Commit Graph

6921 Commits

Author SHA1 Message Date
Nikolay Borisov
5ead2dd02c btrfs: Drop fs_info parameter from btrfs_finish_extent_commit
It's provided by the transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:41:11 +02:00
Nikolay Borisov
460fb20a4b btrfs: Drop fs_info parameter from btrfs_qgroup_account_extents
It's provided by the transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:41:10 +02:00
Nikolay Borisov
c79a70b133 btrfs: drop fs_info parameter from btrfs_run_delayed_refs
It's provided by the transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:41:10 +02:00
Nikolay Borisov
39d7d09dc2 btrfs: Remove unused flush var in shrink_delalloc
Added by 08e007d2e5 ("Btrfs: improve the noflush reservation") and
made redundant by 17024ad0a0 ("Btrfs: fix early ENOSPC due to
delalloc").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:41:10 +02:00
Nikolay Borisov
101d2dc0b2 btrfs: Remove unused extent_root var from caching_thread
Added by b4570aa994 ("btrfs: fix compiling with CONFIG_BTRFS_DEBUG
enabled.") and obsoleted by 2ff7e61e0d ("btrfs: take an fs_info
directly when the root is not used otherwise").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:41:10 +02:00
Nikolay Borisov
338dae1ae6 btrfs: remove max_active var from open_ctree
Introduced by 5cdc7ad337 ("btrfs: Replace fs_info->workers with
btrfs_workqueue.") but obsoleted by 2a4581983f ("btrfs: factor
btrfs_init_workqueues() out of open_ctree()").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:57 +02:00
Nikolay Borisov
8535dc1967 btrfs: Remove unused root var from relink_file_extents
Added in 38c227d87c ("Btrfs: snapshot-aware defrag") but subsequently
made redundant by 0b246afa62 ("btrfs: root->fs_info cleanup, add
fs_info convenience variables").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:57 +02:00
Nikolay Borisov
4eeb97c67a btrfs: Remove unused tot_len var from lzo_decompress
Added already unused in a6fa6fae40 ("btrfs: Add lzo compression
support").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:57 +02:00
Nikolay Borisov
d6e823a578 btrfs: Remove unused length var from scrub_handle_errored_block
Added in b5d67f64f9 ("Btrfs: change scrub to support big blocks") but
rendered redundant by be50a8ddaa ("Btrfs: Simplify
scrub_setup_recheck_block()'s argument").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:57 +02:00
Nikolay Borisov
a6dbceafb9 btrfs: Remove unused op_key var from add_delayed_refs
Added as part of 86d5f99442 ("btrfs: convert prelimary reference
tracking to use rbtrees") but never used. tmp_op_key essentially
subsumed that variable.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:57 +02:00
Qu Wenruo
ba89b80268 btrfs: volumes: Remove the meaningless condition of minimal nr_devs when allocating a chunk
When checking the minimal nr_devs, there is one dead and meaningless
condition:

if (ndevs < devs_increment * sub_stripes || ndevs < devs_min) {
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This condition is meaningless, @devs_increment has nothing to do with
@sub_stripes.

In fact, in btrfs_raid_array[], profile with sub_stripes larger than 1
(RAID10) already has the @devs_increment set to 2.
So no need to multiple it by @sub_stripes.

And above condition is also dead.
For RAID10, @devs_increment * @sub_stripes equals 4, which is also the
@devs_min of RAID10.
For other profiles, @sub_stripes is always 1, and since @ndevs is
rounded down to @devs_increment, the condition will always be true.

Remove the meaningless condition to make later reader wander less.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:56 +02:00
Nikolay Borisov
6f47c706d9 btrfs: Document parameters of btrfs_reserve_extent
This function is the entry to the extent allocator and as such has
quite a number of parameters. Some of those have subtle effects on the
allocation algorithm. Document the parameters.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:56 +02:00
Nikolay Borisov
d87ff75863 btrfs: Handle error from btrfs_uuid_tree_rem call in _btrfs_ioctl_set_received_subvol
As with every function which deals with modifying the btree
btrfs_uuid_tree_rem can fail for any number of reasons (ie. EIO/ENOMEM).
Handle return error value from this function gracefully by aborting the
transaction.

Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:56 +02:00
Nikolay Borisov
776c4a7ce8 btrfs: Use sizeof directly instead of a constant variable
The kernel would like to have all stack VLA usage removed[1].
Unfortunately using an integer constant variable as the size of an
array is still considered a VLA. Instead let's use directly sizeof(var)
which removes the VLA usage. Use the occasion to remove csum_size
altogether and use sizeof() also for the size passed to memcmp

[1]: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:56 +02:00
David Sterba
d0ee393493 btrfs: rename submit callbacks and drop double underscores
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:56 +02:00
David Sterba
6c55343587 btrfs: remove unused parameters from extent_submit_bio_done_t
Remove parameters not used by any of the callbacks.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:55 +02:00
David Sterba
d0779291b1 btrfs: remove unused parameters from extent_submit_bio_start_t
Remove parameters not used by any of the callbacks.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:55 +02:00
David Sterba
a758781d4b btrfs: separate types for submit_bio_start and submit_bio_done
The callbacks make use of different parameters that are passed to the
other type unnecessarily. This patch adds separate types for each and
the unused parameters will be removed.

The type extent_submit_bio_hook_t keeps all parameters and can be used
where the start/done types are not appropriate.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:55 +02:00
David Sterba
d9d19a010b btrfs: kill tree_mod_log_set_root_pointer helper
A useless wrapper around tree_mod_log_insert_root that hides missing
error handling. Move it to the callers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:55 +02:00
David Sterba
0e82bcfe3c btrfs: kill tree_mod_log_set_node_key helper
A trivial wrapper that can be simply opencoded and makes the GFP
allocation request more visible. The error handling is now moved to the
callers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:55 +02:00
David Sterba
bf1d342510 btrfs: kill trivial wrapper tree_mod_log_eb_move
The wrapper is effectively an alias for tree_mod_log_insert_move but
also hides the missing error handling. To make that more visible, lift
the BUG_ON to the callers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:55 +02:00
David Sterba
b1a09f1ec5 btrfs: remove trivial locking wrappers of tree mod log
The wrappers are trivial and do not bring any extra value on top of the
plain locking primitives.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:54 +02:00
David Sterba
bcd24dabe0 btrfs: drop fs_info parameter from __tree_mod_log_oldest_root
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:54 +02:00
David Sterba
b6dfa35bd5 btrfs: embed tree_mod_move structure to tree_mod_elem
The tree_mod_move is not used anywhere and can be embedded as anonymous
structure.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:54 +02:00
David Sterba
a446a979ff btrfs: drop unused fs_info parameter from tree_mod_log_eb_move
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:54 +02:00
David Sterba
95b757c164 btrfs: drop fs_info parameter from tree_mod_log_free_eb
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:54 +02:00
David Sterba
db7279a20b btrfs: drop fs_info parameter from tree_mod_log_free_eb
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
e09c2efe7e btrfs: drop fs_info parameter from tree_mod_log_insert_key
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
6074d45f60 btrfs: drop fs_info parameter from tree_mod_log_insert_move
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
3ac6de1abd btrfs: drop fs_info parameter from tree_mod_log_set_node_key
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
b8b3d625ce btrfs: document more parameters of submit_extent_page
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
0c8508a6e7 btrfs: cleanup merging conditions in submit_extent_page
The merge call was factored out to a separate helper but it's a trivial
one and arguably we can opencode it and cache the value.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
8eec8296a0 btrfs: remove redundant variable in __do_readpage
The value of page_end is only stored to end, no other use.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
David Sterba
5c2b1fd753 btrfs: assume that bio_ret is always valid in submit_extent_page
All callers pass a valid pointer so we can drop the redundant checks.
The call to submit_one_bio never happend and can be removed.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
Liu Bo
6ca1765b36 Btrfs: scrub: batch rebuild for raid56
In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K)
as unit, however, scrub_extent() sets blocksize as unit, so rebuild
process may be triggered on every block on a same stripe.

A typical example would be that when we're replacing a disappeared disk,
all reads on the disks get -EIO, every block (size is 4K if blocksize is
4K) would go thru these,

scrub_handle_errored_block
  scrub_recheck_block # re-read pages one by one
  scrub_recheck_block # rebuild by calling raid56_parity_recover()
                        page by page

Although with raid56 stripe cache most of reads during rebuild can be
avoided, the parity recover calculation(xor or raid6 algorithms) needs to
be done $(BTRFS_STRIPE_LEN / blocksize) times.

