- Switch from fixed to firmware based clock driver
- Wire power domain driver
- Wire all ina226 chips through IIO and IIO hwmon drivers
- Add missing dr_mode property to usb nodes
- Use gpio-line-names property instead of comments
- Use clock-output-names for si570 differentiation
- Minor DT fixes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXibMLgAKCRDKSWXLKUoM
IQW6AJ9Szg4yizku9Q6oi+yrR6L3eRxnyACcDiM4EeKIvrlK19cYVnd/58ENPs8=
=k6/g
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: zynqmp: DT changes for v5.6
- Switch from fixed to firmware based clock driver
- Wire power domain driver
- Wire all ina226 chips through IIO and IIO hwmon drivers
- Add missing dr_mode property to usb nodes
- Use gpio-line-names property instead of comments
- Use clock-output-names for si570 differentiation
- Minor DT fixes
* tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx: (21 commits)
arm64: zynqmp: Add label property to all ina226 on zcu106
arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
arm64: zynqmp: Add label property to all ina226 on zcu102
arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
arm64: zynqmp: Add label property to all ina226 on zcu111
arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
arm64: zynqmp: Setup default number of chipselects for zcu100
arm64: zynqmp: Remove broken-cd from zcu100-revC
arm64: zynqmp: Fix the si570 clock frequency on zcu111
arm64: zynqmp: Setup clock-output-names for si570 chips
arm64: zynqmp: Turn comment to gpio-line-names
arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104
arm64: zynqmp: Remove addition number in node name
arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
arm64: dts: xilinx: Add the power nodes for zynqmp
arm64: dts: xilinx: Remove dtsi for fixed clock
arm64: dts: xilinx: Add the clock nodes for zynqmp
arm64: zynqmp: Add dr_mode property to usb node
arm64: dts: zynqmp: Use decimal values for drm-clock properties
...
Link: https://lore.kernel.org/r/c70d2efa-9ee2-a764-5248-0e5bfbf29f8a@monstr.eu
Signed-off-by: Olof Johansson <olof@lixom.net>
accross multiple socs.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl4k5D4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgfEbCACOCZhDKEttjrJckHExJzyEm+NThYTy4Mmt
FwKS10w3/Fp9Z+Pc7fZk/e1QZ6AlEQPjmy+Ls1r7D7MrkotmPy6YRI6R9OFoj/aw
eUCeo+plJUl2ij8oGgHNnWq6DJEm9cXcmCILuk8K3aj51fWMXH30L0F70lGxAuYb
G1Ta3lnZ22Yc46ie6rQuTU9xtpv2Oy7gtPnZ2uYPEs9T8GFHH/frnaJIyk0SaU4k
n7vWajLqoASDawZJ162+Tq2xtUpNF8CWdYTwtHlheVEC28g9H8f+XX+66x+plrGe
t0Prg62VWUaEn6w80JILxYwPEXh1eHXY7reM/bGwoIW+9U0UtxMX
=8p9R
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
DSI display for px30 evaluation board and a number of cleanups
accross multiple socs.
* tag 'v5.6-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Kill off "simple-panel" compatibles
arm64: dts: rockchip: rename dwmmc node names to mmc
arm64: dts: rockchip: hook up the px30-evb dsi display
arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine
arm64: dts: rockchip: add reg property to brcmf sub-nodes
arm64: dts: rockchip: fix dwmmc clock name for rk3308
arm64: dts: rockchip: fix dwmmc clock name for px30
Link: https://lore.kernel.org/r/7641353.lIegmeFAIi@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node,
so change them all to 'mmc'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200115185244.18149-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.
"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names. Therefore they should be written with lowercase letters starting
with capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Link: https://lore.kernel.org/r/20200117190305.5257-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Texas Instruments K3 SoC family changes for 5.6
- Add missing power domains for smmu for J721e
- Add I2C, ADC, OSPI and UFS nodes for J721e
- Add OSPI and MCU syscon nodes for am65x
- Add IRQ line for GPIO expander on am65x
* tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu
arm64: dts: ti: k3-am65-mcu: add system control module node
arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expander
arm64: dts: ti: k3-am65: Add OSPI DT node
arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials
Link: https://lore.kernel.org/r/c5b74bfc-f2f0-1b72-4a3c-4c1d478a023a@ti.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The Denali NAND controller IP has separate reset control for the
controller core and registers.
Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add power-domains entry for smmu, so that the it is accessible as long
as the driver is active. Without this device shutdown is throwing the
below warning:
"[ 44.736348] arm-smmu-v3 36600000.smmu: failed to clear cr0"
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The MCU System control module support is added to the device tree to allow
drivers to access to their System control module registers.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add IRQ line for IO expander present on wkup_i2c bus on AM654 EVM
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
AM654 SoC has two Cadence OSPI controller instances under Flash
subsystem (FSS). Add DT nodes for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
- add dynamic power coefficient to the cpu clusters
- add jpeg decoder node
mt8183:
- add node for the Global Command Engine (gce)
- add reset cells to the infracfg node
-----BEGIN PGP SIGNATURE-----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=d7+O
-----END PGP SIGNATURE-----
Merge tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt8173:
- add dynamic power coefficient to the cpu clusters
- add jpeg decoder node
mt8183:
- add node for the Global Command Engine (gce)
- add reset cells to the infracfg node
* tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: add reset-cells in infracfg
arm64: dts: mt8173: add Mediatek JPEG Codec
arm64: dts: add gce node for mt8183
arm64: dts: mt8173: Add dynamic power node.
Link: https://lore.kernel.org/r/46c1a244-3f74-8069-6600-8ced02775677@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
It's fairly big this time, but the highlights are:
- Enable cpufreq and CPU thermal throttling on the A64
- CLK_CPUX macro usage removed (changed from first pull request)
- CSI0 support on the R40
- CSI1 support on the A10 and A20
- SPI support on the R40
- PMU support on the H3, H5, H6 and R40
- MIPI-DSI support on the A64
- PWM support on the H6
- Thermal sensor on the A64, A83t, H3, H5, H6 and R40
- More DT schemas fixes and conversions
- New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5,
Pine64 H64 Model B, Neutis N5H3
-----BEGIN PGP SIGNATURE-----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=1h4A
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This is our usual set of DT patches for the Allwinner SoCs.
It's fairly big this time, but the highlights are:
- Enable cpufreq and CPU thermal throttling on the A64
- CLK_CPUX macro usage removed (changed from first pull request)
- CSI0 support on the R40
- CSI1 support on the A10 and A20
- SPI support on the R40
- PMU support on the H3, H5, H6 and R40
- MIPI-DSI support on the A64
- PWM support on the H6
- Thermal sensor on the A64, A83t, H3, H5, H6 and R40
- More DT schemas fixes and conversions
- New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5,
Pine64 H64 Model B, Neutis N5H3
* tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits)
arm64: dts: allwinner: a64: enable DVFS
arm64: dts: allwinner: a64: add dtsi with CPU operating points
arm64: dts: allwinner: a64: add cooling maps and thermal tripping points
arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes
arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks
ARM: dts: sunxi: Use macros for references to CCU clocks
arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board
ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes
arm64: dts: allwinner: a64: pinebook: Fix lid wakeup
ARM: dts: sun8i: r40: Add device node for CSI0
ARM: dts: sun7i: Add CSI1 controller and pinmux options
ARM: dts: sun4i: Add CSI1 controller and pinmux options
ARM: dts: sunxi: Add missing LVDS resets and clocks
ARM: dts: sun8i: r40: Use tcon top clock index macros
ARM: dts: sun8i: R40: Add PMU node
ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
arm64: dts: allwinner: h6: Add thermal sensor and thermal zones
ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board
arm64: dts: allwinner: a64: Add MIPI DSI pipeline
arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
...
Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell
board, LX2160A based Solidrun Clearfog CX and Honeycomb boards.
- Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC.
- Add Crypto CAAM support for i.MX8MM and i.MX8MN.
- Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN.
- Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
compatibles from i.MX8M SoCs.
- Add DDR controller nodes for i.MX8M devices.
- Add EEPROM description for imx8mq-hummingboard-pulse and
imx8mq-sr-som boards.
- Enable USB1 and TypeC support for imx8mn-evk board.
- Add FlexSPI and QSPI support for a few Layerscape SoCs and boards.
- Add External MDIO1 node and the two RGMII PHYs connected on LX2160A.
- Add missing SAI devices and set SAIs into async mode on LS1028A.
- Other random device additions and enhancement for various platforms.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4b4EYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Iwwf/ZqkWN7e4Am8MFMbw4aJ4WLMes1M5
pHWEl/vxLmOdrzY45pyLjxarkXlzEE/Q4iS0/k9g4FSjj2BCOzFjlJAskTPGF7Jh
YL02N32xPpsWHxJ04wX+VqZYrNkPH3ywpfgfOQzW9JWIs/Jz0PGB65SuniuHuhdr
Y1twDz1sVLVdMpp6dlfPtMFxRMydvjkvlXrk7HzFuyGbxeJnGzhWa4rUlVcQoKwm
+v/Hcn7B2CQgBzFgRQJUXEPntWFVPSB7c1nlx3iH4HHwGi14k5QbAfn6xBLyOwXQ
QN3MCpY4n2ankaJ5D3zBQ5kCt17EOGUOLaW4VC5RpSUKhafSZV4din8cWA==
=JSDg
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.6:
- New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell
board, LX2160A based Solidrun Clearfog CX and Honeycomb boards.
- Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC.
- Add Crypto CAAM support for i.MX8MM and i.MX8MN.
- Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN.
- Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
compatibles from i.MX8M SoCs.
- Add DDR controller nodes for i.MX8M devices.
- Add EEPROM description for imx8mq-hummingboard-pulse and
imx8mq-sr-som boards.
- Enable USB1 and TypeC support for imx8mn-evk board.
- Add FlexSPI and QSPI support for a few Layerscape SoCs and boards.
- Add External MDIO1 node and the two RGMII PHYs connected on LX2160A.
- Add missing SAI devices and set SAIs into async mode on LS1028A.
- Other random device additions and enhancement for various platforms.
* tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
arm64: dts: imx8mn: Memory node should be in board DT
arm64: dts: imx8mm: Memory node should be in board DT
arm64: dts: imx8mn: add crypto node
arm64: dts: imx8mq-hummingboard-pulse: add eeprom description
arm64: dts: imx8mq-sr-som: add eeprom description
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
arm64: dts: freescale: Add devicetree support for Thor96 board
arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor
arm64: dts: imx8mm: Add Crypto CAAM support
arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell
arm64: dts: ls1028a-rdb: enable emmc hs400 mode
arm64: dts: ls1028a: Update edma compatible to fit eDMA driver
arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals
arm64: dts: lx2160a: add dts for CEX7 platforms
arm64: dts: lx2160a: add emdio2 node
arm64: dts: ls1028a: put SAIs into async mode
arm64: dts: ls1028a: add missing sai nodes
arm64: dts: imx8mn-evk: enable usb1 and typec support
arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REF
...
Link: https://lore.kernel.org/r/20200113034006.17430-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
These patches do some cleanup to existing nodes, add the memory
subsystem on Tegra186 and Tegra194 as well as the FUSE and APB MISC
nodes on Tegra194. There are also a few additions to the Jetson Nano
device tree to enable additional features and the force recovery
button on the Jetson AGX Xavier now produces a key code that is
actually valid. Finally, an alias is added for the Ethernet card on
Jetson TX2 to allow firmware to find it and pass a MAC address via
device tree.
-----BEGIN PGP SIGNATURE-----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=lD4r
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.6-rc1
These patches do some cleanup to existing nodes, add the memory
subsystem on Tegra186 and Tegra194 as well as the FUSE and APB MISC
nodes on Tegra194. There are also a few additions to the Jetson Nano
device tree to enable additional features and the force recovery
button on the Jetson AGX Xavier now produces a key code that is
actually valid. Finally, an alias is added for the Ethernet card on
Jetson TX2 to allow firmware to find it and pass a MAC address via
device tree.
