b>] sys_unlinkat+0x3b/0x40
[<c01040d3>] sysenter_do_call+0x12/0x3f
=======================
where the deadlock is due to the nesting of lock_super from vfat_unlink
to fat_write_inode:
- do_unlinkat
- vfs_unlink
- vfat_unlink
* lock_super
- fat_remove_entries
- fat_sync_inode
- fat_write_inode
* lock_super
and the fix is to simply remove the use of lock_super() in fat_write_inode.
The lock_super() there had been just an automatic conversion of the
kernel lock to the superblock lock, but no locking was actually needed
there, since the code in fat_write_inode already protected all relevant
accesses with a spinlock (sbi->inode_hash_lock to be exact). The only
code inside the BKL (and thus the superblock lock) was accesses tp local
variables or calls to functions that have long been SMP-safe (i.e.
sb_bread, mark_buffe_dirty and brlese).
Bart reports:
"Looks good. I ran 10 parallel processes creating 1M files truncating
them, writing to them again and then deleting them. This patch fixes
the issue I ran into.
Signed-off-by: Bart Trojanowski <bart@jukie.net>"
Reported-and-tested-by: Bart Trojanowski <bart@jukie.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are a bit agressive in invalidating all the pages. But
it is ok because we really don't know why the block allocation
failed and it is better to come of the writeback path
so that user can look for more info.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
percpu_counter_sum_and_set() and percpu_counter_sum() is the same except
the former updates the global counter after accounting. Since we are
taking the fbc->lock to calculate the precise value of the counter in
percpu_counter_sum() anyway, it should simply set fbc->count too, as the
percpu_counter_sum_and_set() does.
This patch merges these two interfaces into one.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Properly handle MSKRB5 by passing sec=mskrb5 to the upcall so that the
spengo blob can be generated appropriately. Also, make
decode_negTokenInit prefer whichever mechanism is first in the list.
Needed for some NetApp servers, and possibly some older
versions of Windows which treat the two KRB5 mechanisms differently.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs_setup_session references pSesInfo->server several times. That
pointer shouldn't change during the life of the function so grab it
once and store it in a local var. This makes the code look a little
cleaner too.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
I case we failed to allocate memory for inode when creating it, we did not
properly free block already allocated for this inode. Move memory allocation
before the block allocation which fixes this issue (thanks for the idea go to
Ingo Oeser <ioe-lkml@rameria.de>). Also remove a few superfluous
initializations already done in udf_alloc_inode().
Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Jan Kara <jack@suse.cz>
A memory allocation inside alloc_mutex must not recurse back into the
filesystem itself because that leads to lock inversion between iprune_mutex and
alloc_mutex (and thus to deadlocks - see traces below). alloc_mutex is actually
needed only to update allocation statistics in the superblock so we can drop it
before we start allocating memory for the inode.
tar D ffff81015b9c8c90 0 6614 6612
ffff8100d5a21a20 0000000000000086 0000000000000000 00000000ffff0000
ffff81015b9c8c90 ffff81015b8f0cd0 ffff81015b9c8ee0 0000000000000000
0000000000000003 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
[<ffffffff803c1bef>] mutex_lock+0xa/0xb
[<ffffffff8027f8c2>] shrink_icache_memory+0x38/0x200
[<ffffffff80257742>] shrink_slab+0xe3/0x15b
[<ffffffff802579db>] try_to_free_pages+0x221/0x30d
[<ffffffff8025657e>] isolate_pages_global+0x0/0x31
[<ffffffff8025324b>] __alloc_pages_internal+0x252/0x3ab
[<ffffffff8026b08b>] cache_alloc_refill+0x22e/0x47b
[<ffffffff8026ae37>] kmem_cache_alloc+0x3b/0x61
[<ffffffff8026b15b>] cache_alloc_refill+0x2fe/0x47b
[<ffffffff8026b34e>] __kmalloc+0x76/0x9c
[<ffffffffa00751f2>] :udf:udf_new_inode+0x202/0x2e2
[<ffffffffa007ae5e>] :udf:udf_create+0x2f/0x16d
[<ffffffffa0078f27>] :udf:udf_lookup+0xa6/0xad
...
