Some of the functions (like cdn_dp_dpcd_read, cdn_dp_get_edid_block)
allow to read 64KiB, but the cdn_dp_mailbox_read_receive, that is
used by them, can read only up to 255 bytes at once. Normally, it's
not a big issue as DPCD or EDID reads won't (hopefully) exceed that
value.
The real issue here is the revocation list read during the HDCP
authentication process. (problematic use case:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/rockchip/cdn-dp-reg.c#1152)
The list can reach 127*5+4 bytes (num devs * 5 bytes per ID/Bksv +
4 bytes of an additional info).
In other words - CTSes with HDCP Repeater won't pass without this
fix. Oh, and the driver will most likely stop working (best case
scenario).
Signed-off-by: Damian Kos <dkos@cadence.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1541518625-25984-1-git-send-email-dkos@cadence.com
Add the Rockchip-sepcific dual-dsi setup and hook it into the VOP as well.
As described in the general dual-dsi devicetree binding, the panel should
define two input ports and point each of them to one of the used dsi-
controllers, as well as declare one of them as clock-master.
This is used to determine the dual-dsi state and get access to both
controller instances.
v6:
handle master+slave component in dsi-attach
v5:
use driver-internal mechanism to find dual dsi slave
v4:
add component directly in probe when adding empty dsi slave controller
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-8-heiko@sntech.de
Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge and remove the old separate one.
changes:
v2:
add err_pllref, remove unnecessary encoder.enable & disable
correct spelling mistakes
v3:
call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind()
fix typo, use of_device_get_match_data(),
change some bind() logic into probe()
add 'dev_set_drvdata()'
v4:
return -EINVAL when can not get best_freq
add a clarifying comment when get vco
add review tag
v5:
keep our power domain enabled while touching GRF
v6:
change func name dw_mipi_encoder_disable to
dw_mipi_dsi_encoder_disable
v7:
none
v8: Heiko
add Archit's Review tag
adapt to recent changes in the original rockchip-dsi driver
beautify grf-handling
split hw-setup (resources, dsi-host) from bind into probe
v2-new: Heiko
add SPDX header instead of license blurb
drop old versioning to not confuse people
v3-new: Heiko
include ordering
moved hwaccess from mode_set to enable callback
move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
v4-new: Heiko
rebase against recent rockchip-dsi changes
move to call component_add in the new glue host-attach
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-6-heiko@sntech.de
'encoder' is dereferenced before it is null sanity checked, hence we
potentially have a null pointer dereference bug. Instead, initialise
drm_drv from encoder->dev->dev_private after we are sure 'encoder' is
not null.
Fixes: 5182c1a556 ("drm/rockchip: add an common abstracted PSR driver")
Cc: stable@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com
The rk3328 uses a dw-hdmi controller with an external hdmi phy from
Innosilicon which uses the generic phy framework for access.
Add the necessary data and the compatible for the rk3328 to the
rockchip dw-hdmi driver.
changes in v5:
- disable CEC_5V option to make CEC actually work (Jonas)
changes in v3:
- reword as suggested by Rob to show that it's a dw-hdmi + Inno phy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de
When using special phy handling operations we'll often need access to
the rockchip_hdmi struct.
As the chip-data that occupies the phy_data pointer initially gets
assigned to the rockchip_hdmi struct, we can now re-use this phy_data
pointer to hold the reference to the rockchip_hdmi struct and use this
reference later on.
Inspiration for this comes from meson and sunxi dw-hdmi, which are using
the same method.
changes in v3:
- reword commit message
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-6-heiko@sntech.de
Some variants of the dw-hdmi on Rockchip socs use a separate phy block
accessed via the generic phy framework, so allow them to be included
if such a phy reference is found.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-5-heiko@sntech.de
So far we always encountered socs with 2 output crtcs needing the driver
to tell the hdmi block which output to connect to. But there also exist
socs with only one crtc like the rk3228, rk3328 and rk3368.
So adapt the register field to simply carry a negative value to signal
that no output-switching is necessary.
changes in v3:
- fixed wording issue found by Robin Murphy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de
The hs_start interrupt on rk3188 fires at the start of a new frame, so
serves essentially the same purpose as the dsp_hold_valid irq in checking
when the last frame got delivered when going to standby. So define it
to fix a hang on atomic_disable of the vop because the completion never
really completed before.
