Now that there is no overwrap between symbols from ELF files and
ones from Module.symvers.
So, the 'exported twice' warning should be reported irrespective
of where the symbol in question came from.
The exceptional case is external module; in some cases, we build
an external module to provide a different version/variant of the
corresponding in-kernel module, overriding the same set of exported
symbols.
You can see this use-case in upstream; tools/testing/nvdimm/libnvdimm.ko
replaces drivers/nvdimm/libnvdimm.ko in order to link it against mocked
version of core kernel symbols.
So, let's relax the 'exported twice' warning when building external
modules. The multiple export from external modules is warned only
when the previous one is from vmlinux or itself.
With this refactoring, the ugly preloading goes away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is complicated to add mocked-up symbols for pre-handling CRC.
Handle CRC after all the export symbols in the relevant module
are registered.
Call handle_modversion() after the handle_symbol() iteration.
In some cases, I see atand-alone __crc_* without __ksymtab_*.
For example, ARCH=arm allyesconfig produces __crc_ccitt_veneer and
__crc_itu_t_veneer. I guess they come from crc_ccitt, crc_itu_t,
respectively. Since __*_veneer are auto-generated symbols, just
ignore them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This function handles not only modversions, but also unresolved
symbols, export symbols, etc.
Rename it to a more proper function name.
While I was here, I also added the 'const' qualifier to *sym.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, namespace_from_kstrtabns() relies on the fact that
namespace strings are recorded in the __ksymtab_strings section.
Actually, it is coded in include/linux/export.h, but modpost does
not need to hard-code the section name.
Elf_Sym::st_shndx holds the index of the relevant section. Using it is
a more portable way to get the namespace string.
Make namespace_from_kstrtabns() simply call sym_get_data(), and delete
the info->ksymtab_strings .
While I was here, I added more 'const' qualifiers to pointers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When CONFIG_MODULE_REL_CRCS is enabled, the value of __crc_* is not
an absolute value, but the address to the CRC data embedded in the
.rodata section.
Getting the data pointed by the symbol value is somewhat complex.
Split it out into a new helper, sym_get_data().
I will reuse it to refactor namespace_from_kstrtabns() in the next
commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.
It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GNU Make manual says:
$?
The names of all the prerequisites that are newer than the target,
with spaces between them.
To reflect this, rename any-prereq to newer-prereqs, which is clearer
and more intuitive.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The incremental build of Linux kernel is pretty slow when lots of
objects are compiled. The rebuild of allmodconfig may take a few
minutes even when none of the objects needs to be rebuilt.
The time-consuming part in the incremental build is the evaluation of
if_changed* macros since they are used in the recipes to compile C and
assembly source files into objects.
I notice the following code in if_changed* is expensive:
$(filter-out $(PHONY) $(wildcard $^),$^)
In the incremental build, every object has its .*.cmd file, which
contains the auto-generated list of included headers. So, $^ are
expanded into the long list of the source file + included headers,
and $(wildcard $^) checks whether they exist.
It may not be clear why this check exists there.
Here is the record of my research.
[1] The first code addition into Kbuild
This code dates back to 2002. It is the pre-git era. So, I copy-pasted
it from the historical git tree.
| commit 4a6db0791528c220655b063cf13fefc8470dbfee (HEAD)
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Mon Jun 17 00:22:37 2002 -0500
|
| kbuild: Handle removed headers
|
| New and old way to handle dependencies would choke when a file
| #include'd by other files was removed, since the dependency on it was
| still recorded, but since it was gone, make has no idea what to do about
| it (and would complain with "No rule to make <file> ...")
|
| We now add targets for all the previously included files, so make will
| just ignore them if they disappear.
