Since support for half-word atomic exchange was not there and Qspinlock
on ARM requires it, modified __xchg() to add support for that as well.
ARMv6 and lower does not support ldrex{b,h} so, added a guard code to
prevent build breaks.
Signed-off-by: Sarbojit Ganguly <ganguly.s@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Rename feat_c3stop to twd_features to match the other variables in this
file. Initialise it with the standard features that we always support,
and arrange to set the CLOCK_EVT_FEAT_C3STOP when appropriate.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In 5388a6b266 ("ARM: SMP: Always enable clock event broadcast support")
Russell noted that "the TWD local timers are unable to wake up the CPU
when it is placed into a low power mode".
However, some platforms do not stop the TWD block in low-power mode,
and can thus use the TWD timer in one-shot mode, without setting up
a broadcast device.
Make the driver check for the "always-on" boolean property, and set
the CLOCK_EVT_FEAT_C3STOP flag accordingly.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When highmem is enabled, there's little reason not to also enable
highpte support as well. Rather than leaving this to chance, make
it an expert option, and default it to be enabled if highmem is
enabled. Add some help text to the option while we're here.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Mimicking the same config option on x86, this allows for 1GB systems to
have their RAM entirely mapped as low memory.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Currently on ARM when <SysRq-L> is triggered from an interrupt handler
(e.g. a SysRq issued using UART or kbd) the main CPU will wedge for ten
seconds with interrupts masked before issuing a backtrace for every CPU
except itself.
The new backtrace code introduced by commit 96f0e00378 ("ARM: add
basic support for on-demand backtrace of other CPUs") does not work
correctly when run from an interrupt handler because IPI_CPU_BACKTRACE
is used to generate the backtrace on all CPUs but cannot preempt the
current calling context.
This can be fixed by detecting that the calling context cannot be
preempted and issuing the backtrace directly in this case. Issuing
directly leaves us without any pt_regs to pass to nmi_cpu_backtrace()
so we also modify the generic code to call dump_stack() when its
argument is NULL.
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dumping registers from other sleeping tasks in KGDB was totally
failing for me. All registers were reported as 0 in many cases.
The code was using task_pt_regs(task) to try to get other thread
registers. This doesn't appear to be the right place to look. From
my tests, I saw non-zero values in this structure when we were looking
at a kernel thread that had a userspace task associated with it, but
it contained the register values from the userspace task. So even in
the cases where registers weren't reported as 0 we were still not
showing the right thing.
Instead of using task_pt_regs(task) let's use task_thread_info(task).
This is the same place that is referred to when doing a dump of all
sleeping task stacks (kdb_show_stack() -> show_stack() ->
dump_backtrace() -> unwind_backtrace() -> thread_saved_sp()).
As further evidence that this is the right thing to do, you can find
the following comment in "gdbstub.c" right before it calls
sleeping_thread_to_gdb_regs():
Pull stuff saved during switch_to; nothing else is accessible (or
even particularly relevant). This should be enough for a stack
trace.
...and if you look at switch_to() it only saves r4-r11, sp and lr.
Those are the same registers that I'm getting out of the
task_thread_info().
With this change you can use "info thread" to see all tasks in the
kernel and you can switch to other tasks and examine them in gdb.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Stephen Boyd <sboyd@codeurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
IOMMU-based dma_mmap() implementation lacked proper support for offset
parameter used in mmap call (it always assumed that mapping starts from
offset zero). This patch adds support for offset parameter to IOMMU-based
implementation.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org # v3.6+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
dma_mmap() function in IOMMU-based dma-mapping implementation lacked
a check for valid range of mmap parameters (offset and buffer size), what
might have caused access beyond the allocated buffer. This patch fixes
this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org # v3.6+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Mark Brand reports that a NEEDS_SYSCALL_FOR_CMPXCHG enabled kernel would
open a security hole in the ghost syscall used to implement cmpxchg, as
it fails to validate the user pointer.
