The sink rate read from supported link rate table is in KHz as per spec
while in drm, the saved clock is in deca-KHz. So divide the link rate by
10 before storing.
Reading of rates was added by:
commit fc0f8e2531 ("drm/i915/skl: Read sink supported rates from edp
panel")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The eDP port A register on PCH split platforms has a slightly different
register layout from the other ports, with bit 6 being either alternate
scrambler reset or reserved, depending on the generation. Our
misinterpretation of the bit as audio has lead to warning.
Fix this by not enabling audio on port A, since none of our platforms
support audio on port A anyway.
v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models
shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz)
as a BTO option, both versions used dual channel LVDS even though
the smaller one would have fit into a single channel.
Notes:
Bug report showing that the MacBookPro8,2 with 1440x900 uses dual
channel LVDS (this lead to it being hardcoded in intel_lvds.c by
Daniel Vetter with commit 618563e394):
https://bugzilla.kernel.org/show_bug.cgi?id=42842
If i915.lvds_channel_mode=2 is missing even though the machine needs
it, every other vertical line is white and consequently, only the left
half of the screen is visible (verified by myself on a MacBookPro9,1).
Forum posting concerning a MacBookPro6,2 with 1440x900, author is
using i915.lvds_channel_mode=2 on the kernel command line, proving
that the machine uses dual channels:
https://bbs.archlinux.org/viewtopic.php?id=185770
Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all
MacBook Pro "A1286" models, and that model number encompasses the
MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's
driven with dual channel LVDS:
http://www.ebay.com/itm/-/400690878560http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf
Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones
with i915 graphics and dual channel LVDS, so that list should be
complete. And the 8,2 is already in intel_lvds.c.
Possible motivation to use dual channel LVDS even on the 1440x900
models: Reduce the number of different parts, i.e. use identical logic
boards and display cabling on both versions and the only differing
component is the panel.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
[Jani: included notes in the commit message for posterity]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Single channel LVDS maxes out at 112 MHz, anything above must be dual
channel. This avoids the need to specify i915.lvds_channel_mode=2 on
all 17" MacBook Pro models with i915 graphics since they had 1920x1200
(193 MHz), plus those 15" pre-retina models which had a resolution
of 1680x1050 (119 MHz) as a BTO option.
Source for 112 MHz limit of single channel LVDS is section 2.3 of:
https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf
v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the
resolution necessitates it, suggested by Jani Nikula.
v3: Fix typo, thanks Joonas Lahtinen.
v4: Split commit in two, suggested by Ville Syrjälä.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
[Jani: included spec reference into the commit message]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Hardware doesn't seem to work correctly, just block userspace in this case.
v2: add missing defines
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just a single intel fix
* tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel:
drm/i915/chv: Implement WaDisableShadowRegForCpd
one fix and maintainers update
* 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: fix error check when getting irq
MAINTAINERS: add entry for Rockchip drm drivers
This WA is avoid problem between shadow vs wake FIFO unload
problem during CPD/RC6 transactions on CHV.
v2: Define individual bits GTFIFOCTL (Ville)
v3: move WA to uncore_early_sanitize (ville)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Jani: fixed some whitespace issues while applying]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Otherwise we print false warning from time to time.
v2: agd5f: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the change isn't atomic.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise it is possible that we will have page table corruption
if we change a BOs address multiple times.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we unmap BOs before releasing them them the intervall tree locks
up because we try to remove an entry not inside the tree.
Based on a patch from Michel Dänzer.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the driver may try and send audio which may confuse the
monitor.
v2: set pin to NULL if no audio
v3: avoid crash with analog encoders
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Don't enable the audio and avi infoframes and audio stream
until all the state is set up.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It's mostly duplicated with evergreen_dp_enable. This
is a prerequisite for fix implemented in another patch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Set the line first, then enable the stream. May fix
pink line problems on some displays.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The number of relocs is passed in by userspace and can be large. It has
been observed to cause kcalloc failures in the wild.
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
three fixes for i915.
* tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg
drm/i915: Workaround to avoid lite restore with HEAD==TAIL
drm/i915: cope with large i2c transfers
Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across
suspend/resume, so fix this.
