Commit Graph

139 Commits

Author SHA1 Message Date
Mark Brown
ae14dbfaa0 Merge remote-tracking branch 'asoc/topic/twl6040' into asoc-next 2016-05-27 13:45:30 +01:00
Peter Ujfalusi
45c04704e4 ASoC: twl6040: Disconnect AUX output pads on digital mute
Disconnect also the path to AUXL from the HF path during digital_mute to
avoid pop noise leakage to Line-out pads.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-18 17:57:22 +01:00
Peter Ujfalusi
1135ef1139 ASoC: twl6040: Select LPPLL during standby
When the codec is in standby we do not need to keep the HPPLL active.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-11 14:39:33 +01:00
Geliang Tang
bb18f0976e ASoC: twl6040, fsl: use to_platform_device
Use to_platform_device() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-24 19:42:42 +00:00
Mark Brown
28bedc5946 Merge remote-tracking branches 'asoc/topic/topology', 'asoc/topic/twl6040', 'asoc/topic/wm5100', 'asoc/topic/wm8741' and 'asoc/topic/wm8960' into asoc-next 2015-06-05 18:55:05 +01:00
Lars-Peter Clausen
d9dd37305e ASoC: twl6040: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm with snd_soc_codec_get_dapm().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-15 16:48:57 +01:00
Fabio Estevam
208ba89b40 ASoC: twl6040: Pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 19:47:47 +01:00
Lars-Peter Clausen
f4bf8d770b ASoC: Move bias level update to the core
All drivers have the same line at the end of the set_bias_level callback to
update the bias_level state. Move this update into
snd_soc_dapm_force_bias_level() and remove them from the drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27 21:34:45 +01:00
Lars-Peter Clausen
bd1204cb51 ASoC: Route all bias level updates through the core
Use the new snd_soc_codec_force_bias_level() helper function to invoke the
bias_level callback of a driver instead of calling the callback by hand.
Currently the effect of this is the same, but having all bias level updates
go through a central place will allow us to move more of the bias level
management into the DAPM core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27 21:34:45 +01:00
Lars-Peter Clausen
b27727df32 ASoC: twl6040: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Lars-Peter Clausen
c4ee42a050 ASoC: twl6040: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:18:27 +00:00
Wolfram Sang
c756e83d1a ASoC: codecs: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:07 +02:00
Lars-Peter Clausen
ea53bf77d1 ASoC: Add snd_soc_kcontrol_codec() helper function
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the
CODEC that registered the control. With the upcoming consolidation of
platform and CODEC controls this will change. Prepare for this by introducing
the snd_soc_kcontrol_codec() helper function that will hide the implementation
details of how the CODEC for a control can be obtained. This will allow us to
change this easily in the future.

The patch also updates all CODEC drivers to use the new helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:43 +01:00
Takashi Iwai
a1d0d786af ASoC: twl6040: Use SOC_ENUM_SINGLE_DECL()
Just replace with the helper macro.
Also, use ARRAY_SIZE() in some ASOC_ENUM_SINGLE() lines.