However, in order for this option to be enabled, you'd need to be
building a pre-ARMv6 kernel with SMP support. There is only one system
known which fits that, which is an early ARM SMP FPGA implementation
based on the ARM926T.
In any case, the Kconfig does not allow SMP to be enabled for pre-ARMv6
systems.
Moreover, even if NEEDS_SYSCALL_FOR_CMPXCHG were to be enabled, the
kernel would not build as __ARM_NR_cmpxchg64 is not defined.
The simple answer is to remove the buggy code.
Reported-by: Mark Brand <markbrand@google.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add unwinding annotations so that unwinding from this function
works properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Header <asm/kdebug.h> is not needed for arm/hw_breakpoint.c, so remove
the pointless #include.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This reverts commit 904464b91e.
The problem pointed out by commit 904464b91e ("ARM: 7655/1:
smp_twd: make twd_local_timer_of_register() no-op for nosmp")
doesn't exist anymore.
We can safely boot with nosmp and the warning won't show up.
The other side benefit of this patch is that TWD has a chance
to probe on single-core A9 systems such as AM437x which sport
TWD.
While at that, also drop SMP dependency from TWD's Kconfig entry.
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There is a 12MB unused region in our memory map between the vmalloc and
fixmap areas. This became unused with commit e9da6e9905, confirmed
with commit 64d3b6a3f4.
We also have a 8MB guard area before the vmalloc area. With the default
240MB vmalloc area size and the current VMALLOC_END definition, that
means the end of low memory ends up at 0xef800000 which is unfortunate
for 768MB machines where 8MB of RAM is lost to himem.
Let's move VMALLOC_END to 0xff800000 so the guard area won't chop the
top of the 768MB low memory area while keeping the default vmalloc area
size unchanged and still preserving a gap between the vmalloc and fixmap
areas.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16MB alignment for ioremap mappings was added by commit a069c896d0 ("[ARM]
3705/1: add supersection support to ioremap()") in order to support supersection
mappings. But __arm_ioremap_pfn_caller uses section and supersection mappings
only in !SMP && !LPAE case. There is no need for such big alignment if either
SMP or LPAE is enabled.
After this change, ioremap will use default maximum alignment of 128 pages.
Link: https://lkml.kernel.org/g/1419328813-2211-1-git-send-email-d.safonov@partner.samsung.com
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Signed-off-by: Sergey Dyasly <s.dyasly@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The core framework does not modify smp_operations structures.
To clarify it, this commit adds 'const' qualifier to the 'ops'
member of struct of_cpu_method and the 'smp' member of struct
machine_desc.
This change allows each SoC code to add 'const' qualifier to its
smp_operation structure.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This function just copies '*ops' to 'smp_ops', so the given
structure '*ops' is not modified at all.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds imprecise abort enable/disable macros and uses them to
enable imprecise aborts early when starting the kernel.
This helps in tracking down the real cause for such imprecise abort, as
they are handled as soon as they occur. Until now those aborts would
only be enabled when entering the userspace and as a consequence crash
the first userspace process if any abort had been raised during kernel
startup.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull ARM fixes from Russell King:
"Three fixes and a resulting cleanup for -rc2:
- Andre Przywara reported that he was seeing a warning with the new
cast inside DMA_ERROR_CODE's definition, and fixed the incorrect
use.
- Doug Anderson noticed that kgdb causes a "scheduling while atomic"
bug.