This was introduced in
commit ddeea5b0c3
Author: Imre Deak <imre.deak@intel.com>
Date: Mon May 5 15:19:56 2014 +0300
drm/i915: vlv: add runtime PM support
I noticed this only by reading the code. To my knowledge it shouldn't
cause any real problems at the moment, since the power well backing this
register remains on across a runtime s/r. This may change once
system-wide s0ix functionality is enabled in the kernel.
v2:
- resend after a missing git add -u :/
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
WaIdleLiteRestore is an execlists-only workaround, and requires the driver
to ensure that any context always has HEAD!=TAIL when attempting lite
restore.
Add two extra MI_NOOP instructions at the end of each request, but keep
the requests tail pointing before the MI_NOOPs. We may not need to
executed them, and this is why request->tail is sampled before adding
these extra instructions.
If we submit a context to the ELSP which has previously been submitted,
move the tail pointer past the MI_NOOPs. This ensures HEAD!=TAIL.
v2: Move overallocation to gen8_emit_request, and added note about
sampling request->tail in commit message (Chris).
v3: Remove redundant request->tail assignment in __i915_add_request, in
lrc mode this is already set in execlists_context_queue.
Do not add wa implementation details inside gem (Chris).
v4: Apply the wa whenever the req has been resubmitted and update
comment (Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The hardware, according to the specs, is limited to 256 byte transfers,
and current driver has no protections in case users attempt to do larger
transfers. The code will just stomp over status register and mayhem
ensues.
Let's split larger transfers into digestable chunks. Doing this allows
Atmel MXT driver on Pixel 1 function properly (it hasn't since commit
9d8dc3e529 "Input: atmel_mxt_ts -
implement T44 message handling" which tries to consume multiple
touchscreen/touchpad reports in a single transaction).
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
At present, dma_buf_export() takes a series of parameters, which
makes it difficult to add any new parameters for exporters, if required.
Make it simpler by moving all these parameters into a struct, and pass
the struct * as parameter to dma_buf_export().
While at it, unite dma_buf_export_named() with dma_buf_export(), and
change all callers accordingly.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.
I've included the patch into the merge to fix the build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
platform_get_irq() can return negative error values and we already test for
these. Therefore the variable holding this value should be signed to not
loose possible error values.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-By: Daniel Kurtz <djkurtz@chromium.org>
devicetree changes queued up for v4.1. Here are the highlights:
- Lots of unittest cleanup from Frank Rowand
- Bugfixes and updates to the of_graph code
- Tighten up of_get_mac_address() code
- Documentation updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=u6Zy
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux
Pull devicetree changes from Grant Likely:
"Here are the devicetree changes queued up for v4.1. Nothing really
exciting here. Rob has another few commits for big-endian attached
UARTs, but those will be sent in a separate merge request since they
haven't been as thoroughly tested as this batch.
Here are the highlights:
- lots of unittest cleanup from Frank Rowand
- bugfixes and updates to the of_graph code
- tighten up of_get_mac_address() code
- documentation updates"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
of/unittest: Fix of_platform_depopulate test case
of/unittest: early return from test skips tests
of/unittest: breadcrumbs to reduce pain of future maintainers
of/unittest: reduce checkpatch noise - line after declarations
of/unittest: typo in error string
of/unittest: add const where needed
of_net: factor out repetitive code from of_get_mac_address()
drivers/of: Add empty ranges quirk for PA-Semi
of: Allow selection of OF_DYNAMIC and OF_OVERLAY if OF_UNITTEST
of: Empty node & property flag accessors when !OF
of: Explicitly include linux/types.h in of_graph.h
dt-bindings: brcm: rationalize Broadcom documentation naming
of/unittest: replace 'selftest' with 'unittest'
Documentation: rename of_selftest.txt to of_unittest.txt
Documentation: update the of_selftest.txt
dt: OF_UNITTEST make dependency broken
MAINTAINERS: Pantelis Antoniou device tree overlay maintainer
of: Add of_graph_get_port_by_id function
of: Add for_each_endpoint_of_node helper macro
of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
We have grown a number of different implementations of
DIV_ROUND_CLOSEST_ULL throughout the kernel. Move the i915 one to
kernel.h so that it can be reused.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Reviewed-by: Jeff Epler <jepler@unpythonic.net>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Misc i915 fixes.