No functional change at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 11:30:28 +09:00
Lars-Peter Clausen
0d76fc6a47 ASoC: twl6040: Constify rate constraints
The rate constraints in this driver are shared between all device instances. It
should not be (and is not) modified at runtime, so make them const.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-07 12:17:24 +00:00
Peter Ujfalusi
626bcacb89 ASoC: twl6040: Remove self managed local reg_cache support
We can rely on mfd driver to manage the register caching via regmap. The
driver still need to cache some registers associated with DL1/2 routes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19 18:37:07 +00:00
Peter Ujfalusi
79ae513038 ASoC: twl6040: Remove register restore functionality
The MFD core takes care of the restore via standard regmap API, no need to
do this anymore here.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19 18:37:07 +00:00
Peter Ujfalusi
53509108f7 ASoC: twl6040: Custom caching for sensitive DL1/2 path registers
Introduce a small register cache for registers which needs special caching
to reduce pop noise:
TWL6040_REG_HSLCTL, TWL6040_REG_HSRCTL, TWL6040_REG_EARCTL, TWL6040_REG_HFLCTL
and TWL6040_REG_HFRCTL.
Switch over and use the new small cache for these registers instead of the
main reg_cache.
This is in preparation to remove the local ASoC reg_cache from the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19 18:37:06 +00:00
Peter Ujfalusi
0d35d080ac ASoC: twl6040: Rename twl6040_is_path_unmuted -> twl6040_can_write_to_chip
Matches more precisely of the functionality.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19 18:37:06 +00:00
Lars-Peter Clausen
290c348ee5 ASoC: twl6040: Use virtual DAPM mixer controls
By using the new virtual DAPM mixer controls it is possible to remove the
twl6040 specific implementation of virtual controls.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-07 11:47:20 +01:00
Sachin Kamat
bf55141303 ASoC: twl6040: Remove redundant semicolon
Redundant semicolon removed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:47:56 +01:00
Mark Brown
b7e8bbf29d Merge remote-tracking branch 'asoc/topic/twl6040' into asoc-next 2013-08-22 14:28:54 +01:00
Lars-Peter Clausen
eee5d7f99a ASoC: dapm: Add a helper to get the CODEC for DAPM kcontrol
We use the same 3 lines to get the CODEC for a kcontrol in a quite a few places.
This patch puts them into a common helper function. Having this encapsulated in
a helper function will also make it more easier to eventually change the data
layout of the kcontrol's private data.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:40:59 +01:00
Mark Brown
a06e427d08 ASoC: twl6040: Use power efficient workqueue
The accessory detect debounce work is not performance sensitive so let
the scheduler run it wherever is most efficient rather than in a per CPU
workqueue by using the system power efficient workqueue.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2013-07-22 10:37:51 +01:00
Peter Ujfalusi
98c5fb1f87 ASoC: twl6040: Add digital mute support
To reduce pop noise during playback stream start and stop the codec needs
to have the digital_mute callback implemented.
The codec need to be muted before the CPU dai has been stopped (McPDM).
Stopping the McPDM will generate a pop on the codec since no signal on the
PDM bus means full negative amplitude.
By managing the mute/unmute state of the outputs we can decrease the amount
of pop noise when playback starts or stops.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24 16:06:03 +01:00
Peter Ujfalusi
68897497aa ASoC: twl6040: Assign id for each DAI
Later we can identify the DAIs by this ID number.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24 16:06:02 +01:00
Peter Ujfalusi
f60596d61f ASoC: twl6040: Drop using devm_request_threaded_irq()
We need to free the irq at twl6040_remove() which is called when the machine
driver has been removed (the card has been removed).
If we fail to do that, next time when the machine driver is loaded the
codec's probe will fail since the irq has been already requested.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24 16:05:47 +01:00
Peter Ujfalusi
85becda62c ASoC: twl6040: Remove leftover code from hs/hf ramp implementation
The code to do the ramp has been removed a long time ago. Remove the
remaining code as well since this is not needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:55:12 +00:00
Peter Ujfalusi
da2107d1e4 ASoC: twl6040: Switch to use system workqueue for jack reporting
There's no need to create a queue for this anymore

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:57 +00:00
Peter Ujfalusi
9523fcdcc0 ASoC: twl6040: Convert to use devm_* when possible
In this way we can clean up the probe and remove paths

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:57 +00:00
Peter Ujfalusi
156db9f3bb ASoC: twl6040: Only set the bias_level once in twl6040_resume()
No need to set the bias_level twice to _STANDBY - since this is the only
state the device could be at suspend time. The driver do not support
idle_bias_off yet.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:57 +00:00
Misael Lopez Cruz
8d61f4901f ASoC: twl6040: Convert PLUGINT to no-suspend irq
Convert headset PLUGINT interrupt to NO_SUSPEND type in order to
allow handling of insertion/removal events while device is suspended.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:47 +00:00
Bill Pemberton
7a79e94e97 ASoC: codecs: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 00:31:51 +09:00
Peter Ujfalusi
07ac2296fb ASoC: twl6040: Fix Stream DAPM mapping
Fixes commit: 805238b ASoC: twl6040: Convert to use DAI DAPM widgets
where the connection between the stream widgets and the ADC widgets was
reversed and because of this on capture the DAPM is not powering up the
codec.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-04 18:42:40 +01:00
Peter Ujfalusi
805238b1b7 ASoC: twl6040: Convert to use DAI DAPM widgets
Use DAPM mapping for stream events and give unique names for the streams.
This change also fixes the following warning:
twl6040-codec twl6040-codec: Failed to create Capture debugfs file