- OMAP5 folk noticed that their Thumb-2 compiled X servers crashed
when enabling support to cover ARMv6 CPUs due to a kernel bug
leaking some conditional context into the signal handler"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints
ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition
ARM: get rid of needless #if in signal handling code
ARM: fix Thumb2 signal handling when ARMv6 is enabled
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJV+/ucAAoJEL/70l94x66DV8YH/1KDym/1GJ+/Br/YkHZnM53l
3Q0PwSLu9cNcIL9lUuDLwGTaVj+y8ud1Hjr/uzvKwivktmUYVZhkdtnZmnanvGOM
qKB9K3nFXCPx8uqy8Dn7fOwEKcg9FmDOTTkWy13HDnXO+V4crSVVt+rPw+6FUMld
NV5tYdw9Lu7y3XrveDebPWaPtyDL7OAagzmeK47eMffxG7X9Hf1H2aT7HueRi7x/
SkLIe3gmiOWmHVJDPE9TOmFYIj19gywDFysKes1gdVJLVUIXiELMT7SrvAYnToVB
zISIEj7Zx4SINPxpf2dUn8REm7NsmJY+PffLIl/Nv+ozGggFQGFH0SMZ08p0bxw=
=tfmn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Mostly stable material, a lot of ARM fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
sched: access local runqueue directly in single_task_running
arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'
arm64: KVM: Remove all traces of the ThumbEE registers
arm: KVM: Disable virtual timer even if the guest is not using it
arm64: KVM: Disable virtual timer even if the guest is not using it
arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resources
KVM: s390: Replace incorrect atomic_or with atomic_andnot
arm: KVM: Fix incorrect device to IPA mapping
arm64: KVM: Fix user access for debug registers
KVM: vmx: fix VPID is 0000H in non-root operation
KVM: add halt_attempted_poll to VCPU stats
kvm: fix zero length mmio searching
kvm: fix double free for fast mmio eventfd
kvm: factor out core eventfd assign/deassign logic
kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfd
KVM: make the declaration of functions within 80 characters
KVM: arm64: add workaround for Cortex-A57 erratum #852523
KVM: fix polling for guest halt continued even if disable it
arm/arm64: KVM: Fix PSCI affinity info return value for non valid cores
arm64: KVM: set {v,}TCR_EL2 RES1 bits
...
Pull irq updates from Thomas Gleixner:
"This is a rather large update post rc1 due to the final steps of
cleanups and API changes which had to wait for the preparatory patches
to hit your tree.
- Regression fixes for ARM GIC irqchips
- Regression fixes and lockdep anotations for renesas irq chips
- The leftovers of the cleanup and preparatory patches which have
been ignored by maintainers
- Final conversions of the newly merged users of obsolete APIs
- Final removal of obsolete APIs
- Final removal of ARM artifacts which had been introduced during the
conversion of ARM to the generic interrupt code.
- Final split of the irq_data into chip specific and common data to
reflect the needs of hierarchical irq domains.
- Treewide removal of the first argument of interrupt flow handlers,
i.e. the irq number, which is not used by the majority of handlers
and simple to retrieve from the other argument the irq descriptor.
- A few comment updates and build warning fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
arm64: Remove ununsed set_irq_flags
ARM: Remove ununsed set_irq_flags
sh: Kill off set_irq_flags usage
irqchip: Kill off set_irq_flags usage
gpu/drm: Kill off set_irq_flags usage
genirq: Remove irq argument from irq flow handlers
genirq: Move field 'msi_desc' from irq_data into irq_common_data
genirq: Move field 'affinity' from irq_data into irq_common_data
genirq: Move field 'handler_data' from irq_data into irq_common_data
genirq: Move field 'node' from irq_data into irq_common_data
irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag
irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag
genirq: Provide IRQD_FORWARDED_TO_VCPU status flag
genirq: Simplify irq_data_to_desc()
genirq: Remove __irq_set_handler_locked()
pinctrl/pistachio: Use irq_set_handler_locked
gpio: vf610: Use irq_set_handler_locked
powerpc/mpc8xx: Use irq_set_handler_locked()
powerpc/ipic: Use irq_set_handler_locked()
powerpc/cpm2: Use irq_set_handler_locked()
...