* tag 'drm-intel-next-fixes-2015-04-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Dont enable CS_PARSER_ERROR interrupts at all
drm/i915: Move drm_framebuffer_unreference out of struct_mutex for takeover
drm/i915: Allocate connector state together with the connectors
drm/i915/chv: Remove DPIO force latency causing interpair skew issue
drm/i915: Don't cancel DRRS worker synchronously for flush/invalidate
drm/i915: Fix locking in DRRS flush/invalidate hooks
One more drm-misch pull for 4.1 with mostly simple stuff and boring
refactoring. Even the cursor fix from Matt is just to make a really anal
igt happy.
* tag 'topic/drm-misc-2015-04-15' of git://anongit.freedesktop.org/drm-intel:
drm: fix trivial typo mistake
drm: Make integer overflow checking cover universal cursor updates (v2)
drm: make crtc/encoder/connector/plane helper_private a const pointer
drm/armada: constify struct drm_encoder_helper_funcs pointer
drm/radeon: constify more struct drm_*_helper funcs pointers
drm/edid: add #defines for ELD versions
drm/atomic: Add for_each_{connector,crtc,plane}_in_state helper macros
drm: Use kref_put_mutex in drm_gem_object_unreference_unlocked
drm/drm: constify all struct drm_*_helper funcs pointers
drm/qxl: constify all struct drm_*_helper funcs pointers
drm/nouveau: constify all struct drm_*_helper funcs pointers
drm/radeon: constify all struct drm_*_helper funcs pointers
drm/gma500: constify all struct drm_*_helper funcs pointers
drm/mgag200: constify all struct drm_*_helper funcs pointers
drm/exynos: constify all struct drm_*_helper funcs pointers
drm: Fix some typos
This set of patches adjust the setup of the HDMI CTS/N values for audio
support to be compliant with the work-around given in the iMX6 errata
documentation as part of the preparation for integrating audio support
for this driver, and also update the HDMI phy configuration for Rockchip
devices to improve the HDMI eye pattern.
* 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm: rockchip/dw_hdmi-rockchip: improve for HDMI electrical test
drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver
drm: bridge/dw_hdmi: fixed codec style
drm: bridge/dw_hdmi: adjust n/cts setting order
drm: bridge/dw_hdmi: protect n/cts setting with a mutex
drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()
Conflicts:
drivers/gpu/drm/imx/dw_hdmi-imx.c
Some final bits for 4.1. Some fixes for userptrs and allow a new
packet for VCE to enable some new features in mesa.
* 'drm-next-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: allow creating overlapping userptrs
drm/radeon: add userptr config option
drm/radeon: add video usability info support for VCE
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
Tracepoints have helper functions for the TP_printk() called
__print_symbolic() and __print_flags() that lets a numeric number be
displayed as a a human comprehensible text. What is placed in the
TP_printk() is also shown in the tracepoint format file such that
user space tools like perf and trace-cmd can parse the binary data
and express the values too. Unfortunately, the way the TRACE_EVENT()
macro works, anything placed in the TP_printk() will be shown pretty
much exactly as is. The problem arises when enums are used. That's
because unlike macros, enums will not be changed into their values
by the C pre-processor. Thus, the enum string is exported to the
format file, and this makes it useless for user space tools.