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22 10:57:41 -04:00
Linus Torvalds
3e701cdfe6 MFD bits for the 3.6 merge window.
We have support for a few new drivers:
 - Samsung s2mps11
 - Wolfson Microelectronics wm5102 and wm5110
 - Marvell 88PM800 and 88PM805
 - TI twl6041
 
 We also have our regular driver improvements:
 - Device tree and IRQ domain support for STE AB8500
 - Regmap and devm_* API conversion for TI tps6586x
 - Device tree support for Samsung max77686
 - devm_* API conversion for STE AB3100
 
 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
 tps65090, da9052 and twl-core.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG
 lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e
 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz
 aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8
 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++
 RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux
 A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX
 nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h
 hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH
 XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A
 OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei
 jNEz1H6hu7ToNLfs0UzP
 =c28c
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD bits from Samuel Ortiz:
 "We have support for a few new drivers:
   - Samsung s2mps11
   - Wolfson Microelectronics wm5102 and wm5110
   - Marvell 88PM800 and 88PM805
   - TI twl6041

  We also have our regular driver improvements:
   - Device tree and IRQ domain support for STE AB8500
   - Regmap and devm_* API conversion for TI tps6586x
   - Device tree support for Samsung max77686
   - devm_* API conversion for STE AB3100

  Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
  tps65090, da9052 and twl-core."

Fix up mostly trivial conflicts, with the exception of
drivers/usb/host/ehci-omap.c in particular, which had some
re-organization of the reset sequence (commit 1a49e2ac96: "EHCI:
centralize controller initialization") that clashed with commit
2761a63945 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix
issues").

In particular, commit 2761a63945 moved the usb_add_hcd() to the
*middle* of the reset sequence, which clashes fairly badly with the
reset sequence re-organization (although it could have been done inside
the new omap_ehci_init() function).

I left that part of commit 2761a63945 just undone.

* tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits)
  mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core
  mfd: Arizone core should select MFD_CORE
  mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ
  mfd: Add debug trace on entering and leaving arizone runtime suspend
  mfd: Correct tps65090 cell names
  mfd: Remove gpio support from tps6586x core driver
  ARM: tegra: defconfig: Enable tps6586x gpio
  gpio: tps6586x: Add gpio support through platform driver
  mfd: Cache tps6586x register through regmap
  mfd: Use regmap for tps6586x register access.
  mfd: Use devm managed resources for tps6586x
  input: Add onkey support for 88PM80X PMIC
  mfd: Add support for twl6041
  mfd: Fix twl6040 revision information
  mfd: Matches should be NULL when populate anatop child devices
  input: ab8500-ponkey: Create AB8500 domain IRQ mapping
  mfd: Add missing out of memory check for pcf50633
  Documentation: Describe the AB8500 Device Tree bindings
  mfd: Add tps65910 32-kHz-crystal-input init
  mfd: Drop modifying mc13xxx driver's id_table in probe
  ...
2012-07-30 12:41:17 -07:00
Peter Ujfalusi
be4ac00ac4 mfd: Fix twl6040 revision information
twl6040 ES1.1 and ES1.2 have the same revid (0x01).
ES1.3 of twl6040 REVID is 0x02.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-25 00:26:58 +02:00
Simon Wilson
3e4536546b ASoC: twl6040: fix spelling mistake
Fix spelling mistake in "High-Performance" option of twl6040 power mode.