Pull x86 fix from Thomas Gleixner:
"A single regression fix for the x86 dma allocator which got wreckaged
in the merge window"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/dma: Fix gfp flags for coherent DMA memory allocation
- Fix 32-bit TCE table init in kdump kernel from Nish
- Fix kdump with non-power-of-2 crashkernel= from Nish
- Abort cxl_pci_enable_device_hook() if PCI channel is offline from Andrew
- Fix to release DRC when configure_connector() fails from Bharata
- Wire up sys_userfaultfd()
- Fix race condition in tearing down MSI interrupts from Paul
- Fix unbalanced pci_dev_get() in cxl_probe() from Daniel
- Fix cxl build failure due to -Wunused-variable gcc behaviour change from Ian
- Tell the toolchain to use ABI v2 when building an LE boot wrapper from Benh
- Fix THP to recompute hash value after a failed update from Aneesh
- 32-bit memcpy/memset: only use dcbz once cache is enabled from Christophe
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Dgn5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix 32-bit TCE table init in kdump kernel from Nish
- Fix kdump with non-power-of-2 crashkernel= from Nish
- Abort cxl_pci_enable_device_hook() if PCI channel is offline from
Andrew
- Fix to release DRC when configure_connector() fails from Bharata
- Wire up sys_userfaultfd()
- Fix race condition in tearing down MSI interrupts from Paul
- Fix unbalanced pci_dev_get() in cxl_probe() from Daniel
- Fix cxl build failure due to -Wunused-variable gcc behaviour change
from Ian
- Tell the toolchain to use ABI v2 when building an LE boot wrapper
from Benh
- Fix THP to recompute hash value after a failed update from Aneesh
- 32-bit memcpy/memset: only use dcbz once cache is enabled from
Christophe
* tag 'powerpc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc32: memset: only use dcbz once cache is enabled
powerpc32: memcpy: only use dcbz once cache is enabled
powerpc/mm: Recompute hash value after a failed update
powerpc/boot: Specify ABI v2 when building an LE boot wrapper
cxl: Fix build failure due to -Wunused-variable behaviour change
cxl: Fix unbalanced pci_dev_get in cxl_probe
powerpc/MSI: Fix race condition in tearing down MSI interrupts
powerpc: Wire up sys_userfaultfd()
powerpc/pseries: Release DRC when configure_connector fails
cxl: abort cxl_pci_enable_device_hook() if PCI channel is offline
powerpc/powernv/pci-ioda: fix kdump with non-power-of-2 crashkernel=
powerpc/powernv/pci-ioda: fix 32-bit TCE table init in kdump kernel
Merge misc fixes from ANdrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
revert "mm: make sure all file VMAs have ->vm_ops set"
MAINTAINERS: update LTP mailing list
userfaultfd: add missing mmput() in error path
lib/string_helpers.c: fix infinite loop in string_get_size()
alpha: lib: export __delay
alpha: io: define ioremap_uc
kasan: fix last shadow judgement in memory_is_poisoned_16()
zram: fix possible use after free in zcomp_create()
__delay was not exported as a result while building with allmodconfig we
were getting build error of undefined symbol. __delay is being used by:
drivers/net/phy/mdio-octeon.c
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ioremap_uc was not defined and as a result while building with
allmodconfig were getting build error of: implicit declaration of
function 'ioremap_uc'.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A mixture of fixes for regressions introduced during the merge window,
some longer standing problems that we spotted and a couple of hardware
errata. The main changes are:
- Fix fallout from the h/w DBM patches, causing filesystem writeback
issues on both v8 and v8.1 CPUs
- Workaround for Cortex-A53 erratum #843419 in the module loader
- Fix for long-standing issue with compat big-endian signal handlers
using the saved floating point state
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Bc04
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This addresses some problems with filesystem writeback due to the
recently merged hardware DBM patches, which caused us to treat some
read-only pages as dirty.
