AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-14 11:56:47 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
468,210 Commits 1 Branch 0 Tags 2 GiB
ea2fdf8423
Commit Graph

41534 Commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz
ea2fdf8423 usb: phy: samsung: remove old common USB PHY code 
drivers/usb/phy/phy-samsung-usb[2,3] drivers got replaced by
drivers/phy/phy-samsung-usb[2,3] ones and the old common Samsung
USB PHY code is no longer used.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
 2014-09-02 09:16:44 -05:00
Paul Zimmerman
8913dc0bb9 usb: gadget: document a usb_ep_dequeue() requirement 
Document the requirement that the request be dequeued and its
completion routine called before usb_ep_dequeue() returns. Also
fix some capitalization issues in the existing text.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
 2014-08-21 16:13:52 -05:00
Linus Torvalds
2f39691f31 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 
Pull input layer fixes from Dmitry Torokhov:
 "Second round of updates for the input subsystem.  Mostly small fixups
  to the code merged in the first round (atmel_mxt_ts, wacom) but also a
  smallish patch to xbox driver to support Xbox One controllers and a
  patch to better handle Synaptics profile sensors found in Cr-48
  Chromebooks that should not affect any other devices"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: edt-ft5x06 - remove superfluous assignment
  Input: xpad - add support for Xbox One controllers
  Input: atmel_mxt_ts - fix a few issues reported by Coverity
  Input: atmel_mxt_ts - split config update a bit
  Input: atmel_mxt_ts - simplify mxt_initialize a bit
  Input: joystick - use get_cycles on ARMv8
  Input: wacom - fix compiler warning if !CONFIG_PM
  Input: cap1106 - allow changing key mapping from userspace
  Input: synaptics - use firmware data for Cr-48
  Input: synaptics - properly initialize slots for semi-MT
  Input: MT - make slot cleanup callable outside mt_sync_frame()
  Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AA
 2014-08-15 18:16:28 -06:00
Linus Torvalds
68ffeca4f4 Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac 
Pull EDAC updates from Mauro Carvalho Chehab.

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: add support for Haswell based systems
  sb_edac: Fix mix tab/spaces alignments
  edac: add DDR4 and RDDR4
  sb_edac: remove bogus assumption on mc ordering
  sb_edac: make minimal use of channel_mask
  sb_edac: fix socket detection on Ivy Bridge controllers
  sb_edac: update Kconfig description
  sb_edac: search devices using product id
  sb_edac: make RIR limit retrieval per model
  sb_edac: make node id retrieval per model
  sb_edac: make memory type detection per memory controller
 2014-08-15 17:56:45 -06:00
Linus Torvalds
c9d26423e5 More ACPI and power management updates for 3.17-rc1 
- Fix for an ACPI-based device hotplug regression introduced in 3.14
    that causes a kernel panic to trigger when memory hot-remove is
    attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen.
 
  - Fix for a cpufreq regression introduced in 3.16 that triggers a
    "sleeping function called from invalid context" bug in
    dev_pm_opp_init_cpufreq_table() from Stephen Boyd.
 
  - ACPI battery driver fix for a warning message added in 3.16 that
    prints silly stuff sometimes from Mariusz Ceier.
 
  - Hibernation fix for safer handling of mismatches in the 820 memory
    map between the configurations during image creation and during
    the subsequent restore from Chun-Yi Lee.
 
  - ACPI processor driver fix to handle CPU hotplug notifications
    correctly during system suspend/resume from Lan Tianyu.
 
  - Series of four cpuidle menu governor cleanups that also should
    speed it up a bit from Mel Gorman.
 
  - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
    cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann
    and Uwe Kleine-König.
 
  - Version 3.0 of the analyze_suspend.py suspend profiling tool
    from Todd E Brandt.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJT7UnNAAoJEILEb/54YlRxcxIP/ROFeak3+5tt3hkvZCevxpUh
 AMPccgUoqsF2dognO3pcR4AgGP+meM6Qw0zBjPDNx6oo87hw7P1HlngfaRPHnWPh
 iAkY2p1QhGAZW29vqxqBIdLVP9M+Nje0tvOX8/6QEsQgo2y6YCbJU0zITmvb8Tsk
 183cXiz6xXDezt4sPeIVg2QVfngVFtOeNVgHDIhldQSF6zUQJP/3+BVutvaj3olt
 2O3qpNfwJjFh9p6LWQ+CAalq3hJyNZ6ettLNCvudeq4kqRo49WAdjHaRW+qju/NR
 dWybO29MfviczABVQ1ReqSnz0MJOqhZNxkEi5KqnYBb3fx8e2XffsBFzFzTp6BJi
 bp4ALcFIu9r5ctWVxQhmgEC6uhYMIXZ681sH99HyIdzk2cNRgMxRj6u2aVe/Cczu
 Bb489CRHmOrZyXrkmENg+LkOYBNoXcT+RepH9Ex8R+TNBlKLEBKMMgPrfbFeVKWB
 Vm621tHNATJG8nJcs3zJulM2FQ0q8c2irw6WwhUxzbSOxmqSvO5zN3OgYt+c+gWk
 MmA8IhUpQBLkqBx1FMi0lOOdIW3qKZJFrU39VQEjoP4P1nXgf373NPlfgzMvEvqM
 qQ8srMKFUjYxH3g0ftWk5a2MwEjyHQpvZe0djsMCN7ZkFLwUe1ri/R9Ja2LLQcIZ
 SyVkFbbO+moXTRMA1yA9
 =kpiw
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are a couple of regression fixes, cpuidle menu governor
  optimizations, fixes for ACPI proccessor and battery drivers,
  hibernation fix to avoid problems related to the e820 memory map,
  fixes for a few cpufreq drivers and a new version of the suspend
  profiling tool analyze_suspend.py.

  Specifics:

   - Fix for an ACPI-based device hotplug regression introduced in 3.14
     that causes a kernel panic to trigger when memory hot-remove is
     attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen

   - Fix for a cpufreq regression introduced in 3.16 that triggers a
     "sleeping function called from invalid context" bug in
     dev_pm_opp_init_cpufreq_table() from Stephen Boyd

   - ACPI battery driver fix for a warning message added in 3.16 that
     prints silly stuff sometimes from Mariusz Ceier

   - Hibernation fix for safer handling of mismatches in the 820 memory
     map between the configurations during image creation and during the
     subsequent restore from Chun-Yi Lee

   - ACPI processor driver fix to handle CPU hotplug notifications
     correctly during system suspend/resume from Lan Tianyu

   - Series of four cpuidle menu governor cleanups that also should
     speed it up a bit from Mel Gorman

   - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
     cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
     Pargmann and Uwe Kleine-König

   - Version 3.0 of the analyze_suspend.py suspend profiling tool from
     Todd E Brandt"

* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Fix warning message in acpi_battery_get_state()
  PM / tools: analyze_suspend.py: update to v3.0
  cpufreq: arm_big_little: fix module license spec
  cpufreq: speedstep-smi: fix decimal printf specifiers
  ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
  cpufreq: OPP: Avoid sleeping while atomic
  cpufreq: cpu0: Do not print error message when deferring
  cpufreq: integrator: Use set_cpus_allowed_ptr
  PM / hibernate: avoid unsafe pages in e820 reserved regions
  ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
  cpuidle: menu: Lookup CPU runqueues less
  cpuidle: menu: Call nr_iowait_cpu less times
  cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
  cpuidle: menu: Use shifts when calculating averages where possible
 2014-08-14 18:13:46 -06:00
Linus Torvalds
ad15afb8b9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Pull networking fixes from David Miller:
 "I'm sending this out, in particular, to get the iwlwifi fix
  propagated:

   1) Fix build due to missing include in i40e driver, from Lucas
      Tanure.

   2) Memory leak in openvswitch port allocation, from Chirstoph Jaeger.

   3) Check DMA mapping errors in myri10ge, from Stanislaw Gruszka.

   4) Fix various deadlock scenerios in sunvnet driver, from Sowmini
      Varadhan.

   5) Fix cxgb4i build failures with incompatible Kconfig settings of
      the driver vs ipv6, from Anish Bhatt.

   6) Fix generation of ACK packet timestamps in the presence of TSO
      which will be split up, from Willem de Bruijn.

   7) Don't enable sched scan in iwlwifi driver, it causes firmware
      crashes in some revisions.  From Emmanuel Grumbach.

   8) Revert a macvlan simplification that causes crashes.

   9) Handle RTT calculations properly in the presence of repair'd SKBs,
      from Andrey Vagin.

  10) SIT tunnel lookup uses wrong device index in compares, from
      Shmulik Ladkani.

  11) Handle MTU reductions in TCP properly for ipv4 mapped ipv6
      sockets, from Neal Cardwell.

  12) Add missing annotations in rhashtable code, from Thomas Graf.

  13) Fix false interpretation of two RTOs as being from the same TCP
      loss event in the FRTO code, from Neal Cardwell"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  netlink: Annotate RCU locking for seq_file walker
  rhashtable: fix annotations for rht_for_each_entry_rcu()
  rhashtable: unexport and make rht_obj() static
  rhashtable: RCU annotations for next pointers
  tcp: fix ssthresh and undo for consecutive short FRTO episodes
  tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic
  tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()
  sit: Fix ipip6_tunnel_lookup device matching criteria
  net: ethernet: ibm: ehea: Remove duplicate object from Makefile
  net: xgene: Check negative return value of xgene_enet_get_ring_size()
  tcp: don't use timestamp from repaired skb-s to calculate RTT (v2)
  net: xilinx: Remove .owner field for driver
  Revert "macvlan: simplify the structure port"
  iwlwifi: mvm: disable scheduled scan to prevent firmware crash
  xen-netback: remove loop waiting function
  xen-netback: don't stop dealloc kthread too early
  xen-netback: move NAPI add/remove calls
  xen-netback: fix debugfs entry creation
  xen-netback: fix debugfs write length check
  net-timestamp: fix missing tcp fragmentation cases
  ...
 2014-08-14 17:25:21 -06:00
Thomas Graf
93f560811e rhashtable: fix annotations for rht_for_each_entry_rcu() 
Call rcu_deference_raw() directly from within rht_for_each_entry_rcu()
as list_for_each_entry_rcu() does.

