Pull networking fixes and cleanups from David Miller:
1) Use rb_entry() instead of hardcoded container_of(), from Geliang
Tang.
2) Use correct memory barriers in stammac driver, from Pavel Machek.
3) Fix assoc bind address handling in SCTP, from Xin Long.
4) Make the length check for UFO handling consistent between
__ip_append_data() and ip_finish_output(), from Zheng Li.
5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo
Li.
6) Handle devm_ioremap() errors properly in cavium driver, from Arvind
Yadav.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
RDS: use rb_entry()
net_sched: sch_netem: use rb_entry()
net_sched: sch_fq: use rb_entry()
net/mlx5: use rb_entry()
ethernet: sfc: Add Kconfig entry for vendor Solarflare
sctp: not copying duplicate addrs to the assoc's bind address list
sctp: reduce indent level in sctp_copy_local_addr_list
ARM: dts: hix5hd2: don't change the existing compatible string
net: hix5hd2_gmac: fix compatible strings name
openvswitch: Add a missing break statement.
net: netcp: ethss: fix 10gbe host port tx pri map configuration
net: netcp: ethss: fix errors in ethtool ops
fsl/fman: enable compilation on ARM64
fsl/fman: A007273 only applies to PPC SoCs
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
fsl/fman: fix 1G support for QSGMII interfaces
dt: bindings: net: use boolean dt properties for eee broken modes
net: phy: use boolean dt properties for eee broken modes
net: phy: fix sign type error in genphy_config_eee_advert
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
...
Merge final set of updates from Andrew Morton:
- a series to make IMA play better across kexec
- a handful of random fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text
ratelimit: fix WARN_ON_RATELIMIT return value
kcov: make kcov work properly with KASLR enabled
arm64: setup: introduce kaslr_offset()
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
ima: platform-independent hash value
ima: define a canonical binary_runtime_measurements list format
ima: support restoring multiple template formats
ima: store the builtin/custom template definitions in a list
ima: on soft reboot, save the measurement list
powerpc: ima: send the kexec buffer to the next kernel
ima: maintain memory size needed for serializing the measurement list
ima: permit duplicate measurement list entries
ima: on soft reboot, restore the measurement list
powerpc: ima: get the kexec buffer passed by the previous kernel
Pull mailbox updates from Jassi Brar:
- new features (poll and SRAM usage) added to the mailbox-test driver
- major update of Broadcom's PDC controller driver
- minor fix for auto-loading test and STI driver modules
* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: mailbox-test: allow reserved areas in SRAM
mailbox: mailbox-test: add support for fasync/poll
mailbox: bcm-pdc: Remove unnecessary void* casts
mailbox: bcm-pdc: Simplify interrupt handler logic
mailbox: bcm-pdc: Performance improvements
mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors
mailbox: bcm-pdc: Convert from threaded IRQ to tasklet
mailbox: bcm-pdc: Try to improve branch prediction
mailbox: bcm-pdc: streamline rx code
mailbox: bcm-pdc: Convert from interrupts to poll for tx done
mailbox: bcm-pdc: PDC driver leaves debugfs files after removal
mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted
mailbox: bcm-pdc: Use octal permissions rather than symbolic
mailbox: sti: Fix module autoload for OF registration
mailbox: mailbox-test: Fix module autoload
developers, in their wisdom, broke the API in the 0.13 release. This fix
detects the breakage and allows the docs to be built with both the old and
new versions.
-----BEGIN PGP SIGNATURE-----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=h7OP
-----END PGP SIGNATURE-----
Merge tag 'doc-4.10-3' of git://git.lwn.net/linux
Pull documentation fix from Jonathan Corbet:
"A single fix for the build system.
It would appear that the docutils developers, in their wisdom, broke
the API in the 0.13 release. This fix detects the breakage and allows
the docs to be built with both the old and new versions"
* tag 'doc-4.10-3' of git://git.lwn.net/linux:
docs: sphinx-extensions: make rstFlatTable work with docutils 0.13
- Wire-up new syscalls
- Add new codes and fpga families
- Fix return value
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlhZKicACgkQykllyylKDCFe5wCfYFkwbBhSO34IykNdK5m2Iipc
u4EAn3+7AAp4k4nTf92vtQI6VCWw6245
=5PYH
-----END PGP SIGNATURE-----
Merge tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull arch/microblaze updates from Michal Simek:
- wire-up new syscalls
- add new codes and fpga families
- fix a return value
* tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add new fpga families
microblaze: Add missing release version code v9.6 and v10
microblaze: Add missing syscalls
microblaze: Fix return value from xilinx_timer_init
Restructure the timer interrupt function to better cope with missed timer irqs.
Optimize the calculation when the next interrupt should happen and skip irqs if
they would happen too shortly after exit of the irq function.
The update_process_times() call is done anyway at every timer irq, so we can
safely drop the prof_counter and prof_multiplier variables from the per_cpu
structure.