Fixes: 428e15cc41 ("drm/rockchip: vop: add rk3188 vop definitions")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180923123730.14706-1-heiko@sntech.de
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
The newly added internal rgb encoder for Rockchip vops is missing
stubs for the case that the rgb output part is not enabled in the
kernel config. So add these.
Fixes: 1f0f015151 (drm/rockchip: Add support for Rockchip Soc RGB output interface)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul fixed up checkpatch nits]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905191302.26023-1-heiko@sntech.de
The rk3188 has 2 vops not using iommus which only output directly
to a rgb interface per vop. So all other output modes like hdmi
are provided by external brige chips.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830110937.1739-1-heiko@sntech.de
Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel
and serial RGB data to panel or conversion chip.
So add a feature-bit for vops to mark the ability for these direct
outputs and add an internal encoder in that case, that can attach to
bridge chipsor panels.
Changes in v7:
1. forget to delete rockchip_rgb_driver and delete it.
Changes in v6:
1. Update according to Heiko Stuebner' implemention, rgb output is
part of vop's feature, should not register as a independent
driver.
Changes in v5:
1. add SPDX-License-Identifier tag
Changes in v4:
1. add support px30;
Changes in v3:
1. update for rgb-mode move to panel node.
Changes in v2:
1. add error log when probe failed;
2. update name_to_output_mode() according to sean's suggest;
3. Fix uninitialized use of ret.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-3-heiko@sntech.de
To be able to have both internal subdrivers and external bridge
drivers as output endpoints of vops, add a function to be able
to distinguish these.
changes in v8:
- improved function documentation
- better error handling
- put calls for node and pdev references
changes in v6:
- added function to check subdriver vs. bridge
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-2-heiko@sntech.de
1. interrupt register define error lead to enable interrupt failed;
2. px30 unsupport hdmi output;
3. there are some hardware designed bug, we must swap win2 gate and
enable offset, otherwise will appear vop iommu pagefault.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1535445150-40296-1-git-send-email-hjc@rock-chips.com
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
or, like in this particular case:
size = sizeof(struct foo) + sizeof(void *) * count;
instance = devm_kzalloc(dev, size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count),
GFP_KERNEL);
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180826184712.GA9330@embeddedor.com
This patch make changes to allocate crc-entries buffer before
enabling CRC generation.
It moves all the failure check early in the function before setting
the source or memory allocation.
Now set_crc_source takes only two variable inputs, values_cnt we
already gets as part of verify_crc_source.
Changes since V1:
- refactor code to use single spin lock
Changes since V2:
- rebase
Changes since V3:
- rebase on top of VKMS driver
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Leo Li <sunpeng.li@amd.com> (V2)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (V3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-3-mahesh1.kumar@intel.com
PX30 have vop big and vop lite, just like rk3036 and rk3126
the max input and output resolution is 1920x1080, the main
difference between the two vop is:
vop big:
win0 support yuv and rgb format;
win1 and win2 support rgb format;
vop lit:
win1 support rgb format;
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1530003215-46593-3-git-send-email-hjc@rock-chips.com
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
With this conversion, rockchip_drm_fb_resume() and
rockchip_drm_fb_suspend() will not be used anymore.
Both of these functions can be removed.
Also, in struct rockchip_drm_private state will not be
used anymore. So this can be removed forever.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Co-Developed-by: Ajit Negi <ajitn.linux@gmail.com>
[changed to Co-Developed-by, according to process/submitting-patches.rst]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731203430.GA30136@jordon-HP-15-Notebook-PC
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717110927.30776-1-tzimmermann@suse.de
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
The vop irq is shared between vop and iommu and irq probing in the
iommu driver moved to the probe function recently. This can in some
cases lead to a stall if the irq is triggered while the vop driver
still has it disabled, but the vop irq handler gets called.
But there is no real need to disable the irq, as the vop can simply
also track its enabled state and ignore irqs in that case.
For this we can simply check the power-domain state of the vop,
similar to how the iommu driver does it.
So remove the enable/disable handling and add appropriate condition
to the irq handler.
changes in v2:
- move to just check the power-domain state
- add clock handling
changes in v3:
- clarify comment to speak of runtime-pm not power-domain
changes in v4:
- address Marc's comments (clk-enable WARN_ON and style improvement)
Fixes: d0b912bd4c ("iommu/rockchip: Request irqs in rk_iommu_probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-3-heiko@sntech.de
Judging from the iommu code, both the hclk and aclk are necessary for
register access. Split them off into separate functions from the regular
vop enablement, so that we can use them elsewhere as well.