There are also some other, less significant fixes that are described
in the summary below:
A mixture of fixes for regressions introduced during the merge window,
some longer standing problems that we spotted and a couple of hardware
errata. The main changes are:
- Fix fallout from the h/w DBM patches, causing filesystem writeback
issues on both v8 and v8.1 CPUs
- Workaround for Cortex-A53 erratum #843419 in the module loader
- Fix for long-standing issue with compat big-endian signal handlers
using the saved floating point state"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: add module build workaround for erratum #843419
arm64: compat: fix vfp save/restore across signal handlers in big-endian
arm64: cpu hotplug: ensure we mask out CPU_TASKS_FROZEN in notifiers
arm64: head.S: initialise mdcr_el2 in el2_setup
arm64: enable generic idle loop
arm64: pgtable: use a single bit for PTE_WRITE regardless of DBM
arm64: Fix pte_modify() to preserve the hardware dirty information
arm64: Fix the pte_hw_dirty() check when AF/DBM is enabled
arm64: dma-mapping: check whether cma area is initialized or not
Pull x86 fixes from Ingo Molnar:
- misc fixes all around the map
- block non-root vm86(old) if mmap_min_addr != 0
- two small debuggability improvements
- removal of obsolete paravirt op
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Fix Geode LX timekeeping in the generic x86 build
x86/apic: Serialize LVTT and TSC_DEADLINE writes
x86/ioapic: Force affinity setting in setup_ioapic_dest()
x86/paravirt: Remove the unused pv_time_ops::get_tsc_khz method
x86/ldt: Fix small LDT allocation for Xen
x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help text
x86/cpu: Print family/model/stepping in hex
x86/vm86: Block non-root vm86(old) if mmap_min_addr != 0
x86/alternatives: Make optimize_nops() interrupt safe and synced
x86/mm/srat: Print non-volatile flag in SRAT
x86/cpufeatures: Enable cpuid for Intel SHA extensions
Pull perf fixes from Ingo MOlnar:
"Mostly tooling fixes, but also two x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests: Fix software clock events test setting maps
perf tests: Fix task exit test setting maps
perf evlist: Fix create_syswide_maps() not propagating maps
perf evlist: Fix add() not propagating maps
perf evlist: Factor out a function to propagate maps for a single evsel
perf evlist: Make create_maps() use set_maps()
perf evlist: Make set_maps() more resilient
perf evsel: Add own_cpus member
perf evlist: Fix missing thread_map__put in propagate_maps()
perf evlist: Fix splice_list_tail() not setting evlist
perf evlist: Add has_user_cpus member
perf evlist: Remove redundant validation from propagate_maps()
perf evlist: Simplify set_maps() logic
perf evlist: Simplify propagate_maps() logic
perf top: Fix segfault pressing -> with no hist entries
perf header: Fixup reading of HEADER_NRCPUS feature
perf/x86/intel: Fix constraint access
perf/x86/intel/bts: Set event->hw.itrace_started in pmu::start to match the new logic
perf tools: Fix use of wrong event when processing exit events
perf tools: Fix parse_events_add_pmu caller
Pull locking fixes from Ingo Molnar:
"Spinlock performance regression fix, plus documentation fixes"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/static_keys: Fix up the static keys documentation
locking/qspinlock/x86: Only emit the test-and-set fallback when building guest support
locking/qspinlock/x86: Fix performance regression under unaccelerated VMs
locking/static_keys: Fix a silly typo
- Workaround for a Cortex-A57 erratum
- Bug fix for the debugging infrastructure
- Fix for 32bit guests with more than 4GB of address space
on a 32bit host
- A number of fixes for the (unusual) case when we don't use
the in-kernel GIC emulation
- Removal of ThumbEE handling on arm64, since these have been
dropped from the architecture before anyone actually ever
built a CPU
- Remove the KVM_ARM_MAX_VCPUS limitation which has become
fairly pointless
