mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 19:16:10 +07:00
eaba68785c
534 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mike Kravetz
|
dff11abe28 |
hugetlb: take PMD sharing into account when flushing tlb/caches
When fixing an issue with PMD sharing and migration, it was discovered via code inspection that other callers of huge_pmd_unshare potentially have an issue with cache and tlb flushing. Use the routine adjust_range_if_pmd_sharing_possible() to calculate worst case ranges for mmu notifiers. Ensure that this range is flushed if huge_pmd_unshare succeeds and unmaps a PUD_SUZE area. Link: http://lkml.kernel.org/r/20180823205917.16297-3-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mike Kravetz
|
017b1660df |
mm: migration: fix migration of huge PMD shared pages
The page migration code employs try_to_unmap() to try and unmap the source
page. This is accomplished by using rmap_walk to find all vmas where the
page is mapped. This search stops when page mapcount is zero. For shared
PMD huge pages, the page map count is always 1 no matter the number of
mappings. Shared mappings are tracked via the reference count of the PMD
page. Therefore, try_to_unmap stops prematurely and does not completely
unmap all mappings of the source page.
This problem can result is data corruption as writes to the original
source page can happen after contents of the page are copied to the target
page. Hence, data is lost.
This problem was originally seen as DB corruption of shared global areas
after a huge page was soft offlined due to ECC memory errors. DB
developers noticed they could reproduce the issue by (hotplug) offlining
memory used to back huge pages. A simple testcase can reproduce the
problem by creating a shared PMD mapping (note that this must be at least
PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using
migrate_pages() to migrate process pages between nodes while continually
writing to the huge pages being migrated.
To fix, have the try_to_unmap_one routine check for huge PMD sharing by
calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared
mapping it will be 'unshared' which removes the page table entry and drops
the reference on the PMD page. After this, flush caches and TLB.
mmu notifiers are called before locking page tables, but we can not be
sure of PMD sharing until page tables are locked. Therefore, check for
the possibility of PMD sharing before locking so that notifiers can
prepare for the worst possible case.
Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com
[mike.kravetz@oracle.com: make _range_in_vma() a static inline]
Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com
Fixes:
|
||
|
Souptick Joarder
|
2b74030354 |
mm: Change return type int to vm_fault_t for fault handlers
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit
|
||
|
Naoya Horiguchi
|
6bc9b56433 |
mm: fix race on soft-offlining free huge pages
Patch series "mm: soft-offline: fix race against page allocation".
Xishi recently reported the issue about race on reusing the target pages
of soft offlining. Discussion and analysis showed that we need make
sure that setting PG_hwpoison should be done in the right place under
zone->lock for soft offline. 1/2 handles free hugepage's case, and 2/2
hanldes free buddy page's case.
This patch (of 2):
There's a race condition between soft offline and hugetlb_fault which
causes unexpected process killing and/or hugetlb allocation failure.
The process killing is caused by the following flow:
CPU 0 CPU 1 CPU 2
soft offline
get_any_page
// find the hugetlb is free
mmap a hugetlb file
page fault
...
hugetlb_fault
hugetlb_no_page
alloc_huge_page
// succeed
soft_offline_free_page
// set hwpoison flag
mmap the hugetlb file
page fault
...
hugetlb_fault
hugetlb_no_page
find_lock_page
return VM_FAULT_HWPOISON
mm_fault_error
do_sigbus
// kill the process
The hugetlb allocation failure comes from the following flow:
CPU 0 CPU 1
mmap a hugetlb file
// reserve all free page but don't fault-in
soft offline
get_any_page
// find the hugetlb is free
soft_offline_free_page
// set hwpoison flag
dissolve_free_huge_page
// fail because all free hugepages are reserved
page fault
...
hugetlb_fault
hugetlb_no_page
alloc_huge_page
...
dequeue_huge_page_node_exact
// ignore hwpoisoned hugepage
// and finally fail due to no-mem
The root cause of this is that current soft-offline code is written based
on an assumption that PageHWPoison flag should be set at first to avoid
accessing the corrupted data. This makes sense for memory_failure() or
hard offline, but does not for soft offline because soft offline is about
corrected (not uncorrected) error and is safe from data lost. This patch
changes soft offline semantics where it sets PageHWPoison flag only after
containment of the error page completes successfully.
