When we remove component we need to reverse things which were done on
init, this consists of topology cleanup, lists cleanup and releasing
firmware.
Currently cleanup handlers are put in wrong places or otherwise missing.
So add proper component cleanup function and perform cleanups in it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If skl_probe_work() was not run driver ends up dereferencing NULL
pointer when operating on lists in skl_platform_unregister().
To fix this initialize lists in skl_create(). Also run
cancel_work_sync() before all cleanup functions, so we don't end up
unnecessarily running probe work.
Easily reproducible with:
while true; do modprobe snd_soc_skl; rmmod snd_soc_skl; done
(with the assumption that relevant drivers are added to blacklist on
system boot)
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HW recommends to set DUM bit on device power up, so that DPIB write
request occurs every frame regardless of whether DPIB has changed or
not. This addresses incorrect position reporting for capture streams.
Signed-off-by: Leoni Prodduvaka <leoni.prodduvaka@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 100 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add PCI IDs for Intel CometLake platforms, which from a software
point of view are extremely similar to Cannonlake platforms.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the refactoring of HD-audio display power management, the
display power status is managed per domain. Meanwhile the ASoC
hdac_hdmi driver still keeps and relies (incorrectly) on the
refcounting together with ASoC skl driver, and this leads to the
display state always on.
This patch is an attempt to address the regression by simplifying the
PM code of ASoC skl and hdac_hdmi drivers. Basically, since the
refactoring, we don't have to manage the display power at HD-audio
controller suspend / resume but only at HD-audio HDMI codec suspend /
resume. So the patch drops the superfluous snd_hdac_display_power()
calls in skl driver.
Meanwhile, in hdac_hdmi side, we rewrite the PM call just to re-use
the runtime PM callbacks like other drivers do. Now the logic is
simple: turn off at suspend and turn on at resume.
The patch also fixes the possibly missing display-power off at skl
driver removal as well as some error paths at probe.
Fixes: 029d92c289 ("ALSA: hda: Refactor display power management")
Reported-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For HDaudio and Skylake drivers, add module parameter "pci_binding"
When pci_binding == 0 (AUTO), the PCI class/subclass info is used to
select drivers based on the presence of the DSP.
pci_binding == 1 (LEGACY) forces the use of the HDAudio legacy driver,
even if the DSP is present.
pci_binding == 2 (ASOC) forces the use of the ASOC driver. The
information on the DSP presence is bypassed.
The value for the module parameter needs to be identical for both
drivers. This parameter is intended as a back-up solution if the
automatic detection fails or when the DSP usage fails. Such cases
should be reported on the alsa-devel mailing list for analysis.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers. There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:
- Preparatory work from Morimoto-san for merging the audio-graph and
audio-graph-scu cards.
- A merge of the TI OMAP and DaVinci directories, the OMAP product line
has been merged into the DaVinci product line so there is now a lot
of IP sharing which meant that the split directories just got in the
way. This has pulled in a few architecture changes as well.
- A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
- Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
controllers.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwY7KsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MFqB/4m9nlfUeXTpiSD1FgVIlMmdPNUg4V2
6Ybztaw4kRc5LuQN8PXQmaFLx020yAnLvI7Zzj7l3K8r6a9lfyFs+pKL0wtBnNK2
9QEFmOVQ3QFpt31Yb2IQeO4dfNbiyKeczjLau4mXWTl0j5dc/UH+HasE1dRZOxsC
rqJ8IsdibIVxVtQ7ZmcnU+y6XK0inBHAAh6ksMehsufShGrfrLs/nRBaXRZcRqJg
ciSFY5uYRYkDxTgogTpNRfVy4nr17N10+0sgrQ3RtaaqgG3gBXsHca1meyxKYW3Q
TssOJGIl3+uGiAMNyZqzxe5pAwwuGhZ3hAAAODtfYJQtAuAOW3/45Wqh
=phWF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v4.21
Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers. There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:
- Preparatory work from Morimoto-san for merging the audio-graph and
audio-graph-scu cards.