Fixes the following sparse warnings:
net/netlink/af_netlink.c:2906:25:    expected struct rhash_head const *__mptr
net/netlink/af_netlink.c:2906:25:    got struct rhash_head [noderef] <asn:4>*<noident>

Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-08-14 15:13:39 -07:00
Thomas Graf
c91eee56dc rhashtable: unexport and make rht_obj() static 
No need to export rht_obj(), all inner to outer object translations
occur internally. It was intended to be used with rht_for_each() which
now primarily serves as the iterator for rhashtable_remove_pprev() to
effectively flush and free the full table.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-08-14 15:13:39 -07:00
Thomas Graf
5300fdcb7b rhashtable: RCU annotations for next pointers 
Properly annotate next pointers as access is RCU protected in
the lookup path.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-08-14 15:13:39 -07:00
Linus Torvalds
e3b1fd56f1 Main set of InfiniBand/RDMA updates for 3.17 merge window: 
- MR reregistration support
  - MAD support for RMPP in userspace
  - iSER and SRP initiator updates
  - ocrdma hardware driver updates
  - other fixes...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJT7N2GAAoJEENa44ZhAt0hUiIQAKBqYIjpB3QY6Z/B19mxDxku
 I81B3OkirumbAaCLoLckvq4gnwQ+BAD+YUmXgP08TCIgrABZAYYw+WvMEY9WNyQB
 x3Pv+BzX+wKKNaQkSnB9JVdku+BSI76eW0YYrIX0F0x1o0Jq9JpSkia91KmRvqmX
 YSFy2R7BjEZ4lfo/uscydHT26Q6EdT3od4iv48K8qq5rKdjtyYNgD/75DLCN599Z
 uI1f98e6Tl+7nHWaioQB61zlYPkNPLAnZtMrY2j4tarTwYwX1KhF3eV7z39L1l81
 nhMIXr+qBXtYuZw3I9rKqw3VVCCqB9e6E8FIA5K/d2jWqO+0TqIMUYOuZXuCezWg
 o+uGgwbDOweBqwrKRmiR2M0lk2I1Z16jBxYuaUBbLImG0/NPtuUB22t6RbPAojTa
 EjDkb9XBA7uFUMrYYnou+HxEzmJUYkin6wgGxtklYEKUqvh8G9ccGt6httWrCSrV
 mpjwJv+S4LdFM49wdP993lYthpCoZ42yxEzZ7zJ/KTt17/Wb5F4RtHIROGVFkHdT
 mo8RUz5DGDznfNQgn0m/jC3woFnMNpLOduI+CivhrwrWCwMpSUxIjqWu3263pIJ7
 +H0kNOKDAbp6+F27j+AVznlyXnaEtYyM8EZnysG1Hkz24gCSWBYo5Ep8eSH8LgY4
 9VPc75KVG6uddx5mhg5h
 =wOm0
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull infiniband/rdma updates from Roland Dreier:
 "Main set of InfiniBand/RDMA updates for 3.17 merge window:

   - MR reregistration support
   - MAD support for RMPP in userspace
   - iSER and SRP initiator updates
   - ocrdma hardware driver updates
   - other fixes..."

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits)
  IB/srp: Fix return value check in srp_init_module()
  RDMA/ocrdma: report asic-id in query device
  RDMA/ocrdma: Update sli data structure for endianness
  RDMA/ocrdma: Obtain SL from device structure
  RDMA/uapi: Include socket.h in rdma_user_cm.h
  IB/srpt: Handle GID change events
  IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0]
  IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0]
  RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf()
  IPoIB: Remove unnecessary test for NULL before debugfs_remove()
  IB/mad: Add user space RMPP support
  IB/mad: add new ioctl to ABI to support new registration options
  IB/mad: Add dev_notice messages for various umad/mad registration failures
  IB/mad: Update module to [pr|dev]_* style print messages
  IB/ipoib: Avoid multicast join attempts with invalid P_key
  IB/umad: Update module to [pr|dev]_* style print messages
  IB/ipoib: Avoid flushing the workqueue from worker context
  IB/ipoib: Use P_Key change event instead of P_Key polling mechanism
  IB/ipath: Add P_Key change event support
  mlx4_core: Add support for secure-host and SMP firewall
  ...
 2014-08-14 11:09:05 -06:00
Linus Torvalds
1d508f8ace Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 
Pull more powerpc updates from Ben Herrenschmidt:
 "Here are some more powerpc bits for 3.17, essentially fixes.

  The biggest series, also aimed at -stable, is from Aneesh and is the
  result of weeks and weeks of debugging to find out why the heck or THP
  implementation was occasionally triggering multi-hit errors in our
  level 1 TLB.  It ended up being a combination of issues including
  subtleties as to how we should invalidate those special 'MPSS' pages
  we use to allow the use of 16M pages inside 4K/64K "base page size"
  segments (you really have to love our MMU !)

  Another interesting one in the "OMG" category is the series from
  Michael adding memory barriers to spin_is_locked().  That's also the
  result of many days of debugging to figure out why the semaphore code
  would occasionally crash in ways that made no sense.  It ended up
  being some creative lock stacking that was defeated by the fact that
  our locks allow a load inside the locked section to be re-ordered with
  the load of the lock value itself (I'm still of two mind about whether
  to kill that once and for all by putting a heavier barrier back into
  our lock implementation...).  The fixes come with a long explanation
  in the cset comments, feel free to read it if you feel like having a
  headache today"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc/thp: Add tracepoints to track hugepage invalidate
  powerpc/mm: Use read barrier when creating real_pte
  powerpc/thp: Use ACCESS_ONCE when loading pmdp
  powerpc/thp: Invalidate with vpn in loop
  powerpc/thp: Handle combo pages in invalidate
  powerpc/thp: Invalidate old 64K based hash page mapping before insert of 4k pte
  powerpc/thp: Don't recompute vsid and ssize in loop on invalidate
  powerpc/thp: Add write barrier after updating the valid bit
  powerpc: reorder per-cpu NUMA information's initialization
  powerpc/perf/hv-24x7: Use kmem_cache_free
  powerpc/pseries/hvcserver: Fix endian issue in hvcs_get_partner_info
  powerpc: Hard disable interrupts in xmon
  powerpc: remove duplicate definition of TEXASR_FS
  powerpc/pseries: Avoid deadlock on removing ddw
  powerpc/pseries: Failure on removing device node
  powerpc/boot: Use correct zlib types for comparison
  powerpc/powernv: Interface to register/unregister opal dump region
  printk: Add function to return log buffer address and size
  powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYS
  powerpc/ppc476: Disable BTAC
  ...
 2014-08-14 10:14:07 -06:00
Roland Dreier
d087f6ad72 Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'iwcm', 'mad', 'misc', 'mlx4', 'mlx5', 'ocrdma' and 'srp' into for-next 2014-08-14 08:58:04 -07:00
Linus Torvalds
ae36e95cf8 The branch contains the following device tree changes the v3.17 merge 
window:
 
 Group changes to the device tree. In preparation for adding device tree
 overlay support, OF_DYNAMIC is reworked so that a set of device tree
 changes can be prepared and applied to the tree all at once. OF_RECONFIG
 notifiers see the most significant change here so that users always get
 a consistent view of the tree. Notifiers generation is moved from before
 a change to after it, and notifiers for a group of changes are emitted
 after the entire block of changes have been applied
 
 Automatic console selection from DT. Console drivers can now use
 of_console_check() to see if the device node is specified as a console
 device. If so then it gets added as a preferred console. UART devices
 get this support automatically when uart_add_one_port() is called.
 
 DT unit tests no longer depend on pre-loaded data in the device tree.
 Data is loaded dynamically at the start of unit tests, and then unloaded
 again when the tests have completed.
 
 Also contains a few bugfixes for reserved regions and early memory setup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT6M7XAAoJEMWQL496c2LNTTgP/2rXyrTTGZpK/qrLKHWKYHvr
 XL7tcTkhA0OLU64E37fB+xtDXyBYnLsharuwUFSd1LlL1Wnc1cZN5ORRlMJbmjUR
 Wvwl0A8/mkhGl4tzzKgJ4z4rMJXvlZfJRpnVoRB5FOn90LI7k/jsf5rIwF/6S90B
 6D6II0r4RG9ku1m7g70cToxcIFCzp0V+eu2tym9GnhsyGKlunPT9iNiTpwfVhPAj
 QUvMPKIQXReOv6xDU5q6E07839IMf7SdAvciBTHGnCDD7sGziHvnBIShj/2vTDAF
 27sGRKrWUnnuxRUMOoIudiYyeHXIdt1WXp6FsS/ztVI37Ijh9YPShJwWGhQDppnp
 4tcoSdefqw9IRUajAVWsB0RUW/tCL4a7tggWofylOA6itDi+HZnw6YafE1G1YzxF
 q8OFo9uqLcmFQfHDJpk+sdtXoMZzOgrxlEscsGsQ8kd2Uoe8+chgR9EY1sqPkWVF
 Zw0FJCTB6spBlsnXeboBGrnvpbPkacwhvesIFO0IANy4j4R55xlEeTcs1fe3ubUf
 UhNyyFdnCAUA7e5CAabcAQYsdbEKG6v0Il3H6xts36c8lXCSFXVgNcw5mdCpFCcQ
 DZ3/1FGSVzkYNXX8hlzIn1W0dqvwn4x0ZbnpXUJrGUBpSmjt9qkXx0XbdeFwartU
 7X4tNGS1jfNYhOdP87jF
 =8IFz
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...
 2014-08-14 09:53:39 -06:00
Linus Torvalds
cc8a44c671 VFIO updates for v3.17-rc1 
- Enable support for bus reset on device release
  - Fixes for EEH support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT64V6AAoJECObm247sIsimLkQAKL8sdGu2xwjujB/JFQrTXq0
 9jN42aNhv50fVE9p2FKoqet/6VlQmRxLUvA9By94iMIKsUb3w0Rziti1FI3iyKtb
 7lPzhCY9GWFnMD7Ero0nx+ljYrDiMlDdjeJ1ke25f1WZKMv524FJvA3cbiCvnAm0
 3CRV0buq69deiiy5j1dbJdwYfPTJU7Jepqg8/OkjgJYokKRwqng9QfUgRbNwfL5d
 FuVWaiGKvkxj4Sil0M3m4Ogf2yqqweX0am/rC3pGoO9woc9XFV560ABoEvXe3PI/
 TPq3X63eqiBtu+t0qnYdi9jAfV62NMQEOwgb1z3IrIRoR9pwCOR2UFVQSr9X+rMp
 EGrGUNkgU9cTzGeiSPmTII/ccYgsFpivy2UV+lNeDs4kraU++Q3QoJ2jwbzx8unF
 nzyEfW8BizUenBZHsLvBDrlDddn5uEgao9ivdc9yBhjtOQshA8xMUKFG1PHzqtYg
 Vis9/K2TKrZBcQTBD7nwCWWPLUg11N7stD6Ui0DEAEqJtGWxCNSqcKGTen1NvsOp
 hpFdlySYORNvPQDMMBmjMc+YkngBwcwDaITE5FFMbyDJYymKA28MtkYaDVLZp5kZ
 yYua3afxxDDaAzh7ikzUMpBlsSxbRpanAeTtEMQ0s2+ZfkzdvKztmTe9S26swQXG
 p9hb4pIJNflk014lnNt1
 =ADuE
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.17-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:
 - enable support for bus reset on device release
 - fixes for EEH support