The TRACE_DEFINE_ENUM() solves this by converting the enum strings
in the TP_printk() format into their number, and that is what is
shown to user space. For example, the tracepoint tlb_flush currently
has this in its format file:
__print_symbolic(REC->reason,
{ TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
{ TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
{ TLB_LOCAL_SHOOTDOWN, "local shootdown" },
{ TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
After adding:
TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
Its format file will contain this:
__print_symbolic(REC->reason,
{ 0, "flush on task switch" },
{ 1, "remote shootdown" },
{ 2, "local shootdown" },
{ 3, "local mm shootdown" })
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVLBTuAAoJEEjnJuOKh9ldjHMIALdRS755TXCZGOf0r7O2akOR
wMPeum7C+ae1mH+jCsJKUC0/jUfQKaMt/UxoHlipDgcGg8kD2jtGnGCw4Xlwvdsr
y4rFmcTRSl1mo0zDSsg6ujoupHlVYN0+JPjrd7S3cv/llJoY49zcanNLF7S2XLeM
dZCtWRLWYpBiWO68ai6AqJTnE/eGFIqBI048qb5Eg8dbK243SSeSIf9Ywhb+VsA+
aq6F7cWI/H6j4tbeza8tAN19dcwenDro5EfCDY8ARQHJu1f6Y3+DLf2imjkd6Aiu
JVAoGIjHIpI+djwCZC1u4gi4urjfOqYartrM3Q54tb3YWYqHeNqP2ASI2a4EpYk=
=Ixwt
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
Tracepoints have helper functions for the TP_printk() called
__print_symbolic() and __print_flags() that lets a numeric number be
displayed as a a human comprehensible text. What is placed in the
TP_printk() is also shown in the tracepoint format file such that user
space tools like perf and trace-cmd can parse the binary data and
express the values too. Unfortunately, the way the TRACE_EVENT()
macro works, anything placed in the TP_printk() will be shown pretty
much exactly as is. The problem arises when enums are used. That's
because unlike macros, enums will not be changed into their values by
the C pre-processor. Thus, the enum string is exported to the format
file, and this makes it useless for user space tools.
The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
the TP_printk() format into their number, and that is what is shown to
user space. For example, the tracepoint tlb_flush currently has this
in its format file:
__print_symbolic(REC->reason,
{ TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
{ TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
{ TLB_LOCAL_SHOOTDOWN, "local shootdown" },
{ TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
After adding:
TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
Its format file will contain this:
__print_symbolic(REC->reason,
{ 0, "flush on task switch" },
{ 1, "remote shootdown" },
{ 2, "local shootdown" },
{ 3, "local mm shootdown" })"
* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Add enum_map file to show enums that have been mapped
writeback: Export enums used by tracepoint to user space
v4l: Export enums used by tracepoints to user space
SUNRPC: Export enums in tracepoints to user space
mm: tracing: Export enums in tracepoints to user space
irq/tracing: Export enums in tracepoints to user space
f2fs: Export the enums in the tracepoints to userspace
net/9p/tracing: Export enums in tracepoints to userspace
x86/tlb/trace: Export enums in used by tlb_flush tracepoint
tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
tracing: Allow for modules to convert their enums to values
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
tracing: Give system name a pointer
brcmsmac: Move each system tracepoints to their own header
iwlwifi: Move each system tracepoints to their own header
mac80211: Move message tracepoints to their own header
tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
tracing: Add TRACE_SYSTEM_VAR to kvm-s390
tracing: Add TRACE_SYSTEM_VAR to intel-sst
...
We stopped handling them in
commit aaecdf611a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Nov 4 15:52:22 2014 +0100
drm/i915: Stop gathering error states for CS error interrupts
but just clearing is apparently not enough: A sufficiently dead gpu
left behind by firmware (*cough* coreboot *cough*) can keep the gpu in
an endless loop of such interrupts, eventually leading to the nmi
firing. And definitely to what looks like a machine hang.
Since we don't even enable these interrupts on gen5+ let's do the same
on earlier platforms.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93171
Tested-by: Mono <mono-for-kernel-org@donderklumpen.de>
Tested-by: info@gluglug.org.uk
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_user_framebuffer_destroy() requires the struct_mutex for its
object bookkeeping, so this means that all calls to
drm_framebuffer_unreference must be held without that lock.
This is a simplified version of the identically named patch by Chris Wilson.
Regression from commit ab8d66752a
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Mon Feb 2 15:44:15 2015 +0000
drm/i915: Track old framebuffer instead of object
v2: Bikeshedding.
