Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
-----BEGIN PGP SIGNATURE-----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=72wu
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
-----BEGIN PGP SIGNATURE-----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=ZmKI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
To prepare for making connector creation optional in the driver, pass
the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer
is passed to the callers where required, particularly to the
dw_hdmi_phy_ops .init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
Replace the drm_connector pointer passed to the .mode_valid() function
with a const drm_display_info pointer, as that's all the function should
need. Use the display info passed to the bridge .mode_valid() operation
instead of retrieving it from the connector, to prepare for make
connector creation optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
Platform glue drivers for dw_hdmi may need to access device-specific
data from their .mode_valid() implementation. They currently have no
clean way to do so, and one driver hacks around it by accessing the
dev_private data of the drm_device retrieved from the connector.
Add a priv_data void pointer to the dw_hdmi_plat_data structure, and
pass it to the .mode_valid() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix
-----BEGIN PGP SIGNATURE-----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=IBzW
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"One sun4i fix and a connector hotplug race The ast fix is for a
regression in 5.6, and one of the i915 ones fixes an oops reported by
dhowells.
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix"
* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fix missing break in switch statement for format->cpp[0] case 4
drm/sun4i: hdmi ddc clk: Fix size of m divider
drm/i915/display: Only query DP state of a DDI encoder
drm/i915/params: fix i915.reset module param type
drm/i915/gem: Mark the buffer pool as active for the cmdparser
drm/connector: notify userspace on hotplug after register complete
Rename the macro to DRM_GEM_CMA_DRIVER_OPS_VMAP to align naming with
SHMEM helpers and drm_gem_cma_prime_import_sg_table_vmap(). An variant of
the macro is provided for drivers that override the default .dumb_create
callback. Adapt drivers to the changes.
v3:
* rename macro to signal implicit vmap on imported buffers
v2:
* provide DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-3-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.
Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
Older compilers warn about initializers with incorrect curly
braces:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable':
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces]
union phy_configure_opts opts = { 0 };
^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces]
Use the GNU empty initializer extension to avoid this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de
gpiod_get_value() can return negative values if an error occurs.
In several places this error code was ignored.
Ensure that errors codes are handled correctly throughout the CEC
pin framework and CEC pin drivers.
The return code of the cec_pin_ops read() callback had to be changed
from 'bool' to 'int', which mean the prototype of that callback in the
sun4i drm driver also had to be changed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de
The ingenic driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-15-tzimmermann@suse.de
Now that de2_fmt_info contains only DRM <-> HW format mapping, it
doesn't make sense to return pointer to structure when searching by DRM
format. Rework that to return only HW format instead.
This doesn't make any functional change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-7-jernej.skrabec@siol.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge v5.6-rc5 into drm-next
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
DE3 VI layers support alpha blending, but DE2 VI layers do not.
Additionally, DE3 VI layers support 10-bit RGB and YUV formats.
Make a separate list for DE3.
Fixes: c50519e6db ("drm/sun4i: Add basic support for DE3")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.
The change is based on the following semantic patch, with manual review
and edits.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}
@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}
@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
A20 SoC (found in Cubieboard 2 among others) requires different LVDS set
up procedure than A33. Timing controller (tcon) driver only implements
sun6i-style procedure, that doesn't work on A20 (sun7i).
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219180858.4806-6-andrey.lebedev@gmail.com
Timing controllers on A20 are not equivalent: tcon0 on A20 supports
LVDS output and tcon1 does not. Separate the capabilities by
introducing independent set of quirks for each of the tcons.
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219180858.4806-3-andrey.lebedev@gmail.com
We need to make sure that the DRM driver is fully registered before
allowing the panel to be attached. Otherwise, we may trigger a hotplug
event before sun4i_framebuffer_init() sets up drm->mode_config.funcs,
causing a NULL pointer dereference.