* tag 'tegra-for-5.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Allow bootloader to configure Ethernet MAC on Jetson TX2
arm64: tegra: Redefine force recovery key on Jetson AGX Xavier
arm64: tegra: Enable SDIO on Jetson Nano M.2 Key E
arm64: tegra: Enable PWM fan on Jetson Nano
arm64: tegra: Add fuse/apbmisc node on Tegra194
arm64: tegra: Make XUSB node consistent with the rest
arm64: tegra: Add the memory subsystem on Tegra194
arm64: tegra: Add external memory controller on Tegra186
arm64: tegra: Add interrupt for memory controller on Tegra186
arm64: tegra: Rename EMC on Tegra132
arm64: tegra: Let the EMC hardware use the EMC clock
Link: https://lore.kernel.org/r/20200111003553.2411874-7-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
We want to specify per-device firmware-name, so move the zap node into
the .dts file for individual boards/devices. This lets us get rid of
the /delete-node/ for cheza, which does not use zap.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200112195405.1132288-5-robdclark@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I missed the fact that these constants was not yet available, so hard
code their values in the dts to make the branch compile on its own.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Create the necessary display nodes to activate the Xingpeng XPP055C272
dsi display that can be found on the px30-evb.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191209145301.5307-2-heiko@sntech.de
Include mt8183-reset.h and add reset-cells in infracfg
in dtsi file
Signed-off-by: yong.liang <yong.liang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The mezzanine board carries an E key type M.2 slot. This is
connected to USB, SDIO and UART0. Enable sdio and uart0 for use
with wlan and/or bt M.2 cards.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20200109154211.1530-1-m.reichl@fivetechno.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
An experimental test with the command below gives this error:
rk3308-evb.dt.yaml: dwmmc@ff480000: clock-names:2:
'ciu-drive' was expected
'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
An experimental test with the command below gives this error:
px30-evb.dt.yaml: dwmmc@ff390000: clock-names:2:
'ciu-drive' was expected
'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add CPU regulator and operating points for all the A64-based boards
that are currently supported to enable DVFS.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add operating points for A64. These are taken from FEX file from BSP
for A64.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add cooling maps and thermal tripping points to prevent CPU overheating when
running at the highest frequency. Tripping points are taken from A33 dts since
A64 user manual doesn't mention when we should start throttling.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add CPU clock to the CPU nodes since it is a prerequisite for enabling
DVFS.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
[wens@csie.org: Replace CLK_CPUX macro with raw number]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
carrier board, separate versions for the two rockpro64 hardware revisions
which switched a pin between revisions. The rockpro64 also got
bluetooth support now.
The px30 got a lot of attention with dsi, gpu and thermal support.
Similarly the rk3399-roc-pc board also got attention with mtd flash,
sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements.
Other than that there is a new gpu-cooling device for rk3399 a cpu
idle-state for rk3328 and more small improvements across a number
of boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl4Xm7MQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXPbB/4/iuGhWfydiiB6Mrmeifzlt+Ch7Hm5IJBA
03f8FiHbGkW1Tlh1buw6t9BDKI0XKNqD94MU0pya4yDB7baFaH1GEk8S4/mbEAuE
OZnWM0jzQ40b/1JmwRCw0PL2NTFHwlE+SSHnBJ4EW/OnOsCYUSz8+Aq33fMwdsPA
Dm9gxAeeHsBJTxk26cxLrGePB5vYXltGwazklkKkU5scV75sfJu1xcRKcnVp71sH
4j33aWi19GWo2YkW6RGXzTgiXoFPR+PgzfU337KTqq6A5oSIybH9g2WUnYyAxi8R
tJKxiOBSBeGIrIRxMWtw8g9VxohJwzHfi9y4XO1VwzLpl/SQf3mb
=iCh7
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards are the Radxa Rock Pi N10 using the VMARC SOM and Dalang
carrier board, separate versions for the two rockpro64 hardware revisions
which switched a pin between revisions. The rockpro64 also got
bluetooth support now.