|
| diff --git a/Rules.make b/Rules.make
| index 6ef827d3df39..7db5301ea7db 100644
| --- a/Rules.make
| +++ b/Rules.make
| @@ -446,7 +446,7 @@ if_changed = $(if $(strip $? \
| # execute the command and also postprocess generated .d dependencies
| # file
|
| -if_changed_dep = $(if $(strip $? \
| +if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
| $(filter-out $(cmd_$(1)),$(cmd_$@))\
| $(filter-out $(cmd_$@),$(cmd_$(1)))),\
| @set -e; \
| diff --git a/scripts/fixdep.c b/scripts/fixdep.c
| index b5d7bee8efc7..db45bd1888c0 100644
| --- a/scripts/fixdep.c
| +++ b/scripts/fixdep.c
| @@ -292,7 +292,7 @@ void parse_dep_file(void *map, size_t len)
| exit(1);
| }
| memcpy(s, m, p-m); s[p-m] = 0;
| - printf("%s: \\\n", target);
| + printf("deps_%s := \\\n", target);
| m = p+1;
|
| clear_config();
| @@ -314,7 +314,8 @@ void parse_dep_file(void *map, size_t len)
| }
| m = p + 1;
| }
| - printf("\n");
| + printf("\n%s: $(deps_%s)\n\n", target, target);
| + printf("$(deps_%s):\n", target);
| }
|
| void print_deps(void)
The "No rule to make <file> ..." error can be solved by passing -MP to
the compiler, but I think the detection of header removal is a good
feature. When a header is removed, all source files that previously
included it should be re-compiled. This makes sure we has correctly
got rid of #include directives of it.
This is also related with the behavior of $?. The GNU Make manual says:
$?
The names of all the prerequisites that are newer than the target,
with spaces between them.
This does not explain whether a non-existent prerequisite is considered
to be newer than the target.
At this point of time, GNU Make 3.7x was used, where the $? did not
include non-existent prerequisites. Therefore,
$(filter-out FORCE $(wildcard $^),$^)
was useful to detect the header removal, and to rebuild the related
objects if it is the case.
[2] Change of $? behavior
Later, the behavior of $? was changed (fixed) to include prerequisites
that did not exist.
First, GNU Make commit 64e16d6c00a5 ("Various changes getting ready for
the release of 3.81.") changed it, but in the release test of 3.81, it
turned out to break the kernel build.
See these:
- http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html
- https://savannah.gnu.org/bugs/?16002
- https://savannah.gnu.org/bugs/?16051
Then, GNU Make commit 6d8d9b74d9c5 ("Numerous updates to tests for
issues found on Cygwin and Windows.") reverted it for the 3.81 release
to give Linux kernel time to adjust to the new behavior.
After the 3.81 release, GNU Make commit 7595f38f62af ("Fixed a number
of documentation bugs, plus some build/install issues:") re-added it.
[3] Adjustment to the new $? behavior on Kbuild side
Meanwhile, the kernel build was changed by commit 4f1933620f ("kbuild:
change kbuild to not rely on incorrect GNU make behavior") to adjust to
the new $? behavior.
[4] GNU Make 3.82 released in 2010
GNU Make 3.82 was the first release that integrated the correct $?
behavior. At this point, Kbuild dealt with GNU Make versions with
different $? behaviors.
3.81 or older:
$? does not contain any non-existent prerequisite.
$(filter-out $(PHONY) $(wildcard $^),$^) was useful to detect
removed include headers.
3.82 or newer:
$? contains non-existent prerequisites. When a header is removed,
it appears in $?. $(filter-out $(PHONY) $(wildcard $^),$^) became
a redundant check.
With the correct $? behavior, we could have dropped the expensive
check for 3.82 or later, but we did not. (Maybe nobody noticed this
optimization.)
[5] The .SECONDARY special target trips up $?
Some time later, I noticed $? did not work as expected under some
circumstances. As above, $? should contain non-existent prerequisites,
but the ones specified as SECONDARY do not appear in $?.
I asked this in GNU Make ML, and it seems a bug:
https://lists.gnu.org/archive/html/bug-make/2019-01/msg00001.html
Since commit 8e9b61b293 ("kbuild: move .SECONDARY special target to
Kbuild.include"), all files, including headers listed in .*.cmd files,
are treated as secondary.
So, we are back into the incorrect $? behavior.
If we Kbuild want to react to the header removal, we need to keep
$(filter-out $(PHONY) $(wildcard $^),$^) but this makes the rebuild
so slow.
[Summary]
- I believe noticing the header removal and recompiling related objects
is a nice feature for the build system.
- If $? worked correctly, $(filter-out $(PHONY),$?) would be enough
to detect the header removal.
- Currently, $? does not work correctly when used with .SECONDARY,
and Kbuild is hit by this bug.
- I filed a bug report for this, but not fixed yet as of writing.
- Currently, the header removal is detected by the following expensive
code:
$(filter-out $(PHONY) $(wildcard $^),$^)
- I do not want to revert commit 8e9b61b293 ("kbuild: move
.SECONDARY special target to Kbuild.include"). Specifying
.SECONDARY globally is clean, and it matches to the Kbuild policy.