This makes it smarter by doing raid56 scrub/replace on stripe length.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
David Sterba
416a72022e btrfs: sort and group mount option definitions
Sort mount options by the primary name, followed by the 'no-'
counterpart if it exists. Group the deprecated and debugging options.
Enum and token defintions are synced.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
Howard McLauchlan
62b8e07731 btrfs: Add nossd_spread mount option
Btrfs has two mount options for SSD optimizations: ssd and ssd_spread.
Presently there is an option to disable all SSD optimizations, but there
isn't an option to disable just ssd_spread.

This patch adds a mount option nossd_spread that disables ssd_spread
only.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
Nikolay Borisov
92e2f7e370 btrfs: Remove btrfs_fs_info::open_ioctl_trans
Since userspace transaction have been removed we no longer have use
for this field so delete it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
bcf3a3e7fb btrfs: Remove code referencing unused TRANS_USERSPACE
Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
859e682d58 btrfs: Remove btrfs_file_private::trans
Now that the userspace transaction IOCTL have been removed, this member
is no longer used so just remove it

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
7a5a07a810 btrfs: Remove userspace transaction ioctls
Commit 3558d4f88e ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Sage Weil <sage@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Qu Wenruo
4d31778aa2 btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled
When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).

This can be triggered by fstests btrfs/152.

The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.

Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.

Reported-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
2e32ef87b0 btrfs: Relax memory barrier in btrfs_tree_unlock
When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.

The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Anand Jain
7c829b722d btrfs: add define for oldest generation
Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:50 +02:00
David Sterba
051c98eb11 btrfs: open code trivial helper btrfs_page_exists_in_range
The called function name is self explanatory.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:50 +02:00
Matthew Wilcox
965aab1cfc btrfs: Use filemap_range_has_page()
The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache.  The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.

eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:45 +02:00
Liu Bo
4759700a71 Btrfs: dev-replace: make sure target is identical to source when raid56 rebuild fails
In the last step of scrub_handle_error_block, we try to combine good
copies on all possible mirrors, this works fine for raid1 and raid10,
but not for raid56 as it's doing parity rebuild.

If parity rebuild doesn't get back with correct data which matches its
checksum, in case of replace we'd rather write what is stored in the
source device than the data calculuated from parity.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:43 +02:00
Liu Bo
d6a691350b Btrfs: raid56: remove redundant async_missing_raid56
async_missing_raid56() is identical to async_read_rebuild().

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:43 +02:00
Su Yue
005d67127f btrfs: adjust return values of btrfs_inode_by_name
Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.

Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found.  Removal of label out_err also simplifies the
function.

Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:43 +02:00
Anand Jain
9b99b11564 btrfs: rename btrfs_close_extra_device to btrfs_free_extra_devids
This function btrfs_close_extra_devices() is about freeing
extra devids which once it may have belonged to this filesystem.
So rename it and add the comment. The _devid suffix is
appropriate as this function won't handle devices which are
outside of the filesytem being mounted.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:42 +02:00
Nikolay Borisov
d02c0e2019 btrfs: Remove root argument from cow_file_range_inline
This argument is always set to the root of the inode, which is also
passed. So let's get a reference inside the function and simplify
the arg list.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:42 +02:00
Liu Bo
895a72be41 Btrfs: send: fix typo in TLV_PUT
According to tlv_put()'s prototype, data and attrlen needs to be
exchanged in the macro, but seems all callers are already aware of
this misorder and are therefore not affected.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:42 +02:00
Nikolay Borisov
e5b84f7a25 btrfs: Remove root argument from btrfs_log_dentry_safe
Now that nothing uses the root arg of btrfs_log_dentry_safe it can be
safely removed. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:42 +02:00
Nikolay Borisov
f882274b2d btrfs: Remove root arg from btrfs_log_inode_parent
btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:42 +02:00
Nikolay Borisov
448f3a17ac btrfs: Remove redundant comment from btrfs_search_forward
This function always sets keep_locks to 1 and saves the old value of
keep_locks which is restored at the end. So there is no way it can be
called without keep_locks being set. Remove comment imposing redundant
requirement on callers.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:41 +02:00
David Sterba
738c93d42c btrfs: move btrfs_listxattr prototype to xattr.h
There's a proper header for xattr handlers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:41 +02:00
David Sterba
bcadd7050a btrfs: adjust return type of btrfs_getxattr
The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:41 +02:00
David Sterba
ab0d093616 btrfs: drop extern from function declarations
Extern for functions does not make any difference, there are only a few
so let's remove them before it's too late.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:41 +02:00
David Sterba
7852781d94 btrfs: drop underscores from exported xattr functions
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:41 +02:00
Filipe Manana
ffa7c4296e Btrfs: send, do not issue unnecessary truncate operations
When send finishes processing an inode representing a regular file, it
always issues a truncate operation for that file, even if its size did
not change or the last write sets the file size correctly. In the most
common cases, the issued write operations set the file to correct size
(either full or incremental sends) or the file size did not change (for
incremental sends), so the only case where a truncate operation is needed
is when a file size becomes smaller in the send snapshot when compared
to the parent snapshot.