The px30 got a lot of attention with dsi, gpu and thermal support.
Similarly the rk3399-roc-pc board also got attention with mtd flash,
sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements.
Other than that there is a new gpu-cooling device for rk3399 a cpu
idle-state for rk3328 and more small improvements across a number
of boards.
* tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (37 commits)
arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and supports-emmc options
arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 node
arm64: dts: rockchip: Add PX30 LVDS
arm64: dts: rockchip: add dsi controller for px30
arm64: dts: rockchip: Add PX30 DSI DPHY
arm64: dts: rockchip: Add RK3328 idle state
arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikou
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support
ARM: dts: rockchip: Add Radxa Dalang Carrier board
arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N10 binding
arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64
arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64
arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards
arm64: dts: rockchip: enable the gpu on px30-evb
arm64: dts: rockchip: add the gpu for px30
dt-bindings: gpu: mali-bifrost: Add Rockchip PX30
arm64: dts: rockchip: Add GPU cooling device for RK3399
arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 board
...
Link: https://lore.kernel.org/r/5115625.yBEeHQkg2z@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add remote control map name of the IR device for the hi3798cv200 poplar board
- Correct the PCIe bus range setting for the hi3798cv200
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+4YO
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.6' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.6
- Add remote control map name of the IR device for the hi3798cv200 poplar board
- Correct the PCIe bus range setting for the hi3798cv200
* tag 'hisi-arm64-dt-for-5.6' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: correct PCIe 'bus-range' setting
arm64: dts: hi3798cv200-poplar: add linux,rc-map-name for IR
Link: https://lore.kernel.org/r/5E169EDE.8020809@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Add an ethernet alias so that a stable MAC address is added to the
device tree for the wired ethernet interface.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current BTN_1 code associated with the force-recovery key is not a
valid code for EV_KEY type input devices. This causes errors in the
libinput debug-events command.
There is no system level action that maps to the force-recovery key on
Jetson AGX Xavier, so assign it the KEY_SLEEP action, which at least
makes it do something marginally useful.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable PWM fan and extend CPU thermal zones for monitoring and fan control.
This will trigger the PWM fan on J15 and cool down the system if necessary.
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The ordering of properties in the XUSB node is inconsistent with the
ordering of the properties in other nodes. Resort them to make the node
more consistent. Also get rid of some unnecessary whitespace.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory subsystem on Tegra194 encompasses both the memory and
external memory controllers. The EMC is represented as a subnode of the
MC and a ranges property is used to describe the register ranges.
A dma-ranges property is also added to describe that all memory clients
can address up to 39 bits using the memory controller client interface
(MCCIF), unless otherwise limited by the DMA engines of the hardware. A
memory client can technically use 40 bits of addresses, but the memory
controller on Tegra194 uses bit 39 to determine the XBAR format used to
access memory. Use of this bit needs to be explicitly controlled by the
operating system drivers for devices that can use this on-the-fly format
conversion. Using the dma-ranges property prevents the operating system
from using the bit implicitly, for example in I/O virtual address
mappings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the external memory controller as a child device of the memory
controller on Tegra186. The memory controller really represents the
memory subsystem that encompasses both the memory and external memory
controllers. The external memory controller uses the BPMP to obtain the
list of supported EMC frequencies and set the EMC frequency.
Also set up the dma-ranges property to describe that all memory clients
can address up to 40 bits using the memory controller client interface
(MCCIF), unless otherwise limited by the DMA engines of the hardware.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory controller can be interrupted by certain conditions. Add the
interrupt to the device tree node to allow drivers to trap these
conditions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The EMC hardware block needs access to the EMC clock in order to scale
the external memory frequency. Add the clocks property so that drivers
for the EMC can acquire a reference to the EMC clock.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Label property is adding capability to distiguish chips from each other
when iio framework is used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Label property is adding capability to distiguish chips from each other
when iio framework is used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