References: https://bugs.freedesktop.org/show_bug.cgi?id=89166
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Our legacy SetPlane updates perform integer overflow checking on a
plane's destination rectangle in drm_mode_setplane(), and atomic updates
handled as part of a drm_atomic_state transaction do the same checking
in drm_atomic_plane_check(). However legacy cursor updates that get
routed through universal plane interfaces may bypass this overflow
checking if the driver's .update_plane is serviced by the transitional
plane helpers rather than the full atomic plane helpers.
Move the check for destination rectangle integer overflow from the
drm_mode_setplane() to __setplane_internal() so that it also covers
cursor operations.
This fixes an issue first noticed with i915 commit:
commit ff42e093e9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Mar 2 16:35:20 2015 +0100
Revert "drm/i915: Switch planes from transitional helpers to full
atomic helpers"
The above revert switched us from full atomic helpers back to the
transitional helpers, and in doing so we lost the overflow checking here
for universal cursor updates. Even though such extreme cursor positions
are unlikely to actually happen in the wild, we still don't want there
to be a change of behavior when drivers switch from transitional helpers
to full helpers.
v2: Move check from setplane ioctl to setplane_internal rather than
adding an additional copy of the checks to the transitional plane
helpers. (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Testcase: igt/kms_cursor_crc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84269
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
nvbios_extend() returns 1 to indicate "extended the array" and 0 to
indicate the array is already big enough. This is used by the core
shadowing code to prevent re-fetching chunks of the image that have
already been shadowed.
The ACPI fetching code may possibly need to extend this further due
to requiring fetches to happen in 4KiB chunks.
Under certain circumstances (that happen if the total image size is
a multiple of 4KiB), the memory allocated to store the shadow will
already be big enough, causing the ACPI code's nvbios_extend() call
to return 0, which is misinterpreted as a failure.
The fix is simple, accept >= 0 as a successful condition here. The
core will have already made sure that we're not re-fetching data we
already have.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89047
v2 (Ben Skeggs):
- dropped hunk which would cause unnecessary re-fetching
- more descriptive explanation
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Uncertain whether the GPC pack change is due to a newer driver version,
or a legitimate difference from GM204. My GM204 has broken vram, so
can't currently try a newer binary driver on it to confirm.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Under certain circumstances the trapped address will contain subc 7,
which GK104 GR doesn't have anymore.
Notice this case to avoid causing additional priv ring faults.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
No idea if "3" is a constant or derived from something else, but the
value is unchanged in the limited traces of gm107/gm204 I have here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Make static a few functions and structures that should be.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A "return 0" found its way in the middle of the error path of
nouveau_platform_probe(), remove it as it will make the kernel crash if
we try to unload the module afterwards.
While we are at it, also remove the IOMMU domain if it has been created,
as we should.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_mm_fini() was not called when exiting the driver, resulting in a
memory leak. Fix this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On some of these chipsets, reading NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK
can trigger a PRI fault and return an error code instead of a TPC mask,
unless PGOB has been disabled first.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Before we moved gk110's implementation of this to pmu, the functions were
identical. This commit just switches GK208 to use the new (more complete)
implementation of the power-up sequence.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Turns out the PTHERM part of this dance is bracketed by the same PMU
fiddling that occurs on GK104/6, let's assume it's also PGOB.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If a memory allocation fails when using the DMA allocator,
gk20a_instobj_dtor_dma() will be called on the failed instmem object.
At this time, node->handle might not be NULL despite the call to
dma_alloc_attrs() having failed. node->cpuaddr is the right member to
check for such a failure, so use it instead.
Reported-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
User-space use mappable BOs notably for fences, and expects that a
value update by the GPU will be immediatly visible through the
user-space mapping.
ARM has a property that may prevent this from happening though: memory
can be mapped multiple times only if the different mappings share the
same caching properties. However all the lowmem memory is already
identity-mapped into the kernel with cache enabled, so when user-space
requests an uncached mapping, we actually get an "undefined caching
policy" one and this has strange side-effects described on Freedesktop
bug 86690.