* tag 'vfio-v3.17-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio: Enable VFIO if EEH is not supported
  drivers/vfio: Allow EEH to be built as module
  drivers/vfio: Fix EEH build error
  vfio-pci: Attempt bus/slot reset on release
  vfio-pci: Use mutex around open, release, and remove
  vfio-pci: Release devices with BusMaster disabled
 2014-08-14 09:41:41 -06:00
Linus Torvalds
a8e4def604 MMC core: 
- Forward compatibility for eMMC.
  - Fix some blacklisted cards with broken secure discard.
 
 MMC host:
  - mmci: Add support for Qualcomm variant.
  - mmci: Fix regression for arm_variant.
  - sdhci: Various fixes and cleanups.
  - sdhci: Improve external VDD regulator support.
  - sdhci: Support for DDR50 1.8V mode for BayTrail.
  - sdhci-st: Add driver for ST SDHCI controller.
  - sh-mmcif: DMA fixes.
  - omap_hsmmc: Add support for SDIO interrupts.
  - sdhci-pci: Add support for Intel Quark X1000.
  - dw_mmc: Update the reset sequence.
  - s3cmci: port DMA code to dmaengine API.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT6K/QAAoJEP4mhCVzWIwpj5UP/3KWAsUCz5PlPaTxWgh/U+aN
 lwO8aryFGjxfengCtJaw4cVksg3Lc5EvaSweg7BUqTucHoq/epdAU+Doqf5OVZ9Y
 kicfx+WOAwIGTTuY9Wu7W884WgF+litZW4O4LtQnr6hHzx+xQhPabTc6zKJVS7WD
 /Fx1Qcc0WFdGA3D0VdpCqGa7Y8IYk8cEP16MOA4s0HxZxONkjFbPdpQRF/zywGOA
 tqJC7kAhlY+Rx5bsrr5Lvbhu2Ut+cfLBPdPYuJz50wnymQ15IrLj5n4rSd5GLY+f
 HjMeCJzDHi1gk26wn3kYyWwz3JkJGWhtf6fC1hDqvkWEmHd872v7EuU9V4D3ehV1
 xPVVVyUYqMgs0Vi+PXAlMhoajrwgnlM1Ox0sheOOefcaRoFVpV6PZOuAsAOfKRfC
 ySOuEhOKn5OOvjH2TB4dNH1a3hegR9B3fJqjFe4UmUQP4FBicOfUKi+n6HwC+Omb
 VDCuVvwmMCVPi/Lop6thpPepJBfR8Ncb3vanLpK64LcIjEfoPTwoAyNI32Qnry52
 XMO4Tppl+bPzglGpV427KXlFbBwccp+8sCMRc/4lRiIMH9QhbZfVA1FcxwpvZ419
 6SKXmqhA62nHLcWlQrRlvdnNyr+Ow2o5gJ0iVffByfmzcgPmja9YZYyDfx+DxWOo
 W1oItq+qMd25rnnOPTLB
 =kGSY
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "Me and Chris Ball decided to try out using my MMC tree as the primary
  one, to simplify handling of patches.

  This pull does thus contains all the MMC patches for 3.17 rc1, no pull
  from Chris this time.

  Details:

  MMC core:
   - forward compatibility for eMMC
   - fix some blacklisted cards with broken secure discard

  MMC host:
   - mmci: Add support for Qualcomm variant
   - mmci: Fix regression for arm_variant
   - sdhci: Various fixes and cleanups
   - sdhci: Improve external VDD regulator support
   - sdhci: Support for DDR50 1.8V mode for BayTrail
   - sdhci-st: Add driver for ST SDHCI controller
   - sh-mmcif: DMA fixes
   - omap_hsmmc: Add support for SDIO interrupts
   - sdhci-pci: Add support for Intel Quark X1000
   - dw_mmc: Update the reset sequence
   - s3cmci: port DMA code to dmaengine API"

* tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
  mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.
  mmc: mmci: Reverse IRQ handling for the arm_variant
  mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()
  mmc: mmci: Remove redundant check of status for DATA irq
  mmc: dw_mmc: change to use recommended reset procedure
  mmc: sdhci-pxav3: Use devm_* managed helpers
  mmc: tmio: Configure DMA slave bus width
  mmc: sh_mmcif: Configure DMA slave bus width
  mmc: sh_mmcif: Fix DMA slave address configuration
  mmc: sh_mmcif: Document DT bindings
  mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback
  mmc: Do not advertise secure discard if it is blacklisted
  mmc: sdhci-msm: Get COMPILE_TEST support
  mmc: sdhci-msm: Remove unnecessary header file inclusion
  mmc: sdhci-msm: Fix the binding example
  mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller
  mmc: sdhci: Preset value not supported in Baytrail eMMC
  mmc: MMC_USDHI6ROL0 should depend on HAS_DMA
  mmc: MMC_SH_MMCIF should depend on HAS_DMA
  ...
 2014-08-14 09:15:53 -06:00
Linus Torvalds
d429a3639c Merge branch 'for-3.17/drivers' of git://git.kernel.dk/linux-block 
Pull block driver changes from Jens Axboe:
 "Nothing out of the ordinary here, this pull request contains:

   - A big round of fixes for bcache from Kent Overstreet, Slava Pestov,
     and Surbhi Palande.  No new features, just a lot of fixes.

   - The usual round of drbd updates from Andreas Gruenbacher, Lars
     Ellenberg, and Philipp Reisner.

   - virtio_blk was converted to blk-mq back in 3.13, but now Ming Lei
     has taken it one step further and added support for actually using
     more than one queue.

   - Addition of an explicit SG_FLAG_Q_AT_HEAD for block/bsg, to
     compliment the the default behavior of adding to the tail of the
     queue.  From Douglas Gilbert"

* 'for-3.17/drivers' of git://git.kernel.dk/linux-block: (86 commits)
  bcache: Drop unneeded blk_sync_queue() calls
  bcache: add mutex lock for bch_is_open
  bcache: Correct printing of btree_gc_max_duration_ms
  bcache: try to set b->parent properly
  bcache: fix memory corruption in init error path
  bcache: fix crash with incomplete cache set
  bcache: Fix more early shutdown bugs
  bcache: fix use-after-free in btree_gc_coalesce()
  bcache: Fix an infinite loop in journal replay
  bcache: fix crash in bcache_btree_node_alloc_fail tracepoint
  bcache: bcache_write tracepoint was crashing
  bcache: fix typo in bch_bkey_equal_header
  bcache: Allocate bounce buffers with GFP_NOWAIT
  bcache: Make sure to pass GFP_WAIT to mempool_alloc()
  bcache: fix uninterruptible sleep in writeback thread
  bcache: wait for buckets when allocating new btree root
  bcache: fix crash on shutdown in passthrough mode
  bcache: fix lockdep warnings on shutdown
  bcache allocator: send discards with correct size
  bcache: Fix to remove the rcu_sched stalls.
  ...
 2014-08-14 09:10:21 -06:00
Linus Torvalds
4a319a490c Merge branch 'for-3.17/core' of git://git.kernel.dk/linux-block 
Pull block core bits from Jens Axboe:
 "Small round this time, after the massive blk-mq dump for 3.16.  This
  pull request contains:

   - Fixes for max_sectors overflow in ioctls from Akinoby Mita.

   - Partition off-by-one bug fix in aix partitions from Dan Carpenter.

   - Various small partition cleanups from Fabian Frederick.

   - Fix for the block integrity code sometimes returning the wrong
     vector count from Gu Zheng.

   - Cleanup an re-org of the blk-mq queue enter/exit percpu counters
     from Tejun.  Dependent on the percpu pull for 3.17 (which was in
     the block tree too), that you have already pulled in.