Link: http://lkml.kernel.org/r/1531452366-11661-2-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Suggested-by: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <zy.zhengyi@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Cannon Matthews
|
330d6e489a |
mm/hugetlb.c: don't zero 1GiB bootmem pages
When using 1GiB pages during early boot, use the new memblock_virt_alloc_try_nid_raw() to allocate memory without zeroing it. Zeroing out hundreds or thousands of GiB in a single core memset() call is very slow, and can make early boot last upwards of 20-30 minutes on multi TiB machines. The memory does not need to be zero'd as the hugetlb pages are always zero'd on page fault. Tested: Booted with ~3800 1G pages, and it booted successfully in roughly the same amount of time as with 0, as opposed to the 25+ minutes it would take before. Link: http://lkml.kernel.org/r/20180711213313.92481-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: David Matlack <dmatlack@google.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Kravetz
|
40d18ebffb |
mm/hugetlb: remove gigantic page support for HIGHMEM
This reverts |
||
|
Huang Ying
|
974e6d66b6 |
mm, hugetlbfs: pass fault address to cow handler
This is to take better advantage of the general huge page copying optimization. Where, the target subpage will be copied last to avoid the cache lines of target subpage to be evicted when copying other subpages. This works better if the address of the target subpage is available when copying huge page. So hugetlbfs page fault handlers are changed to pass that information to hugetlb_cow(). This will benefit workloads which don't access the begin of the hugetlbfs huge page after the page fault under heavy cache contention. Link: http://lkml.kernel.org/r/20180524005851.4079-5-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Huang Ying
|
5b7a1d4060 |
mm, hugetlbfs: rename address to haddr in hugetlb_cow()
To take better advantage of general huge page copying optimization, the target subpage address will be passed to hugetlb_cow(), then copy_user_huge_page(). So we will use both target subpage address and huge page size aligned address in hugetlb_cow(). To distinguish between them, "haddr" is used for huge page size aligned address to be consistent with Transparent Huge Page naming convention. Now, only huge page size aligned address is used in hugetlb_cow(), so the "address" is renamed to "haddr" in hugetlb_cow() in this patch. Next patch will use target subpage address in hugetlb_cow() too. The patch is just code cleanup without any functionality changes. Link: http://lkml.kernel.org/r/20180524005851.4079-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jane Chu
|
eec3636ad1 |
ipc/shm.c add ->pagesize function to shm_vm_ops
Commit |
||
|
Cannon Matthews
|
520495fe96 |
mm: hugetlb: yield when prepping struct pages
When booting with very large numbers of gigantic (i.e. 1G) pages, the operations in the loop of gather_bootmem_prealloc, and specifically prep_compound_gigantic_page, takes a very long time, and can cause a softlockup if enough pages are requested at boot. For example booting with 3844 1G pages requires prepping (set_compound_head, init the count) over 1 billion 4K tail pages, which takes considerable time. Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to prevent this lockup. Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and no softlockup is reported, and the hugepages are reported as successfully setup. Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
6da2ec5605 |
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Huang Ying
|
285b8dcaac |
mm, hugetlbfs: pass fault address to no page handler
This is to take better advantage of general huge page clearing
optimization (commit
|
||
|
Souptick Joarder
|
b3ec9f33ac |
mm: change return type to vm_fault_t
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
See commit
|
||
|
Jonathan Corbet
|
24844fd339 |
Merge branch 'mm-rst' into docs-next
Mike Rapoport says: These patches convert files in Documentation/vm to ReST format, add an initial index and link it to the top level documentation. There are no contents changes in the documentation, except few spelling fixes. The relatively large diffstat stems from the indentation and paragraph wrapping changes. I've tried to keep the formatting as consistent as possible, but I could miss some places that needed markup and add some markup where it was not necessary. [jc: significant conflicts in vm/hmm.rst] |
||
|
Mike Rapoport
|
ad56b738c5 |
docs/vm: rename documentation files to .rst
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Dan Williams
|
05ea88608d |
mm, hugetlbfs: introduce ->pagesize() to vm_operations_struct
When device-dax is operating in huge-page mode we want it to behave like
hugetlbfs and report the MMU page mapping size that is being enforced by
the vma.
Similar to commit
|
||
|
Dan Williams
|
09135cc594 |
mm, powerpc: use vma_kernel_pagesize() in vma_mmu_pagesize()
Patch series "mm, smaps: MMUPageSize for device-dax", v3.
Similar to commit
|
||
|
Mike Kravetz
|
63489f8e82 |
hugetlbfs: check for pgoff value overflow
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes:
|
||
|
Michal Hocko
|
4704dea36d |
hugetlb: fix surplus pages accounting
Dan Rue has noticed that libhugetlbfs test suite fails counter test:
# mount_point="/mnt/hugetlb/"
# echo 200 > /proc/sys/vm/nr_hugepages
# mkdir -p "${mount_point}"
# mount -t hugetlbfs hugetlbfs "${mount_point}"
# export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64
# /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters
Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319
Base pool size: 0
Clean...
FAIL Line 326: Bad HugePages_Total: expected 0, actual 1
The bug was bisected to
|
||
|
Michal Hocko
|
389c8178d0 |
hugetlb, mbind: fall back to default policy if vma is NULL
Dan Carpenter has noticed that mbind migration callback (new_page) can get a NULL vma pointer and choke on it inside alloc_huge_page_vma which relies on the VMA to get the hstate. We used to BUG_ON this case but the BUG_+ON has been removed recently by "hugetlb, mempolicy: fix the mbind hugetlb migration". The proper way to handle this is to get the hstate from the migrated page and rely on huge_node (resp. get_vma_policy) do the right thing with null VMA. We are currently falling back to the default mempolicy in that case which is in line what THP path is doing here. Link: http://lkml.kernel.org/r/20180110104712.GR1732@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
ebd6372358 |
hugetlb, mempolicy: fix the mbind hugetlb migration
do_mbind migration code relies on alloc_huge_page_noerr for hugetlb pages. alloc_huge_page_noerr uses alloc_huge_page which is a highlevel allocation function which has to take care of reserves, overcommit or hugetlb cgroup accounting. None of that is really required for the page migration because the new page is only temporal and either will replace the original page or it will be dropped. This is essentially as for other migration call paths and there shouldn't be any reason to handle mbind in a special way. The current implementation is even suboptimal because the migration might fail just because the hugetlb cgroup limit is reached, or the overcommit is saturated. Fix this by making mbind like other hugetlb migration paths. Add a new migration helper alloc_huge_page_vma as a wrapper around alloc_huge_page_nodemask with additional mempolicy handling. alloc_huge_page_noerr has no more users and it can go. Link: http://lkml.kernel.org/r/20180103093213.26329-7-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