By not issuing unnecessary truncate operations we reduce the stream size
and save time in the receiver. Currently truncating a file to the same
size triggers writeback of its last page (if it's dirty) and waits for it
to complete (only if the file size is not aligned with the filesystem's
sector size). This is being fixed by another patch and is independent of
this change (that patch's title is "Btrfs: skip writeback of last page
when truncating file to same size").

The following script was used to measure time spent by a receiver without
this change applied, with this change applied, and without this change and
with the truncate fix applied (the fix to not make it start and wait for
writeback to complete).

  $ cat test_send.sh
  #!/bin/bash

  SRC_DEV=/dev/sdc
  DST_DEV=/dev/sdd
  SRC_MNT=/mnt/sdc
  DST_MNT=/mnt/sdd

  mkfs.btrfs -f $SRC_DEV >/dev/null
  mkfs.btrfs -f $DST_DEV >/dev/null
  mount $SRC_DEV $SRC_MNT
  mount $DST_DEV $DST_MNT

  echo "Creating source filesystem"
  for ((t = 0; t < 10; t++)); do
      (
          for ((i = 1; i <= 20000; i++)); do
              xfs_io -f -c "pwrite -S 0xab 0 5000" \
                  $SRC_MNT/file_$i > /dev/null
          done
      ) &
     worker_pids[$t]=$!
  done
  wait ${worker_pids[@]}

  echo "Creating and sending snapshot"
  btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
  /usr/bin/time -f "send took %e seconds"    \
         btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
  /usr/bin/time -f "receive took %e seconds" \
         btrfs receive -f $SRC_MNT/send_file $DST_MNT

  umount $SRC_MNT
  umount $DST_MNT

The results, which are averages for 5 runs for each case, were the
following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* Without this change and with the truncate fix

average receive time was 12.51 seconds
standard deviation of 0.32 seconds

* With this change and without the truncate fix

average receive time was 10.02 seconds
standard deviation of 1.11 seconds

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:41 +02:00
Filipe Manana
213e8c5520 Btrfs: skip writeback of last page when truncating file to same size
When we truncate a file to the same size and that size is not aligned
with the sector size, we end up triggering writeback (and wait for it to
complete) of the last page. This is unncessary as we can not have delayed
allocation beyond the inode's i_size and the goal of truncating a file
to its own size is to discard prealloc extents (allocated via the
fallocate(2) system call). Besides the unnecessary IO start and wait, it
also breaks the oppurtunity for larger contiguous extents on disk, as
before the last dirty page there might be other dirty pages.

This scenario is probably not very common in general, however it is
common for btrfs receive implementations because currently the send
stream always issues a truncate operation for each processed inode as
the last operation for that inode (this truncate operation is not
always needed and the send implementation will be addressed to avoid
them).

So improve this by not starting and waiting for writeback of the inode's
last page when we are truncating to exactly the same size.

The following script was used to quickly measure the time a receive
operation takes:

 $ cat test_send.sh
 #!/bin/bash

 SRC_DEV=/dev/sdc
 DST_DEV=/dev/sdd
 SRC_MNT=/mnt/sdc
 DST_MNT=/mnt/sdd

 mkfs.btrfs -f $SRC_DEV >/dev/null
 mkfs.btrfs -f $DST_DEV >/dev/null
 mount $SRC_DEV $SRC_MNT
 mount $DST_DEV $DST_MNT

 echo "Creating source filesystem"
 for ((t = 0; t < 10; t++)); do
     (
         for ((i = 1; i <= 20000; i++)); do
             xfs_io -f -c "pwrite -S 0xab 0 5000" \
                $SRC_MNT/file_$i > /dev/null
         done
     ) &
     worker_pids[$t]=$!
 done
 wait ${worker_pids[@]}

 echo "Creating and sending snapshot"
 btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
 /usr/bin/time -f "send took %e seconds"    \
     btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
 /usr/bin/time -f "receive took %e seconds" \
     btrfs receive -f $SRC_MNT/send_file $DST_MNT

 umount $SRC_MNT
 umount $DST_MNT

The results for 5 runs were the following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* With this change

average receive time was 12.51 seconds
standard deviation of 0.32 seconds

Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:40 +02:00
Liu Bo
ed5d5f37e6 Btrfs: dev-replace: skip prealloc extents when copy nocow pages
It doens't make sense to process prealloc extents as pages will be
filled with zero when reading prealloc extents.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:40 +02:00
Anand Jain
d612ac59ef btrfs: unify types for metadata_ratio and data_chunk_allocations
We have btrfs_fs_info::data_chunk_allocations and
btrfs_fs_info::metadata_ratio declared as unsigned which would be
unsinged int and kernel style prefers unsigned int over bare unsigned.
So this patch changes them to u32.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:40 +02:00
Nikolay Borisov
de224b7c56 btrfs: Remove redundant memory barriers around dio_private error status
Using any kind of memory barriers around atomic operations which have
a return value is redundant, since those operations themselves are
fully ordered. atomic_t.txt states:

    - RMW operations that have a return value are fully ordered;

    Fully ordered primitives are ordered against everything prior and
    everything subsequent. Therefore a fully ordered primitive is like
    having an smp_mb() before and an smp_mb() after the primitive.

Given this let's replace the extra memory barriers with comments.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:40 +02:00
Anand Jain
16db5758fe btrfs: remove assert in btrfs_init_dev_replace_tgtdev()
In the same function we just ran btrfs_alloc_device() which means the
btrfs_device::resized_list is sure to be empty and we are protected
with the btrfs_fs_info::volume_mutex.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:40 +02:00
David Sterba
e67c718b5b btrfs: add more __cold annotations
The __cold functions are placed to a special section, as they're
expected to be called rarely. This could help i-cache prefetches or help
compiler to decide which branches are more/less likely to be taken
without any other annotations needed.

Though we can't add more __exit annotations, it's still possible to add
__cold (that's also added with __exit). That way the following function
categories are tagged:

- printf wrappers, error messages
- exit helpers

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:39 +02:00
David Sterba
ffc5a3794f btrfs: add (the only possible) __exit annotation
Recently, the __init annotations have been added. There's unfortunatelly
only one case where we can add __exit, because most of the cleanup
helpers are also called from the __init phase.

As the __exit annotated functions get discarded completely for a
built-in code, we'd miss them from the init phase.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:39 +02:00
Anand Jain
ccb0e7d1c1 btrfs: verify subvolid mount parameter
We aren't verifying the parameter passed to the subvolid mount option,
so we won't report and fail the mount if a junk value is specified for
example, -o subvolid=abc.
This patch verifies the subvolid option with match_u64.

Up to now the memparse function accepts the K/M/G/ suffixes, that are
usually meant for size values and do not make sense for a subvolume it.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:39 +02:00
Liu Bo
5811375325 Btrfs: fix unexpected cow in run_delalloc_nocow
Fstests generic/475 provides a way to fail metadata reads while
checking if checksum exists for the inode inside run_delalloc_nocow(),
and csum_exist_in_range() interprets error (-EIO) as inode having
checksum and makes its caller enter the cow path.

In case of free space inode, this ends up with a warning in
cow_file_range().

The same problem applies to btrfs_cross_ref_exist() since it may also
read metadata in between.

With this, run_delalloc_nocow() bails out when errors occur at the two
places.

cc: <stable@vger.kernel.org> v2.6.28+
Fixes: 17d217fe97 ("Btrfs: fix nodatasum handling in balancing code")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:39 +02:00
Nikolay Borisov
9678c54388 btrfs: Remove custom crc32c init code
The custom crc32 init code was introduced in
14a958e678 ("Btrfs: fix btrfs boot when compiled as built-in") to
enable using btrfs as a built-in. However, later as pointed out by
60efa5eb2e ("Btrfs: use late_initcall instead of module_init") this
wasn't enough and finally btrfs was switched to late_initcall which
comes after the generic crc32c implementation is initiliased. The
latter commit superseeded the former. Now that we don't have to
maintain our own code let's just remove it and switch to using the
generic implementation.

Despite touching a lot of files the patch is really simple. Here is the gist of
the changes:

1. Select LIBCRC32C rather than the low-level modules.
2. s/btrfs_crc32c/crc32c/g
3. replace hash.h with linux/crc32c.h
4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly.

I've tested this with btrfs being both a module and a built-in and xfstest
doesn't complain.

Does seem to fix the longstanding problem of not automatically selectiong
the crc32c module when btrfs is used. Possibly there is a workaround in
dracut.

The modinfo confirms that now all the module dependencies are there:

before:
depends:        zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate

after:
depends:        libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add more info to changelog from mails ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:39 +02:00
Qu Wenruo
3e72ee8874 btrfs: Refactor __get_raid_index() to btrfs_bg_flags_to_raid_index()
Function __get_raid_index() is used to convert block group flags into
raid index, which can be used to get various info directly from
btrfs_raid_array[].

Refactor this function a little:

1) Rename to btrfs_bg_flags_to_raid_index()
   Double underline prefix is normally for internal functions, while the
   function is used by both extent-tree and volumes.

   Although the name is a little longer, but it should explain its usage
   quite well.

2) Move it to volumes.h and make it static inline
   Just several if-else branches, really no need to define it as a normal
   function.

   This also makes later code re-use between kernel and btrfs-progs
   easier.

3) Remove function get_block_group_index()
   Really no need to do such a simple thing as an exported function.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:38 +02:00
Qu Wenruo
2f659546c9 btrfs: tree-checker: Replace root parameter with fs_info
When inspecting the error message with real corruption, the "root=%llu"
always shows "1" (root tree), instead of the correct owner.

The problem is that we are getting @root from page->mapping->host, which
points the same btree inode, so we will always get the same root.

This makes the root owner output meaningless, and harder to port
tree-checker to btrfs-progs.

So get rid of the false and meaningless @root parameter and replace it
with @fs_info.
To get the owner, we can only rely on btrfs_header_owner() now.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:38 +02:00
Liu Bo
393da91819 Btrfs: add tracepoint for em's EEXIST case
This is adding a tracepoint 'btrfs_handle_em_exist' to help debug the
subtle bugs around merge_extent_mapping.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:38 +02:00
Nikolay Borisov
5d23515be6 btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable
Currently btrfs_run_qgroups is doing a bit too much. Not only is it
responsible for synchronizing in-memory state of qgroups to disk but
it also contains code to trigger the initial qgroup rescan when
quota is enabled initially. This condition is detected by checking that
BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set.
Nothing really requires from the code to be structured (and scattered)
the way it is so let's streamline things. First move the quota rescan
code into btrfs_quota_enable, where its invocation is closer to the
use. This also makes the FS_QUOTA_ENABLING flag redundant so let's
remove it as well.

This has been tested with a full xfstest run with qgroups enabled on
the scratch device of every xfstest and no regressions were observed.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:38 +02:00
Gu JinXiang
7ce311d552 btrfs: use reada direction enum instead of constant value in load_free_space_tree
load_free_space_tree calls either function load_free_space_bitmaps or
load_free_space_extents. And either of those two will lead to call
btrfs_next_item.  So in function load_free_space_tree, use READA_FORWARD
to read forward ahead.

This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.

Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:37 +02:00
Gu Jinxiang
019599ada7 btrfs: use reada direction enum instead of constant value in populate_free_space_tree
populate_free_space_tree calls function btrfs_search_slot_for_read with
parameter int find_higher = 1, it means that, if no exact match is
found, then use the next higher item.  So in function
populate_free_space_tree, use READA_FORWARD to read forward ahead.

This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.

Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:37 +02:00
Nikolay Borisov
c1c3fac2a9 btrfs: Remove btrfs_inode::delayed_iput_count
delayed_iput_count wa supposed to be used to implement, well, delayed
iput. The idea is that we keep accumulating the number of iputs we do
until eventually the inode is deleted. Turns out we never really
switched the delayed_iput_count from 0 to 1, hence all conditional
code relying on the value of that member being different than 0 was
never executed. This, as it turns out, didn't cause any problem due
to the simple fact that the generic inode's i_count member was always
used to count the number of iputs. So let's just remove the unused
member and all unused code. This patch essentially provides no
functional changes. While at it, also add proper documentation for
btrfs_add_delayed_iput

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:37 +02:00
Qu Wenruo
793ff2c88c btrfs: volumes: Cleanup stripe size calculation
Cleanup the following things:
1) open coded SZ_16M round up
2) use min() to replace open-coded size comparison
3) code style

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:37 +02:00
Nikolay Borisov
da07d4ab33 btrfs: Streamline btrfs_delalloc_reserve_metadata initial operations
The behavior of btrfs_delalloc_reserve_metadata depends on whether
the inode we are allocating for is the freespace inode or not. As it
stands if we are the free node we set 'flush' and 'delalloc_lock'
variable to certain values. Subsequently we check the values of those
vars and act accordingly. Instead, simplify things by having 1 if
which checks whether we are the freespace inode or not and do any
specific operation in either branches of that if. This makes the code
a bit easier to understand, as an added bonus it also shrinks the
compiled size:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-17 (-17)
Function                                     old     new   delta
btrfs_delalloc_reserve_metadata             1876    1859     -17
Total: Before=85966, After=85949, chg -0.02%

No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:37 +02:00
Anand Jain
b1b8e38622 btrfs: insert newly opened device to the end of the list
Add opened device to the tail of dev_alloc_list instead of head, so that
it maintains the same order as dev_list.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:37 +02:00
Anand Jain
f8e10cd3f8 btrfs: keep device list sorted
By maintaining the device list sorted lets us reproduce the problems
related to missing chunk in the degraded mode much more consistent. So
fix this by sorting the devices by devid within the kernel. So that we
know which device is assigned to the struct fs_info::latest_bdev when
all the devices are having and same SB generation.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:36 +02:00
Liu Bo
3d5addafd0 Btrfs: do not check inode's runtime flags under root->orphan_lock
It's not necessary to hold ->orphan_lock when checking inode's runtime
flags.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:36 +02:00
Nikolay Borisov
bc5511d0ed btrfs: Use schedule_timeout_interruptible
Instead of manually fiddling with the state of the task
(RUNNING->INTERRUPTIBLE->RUNNING) again just use schedule_timeout_interruptible
which adjusts the task state as needed. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:36 +02:00
Nikolay Borisov
f9cacae314 btrfs: Move error handling of btrfs_start_dirty_block_groups closer to call site
Even though btrfs_start_dirty_block_groups is fairly in the beginning of
btrfs_commit_transaction outside of the critical section defined by the
transaction states it can only be run by a single comitter. In other
words it defines its own critical section thanks to the
BTRFS_TRANS_DIRTY_BG run flag and ro_block_group_mutex. However, its
error handling is outside of this critical section which is a bit
counter-intuitive. So move the error handling righ after the function is
executed and let the sole runner of dirty block groups handle the return
value. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:36 +02:00
Anand Jain
7ef2d6a722 btrfs: not a disk error if the bio_add_page fails
bio_add_page() can fail for logical reasons as from the bio_add_page()
comments:

/*
 * This will only fail if either bio->bi_vcnt == bio->bi_max_vecs or
 * it's a cloned bio.
 */

Here we have just allocated the bio, so both of those failures can't
occur. So drop the check. We can also drop the error stats for write
error.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:36 +02:00
Qu Wenruo
4117f207d4 btrfs: Add chunk allocation ENOSPC debug message for enospc_debug mount option
Enospc_debug makes extent allocator print more debug messages,
however for chunk allocation, there is no debug message for enospc_debug
at all.

This patch will add message for the following parts of chunk allocator:

1) No rw device at all
   Quite rare, but at least output one message for this case.

2) Not enough space for some device
   This debug message is quite handy for unbalanced disks with stripe
   based profiles (RAID0/10/5/6).

3) Not enough free devices
   This debug message should tell us if current chunk allocator is
   working correctly under minimal device requirements.

Although in most cases, we will hit other ENOSPC before we even hit a
chunk allocator ENOSPC, but such debug info won't help.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:35 +02:00
Anand Jain
566b1760b4 btrfs: use ASSERT to report logical error in cow_file_range()
Use ASSERT to report logical error in cow_file_range(), also move it a
bit closer to when the num_bytes is derived.

The extent start could be (u64)-1 in some cases, the assert should catch
that we do not accidentally pass it to cow_file_range.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:35 +02:00
Anand Jain
3752d22fce btrfs: cow_file_range() num_bytes and disk_num_bytes are same
This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:35 +02:00
Anand Jain
2afb9653bf btrfs: remove unused function btrfs_async_submit_limit()
Commit [1] removed the need to use btrfs_async_submit_limit(), so
delete it.

[1]
 commit 736cd52e0c
  Btrfs: remove nr_async_submits and async_submit_draining

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:35 +02:00
Yang Shi
86d750a48a btrfs: remove unused hardirq.h
Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by btrfs at all.

So, remove the unused hardirq.h.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:35 +02:00
Nikolay Borisov
9a3daff320 btrfs: Add enospc_debug printing in metadata_reserve_bytes
Currently when enospc_debug mount option is turned on we do not print
any debug info in case metadata reservation failures happen. Fix this
by adding the necessary hook in reserve_metadata_bytes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:35 +02:00
Nikolay Borisov
45ae2c1841 btrfs: Document consistency of transaction->io_bgs list
The reason why io_bgs can be modified without holding any lock is
non-obvious. Document it and reference that documentation from the
respective call sites.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:34 +02:00
Nikolay Borisov
bf6d7d4900 btrfs: Remove invalid null checks from btrfs_cleanup_dirty_bgs
list_first_entry is essentially a wrapper over cotnainer_of. The latter
can never return null even if it's working on inconsistent list since it
will either crash or return some offset in the wrong struct.
Additionally, for the dirty_bgs list the iteration is done under
dirty_bgs_lock which ensures consistency of the list.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:34 +02:00
Anand Jain
8f2ceaa7b4 btrfs: log, when replace, is canceled by the user
For debugging or administration purposes, we would want to know if and
when the user cancels the replace, to complement the existing messages
when dev-replace starts or finishes.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog, fold fix for RCU warning from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:34 +02:00
Anand Jain
acf18c56fd btrfs: fix null pointer deref when target device is missing
The replace target device can be missing when mounted with -o degraded,
but we wont allocate a missing btrfs_device to it. So check the device
before accessing.

BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
IP: btrfs_destroy_dev_replace_tgtdev+0x43/0xf0 [btrfs]
Call Trace:
btrfs_dev_replace_cancel+0x15f/0x180 [btrfs]
btrfs_ioctl+0x2216/0x2590 [btrfs]
do_vfs_ioctl+0x625/0x650
SyS_ioctl+0x4e/0x80
do_syscall_64+0x5d/0x160
entry_SYSCALL64_slow_path+0x25/0x25

This patch has been moved in front of patch "btrfs: log, when replace,
is canceled by the user" that could reproduce the crash if the system
reboots inside btrfs_dev_replace_start before the
btrfs_dev_replace_finishing call.

 $ mkfs /dev/sda
 $ mount /dev/sda mnt
 $ btrfs replace start /dev/sda /dev/sdb
 <insert reboot>
 $ mount po degraded /dev/sdb mnt
 <crash>

Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ added reproducer description from mail ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:34 +02:00
Anand Jain
eceff22a80 btrfs: add a comment to mark the deprecated mount option
The options alloc_start and subvolrootid are deprecated, comment them in
the tokens list. And leave them as it is. No functional changes.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:34 +02:00
Anand Jain
d374060864 btrfs: manage commit mount option as %u
As the commit mount option is unsigned so manage it as %u for token
verifications, instead of %d.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:33 +02:00
Anand Jain
02453bdeb0 btrfs: manage check_int_print_mask mount option as %u
As check_int_print_mask mount option is unsigned so manage it as %u for
token verifications, instead of %d.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:33 +02:00
Anand Jain
764cb8b43d btrfs: manage metadata_ratio mount option as %u
As metadata_ratio mount option is unsinged so manage it as %u for token
verifications, instead of %d.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:33 +02:00
Anand Jain
f7b885befd btrfs: manage thread_pool mount option as %u
The mount option thread_pool is always unsigned. Manage it that way all
around.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26 15:09:33 +02:00