   - A blkcg oops fix, also from Tejun"

* 'for-3.17/core' of git://git.kernel.dk/linux-block:
  partitions: aix.c: off by one bug
  blkcg: don't call into policy draining if root_blkg is already gone
  Revert "bio: modify __bio_add_page() to accept pages that don't start a new segment"
  bio: modify __bio_add_page() to accept pages that don't start a new segment
  block: fix SG_[GS]ET_RESERVED_SIZE ioctl when max_sectors is huge
  block: fix BLKSECTGET ioctl when max_sectors is greater than USHRT_MAX
  block/partitions/efi.c: kerneldoc fixing
  block/partitions/msdos.c: code clean-up
  block/partitions/amiga.c: replace nolevel printk by pr_err
  block/partitions/aix.c: replace count*size kzalloc by kcalloc
  bio-integrity: add "bip_max_vcnt" into struct bio_integrity_payload
  blk-mq: use percpu_ref for mq usage count
  blk-mq: collapse __blk_mq_drain_queue() into blk_mq_freeze_queue()
  blk-mq: decouble blk-mq freezing from generic bypassing
  block, blk-mq: draining can't be skipped even if bypass_depth was non-zero
  blk-mq: fix a memory ordering bug in blk_mq_queue_enter()
 2014-08-14 09:07:02 -06:00
Linus Torvalds
f0094b28f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Pull networking fixes from David Miller:
 "Several networking final fixes and tidies for the merge window:

   1) Changes during the merge window unintentionally took away the
      ability to build bluetooth modular, fix from Geert Uytterhoeven.

   2) Several phy_node reference count bug fixes from Uwe Kleine-König.

   3) Fix ucc_geth build failures, also from Uwe Kleine-König.

   4) Fix klog false positivies when netlink messages go to network
      taps, by properly resetting the network header.  Fix from Daniel
      Borkmann.

   5) Sizing estimate of VF netlink messages is too small, from Jiri
      Benc.

   6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian.

   7) VLAN untagging is erroneously dependent upon whether the VLAN
      module is loaded or not, but there are generic dependencies that
      matter wrt what can be expected as the SKB enters the stack.
      Make the basic untagging generic code, and do it unconditionally.
      From Vlad Yasevich.

   8) xen-netfront only has so many slots in it's transmit queue so
      linearize packets that have too many frags.  From Zoltan Kiss.

   9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian
      Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits)
  net: bcmgenet: correctly resume adapter from Wake-on-LAN
  net: bcmgenet: update UMAC_CMD only when link is detected
  net: bcmgenet: correctly suspend and resume PHY device
  net: bcmgenet: request and enable main clock earlier
  net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call
  xen-netfront: Fix handling packets on compound pages with skb_linearize
  net: fec: Support phys probed from devicetree and fixed-link
  smsc: replace WARN_ON() with WARN_ON_SMP()
  xen-netback: Don't deschedule NAPI when carrier off
  net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile
  wan: wanxl: Remove typedefs from struct names
  m68k/atari: EtherNEC - ethernet support (ne)
  net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call
  hdlc: Remove typedefs from struct names
  airo_cs: Remove typedef local_info_t
  atmel: Remove typedef atmel_priv_ioctl
  com20020_cs: Remove typedef com20020_dev_t
  ethernet: amd: Remove typedef local_info_t
  net: Always untag vlan-tagged traffic on input.
  drivers: net: Add APM X-Gene SoC ethernet driver support.
  ...
 2014-08-13 18:27:40 -06:00
Linus Torvalds
06b8ab5528 NFS client updates for Linux 3.17 
Highlights include:
 
 - Stable fix for a bug in nfs3_list_one_acl()
 - Speed up NFS path walks by supporting LOOKUP_RCU
 - More read/write code cleanups
 - pNFS fixes for layout return on close
 - Fixes for the RCU handling in the rpcsec_gss code
 - More NFS/RDMA fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT65zoAAoJEGcL54qWCgDyvq8QAJ+OKuC5dpngrZ13i4ZJIcK1
 TJSkWCr44FhYPlrmkLCntsGX6C0376oFEtJ5uqloqK0+/QtvwRNVSQMKaJopKIVY
 mR4En0WwpigxVQdW2lgto6bfOhzMVO+llVdmicEVrU8eeSThATxGNv7rxRzWorvL
 RX3TwBkWSc0kLtPi66VRFQ1z+gg5I0kngyyhsKnLOaHHtpTYP2JDZlRPRkokXPUg
 nmNedmC3JrFFkarroFIfYr54Qit2GW/eI2zVhOwHGCb45j4b2wntZ6wr7LpUdv3A
 OGDBzw59cTpcx3Hij9CFvLYVV9IJJHBNd2MJqdQRtgWFfs+aTkZdk4uilUJCIzZh
 f4BujQAlm/4X1HbPxsSvkCRKga7mesGM7e0sBDPHC1vu0mSaY1cakcj2kQLTpbQ7
 gqa1cR3pZ+4shCq37cLwWU0w1yElYe1c4otjSCttPCrAjXbXJZSFzYnHm8DwKROR
 t+yEDRL5BIXPu1nEtSnD2+xTQ3vUIYXooZWEmqLKgRtBTtPmgSn9Vd8P1OQXmMNo
 VJyFXyjNx5WH06Wbc/jLzQ1/cyhuPmJWWyWMJlVROyv+FXk9DJUFBZuTkpMrIPcF
 NlBXLV1GnA7PzMD9Xt9bwqteERZl6fOUDJLWS9P74kTk5c2kD+m+GaqC/rBTKKXc
 ivr2s7aIDV48jhnwBSVL
 =KE07
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - stable fix for a bug in nfs3_list_one_acl()
   - speed up NFS path walks by supporting LOOKUP_RCU
   - more read/write code cleanups
   - pNFS fixes for layout return on close
   - fixes for the RCU handling in the rpcsec_gss code
   - more NFS/RDMA fixes"

* tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  nfs: reject changes to resvport and sharecache during remount
  NFS: Avoid infinite loop when RELEASE_LOCKOWNER getting expired error
  SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
  NFS: fix two problems in lookup_revalidate in RCU-walk
  NFS: allow lockless access to access_cache
  NFS: teach nfs_lookup_verify_inode to handle LOOKUP_RCU
  NFS: teach nfs_neg_need_reval to understand LOOKUP_RCU
  NFS: support RCU_WALK in nfs_permission()
  sunrpc/auth: allow lockless (rcu) lookup of credential cache.
  NFS: prepare for RCU-walk support but pushing tests later in code.
  NFS: nfs4_lookup_revalidate: only evaluate parent if it will be used.
  NFS: add checks for returned value of try_module_get()
  nfs: clear_request_commit while holding i_lock
  pnfs: add pnfs_put_lseg_async
  pnfs: find swapped pages on pnfs commit lists too
  nfs: fix comment and add warn_on for PG_INODE_REF
  nfs: check wait_on_bit_lock err in page_group_lock
  sunrpc: remove "ec" argument from encrypt_v2 operation
  sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
  sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
  ...
 2014-08-13 18:13:19 -06:00
Linus Torvalds
cec997093b Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs 
Pull quota, reiserfs, UDF updates from Jan Kara:
 "Scalability improvements for quota, a few reiserfs fixes, and couple
  of misc cleanups (udf, ext2)"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: Fix use after free in journal teardown
  reiserfs: fix corruption introduced by balance_leaf refactor
  udf: avoid redundant memcpy when writing data in ICB
  fs/udf: re-use hex_asc_upper_{hi,lo} macros
  fs/quota: kernel-doc warning fixes
  udf: use linux/uaccess.h
  fs/ext2/super.c: Drop memory allocation cast
  quota: remove dqptr_sem
  quota: simplify remove_inode_dquot_ref()
  quota: avoid unnecessary dqget()/dqput() calls
  quota: protect Q_GETFMT by dqonoff_mutex
 2014-08-13 17:45:40 -06:00
Linus Torvalds
8d2d441ac4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client 
Pull Ceph updates from Sage Weil:
 "There is a lot of refactoring and hardening of the libceph and rbd
  code here from Ilya that fix various smaller bugs, and a few more
  important fixes with clone overlap.  The main fix is a critical change
  to the request_fn handling to not sleep that was exposed by the recent
  mutex changes (which will also go to the 3.16 stable series).

  Yan Zheng has several fixes in here for CephFS fixing ACL handling,
  time stamps, and request resends when the MDS restarts.

  Finally, there are a few cleanups from Himangi Saraogi based on
  Coccinelle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
  libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
  rbd: remove extra newlines from rbd_warn() messages
  rbd: allocate img_request with GFP_NOIO instead GFP_ATOMIC
  rbd: rework rbd_request_fn()
  ceph: fix kick_requests()
  ceph: fix append mode write
  ceph: fix sizeof(struct tYpO *) typo
  ceph: remove redundant memset(0)
  rbd: take snap_id into account when reading in parent info
  rbd: do not read in parent info before snap context
  rbd: update mapping size only on refresh
  rbd: harden rbd_dev_refresh() and callers a bit
  rbd: split rbd_dev_spec_update() into two functions
  rbd: remove unnecessary asserts in rbd_dev_image_probe()
  rbd: introduce rbd_dev_header_info()
  rbd: show the entire chain of parent images
  ceph: replace comma with a semicolon
  rbd: use rbd_segment_name_free() instead of kfree()
  ceph: check zero length in ceph_sync_read()
  ceph: reset r_resend_mds after receiving -ESTALE
  ...
 2014-08-13 17:43:29 -06:00
Vasant Hegde
14c4000a88 printk: Add function to return log buffer address and size 
Platforms like IBM Power Systems supports service processor
assisted dump. It provides interface to add memory region to
be captured when system is crashed.

During initialization/running we can add kernel memory region
to be collected.

Presently we don't have a way to get the log buffer base address
and size. This patch adds support to return log buffer address
and size.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
 2014-08-13 15:13:44 +10:00
Rafael J. Wysocki
e67ee10190 Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle' 
* pm-sleep:
  PM / hibernate: avoid unsafe pages in e820 reserved regions

* pm-cpufreq:
  cpufreq: arm_big_little: fix module license spec
  cpufreq: speedstep-smi: fix decimal printf specifiers
  cpufreq: OPP: Avoid sleeping while atomic
  cpufreq: cpu0: Do not print error message when deferring
  cpufreq: integrator: Use set_cpus_allowed_ptr

* pm-cpuidle:
  cpuidle: menu: Lookup CPU runqueues less
  cpuidle: menu: Call nr_iowait_cpu less times
  cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
  cpuidle: menu: Use shifts when calculating averages where possible
 2014-08-11 23:19:48 +02:00
Vlad Yasevich
0d5501c1c8 net: Always untag vlan-tagged traffic on input. 
Currently the functionality to untag traffic on input resides
as part of the vlan module and is build only when VLAN support
is enabled in the kernel.  When VLAN is disabled, the function
vlan_untag() turns into a stub and doesn't really untag the
packets.  This seems to create an interesting interaction
between VMs supporting checksum offloading and some network drivers.