- A merge of the TI OMAP and DaVinci directories, the OMAP product line
has been merged into the DaVinci product line so there is now a lot
of IP sharing which meant that the split directories just got in the
way. This has pulled in a few architecture changes as well.
- A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
- Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
controllers.
The current SKYLAKE kconfig is a all-you-can-eat selection that will
support all known plaforms. This is however not necessarily a good
thing: most platforms for SKL and KBL don't support the DSP, but a
number of CNL/WHL ones do. Selecting this driver in all cases isn't
really smart and will require users to muck with blacklists.
Partition the configs to allow distributions to select on which
platform this driver is used. Keep the existing SND_SOC_INTEL_SKYLAKE
config to select everything for backwards compatibility. This patch does
not provide new functionality, only finer-grained choices in supported
platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add error logs to make probe debug easier.
Also remove hard-coded dependency on NHLT. NHLT literally stands for
NonHdaudioLinkTable and is only required for SSP/DMIC interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
bus->ppcap is now tested upfront, there is no need to re-check if the
hardware is exposed as needed. Remove tests and remove indentation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Check immediately if required HDaudio capabilities can't be found (no
PPCAP or no streams exposed in GCAP), and move all DMA inits after the
error tests.
PPCAP and GCAP are not reliable indicators of DSP presence, but if
they don't exist then the driver will not work.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing PPCAP and GCAP fields cannot be used reliably to
determine if the DSP is enabled by the BIOS. Instead rely on the
class/subclass information to find out if this driver can run or
not. The values in the code don't seem to be documented in publicly
available documents but are part of recommendations made to BIOS
writers and have been verified to be accurate on a number of
platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's with CNP, supposed to be equivalent with CNL entry.
Keep the existing declaration style for now, at a later point we may
transition and use PCI_DEVICE_DATA().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
After the recent refactoring, snd_hdac_display_power() doesn't return
any error, hence it can be defined to return void.
This makes many error checks redundant and allows us to reduce them
gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current HD-audio code manages the DRM audio power via too complex
redirections, and this seems even still unbalanced in a corner case as
Intel DRM CI has been intermittently reporting. This patch is a big
surgery for addressing the complexity and the possible unbalance.
Basically the patch changes the display PM in the following ways:
- Both HD-audio controller and codec drivers call a single helper,
snd_hdac_display_power(). (Formerly, the display power control from
a codec was done indirectly via link_power bus ops.)
- snd_hdac_display_power() receives the codec address index. For
turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER.
- snd_hdac_display_power() doesn't manage refcounts any longer, but
keeps the power status in bitmap. If any of controller or codecs is
turned on, the function updates the DRM power state via get_power()
or put_power().
Also this refactor allows us more cleanup:
- The link_power bus ops is dropped, so there is no longer indirect
management, as mentioned in the above.
- hdac_device link_power_control flag is moved to hda_codec
display_power_control flag, as it's only for HDA legacy.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some reason we have different mechanisms for passing data to
machine drivers. Use the solution used by Atom/SST and SOF instead of
using drv_data as done by Skylake.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The changes for HDaudio overlooked the fact that the machine drivers
used for Chromebooks rely on the dmic number information passed as
pdata.
Add dmic_num field to standard interface and use standard interface
instead of SKL-specific one.
Also clean-up pdata definition to remove fields that are no longer
used.
Fixes: 842bb5135f ('ASoC: Intel: use standard interface for Hdaudio machine driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Skylake driver currently has a set of problems supporting
load/unload modules. We need to make the HDaudio codec support
optional to help narrow down the issues.
Support for HDaudio codecs also leads to a Kconfig issue. We want the
hdac_hda codec to be compilable independently of Skylake (e.g. with
ALL_CODECS) but when Skylake is selected as built-in the hdac_hda
codec needs to use the same option due a a code dependency
Solve both problems by adding a user-selectable boolean Kconfig,
select HDAC_HDA as needed and make the HDaudio codec support in the
Skylake driver optional. Tests on a Chell Chromebook device without
HDaudio show no regression for speaker and HDMI playback.
