Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable swap.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable temp.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid spamming the logs on non-ECC boards.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing warning/compile errors on 32bit kernels.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kcalloc instead of kzalloc and the cast on the return from kzalloc is
unnecessary and can be removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no guarantee that the next entry on the ddelete list stays on
the list when we drop the locks.
Completely rework this mess by moving processed entries on a temporary
list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The code path isn't hit at the moment, but we need to take the lock to
add the BO back to the LRU.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't even try to resize the BAR when there is no window above 4GB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes static checker warning of
"warn: cast after binop" introduced by
56087b31 drm/amd/display: fix high part address in dm_plane_helper_prepare_fb()
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
virtual DCE Timer structure is already released
after its sw_fini(), so we need to cancel the
its Timer in hw_fini() otherwise the Timer canceling
is missed.
v2:
use for loop and num_crtc to replace original code
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this fix the issue that access memory after freed
after driver unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use bo_create/free_kernel instead of manually doing it
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
instead of doing it in each GFX ip's sw_fini
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NULL pointer is because original logic will step into
set_pde_pte() even after the gart.ptr is freed due to
there are twice gart_unbind() on all gart area.
also, there are other minor fixes:
1,since gart_init only create dummy page, the corresponding
gart_fini shouldn't do more like unbinding all GART, this is
unnecessary because in driver fini stage all GART unbinding
had already been done during each IP's SW_FINI (GMC's
SW_FINI is the last one called), so remove the step
for the GART unbinding in gart_fini().
2,gart_fini() is already invoked during each GMC IP's gart_fini
routine,e.g. gmc_vx_0_gart_fini(), so no need to manually
call it during ttm_fini().
3,amdgpu_gem_force_release() should be put ahead of
amdgpu_vm_manager_fini()
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for gart_ram_alloc/free, they are never used in driver thus
ripe them out totally.
for gart_vram_pin/unpin, they are not needed becuase we can
use bo_creat_kernel/free to replace the original manual way
in the gart_vram_alloc/free, thus gart_vram_pin/unpin can
also be riped out.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be triggered by userspace, e.g. trying to allocate too large a
BO, so it shouldn't log anything by default.
Callers need to handle failure anyway.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
keep consistency with threshold of swapout
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make initialization code check the ECC related registers, which are initialized
by the VBIOS, to see if ECC is present and initialized and DRM_INFO() the
result.
Signed-off-by: David Panariti <David.Panariti@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add header files with ECC related definitions
(MASKs, SHIFTs, DEFAULTs and OFFSETS).
Signed-off-by: David Panariti <David.Panariti@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Deleted BOs with the same reservation object can be reaped even if they
can't be reserved.
v2: rebase and we still need to remove/add the BO from/to the LRU.
v3: fix remove/add one more time, cleanup the logic a bit
v4: we should still check if the eviction is valuable
v5: add comment suggested by Michel
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached values rather than hardcoding it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached values rather than hardcoding it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached values rather than hardcoding it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
on stream_for_cursor. Initialize to NULL.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We still require the update_plane_addr call in commit_planes_for_stream.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed for the next patch.
v2: actually predicate all unlocks
v3: add some cleanups suggested by Michel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to have this as a vtable. The vtable was initially
used for stream_adjust_vmin_vmax but the condition checked here
(set_drr) is always true, hence we don't need to assign this
dynamically anymore.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for video scaling changes,
Reduce reg access count from 1044 to 447, duration time
from 4.6ms to 3ms.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'struct mpc *mpc' is not used.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to properly clear and set the update flags for all cases.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also initialize this to 64 for all ASICs.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
plane update prior to stream enablement is there to recombine pipe
in case we need free pipe for new display. need to pass in new state
or we will just re-applyingwhat we already have
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way, we can know exactly what triggered the update type we're
looking at, and we can simplify the logic for determining what exactly
needs to be updated in the future.
Also allow a dst rect size increase to go through a medium update,
since that does not require us to increase clock or bandwidth.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't be able to get a non-visible plane into DC anymore.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fail goto is incorrect. It will incorrectly release the dc_states on
stream programming failure.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a follow-up to the following change:
Yongqiang Sun: Program front end first when set mode.
Due to pipe-splitting features, how we handle stream enabling and
disabling needs to change.
