Add csc_transform struct to dc_stream_update, and program if set when
updating streams
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
I2C code did not match dc resource model and was generally
unpleasant
[How]
Move code into new svelte dce_i2c files, replacing various i2c
objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split
sw and hw code paths. Remove all redundant declarations. Use
address lists to distinguish between versions. Change dce80 code
to newer register access macros.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Improve commit d796d844 (drm/radeon/kms: make hibernate work on IGPs) to
only migrate VRAM objects if the Linux kernel is actually built with
support for hibernation (suspend to disk).
The better solution is to get the information, if this is suspend or
hibernate, from `amdgpu_device_suspend()`, but that’s more involved, so
apply the simple solution first.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=107277
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The status field must be 0 after FW is loaded.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raven doesn't have an VCE block and so also no buggy VCE firmware.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After set power ungate state, set clock ungate state
before when suspend or fini.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unify to set power ungate state at the begin of suspend/fini.
Remove the workaround code for gfx off feature in
amdgpu_device.c.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are no any logical changes here.
1. change function names:
amdgpu_device_ip_late_set_pg/cg_state to
amdgpu_device_set_pg/cg_state.
2. add a function argument cg/pg_state, so
we can enable/disable cg/pg through those functions
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gamut remap to dc_stream_update struct, and program if set when updating
streams.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recently we fixed HDR static meta using AFMT registers to be treated as
fast stream update.
Dynamic meta is still being treated as (full) surface update because it
touches HUBP and it travels with pipe data.
Here we change it to be (fast) stream update.
Note, originally we also wanted to redesign here a bit, but without OS
level support for true dynamic meta, it's left the same. We are simply
using HW that can do dynamic meta to send HDR static meta, I still prefer
keeping it in one static meta type then defining dynamic meta types to
hold the same info. Once we know how OS interfaces look like, we can
do proper design.
[How]
Move dyn meta update from update_hubp_dpp to commit_planes_do_stream_update
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vesa DPMS tool sends different HDR meta in OS flips without changing output
parameters. We don't properly update HDR info frame:
- we label HDR meta update as fast update
- when updating HW info frame, we only do it if full update
[How]
It should still be fast update, so when doing HW infoframe update,
do it always no matter the update type.
Also, don't request passive flip for HDR meta update only without output
transfer function or color space changed.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- program infoframe for Stereo
- program stereo flip control registers properly
v2: Add missing license headers
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed when pushing public patch for 3e3a40b03847 (drm/amd/display:
Updated HDR Static Metadata to directly take info packet raw)
This is currently no problem yet since we're not doing HDR on Linux yet.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need to register once OS calls the interrupt control.
Also, if we are entering static screen mode, disable after ramping is done.
Disable shall be done via timer of 2 seconds regardless of ramping
complete or not, just to simplify.
Also, ramp to mid instead of min, due to better flicker performance...
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tearing occurred because new VTOTAL MIN/MAX was being programmed
too early.
The flip can happen within the VUPDATE high region, and the new min/max
would take effect immediately. But this means that frame is not variable
anymore, and tearing would occur when the flip actually happens.
The fixed insert duration should be programmed on the first VUPDATE
interrupt instead.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ignore MSA bit on DP display is usually set during SetTimings, but
there was a case where the module thought refresh rate was not valid
and ignore MSA bit was not set.
Later, a valid refresh rate range was requested but since ignore MSA bit
not set, it caused black screen.
Issue if with how the module checked for VRR support. Fix up that logic.
DM should call new valid_range function to determine if timing is supported.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This issue occurs if refresh rate range is very small and lfc is not used.
When frame spikes occur, refresh rate becomes fixed and will not restore properly
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dependency on internal sink map and instead
use existing stream and plane state
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add code to tear down freesync modules when disabled.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With PSP firmware loading, TMR mc address is supposed to be used.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Further demangle ring from entity handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Further unmangle amdgpu.h.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more since that is now done by the scheduler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start to use the scheduler load balancing for userspace compute
command submissions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start to use the scheduler load balancing for userspace SDMA
command submissions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of the fixed round robin use let the scheduler balance the load
of page table updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With PSP firmware loading, TMR mc address is supposed to be used.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We accidentally left out the size of the amdgpu_bo_list struct. It
could lead to memory corruption on 32 bit systems. You'd have to
pick the absolute maximum and set "num_entries == 59652323" then size
would wrap to 16 bytes.
Fixes: 920990cb08 ("drm/amdgpu: allocate the bo_list array after the list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also ajust the gfx domain voltage on Tonga when user overdriver
the voltage.
For Tonga, Driver do not update user's setting to voltage table
in smu, we only pick up a minimum value from voltage table that
not less than the user's setting.
v2: fix a typo
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cancel the delay work to avoid the corner case that
ib test was not running when suspend
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enlarge the PSP TMR SIZE to 4M for dual UVD fw front-door loading.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the goldensettings for vega20.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Run AFLL BTC after upload pptable and before enabling
all smu features.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The latest SMU fw removes the limitation that required
UCLK >= DCEFCLK.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise there may be potential SMU performance issues.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vega20, there are two UVD rings which share one powerplay instance.
Under some case(two rings used parallel), the uvd dpm is disabled twice
which causes the SMC hang.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SOC voltage is not able to switch and forced to low 0.8V when running HEVC.
Thus the test failed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set fclk ss as enabled on default.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