This is submitted as an RFC to allow for comments and more validation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On certain platforms, Display HDMI HDA codec was not going to sleep state
after the use when links are powered down after turning off the display
power. As per the HW recommendation, links are powered down before turning
off the display power to ensure that the codec goes to sleep state.
This patch was updated from an earlier version submitted upstream [1]
which conflicted with the changes merged for HDaudio codec support
with the Intel DSP.
[1] https://patchwork.kernel.org/patch/10540213/
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't rely on internal Skylake-specific data structures, use
generic interface to let other drivers use the same machine driver
as is, e.g. SOF to support HDaudio codecs and HDMI outputs.
Tested on LeafHill CRB board, no regression seen with this change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which
1) sets bus->chip_init to prevent multiple entrances before device
is stopped; 2) enables interrupt.
We shouldn't use it for the purpose of resetting device only because
1) when we really want to initialize device, we won't be able to do
so; 2) we are ready to handle interrupt yet, and kernel crashes when
interrupt comes in.
Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset
device properly.
Fixes: 60767abcea ("ASoC: Intel: Skylake: Reset the controller in probe")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 12eeeb4f47.
The patch doesn't fix accessing memory with null pointer in
skl_interrupt().
There are two problems: 1) skl_init_chip() is called twice, before
and after dma buffer is allocate. The first call sets bus->chip_init
which prevents the second from initializing bus->corb.buf and
rirb.buf from bus->rb.area. 2) snd_hdac_bus_init_chip() enables
interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers.
There is a small window which skl_interrupt() can be called if irq
has been acquired. If so, it crashes when using null dma buffer
pointers.
Will fix the problems in the following patches. Also attaching the
crash for future reference.
[ 16.949148] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
<snipped>
[ 16.950903] Call Trace:
[ 16.950906] <IRQ>
[ 16.950918] skl_interrupt+0x19e/0x2d6 [snd_soc_skl]
[ 16.950926] ? dma_supported+0xb5/0xb5 [snd_soc_skl]
[ 16.950933] __handle_irq_event_percpu+0x27a/0x6c8
[ 16.950937] ? __irq_wake_thread+0x1d1/0x1d1
[ 16.950942] ? __do_softirq+0x57a/0x69e
[ 16.950944] handle_irq_event_percpu+0x95/0x1ba
[ 16.950948] ? _raw_spin_unlock+0x65/0xdc
[ 16.950951] ? __handle_irq_event_percpu+0x6c8/0x6c8
[ 16.950953] ? _raw_spin_unlock+0x65/0xdc
[ 16.950957] ? time_cpufreq_notifier+0x483/0x483
[ 16.950959] handle_irq_event+0x89/0x123
[ 16.950962] handle_fasteoi_irq+0x16f/0x425
[ 16.950965] handle_irq+0x1fe/0x28e
[ 16.950969] do_IRQ+0x6e/0x12e
[ 16.950972] common_interrupt+0x7a/0x7a
[ 16.950974] </IRQ>
<snipped>
[ 16.951031] RIP: snd_hdac_bus_update_rirb+0x19b/0x4cf [snd_hda_core] RSP: ffff88015c807c08
[ 16.951036] ---[ end trace 58bf9ece1775bc92 ]---
Fixes: 2eeeb4f4733b ("ASoC: Intel: Skylake: Acquire irq after RIRB allocation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a kernel module which is used by the legacy HDA
codec drivers as library. This implements hdac_ext_bus_ops to enable
the reuse of legacy HDA codec drivers with ASoC platform drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use hda_bus instead of hdac_bus in the SKL ASoC platform driver to enable
reuse of legacy HDA codec drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When no I2S based codec entries are found in the BIOS, check if there are
any HDA codecs detected on the bus. Based on the number of codecs found
take appropriate action in machine driver. If there are two HDA codecs
i.e. iDisp + HDA found on the bus, register DAIs and DAI links for both.