0c397daea1 |
mm, hugetlb: further simplify hugetlb allocation API
Hugetlb allocator has several layer of allocation functions depending and the purpose of the allocation. There are two allocators depending on whether the page can be allocated from the page allocator or we need a contiguous allocator. This is currently opencoded in alloc_fresh_huge_page which is the only path that might allocate giga pages which require the later allocator. Create alloc_fresh_huge_page which hides this implementation detail and use it in all callers which hardcoded the buddy allocator path (__hugetlb_alloc_buddy_huge_page). This shouldn't introduce any funtional change because both migration and surplus allocators exlude giga pages explicitly. While we are at it let's do some renaming. The current scheme is not consistent and overly painfull to read and understand. Get rid of prefix underscores from most functions. There is no real reason to make names longer. * alloc_fresh_huge_page is the new layer to abstract underlying allocator * __hugetlb_alloc_buddy_huge_page becomes shorter and neater alloc_buddy_huge_page. * Former alloc_fresh_huge_page becomes alloc_pool_huge_page because we put the new page directly to the pool * alloc_surplus_huge_page can drop the opencoded prep_new_huge_page code as it uses alloc_fresh_huge_page now * others lose their excessive prefix underscores to make names shorter [dan.carpenter@oracle.com: fix double unlock bug in alloc_surplus_huge_page()] Link: http://lkml.kernel.org/r/20180109200559.g3iz5kvbdrz7yydp@mwanda Link: http://lkml.kernel.org/r/20180103093213.26329-6-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
9980d744a0 |
mm, hugetlb: get rid of surplus page accounting tricks
alloc_surplus_huge_page increases the pool size and the number of
surplus pages opportunistically to prevent from races with the pool size
change. See commit
|
||
|
Michal Hocko
|
ab5ac90aec |
mm, hugetlb: do not rely on overcommit limit during migration
hugepage migration relies on __alloc_buddy_huge_page to get a new page. This has 2 main disadvantages. 1) it doesn't allow to migrate any huge page if the pool is used completely which is not an exceptional case as the pool is static and unused memory is just wasted. 2) it leads to a weird semantic when migration between two numa nodes might increase the pool size of the destination NUMA node while the page is in use. The issue is caused by per NUMA node surplus pages tracking (see free_huge_page). Address both issues by changing the way how we allocate and account pages allocated for migration. Those should temporal by definition. So we mark them that way (we will abuse page flags in the 3rd page) and update free_huge_page to free such pages to the page allocator. Page migration path then just transfers the temporal status from the new page to the old one which will be freed on the last reference. The global surplus count will never change during this path but we still have to be careful when migrating a per-node suprlus page. This is now handled in move_hugetlb_state which is called from the migration path and it copies the hugetlb specific page state and fixes up the accounting when needed Rename __alloc_buddy_huge_page to __alloc_surplus_huge_page to better reflect its purpose. The new allocation routine for the migration path is __alloc_migrate_huge_page. The user visible effect of this patch is that migrated pages are really temporal and they travel between NUMA nodes as per the migration request: Before migration /sys/devices/system/node/node0/hugepages/hugepages-2048kB/free_hugepages:0 /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages:1 /sys/devices/system/node/node0/hugepages/hugepages-2048kB/surplus_hugepages:0 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/free_hugepages:0 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/surplus_hugepages:0 After /sys/devices/system/node/node0/hugepages/hugepages-2048kB/free_hugepages:0 /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node0/hugepages/hugepages-2048kB/surplus_hugepages:0 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/free_hugepages:0 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages:1 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/surplus_hugepages:0 with the previous implementation, both nodes would have nr_hugepages:1 until the page is freed. Link: http://lkml.kernel.org/r/20180103093213.26329-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
d9cc948f6f |
mm, hugetlb: integrate giga hugetlb more naturally to the allocation path
Gigantic hugetlb pages were ingrown to the hugetlb code as an alien specie with a lot of special casing. The allocation path is not an exception. Unnecessarily so to be honest. It is true that the underlying allocator is different but that is an implementation detail. This patch unifies the hugetlb allocation path that a prepares fresh pool pages. alloc_fresh_gigantic_page basically copies alloc_fresh_huge_page logic so we can move everything there. This will simplify set_max_huge_pages which doesn't have to care about what kind of huge page we allocate. Link: http://lkml.kernel.org/r/20180103093213.26329-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
af0fb9df78 |
mm, hugetlb: unify core page allocation accounting and initialization
Patch series "mm, hugetlb: allocation API and migration improvements" Motivation: this is a follow up for [3] for the allocation API and [4] for the hugetlb migration. It wasn't really easy to split those into two separate patch series as they share some code. My primary motivation to touch this code is to make the gigantic pages migration working. The giga pages allocation code is just too fragile and hacked into the hugetlb code now. This series tries to move giga pages closer to the first class citizen. We are not there yet but having 5 patches is quite a lot already and it will already make the code much easier to follow. I will come with other changes on top after this sees some review. The first two patches should be trivial to review. The third patch changes the way how we migrate huge pages. Newly allocated pages are a subject of the overcommit check and they participate surplus accounting which is quite unfortunate as the changelog explains. This patch doesn't change anything wrt. giga pages. Patch #4 removes the surplus accounting hack from __alloc_surplus_huge_page. I hope I didn't miss anything there and a deeper review is really due there. Patch #5 finally unifies allocation paths and giga pages shouldn't be any special anymore. There is also some renaming going on as well. This patch (of 6): hugetlb allocator has two entry points to the page allocator - alloc_fresh_huge_page_node - __hugetlb_alloc_buddy_huge_page The two differ very subtly in two aspects. The first one doesn't care about HTLB_BUDDY_* stats and it doesn't initialize the huge page. prep_new_huge_page is not used because it not only initializes hugetlb specific stuff but because it also put_page and releases the page to the hugetlb pool which is not what is required in some contexts. This makes things more complicated than necessary. Simplify things by a) removing the page allocator entry point duplicity and only keep __hugetlb_alloc_buddy_huge_page and b) make prep_new_huge_page more reusable by removing the put_page which moves the page to the allocator pool. All current callers are updated to call put_page explicitly. Later patches will add new callers which won't need it. This patch shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20180103093213.26329-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