This commit proactively removes the expensive check since it makes the
incremental build faster. A downside is Kbuild will no longer be able
to notice the header removal.
You can confirm it by the full-build followed by a header removal, and
then re-build.
$ make defconfig all
[ full build ]
$ rm include/linux/device.h
$ make
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
CHK include/generated/compile.h
Kernel: arch/x86/boot/bzImage is ready (#11)
Building modules, stage 2.
MODPOST 12 modules
Previously, Kbuild noticed a missing header and emits a build error.
Now, Kbuild is fine with it. This is an unusual corner-case, not a big
deal. Once the $? bug is fixed in GNU Make, everything will work fine.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The local variable, ns_entry, is unneeded.
While I was here, I also cleaned up the comparison with NULL or 0.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
scripts/nsdeps is written to take care of only in-tree modules.
Perhaps, this is not a bug, but just a design. At least,
Documentation/core-api/symbol-namespaces.rst focuses on in-tree modules.
Having said that, some people already tried nsdeps for external modules.
So, it would be nice to support it.
Reported-by: Steve French <smfrench@gmail.com>
Reported-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
The modpost, with the -d option given, generates per-module .ns_deps
files.
Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.
On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.
This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:
<module_name>: <list of missing namespaces>
Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.
This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.
This also solves the stale .ns_deps problem reported by Jessica Yu:
https://lkml.org/lkml/2019/10/28/467
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
'make nsdeps' invokes the modpost three times at most; before linking
vmlinux, before building modules, and finally for generating .ns_deps
files. Running the modpost again and again is not efficient.
The last two can be unified. When the -d option is given, the modpost
still does the usual job, and in addition, generates .ns_deps files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
If ncurses is installed, but at a non-default location, the previous
error message was not helpful in resolving the situation. Now it will
suggest that pkg-config might need to be installed in addition to
ncurses.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
make listnewconfig will list the individual options that need to be set.
This is useful but there's no easy way to get the help text associated
with the options at the same time. Introduce a new targe
'make helpnewconfig' which lists the full help text of all the
new options as well. This makes it easier to automatically generate
changes that are easy for humans to review. This command also adds
markers between each option for easier parsing.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add a 'dir-pkg' target which just creates the same directory structures
as in tar-pkg, but doesn't package anything.
Useful when the user wants to copy the kernel tree on a machine using
ssh, rsync or whatever.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some "make help" text lines extend beyond 80 characters.
Wrap them before an opening parenthesis, or before 80 characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 394053f4a4 ("kbuild: make single targets work more
correctly"), building single targets is really slow.
Speed it up by not descending into unrelated directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
KBUILD_SINGLE_TARGETS does not need to contain all the targets.
Change it to keep track the targets only from the current directory
and its subdirectories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 040fcc819a ("kbuild: improved modversioning support for
external modules"), the external module build reads Module.symvers in
the directory of the module itself, then dumps symbols back into it.
It accumulates stale symbols in the file when you build an external
module incrementally.
The idea behind it was, as the commit log explained, you can copy
Modules.symvers from one module to another when you need to pass symbol
information between two modules. However, the manual copy of the file
sounds questionable to me, and containing stale symbols is a downside.
Some time later, commit 0d96fb20b7 ("kbuild: Add new Kbuild variable
KBUILD_EXTRA_SYMBOLS") introduced a saner approach.
So, this commit removes the former one. Going forward, the external
module build dumps symbols into Module.symvers to be carried via
KBUILD_EXTRA_SYMBOLS, but never reads it automatically.
With the -I option removed, there is no one to set the external_module
flag unless KBUILD_EXTRA_SYMBOLS is passed. Now the -i option does it
instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building external modules, $(objtree)/Module.symvers is scanned
for symbol information of vmlinux and in-tree modules.
Additionally, vmlinux is parsed if it exists in $(objtree)/.
This is totally redundant since all the necessary information is
contained in $(objtree)/Module.symvers.
Do not parse vmlinux at all for external module builds. This makes
sense because vmlinux is deleted by 'make clean'.
'make clean' leaves all the build artifacts for building external
modules. vmlinux is unneeded for that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The comment line "When building external modules ..." explains
the same thing as "Include the module's Makefile ..." a few lines
below.
The comment "they may be used when building the .mod.c file" is no
longer true; .mod.c file is compiled in scripts/Makefile.modfinal
since commit 9b9a3f20cb ("kbuild: split final module linking out
into Makefile.modfinal"). I still keep the code in case $(obj) or
$(src) is used in the external module Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
util.c exists both in scripts/kconfig/ and scripts/kconfig/lxdialog.