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV+slQAAoJECPQ0LrRPXpD+WUQAMLC3ZUasJX1gsVixd++zAwB
FXu0TFlKCUsLWllXZtyhGI6ya7ljuCzfhRbA/eZFmFVbwDnULt1p5ahw7eHCIZ2a
yY93TS6XN3YHwVpY7f2lDsvLhBLyWeTdWhj5TtLy6mslQyEUqxdmsiC7gl40Fp2S
8tKIxoYYRpmbgKl/Lbi8GxdHH6c0aQ2Nt7Fq4nV9dJqy5tiGdg6OxqgU/rVmkdkv
Rv1jrdtncstNRi9NBbKRRDp5DTqWboF35HJQpdIRpR8jJTLuuzzCimP5Hz9crKuO
uXchIq2GtQB60NklZtPL15zMdmfdq+JHwdC14v05kB5Ai8NThGwKYQ3JF+krO3cG
RKsAlrIq0AwPN8hAboLcKGzjLFFryaHZsa+d7elxaaDQz1FGz4uP56fIUURoGZuX
vWTsKLRKcuPCYtnV6Frg2BCTB6nq1cRgjmMC9TABnraelZ3z0lDl4wFngg4aL2u6
QYOdP8L++/S1HAPOF7VhFYndXkbM3KoVLAepev8jvzRnwg4QVrqsvfgwFSdMNcMz
ga7bJ4pUEP+Qq1i0qc41P9O708bCGm7TIw3CzTdKIZhc/l0t137lw1rhv67JfXZh
cAni4osjhpdZUT0F9lIl/6OQB3Kgk6on3cs909Y/tT1srh9s+iVO1AwpGY1j5T4j
gFRy90o2LBuepoI/8yF3
=NNtz
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.3-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
Second set of KVM/ARM changes for 4.3-rc2
- Workaround for a Cortex-A57 erratum
- Bug fix for the debugging infrastructure
- Fix for 32bit guests with more than 4GB of address space
on a 32bit host
- A number of fixes for the (unusual) case when we don't use
the in-kernel GIC emulation
- Removal of ThumbEE handling on arm64, since these have been
dropped from the architecture before anyone actually ever
built a CPU
- Remove the KVM_ARM_MAX_VCPUS limitation which has become
fairly pointless
Commit 6894258eda reversed the order of gfp_flags adjustment in
dma_alloc_attrs() for x86 [arch/x86/kernel/pci-dma.c] As a result,
relevant flags set by dma_alloc_coherent_gfp_flags() are just
discarded and cause coherent DMA memory allocation failure on some
devices.
Fixes: 6894258eda ("dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20150914073834.GA13077@xzibit.linux.bs1.fc.nec.co.jp
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes config option of KVM_ARM_MAX_VCPUS,
and like other ARCHs, just choose the maximum allowed
value from hardware, and follows the reasons:
1) from distribution view, the option has to be
defined as the max allowed value because it need to
meet all kinds of virtulization applications and
need to support most of SoCs;
2) using a bigger value doesn't introduce extra memory
consumption, and the help text in Kconfig isn't accurate
because kvm_vpu structure isn't allocated until request
of creating VCPU is sent from QEMU;
3) the main effect is that the field of vcpus[] in 'struct kvm'
becomes a bit bigger(sizeof(void *) per vcpu) and need more cache
lines to hold the structure, but 'struct kvm' is one generic struct,
and it has worked well on other ARCHs already in this way. Also,
the world switch frequecy is often low, for example, it is ~2000
when running kernel building load in VM from APM xgene KVM host,
so the effect is very small, and the difference can't be observed
in my test at all.
Cc: Dann Frazier <dann.frazier@canonical.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Although the ThumbEE registers and traps were present in earlier
versions of the v8 architecture, it was retrospectively removed and so
we can do the same.
Whilst this breaks migrating a guest started on a previous version of
the kernel, it is much better to kill these (non existent) registers
as soon as possible.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[maz: added commend about migration]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When running a guest with the architected timer disabled (with QEMU and
the kernel_irqchip=off option, for example), it is important to make
sure the timer gets turned off. Otherwise, the guest may try to
enable it anyway, leading to a screaming HW interrupt.
The fix is to unconditionally turn off the virtual timer on guest
exit.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When running a guest with the architected timer disabled (with QEMU and
the kernel_irqchip=off option, for example), it is important to make
sure the timer gets turned off. Otherwise, the guest may try to
enable it anyway, leading to a screaming HW interrupt.