d6cb41cc44 |
mm, hugetlb: remove hugepages_treat_as_movable sysctl
hugepages_treat_as_movable has been introduced by
|
||
|
Roman Gushchin
|
fcb2b0c577 |
mm: show total hugetlb memory consumption in /proc/meminfo
Currently we display some hugepage statistics (total, free, etc) in /proc/meminfo, but only for default hugepage size (e.g. 2Mb). If hugepages of different sizes are used (like 2Mb and 1Gb on x86-64), /proc/meminfo output can be confusing, as non-default sized hugepages are not reflected at all, and there are no signs that they are existing and consuming system memory. To solve this problem, let's display the total amount of memory, consumed by hugetlb pages of all sized (both free and used). Let's call it "Hugetlb", and display size in kB to match generic /proc/meminfo style. For example, (1024 2Mb pages and 2 1Gb pages are pre-allocated): $ cat /proc/meminfo MemTotal: 8168984 kB MemFree: 3789276 kB <...> CmaFree: 0 kB HugePages_Total: 1024 HugePages_Free: 1024 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 4194304 kB DirectMap4k: 32632 kB DirectMap2M: 4161536 kB DirectMap1G: 6291456 kB Also, this patch updates corresponding docs to reflect Hugetlb entry meaning and difference between Hugetlb and HugePages_Total * Hugepagesize. Link: http://lkml.kernel.org/r/20171115231409.12131-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kirill A. Shutemov
|
f4f0a3d85b |
mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine
I made a mistake during converting hugetlb code to 5-level paging: in
huge_pte_alloc() we have to use p4d_alloc(), not p4d_offset().
Otherwise it leads to crash -- NULL-pointer dereference in pud_alloc()
if p4d table is not yet allocated.
It only can happen in 5-level paging mode. In 4-level paging mode
p4d_offset() always returns pgd, so we are fine.
Link: http://lkml.kernel.org/r/20171122121921.64822-1-kirill.shutemov@linux.intel.com
Fixes:
|
||
|
Dan Williams
|
31383c6865 |
mm, hugetlbfs: introduce ->split() to vm_operations_struct
Patch series "device-dax: fix unaligned munmap handling"
When device-dax is operating in huge-page mode we want it to behave like
hugetlbfs and fail attempts to split vmas into unaligned ranges. It
would be messy to teach the munmap path about device-dax alignment
constraints in the same (hstate) way that hugetlbfs communicates this
constraint. Instead, these patches introduce a new ->split() vm
operation.
This patch (of 2):
The device-dax interface has similar constraints as hugetlbfs in that it
requires the munmap path to unmap in huge page aligned units. Rather
than add more custom vma handling code in __split_vma() introduce a new
vm operation to perform this vma specific check.
Link: http://lkml.kernel.org/r/151130418135.4029.6783191281930729710.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes:
|
||
|
Jérôme Glisse
|
0f10851ea4 |
mm/mmu_notifier: avoid double notification when it is useless
This patch only affects users of mmu_notifier->invalidate_range callback
which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ...
and it is an optimization for those users. Everyone else is unaffected
by it.
When clearing a pte/pmd we are given a choice to notify the event under
the page table lock (notify version of *_clear_flush helpers do call the
mmu_notifier_invalidate_range). But that notification is not necessary
in all cases.
This patch removes almost all cases where it is useless to have a call
to mmu_notifier_invalidate_range before
mmu_notifier_invalidate_range_end. It also adds documentation in all
those cases explaining why.
Below is a more in depth analysis of why this is fine to do this:
For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when
device use thing like ATS/PASID to get the IOMMU to walk the CPU page
table to access a process virtual address space). There is only 2 cases
when you need to notify those secondary TLB while holding page table
lock when clearing a pte/pmd:
A) page backing address is free before mmu_notifier_invalidate_range_end
B) a page table entry is updated to point to a new page (COW, write fault
on zero page, __replace_page(), ...)
Case A is obvious you do not want to take the risk for the device to write
to a page that might now be used by something completely different.
Case B is more subtle. For correctness it requires the following sequence
to happen:
- take page table lock
- clear page table entry and notify (pmd/pte_huge_clear_flush_notify())
- set page table entry to point to new page
If clearing the page table entry is not followed by a notify before setting
the new pte/pmd value then you can break memory model like C11 or C++11 for
the device.
Consider the following scenario (device use a feature similar to ATS/
PASID):
Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we
assume they are write protected for COW (other case of B apply too).
[Time N] -----------------------------------------------------------------
CPU-thread-0 {try to write to addrA}
CPU-thread-1 {try to write to addrB}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {read addrA and populate device TLB}
DEV-thread-2 {read addrB and populate device TLB}
[Time N+1] ---------------------------------------------------------------
CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}}
CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+2] ---------------------------------------------------------------
CPU-thread-0 {COW_step1: {update page table point to new page for addrA}}
CPU-thread-1 {COW_step1: {update page table point to new page for addrB}}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+3] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {preempted}
CPU-thread-2 {write to addrA which is a write to new page}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+3] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {preempted}
CPU-thread-2 {}
CPU-thread-3 {write to addrB which is a write to new page}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+4] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+5] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {read addrA from old page}
DEV-thread-2 {read addrB from new page}
So here because at time N+2 the clear page table entry was not pair with a
notification to invalidate the secondary TLB, the device see the new value
for addrB before seing the new value for addrA. This break total memory
ordering for the device.