There are some drivers that do not allow the user to change
tx-vlan-offload feature of the driver.  These drivers also seem
to assume that any VLAN-tagged traffic they transmit will
have the vlan information in the vlan_tci and not in the vlan
header already in the skb.  When transmitting skbs that already
have tagged data with partial checksum set, the checksum doesn't
appear to be updated correctly by the card thus resulting in a
failure to establish TCP connections.

The following is a packet trace taken on the receiver where a
sender is a VM with a VLAN configued.  The host VM is running on
doest not have VLAN support and the outging interface on the
host is tg3:
10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294837885 ecr 0,nop,wscale 7], length 0
10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294838888 ecr 0,nop,wscale 7], length 0

This connection finally times out.

I've only access to the TG3 hardware in this configuration thus have
only tested this with TG3 driver.  There are a lot of other drivers
that do not permit user changes to vlan acceleration features, and
I don't know if they all suffere from a similar issue.

The patch attempt to fix this another way.  It moves the vlan header
stipping code out of the vlan module and always builds it into the
kernel network core.  This way, even if vlan is not supported on
a virtualizatoin host, the virtual machines running on top of such
host will still work with VLANs enabled.

CC: Patrick McHardy <kaber@trash.net>
CC: Nithin Nayak Sujir <nsujir@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-08-11 12:16:51 -07:00
Linus Torvalds
f6f993328b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 
Pull vfs updates from Al Viro:
 "Stuff in here:

   - acct.c fixes and general rework of mnt_pin mechanism.  That allows
     to go for delayed-mntput stuff, which will permit mntput() on deep
     stack without worrying about stack overflows - fs shutdown will
     happen on shallow stack.  IOW, we can do Eric's umount-on-rmdir
     series without introducing tons of stack overflows on new mntput()
     call chains it introduces.
   - Bruce's d_splice_alias() patches
   - more Miklos' rename() stuff.
   - a couple of regression fixes (stable fodder, in the end of branch)
     and a fix for API idiocy in iov_iter.c.

  There definitely will be another pile, maybe even two.  I'd like to
  get Eric's series in this time, but even if we miss it, it'll go right
  in the beginning of for-next in the next cycle - the tricky part of
  prereqs is in this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  fix copy_tree() regression
  __generic_file_write_iter(): fix handling of sync error after DIO
  switch iov_iter_get_pages() to passing maximal number of pages
  fs: mark __d_obtain_alias static
  dcache: d_splice_alias should detect loops
  exportfs: update Exporting documentation
  dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
  dcache: remove unused d_find_alias parameter
  dcache: d_obtain_alias callers don't all want DISCONNECTED
  dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
  dcache: d_splice_alias mustn't create directory aliases
  dcache: close d_move race in d_splice_alias
  dcache: move d_splice_alias
  namei: trivial fix to vfs_rename_dir comment
  VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
  cifs: support RENAME_NOREPLACE
  hostfs: support rename flags
  shmem: support RENAME_EXCHANGE
  shmem: support RENAME_NOREPLACE
  btrfs: add RENAME_NOREPLACE
  ...
 2014-08-11 11:44:11 -07:00
Linus Torvalds
c7a19c795b Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma 
Pull slave-dma updates from Vinod Koul:
 "Some notable changes are:
   - new driver for AMBA AXI NBPF by Guennadi
   - new driver for sun6i controller by Maxime
   - pl330 drivers fixes from Lar's
   - sh-dma updates and fixes from Laurent, Geert and Kuninori
   - Documentation updates from Geert
   - drivers fixes and updates spread over dw, edma, freescale, mpc512x
     etc.."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
  dmaengine: sun6i: depends on RESET_CONTROLLER
  dma: at_hdmac: fix invalid remaining bytes detection
  dmaengine: nbpfaxi: don't build this driver where it cannot be used
  dmaengine: nbpf_error_get_channel() can be static
  dma: pl08x: Use correct specifier for size_t values
  dmaengine: Remove the context argument to the prep_dma_cyclic operation
  dmaengine: nbpfaxi: convert to tasklet
  dmaengine: nbpfaxi: fix a theoretical race
  dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
  dmaengine: add device tree binding documentation for the nbpfaxi driver
  dmaengine: edma: Do not register second device when booted with DT
  dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  dmaengine: rcar-dmac: Add device tree bindings documentation
  dmaengine: shdma: Allocate cyclic sg list dynamically
  dmaengine: shdma: Make channel filter ignore unrelated devices
  dmaengine: sh: Rework Kconfig and Makefile
  dmaengine: sun6i: Fix memory leaks
  dmaengine: sun6i: Free the interrupt before killing the tasklet
  dmaengine: sun6i: Remove switch statement from buswidth convertion routine
  dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
  ...
 2014-08-11 07:14:01 -07:00
Linus Torvalds
5fd41f2a10 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux 
Pull thermal updates from Zhang Rui:
 "Specifics:

   - adds full support for 2 types of Thermal Controllers produced by
     STMicroelectronics.  One is a more traditional memory mapped
     variant, the other is controlled solely by system configuration
     registers.  From Lee Jones.

   - add TMU (Thermal Management Unit) support for Exynos3250 Soc.
     From Chanwoo Choi.

   - add critical and passive trip point support for int3403 thermal
     driver.  From Srinivas Pandruvada.

   - a couple of small fixes/cleanups from Javi Merino, and Geert
     Uytterhoeven"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: document struct thermal_zone_device and thermal_governor
  thermal: cpu_cooling: fix typo highjack -> hijack
  thermal: rcar: Document SoC-specific bindings
  thermal: samsung: Add TMU support for Exynos3250 SoC
  thermal: exynos: fix ordering in exynos_tmu_remove()
  thermal: allow building dove_thermal with mvebu
  thermal: sti: Add support for ST's Memory Mapped based Thermal controller
  thermal: sti: Add support for ST's System Config Register based Thermal controller
  thermal: sti: Introduce ST Thermal core code
  thermal: sti: Supply Device Tree documentation
  Thermal: int3403: Add CRT and PSV trip
 2014-08-11 07:04:17 -07:00
Grant Likely
663d3f7c2e Merge branch 'devicetree/next-overlay' into devicetree/next 
Conflicts:
	drivers/of/testcase-data/testcases.dts
 2014-08-11 14:06:23 +01:00
Grant Likely
b775e642bf Merge branch 'devicetree/next-console' into devicetree/next 2014-08-11 14:03:08 +01:00
Jaehoon Chung
26375b5c84 mmc: dw_mmc: Slot quirk "disable-wp" is deprecated. 
Slot quirks "disable-wp" is deprecated.
Instead, use the host quirk "disable-wp".
(Because the slot-node is removed in dt-file.)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
 2014-08-11 11:42:39 +02:00
Linus Torvalds
c8d6637d04 This finally applies the stricter sysfs perms checking we pulled out 
before last merge window.  A few stragglers are fixed (thanks linux-next!)
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT6CrEAAoJENkgDmzRrbjx3GoQAI1rt8XbTE8zVGf1PKp0SL10
 gWWL9BnnHtUFriwgIbT4mBa1p0wnavIzJIeUBH0rJb2BNAbf7mBT7CFPrMuS+iV2
 WlRoy/chIFnX5A7m6ddaHnzL8lPhMFvUi8dpvxO6FwpyhhNcUHqmb+uCZeLjTX/m
 Gj5mlOlilvH2NSugKyiTapCgcQMQqaaxcwKxyg1z3FRo12gwKvTBdjzdA3Fg7k4T
 TAEbTG4Fq6Q7DkQYDpJK2KWDkPmJ7hxExHFW/M0m1r7DpxY1oHI95TsugU3Mr2mM
 90S15vA6Sn0l1+bRiv5qHF26VjOpdhC8uQhydjnX+lqzBGBRNoMUE/ubmxd43G4m
 /VlVJ9ZD40HLEmRFdtJI6UZSHYwDh7eruVH7Sjj8KFiqGps/F6nDOhV7fVLOdI+0
 J9pLBbj1mA38pIK/XC3r2k8Z/u9GB/7tJFirzmk5rIVzNb/4GBrn/Cgf+GDX7djz
 r8c2QnLeUIht5fm34qKNnSQ/o+ZBKmG6f2bLuBesntZMsAD2cC5TUEP15NERuF3a
 Wa7Wn1Y9WuonH7O3j+PoUOys/bGLXZeFXfKYS8A8SGroE99xo/QhkRm/sNU0+wEz
 JTN4Sra03imE/YSniFnRyRiAShR3KAVen/yfOx6XPs/r5XrFG14Q7cqCKjp1EjHj
 TX5scRWFM5qntTSloGJt
 =9mjn
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "This finally applies the stricter sysfs perms checking we pulled out
  before last merge window.  A few stragglers are fixed (thanks
  linux-next!)"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  arch/powerpc/platforms/powernv/opal-dump.c: fix world-writable sysfs files
  arch/powerpc/platforms/powernv/opal-elog.c: fix world-writable sysfs files
  drivers/video/fbdev/s3c2410fb.c: don't make debug world-writable.
  ARM: avoid ARM binutils leaking ELF local symbols
  scripts: modpost: Remove numeric suffix pattern matching
  scripts: modpost: fix compilation warning
  sysfs: disallow world-writable files.
  module: return bool from within_module*()
  module: add within_module() function
  modules: Fix build error in moduleloader.h
 2014-08-10 21:31:58 -07:00
Linus Torvalds
c23190c0bf Nicolas Pitre added generic tracepoints for tracing IPIs and updated the 
arm and arm64 architectures. It required some minor updates to the generic
 tracepoint system, so it had to wait for me to implement them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJT5N6DAAoJEKQekfcNnQGuv60H/2NXDO/kUtvdF0L7ewaGbDaO
 sjGOXMHDDgF4fQixPsIYNHdra0iGSPL59NBjIaLsESFsB8SUOVqXSclV0MSiZJQc
 1PgTduE19p2kEMsqw6F4l8Ir8hPrUT8V8pQScR9lUkww3ANpyTB6Bbg1rZHcmTYA
 yAq20q85rfQrAGwbvvhg40UYF8/su0FMUAbt/a180kVL8yeQI2liAkNOJTMCVq35
 PpL7if4dlqAhKMqne71ae080PIPOH34q2lmZX3/SbpRvT2tSkS4dkoSFtCAD4pvx
 c2TKNOxEDDWlinN/305PXH2yQ87MTIm44SBaTu/WPllUSQoO//EKI7+13tNS8Qc=
 =/VeP
 -----END PGP SIGNATURE-----