Fixes: 1a2703bd73 ("drm/sun4i: dsi: Allow binding the host without a panel")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200217060906.15152-1-samuel@sholland.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5JsVQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHZEH+wddtJO4dZk5TZdF
KZB2w2ldsCvrBZAmas1TVvm8ncvUf+ATUZcSIzvZ3YbLmxsuLF2Cz3kD+n+36Mvy
ejwq8Scl7jwnouYps/Gfd6rRj/uCafqST4qp15GMGeiy2ST4A8dJrv5IAgZhD8/N
SN1bSr1AXpZ2JlEzzLDQ/NdVoNMS6IzCOsaINZcc60/XQoQZFRBWamMJFqu+CmXD
SBJOybQNFJhziy45cGZSAl+67sSCcoPftwTs0Stu4CJsvFWRb3MsbNTDS51Hjcc4
3tdgGOhoNXzyzZr96MEAHmiaW4VLQv0PGgUfOajE35viMz48OrwCTru8Kbuae3XM
YHV4qJk=
=yiem
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkpecgAKCRDj7w1vZxhR
xU4CAQD/8ZzfYroiiEI7FHEgvnuldGYZqA9kbNAO2Vueeac0OgD+Jojewdxy+pJ9
dxfA/POdtzx3hOdN+U1YgaDC0hbXwww=
=XgKq
-----END PGP SIGNATURE-----
Merge v5.6-rc2 into drm-misc-next
Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The driver currently uses runtime PM to perform some of the module
initialization and cleanup. This has three problems:
1) There is no Kconfig dependency on CONFIG_PM, so if runtime PM is
disabled, the driver will not work at all, since the module will
never be initialized.
2) The driver does not ensure that the device is suspended when
sun6i_dsi_probe() fails or when sun6i_dsi_remove() is called. It
simply disables runtime PM. From the docs of pm_runtime_disable():
The device can be either active or suspended after its runtime PM
has been disabled.
And indeed, the device will likely still be active if sun6i_dsi_probe
fails. For example, if the panel driver is not yet loaded, we have
the following sequence:
sun6i_dsi_probe()
pm_runtime_enable()
mipi_dsi_host_register()
of_mipi_dsi_device_add(child)
...device_add()...
__device_attach()
pm_runtime_get_sync(dev->parent) -> Causes resume
bus_for_each_drv()
__device_attach_driver() -> No match for panel
pm_runtime_put(dev->parent) -> Async idle request
component_add()
__component_add()
try_to_bring_up_masters()
try_to_bring_up_master()
sun4i_drv_bind()
component_bind_all()
component_bind()
sun6i_dsi_bind() -> Fails with -EPROBE_DEFER
mipi_dsi_host_unregister()
pm_runtime_disable()
__pm_runtime_disable()
__pm_runtime_barrier() -> Idle request is still pending
cancel_work_sync() -> DSI host is *not* suspended!
Since the device is not suspended, the clock and regulator are never
disabled. The imbalance causes a WARN at devres free time.
3) The driver relies on being suspended when sun6i_dsi_encoder_enable()
is called. The resume callback has a comment that says:
Some part of it can only be done once we get a number of
lanes, see sun6i_dsi_inst_init
And then part of the resume callback only runs if dsi->device is not
NULL (that is, if sun6i_dsi_attach() has been called). However, as
the above call graph shows, the resume callback is guaranteed to be
called before sun6i_dsi_attach(); it is called before child devices
get their drivers attached.
Therefore, part of the controller initialization will only run if the
device is suspended between the calls to mipi_dsi_host_register() and
component_add() (which ends up calling sun6i_dsi_encoder_enable()).
Again, as shown by the above call graph, this is not the case. It
appears that the controller happens to work because it is still
initialized by the bootloader.
Because the connector is hardcoded to always be connected, the
device's runtime PM reference is not dropped until system suspend,
when sun4i_drv_drm_sys_suspend() ends up calling
sun6i_dsi_encoder_disable(). However, that is done as a system sleep
PM hook, and at that point the system PM core has already taken
another runtime PM reference, so sun6i_dsi_runtime_suspend() is
not called. Likewise, by the time the PM core releases its reference,
sun4i_drv_drm_sys_resume() has already re-enabled the encoder.