kswapd0 D ffff81015b9d9270 0 125 2
ffff81015b903c28 0000000000000046 ffffffff8028cbb0 00000000fffffffb
ffff81015b9d9270 ffff81015b8f0cd0 ffff81015b9d94c0 000000000271b490
ffffe2000271b458 ffffe2000271b420 ffffe20002728dc8 ffffe20002728d90
Call Trace:
[<ffffffff8028cbb0>] __set_page_dirty+0xeb/0xf5
[<ffffffff8025403a>] get_dirty_limits+0x1d/0x22f
[<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
[<ffffffff803c1bef>] mutex_lock+0xa/0xb
[<ffffffffa0073f58>] :udf:udf_bitmap_free_blocks+0x47/0x1eb
[<ffffffffa007df31>] :udf:udf_discard_prealloc+0xc6/0x172
[<ffffffffa007875a>] :udf:udf_clear_inode+0x1e/0x48
[<ffffffff8027f121>] clear_inode+0x6d/0xc4
[<ffffffff8027f7f2>] dispose_list+0x56/0xee
[<ffffffff8027fa5a>] shrink_icache_memory+0x1d0/0x200
[<ffffffff80257742>] shrink_slab+0xe3/0x15b
[<ffffffff80257e93>] kswapd+0x346/0x447
...
Reported-by: Tibor Tajti <tibor.tajti@gmail.com>
Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Jan Kara <jack@suse.cz>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] mount of IPC$ breaks with iget patch
[CIFS] remove trailing whitespace
[CIFS] if get root inode fails during mount, cleanup tree connection
* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6: (29 commits)
UBIFS: xattr bugfixes
UBIFS: remove unneeded check
UBIFS: few commentary fixes
UBIFS: fix budgeting request alignment in xattr code
UBIFS: improve arguments checking in debugging messages
UBIFS: always set i_generation to 0
UBIFS: correct spelling of "thrice".
UBIFS: support splice_write
UBIFS: minor tweaks in commit
UBIFS: reserve more space for index
UBIFS: print pid in dump function
UBIFS: align inode data to eight
UBIFS: improve budgeting checks
UBIFS: correct orphan deletion order
UBIFS: fix typos in comments
UBIFS: do not union creat_sqnum and del_cmtno
UBIFS: optimize deletions
UBIFS: increment commit number earlier
UBIFS: remove another unneeded function parameter
UBIFS: remove unneeded function parameter
...
A fuzzed fileystem image failed with OMFS when the extent count was
used in a loop without being checked against the max number of extents.
It also provoked a signed division for an array index that was checked
as if unsigned, leading to index by -1.
omfsck will be updated to fix these cases, in the meantime bail out
gracefully.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
write_cache_pages() uses i_mapping->writeback_index to pick up where it
left off the last time a given inode was found by pdflush or
balance_dirty_pages (or anyone else who sets wbc->range_cyclic)
alloc_inode() should set it to a sane value so that writeback doesn't
start in the middle of a file. It is somewhat difficult to notice the bug
since write_cache_pages will loop around to the start of the file and the
elevator helps hide the resulting seeks.
For whatever reason, Btrfs hits this often. Unpatched, untarring 30
copies of the linux kernel in series runs at 47MB/s on a single sata
drive. With this fix, it jumps to 62MB/s.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xattr code has not been tested for a while and there were
serveral bugs. One of them is using wrong inode in
'ubifs_jnl_change_xattr()'. The other is a deadlock in
'ubifs_setxattr()': the i_mutex is locked in
'cap_inode_need_killpriv()' path, so deadlock happens when
'ubifs_setxattr()' tries to lock it again.
Thanks to Zoltan Sogor for finding these bugs.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
In looking at network named pipe support on cifs, I noticed that
Dave Howell's iget patch:
iget: stop CIFS from using iget() and read_inode()
broke mounts to IPC$ (the interprocess communication share), and don't
handle the error case (when getting info on the root inode fails).
Thanks to Gunter who noted a typo in a debug line in the original
version of this patch.
CC: David Howells <dhowells@redhat.com>
CC: Gunter Kukkukk <linux@kukkukk.com>
CC: Stable Kernel <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The patches that are intended to introduce copy-on-write credentials for 2.6.28
require abstraction of access to some fields of the task structure,
particularly for the case of one task accessing another's credentials where RCU
will have to be observed.
Introduced here are trivial no-op versions of the desired accessors for current
and other tasks so that other subsystems can start to be converted over more
easily.