Merge tag 'trace-ipi-tracepoints' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull IPI tracepoints for ARM from Steven Rostedt:
 "Nicolas Pitre added generic tracepoints for tracing IPIs and updated
  the arm and arm64 architectures.  It required some minor updates to
  the generic tracepoint system, so it had to wait for me to implement
  them"

* tag 'trace-ipi-tracepoints' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ARM64: add IPI tracepoints
  ARM: add IPI tracepoints
  tracepoint: add generic tracepoint definitions for IPI tracing
  tracing: Do not do anything special with tracepoint_string when tracing is disabled
 2014-08-09 17:33:44 -07:00
Linus Torvalds
77e40aae76 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace 
Pull namespace updates from Eric Biederman:
 "This is a bunch of small changes built against 3.16-rc6.  The most
  significant change for users is the first patch which makes setns
  drmatically faster by removing unneded rcu handling.

  The next chunk of changes are so that "mount -o remount,.." will not
  allow the user namespace root to drop flags on a mount set by the
  system wide root.  Aks this forces read-only mounts to stay read-only,
  no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec
  mounts to stay no exec and it prevents unprivileged users from messing
  with a mounts atime settings.  I have included my test case as the
  last patch in this series so people performing backports can verify
  this change works correctly.

  The next change fixes a bug in NFS that was discovered while auditing
  nsproxy users for the first optimization.  Today you can oops the
  kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever
  with pid namespaces.  I rebased and fixed the build of the
  !CONFIG_NFS_FS case yesterday when a build bot caught my typo.  Given
  that no one to my knowledge bases anything on my tree fixing the typo
  in place seems more responsible that requiring a typo-fix to be
  backported as well.

  The last change is a small semantic cleanup introducing
  /proc/thread-self and pointing /proc/mounts and /proc/net at it.  This
  prevents several kinds of problemantic corner cases.  It is a
  user-visible change so it has a minute chance of causing regressions
  so the change to /proc/mounts and /proc/net are individual one line
  commits that can be trivially reverted.  Unfortunately I lost and
  could not find the email of the original reporter so he is not
  credited.  From at least one perspective this change to /proc/net is a
  refgression fix to allow pthread /proc/net uses that were broken by
  the introduction of the network namespace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts
  proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net
  proc: Implement /proc/thread-self to point at the directory of the current thread
  proc: Have net show up under /proc/<tgid>/task/<tid>
  NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes
  mnt: Add tests for unprivileged remount cases that have found to be faulty
  mnt: Change the default remount atime from relatime to the existing value
  mnt: Correct permission checks in do_remount
  mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount
  mnt: Only change user settable mount flags in remount
  namespaces: Use task_lock and not rcu to protect nsproxy
 2014-08-09 17:10:41 -07:00
Linus Torvalds
0d10c2c170 Merge branch 'for-3.17' of git://linux-nfs.org/~bfields/linux 
Pull nfsd updates from Bruce Fields:
 "This includes a major rewrite of the NFSv4 state code, which has
  always depended on a single mutex.  As an example, open creates are no
  longer serialized, fixing a performance regression on NFSv3->NFSv4
  upgrades.  Thanks to Jeff, Trond, and Benny, and to Christoph for
  review.

  Also some RDMA fixes from Chuck Lever and Steve Wise, and
  miscellaneous fixes from Kinglong Mee and others"

* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
  svcrdma: remove rdma_create_qp() failure recovery logic
  nfsd: add some comments to the nfsd4 object definitions
  nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
  nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
  nfsd: remove nfs4_lock_state: nfs4_laundromat
  nfsd: Remove nfs4_lock_state(): reclaim_complete()
  nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
  nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
  nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
  nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
  nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
  nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
  nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
  nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
  nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
  nfsd: remove old fault injection infrastructure
  nfsd: add more granular locking to *_delegations fault injectors
  nfsd: add more granular locking to forget_openowners fault injector
  nfsd: add more granular locking to forget_locks fault injector
  nfsd: add a list_head arg to nfsd_foreach_client_lock
  ...
 2014-08-09 14:31:18 -07:00
Linus Torvalds
63b12bdb0d Merge branch 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc 
Pull arch signal handling cleanup from Richard Weinberger:
 "This patch series moves all remaining archs to the get_signal(),
  signal_setup_done() and sigsp() functions.

  Currently these archs use open coded variants of the said functions.
  Further, unused parameters get removed from get_signal_to_deliver(),
  tracehook_signal_handler() and signal_delivered().

  At the end of the day we save around 500 lines of code."

* 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits)
  powerpc: Use sigsp()
  openrisc: Use sigsp()
  mn10300: Use sigsp()
  mips: Use sigsp()
  microblaze: Use sigsp()
  metag: Use sigsp()
  m68k: Use sigsp()
  m32r: Use sigsp()
  hexagon: Use sigsp()
  frv: Use sigsp()
  cris: Use sigsp()
  c6x: Use sigsp()
  blackfin: Use sigsp()
  avr32: Use sigsp()
  arm64: Use sigsp()
  arc: Use sigsp()
  sas_ss_flags: Remove nested ternary if
  Rip out get_signal_to_deliver()
  Clean up signal_delivered()
  tracehook_signal_handler: Remove sig, info, ka and regs
  ...
 2014-08-09 09:58:12 -07:00
Linus Torvalds
f7dbaef505 Merge branch 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 
Pull i2c updates from Wolfram Sang:
 "Highlights:

   - class based instantiation finally dropped for most embedded drivers
     bringing boot up performance gains
   - removed two drivers (one outdated, one a duplicate)
   - ACPI has now operation region support (thanks to Lan Tianyu)
   - the i2c-stub driver got overhauled and gained new features to
     become more useful when writing i2c client drivers (thanks to
     Guenter Roeck and Jean Delvare)

  The rest is driver bugfixes, added bindings/ids, cleanups..."

* 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (43 commits)
  i2c: mpc: delete unneeded test before of_node_put
  i2c: rk3x: fix interrupt handling issue
  i2c: imx: Fix format warning for dev_dbg
  i2c: qup: disable clks and return instead of just returning error
  i2c: exynos5: always enable HSI2C
  i2c: designware: add new bindings
  i2c: gpio: Drop dead code in i2c_gpio_remove
  i2c: pca954x: put the mux to disconnected state after resume
  i2c: st: Update i2c timings
  drivers/i2c/busses: use correct type for dma_map/unmap
  i2c: i2c-st: Use %pa to print 'resource_size_t' type
  i2c: s3c2410: resume the I2C controller earlier
  i2c: stub: Avoid an array overrun on I2C block transfers
  i2c: i801: Add device ID for Intel Wildcat Point PCH
  i2c: i801: Fix the alignment of the device table
  i2c: stub: Add support for banked register ranges
  i2c: stub: Remember the number of emulated chips
  i2c: stub: Add support for SMBus block commands
  i2c: efm32: correct namespacing of location property
  i2c: exynos5: remove extra line and fix an assignment
  ...
 2014-08-09 09:15:07 -07:00
Linus Torvalds
c309bfa9b4 MTD updates for 3.17-rc1 
AMD-compatible CFI driver:
  - Support OTP programming for Micron M29EW family
  - Increase buffer write timeout, according to detected flash parameter info
 
 NAND
  - Add helpers for retrieving ONFI timing modes
  - GPMI: provide option to disable bad block marker swapping (required for
      Ka-On electronics platforms)
 
 SPI NOR
  - EON EN25QH128 support
  - Support new Flag Status Register (FSR) on a few Micron flash
 
 Common
  - New sysfs entries for bad block and ECC stats
 
 And a few miscellaneous refactorings, cleanups, and driver improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5WCXAAoJEFySrpd9RFgt0rwP/1anAulAcve/QzVF9LDFPec8
 jSvK8WWFcHLVb9EvTHtUjRz2RSRNhe0eeyEld3WpdKZZ73VVVaHnGdJv8J8Ys8jn
 kfNBDfgDLFrVzycYCqjQ2gdvidCyrjQgtPP0E/Q/RN6FBur0/rp2WKoJ2FvuT6SS
 kOz5f3TOe+iNtxQoJwkFvs/IjfFMThGs+YMJ8Z9s4LcJHD65T6hF+zDwl8xF2xfG
 b104PsG3I58kJdYjKhRQ2/ol+YCPoVhQorhhuaqeouZum/Hb/2g3rKHVZpAv2n6m
 JWnTpbdJDqGoPFVPyJr5Vm/UYOwxEBSWimuNp+2WN7EsXux1x9JZZl5+ZNUMmb4q
 vxYhIDul2+Sg1lN+ruBe+xi6d8DI8Y5WIc9xJgn3YHLC8YSkiZ11bhQyyeHA9i5h
 jZYKSkN/ERl8iAA4ULD6tsZv4ds8LVI/XOxrcSM7myQ4p8oY5QBxEWEuGPgyH6A6
 qCVkc0TAriSPfcCBvs4o8s2uNUocq7x6ZT1xfdlJ0KVstCmeEJBJnBYwWIXR3tu7
 3+I/bI41Q29ZGV8x5PEGDSgLVDNAJZnfGPuCwdMWuVD7UQuEEOJkCvy8o7C2Fold
 hRXh3SlUICCGDzd0JdNmdt5hPuB0tzsG0YkRoRj2sS30TlHi77nN/m3HYi/JQ4UW
 gA21laizfJ+z7g/5Kabb
 =Wkmz
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "AMD-compatible CFI driver:
   - Support OTP programming for Micron M29EW family
   - Increase buffer write timeout, according to detected flash
     parameter info