If only one codec i.e. iDisp is found then load only iDisp machine driver.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cold reboot stress test found that the hda irq could access rirb ring
buffer before its memory gets allocated which resulting in null
pointer dereference inside snd_hdac_bus_update_rirb().
Fix it by moving the skl_acquire_irq after ring buffer allocation.
While here, also change err return from -EBUSY to actual error code.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add extended ops in the hdac_bus to allow calling the ASoC HDAC library
ops to reuse the legacy HDA codec drivers with ASoC framework.
Extended ops are used by the legacy codec drivers to call into
hdac_hda library, in the subsequent patches..
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove memory allocation within snd_hdac_ext_bus_device_init, to make
its behaviour identical to snd_hdac_bus_device_init. So that caller
can allocate the parent data structure containing hdac_device.
This API change helps in reusing the legacy HDA codec drivers with
ASoC platform drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the hdac_ext_bus structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.
Follow-up patches in this series handle the driver definition.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No functionality change, just move to common tables to make it easier
to deal with SOF and share the same machine drivers - as done
previously for BYT/CHT/HSW/BDW.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to deal with DMICs if the DSP is not present and
there is no ACPI machine ID found.
Simplify before moving these ACPI tables to sound/soc/intel/common
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use truncated names in bxt id table and bxt_da7219_max98357a machine
as platform device id table expects names to be less then 20chars.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
By default all the streams are mapped to all links after controller is
reset which causes stream to be broadcast on all the links.
This patch resets the stream-link mapping after controller reset. The
stream is mapped later to the appropriate link as part of stream setup.
Tested-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to achieve better DMA performance and reduce download time for
firmware and library, it is recommended to disable dynamic clock and
power gating. In some scenarios, DMA may wait to accumulate more data and
last chunk of data never gets completed if dynamic clock and power
gating is kept enabled.
This patch adds support to disable/enable dynamic clock and power gating
and use it during firmware and library download.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform registration happens in probe work handler whereas machine
device is registered during skl_probe. This sometimes results in cpu
dais not found if the work handler is sufficiently delayed due to system
load, even with deferred probe of machine driver.
So move machine device registration after registering platform.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some functions are local to the source and do not need to be in global
scope, so make them static.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When NHLT endpoint is present for a SSP then we create clock for that SSP.
MCLK is consistent across endpoints and configuration for an SSP, so query
only for first endpoint for an SSP.
For SCLK/SCLKFS, the best fit is queried from the NHLT configurations which
matches the clock rate requested. Best fit is decided based on below:
1. If rate matches with multiple configurations, then the first
configuration is selected.
2. If for a selected fs and bits_per_sample, there are multiple endpoint
configuration match, then the configuration with max number of
channels is selected. So, the user has to set the rate which fits
max number of channels
So we create a platform device and pass clock information parsed as
platform data.
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_SND_SOC_HDAC_HDMI is disabled, we can run into an
uninitialized variable:
sound/soc/intel/skylake/skl.c: In function 'skl_resume':
sound/soc/intel/skylake/skl.c:326:6: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I have run into this on today's linux-next kernel, but it appears
that this is an older problem that was just hard to trigger
with randconfig builds as CONFIG_SND_SOC_HDAC_HDMI would in
effect be impossible to disable when having SND_SOC_INTEL_SKYLAKE
enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ACPI support is not specific to the Intel/SST driver. Move the enumeration
and matching code which is not hardware-dependent to sound/soc and rename
relevant sst_acpi_ structures and functions with snd_soc_acpi_ prefix
soc-acpi.h is protected by a #ifndef __LINUX_SND_SOC_ACPI_H for
consistency with all other SoC .h files:
grep -L __LINUX include/sound/soc* | wc -l
0
grep __LINUX include/sound/soc* | wc -l
14
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To make it consistent, add sentinel for sst_cnl_devdata also.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since FE dais can come from topology, split the FE dais from existing
dai array so that FE dais need not be registered if they come from
topology. Add use_tplg_pcm flag to check whether FE dais will be
registered from topology during dai driver component registration.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