Prior to commit 54b8ae66ae ("kbuild: change *FLAGS_<basetarget>.o
to take the path relative to $(obj)"), Kbuild could not pass different
flags to source files with the same basename. Now that this issue
was solved, you can split util.c out of parser.y and compile them
independently of each other.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This tool is only used by drivers/video/logo/Makefile. No reason to
keep it in scripts/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Fix `make nsdeps` for modules composed of multiple source files. Since
$mod_source_files is not in quotes in the call to generate_deps_for_ns(), not
all the source files for a module were being passed to spatch.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9XXQ
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix `make nsdeps` for modules composed of multiple source files.
Since $mod_source_files was not in quotes in the call to
generate_deps_for_ns(), not all the source files for a module were
being passed to spatch"
* tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: make sure to pass all module source files to spatch
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The nsdeps script passes a list of the module source files to
generate_deps_for_ns() as a space delimited string named $mod_source_files,
which then passes it to spatch. But since $mod_source_files is not encased
in quotes, each source file in that string is treated as a separate shell
function argument (as $2, $3, $4, etc.). However, the spatch invocation
only refers to $2, so only the first file out of $mod_source_files is
processed by spatch.
This causes problems (namely, the MODULE_IMPORT_NS() statement doesn't
get inserted) when a module is composed of many source files and the
"main" module file containing the MODULE_LICENSE() statement is not the
first file listed in $mod_source_files. Fix this by encasing
$mod_source_files in quotes so that the entirety of the string is
treated as a single argument and can be referred to as $2.
In addition, put quotes in the variable assignment of mod_source_files
to prevent any shell interpretation and field splitting.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod. Instead,
have modpost extract a symbol's namespace from __kstrtabns and
__ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused by
unescaped '/'. Use a different sed delimiter to avoid this problem.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ge3Z
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fixes from Jessica Yu:
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod.
Instead, have modpost extract a symbol's namespace from __kstrtabns
and __ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused
by unescaped '/'.
Use a different sed delimiter to avoid this problem.
* tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: use alternative sed delimiter
symbol namespaces: revert to previous __ksymtab name scheme
modpost: make updating the symbol namespace explicit
modpost: delegate updating namespaces to separate function
When doing an out of tree build with O=, the nsdeps script constructs
the absolute pathname of the module source file so that it can insert
MODULE_IMPORT_NS statements in the right place. However, ${srctree}
contains an unescaped path to the source tree, which, when used in a sed
substitution, makes sed complain:
++ sed 's/[^ ]* *//home/jeyu/jeyu-linux\/&/g'
sed: -e expression #1, char 12: unknown option to `s'
The sed substitution command 's' ends prematurely with the forward
slashes in the pathname, and sed errors out when it encounters the 'h',
which is an invalid sed substitution option. To avoid escaping forward
slashes ${srctree}, we can use '|' as an alternative delimiter for
sed instead to avoid this error.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
-----BEGIN PGP SIGNATURE-----
iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl2sh9MeHHlhbWFkYS5t
YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGO90P/13dNgaibb3JcCvp
+ugn+o26V+aqZ8uDLPPifUNFLLnDfGmgORAOe0Z2mGI2CqMDaWMYjvyZNF1KzOdD
+WFZubiTUevYyM9AOG6O6EOGEDRumgvdNhnJIP+aCUNKGM50zzhuAa23y6Xip1NZ
qJY5AYu9KiH9jTXtZAdGReuMdvNRsMZuvmI4Qnc21utItVxDFEQKGdTlRoJaGEdN
Zc/f1HzWwlr7VWZiy0iMRSCAAtAA3TN3S1bw5QCYsuJb3LRl2EIOKMeSinRTYWRc
zU5CHrkRSX4/M/o8VantTOZueuGMfbaOAl1KEDh8DUPDcrl+gmL4s8aFuDW+5d2+
7pPlEe/FNZOAGVBDgiK59N3bl2Rn/Uyg9VGwFc8PU3VeY5VbS97ayBaLFcua2zwX
88mtsZoq+fN3qsq8gfbb21qauTbEibyrk8lzjHoQl07TW82GFWG/GXSt9dQAm1sb
w/M15WdaONKOzkYXGGCo0l6vdXx1+qqV/LZQcaWhfcoeU5YVVEmSRwCakCxxSWUE
rvWtn0vljgH8kyb0gnUP6qLJC9clwMv58sl/mG65/D7zs9B74g16BkX0tU8vLSpr
Ww1BpGtPwuFPp7+kEzWemtlulhDvow2xIX7bNIkAk1IIVpyCmU98AKpivR7G9Cvt
4cZPSGRU+s2ou/hrtjryzvmwhGUG
=KNWF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: substituting --sort in archive creation
scripts: setlocalversion: fix a bashism
kbuild: update comment about KBUILD_ALLDIRS
Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:
+------+ <- module->core_layout->base
| GOT |
+------+ <- module->core_layout->base + module->arch->plt_offset
| PLT |
+------+ <- module->core_layout->base + module->arch->plt_offset +
| TEXT | module->arch->plt_size
+------+
Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.
Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().
Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id. This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.
This fixes following error:
(gdb) lx-dmesg
Python Exception <class 'ValueError'> embedded null character:
Error occurred in Python command: embedded null character
The read_u* utility functions now take an offset argument to make them
easier to use.
Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The introduction of Symbol Namespaces changed the naming schema of the
__ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol.
That caused some breakages in tools that depend on the name layout in
either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod
would not be able to read System.map without a patch to support symbol
namespaces. A warning reported by depmod for namespaced symbols would
look like
depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks
In order to address this issue, revert to the original naming scheme and
rather read the __kstrtabns_<symbol> entries and their corresponding
values from __ksymtab_strings to update the namespace values for
symbols. After having read all symbols and handled them in
handle_modversions(), the symbols are created. In a second pass, read
the __kstrtabns_ entries and update the namespaces accordingly.
Fixes: 8651ec01da ("module: add support for symbol namespaces.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Setting the symbol namespace of a symbol within sym_add_exported feels
displaced and lead to issues in the current implementation of symbol
namespaces. This patch makes updating the namespace an explicit call to
decouple it from adding a symbol to the export list.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Let the function 'sym_update_namespace' take care of updating the
namespace for a symbol. While this currently only replaces one single
location where namespaces are updated, in a following patch, this
function will get more call sites.
The function signature is intentionally close to sym_update_crc and
taking the name by char* seems like unnecessary work as the symbol has
to be looked up again. In a later patch of this series, this concern
will be addressed.
This function ensures that symbol::namespace is either NULL or has a
valid non-empty value. Previously, the empty string was considered 'no
namespace' as well and this lead to confusion.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:
https://lore.kernel.org/lkml/9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/
Remove the script to reduce the spam.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix bashism reported by checkbashisms by using only one '=':
possible bashism in scripts/setlocalversion line 96 (should be 'b = a'):
if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then
Fixes: 38b3439d84 ("setlocalversion: update mercurial tag parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Crowe <mcrowe@zipitwireless.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Removed locked down from tracefs itself and moved it to the trace
directory. Having the open functions there do the lockdown checks.
- Fixed a few races with opening an instance file and the instance being
deleted (Discovered during the locked down updates). Kept separate
from the clean up code such that they can be backported to stable
easier.
- Cleaned up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fixed a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXaNhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quDIAP4v08ARNdIh+r+c4AOBm3xsOuE/d9GB
I56ydnskm+x2JQD6Ap9ivXe9yDBIErFeHNtCoq7pM8YDI4YoYIB30N0GfwM=
=7oAu
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:
- Remove lockdown from tracefs itself and moved it to the trace
directory. Have the open functions there do the lockdown checks.
- Fix a few races with opening an instance file and the instance
being deleted (Discovered during the lockdown updates). Kept
separate from the clean up code such that they can be backported to
stable easier.
- Clean up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fix a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq"
* tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
The removal of the longjmp code in recordmcount.c mistakenly made the return
of make_nop() being negative an exit of nop_mcount(). It should not exit the
routine, but instead just not process that part of the code. By exiting with
an error code, it would cause the update of recordmcount to fail some files
which would fail the build if ftrace function tracing was enabled.
Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.home
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3f1df12019 ("recordmcount: Rewrite error/success handling")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Fix broken external module builds due to a modpost bug in read_dump(),
where the namespace was not being strdup'd and sym->namespace would be
set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ebck
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
scripts/nsdeps automatically generates a patch to add MODULE_IMPORT_NS
tags, and what is nicer, it sorts the lines alphabetically with the
'sort' command. However, the output from the 'sort' command depends on
locale.