The fix is to unconditionally turn off the virtual timer on guest
exit.
Cc: stable@vger.kernel.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can
lead to a memory access using an incorrect address in certain sequences
headed by an ADRP instruction.
There is a linker fix to generate veneers for ADRP instructions, but
this doesn't work for kernel modules which are built as unlinked ELF
objects.
This patch adds a new config option for the erratum which, when enabled,
builds kernel modules with the mcmodel=large flag. This uses absolute
addressing for all kernel symbols, thereby removing the use of ADRP as
a PC-relative form of addressing. The ADRP relocs are removed from the
module loader so that we fail to load any potentially affected modules.
Cc: <stable@vger.kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When saving/restoring the VFP registers from a compat (AArch32)
signal frame, we rely on the compat registers forming a prefix of the
native register file and therefore make use of copy_{to,from}_user to
transfer between the native fpsimd_state and the compat_vfp_sigframe.
Unfortunately, this doesn't work so well in a big-endian environment.
Our fpsimd save/restore code operates directly on 128-bit quantities
(Q registers) whereas the compat_vfp_sigframe represents the registers
as an array of 64-bit (D) registers. The architecture packs the compat D
registers into the Q registers, with the least significant bytes holding
the lower register. Consequently, we need to swap the 64-bit halves when
converting between these two representations on a big-endian machine.
This patch replaces the __copy_{to,from}_user invocations in our
compat VFP signal handling code with explicit __put_user loops that
operate on 64-bit values and swap them accordingly.
Cc: <stable@vger.kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We have a couple of CPU hotplug notifiers for resetting the CPU debug
state to a sane value when a CPU comes online.
This patch ensures that we mask out CPU_TASKS_FROZEN so that we don't
miss any online events occuring due to suspend/resume.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
memset() uses instruction dcbz to speed up clearing by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memset(). Allthough no part of the code
explicitly uses memset(), GCC may make calls to it.
This patch modifies memset() such that at startup, memset()
unconditionally skip the optimised bloc that uses dcbz instruction.
Once the initial MMU is set up, in machine_init() we patch memset()
by replacing this inconditional jump by a NOP
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
memcpy() uses instruction dcbz to speed up copy by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memcpy(). Allthough no part of the code
explicitly uses memcpy(), GCC makes calls to it.
This patch modifies memcpy() such that at startup, memcpy()
unconditionally jumps to generic_memcpy() which doesn't use
the dcbz instruction.
Once the initial MMU is set up, in machine_init() we patch memcpy()
by replacing this inconditional jump by a NOP
Reported-by: Michal Sojka <sojkam1@fel.cvut.cz>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In (23a4e40 arm: kgdb: Handle read-only text / modules) we moved to
using patch_text() to set breakpoints so that we could handle the case
when we had CONFIG_DEBUG_RODATA. That patch used patch_text().
Unfortunately, patch_text() assumes that we're not in atomic context
when it runs since it needs to grab a mutex and also wait for other
CPUs to stop (which it does with a completion).
This would result in a stack crawl if you had
CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The
crawl looked something like:
BUG: scheduling while atomic: swapper/0/0/0x00010007
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34 #1073
Hardware name: Rockchip (Device Tree)
(unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24)
(show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8)
(dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c)
(__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668)
(__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4)
(schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234)
(schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188)
(wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24)
(wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70)
(__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54)
(stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8)
(__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44)
(stop_machine) from [<c00173e8>] (patch_text+0x28/0x34)
(patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c)
(kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60)
(kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc)
(dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4)
(gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c)
(kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0)
(kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c)
(kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c)
(do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34)
It turns out that when we're in kgdb all the CPUs are stopped anyway
so there's no reason we should be calling patch_text(). We can
instead directly call __patch_text() which assumes that CPUs have
already been stopped.
