Commit Graph

52802 Commits

Author SHA1 Message Date
Linus Torvalds
e389f9aec6 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (107 commits)
  smc911x: fix compilation breakage wjen debug is on
  [netdrvr] eexpress: minor corrections
  add NAPI support to sb1250-mac.c
  ixgb: ROUND_UP macro cleanup in drivers/net/ixgb
  e1000: ROUND_UP macro cleanup in drivers/net/e1000
  Generic HDLC sparse annotations
  e100: Optionally use I/O mode only to access register space
  e100: allow bad MAC address when running with invalid eeprom csum
  ehea: fix for dlpar support
  ehea: fix for sysfs entries
  3C509: Remove unnecessary include of <linux/pm_legacy.h>
  NetXen: Fix for vmalloc issues
  NetXen: Fixes for Power PC architecture
  NetXen: Port swap feature for multi port cards
  NetXen: Removal of redundant macros
  NetXen: Multi PCI support for Quad cards
  NetXen: Removal of redundant argument passing
  NetXen: Use multiple PCI functions
  [netdrvr e100] experiment with doing RX in a similar manner to eepro100
  [PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX
  ...
2007-04-29 10:48:48 -07:00
Linus Torvalds
f73b0a08ea Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (86 commits)
  SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c
  drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n
  pata_hpt37x: Further small fixes
  pata_hpt3x2n: Add HPT371N support and other bits
  ata: printk warning fixes
  libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET
  ahci: consolidate common port flags
  ata_timing: ensure t->cycle is always correct
  libata: add missing call to ->cable_detect() in new EH path
  pata_amd: remove contamination added during cable_detect conversion
  libata: Handle drives that require a spin-up command before first access
  libata: HPA support
  libata: kill probe_ent and related helpers
  libata: convert the remaining PATA drivers to new init model
  libata: convert the remaining SATA drivers to new init model
  libata: convert ata_pci_init_native_mode() users to new init model
  libata: convert drivers with combined SATA/PATA ports to new init model
  libata: add init helpers including ata_pci_prepare_native_host()
  libata: convert native PCI host handling to new init model
  libata: convert legacy PCI host handling to new init model
  ...
2007-04-29 10:48:21 -07:00
Linus Torvalds
6b06d2cc6d Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (105 commits)
  sonypi: use mutex instead of semaphore
  sony-laptop: remove user visible camera controls as platform attributes
  meye: make meye use sony-laptop instead of sonypi
  sony-laptop: add a meye-usable include file for camera ops
  sony-laptop: complete the motion eye camera support in sony-laptop
  sonypi: try to detect if sony-laptop has already taken one of the known ioports
  sonypi: suggest sonypi users to try sony-laptop instead
  sony-laptop: add edge modem support (also called WWAN)
  sony-laptop: add locking on accesses to the ioport and global vars
  sony-laptop: add camera enable/disable parameter, better handle possible infinite loop
  thinkpad-acpi: make drivers/misc/thinkpad_acpi:fan_mutex static
  ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdrivers
  ACPI: thinkpad-acpi: add sysfs support to hotkey subdriver
  ACPI: thinkpad-acpi: improve dock subdriver initialization
  ACPI: thinkpad-acpi: improve debugging for acpi helpers
  ACPI: thinkpad-acpi: improve fan control documentation
  ACPI: thinkpad-acpi: map ENXIO to EINVAL for fan sysfs
  ACPI: thinkpad-acpi: fix a fan watchdog invocation
  ACPI: thinkpad-acpi: do not arm fan watchdog if it would not work
  ACPI: thinkpad-acpi: add a fan-control feature master toggle
  ...
2007-04-29 10:47:25 -07:00
Len Brown
aac60c1113 Pull bugzilla-8346 into release branch 2007-04-28 23:19:25 -04:00
Len Brown
12a5a71212 Pull sbs into release branch 2007-04-28 23:16:59 -04:00
Len Brown
14d2178588 Pull dock into release branch 2007-04-28 23:13:03 -04:00
Len Brown
03feb05246 Pull ec into release branch 2007-04-28 23:12:56 -04:00
Len Brown
fb16596997 Pull misc-for-upstream into release branch 2007-04-28 23:12:03 -04:00
Len Brown
f188291aec Pull thinkpad into release branch
Conflicts:

	drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 23:11:19 -04:00
Len Brown
cfaae3ee4a Pull sony into release branch 2007-04-28 23:09:57 -04:00
Len Brown
eaf60d6924 Pull asus into release branch 2007-04-28 22:18:21 -04:00
Matthias Kaehlcke
c6c60106b9 sonypi: use mutex instead of semaphore
the Sony Programmable I/O Control driver uses a semaphore as
mutex. use the mutex API instead of the (binary) semaphore

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:13:34 -04:00
malattia@linux.it
1b20d34406 sony-laptop: remove user visible camera controls as platform attributes
Avoid giving the user the possibility to shoot his own foot and let
the meye driver enable/disable the camera wisely (PCI_ID based).