When changing a pte to write protect or to point to a new write protected
page with same content (KSM) it is ok to delay invalidate_range callback
to mmu_notifier_invalidate_range_end() outside the page table lock. This
is true even if the thread doing page table update is preempted right
after releasing page table lock before calling
mmu_notifier_invalidate_range_end
Thanks to Andrea for thinking of a problematic scenario for COW.
[jglisse@redhat.com: v2]
Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Andrea Arcangeli
|
1e39214713 |
userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size
This oops:
kernel BUG at fs/hugetlbfs/inode.c:484!
RIP: remove_inode_hugepages+0x3d0/0x410
Call Trace:
hugetlbfs_setattr+0xd9/0x130
notify_change+0x292/0x410
do_truncate+0x65/0xa0
do_sys_ftruncate.constprop.3+0x11a/0x180
SyS_ftruncate+0xe/0x10
tracesys+0xd9/0xde
was caused by the lack of i_size check in hugetlb_mcopy_atomic_pte.
mmap() can still succeed beyond the end of the i_size after vmtruncate
zapped vmas in those ranges, but the faults must not succeed, and that
includes UFFDIO_COPY.
We could differentiate the retval to userland to represent a SIGBUS like
a page fault would do (vs SIGSEGV), but it doesn't seem very useful and
we'd need to pick a random retval as there's no meaningful syscall
retval that would differentiate from SIGSEGV and SIGBUS, there's just
-EFAULT.
Link: http://lkml.kernel.org/r/20171016223914.2421-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
bac65d9d87 |
powerpc updates for 4.14
Nothing really major this release, despite quite a lot of activity. Just lots of
things all over the place.
Some things of note include:
- Access via perf to a new type of PMU (IMC) on Power9, which can count both
core events as well as nest unit events (Memory controller etc).
- Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page
Walk Cache (PWC) flushes when the structure of the tree is not changing.
- Reworks/cleanups of do_page_fault() to modernise it and bring it closer to
other architectures where possible.
- Rework of our page table walking so that THP updates only need to send IPIs
to CPUs where the affected mm has run, rather than all CPUs.
- The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems.
This avoids problems with the percpu allocator on systems with very sparse
NUMA layouts.
- STRICT_KERNEL_RWX support on PPC32.
- A new sched domain topology for Power9, to capture the fact that pairs of
cores may share an L2 cache.
- Power9 support for VAS, which is a new mechanism for accessing coprocessors,
and initial support for using it with the NX compression accelerator.
- Major work on the instruction emulation support, adding support for many new
instructions, and reworking it so it can be used to implement the emulation
needed to fixup alignment faults.
- Support for guests under PowerVM to use the Power9 XIVE interrupt controller.
And probably that many things again that are almost as interesting, but I had to
keep the list short. Plus the usual fixes and cleanups as always.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju
T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal,
Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter,
Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand,
Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE
Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro
Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot,
Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica
Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood,
Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding,
Victor Aoqui.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UJtt
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Nothing really major this release, despite quite a lot of activity.
Just lots of things all over the place.
Some things of note include:
- Access via perf to a new type of PMU (IMC) on Power9, which can
count both core events as well as nest unit events (Memory
controller etc).
- Optimisations to the radix MMU TLB flushing, mostly to avoid
unnecessary Page Walk Cache (PWC) flushes when the structure of the
tree is not changing.
- Reworks/cleanups of do_page_fault() to modernise it and bring it
closer to other architectures where possible.
- Rework of our page table walking so that THP updates only need to
send IPIs to CPUs where the affected mm has run, rather than all
CPUs.
- The size of our vmalloc area is increased to 56T on 64-bit hash MMU
systems. This avoids problems with the percpu allocator on systems
with very sparse NUMA layouts.
- STRICT_KERNEL_RWX support on PPC32.
- A new sched domain topology for Power9, to capture the fact that
pairs of cores may share an L2 cache.
- Power9 support for VAS, which is a new mechanism for accessing
coprocessors, and initial support for using it with the NX
compression accelerator.
- Major work on the instruction emulation support, adding support for
many new instructions, and reworking it so it can be used to
implement the emulation needed to fixup alignment faults.
- Support for guests under PowerVM to use the Power9 XIVE interrupt
controller.
And probably that many things again that are almost as interesting,
but I had to keep the list short. Plus the usual fixes and cleanups as
always.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"
* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
powerpc/xive: Fix section __init warning
powerpc: Fix kernel crash in emulation of vector loads and stores
powerpc/xive: improve debugging macros
powerpc/xive: add XIVE Exploitation Mode to CAS
powerpc/xive: introduce H_INT_ESB hcall
powerpc/xive: add the HW IRQ number under xive_irq_data
powerpc/xive: introduce xive_esb_write()
powerpc/xive: rename xive_poke_esb() in xive_esb_read()
powerpc/xive: guest exploitation of the XIVE interrupt controller
powerpc/xive: introduce a common routine xive_queue_page_alloc()
powerpc/sstep: Avoid used uninitialized error
axonram: Return directly after a failed kzalloc() in axon_ram_probe()
axonram: Improve a size determination in axon_ram_probe()
axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
powerpc/powernv/npu: Move tlb flush before launching ATSD
powerpc/macintosh: constify wf_sensor_ops structures
powerpc/iommu: Use permission-specific DEVICE_ATTR variants
powerpc/eeh: Delete an error out of memory message at init time
powerpc/mm: Use seq_putc() in two functions
macintosh: Convert to using %pOF instead of full_name
...
|
||
|
Michal Hocko
|
79b63f12ab |
mm, hugetlb: do not allocate non-migrateable gigantic pages from movable zones
alloc_gigantic_page doesn't consider movability of the gigantic hugetlb
when scanning eligible ranges for the allocation. As 1GB hugetlb pages
are not movable currently this can break the movable zone assumption
that all allocations are migrateable and as such break memory hotplug.