In the case of pipe split disable, two planes need to be combined back
into the same stream. This needs to be done before any stream
programming happens.
The previous patch addresses this, but breaks cross-platform
compatibility. It's not guaranteed that a dc commit will be called
separately to program planes and streams.
Therefore, we handle the combined commit case by doing plane programming
both before and after stream programming, to handle pipe split disable
and plane enable respectively.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When disabling pipe splitting, we need to make sure we disable both
planes used.
This should be done for Linux as well.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of update type is medium, optimize squence,
reduce programing time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
also simplifying syntax and removing unused variable in
dce110_apply_ctx_for_surface()
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power on one plane after disable all the planes, for
a hw bug work around to resolve stutter efficiency issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it so that differing dcc and plane size fields don't necessarily
result in a full update, along with upscaling modes. This allows us to
save some unnecessary full updates.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
output signal used to be a public member to be used by DM to override
the stream signal. Now since there is no longer separation between
public and private part of stream, they are combined. The overriding
was not working properly as well, which is addressed by this change
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arr_points[1] and [2] were duplicated. Remove the extra
one. If we ever need more points we can add them but the
current state of affairs is confusing.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temporary solution to fix gamma adjustment not
working.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New scaler parameter assign to dpp is after early return,
cause next flip scaler not program.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ALLOW_SR registers might not always be available.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU can future lower voltages in long idle case when all display is off.
If all display output is turned off via DPMS, send display_count = 0
after all output are turned off.
otherwise send display_count msg before turning on display to make sure
SMU exit S0i2 state. before is not neccessary as we are out of S0i2
when driver execute code, but send message before anyways for correctness.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimized front end initial sequence, reset MPC module
properly.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When new coefficients match cached we would skip setting regamma mode
Also, when doing a stream update we would program regamma for all pipes,
even thos that are not yet powered on. This resulted in never setting
regamma since we would cache before the pipe is powered.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trying to align with kernel coding style and make it a bit more
readable.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are different code to disable front end, it is
difficult to debug and adding new process.
This refactor makes all disable front end call the same
functions.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Yuehin Lau <Yuehin.Lau@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a function to blank data using OPP DPG.
Clean up code to prepare for pseudocode review with HW.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This saves us about 5000 reg writes per full update. This translates to about
40000 writes over the course of single eDP bootup.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_link is at a higher level than link_encoder, and we only want
higher-level components to be able to access lower-level ones,
not the other way around.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previous code threw a warning about misleading indentation
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear OPTC underflow status when init_hw.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also move some register definitions to common DCN regs.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no logic change
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
following the naming convention with correct prefix
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn version of update_dchub now uses hubbub instead of hwseq
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable pf2vf_ver is assigned but never read, it is redundant and
hence can be removed.
Cleans up clang warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:310:3: warning: Value stored
to 'pf2vf_ver' is never read
Reivewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When UVD bo is created, its size is based on the information from firmware
header (ucode_size_bytes). The same value should be be used when programming
UVD mc controller offsets, otherwise it can happen that
(mmUVD_VCPU_CACHE_OFFSET2 + mmUVD_VCPU_CACHE_SIZE2) will point
AMDGPU_GPU_PAGE_SIZE bytes after the UVD bo end.
Second issue is that when programming the mmUVD_VCPU_CACHE_SIZE0 register,
AMDGPU_UVD_FIRMWARE_OFFSET should be taken into account. If it isn't,
(mmUVD_VCPU_CACHE_OFFSET2 + mmUVD_VCPU_CACHE_SIZE2) will always point
AMDGPU_UVD_FIRMWARE_OFFSET bytes after the UVD bo end.
v2: move firmware size calculation into macro definition
v3: align firmware size to the gpu page size
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Piotr Redlewski <predlewski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This feature synchronizes multiple displays with various timings
to a display with the highest refresh rate
it is enabled if edid caps flag multi_display_sync is set to one
There are limitations on refresh rates allowed
that can be synchronized. That would
prevent from underflow and other potential
corruptions.
Multi display synchronization is using the
same functions as timing_sync in order to minimize
redunduncy and decision to disable synchronization is
based on trigger parametre set in DM
Feature is developed for DCN1 and DCE11
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Validates BO size against each requested domain's total memory.
v2:
Make GTT size check a MUST to allow fall back to GTT.