Signed-off-by: Helge Deller <deller@gmx.de>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
5a6681e22c ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
there are two drivers for Solarflare devices, but both still show up
directly beneath "Ethernet driver support" in the Kconfig. Follow the
pattern of other vendors and group them beneath an own vendor Kconfig
entry for Solarflare.
Cc: Edward Cree <ecree@solarflare.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
sctp: fix the issue that may copy duplicate addrs into assoc's bind address list
Patch 1/2 is to fix some indent level.
Given that we have kernels out there with this issue, patch 2/2 also
fix sctp_raw_to_bind_addrs.
v1 -> v2:
Explain why we didn't filter the duplicate addresses when global
address list gets updated in patch 2/2 changelog.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp.local_addr_list is a global address list that is supposed to include
all the local addresses. sctp updates this list according to NETDEV_UP/
NETDEV_DOWN notifications.
However, if multiple NICs have the same address, the global list would
have duplicate addresses. Even if for one NIC, promote secondaries in
__inet_del_ifa can also lead to accumulating duplicate addresses.
When sctp binds address 'ANY' and creates a connection, it copies all
the addresses from global list into asoc's bind addr list, which makes
sctp pack the duplicate addresses into INIT/INIT_ACK packets.
This patch is to filter the duplicate addresses when copying the addrs
from global list in sctp_copy_local_addr_list and unpacking addr_param
from cookie in sctp_raw_to_bind_addrs to asoc's bind addr list.
Note that we can't filter the duplicate addrs when global address list
gets updated, As NETDEV_DOWN event may remove an addr that still exists
in another NIC.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to reduce indent level by using continue when the addr
is not allowed, and also drop end_copy by using break.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New features:
- Introduce 'perf sched timehist --idle', to analyse processes
going to/from idle state (Namhyung Kim)
Fixes:
- Allow 'perf record -u user' to continue when facing races with threads
going away after having scanned them via /proc (Jiri Olsa)
- Fix 'perf mem' --all-user/--all-kernel options (Jiri Olsa)
- Support jumps with multiple arguments (Ravi Bangoria)
- Fix jumps to before the function where they are located (Ravi
Bangoria)
- Fix lock-pi help string (Davidlohr Bueso)
- Fix build of 'perf trace' in odd systems such as a RHEL PPC one (Jiri Olsa)
- Do not overwrite valid build id in 'perf diff' (Kan Liang)
- Don't throw error for zero length symbols, allowing the use of the TUI
in PowerPC, where such symbols became more common recently (Ravi Bangoria)
Infrastructure:
- Switch of samples/bpf/ to use tools/lib/bpf, removing libbpf
duplication (Joe Stringer)
- Move headers check into bash script (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8AGA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20161220' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes:
New features:
- Introduce 'perf sched timehist --idle', to analyse processes
going to/from idle state (Namhyung Kim)
Fixes:
- Allow 'perf record -u user' to continue when facing races with threads
going away after having scanned them via /proc (Jiri Olsa)
- Fix 'perf mem' --all-user/--all-kernel options (Jiri Olsa)
- Support jumps with multiple arguments (Ravi Bangoria)
- Fix jumps to before the function where they are located (Ravi Bangoria)
- Fix lock-pi help string (Davidlohr Bueso)
- Fix build of 'perf trace' in odd systems such as a RHEL PPC one (Jiri Olsa)
- Do not overwrite valid build id in 'perf diff' (Kan Liang)
- Don't throw error for zero length symbols, allowing the use of the TUI
in PowerPC, where such symbols became more common recently (Ravi Bangoria)
Infrastructure changes:
- Switch of samples/bpf/ to use tools/lib/bpf, removing libbpf
duplication (Joe Stringer)
- Move headers check into bash script (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongpo Li says:
====================
net: hix5hd2_gmac: keep the compatible string not changed
This patch series fix the patch:
d0fb6ba75d ("net: hix5hd2_gmac: add generic compatible string")
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change it.
We should only add the generic compatible string "hisi-gmac-v1".
Fixes: 0855950ba5 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names")
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
We also add another SoC compatible string in dt binding documentation
and describe which generic version the SoC belongs to.
Fixes: d0fb6ba75d ("net: hix5hd2_gmac: add generic compatible string")
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a break statement to prevent fall-through from
OVS_KEY_ATTR_ETHERNET to OVS_KEY_ATTR_TUNNEL. Without the break
actions setting ethernet addresses fail to validate with log messages
complaining about invalid tunnel attributes.
Fixes: 0a6410fbde ("openvswitch: netlink: support L3 packets")
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the missing 10gbe host port tx priority map
configurations.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ethtool ops, it needs to retrieve the corresponding
ethss module (gbe or xgbe) from the net_device structure.
Prior to this patch, the retrieving procedure only
checks for the gbe module. This patch fixes the issue
by checking the xgbe module if the net_device structure
does not correspond to the gbe module.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur says:
====================
fsl/fman: fixes for ARM
The patch set fixes advertised speeds for QSGMII interfaces, disables
A007273 erratum workaround on non-PowerPC platforms where it does not
apply, enables compilation on ARM64 and addresses a probing issue on
non PPC platforms.