To prevent this from happening, allow user-space to explicitly specify
which objects should be coherent, and create such objects with the
TTM_PL_FLAG_UNCACHED flag. This will make TTM allocate memory using the
DMA API, which will fix the identify mapping and allow us to safely map
the objects to user-space uncached.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Let GK20A's instmem take advantage of the IOMMU if it is present. Having
an IOMMU means that instmem is no longer allocated using the DMA API,
but instead obtained through page_alloc and made contiguous to the GPU
by IOMMU mappings.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tegra SoCs have an IOMMU that can be used to present non-contiguous
physical memory as contiguous to the GPU and maximize the use of large
pages in the GPU MMU, leading to performance gains. This patch adds
support for probing such a IOMMU if present and make its properties
available in the nouveau_platform_gpu structure so subsystems can take
advantage of it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
instmem for GK20A is allocated using dma_alloc_coherent(), which
provides us with a coherent CPU mapping that we never use because
instmem objects are accessed through PRAMIN. Switch to
dma_alloc_attrs() which gives us the option to dismiss that CPU mapping
and free up some CPU virtual space.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that Nouveau can operate even when there is no RAM device, remove
the dummy one used by GK20A.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GK20A does not have dedicated RAM, thus having a RAM device for it does
not make sense. Move the contiguous physical memory allocation to
instmem.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having a RAM device does not make sense for chips like GK20A which have
no dedicated video memory. The dummy RAM device that we used so far
works as a temporary band-aid, but in the longer term it is desirable
for the driver to be able to work without any kind of VRAM.
This patch adds a few conditionals in places where a RAM device was
assumed to be present and allows some more objects to be allocated from
the TT domain, allowing Nouveau to handle GPUs for which
pfb->ram == NULL.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Notify interrupt is only used for cyclestats. We can just clear it and
avoid an "unknown stat" error that gets printed to dmesg otherwise.
Signed-off-by: Lauri Peltonen <lpeltonen@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Other methods in this file suggest this is the correct way to retrieve
the engine pointer.
Signed-off-by: Lauri Peltonen <lpeltonen@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This if statement is correct but it wasn't indented, so it looked like
some code was missing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Spotted by coccinelle:
drivers/gpu/drm/nouveau/core/subdev/fuse/gm107.c:50:5-8: WARNING: end returns can be simpified
Signed-off-by: Martin Peres <martin.peres@free.fr>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Another release, another set of regulator updates. Not much of it is
showing up in the code yet but there's been a lot of discussion going on
about how to enhance the regulator API to work better with modern SoCs
which have a microcontroller sitting between Linux and the hardware.
I'm hopeful that'll start to come through into mainline for v4.2 but
it's not quite there for v4.1 - what we do have (along with the usual
small updates is) is:
- Work from Bjorn Andersson on refactoring the configuration of
regulator loading interfaces to be useful for use with
microcontrollers, the existing interfaces were never actually useful
for anything as-is since nobody was willing to put enough data into
public code.
- A summary tree display in debugfs from Heiko Stübner.
- Support for act6000 regulators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVK+w1AAoJECTWi3JdVIfQeg0H/2ckXZEQWH/yzAz7JgAoSmVr
+y8pvfNLOyOVVulFI0QBOaCAoyJNXNPNqDrkYaTykMIwX4y+weoDqfH/LMiGpnXl
D3aAgdLPSWLTUMteCs9KIHesnOdjKclZUjnbskJgnmeMCW23WcX9T1lBVoLBVdlo
p+oe287rhEwF6j2t63aLwFv8QGpamgVQ/8mXXs8EK7L5E3OO262SwLaXRBAtWk30
Eb68qXrbbkrDunEL6Hjggj5pFi93M4eNfQHpzVmjidvwz1g4JpLtWHW4XpQlXoHJ
G2rlVwNFsyedT1MX2ByKhrIPu5kq5pt0/rjear34G3vuEnQm7vR3aW/38AOxffs=
=t8gT
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another release, another set of regulator updates. Not much of it is
showing up in the code yet but there's been a lot of discussion going
on about how to enhance the regulator API to work better with modern
SoCs which have a microcontroller sitting between Linux and the
hardware.
I'm hopeful that'll start to come through into mainline for v4.2 but
it's not quite there for v4.1 - what we do have (along with the usual
small updates is) is:
- work from Bjorn Andersson on refactoring the configuration of
regulator loading interfaces to be useful for use with
microcontrollers, the existing interfaces were never actually
useful for anything as-is since nobody was willing to put enough
data into public code.