Reorganize the code and use the standard zonelist allocations scheme
that we use for standard hugetbl pages. htlb_alloc_mask will ensure
that only migratable hugetlb pages will ever see a movable zone.
Link: http://lkml.kernel.org/r/20170803083549.21407-1-mhocko@kernel.org
Fixes:
|
||
|
Arvind Yadav
|
67e5ed9699 |
mm/hugetlb.c: constify attribute_group structures
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Link: http://lkml.kernel.org/r/1501157260-3922-1-git-send-email-arvind.yadav.cs@gmail.com Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Punit Agrawal
|
9b19df292c |
mm/hugetlb.c: make huge_pte_offset() consistent and document behaviour
When walking the page tables to resolve an address that points to !p*d_present() entry, huge_pte_offset() returns inconsistent values depending on the level of page table (PUD or PMD). It returns NULL in the case of a PUD entry while in the case of a PMD entry, it returns a pointer to the page table entry. A similar inconsitency exists when handling swap entries - returns NULL for a PUD entry while a pointer to the pte_t is retured for the PMD entry. Update huge_pte_offset() to make the behaviour consistent - return a pointer to the pte_t for hugepage or swap entries. Only return NULL in instances where we have a p*d_none() entry and the size parameter doesn't match the hugepage size at this level of the page table. Document the behaviour to clarify the expected behaviour of this function. This is to set clear semantics for architecture specific implementations of huge_pte_offset(). Discussions on the arm64 implementation of huge_pte_offset() (http://www.spinics.net/lists/linux-mm/msg133699.html) showed that there is benefit from returning a pte_t* in the case of p*d_none(). The fault handling code in hugetlb_fault() can handle p*d_none() entries and saves an extra round trip to huge_pte_alloc(). Other callers of huge_pte_offset() should be ok as well. [punit.agrawal@arm.com: v2] Link: http://lkml.kernel.org/r/20170725154114.24131-2-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Aneesh Kumar K.V
|
e24a1307ba |
mm/hugetlb: Allow arch to override and call the weak function
When running in guest mode ppc64 supports a different mechanism for hugetlb allocation/reservation. The LPAR management application called HMC can be used to reserve a set of hugepages and we pass the details of reserved pages via device tree to the guest. (more details in htab_dt_scan_hugepage_blocks()) . We do the memblock_reserve of the range and later in the boot sequence, we add the reserved range to huge_boot_pages. But to enable 16G hugetlb on baremetal config (when we are not running as guest) we want to do memblock reservation during boot. Generic code already does this Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|
Andrea Arcangeli
|
5af10dfd0a |
userfaultfd: hugetlbfs: remove superfluous page unlock in VM_SHARED case
huge_add_to_page_cache->add_to_page_cache implicitly unlocks the page before returning in case of errors. The error returned was -EEXIST by running UFFDIO_COPY on a non-hole offset of a VM_SHARED hugetlbfs mapping. It was an userland bug that triggered it and the kernel must cope with it returning -EEXIST from ioctl(UFFDIO_COPY) as expected. page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) kernel BUG at mm/filemap.c:964! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 22582 Comm: qemu-system-x86 Not tainted 4.11.11-300.fc26.x86_64 #1 RIP: unlock_page+0x4a/0x50 Call Trace: hugetlb_mcopy_atomic_pte+0xc0/0x320 mcopy_atomic+0x96f/0xbe0 userfaultfd_ioctl+0x218/0xe90 do_vfs_ioctl+0xa5/0x600 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa9 Link: http://lkml.kernel.org/r/20170802165145.22628-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Daniel Jordan
|
2be7cfed99 |
mm/hugetlb.c: __get_user_pages ignores certain follow_hugetlb_page errors
Commit |
||
|
Michal Hocko
|
dcda9b0471 |
mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to the page allocator. This has been true but only for allocations requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always ignored for smaller sizes. This is a bit unfortunate because there is no way to express the same semantic for those requests and they are considered too important to fail so they might end up looping in the page allocator for ever, similarly to GFP_NOFAIL requests. Now that the whole tree has been cleaned up and accidental or misled usage of __GFP_REPEAT flag has been removed for !costly requests we can give the original flag a better name and more importantly a more useful semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user that the allocator would try really hard but there is no promise of a success. This will work independent of the order and overrides the default allocator behavior. Page allocator users have several levels of guarantee vs. cost options (take GFP_KERNEL as an example) - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_ attempt to free memory at all. The most light weight mode which even doesn't kick the background reclaim. Should be used carefully because it might deplete the memory and the next user might hit the more aggressive reclaim - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic allocation without any attempt to free memory from the current context but can wake kswapd to reclaim memory if the zone is below the low watermark. Can be used from either atomic contexts or when the request is a performance optimization and there is another fallback for a slow path. - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) - non sleeping allocation with an expensive fallback so it can access some portion of memory reserves. Usually used from interrupt/bh context with an expensive slow path fallback. - GFP_KERNEL - both background and direct reclaim are allowed and the _default_ page allocator behavior is used. That means that !costly allocation requests are basically nofail but there is no guarantee of that behavior so failures have to be checked properly by callers (e.g. OOM killer victim is allowed to fail currently). - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior and all allocation requests fail early rather than cause disruptive reclaim (one round of reclaim in this implementation). The OOM killer is not invoked. - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator behavior and all allocation requests try really hard. The request will fail if the reclaim cannot make any progress. The OOM killer won't be triggered. - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior and all allocation requests will loop endlessly until they succeed. This might be really dangerous especially for larger orders. Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL because they already had their semantic. No new users are added. __alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if there is no progress and we have already passed the OOM point. This means that all the reclaim opportunities have been exhausted except the most disruptive one (the OOM killer) and a user defined fallback behavior is more sensible than keep retrying in the page allocator. [akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c] [mhocko@suse.com: semantic fix] Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz [mhocko@kernel.org: address other thing spotted by Vlastimil] Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Belits <alex.belits@cavium.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David Daney <david.daney@cavium.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: NeilBrown <neilb@suse.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