Signed-off-by: Simon Wilson <simonwilson@google.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 19:06:50 +01:00
Mark Brown
dc2af52c0d Linux 3.4-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPrxCRAAoJEHm+PkMAQRiGQAgH/icr6rDF/e7Y7LoNErjVag94
 +PUhYx851xH3ApPlB1fBaU1ZTvQS2Pb34B8G8WrqWJ+yTs4XfE9sCPj2yb+7ySA8
 vb0vPsErVvAcRWv8sP22NF2ERKNFj/PtSNAcAUJHb5djrRmJcZJ3aw03cdY/INAS
 2OqJEoMc2IBa5Z+WePQJ8N+J2YgDSDdCnpBKNuSHDGN0rBm4suiWY8PWXgTzMAhG
 TNgNrKIlN8bnaX4hPJr6ooN+sxInkUl8ZglAPxwwjVtmYvGch4FiowpDC7BQbSGB
 WFSVsIuv3jMI6VaYDo/NQOFDQqqoK4h7DmBIqbL5eXBRTJg9xW+1A8zloGd4Rks=
 =IWBQ
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc7' into for-3.5

Linux 3.4-rc7

Conflicts):
	drivers/base/regmap/regmap.c         (overlap with bug fixes)
	sound/soc/blackfin/bf5xx-ssm2602.c   (overlap with bug fixes)
2012-05-13 13:32:54 +01:00
Peter Ujfalusi
3bb8a819c6 ASoC: twl6040: Remove HS/HF gain ramp feature
None of the machines uses the gain ramp possibility for HS/HF.
This code path is mostly unused and it does not reduces the pop
noise on the output (it alters it to sound a bit different).
The preferred method to reduce pop noise is to use ABE.
Remove the gain ramp, and related features form the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-07 18:27:36 +01:00
Peter Ujfalusi
8eaeb93933 mfd: Convert twl6040 to i2c driver, and separate it from twl core
Complete the separation of the twl6040 from the twl core since
it is a separate chip, not part of the twl6030 PMIC.

Make the needed Kconfig changes for the depending drivers at the
same time to avoid breaking the kernel build (vibra, ASoC components).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 16:45:34 +02:00
Mark Brown
e6968a1719 ASoC: codecs: Remove rtd->codec usage from CODEC drivers
In order to support CODEC<->CODEC links remove the assumption that there
is only a single CODEC on a DAI link by removing the use of the CODEC
pointer in the rtd from the CODEC drivers. They are already being passed
their DAI whenever they are passed an rtd and can get the CODEC from
there.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04 15:59:12 +01:00
Takashi Iwai
650d6e25cd This has been a very active release for ASoC, as well as the usual raft
of bugfixes and driver updates there's quite a few framework enhancements.
 Most are either small or are laying the groundwork for user visible
 features (especially dynamic PCM), the most directly visible change is
 the dmaengine library.  There's also a bunch of regmap API enhancements
 pulled into the tree so that either the framework or drivers can take
 advantage of the new features.
 
 Changes include:
 
 - Support for widgets not associated with a CODEC, an important part of
   the dynamic PCM framework.
 
 - A library factoring out the common code shared by dmaengine based DMA
   drivers contributed by Lars-Peter Clausen.  This will save a lot of
   code and make it much easier to deploy enhancements to dmaengine.
 
 - Support for binary controls, used for providing runtime configuration
   of algorithm coefficients.
 
 - A new DAPM widget type for regulator supplies allowing drivers for
   devices that can power down unused supplies while active to do without
   any per-driver code.
 
 - DAPM widgets for DAIs, initially giving a speed boost for playback
   startup and shutdown and also the basis for CODEC<->CODEC DAI link
   support.
 
 - Support for specifying the number of significant bits on audio
   interfaces, useful for allowing applications to know how much effort to
   put into generating data for a larger sample format.
 
 - Conversion of the FSI driver used on some SH processors to DMAEngine.
 
 - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPU4IOAAoJEBus8iNuMP3de34P/2aEhzOwxZE3DviqSR6qIag0
 exdEqMVUzoRoAJ5NHVFd4qClqUv7k6TxiDKdcIVXXjVm4L2imF5iqkB5VPK4dJSy
 YMYOIBtruHzTsUmjnJzbTc4GSk3lJ/GfYDPvrNslFBywkNy+uAoNRGQQN1wywgA0
 OJhbCoGfgtT+ULKLg9ke5ckHtdgkSFQNpGjb7IuGy+9JDH72CUiSbZzffxRGFR4X
 Ah2/5VuDqXj56ENfp011K7uMRTv2i57+388JAW7kGR/D5TBs3mTD5AkyJUvGYxVY
 bzfUyNoOek7X22mCSZEuP3W/rtyyuAaaA67yBbC1jTKpbACEriSVBauIApHPvUB5
 a9mz03V2knEcrCVgoyt0yMnvWh2UcWtH3BlaGZhlUrmrMvAEYKCW7xYRMScBvlDA
 NPUPBuf6MCMaKbpu+PnuyhTr4TVjkZqHSmotOMgiP5IUzzdlHzAgUSbnU/DQiNV0
 jS6u9+rkc8j9wRVkBXuzaj1uJ6iSI1T3ElS3WrpsMV33/HBqJLHY9LyWyxhBF3Su
 S4dGeo+I6zljrkZeAU4aNHWXRciv37TMNGNVYVs0xZajtLllgpp3IHrOCPzJtoXF
 tJwmXiZUdAo+3QQci0aH4p2Mem2RH2lLOrxKkKD65CqvNC6mCWC3Dc13B+kiZ/Qn
 9GVK/O9CRuwMcBdVsUy9
 =FpJH
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc

This has been a very active release for ASoC, as well as the usual raft
of bugfixes and driver updates there's quite a few framework enhancements.
Most are either small or are laying the groundwork for user visible
features (especially dynamic PCM), the most directly visible change is
the dmaengine library.  There's also a bunch of regmap API enhancements
pulled into the tree so that either the framework or drivers can take
advantage of the new features.

Changes include:

- Support for widgets not associated with a CODEC, an important part of
  the dynamic PCM framework.

- A library factoring out the common code shared by dmaengine based DMA
  drivers contributed by Lars-Peter Clausen.  This will save a lot of
  code and make it much easier to deploy enhancements to dmaengine.

- Support for binary controls, used for providing runtime configuration
  of algorithm coefficients.

- A new DAPM widget type for regulator supplies allowing drivers for
  devices that can power down unused supplies while active to do without
  any per-driver code.

- DAPM widgets for DAIs, initially giving a speed boost for playback
  startup and shutdown and also the basis for CODEC<->CODEC DAI link
  support.

- Support for specifying the number of significant bits on audio
  interfaces, useful for allowing applications to know how much effort to
  put into generating data for a larger sample format.

- Conversion of the FSI driver used on some SH processors to DMAEngine.

- New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
2012-03-05 15:07:33 +01:00
Mark Brown
a5d3a21a9a ASoC: twl6040: Move ignore_pmdown_time to driver struct
It's set unconditionally.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2012-02-09 10:43:10 +00:00
Peter Ujfalusi
778cee7afd ASoC: twl6040: Convert MICBIAS to SUPPLY widget
In order to avoid breakage change the omap-abe-twl6040
machine driver's routing.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26 15:40:43 +02:00
Liam Girdwood
08656910bb ASoC: twl6040 - add method to query HS DC offset step size in mV
Provide a method for mach drivers to query the HS DC offset step size in mV.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20 13:58:26 +00:00
Liam Girdwood
e48b46ba16 ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
The DL1 PDM interface adds a little gain depending on the output device.
Add a method to retrieve the gain value for machine driver usage.

Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-01-11 12:43:24 +00:00
Lars-Peter Clausen
84b315ee89 ASoC: Drop unused state parameter from CODEC suspend callback
The existence of this parameter is purely historical. None of the CODEC drivers
uses it and we always pass in the same value anyway, so it should be safe to
remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02 10:32:03 +00:00
Mark Brown
5bbcc3c0d0 ASoC: Convert CODEC drivers to module_platform_driver
Factors out a bit of boilerplate.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28 11:33:29 +00:00