Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current core-pkey selftest fails if the test runs without privileges to
write into the core pattern file (/proc/sys/kernel/core_pattern). This
causes the test to fail and give the impression that the subsystem being
tested is broken, when, in fact, the test is being executed without the
proper privileges. This is the current error:
test: core_pkey
tags: git_version:v4.19-3-g9e3363be9bce-dirty
Error writing to core_pattern file: Permission denied
failure: core_pkey
This patch simply skips this test if it runs without the proper privileges,
avoiding this undesired failure.
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
CC: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some ptrace selftests are passing input operands using a constraint that
can allocate any register for the operand, and using these registers on
load/store operations.
If the register allocated by the compiler happens to be zero (r0), it might
cause an invalid memory address access, since load and store operations
consider the content of 0x0 address if the base register is r0, instead of
the content of the r0 register. For example:
r1 := 0xdeadbeef
r0 := 0xdeadbeef
ld r2, 0(1) /* will load into r2 the content of r1 address */
ld r2, 0(0) /* will load into r2 the content of 0x0 */
In order to avoid this possible problem, the inline assembly constraint
should be aware that these registers will be used as a base register, thus,
r0 should not be allocated.
Other than that, this patch removes inline assembly operands that are not
used by the tests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.
It also means we don't need our own clean rule, lib.mk does it.
We also have to update the ptrace-pkey and core-pkey rules to use
$(OUTPUT).
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.
The segmentation fault happens because of a inline assembly being
generated as:
0x10000355c <tm_spd_gpr+492> lfs f0, 0(0)
This is reading memory position 0x0 and causing the segmentation fault.
This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:
[flt_4] "r" (&d)
Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.
This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.
Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a new test for the new PTRACE_SYSEMU ptrace request.
This test also relies on PTRACE_GETREGS and PTRACE_SETREGS requests to
run properly, since the trace instruction (gettid() syscall) is being
modified at run-time (by PTRACE_SETREGS) and re-executed three times.
PTRACE_GETREGS is being used to check that the registers are still
sane.
This test basically creates a child process that executes syscalls
and the parent process check if it is being traced appropriately. The
parent process guarantees that the SYSCALLs are being traced, with
PTRACE_SYSEMU, and ptrace stops the child application before a syscall is
executed. The way the tests validates it, is by guaranteeing that the
system calls arguments, as argv[0] (r3) which is the same register that
will have the syscall return value on powerpc, are not being corrupted on
PTRACE_SYSEMU with a return value, i.e, it continues to have the current
arguments instead, meaning that the registers where not clobbered.
This test is basically the same test for x86 located at
tools/testing/selftests/x86/ptrace_syscall.c, limited to test PTRACE_SYSEMU
request, and ported to PowerPC.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit b2d35fa5fc ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.
This broke building all the powerpc selftests with eg:
make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed
Fix it by setting top_srcdir in the affected Makefiles.
Fixes: b2d35fa5fc ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The test case assumes execute-permissions of unallocated keys are
enabled by default, which is incorrect.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only when the key is allocated, its permission are enabled.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This tests perf hardware breakpoints (ie PERF_TYPE_BREAKPOINT) on
powerpc.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This test verifies that the AMR, IAMR and UAMOR are being written to a
process' core file.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Simplify make rule]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This test exercises read and write access to the AMR, IAMR and UAMOR.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Simplify make rule]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and
PPC_PTRACE_SETHWDEBUG. This test was use to find the bugs fixed by
these recent commits:
4f7c06e26e powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
cd6ef7eebf powerpc/ptrace: Fix enforcement of DAWR constraints
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Add SPDX tag, clang format it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC 7 will take "r2" in clobber list as an error and it will get
following build errors for powerpc ptrace selftests even with -fno-pic
option:
ptrace-tm-vsx.c: In function ‘tm_vsx’:
ptrace-tm-vsx.c:42:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-vsx] Error 1
ptrace-tm-spd-vsx.c: In function ‘tm_spd_vsx’:
ptrace-tm-spd-vsx.c:55:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-spd-vsx] Error 1
ptrace-tm-spr.c: In function ‘tm_spr’:
ptrace-tm-spr.c:46:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
Fix the build error by removing "r2" from the clobber list. None of
these asm blocks actually clobber r2.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently these tests won't build with a `--enable-default-pie`
compiler as they require r30 to be clobbered. This gives
an error:
ptrace-tm-spd-gpr.c:41:2: error: PIC register clobbered by 'r30' in 'asm'
This forces these tests to be built no-pie.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for TM SPR registers. This
also adds ptrace interface based helper functions related to TM
SPR registers access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for VSX, VMX registers
inside TM context. This also adds ptrace interface based helper
functions related to chckpointed VSX, VMX registers access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for VSX, VMX registers.
This also adds ptrace interface based helper functions related
to VSX, VMX registers access. This also adds some assembly
helper functions related to VSX and VMX registers.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for TAR, PPR, DSCR
registers inside TM context. This also adds ptrace
interface based helper functions related to checkpointed
TAR, PPR, DSCR register access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for TAR, PPR, DSCR
registers. This also adds ptrace interface based helper
functions related to TAR, PPR, DSCR register access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for GPR/FPR registers
inside suspended TM context.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for GPR/FPR registers
inside TM context. This adds ptrace interface based helper
functions related to checkpointed GPR/FPR access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for GPR/FPR registers.
This adds ptrace interface based helper functions related to
GPR/FPR access and some assembly helper functions related to
GPR/FPR registers.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Add #defines for the new note types when headers don't define them]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