3e59fcb0e8 |
hugetlb: add support for preferred node to alloc_huge_page_nodemask
alloc_huge_page_nodemask tries to allocate from any numa node in the allowed node mask starting from lower numa nodes. This might lead to filling up those low NUMA nodes while others are not used. We can reduce this risk by introducing a concept of the preferred node similar to what we have in the regular page allocator. We will start allocating from the preferred nid and then iterate over all allowed nodes in the zonelist order until we try them all. This is mimicing the page allocator logic except it operates on per-node mempools. dequeue_huge_page_vma already does this so distill the zonelist logic into a more generic dequeue_huge_page_nodemask and use it in alloc_huge_page_nodemask. This will allow us to use proper per numa distance fallback also for alloc_huge_page_node which can use alloc_huge_page_nodemask now and we can get rid of alloc_huge_page_node helper which doesn't have any user anymore. Link: http://lkml.kernel.org/r/20170622193034.28972-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
aaf14e40a3 |
mm, hugetlb: unclutter hugetlb allocation layers
Patch series "mm, hugetlb: allow proper node fallback dequeue". While working on a hugetlb migration issue addressed in a separate patchset[1] I have noticed that the hugetlb allocations from the preallocated pool are quite subotimal. [1] //lkml.kernel.org/r/20170608074553.22152-1-mhocko@kernel.org There is no fallback mechanism implemented and no notion of preferred node. I have tried to work around it but Vlastimil was right to push back for a more robust solution. It seems that such a solution is to reuse zonelist approach we use for the page alloctor. This series has 3 patches. The first one tries to make hugetlb allocation layers more clear. The second one implements the zonelist hugetlb pool allocation and introduces a preferred node semantic which is used by the migration callbacks. The last patch is a clean up. This patch (of 3): Hugetlb allocation path for fresh huge pages is unnecessarily complex and it mixes different interfaces between layers. __alloc_buddy_huge_page is the central place to perform a new allocation. It checks for the hugetlb overcommit and then relies on __hugetlb_alloc_buddy_huge_page to invoke the page allocator. This is all good except that __alloc_buddy_huge_page pushes vma and address down the callchain and so __hugetlb_alloc_buddy_huge_page has to deal with two different allocation modes - one for memory policy and other node specific (or to make it more obscure node non-specific) requests. This just screams for a reorganization. This patch pulls out all the vma specific handling up to __alloc_buddy_huge_page_with_mpol where it belongs. __alloc_buddy_huge_page will get nodemask argument and __hugetlb_alloc_buddy_huge_page will become a trivial wrapper over the page allocator. In short: __alloc_buddy_huge_page_with_mpol - memory policy handling __alloc_buddy_huge_page - overcommit handling and accounting __hugetlb_alloc_buddy_huge_page - page allocator layer Also note that __hugetlb_alloc_buddy_huge_page and its cpuset retry loop is not really needed because the page allocator already handles the cpusets update. Finally __hugetlb_alloc_buddy_huge_page had a special case for node specific allocations (when no policy is applied and there is a node given). This has relied on __GFP_THISNODE to not fallback to a different node. alloc_huge_page_node is the only caller which relies on this behavior so move the __GFP_THISNODE there. Not only does this remove quite some code it also should make those layers easier to follow and clear wrt responsibilities. Link: http://lkml.kernel.org/r/20170622193034.28972-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox
|
c6247f72d4 |
mm/hugetlb.c: replace memfmt with string_get_size
The hugetlb code has its own function to report human-readable sizes. Convert it to use the shared string_get_size() function. This will lead to a minor difference in user visible output (MiB/GiB instead of MB/GB), but some would argue that's desirable anyway. Link: http://lkml.kernel.org/r/20170606190350.GA20010@bombadil.infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Rientjes
|
69ed779a14 |
mm, hugetlb: schedule when potentially allocating many hugepages
A few hugetlb allocators loop while calling the page allocator and can potentially prevent rescheduling if the page allocator slowpath is not utilized. Conditionally schedule when large numbers of hugepages can be allocated. Anshuman: "Fixes a task which was getting hung while writing like 10000 hugepages (16MB on POWER8) into /proc/sys/vm/nr_hugepages." Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706091535300.66176@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
4db9b2efe9 |
hugetlb, memory_hotplug: prefer to use reserved pages for migration
new_node_page will try to use the origin's next NUMA node as the migration destination for hugetlb pages. If such a node doesn't have any preallocated pool it falls back to __alloc_buddy_huge_page_no_mpol to allocate a surplus page instead. This is quite subotpimal for any configuration when hugetlb pages are no distributed to all NUMA nodes evenly. Say we have a hotplugable node 4 and spare hugetlb pages are node 0 /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages:10000 /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node4/hugepages/hugepages-2048kB/nr_hugepages:10000 /sys/devices/system/node/node5/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node6/hugepages/hugepages-2048kB/nr_hugepages:0 /sys/devices/system/node/node7/hugepages/hugepages-2048kB/nr_hugepages:0 Now we consume the whole pool on node 4 and try to offline this node. All the allocated pages should be moved to node0 which has enough preallocated pages to hold them. With the current implementation offlining very likely fails because hugetlb allocations during runtime are much less reliable. Fix this by reusing the nodemask which excludes migration source and try to find a first node which has a page in the preallocated pool first and fall back to __alloc_buddy_huge_page_no_mpol only when the whole pool is consumed. [akpm@linux-foundation.org: remove bogus arg from alloc_huge_page_nodemask() stub] Link: http://lkml.kernel.org/r/20170608074553.22152-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Liam R. Howlett