  NAND
   - Add helpers for retrieving ONFI timing modes
   - GPMI: provide option to disable bad block marker swapping (required
     for Ka-On electronics platforms)

  SPI NOR
   - EON EN25QH128 support
   - Support new Flag Status Register (FSR) on a few Micron flash

  Common
   - New sysfs entries for bad block and ECC stats

  And a few miscellaneous refactorings, cleanups, and driver
  improvements"

* tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd: (31 commits)
  mtd: gpmi: make blockmark swapping optional
  mtd: gpmi: remove line breaks from error messages and improve wording
  mtd: gpmi: remove useless (void *) type casts and spaces between type casts and variables
  mtd: atmel_nand: NFC: support multiple interrupt handling
  mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bit
  mtd: atmel_nand: add NFC status error check
  mtd: atmel_nand: make ecc parameters same as definition
  mtd: nand: add ONFI timing mode to nand_timings converter
  mtd: nand: define struct nand_timings
  mtd: cfi_cmdset_0002: fix do_write_buffer() timeout error
  mtd: denali: use 8 bytes for READID command
  mtd/ftl: fix the double free of the buffers allocated in build_maps()
  mtd: phram: Fix whitespace issues
  mtd: spi-nor: add support for EON EN25QH128
  mtd: cfi_cmdset_0002: Add support for locking OTP memory
  mtd: cfi_cmdset_0002: Add support for writing OTP memory
  mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory
  mtd: cfi_cmdset_0002: Add support for reading OTP
  mtd: spi-nor: add support for flag status register on Micron chips
  mtd: Account for BBT blocks when a partition is being allocated
  ...
 2014-08-08 18:13:21 -07:00
Linus Torvalds
9e9ac89666 fbdev changes for 3.17 
* Much better HDMI infoframe support for OMAP
 * Cirrus Logic CLPS711X framebuffer driver
 * DT support for PL11x CLCD driver
 * Various small fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5LUrAAoJEPo9qoy8lh71G2kP/RyomOV8mOPErkVgslJukMlW
 iJO/Y47GcnHzosKK+7u8MUXlpbBdZjyoaKJxuh+D1OL0vc/LrSar4IwicqqGcD2C
 l5N8b9NytOf+sjtYuD24xkGo9bLr8vkaVNC3cgPNjE/x1kgRrtHoap1NOlv8vvuT
 OnbSkRdg/oENrdzwWjwJeayvT5a3TxLJY5JM9IMTzw6CKROIYScEmHUsy0jH2h/g
 60OrGPdzmPPutUKA/ZWe8Nu0Mhf4GcOeIl8CZ/u7ZyME7NKezyF0iATpMzn3+ylf
 9GafGbsxwgNW2KwoF379w6CV49UNyQhx4qxlkg8/N2km6ot6s1WoJrb/32qPu05J
 Wydfbovxo9elM/144m47a89TR4xV6Ia35kbSDmwrR7gmKjIDUE34Ruc7RdCLdO8n
 SxIG5724pktKlP1bdOT6gCLFnDq6vFK0gNnWwlCRKWnwg0H+Cyg5S07BNEF7/dvO
 gOkRPuyWz3m4rlpl9dL+TW+jaQR/FQAAgf8pUdjBeUTogUTvWf2NBb3H1bKoAnaE
 4fhLwE1qUxep3rhOqOpLbGzDmpvt0ebcNJzseypaSTO9c8QNbZJkxLLC1jchUjPj
 6FP4/SocuySik3on6Qulj6xGrp4zskBnjsTXOIZzxXjByX6uf/DNWPHEcEM9zIEk
 u0trGuXxlx8JkRkV/7aE
 =gXX+
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - much better HDMI infoframe support for OMAP
 - Cirrus Logic CLPS711X framebuffer driver
 - DT support for PL11x CLCD driver
 - various small fixes

* tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: DSI: fix depopulating dsi peripherals
  video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic
  video: ARM CLCD: Fix DT-related build problems
  drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
  video: ARM CLCD: Add DT support
  drm/omap: Add infoframe & dvi/hdmi mode support
  OMAPDSS: HDMI: remove the unused code
  OMAPDSS: HDMI5: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI4: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields
  OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015
  OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver
  OMAPDSS: HDMI: remove custom avi infoframe
  OMAPDSS: HDMI5: use common AVI infoframe support
  OMAPDSS: HDMI4: use common AVI infoframe support
  OMAPDSS: Kconfig: select HDMI
  OMAPDSS: HDMI: fix name conflict
  OMAPDSS: DISPC: clean up dispc_mgr_timings_ok
  OMAPDSS: DISPC: reject interlace for lcd out
  OMAPDSS: DISPC: fix debugfs reg dump
  ...
 2014-08-08 18:09:33 -07:00
Linus Torvalds
06b49ea43c This is the bulk of GPIO changes for the v3.17 development 
cycle, and this time we got a lot of action going on and
 it will continue:
 
 - The core GPIO library implementation has been split up in
   three different files:
   - gpiolib.c for the latest and greatest and shiny GPIO
     library code using GPIO descriptors only
   - gpiolib-legacy.c for the old integer number space API
     that we are phasing out gradually
   - gpiolib-sysfs.c for the sysfs interface that we are
     not entirely happy with, but has to live on for
     ABI compatibility
 
 - Add a flags argument to *gpiod_get* functions, with some
   backward-compatibility macros to ease transitions. We
   should have had the flags there from the beginning it
   seems, now we need to clean up the mess. There is a plan
   on how to move forward here devised by Alexandre Courbot
   and Mark Brown.
 
 - Split off a special <linux/gpio/machine.h> header for the
   board gpio table registration, as per example from the
   regulator subsystem.
 
 - Start to kill off the return value from gpiochip_remove()
   by removing the __must_check attribute and removing all
   checks inside the drivers/gpio directory. The rationale
   is: well what were we supposed to do if there is an error
   code? Not much: print an error message. And gpiolib already
   does that. So make this function return void eventually.
 
 - Some cleanups of hairy gpiolib code, make some functions
   not to be used outside the library private and make sure
   they are not exported, remove gpiod_lock/unlock_as_irq()
   as the existing function is for driver-internal use and
   fine as it is, delete gpio_ensure_requested() as it is
   not meaningful anymore.
 
 - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one()
   function calls, which is logical since this is already
   supported when referencing GPIOs from e.g. device trees.
 
 - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use
   the gpiolib irqchip helpers cutting down on GPIO irqchip
   boilerplate a bit more.
 
 - New driver for the Zynq GPIO block.
 
 - The usual incremental improvements around a bunch of
   drivers.
 
 - Janitorial syntactic and semantic cleanups by Jingoo Han,
   and Rickard Strandqvist especially.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5Ji9AAoJEEEQszewGV1zch8QAKp67+8ScxRBf/7RCSV6U/dy
 i7kt+nP4au/TScwtjbX264DM8hroW7BzN+GqF10NEFeGkYDR+42lMav9PrNjtKtk
 ojQPWdoGWzwwL0wa4j9rsuG/pRnbAEgDWPb+EkFdHQsLl6h71fyVoLOK+gKwJFyn
 aPYGXyNbT1FN38oj1rarENiOUxM7VMXvcJFfvDYFdDDhCS4PLYPOMw0lrsGtsHMZ
 epDa4z3yt4zHgYiUIT578nQ7EkIbGN3goywk3NQ+9WDQG+sLFHh4BdqcRKg6b9VM
 I64+47uNQxkyvWCvcLma5ziqvtNQk113986g+cv5YeTh18Ajyio1kxEIZM181eBk
 ITUPGrAorWHPLGNbe3psLmtK3+/BwmWIurPmHpckuW8d2JWWSVe0oepkUuqDwu/w
 lUB5KtM0joFOr5k61fj5tCKxH344jc1zvHJ/N+bVYilbOMvunWzuMJlc4hADIGC2
 1uxUAcPbYUAphGaxhdMBca9ellm0lWG19Gj5TtdGbRtNgp6R2qrwI66DDzk+1kLR
 8Szx6KHQdEHFTlCLKSIAMv33p1ClfmNikhdicT3urwR8PeXmmTR1pD7kGmVTDDZa
 gXSU5EilgGpak+77j/GZ2Ivp0Qt5M97UwWlZ7zTp++T1ZY+wwTHJI/09qcoWYjdz
 IpZRIqrQchalbscpn3LY
 =e+d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO update from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.17 development cycle, and
  this time we got a lot of action going on and it will continue:

   - The core GPIO library implementation has been split up in three
     different files:
     - gpiolib.c for the latest and greatest and shiny GPIO library code
       using GPIO descriptors only
     - gpiolib-legacy.c for the old integer number space API that we are
       phasing out gradually
     - gpiolib-sysfs.c for the sysfs interface that we are not entirely
       happy with, but has to live on for ABI compatibility

   - Add a flags argument to *gpiod_get* functions, with some
     backward-compatibility macros to ease transitions.  We should have
     had the flags there from the beginning it seems, now we need to
     clean up the mess.  There is a plan on how to move forward here
     devised by Alexandre Courbot and Mark Brown

   - Split off a special <linux/gpio/machine.h> header for the board
     gpio table registration, as per example from the regulator
     subsystem

   - Start to kill off the return value from gpiochip_remove() by
     removing the __must_check attribute and removing all checks inside
     the drivers/gpio directory.  The rationale is: well what were we
     supposed to do if there is an error code? Not much: print an error
     message.  And gpiolib already does that.  So make this function
     return void eventually