Fixes: d0b912bd4c ("iommu/rockchip: Request irqs in rk_iommu_probe()")
[prerequisite change for the actual fix]
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-2-heiko@sntech.de
We use jitter bypass mode for spdif, so do not need to set jitter mode
related bit in SPDIF_CTRL_ADDR register. But of course we need to keep
the SPDIF_ENABLE bit.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1526979222-32478-1-git-send-email-hl@rock-chips.com
The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: stable@vger.kernel.org
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1527102436-13447-6-git-send-email-Julia.Lawall@lip6.fr
Now that rockchip_drm_fb is just a wrapper around drm_framebuffer, we
can remove it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Heiko Stübner <heiko@sntech.de>
Tested-by: Heiko Stübner <heiko@sntech.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-5-daniels@collabora.com
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Heiko Stübner <heiko@sntech.de>
Tested-by: Heiko Stübner <heiko@sntech.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-4-daniels@collabora.com
Blending win0 with the background color doesn't seem to work
correctly. We only get the background color, no matter the contents of
the win0 framebuffer. However, blending pre-multiplied color with the
default opaque black default background color is a no-op, so we can
just disable blending to get the correct result.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418173152.93246-1-hoegsberg@chromium.org
It is not used anymore after last changes and it was not even correct to
begin with as it assumed a 1:1 relation between a CRTC and encoder,
while in fact a CRTC can be attached to multiple encoders.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
Currently PSR flush is triggered from CRTC's .atomic_begin() callback,
which is executed after modeset disables and enables and before plane
updates are committed. Since PSR flush and re-enable can be triggered
asynchronously by external sources (input event, delayed work), it can
race with hardware programming done in the aforementioned stages.
This patch blocks the PSR completely before hardware programming part
begins and unblock after it ends. This relies on reference counted PSR
disable introduced with previous patch.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
Currently both rockchip_drm_psr_activate() and _deactivate() only set the
boolean "active" flag without actually making sure that hardware state
complies with it.
Since we are going to extend the usage of this API to properly lock PSR
for the duration of atomic commits, we change the semantics in following
way:
- a counter is used to track the number of inhibit requests,
- PSR is actually disabled in hardware on first inhibit request,
- PSR enable work is scheduled on last allow request.
The above allows using the API as a way to deterministically synchronize
PSR state changes with other DRM events, i.e. atomic commits and cursor
updates. As a nice side effect, the naming is sorted out and we have
"inhibit" for stopping the software logic and "enable" for hardware
state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
The first time after we call rockchip_drm_do_flush() after
rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The
difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a
delayed work pending - PSR is off in either state. However
psr_set_state() only catches the transition from PSR_FLUSH to
PSR_DISABLE (which never happens), while going from PSR_DISABLE to
PSR_FLUSH triggers a call to psr->set() to disable PSR while it's
already disabled. This triggers the eDP PHY power-on sequence without
being shut down first and this seems to occasionally leave the encoder
unable to later enable PSR. Let's just simplify the state machine and
simply consider PSR_DISABLE and PSR_FLUSH the same state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com
Driver callbacks, such as system suspend or resume can be called any
time, specifically they can be called before the component bind
callback. Let's use dp->adp pointer as a safeguard and skip calling
Analogix entry points if it is an ERR_PTR().
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com
Some of the platform-specific stuff in rockchip_dp_poweron() needs to
happen before the generic code. Some needs to happen after. Let's
split the callback in two.
Specifically we can't start doing PSR work until _after_ the whole
controller is up, so don't set the enable until the end.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[seanpaul added exynos change]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com
Some encoder have a crc verification check, crc check fail if
input and output data is not equal.
That means encoder input and output need use same color depth,
vop can output 10bit data to encoder, but some panel only support
8bit depth, that would make crc check die.
So pre dither down vop data to 8bit if panel's bpc is 8.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict in rockchip_drm_vop.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com
If we failed disable psr, it would hang the display until next psr
cycle coming. So we should restore psr->state when it failed.