Wrappers are introduced into a new header (linux/cred.h) for UID/GID,
EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed
user_struct. These wrappers are macros because the ordering between header
files mitigates against making them inline functions.
linux/cred.h is #included from linux/sched.h.
Further, XFS is modified such that it no longer defines and uses parameterised
versions of current_fs[ug]id(), thus getting rid of the namespace collision
otherwise incurred.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
* git://oss.sgi.com:8090/xfs/linux-2.6: (45 commits)
[XFS] Fix use after free in xfs_log_done().
[XFS] Make xfs_bmap_*_count_leaves void.
[XFS] Use KM_NOFS for debug trace buffers
[XFS] use KM_MAYFAIL in xfs_mountfs
[XFS] refactor xfs_mount_free
[XFS] don't call xfs_freesb from xfs_unmountfs
[XFS] xfs_unmountfs should return void
[XFS] cleanup xfs_mountfs
[XFS] move root inode IRELE into xfs_unmountfs
[XFS] stop using file_update_time
[XFS] optimize xfs_ichgtime
[XFS] update timestamp in xfs_ialloc manually
[XFS] remove the sema_t from XFS.
[XFS] replace dquot flush semaphore with a completion
[XFS] replace inode flush semaphore with a completion
[XFS] extend completions to provide XFS object flush requirements
[XFS] replace the XFS buf iodone semaphore with a completion
[XFS] clean up stale references to semaphores
[XFS] use get_unaligned_* helpers
[XFS] Fix compile failure in xfs_buf_trace()
...
Add a dlm_ prefix to the struct names in config.c. This resolves a
conflict with struct node in particular, when include/linux/node.h
happens to be included.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Teigland <teigland@redhat.com>
A couple of unlikely error conditions were missing a kfree on the error
exit path.
Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Commit d70b67c8bc fixed VFS and
it never calls FS lookup function in deleted directories now.
We may remove corresponding UBIFS check.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch fixes a problem whereby simultaneous unlink, rmdir,
rename and link operations (e.g. rm -fR *) from multiple nodes
on the same GFS2 file system can cause kernel panics, hangs,
and/or memory corruption. It also gets rid of all the non-rgrp
calls to gfs2_glock_nq_m.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is intended to fix the issues reported in bz #457798. Instead
of having the metafs as a separate filesystem, it becomes a second root
of gfs2. As a result it will appear as type gfs2 in /proc/mounts, but it
is still possible (for backwards compatibility purposes) to mount it as
type gfs2meta. A new mount flag "meta" is introduced so that its possible
to tell the two cases apart in /proc/mounts.
As a result it becomes possible to mount type gfs2 with -o meta and
get the same result as mounting type gfs2meta. So it is possible to
mount just the metafs on its own. Currently if you do this, its then
impossible to mount the "normal" root of the gfs2 filesystem without
first unmounting the metafs root. I'm not sure if thats a feature or
a bug :-)
Either way, this is a great improvement on the previous scheme and I've
verified that it works ok with bind mounts on both the "normal" root
and the metafs root in various combinations.
There were also a bunch of functions in super.c which didn't belong there,
so this moves them into ops_fstype.c where they can be static. Hopefully
the mount/umount sequence is now more obvious as a result.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Due to an incorrect iterator, some glocks were being missed from the
glock dumps obtained via debugfs. This patch fixes the problem and
ensures that we don't miss any glocks in future.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Data length has to be aligned in the budgeting request. Code
in xattr.c did not do this.
Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Use "if (0) printk()" construct in debugging print macros to
make the debugging messages be checked even if debugging is
off.
This patch also removes some unneeded spaces and blank lines.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS does not presently re-use inode numbers, so leaving
i_generation zero is most appropriate for now.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
At the moment UBIFS reserves twice old index size space for the
index. But this is not enough in some cases, because if the indexing
node are very fragmented and there are many small gaps, while the
dirty index has big znodes - in-the-gaps method would fail.
Thus, reserve trise as more, in which case we are guaranteed that
we can commit in any case.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS aligns node lengths to 8, so budgeting has to do the
same. Well, direntry, inode, and page budgets are already
aligned, but not inode data budget (e.g., data in special
devices or symlinks). Do this for inode data as well.