Rmove redundant NULL check.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's pointless to have the same value twice, just always use max_pfn.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure what that should originally been good for, but it doesn't seem
to make any sense any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, they could be optimized by scheduled fence.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do ring clear before ring test, otherwise compute ring test will
fail after gpu resetting. Still can't find the root cause, just
workaround it.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just another alias for ttm_bo_unreserve.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consistently use the reservation object wrappers instead of accessing
the ww_mutex directly.
Additional to that use the reservation object wrappers directly instead of
calling __ttm_bo_reserve with fixed parameters.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having a confusing wrapper or call the underlying ww_mutex
function directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed for the next patch and makes the code quite a bit easier to
understand.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We must remove the fence callback.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retry at drm_dev_register instead of amdgpu_device_init.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We no longer set the framebuffer address here so this is now
dead code.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if app close CTX right after IB submit, gpu recover
will fail to find out the entity behind this guilty
job thus lead to no job skipping for this guilty job.
to fix this corner case just move the increasement of
job->karma out of the entity iteration.
v2:
only do karma increasment if bad->s_priority != KERNEL
because we always consider KERNEL job be correct and always
want to recover an unfinished kernel job (sometimes kernel
job is interrupted by VF FLR or other GPU hang event)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It introduces 900ms latency in exclusive mode which causes failure
of driver loading. Host can resize the BAR before guest staring,
so the resizing is not necessary here.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just allocate the GART space and fill it.
This prevents forcing the BO to be idle.
v2: don't unbind/bind at all, just fill the allocated GART space
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We actually don't bind here, but rather allocate GART space if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Try to resize BAR0 to let CPU access all of VRAM.
v2: rebased, style cleanups, disable mem decode before resize,
handle gmc_v9 as well, round size up to power of two.
v3: handle gmc_v6 as well, release and reassign all BARs in the driver.
v4: rename new function to amdgpu_device_resize_fb_bar,
reenable mem decoding only if all resources are assigned.
v5: reorder resource release, return -ENODEV instead of BUG_ON().
v6: squash in rebase fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous solution will create a zero buffer on the system
domain and then move the zeroes to the VRAM. This will break the
original data on the VRAM.
Refine the code to create bo on VRAM domain directly and then remove
and re-create mem node to the exact position before bo_pin. This can
avoid breaking the data and will not cause eviction.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is caused of that hypervisor fails to handle request, one known
issue is MMIO unblocking timeout. In theory we can retry init here.
Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Sun Gary <Gary.Sun@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's dead code.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used anymore.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corresponding to the previous non-DC change.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardcoding the maximum numbers could result in spurious error messages
from the IRQ state callbacks, e.g. on Polaris 11/12:
[drm:dce_v11_0_set_pageflip_irq_state [amdgpu]] *ERROR* invalid pageflip crtc 5
[drm:amdgpu_irq_disable_all [amdgpu]] *ERROR* error disabling interrupt (-22)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We'll need it in amdgpu_dm_mst_types.c as well.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix memory leak
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to move HDR Metadata from Surface to Stream since there is only one
infoframe possible per stream.
Also cleaning up some duplicate definitions.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
instantiating new structure hubbub in resource.c
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add disable ttu interface to dcn10, when remove
mpc, disable ttu as well.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since front end is programmed before back end programming,
no need to reset front end in back end programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
front end is initialized during init_hw, but not
power gated. There are some left over valuse and will
cause some diags test failed. Power gated all front
end pipes will make sure every test has same starting
point.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be sticking with the default clock values if the values
obtained from PPLib are bogus.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
moving hubbub functions to new file
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abandon new_crtcs array and use for_each_new iterator to acquire new
crtcs.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For better readability.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GTT manager handles the GART address space anyway, so it is
completely pointless to keep the same information around twice.