   - Some cleanups of hairy gpiolib code, make some functions not to be
     used outside the library private and make sure they are not
     exported, remove gpiod_lock/unlock_as_irq() as the existing
     function is for driver-internal use and fine as it is, delete
     gpio_ensure_requested() as it is not meaningful anymore

   - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function
     calls, which is logical since this is already supported when
     referencing GPIOs from e.g. device trees

   - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib
     irqchip helpers cutting down on GPIO irqchip boilerplate a bit more

   - New driver for the Zynq GPIO block

   - The usual incremental improvements around a bunch of drivers

   - Janitorial syntactic and semantic cleanups by Jingoo Han, and
     Rickard Strandqvist especially"

* tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits)
  MAINTAINERS: update GPIO include files
  gpio: add missing includes in machine.h
  gpio: add flags argument to gpiod_get*() functions
  MAINTAINERS: Update Samsung pin control entry
  gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
  gpio: lynxpoint: Convert to use gpiolib irqchip
  gpio: split gpiod board registration into machine header
  gpio: remove gpio_ensure_requested()
  gpio: remove useless check in gpiolib_sysfs_init()
  gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc
  gpio: move gpio_ensure_requested() into legacy C file
  gpio: remove gpiod_lock/unlock_as_irq()
  gpio: make gpiochip_get_desc() gpiolib-private
  gpio: simplify gpiochip_export()
  gpio: remove export of private of_get_named_gpio_flags()
  gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions
  gpio: zynq: Clear pending interrupt when enabling a IRQ
  gpio: drop retval check enforcing from gpiochip_remove()
  gpio: remove all usage of gpio_remove retval in driver/gpio
  devicetree: Add Zynq GPIO devicetree bindings documentation
  ...
 2014-08-08 18:00:35 -07:00
Linus Torvalds
664fb23070 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 
Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...
 2014-08-08 17:39:48 -07:00
Linus Torvalds
8065be8d03 Merge branch 'akpm' (second patchbomb from Andrew Morton) 
Merge more incoming from Andrew Morton:
 "Two new syscalls:

     memfd_create in "shm: add memfd_create() syscall"
     kexec_file_load in "kexec: implementation of new syscall kexec_file_load"

  And:

   - Most (all?) of the rest of MM

   - Lots of the usual misc bits

   - fs/autofs4

   - drivers/rtc

   - fs/nilfs

   - procfs

   - fork.c, exec.c

   - more in lib/

   - rapidio

   - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs,
     fs/cramfs, fs/romfs, fs/qnx6.

   - initrd/initramfs work

   - "file sealing" and the memfd_create() syscall, in tmpfs

   - add pci_zalloc_consistent, use it in lots of places

   - MAINTAINERS maintenance

   - kexec feature work"

* emailed patches from Andrew Morton <akpm@linux-foundation.org: (193 commits)
  MAINTAINERS: update nomadik patterns
  MAINTAINERS: update usb/gadget patterns
  MAINTAINERS: update DMA BUFFER SHARING patterns
  kexec: verify the signature of signed PE bzImage
  kexec: support kexec/kdump on EFI systems
  kexec: support for kexec on panic using new system call
  kexec-bzImage64: support for loading bzImage using 64bit entry
  kexec: load and relocate purgatory at kernel load time
  purgatory: core purgatory functionality
  purgatory/sha256: provide implementation of sha256 in purgaotory context
  kexec: implementation of new syscall kexec_file_load
  kexec: new syscall kexec_file_load() declaration
  kexec: make kexec_segment user buffer pointer a union
  resource: provide new functions to walk through resources
  kexec: use common function for kimage_normal_alloc() and kimage_crash_alloc()
  kexec: move segment verification code in a separate function
  kexec: rename unusebale_pages to unusable_pages
  kernel: build bin2c based on config option CONFIG_BUILD_BIN2C
  bin2c: move bin2c in scripts/basic
  shm: wait for pins to be released when sealing
  ...
 2014-08-08 15:57:47 -07:00
Vivek Goyal
8e7d838103 kexec: verify the signature of signed PE bzImage 
This is the final piece of the puzzle of verifying kernel image signature
during kexec_file_load() syscall.

This patch calls into PE file routines to verify signature of bzImage.  If
signature are valid, kexec_file_load() succeeds otherwise it fails.

Two new config options have been introduced.  First one is
CONFIG_KEXEC_VERIFY_SIG.  This option enforces that kernel has to be
validly signed otherwise kernel load will fail.  If this option is not
set, no signature verification will be done.  Only exception will be when
secureboot is enabled.  In that case signature verification should be
automatically enforced when secureboot is enabled.  But that will happen
when secureboot patches are merged.

Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG.  This option
enables signature verification support on bzImage.  If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.

I tested these patches with both "pesign" and "sbsign" signed bzImages.

I used signing_key.priv key and signing_key.x509 cert for signing as
generated during kernel build process (if module signing is enabled).

Used following method to sign bzImage.

pesign
======
- Convert DER format cert to PEM format cert
openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform
PEM

- Generate a .p12 file from existing cert and private key file
openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in
signing_key.x509.PEM

- Import .p12 file into pesign db
pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign

- Sign bzImage
pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign
-c "Glacier signing key - Magrathea" -s

sbsign
======
sbsign --key signing_key.priv --cert signing_key.x509.PEM --output
/boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+

Patch details:

Well all the hard work is done in previous patches.  Now bzImage loader
has just call into that code and verify whether bzImage signature are
valid or not.

Also create two config options.  First one is CONFIG_KEXEC_VERIFY_SIG.
This option enforces that kernel has to be validly signed otherwise kernel
load will fail.  If this option is not set, no signature verification will
be done.  Only exception will be when secureboot is enabled.  In that case
signature verification should be automatically enforced when secureboot is
enabled.  But that will happen when secureboot patches are merged.

Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG.  This option
enables signature verification support on bzImage.  If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:33 -07:00
Vivek Goyal
6a2c20e7d8 kexec: support kexec/kdump on EFI systems 
This patch does two things.  It passes EFI run time mappings to second
kernel in bootparams efi_info.  Second kernel parse this info and create
new mappings in second kernel.  That means mappings in first and second
kernel will be same.  This paves the way to enable EFI in kexec kernel.

This patch also prepares and passes EFI setup data through bootparams.
This contains bunch of information about various tables and their
addresses.

These information gathering and passing has been written along the lines
of what current kexec-tools is doing to make kexec work with UEFI.

[akpm@linux-foundation.org: s/get_efi/efi_get/g, per Matt]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:33 -07:00
Vivek Goyal
27f48d3e63 kexec-bzImage64: support for loading bzImage using 64bit entry 
This is loader specific code which can load bzImage and set it up for
64bit entry.  This does not take care of 32bit entry or real mode entry.

32bit mode entry can be implemented if somebody needs it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:33 -07:00
Vivek Goyal
12db5562e0 kexec: load and relocate purgatory at kernel load time 
Load purgatory code in RAM and relocate it based on the location.
Relocation code has been inspired by module relocation code and purgatory
relocation code in kexec-tools.

Also compute the checksums of loaded kexec segments and store them in
purgatory.

Arch independent code provides this functionality so that arch dependent
bootloaders can make use of it.

Helper functions are provided to get/set symbol values in purgatory which
are used by bootloaders later to set things like stack and entry point of
second kernel etc.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:32 -07:00
Vivek Goyal
cb1052581e kexec: implementation of new syscall kexec_file_load 
Previous patch provided the interface definition and this patch prvides
implementation of new syscall.

Previously segment list was prepared in user space.  Now user space just
passes kernel fd, initrd fd and command line and kernel will create a
segment list internally.

This patch contains generic part of the code.  Actual segment preparation
and loading is done by arch and image specific loader.  Which comes in
next patch.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:32 -07:00
Vivek Goyal
f0895685c7 kexec: new syscall kexec_file_load() declaration 
This is the new syscall kexec_file_load() declaration/interface.  I have
reserved the syscall number only for x86_64 so far.  Other architectures
(including i386) can reserve syscall number when they enable the support
for this new syscall.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:32 -07:00
Vivek Goyal
815d5704a3 kexec: make kexec_segment user buffer pointer a union 
So far kexec_segment->buf was always a user space pointer as user space
passed the array of kexec_segment structures and kernel copied it.

But with new system call, list of kexec segments will be prepared by
kernel and kexec_segment->buf will point to a kernel memory.

So while I was adding code where I made assumption that ->buf is pointing
to kernel memory, sparse started giving warning.

Make ->buf a union.  And where a user space pointer is expected, access it
using ->buf and where a kernel space pointer is expected, access it using
->kbuf.  That takes care of sparse warnings.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:32 -07:00
Vivek Goyal
8c86e70ace resource: provide new functions to walk through resources 
I have added two more functions to walk through resources.

Currently walk_system_ram_range() deals with pfn and /proc/iomem can
contain partial pages.  By dealing in pfn, callback function loses the
info that last page of a memory range is a partial page and not the full
page.  So I implemented walk_system_ram_res() which returns u64 values to
callback functions and now it properly return start and end address.

walk_system_ram_range() uses find_next_system_ram() to find the next ram
resource.  This in turn only travels through siblings of top level child
and does not travers through all the nodes of the resoruce tree.  I also
need another function where I can walk through all the resources, for
example figure out where "GART" aperture is.  Figure out where ACPI memory
is.

So I wrote another function walk_iomem_res() which walks through all
/proc/iomem resources and returns matches as asked by caller.  Caller can
specify "name" of resource, start and end and flags.

Got rid of find_next_system_ram_res() and instead implemented more generic
find_next_iomem_res() which can be used to traverse top level children
only based on an argument.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:32 -07:00
Vivek Goyal
7d3e2bca22 kexec: rename unusebale_pages to unusable_pages 
Let's use the more common "unusable".

This patch was originally written and posted by Boris. I am including it
in this patch series.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-08 15:57:32 -07:00