Also, add corresponding debugging checks.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Budgeting is a crucial UBIFS subsystem - add more assertions
to improve requests checking. This is not compiled in when
UBIFS debugging is disabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The debug function that checks orphans, does so using the
TNC mutex. That means it will not see a correct picture
if the inode is removed from the orphan tree before it is
removed from TNC.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
The values in these two fields need to be preserved independently
and so a union cannot be used.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Every time anything is deleted, UBIFS writes the deletion inode
node twice - once in 'ubifs_jnl_update()' and the second time in
'ubifs_jnl_write_inode()'. However, the second write is not needed
if no commit happened after 'ubifs_jnl_update()'. This patch
checks that condition and avoids writing the deletion inode for
the second time.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Increment the commit number at the beginnig of the commit, instead
of doing this after the commit. This is needed for further
optimizations.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'last_reference' parameter of 'pack_inode()' is not really
needed because 'inode->i_nlink' may be tested instead. Zap it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Simplify 'ubifs_jnl_write_inode()' by removing the 'deletion'
parameter which is not really needed because we may test
inode->i_nlink and check whether this is a deletion or not.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Orphan inodes are deleted inodes which will disappear after FS
re-mount. There is not need to write orphan inodes back, because
they are not needed on the flash media.
So optimize orphans a little by not writing them back. Just mark
them as clean, free the budget, and report success to VFS.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We use ubifs_ro_mode() quite a lot, and not in fast-path, so
there is no reason to blow the code up by having it inlined.
Also, we usually want R/O mode change to be seen to other
CPUs as soon as possible, so when we make this a function
call, we will automatically have a memory barrier.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBI transparently handles write errors by automatically copying
and remapping the affected eraseblock. If UBI is unable to do
that, for example its pool of eraseblocks reserved for bad block
handling is empty, then the error is propagated to UBIFS. UBIFS
must protect the media from falling into an inconsistent state
by immediately switching to read-only mode. In the case of log
updates, this was not being done.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
UBIFS recovery testing debug facility simulates media failures.
When simulating an IO error, the error code returned must be
-EIO but it was not always if the user switched off the
debug recovery testing option at the same time.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Although the inode is marked as clean when it is being deleted,
it might stay and be used as orphan, and be marked as dirty.
So we have to free the budget when we delete it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'ubifs_release_dirty_inode_budget()' was buggy and incorrectly
freed the budget, which led to not freeing all dirty data budget.
This patch fixes that.
Also, this patch fixes ubifs_mkdir() which passed 1 in dirty_ino_d,
which makes no sense. Well, it is harmless though.
Also, add few more useful assertions. And improve few debugging
messages.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We encouredge people to mount using volume name, not device
numbers. So print the name of the mounted UBI volume, not just
IDs.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The ticket allocation code got reworked in 2.6.26 and we now free tickets
whereas before we used to cache them so the use-after-free went
undetected.
SGI-PV: 985525
SGI-Modid: xfs-linux-melb:xfs-kern:31877a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.
In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_MAYFAIL for the m_perag allocation, we can deal with the error
easily and blocking forever during mount is not a good idea either.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31837a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_free mostly frees the perag data, which is something that is
duplicated in the mount error path.
Move the XFS_QM_DONE call to the caller and remove the useless
mutex_destroy/spinlock_destroy calls so that we can re-use it for the
mount error path. Also rename it to xfs_free_perag to reflect what it
does.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31836a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmounts can't and shouldn't return errors so declare it as returning
void.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31833a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove all the useless flags and code keyed off it in xfs_mountfs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no
need to call file_update_time and then copy the values over to the XFS
inode. The only additional thing in file_update_time are checks not
applicable to the write path.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31829a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Port a little optmization from file_update_time to xfs_ichgtime, and only
update the timestamp and mark the inode dirty if the timestamp actually
changes in the timer tick resultion supported by the running kernel.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31827a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.
So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all users of the sema_t are gone from XFS we can finally kill it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31823a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31822a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a
completion. Change it to a completion and remove the last user of the
sema_t from XFS.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31815a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
A lot of code has been converted away from semaphores, but there are still
comments that reference semaphore behaviour. The log code is the worst
offender. Update the comments to reflect what the code really does now.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31814a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The alloc and inobt btree use the same agbp/agno pair in the btree_cur
union. Make them use the same bc_private.a union member so that code for
these two short form btree implementations can be shared.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31788a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Sanitize setting up the Linux indode.
Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.
xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31782a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31776a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