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename amdgpu_gtt_mgr_is_allocated() to amdgpu_gtt_mgr_has_gart_addr() and use
that instead.
v2: rename the function as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SR-IOV when doing gpu reset this routine shouldn't do
resource allocating otherwise memory leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,no sriov check since gpu recover is unified
2,need CPU_ACCESS_REQUIRED flag for VRAM if SRIOV
because otherwise after following PIN the first allocated
VRAM bo is wasted due to some TTM mgr reason.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since now gpu reset is unified with gpu_recover
for both bare-metal and SR-IOV:
1)rename in_sriov_reset to in_gpu_reset
2)move lock_reset from adev->virt to adev
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,new imple names amdgpu_gpu_recover which gives more hint
on what it does compared with gpu_reset
2,gpu_recover unify bare-metal and SR-IOV, only the asic reset
part is implemented differently
3,gpu_recover will increase hang job karma and mark its entity/context
as guilty if exceeds limit
V2:
4,in scheduler main routine the job from guilty context will be immedialy
fake signaled after it poped from queue and its fence be set with
"-ECANCELED" error
5,in scheduler recovery routine all jobs from the guilty entity would be
dropped
6,in run_job() routine the real IB submission would be skipped if @skip parameter
equales true or there was VRAM lost occured.
V3:
7,replace deprecated gpu reset, use new gpu recover
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jobs are skipped under two cases
1)when the entity behind this job marked guilty, the job
poped from this entity's queue will be dropped in sched_main loop.
2)in job_recovery(), skip the scheduling job if its karma detected
above limit, and also skipped as well for other jobs sharing the
same fence context. this approach is becuase job_recovery() cannot
access job->entity due to entity may already dead.
v2:
some logic fix
v3:
when entity detected guilty, don't drop the job in the poping
stage, instead set its fence error as -ECANCELED
in run_job(), skip the scheduling either:1) fence->error < 0
or 2) there was a VRAM LOST occurred on this job.
this way we can unify the job skipping logic.
with this feature we can introduce new gpu recover feature.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That was somehow completely of.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a follow-up patch to:
Leo (Sunpeng) Li Cleanup code that enables freesync
We should only add a stream to freesync if a modeset was requested, so
we don't fill the core freesync map with pointless streams.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a follow-up patch to:
Bhawanpreet Lakha Atomic freesync ASSERT fix
Changes:
- Combine to use one iterator
- Use new DRM iterators.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes to atomic set property for freesync.
Now In set property, just set the freesync variables and return 0.
Based on the variables call mod_freesync_set_user_enable() inside
commit_tail
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't currently expose variable refresh rate, but add the state to the
connector state to make it easier to maintain the support for it from a
hw support perspective while we figure out the uapi for drm.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the programming sequence to allow DMCU firmware to be loaded by
PSP. This code detects whether the firmware is loaded and does a check
to verify the expected interface version and checks for correct response
from micro controller.
Added registry key method to allow force loading of firmware from kernel
mode driver for test purposes. This is old method of firmware loading
without PSP.
Moved some init sequences into dc/dmcu.
Changed loading sequence to initialize IRAM after firmware completely
loaded. Firmware will now disable features that use IRAM
until initialized.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of pipe split, cursor position should also be
programmed as per cursor address.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
C++ compilers don't like the implicit conversion
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
removing duplicate functions, renaming struct mi_regs, etc.
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove defines we no longer need
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Registers added to definition list that are required
for multi display synchronization
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program cursor attributes during set mode is only needed
in case of pipe slipt, bottom pipe should be programmed
same as top pipe. Need to program if address is 0.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Moved lock and unlock to apply_ctx_to_surface, since all
the front end programming is within apply_ctx_to_surface.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some features should only be enabled on APUs or should not
be enabled on APUs.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the variable ref_clock was assigned same
value twice in same function.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used to set up smu power logging.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used to set up smu power logging.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move powerplay and amdgpu shared structures
and definitions to kgd_pp_interface.h. This
is the interface between the base driver
and powerplay.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the interface.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those functions are exported to DC
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the display/power interfaces to one place.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always use the BO mem now.
v2: minor rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display can't seem to handle this correctly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to test if any domain fits, not all of them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always need to bind pinned BOs, not just when the caller requested the
address.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to specify multiple possible placements again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The exclusive mode has real-time limitation in reality, such like being
done in 300ms. It's easy observed if running many VF/VMs in single host
with heavy CPU workload.
If we find the init fails due to exclusive mode timeout, try it again.
v2:
- rewrite the condition for readable value.
v3:
- fix typo, add comments for sleep
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver can use this interface to check if there's a function level
reset done in hypervisor. It's helpful when IRQ handler for reset
is not ready, or special handling is required.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMIO space can be blocked on virtualised device. Add this
function to check if MMIO is blocked or not.