- a summary tree display in debugfs from Heiko Stübner.
- support for act6000 regulators"
* tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: max8660: Handle empty regulator data
regulator: output current-limit for all regulators in summary
regulator: add a summary tree in debugfs
regulator: qcom: Tidy up probe()
regulator: qcom: Rework to single platform device
regulator: qcom: Refactor of-parsing code
regulator: qcom: Don't enable DRMS in driver
regulator: max8660: fix assignment of pdata to data that becomes dead
regulator: Defer lookup of supply to regulator_get
mfd: max77693: Remove unused structures
regulator: max77693: Let core parse DT and drop board files support
regulator: Ensure unique regulator debugfs directory names
regulator: stw481x: Remove unused fields from struct stw481x
regulator: palmas: Add has_regen3 check for TPS659038
regulator: constify of_device_id array
regulator: fixes for regulator_set_optimum_mode name change
regulator: Drop temporary regulator_set_optimum_mode wrapper
usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode
usb: phy: ab8500-usb: Rename regulator_set_optimum_mode
ufs: Rename of regulator_set_optimum_mode
...
Similar to the Intel implementation, but instead of just falling back to a
global linear list when we have an overlapping userptr request we accumulate
all overlapping userptrs in a local list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows selecting CONFIG_MMU_NOTIFIER if it isn't already selected.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some non-const pointers were added since the last constification, fix
them.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Connector states were being allocated in intel_setup_outputs() in loop
over all connectors. That meant hot-added connectors would have a NULL
state. Since the change to use a struct drm_atomic_state for the legacy
modeset, connector states are necessary for the i915 driver to function
properly, so that would lead to oopses.
Broken by
commit 944b0c7657
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri Mar 20 16:18:07 2015 +0200
drm/i915: Copy the staged connector config to the legacy atomic state
v2: Fix test for intel_connector_init() success in lvds and sdvo (PRTS)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-tested-by: Nicolas Kalkhof <nkalkhof@web.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Add media bus formats needed by imx-drm
- Switch to use media bus formats to describe the pixel format
on the internal parallel bus between display interface and
encoders
- Some preparations for TV Output via TVEv2 on i.MX5
- Add drm_panel support to the i.MX LVDS driver, allow to
determine the bus pixel format from the panel descriptor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nTVr
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm changes to use media bus formats and LDB drm_panel support
- Add media bus formats needed by imx-drm
- Switch to use media bus formats to describe the pixel format
on the internal parallel bus between display interface and
encoders
- Some preparations for TV Output via TVEv2 on i.MX5
- Add drm_panel support to the i.MX LVDS driver, allow to
determine the bus pixel format from the panel descriptor.
* tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux:
drm/imx: imx-ldb: allow to determine bus format from the connected panel
drm/imx: imx-ldb: reset display clock input when disabling LVDS
drm/imx: imx-ldb: add drm_panel support
drm/imx: consolidate bus format variable names
drm/imx: switch to use media bus formats
Add RGB666_1X24_CPADHI media bus format
Add YUV8_1X24 media bus format
Add BGR888_1X24 and GBR888_1X24 media bus formats
Add LVDS RGB media bus formats
Add RGB444_1X12 and RGB565_1X16 media bus formats
drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2
drm/imx: Add support for interlaced scanout
Convert all drm callers that use of_graph_get_next_endpoint to loop over
of-graph endpoints to the newly introduced for_each_endpoint_of_node
helper macro.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=la2O
-----END PGP SIGNATURE-----
Merge tag 'of-graph-drm-2015-04-08' of git://git.pengutronix.de/git/pza/linux into drm-next
drm: Use of-graph helpers to loop over endpoints
Convert all drm callers that use of_graph_get_next_endpoint to loop over
of-graph endpoints to the newly introduced for_each_endpoint_of_node
helper macro.