|
d715cf804a |
mm/hugetlb.c: warn the user when issues arise on boot due to hugepages
When the user specifies too many hugepages or an invalid default_hugepagesz the communication to the user is implicit in the allocation message. This patch adds a warning when the desired page count is not allocated and prints an error when the default_hugepagesz is invalid on boot. During boot hugepages will allocate until there is a fraction of the hugepage size left. That is, we allocate until either the request is satisfied or memory for the pages is exhausted. When memory for the pages is exhausted, it will most likely lead to the system failing with the OOM manager not finding enough (or anything) to kill (unless you're using really big hugepages in the order of 100s of MB or in the GBs). The user will most likely see the OOM messages much later in the boot sequence than the implicitly stated message. Worse yet, you may even get an OOM for each processor which causes many pages of OOMs on modern systems. Although these messages will be printed earlier than the OOM messages, at least giving the user errors and warnings will highlight the configuration as an issue. I'm trying to point the user in the right direction by providing a more robust statement of what is failing. During the sysctl or echo command, the user can check the results much easier than if the system hangs during boot and the scenario of having nothing to OOM for kernel memory is highly unlikely. Mike said: "Before sending out this patch, I asked Liam off list why he was doing it. Was it something he just thought would be useful? Or, was there some type of user situation/need. He said that he had been called in to assist on several occasions when a system OOMed during boot. In almost all of these situations, the user had grossly misconfigured huge pages. DB users want to pre-allocate just the right amount of huge pages, but sometimes they can be really off. In such situations, the huge page init code just allocates as many huge pages as it can and reports the number allocated. There is no indication that it quit allocating because it ran out of memory. Of course, a user could compare the number in the message to what they requested on the command line to determine if they got all the huge pages they requested. The thought was that it would be useful to at least flag this situation. That way, the user might be able to better relate the huge page allocation failure to the OOM. I'm not sure if the e-mail discussion made it obvious that this is something he has seen on several occasions. I see Michal's point that this will only flag the situation where someone configures huge pages very badly. And, a more extensive look at the situation of misconfiguring huge pages might be in order. But, this has happened on several occasions which led to the creation of this patch" [akpm@linux-foundation.org: reposition memfmt() to avoid forward declaration] Link: http://lkml.kernel.org/r/20170603005413.10380-1-Liam.Howlett@Oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: zhongjiang <zhongjiang@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
ddd40d8a2c |
mm: hugetlb: delete dequeue_hwpoisoned_huge_page()
dequeue_hwpoisoned_huge_page() is no longer used, so let's remove it. Link: http://lkml.kernel.org/r/1496305019-5493-9-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Anshuman Khandual
|
c3114a84f7 |
mm: hugetlb: soft-offline: dissolve source hugepage after successful migration
Currently hugepage migrated by soft-offline (i.e. due to correctable memory errors) is contained as a hugepage, which means many non-error pages in it are unreusable, i.e. wasted. This patch solves this issue by dissolving source hugepages into buddy. As done in previous patch, PageHWPoison is set only on a head page of the error hugepage. Then in dissoliving we move the PageHWPoison flag to the raw error page so that all healthy subpages return back to buddy. [arnd@arndb.de: fix warnings: replace some macros with inline functions] Link: http://lkml.kernel.org/r/20170609102544.2947326-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1496305019-5493-5-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
243abd5b78 |
mm: hugetlb: prevent reuse of hwpoisoned free hugepages
Patch series "mm: hwpoison: fixlet for hugetlb migration". This patchset updates the hwpoison/hugetlb code to address 2 reported issues. One is madvise(MADV_HWPOISON) failure reported by Intel's lkp robot (see http://lkml.kernel.org/r/20170417055948.GM31394@yexl-desktop.) First half was already fixed in mainline, and another half about hugetlb cases are solved in this series. Another issue is "narrow-down error affected region into a single 4kB page instead of a whole hugetlb page" issue, which was tried by Anshuman (http://lkml.kernel.org/r/20170420110627.12307-1-khandual@linux.vnet.ibm.com) and I updated it to apply it more widely. This patch (of 9): We no longer use MIGRATE_ISOLATE to prevent reuse of hwpoison hugepages as we did before. So current dequeue_huge_page_node() doesn't work as intended because it still uses is_migrate_isolate_page() for this check. This patch fixes it with PageHWPoison flag. Link: http://lkml.kernel.org/r/1496305019-5493-2-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
04ec6264f2 |
mm, page_alloc: pass preferred nid instead of zonelist to allocator
The main allocator function __alloc_pages_nodemask() takes a zonelist pointer as one of its parameters. All of its callers directly or indirectly obtain the zonelist via node_zonelist() using a preferred node id and gfp_mask. We can make the code a bit simpler by doing the zonelist lookup in __alloc_pages_nodemask(), passing it a preferred node id instead (gfp_mask is already another parameter). There are some code size benefits thanks to removal of inlined node_zonelist(): bloat-o-meter add/remove: 2/2 grow/shrink: 4/36 up/down: 399/-1351 (-952) This will also make things simpler if we proceed with converting cpusets to zonelists. Link: http://lkml.kernel.org/r/20170517081140.30654-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Christoph Lameter <cl@linux.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |