Creates a temporary sync object to wait for the BO reservation. This
generalizes amdgpu_vm_wait_pd.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sriov's gpu_recover inside xgpu_ai_mailbox_flr_work would cause duplicate recover in TDR.
TDR's gpu_recover would be triggered by amdgpu_job_timedout,
that could avoid vk-cts failure by unexpected recover.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the callback and call the dispatcher directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bisected guest kernel changes crashing qemu. Landed at
"6c1cd97bda drm/virtio: fix resource id handling". Looked again, and
noticed we where not only leaking *some* ids, but *all* ids. The old
code never ever called virtio_gpu_resource_id_put().
So, commit 6c1cd97bda effectively makes the linux kernel starting
re-using IDs after releasing them, and apparently virglrenderer can't
deal with that. Oops.
This patch puts a temporary stopgap into place for the 5.0 release.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140409.15280-1-kraxel@redhat.com
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcXJw7AAoJEPpiX2QO6xPKWuQH/i3o86TqLheae2vdi8X/yp92
XeZbmNfaL7Gui6ggZpRMREjIIiDZ0nFga5INcVtrak6JRjeefb+wQsy38tdb98ne
EPn6eif0nO/uxc7BsdW2ndIDBSWC+ZW7gt4rzY5zLG/WCmX1qfOOS9GdUpXPF3jY
sB8Af6lsGSxrCFkBzUB9Z7AyoP/Yq+YeamFOtXLufhtQb4GL3djjdugaUBBfQmNn
FvZTxhhsXn3HU9Jy1AjRFALhqXvTjZt1L5myav4sCJ2qlsr2dL9y3c7evbO5jrZY
4TSlKUi5XwfW1RlHTQN43fTq7yWFwoF1FsR4LaKS0a8bKIXiBLwset7YA1m6wmY=
=Woo8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208165000.GA30314@intel.com
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
-----BEGIN PGP SIGNATURE-----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=jS/6
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.1-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.1-rc1
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208144721.25830-1-thierry.reding@gmail.com
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoders on RZ/G1N SoC is similar to RZ/G1M. Add support for
RZ/G1N (R8A7744) SoC to the LVDS encoder driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
dal_gpio_open and dal_gpio_unlock_pin dereference hpd_gpio.
Check for NULL before calling those functions.
Fixes: ac627caf6b ("drm/amd/display: add gpio lock/unlock")
Reported-by: Przemek Socha <soprwa@gmail.com>
CC: Chiawen Huang <chiawen.huang@amd.com>
CC: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The LUTs are single buffered so we should program them after
the double buffered pipe updates have been latched by the
hardware.
We'll also fix up the IPS vs. split gamma w/a to do the IPS
disable like everyone else. Note that this is currently dead
code as we don't use the split gamma mode on HSW, but that
will be fixed up shortly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Split the color management hooks along the single vs. double
buffered registers line. Of the currently programmed registers
GAMMA_MODE and the ilk+ pipe CSC are double buffered, the
LUTS and CHV CGM block are single buffered.
The double buffered register will be programmed during the
normal pipe update with evasion, and also during pipe enable
so that the settings will already be correct when the pipe
starts up before the planes are enabled.
The single buffered registers are currently programmed before
the vblank evade. Which is totally wrong, but we'll correct
that later.
v2: Add some docs to explain the two vfuncs (Matt,Uma)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
For bdw+ let's move the GAMMA_MODE write for the legacy LUT
mode into the .load_luts() funciton directly, rather than
relying on haswell_load_luts(). We'll be getting rid of
haswell_load_luts() entirely soon, and it's anyway cleaner
to have the GAMMA_MODE write in a single place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pass the crtc state etc. as const to the color management commit
functions. And while at it polish some of the local variables.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We shouldn't be computing gamma mode during the commit phase.
Move it to the check phase.
v2: Reword comments a bit (Matt)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On g4x+ the pipe gamma enable bit for the primary plane affects
the pipe bottom color as well. The same for the pipe csc enable
bit on ilk+. Thus we must configure those bits correctly even
when the primary plane is disabled.
To make the feasible let's split those settings from the
plane_ctl() function into a seprate funciton that we can
call from the ->disable_plane() hook as well.
For consistency we'll do that on all the plane types. While
that has no real benefits at this time, it'll become useful
when we start to control the pipe gamma/csc enable bits
dynamically when we overhaul the color management code.
On pre-g4x there doesn't appear to be any way to gamma
correct the pipe bottom color, but sticking to the same
pattern doesn't hurt. And it'll still help us to do
crtc state readout correctly for the pipe gamma enable
bit for the color management overhaul.
An alternative apporach would be to still precompute these
bits into plane_state->ctl, but that would require that we
run through the plane check even when the plane isn't logically
enabled on any crtc. Currently that condition causes us to
short circuit the entire thing and not call ->check_plane().
There would also be some chicken and egg problems with
->check_plane() vs. crtc color state check that would
requite splitting certain things into multiple steps.
So all in all this seems like the easier route.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The exclusive fence is of course perfectly optional here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Fix SMU message format
Send override message after SMU enable features
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new Vega series GPU cards have in-built bridges. To get the pcie
speed and width supported by the platform walk the hierarchy and get the
slowest link.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The crossbar configuration is usually the same across all designs for a
given SoC generation. But sometimes there are designs that require some
other configuration.
Implement support for parsing the crossbar configuration from a device
tree. If the crossbar configuration is not present in the device tree,
fall back to the default crossbar configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The version of VIC found in Tegra186 and later incorporates improvements
with regards to context isolation. As part of those improvements, stream
ID registers were added that allow to specify separate stream IDs for
the Falcon microcontroller and the VIC memory interface.
While it is possible to also set the stream ID dynamically at runtime to
allow userspace contexts to be completely separated, this commit doesn't
implement that yet. Instead, the static VIC stream ID is programmed when
the Falcon is booted. This ensures that memory accesses by the Falcon or
the VIC are properly translated via the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Upon driver failure, the driver core will take care of clearing the
driver data, so there's no need to do so explicitly in the driver.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that cannot be addressed by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device. Note that, technically, the IOVA space needs to be restricted to
the intersection of the DMA masks for all clients that are attached to
the IOMMU domain. In practice using the DMA mask of the host1x device is
sufficient because all host1x clients share the same DMA mask.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move initialization of the shared IOMMU domain after the host1x device
has been initialized. At this point all the Tegra DRM clients have been
attached to the shared IOMMU domain.
This is important because Tegra186 and later use an ARM SMMU, for which
the driver defers setting up the geometry for a domain until a device is
attached to it. This is to ensure that the domain is properly set up for
a specific ARM SMMU instance, which is unknown at allocation time.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Loading the firmware requires an allocation of IOVA space to make sure
that the VIC's Falcon microcontroller can read the firmware if address
translation via the SMMU is enabled.
However, the allocation currently happens at a time where the geometry
of an IOMMU domain may not have been initialized yet. This happens for
example on Tegra186 and later where an ARM SMMU is used. Domains which
are created by the ARM SMMU driver postpone the geometry setup until a
device is attached to the domain. This is because IOMMU domains aren't
attached to a specific IOMMU instance at allocation time and hence the
input address space, which defines the geometry, is not known yet.
Work around this by postponing the firmware load until it is needed at
the time where a channel is opened to the VIC. At this time the shared
IOMMU domain's geometry has been properly initialized.
As a byproduct this allows the Tegra DRM to be created in the absence
of VIC firmware, since the VIC initialization no longer fails if the
firmware can't be found.
Based on an earlier patch by Dmitry Osipenko <digetx@gmail.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tegra DRM clients need access to their parent, so store a pointer to it
upon registration. It's technically possible to get at this by going via
the host1x client's parent and getting the driver data, but that's quite
complicated and not very transparent. It's much more straightforward and
natural to let the children know about their parent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
update_wm_post is meant for pre-g4x only. Don't ever set
it on g4x+.
The only effect of a bogus update_wm_post on g4x+ could
be that we clear the legacy_cursor_update flag in
intel_atomic_commit(). Since legacy_cursor_update is
only set for legacy cursor updates (as the name suggests)
and we only set update_wm_post for a modeset the two
cases should never occur at the same time. But let's
be consistent in setting update_wm_post so we don't
end up confusing so many people.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206185433.8116-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Apply backpressure to hogs that emit requests faster than the GPU can
process them by waiting for their ring to be less than half-full before
proceeding with taking the struct_mutex.
This is a gross hack to apply throttling backpressure, the long term
goal is to remove the struct_mutex contention so that each client
naturally waits, preferably in an asynchronous, nonblocking fashion
(pipelined operations for the win), for their own resources and never
blocks another client within the driver at least. (Realtime priority
goals would extend to ensuring that resource contention favours high
priority clients as well.)
This patch only limits excessive request production and does not attempt
to throttle clients that block waiting for eviction (either global GTT or
system memory) or any other global resources, see above for the long term
goal.
No microbenchmarks are harmed (to the best of my knowledge).
Testcase: igt/gem_exec_schedule/pi-ringfull-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207071829.5574-1-chris@chris-wilson.co.uk
Add err goto label and use it when VMA can't be established or changes
underneath.
v2:
- Dropping Fixes: as it's indeed impossible to race an object to the
error address. (Chris)
v3:
- Use IS_ERR_VALUE (Chris)
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v2
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-2-joonas.lahtinen@linux.intel.com
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.
A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.
v2:
- Refactor the compare function
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
My @samusung.com address is going to cease existing soon, so change it to
an address which can actually be used to contact me.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This commit adds support for s5pv210.
Currently only NV12 and XRGB8888 formats are supported.
It was tested by using tool from
https://www.spinics.net/lists/linux-samsung-soc/msg60498.html
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This hotplug also isn't needed: drm_dp_mst_topology_mgr_set_mst()
already sends a hotplug on its own from drm_dp_destroy_connector_work()
after destroying connectors in the MST topology.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-4-lyude@redhat.com
We have a bad habit of calling drm_fb_helper_hotplug_event() far more
then we actually need to. MST appears to be one of these cases, where we
call drm_fb_helper_hotplug_event() if we fail to resume a connected MST
topology in intel_dp_mst_resume(). We don't actually need to do this at
all though since hotplug events are already sent from
drm_dp_connector_destroy_work() every time connectors are unregistered
from userspace's PoV. Additionally, extra calls to
drm_fb_helper_hotplug_event() also just mean more of a chance of doing a
connector probe somewhere we shouldn't.
So, don't send any hotplug events during resume if the MST topology
fails to come up. Just rely on the DP MST helpers to send them for us.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-3-lyude@redhat.com
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
[Why]
Pipe related init is possible to optimized if we know what we
intend to program, and if we can determine it matches what is
already programmed for the pipe.
[How]
First step is to isolate the pipe related init code
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Keep enable_stream_timing programming only
timing related stuff.
[How]
Move DRR and static screen mask programming from
enable_stream_timing to outside in
apply_single_controller_ctx_to_hw
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we determine the stream we are trying to commit
matches HW, we want to try to optimize.
[How]
Try to acquire the HW resources that are already enabled
and optimize.
Also skip backend reprogramming
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to understand whether link is active aside from stream state.
This could be used to check what links are enabled by GOP.
[How]
Store link_active state in link status and initialize it by checking
if the DIG is enabled.
Keep it updated on every link enable and disable
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More clearly isolate the code that is involved in programming of
vupdate interrupt
[How]
Add function for programming of vupdate interrupt.
Call it after timing is programmed.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to figure out whether a timing we want to commit matches
something that GOP already programmed, in which case
we can decide to some optimizations
[How]
1. Add way to check for DIG FE
2. Add way to check for matching OTG timing
3. Add way to check for matching pixel clock (if possible)
- Currently only support DP for pixel clock, since it is easy to calc
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When moving mouse onto or off of pip plane,
screen would flash briefly due to garbage negative
pos values being programmed for cursor.
Also, text flashes due to PIP flips taking too long.
[How]
When negative pos value seen, default to 0 and adjust by modifying cursor hotspot.
For flip issue, only do post update when optimize required vs all the time.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