Fixes: 23a4e4050b ("arm: kgdb: Handle read-only text / modules")
Reported-by: Aapo Vienamo <avienamo@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 96231b2686: ("ARM: 8419/1: dma-mapping: harmonize definition
of DMA_ERROR_CODE") changed the definition of DMA_ERROR_CODE to use
dma_addr_t, which makes the compiler barf on assigning this to an
"int" variable on ARM with LPAE enabled:
*************
In file included from /src/linux/include/linux/dma-mapping.h:86:0,
from /src/linux/arch/arm/mm/dma-mapping.c:21:
/src/linux/arch/arm/mm/dma-mapping.c: In function '__iommu_create_mapping':
/src/linux/arch/arm/include/asm/dma-mapping.h:16:24: warning:
overflow in implicit constant conversion [-Woverflow]
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
^
/src/linux/arch/arm/mm/dma-mapping.c:1252:15: note: in expansion of
macro DMA_ERROR_CODE'
int i, ret = DMA_ERROR_CODE;
^
*************
Remove the actually unneeded initialization of "ret" in
__iommu_create_mapping() and move the variable declaration inside the
for-loop to make the scope of this variable more clear.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Remove the #if statement which caused trouble for kernels that support
both ARMv6 and ARMv7. Older architectures do not implement these bits,
so it should be safe to always clear them.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Until b26e5fdac4 ("arm/arm64: KVM: introduce per-VM ops"),
kvm_vgic_map_resources() used to include a check on irqchip_in_kernel(),
and vgic_v2_map_resources() still has it.
But now vm_ops are not initialized until we call kvm_vgic_create().
Therefore kvm_vgic_map_resources() can being called without a VGIC,
and we die because vm_ops.map_resources is NULL.
Fixing this restores QEMU's kernel-irqchip=off option to a working state,
allowing to use GIC emulation in userspace.
Fixes: b26e5fdac4 ("arm/arm64: KVM: introduce per-VM ops")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
[maz: reworked commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The offending commit accidentally replaces an atomic_clear with an
atomic_or instead of an atomic_andnot in kvm_s390_vcpu_request_handled.
The symptom is that kvm guests on s390 hang on startup.
This patch simply replaces the incorrect atomic_or with atomic_andnot
Fixes: 805de8f43c (atomic: Replace atomic_{set,clear}_mask() usage)
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all users of set_irq_flags and custom flags are converted to
genirq functions, the ARM specific set_irq_flags can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that all users of set_irq_flags and custom flags are converted to
genirq functions, the ARM specific set_irq_flags can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In 2007, commit 07190a08ee ("Mark TSC on GeodeLX reliable")
bypassed verification of the TSC on Geode LX. However, this code
(now in the check_system_tsc_reliable() function in
arch/x86/kernel/tsc.c) was only present if CONFIG_MGEODE_LX was
set.
OpenWRT has recently started building its generic Geode target
for Geode GX, not LX, to include support for additional
platforms. This broke the timekeeping on LX-based devices,
because the TSC wasn't marked as reliable:
https://dev.openwrt.org/ticket/20531
By adding a runtime check on is_geode_lx(), we can also include
the fix if CONFIG_MGEODEGX1 or CONFIG_X86_GENERIC are set, thus
fixing the problem.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1442409003.131189.87.camel@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A critical bug has been found in device memory stage1 translation for
VMs with more then 4GB of address space. Once vm_pgoff size is smaller
then pa (which is true for LPAE case, u32 and u64 respectively) some
more significant bits of pa may be lost as a shift operation is performed
on u32 and later cast onto u64.
Example: vm_pgoff(u32)=0x00210030, PAGE_SHIFT=12
expected pa(u64): 0x0000002010030000
produced pa(u64): 0x0000000010030000
The fix is to change the order of operations (casting first onto phys_addr_t
and then shifting).
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
[maz: fixed changelog and patch formatting]
Cc: stable@vger.kernel.org
Signed-off-by: Marek Majtyka <marek.majtyka@tieto.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