So after system suspend and resume, we have *still never called*
sun6i_dsi_inst_init(), and now that the rest of the display pipeline
has been reset, the DSI host is unable to communicate with the panel,
causing VBLANK timeouts.
Fix all of these issues by inlining the runtime PM hooks into the
encoder enable/disable functions, which are guaranteed to run after a
panel is attached. This allows sun6i_dsi_inst_init() to be called
unconditionally. Furthermore, this causes the hardware to be turned off
during system suspend and reinitialized on resume, which was not
happening before.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-4-samuel@sholland.org
Currently, the DSI host blocks binding the display pipeline until the
panel is available. This unnecessarily prevents other display outpus
from working, and adds logspam to dmesg when the panel driver is built
as a module (the component master is unsuccessfully brought up several
times during boot).
Flip the dependency, instead requiring the host to be bound before the
panel is attached. The panel driver provides no functionality outside of
the display pipeline anyway.
Since the panel is now probed after the DRM connector, we need a hotplug
event to turn on the connector after the panel is attached.
This has the added benefit of fixing panel module removal/insertion.
Previously, the panel would be turned off when its module was removed.
But because the connector state was hardcoded, nothing knew to turn the
panel back on when it was re-attached. Now, with hotplug events
available, the connector state will follow the panel module state, and
the panel will be re-enabled properly.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-3-samuel@sholland.org
The continued use of an ERR_PTR to signify "no panel" outside of
sun6i_dsi_attach is confusing because it is a double negative. Because
the connector always reports itself as connected, there is also the
possibility of sending an ERR_PTR to drm_panel_get_modes(), which would
crash.
Solve both of these by only storing the panel pointer if it is valid.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-2-samuel@sholland.org
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
- Fix null pointer deref in drm_dp_mst_process_up_req().
-----BEGIN PGP SIGNATURE-----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=VCDX
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v5.6:
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
- Fix null pointer deref in drm_dp_mst_process_up_req().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
This reverts commit 9db9c0cf58.
Setting mode_config.allow_fb_modifiers manually is completely
unnecessary. It is set automatically by drm_universal_plane_init() based
on the fact if modifier list is provided or not. Even more, it breaks
DE2 and DE3 as they don't support any modifiers beside linear. Modifiers
aware applications can be confused by provided empty modifier list - at
least linear modifier should be included, but it's not for DE2 and DE3.
Fixes: 9db9c0cf58 ("drm/sun4i: drv: Allow framebuffer modifiers in mode config")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126065937.9564-1-jernej.skrabec@siol.net
The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech
The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech
In commit 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.
However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.
Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.
This fixes the scrolling artifacts seen on my A13 tablet.
Fixes: 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.
Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.
Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.
Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.
-----BEGIN PGP SIGNATURE-----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=ye8f
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-01-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.
Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.
Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.
Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have DSI_SCLK gating so add compatible
for Allwinner A64 with uninitialized has_mod_clk driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-6-jagan@amarulasolutions.com
regmap has special API to enable the controller bus clock while
initializing register space, and current driver is using
devm_regmap_init_mmio_clk which require to specify bus
clk_id argument as "bus"
But, the usage of clocks are varies between different Allwinner
DSI controllers. Clocking in A33 would need bus and mod clocks
where as A64 would need only bus clock.
Since A64 support only single bus clock, it is optional to
specify the clock-names on the controller device tree node.
So using NULL on clk_id would get the attached clock.
To support clk_id as "bus" and "NULL" during clock enablement
between controllers, this patch add generic code to handle
the bus clock using regmap_mmio_attach_clk with associated
regmap APIs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-5-jagan@amarulasolutions.com
As per the user manual, look like mod clock is not mandatory
for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLK for A31 and not available in A64.
So, add compatible check for A31 and get mod clock accordingly.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-4-jagan@amarulasolutions.com
When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup()
are called. This also happens when the connector and the encoder are
destroyed. This double call triggers a NULL pointer exception.
The patch fixes this by removing the cleanup calls in the unbind
function.
Cc: <stable@vger.kernel.org>
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