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-14-enric.balletbo@collabora.com
We have seen a case of a bad reference count for vblanks with the
Rockchip VOP:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 383 at drivers/gpu/drm/drm_irq.c:1198 drm_vblank_put+0x40/0xcc
Modules linked in: brcmfmac brcmutil
CPU: 1 PID: 383 Comm: kworker/u8:2 Not tainted 4.9.75-rt60 #1
Hardware name: Rockchip (Device Tree)
Workqueue: events_unbound flip_worker
Backtrace:
[<c010b7b0>] (dump_backtrace) from [<c010ba4c>] (show_stack+0x18/0x1c)
r7:c0b1b13c r6:600b0013 r5:00000000 r4:c0b1b13c
[<c010ba34>] (show_stack) from [<c032d248>] (dump_stack+0x78/0x94)
[<c032d1d0>] (dump_stack) from [<c011e6e8>] (__warn+0xe4/0x104)
r7:00000009 r6:c03cf26c r5:00000000 r4:00000000
[<c011e604>] (__warn) from [<c011e7c0>] (warn_slowpath_null+0x28/0x30)
r9:eeb443a0 r8:eeb443c8 r7:ee8a5ec0 r6:ee8a5ec0 r5:edb47f00 r4:ee096200
[<c011e798>] (warn_slowpath_null) from [<c03cf26c>] (drm_vblank_put+0x40/0xcc)
[<c03cf22c>] (drm_vblank_put) from [<c03cf310>] (drm_crtc_vblank_put+0x18/0x1c)
r5:edb47f00 r4:ee3c8a80
[<c03cf2f8>] (drm_crtc_vblank_put) from [<c03ef9b4>] (vop_fb_unref_worker+0x18/0x24)
[<c03ef99c>] (vop_fb_unref_worker) from [<c03df194>] (flip_worker+0x98/0xb4)
r5:edb47f00 r4:eeb443a8
[<c03df0fc>] (flip_worker) from [<c0134808>] (process_one_work+0x1a8/0x2fc)
r9:00000000 r8:ee807d00 r7:00000000 r6:ee809c00 r5:eeb443a8 r4:edfe5f80
[<c0134660>] (process_one_work) from [<c01358ec>] (worker_thread+0x2ac/0x458)
r10:00000088 r9:edfe5f98 r8:ee809c2c r7:c0b04100 r6:ee809c00 r5:ee809c00
r4:edfe5f80
[<c0135640>] (worker_thread) from [<c013a0bc>] (kthread+0xfc/0x10c)
r10:00000000 r9:00000000 r8:c0135640 r7:edfe5f80 r6:00000000 r5:edf0e240
r4:ee8a4000 r3:ed194e00
[<c0139fc0>] (kthread) from [<c0107cb8>] (ret_from_fork+0x14/0x3c)
r8:00000000 r7:00000000 r6:00000000 r5:c0139fc0 r4:edf0e240
---[ end trace 0000000000000002 ]---
It seems that this is caused by unfortunate timing between
vop_crtc_atomic_flush() and vop_handle_vblank() given the following
ordering:
atomic_flush handle_vblank
------------ -------------
drm_flip_work_queue
set_bit
if (test_and_clear_bit(...))
drm_flip_work_commit
drm_vblank_get
This results in vop_fb_unref_worker (called as flip work) decrementing
the vblank refcount before it has been incremented.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sandy huang <hjc@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328160351.23763-1-john@metanate.com
There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence
only one PHY can connect to DP controller at one time, the other should
be disconnected. The GRF_SOC_CON26 register has a switch bit to do it,
set this bit means enable PHY 1, clear this bit means enable PHY 0.
If the board has 2 Type-C ports, the DP driver get the phy id from
devm_of_phy_get_by_index, and then control this switch according to
this id. But some others board only has one Type-C port, it may be PHY 0
or PHY 1. The dts node id can not tell us the correct PHY id. Hence move
this switch to PHY driver, the PHY driver can distinguish between PHY 0
and PHY 1, and then write the correct register bit.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[The phy-changes are in the phy-tree now and the cdn-dp wasn't
enabled at all so far, so this change can go through drm-misc
alone without causing issues when testing drm-misc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180216120956.19034-6-enric.balletbo@collabora.com
The rockchip DRM driver is quite careful to disable interrupts
when taking a lock that is also taken in interrupt context,
which is a good thing.
What is a bit over the top is to use spin_lock_irqsave when
already in interrupt context, as you cannot take another
interrupt again, and disabling interrupt is just pure
overhead.
Switching to the non _irqsave version in interrupt context is
more logical, and less heavy handed.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-4-marc.zyngier@arm.com
memcpy is only meant to be used for memory, and only that.
MMIO accessors should be used to access MMIO regions, preferably
the ones that correspond to the size of the register accessed.
Let's convert the bulk register copy to writel/readl_relaxed,
which is the correct API.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-3-marc.zyngier@arm.com