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:06:03 -04:00
malattia@linux.it
cbefb762b6 meye: make meye use sony-laptop instead of sonypi
Change sonypi_camera_command() calls to sony_pic_camera_command() and use
the renamed macros.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:06:02 -04:00
malattia@linux.it
1ce82c14d0 sony-laptop: add a meye-usable include file for camera ops
Copy and rename (for easier co-existence) the MEYE-wise exported interface.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:06:01 -04:00
malattia@linux.it
e364632e74 sony-laptop: complete the motion eye camera support in sony-laptop
Add the exported sony_pic_camera_command() function to make the MEYE
driver happy.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:06:00 -04:00
malattia@linux.it
1a3e323907 sonypi: try to detect if sony-laptop has already taken one of the known ioports
Get the IO resources list in sony-laptop in the same order as listed
in sonypi and make sonypi check if one of those is already busy.
The sonypi check can be disabled by a module parameter in case the user
thinks we are plainly wrong (check_ioport=0).

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:05:59 -04:00
malattia@linux.it
74a882e485 sonypi: suggest sonypi users to try sony-laptop instead
Try to migrate sonypi users to sony-laptop gracefully.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:05:56 -04:00
malattia@linux.it
9476cdfae6 sony-laptop: add edge modem support (also called WWAN)
Some SZ Vaios have a gsm built-in modem. Allow powering on/off this device.
Thanks to Joshua Wise for the base code.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:05:55 -04:00
malattia@linux.it
9f9f076171 sony-laptop: add locking on accesses to the ioport and global vars
Better avoid having ioport commands mixing and global variables reading/writing.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:05:53 -04:00
malattia@linux.it
5f3d2898d7 sony-laptop: add camera enable/disable parameter, better handle possible infinite loop
Use a parameter to enable/disable motion eye camera (for C1VE/C1VN models)
controls and avoid entering an infinite loop if the camera is not present
and the HW doesn't answer as we expect on io commands.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 22:05:48 -04:00
Adrian Bunk
836a53f42f thinkpad-acpi: make drivers/misc/thinkpad_acpi:fan_mutex static
This patch makes the needlessly global fan_mutex static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:52:49 -04:00
Henrique de Moraes Holschuh
d3a6ade4f8 ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdrivers
Add support to sysfs to the wan and bluetooth subdrivers.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:20 -04:00
Henrique de Moraes Holschuh
a0416420e2 ACPI: thinkpad-acpi: add sysfs support to hotkey subdriver
Add the hotkey sysfs support.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:20 -04:00
Henrique de Moraes Holschuh
d94a7f16ca ACPI: thinkpad-acpi: improve dock subdriver initialization
The dock sub-driver has split-personality (two subdrivers), and it was
doing some unoptimal things on init because of that.  Fix it so that the
second half of it will only init when necessary, and only if the first half
initialized sucessfully in the first place.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:20 -04:00
Henrique de Moraes Holschuh
5ae930e685 ACPI: thinkpad-acpi: improve debugging for acpi helpers
Some issues with the dock subdriver proved that a slightly improved
debugging setup for ACPI notifiers and handler helpers would be useful.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:19 -04:00
Henrique de Moraes Holschuh
b39fe582eb ACPI: thinkpad-acpi: improve fan control documentation
Improve fan control documentation and fix one mistake.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:19 -04:00
Henrique de Moraes Holschuh
c573ddb998 ACPI: thinkpad-acpi: map ENXIO to EINVAL for fan sysfs
Currently, all fan control operations return ENXIO if unsupported
operations are requested, but return EINVAL if invalid fan modes are
requested on a given ThinkPad.