* tag 'of-graph-drm-2015-04-08' of git://git.pengutronix.de/git/pza/linux:
drm/rockchip: use for_each_endpoint_of_node macro, drop endpoint reference on break
drm/rcar-du: use for_each_endpoint_of_node macro
drm/imx: use for_each_endpoint_of_node macro in imx_drm_encoder_get_mux_id
drm: use for_each_endpoint_of_node macro in drm_of_find_possible_crtcs
of: Explicitly include linux/types.h in of_graph.h
dt-bindings: brcm: rationalize Broadcom documentation naming
of/unittest: replace 'selftest' with 'unittest'
Documentation: rename of_selftest.txt to of_unittest.txt
Documentation: update the of_selftest.txt
dt: OF_UNITTEST make dependency broken
MAINTAINERS: Pantelis Antoniou device tree overlay maintainer
of: Add of_graph_get_port_by_id function
of: Add for_each_endpoint_of_node helper macro
of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
Commit adacb228d7 ("drm: Exynos: Respect framebuffer pitch for
FIMD/Mixer") fixed the buffer size calculation by using the FB
pitch value but later commit 26b9c2813ede1 ("drm/exynos: remove
struct *_win_data abstraction on planes") added a regression so
fix the buffer size calculation again.
Tested on Chromebook Snow / Peach Pit.
Fixes: 26b9c2813ede1 ("drm/exynos: remove struct *_win_data abstraction on planes")
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
After adding display power domain for Exynos5250 in commit
2d2c9a8d0a ("ARM: dts: add display power domain for exynos5250") the
display on Chromebook Snow and others stopped working after boot.
The reason for this suggested Andrzej Hajda: the DP clock was disabled.
This clock is required by Display Port and is enabled by bootloader.
However when FIMD driver probing was deferred, the display power domain
was turned off. This effectively reset the value of DP clock enable
register.
When exynos-dp is later probed, the clock is not enabled and display is
not properly configured:
exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok
exynos-dp 145b0000.dp-controller: unable to config video
Fixes: 2d2c9a8d0a ("ARM: dts: add display power domain for exynos5250")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
>From the commit "drm/exynos: fix the execution order in FIMD
initialization" (598285bfdce46d7c47632a2ba4b980f60be4a677), the error
checking code is removed improperly. This patch fix the regression.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Because the helper function which calls this callback checks whether
it is registered or not. It is not necessary if it does nothing.
So it would be better to remove the function for clarity.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Calculation ratio from exynos_drm plane codes, then each hw drivers can
use it without extra operation. Also this fixes width and height of
source used for actual crtc shown via screen.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's more reasonable to use src_x and src_y to represent source as
counterpart of destination(crtc). Already we are using src_width and
src_height for width and height of source.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
While the VP (video processor) supports arbitrary scaling
of its input, the mixer just supports a simple 2x (line
doubling) scaling. Expose this functionality and exit
early when an unsupported scaling configuration is
encountered.
This was tested with modetest's DRM plane test (from
the libdrm test suite) on an Odroid-X2 (Exynos4412).
v2: Put if- and return-statement on different lines.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The messages are redundant since 'check_fb_gem_memory_type'
already prints out exactly the same string when it fails.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
As for now there is no validation of incoming buffer
enqueue request as far as the gem buffers are being
concerned. This might lead to some undesired cases
when the driver tries to operate on invalid buffers
(wiht no valid gem object handle i.e.).
Add some basic checks to rule out those potential issues.
Signed-off-by: Beata Michalska <b.michalska@samsung.com>
[mszyprow: rebased onto v4.0-rc1 and adapted to recent ipp changes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The goal of the change is to make sure we send the vblank event on the
current vblank. My hope is to fix any races that might be causing flicker.
After this change I only see a flicker in the transition plymouth and
X11.
Simplified the code by tracking vblank events on a per-crtc basis. This
allowed me to remove all error paths from the callback. It also allowed
me to remove the vblank wait from the callback.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
These functions were already removed by previous cleanup work, but these
ones were left behind.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The .destroy() callback for exynos can be replaced by drm_plane_cleanup().
The only extra operation on exynos_plane_destroy() was a call to
exynos_plane_disable() but the plane is already disabled by a earlier call
to drm_framebuffer_remove().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