Changes from v3: removed redundant comment, added ack by Scott
Changes from v2: merged fsl/fman changes to avoid a point of failure
Changes from v1: unifying probing on all supported platforms
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fsl/fman drivers will use of_platform_populate() on all
supported platforms. Call of_platform_populate() to probe the
FMan sub-nodes.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
QSGMII ports were not advertising 1G speed.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jerome Brunet says:
====================
phy: Fix integration of eee-broken-modes
The purpose of this series is to fix the integration of the ethernet phy
property "eee-broken-modes" [0]
The v3 of this series has been merged, missing a fix (error reported by
kbuild robot) available in the v4 [1]
More importantly, Florian opposed adding a DT property mapping a device
register this directly [2]. The concern was that the property could be
abused to implement platform configuration policy. After discussing it,
I think we agreed that such information about the HW (defect) should appear
in the platform DT. However, the preferred way is to add a boolean property
for each EEE broken mode.
[0]: http://lkml.kernel.org/r/1480326409-25419-1-git-send-email-jbrunet@baylibre.com
[1]: http://lkml.kernel.org/r/1480348229-25672-1-git-send-email-jbrunet@baylibre.com
[2]: http://lkml.kernel.org/r/e14a3b0c-dc34-be14-48b3-518a0ad0c080@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is
checked to know if the register could be accessed but the result is
assigned to a 'u32'.
Changing to 'int' to correctly get errors from phy_read_mmd_indirect.
Fixes: d853d145ea ("net: phy: add an option to disable EEE advertisement")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macro is to be used similarly as WARN_ON as:
if (WARN_ON_RATELIMIT(condition, state))
do_something();
One would expect only 'condition' to affect the 'if', but
WARN_ON_RATELIMIT does internally only:
WARN_ON((condition) && __ratelimit(state))
So the 'if' is affected by the ratelimiting state too. Fix this by
returning 'condition' in any case.
Note that nobody uses WARN_ON_RATELIMIT yet, so there is nothing to
worry about. But I was about to use it and was a bit surprised.
Link: http://lkml.kernel.org/r/20161215093224.23126-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When FADV_DONTNEED cannot drop all pages in the range, it observes that
some pages might still be on per-cpu LRU caches after recent
instantiation and so initiates remote calls to all CPUs to flush their
local caches. However, in most cases, the fadvise happens from the same
context that instantiated the pages, and any pre-LRU pages in the
specified range are most likely sitting on the local CPU's LRU cache,
and so in many cases this results in unnecessary remote calls, which, in
a loaded system, can hold up the fadvise() call significantly.
[ I didn't record it in the extreme case we observed at Facebook,
unfortunately. We had a slow-to-respond system and noticed it
lru_add_drain_all() leading the profile during fadvise calls. This
patch came out of thinking about the code and how we commonly call
FADV_DONTNEED.
FWIW, I wrote a silly directory tree walker/searcher that recurses
through /usr to read and FADV_DONTNEED each file it finds. On a 2
socket 40 ht machine, over 1% is spent in lru_add_drain_all(). With
the patch, that cost is gone; the local drain cost shows at 0.09%. ]
Try to avoid the remote call by flushing the local LRU cache before even
attempting to invalidate anything. It's a cheap operation, and the
local LRU cache is the most likely to hold any pre-LRU pages in the
specified fadvise range.
Link: http://lkml.kernel.org/r/20161214210017.GA1465@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For remote attestion it is important for the ima measurement values to
be platform-independent. Therefore integer fields to be hashed must be
converted to canonical format.
Link: http://lkml.kernel.org/r/1480554346-29071-11-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Andreas Steffen <andreas.steffen@strongswan.org>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IMA binary_runtime_measurements list is currently in platform native
format.
To allow restoring a measurement list carried across kexec with a
different endianness than the targeted kernel, this patch defines
little-endian as the canonical format. For big endian systems wanting
to save/restore the measurement list from a system with a different
endianness, a new boot command line parameter named "ima_canonical_fmt"
is defined.
Considerations: use of the "ima_canonical_fmt" boot command line option
will break existing userspace applications on big endian systems
expecting the binary_runtime_measurements list to be in platform native
format.
Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The configured IMA measurement list template format can be replaced at
runtime on the boot command line, including a custom template format.
This patch adds support for restoring a measuremement list containing
multiple builtin/custom template formats.
Link: http://lkml.kernel.org/r/1480554346-29071-9-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The builtin and single custom templates are currently stored in an
array. In preparation for being able to restore a measurement list
containing multiple builtin/custom templates, this patch stores the
builtin and custom templates as a linked list. This will permit
defining more than one custom template per boot.
Link: http://lkml.kernel.org/r/1480554346-29071-8-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and restored on boot.
This patch uses the kexec buffer passing mechanism to pass the
serialized IMA binary_runtime_measurements to the next kernel.
Link: http://lkml.kernel.org/r/1480554346-29071-7-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.
This is the architecture-specific part of setting up the IMA kexec
buffer for the next kernel. It will be used in the next patch.
Link: http://lkml.kernel.org/r/1480554346-29071-6-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