This is not strictly correct for sysfs, so map ENXIO to EINVAL in the sysfs
attribute store handlers, as we do benefit from the ENXIO in other parts of
the driver code.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:19 -04:00
Henrique de Moraes Holschuh
ca4ac2f48a ACPI: thinkpad-acpi: fix a fan watchdog invocation
The fan control watchdog was being called in one place even when the fan
control operation had failed.  Fix it.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:18 -04:00
Henrique de Moraes Holschuh
4985cd0a63 ACPI: thinkpad-acpi: do not arm fan watchdog if it would not work
Do not enable/rearm the fan control safety watchdog if we would not be able
to do anything to the fan anyway.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:16 -04:00
Henrique de Moraes Holschuh
ecf2a80a97 ACPI: thinkpad-acpi: add a fan-control feature master toggle
Len Brown considers that an active by default fan control interface in
laptops may be too close to giving users enough rope.  There is a good
chance he is quite correct on this, especially if someone decides to use
that interface in applets and users are not aware of its risks.

This patch adds a master switch to thinkpad-acpi that enables or disables
the entire fan-control feature as a module parameter: "fan_control".  It
defaults to disabled.  Set it to non-zero to enable fan control.

Also, the patch removes the expermiental status from fan control, since it
is stable enough to not be called experimental, and the master switch makes
it safe enough to do so.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 21:41:14 -04:00
Bob Moore
79fff27002 ACPICA: clear fields reserved before FADT r3
Linux-2.6.21 stopped booting on a P4/HT because Linux
wrote the FADT.CST_CNT value to the SMI_CMD.
Apparently this stumbled over some SMM instability,
such as confusing SMM when invoking it from cpu1.

Linux did this because even though the r2 FADT reserves
the CST_CNT field, this BIOS set that field and Linux
used it.

Turns out that up through 2.6.20 we explicitly cleared
cst_control for r2 FADTs.  So here we go back to doing that,
plus also clear some additional fields that are reserved
until FADT r3.

http://bugzilla.kernel.org/show_bug.cgi?id=8346

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 20:55:06 -04:00
Milind Arun Choudhary
225036314e SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c
remove SPIN_LOCK_UNLOCKED, use DEFINE_SPINLOCK instead

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 15:16:40 -04:00
Andrew Morton
4b22afd743 drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n
This is grubby, but all the ata drivers do it this way.

Would it not be better to do

#define ata_scsi_device_resume NULL

in libata.h, remove all those ifdefs?

(updated version, ug, ug)

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 15:16:40 -04:00
Alan Cox
a473446856 pata_hpt37x: Further small fixes
Further HPT37x changes

- No 66MHz 370/370A
- Remove dead special case check now we use the DPLL (as per the IDE driver)

Pointed out by Sergei

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 15:16:39 -04:00
Alan Cox
28e21c8c0d pata_hpt3x2n: Add HPT371N support and other bits
Yes its no longer 3x2n but 3xxn, I can rename it if you want Jeff

- Don't reset both ports each time (Sergei)
- If we can't get a DPLL then abort entirely
- Use ioport access for clock (from drivers/ide)
- Add HPT371N support (from drivers/ide)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 15:16:39 -04:00
Andrew Morton
bd1d5ec64f ata: printk warning fixes
drivers/ata/libata-core.c: In function 'ata_hpa_resize':
drivers/ata/libata-core.c:986: warning: format '%lld' expects type 'long long int', but argument 5 has type 'u64'
drivers/ata/libata-core.c:986: warning: format '%lld' expects type 'long long int', but argument 6 has type 'u64'
drivers/ata/libata-core.c:990: warning: format '%lld' expects type 'long long int', but argument 4 has type 'u64'
drivers/ata/libata-core.c:990: warning: format '%lld' expects type 'long long int', but argument 5 has type 'u64'
drivers/ata/libata-core.c:1003: warning: format '%lld' expects type 'long long int', but argument 4 has type 'u64'

Also fix various 80-col bustage.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 15:16:21 -04:00
Tejun Heo
0d64a233fe libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET
Separate ATA_EHI_DID_RESET into ATA_EHI_DID_SOFTRESET and
ATA_EHI_DID_HARDRESET.  ATA_EHI_DID_RESET is redefined as OR of the
two flags.  This patch doesn't introduce any behavior change.  This
will be used later to determine whether _SDD is necessary or not.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:51:33 -04:00
Tejun Heo
1188c0d83c ahci: consolidate common port flags
Consolidate common port flags into AHCI_FLAG_COMMON.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:51:33 -04:00
Alan Cox
4f701d1e9a ata_timing: ensure t->cycle is always correct
Russell King hit a case where quantisation errors accumulated such that
the cycle time was shorter than rather than equal to the active/recovery
time. The code already knows how to stretch times to fit the cycle time
but does not know about the reverse.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:51:33 -04:00
Tejun Heo
c1c4e8d557 libata: add missing call to ->cable_detect() in new EH path
->cable_detect() used to be called on by the old ata_bus_probe() path.
Add invocation to ata_eh_revalidate_and_attach() right after IDENTIFYs
are done.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:46:18 -04:00
Tejun Heo
abcfa88bd4 pata_amd: remove contamination added during cable_detect conversion
This is added by added by cff63dfceb52c564fe1ba5394d50ab7d599a11b9
 - pata: cable methods.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:46:18 -04:00
Mark Lord
169439c2e3 libata: Handle drives that require a spin-up command before first access
(S)ATA drives can be configured for "power-up in standby",
a mode whereby a specific "spin up now!" command is required
before the first media access.

Currently, a drive with this feature enabled can not be used at all
with libata, and once in this mode, the drive becomes a doorstop.

The older drivers/ide subsystem at least enumerates the drive,
so that it can be woken up after the fact from a userspace HDIO_*
command, but not libata.

This patch adds support to libata for the "power-up in standby"
mode where a "spin up now!" command (SET_FEATURES) is needed.
With this, libata will recognize such drives, spin them up,
and then re-IDENTIFY them if necessary to get a full/complete
set of drive features data.

Drives in this state are determined by looking for
special values in id[2], as documented in the current ATA specs.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:40:40 -04:00
Alan Cox
1e999736ca libata: HPA support
Signed-off-by: Alan Cox <alan@redhat.com>

Add support for ignoring the BIOS HPA result (off by default) and setting
the disk to the full available size unless already frozen.

Tested with various platforms/disks and confirmed to work with the
Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48
readback that Tejun fixed).

For normal users this brings us, I believe, to feature parity with old IDE
(and of course more featured in some areas too).
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:06 -04:00
Tejun Heo
6bfff31e77 libata: kill probe_ent and related helpers
All drivers are converted to new init model.  Kill probe_ent,
ata_device_add() and ata_pci_init_native_mode().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:06 -04:00
Tejun Heo
5d728824ef libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.

* init_one()'s now follow more consistent init order

* cs5520 now registers one host with two ports, not two hosts.  If any
  of the two ports are disabled, it's made dummy as other drivers do.

Tested pdc_adma and pata_legacy.  Both are as broken as before.  The
rest are compile tested only.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:06 -04:00
Tejun Heo
4447d35156 libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.

Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths.  This simplifies code quite a bit.

* init_one()'s now follow more consistent init order

* ahci_setup_port() and ahci_host_init() collapsed into
  ahci_init_one() for init order consistency

* sata_vsc uses port_info instead of setting fields manually

* in sata_svw, k2_board_info converted to port_info (info is now in
  port flags).  port number is honored now.

Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:06 -04:00
Tejun Heo
9a829ccfc8 libata: convert ata_pci_init_native_mode() users to new init model
Convert drivers which use ata_pci_init_native_mode() to new init
model.  ata_pci_init_native_host() is used instead.  sata_nv, sata_uli
and sata_sis are in this category.

Tested on nVidia Corporation CK804 Serial ATA Controller [10de:0054]
in both BMDMA and ADMA mode.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:03 -04:00
Tejun Heo
eca25dca17 libata: convert drivers with combined SATA/PATA ports to new init model
Convert sata_via and sata_promise to new init model.  Both controllers
can have combined configuration (SATA + PATA) and used twisted
initialization method (modifying port in ->port_start) to overcome
probe_ent limitations.

This patch converts both drivers to new init model in which such
configuration is natively supported.

* promise: Combined pata port now uses separate port_info entry right
  after the sata counterpart entry.

* promise: Controller configuration is discerned using ap->flags.
  This simplifies init path and makes it look more like other LLDs.

* via: Both SATA and PATA ports in vt6421 are represented in their
  own port_info structure.

Tested on PDC20375 (SATA150 TX2plus) [105a:3375] and PDC40775 (SATA
300 TX2plus) [105a:3d73].  Couldn't test via cuz my c3 won't boot the
current kernel.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:03 -04:00
Tejun Heo
21b0ad4fb8 libata: add init helpers including ata_pci_prepare_native_host()
These will be used to convert LLDs to new init model.

* Add irq_handler field to port_info.  In new init model, requesting
  IRQ is LLD's responsibility and libata doesn't need to know about
  irq_handler.  Most LLDs can simply register their irq_handler but
  some need different irq_handler depending on specific chip.  The
  added port_info->irq_handler field can be used by LLDs to select
  the matching IRQ handler in such cases.

* Add ata_dummy_port_info.

* Implement ata_pci_prepare_native_host(), a helper to alloc ATA host,
  acquire all resources and init the host in one go.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:16:03 -04:00