For example, I got this:
$ { echo usbstorage; echo usb_storage; } | LANG=en_US.UTF-8 sort
usbstorage
usb_storage
$ { echo usbstorage; echo usb_storage; } | LANG=C sort
usb_storage
usbstorage
So, this means people might potentially send different patches.
This kind of issue was reported in the past, for example,
commit f55f2328bb ("kbuild: make sorting initramfs contents
independent of locale").
Adding 'LANG=C' is a conventional way of fixing when a deterministic
result is desirable.
I added 'LANG=C' very close to the 'sort' command since changing
locale affects the language of error messages etc. We should respect
users' choice as much as possible.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
This script does not use bash-extension. I am guessing this hashbang
was copied from scripts/coccicheck, which really uses bash-extension.
/bin/sh is enough for this script.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Currently, external module builds produce tons of false-positives:
WARNING: module <mod> uses symbol <sym> from namespace <ns>, but does not import it.
Here, the <ns> part shows a random string.
When you build external modules, the symbol info of vmlinux and
in-kernel modules are read from $(objtree)/Module.symvers, but
read_dump() is buggy in multiple ways:
[1] When the modpost is run for vmlinux and in-kernel modules,
sym_extract_namespace() allocates memory for the namespace. On the
other hand, read_dump() does not, then sym->namespace will point to
somewhere in the line buffer of get_next_line(). The data in the
buffer will be replaced soon, and sym->namespace will end up with
pointing to unrelated data. As a result, check_exports() will show
random strings in the warning messages.
[2] When there is no namespace, sym_extract_namespace() returns NULL.
On the other hand, read_dump() sets namespace to an empty string "".
(but, it will be later replaced with unrelated data due to bug [1].)
The check_exports() shows a warning unless exp->namespace is NULL,
so every symbol read from read_dump() emits the warning, which is
mostly false positive.
To address [1], sym_add_exported() calls strdup() for s->namespace.
The namespace from sym_extract_namespace() must be freed to avoid
memory leak.
For [2], I changed the if-conditional in check_exports().
This commit also fixes sym_add_exported() to set s->namespace correctly
when the symbol is preloaded.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Currently, EXPORT_SYMBOL_NS(_GPL) constructs the kernel symbol as
follows:
__ksymtab_SYMBOL.NAMESPACE
The sym_extract_namespace() in modpost allocates memory for the part
SYMBOL.NAMESPACE when '.' is contained. One problem is that the pointer
returned by strdup() is lost because the symbol name will be copied to
malloc'ed memory by alloc_symbol(). No one will keep track of the
pointer of strdup'ed memory.
sym->namespace still points to the NAMESPACE part. So, you can free it
with complicated code like this:
free(sym->namespace - strlen(sym->name) - 1);
It complicates memory free.
To fix it elegantly, I swapped the order of the symbol and the
namespace as follows:
__ksymtab_NAMESPACE.SYMBOL
then, simplified sym_extract_namespace() so that it allocates memory
only for the NAMESPACE part.
I prefer this order because it is intuitive and also matches to major
languages. For example, NAMESPACE::NAME in C++, MODULE.NAME in Python.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Now all scripts in scripts/coccinelle to be automatically called
by coccicheck. However new adding add_namespace.cocci does not
support report mode, which make coccicheck failed.
This add "virtual report" to make the coccicheck go ahead smoothly.
Fixes: eb8305aecb ("scripts: Coccinelle script for namespace dependencies.")
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Geert Uytterhoeven reports a strange side-effect of commit 858805b336
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.
[Steps to Reproduce]
$ echo bar > localversion
$ mkdir build
$ cd build/
$ echo foo > localversion
$ make -s -f ../Makefile defconfig include/config/kernel.release
$ cat include/config/kernel.release
5.4.0-rc1foofoobar
This comes down to the behavior change of local variables.
The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
When a variable is made local, it inherits the initial value and
exported and readonly flags from the variable with the same name
in the surrounding scope, if there is one. Otherwise, the variable
is initially unset.
[Test Code]
foo ()
{
local res
echo "res: $res"
}
res=1
foo
[Result]
$ sh test.sh
res: 1
$ bash test.sh
res:
So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.
Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.
Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).
Fixes: 858805b336 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.
Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.
This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.
This behavior was changed in 7e1c04779e ("kbuild: Use relative path
for $(objtree)", 2014-05-14)
Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.
Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.
The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.
rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.
Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