Todo: need a reliable method such like communation
with hypervisor.
v2:
- add comments inline
Signed-off-by: pding <Pixel.Ding@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Normally all waiting get timeout if there's one.
Release the lock and return immediately when timeout happens.
v2:
- set the se_sh to broadcase before return
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When this VF stays in exclusive mode for long, other VFs will be
impacted.
The redundant messages causes exclusive mode timeout when they're
redirected. That is a normal use case for cloud service to redirect
guest log to virtual serial port.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this query will give flag bits to indicate what happend
on the given context
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
reset_counter marks the reset counter number once the context
is created, shouldn't be changed due to query.
To keep U/K interface on the ctx_query and keep ctx's reset_counter
logic compatible with GPU RESET feature, now use another var named
"reset_counter_query" to replace the original checked & updated in
amdgpu_ctx_query.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bug:
Kfifo is limited at size, during GPU reset it would fill up to limit
and the pushing thread (producer) would wait for the scheduler worker to
consume the items in the fifo while holding reservation lock
on a BO. The gpu reset thread on the other hand blocks the scheduler
during reset. Before it unblocks the sceduler it might want
to recover VRAM and so will try to reserve the same BO the producer
thread is already holding creating a deadlock.
Fix:
Switch from kfifo to SPSC queue which is unlimited in size.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is intended to sabstitute the bounded fifo we are currently
using.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
merge the setting guilty on context into this function
to avoid implement extra routine.
v2:
go through entity list and compare the fence_ctx
before operate on the entity, otherwise the entity
may be just a wild pointer
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this way the real interested guilty is connected to entity->guilty
pointer, and we can use entity->pointer later in gpu recovery procedure
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this member will be used later, it will points to
the real var inside of context and CS_SUBMIT & gpu schdduler
can decide if skip a job depends on context->guilty or *entity->guilty
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since gpu_scheduler source domain cannot access amdgpu variable
so need create the hang_limit membewr for sched, and it can
refer it for the upcoming GPU RESET patches
v2:
make hang_limit a parameter of sched_init()
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cleanups, now only operate on the given ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bug: amdgpu_job_free_cb was accessing s_job->s_entity when the allocated
amdgpu_ctx (and the entity inside it) were already deallocated from
amdgpu_cs_parser_fini.
Fix: Save job's priority on it's creation instead of accessing it from
s_entity later on.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike the KMS API, the hardware doesn't support planes exceeding the
screen boundaries or planes being located fully off-screen. We need to
clip plane coordinates to support the use case.
Fortunately the DRM core offers a drm_atomic_helper_check_plane_state()
helper that validates the scaling factor and clips the plane
coordinates. Use it to implement the plane atomic check and use the
clipped source and destination rectangles from the plane state instead
of the unclipped source and CRTC coordinates to configure the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The plane atomic check implementation is identical on Gen2 (DU planes)
and Gen3 (VSP planes), but two separate functions exist as they operate
on different data structures. Refactor the code to share the
implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
An early implementation of suspend-resume helpers are available in the
CRTC module, however they are unused and no longer needed.
With suspend and resume handled by the core DRM atomic helpers, we can
remove the unused functions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To support system suspend operations we must ensure the hardware is
stopped, and resumed explicitly from the suspend and resume handlers.
Implement suspend and resume functions using the DRM atomic helper
functions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Since commit 4a97a3da42 ("drm: Don't update property values for atomic
drivers") atomic drivers must not update property values as properties
are read from the state instead. To catch remaining users, the
drm_object_property_set_value() function now throws a warning when
called by atomic drivers on non-immutable properties, and we hit that
warning when creating connectors.
The easy fix is to just remove the drm_object_property_set_value() as it
is used here to set the initial value of the connector's DPMS property
to OFF. The DPMS property applies on top of the connector's state crtc
pointer (initialized to NULL) that is the main connector on/off control,
and should thus default to ON.
Fixes: 4a97a3da42 ("drm: Don't update property values for atomic drivers")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the R8A7745 DU (which is very similar to the R8A7794 DU);
it has 2 RGB outputs.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
