Commit Graph

15 Commits

Author SHA1 Message Date
Vinod Koul
b53c758280 Merge branch 'topic/sh' into for-linus 2015-04-21 00:21:14 +05:30
Yoshihiro Shimoda
0c1c8ff32f dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
This DMAC is Renesas USB high-speed module DMA controller that
supports slave transfer.

This USB-DMAC has similar register sets with R-Car Gen2 DMAC, but
the USB-DMAC has specific registers to control the USB transactions.
If this code is added into the rcar-dmac driver, it will become
unreadable. So, this driver is independent from the rcar-dmac.

And, this USB-DMAC uses virt-dma infrastructure.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-02 12:57:32 +05:30
Kuninori Morimoto
3cd44dcd35 dmaengine: remove Renesas Audio DMAC peri peri
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri on DMAEngine is no longer needed. remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-03-18 13:57:54 +05:30
Laurent Pinchart
87244fe5ab dmaengine: rcar-dmac: Add Renesas R-Car Gen2 DMA Controller (DMAC) driver
The DMAC is a general purpose multi-channel DMA controller that supports
both slave and memcpy transfers.

The driver currently supports the DMAC found in the r8a7790 and r8a7791
SoCs. Support for compatible DMA controllers (such as the audio DMAC)
will be added later.

Feature-wise, automatic hardware handling of descriptors chains isn't
supported yet. LPAE support is implemented.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-12-23 11:13:01 +02:00
Laurent Pinchart
9f2c2bb312 dmaengine: sh: Rework Kconfig and Makefile
Separate helpers and drivers in the Kconfig and Makefile to improve
readability and move the CONFIG_OF dependency from the Makefile to
Kconfig.

[pebolle@tiscali.nl: reported need to rename SHDMA_R8A73A4 instances]
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: squashed rename of SHDMA_R8A73A4 instances]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Kuninori Morimoto
e43a34e3ec shdma: add R-Car Audio DMAC peri peri driver
Add support Audio DMAC peri peri driver
for Renesas R-Car Gen2 SoC, using 'shdma-base'
DMA driver framework.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[fixed checkpatch error]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-29 19:38:09 +05:30
Vinod Koul
265d9c673d Merge branch 'topic/sh' into for-linus
Conflicts:
	drivers/dma/sh/Kconfig
	drivers/dma/sh/shdmac.c

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02 17:42:35 +05:30
Max Filippov
c4f6c41ba7 dma: add driver for R-Car HPB-DMAC
Add support for HPB-DMAC found in Renesas R-Car SoCs, using 'shdma-base' DMA
driver framework.

Based on the original patch by Phil Edworthy <phil.edworthy@renesas.com>.

Signed-off-by: Max Filippov <max.filippov@cogentembedded.com>
[Sergei: removed useless #include, sorted #include's, fixed HPB_DMA_TCR_MAX,
fixed formats and removed line breaks in the dev_dbg() calls, rephrased and
added IRQ # to the shdma_request_irq() failure message, added MODULE_AUTHOR(),
removed '__init'/'__exit' annotations from the probe()/remove() methods, removed
'__initdata' annotation from 'hpb_dmae_driver', fixed guard macro name in the
header file, fixed #define ASYNCRSTR_ASRST20, added #define ASYNCRSTR_ASRST24,
added the necessary runtime PM calls to the probe() and remove() methods,
handled errors returned by dma_async_device_register(), beautified comments
and #define's.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02 17:35:55 +05:30
Guennadi Liakhovetski
1e69653d40 DMA: shdma: add r8a73a4 DMAC data to the device ID table
This configuration data will be used, when DMAC DT support is added to
r8a73a4.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-27 14:26:21 +05:30
Guennadi Liakhovetski
4981c4dc19 DMA: shdma: switch DT mode to use configuration data from a match table
This facilitates DMAC DT support by eliminating the need in AUXDATA and
avoiding creating complex DT data. This also fits well with DMAC devices,
of which SoCs often have multiple identical copies and it is perfectly
valid to use a single configuration data set for all of them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-27 14:25:09 +05:30
Guennadi Liakhovetski
67eacc1583 DMA: shdma: add DT support
This patch adds Device Tree support to the shdma driver. No special DT
properties are used, only standard DMA DT bindings are implemented. Since
shdma controllers reside on SoCs, their configuration is SoC-specific and
shall be passed to the driver from the SoC platform data, using the
auxdata procedure.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05 11:41:00 +05:30
Shimoda, Yoshihiro
18a1053f7b sudmac: add support for SUDMAC
Some Renesas USB modules have SUDMAC. This patch supports it using
the shdma-base driver.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-30 15:50:12 +05:30
Shimoda, Yoshihiro
189b4ee8e9 dma: sh: add Kconfig
This patch adds Kconfig in the drivers/dma/sh. This patch also adds
a new config "SH_DMAE_BASE" and the "config SH_DMAE" depends on it.
Since some drivers (e.g. sh_mmcif.c) depends on shdma-base.c if
CONFIG_DMA_ENGINE=y, the "config SH_DMAE_BASE" is set as "bool".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-30 15:50:12 +05:30
Guennadi Liakhovetski
9a7b8e002e dmaengine: add an shdma-base library
This patch extracts code from shdma.c, that does not directly deal with
hardware implementation details and can be re-used with diverse DMA
controller variants, found on SH-based SoCs.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 09:13:07 +05:30
Guennadi Liakhovetski
e95be94b8c dma: move shdma driver to an own directory
The shdma driver is going to be split into multiple files. To make this more
convenient move it to an own directory.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 09:12:59 +05:30