The xfstest btrfs/014 which tests the balance operation caused issues with
the check_int module. The attempt was made to use btrfs_map_block() to
find the physical location for a written block. However, this was not
at all needed since the location of the written block was known since
a hook to submit_bio() was the reason for entering the check_int module.
Additionally, after a block relocation it happened that btrfs_map_block()
failed causing misleading error messages afterwards.
This patch changes the check_int module to use the known information of
the physical location from the bio.
Reported-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Tested-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
We try to allocate an extent state before acquiring the tree's spinlock
just in case we end up needing to split an existing extent state into two.
If that allocation failed, we would return -ENOMEM.
However, our only single caller (transaction/log commit code), passes in
an extent state that was cached from a call to find_first_extent_bit() and
that has a very high chance to match exactly the input range (always true
for a transaction commit and very often, but not always, true for a log
commit) - in this case we end up not needing at all that initial extent
state used for an eventual split. Therefore just don't return -ENOMEM if
we can't allocate the temporary extent state, since we might not need it
at all, and if we end up needing one, we'll do it later anyway.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Right now the only caller of find_first_extent_bit() that is interested
in caching extent states (transaction or log commit), never gets an extent
state cached. This is because find_first_extent_bit() only caches states
that have at least one of the flags EXTENT_IOBITS or EXTENT_BOUNDARY, and
the transaction/log commit caller always passes a tree that doesn't have
ever extent states with any of those flags (they can only have one of the
following flags: EXTENT_DIRTY, EXTENT_NEW or EXTENT_NEED_WAIT).
This change together with the following one in the patch series (titled
"Btrfs: avoid returning -ENOMEM in convert_extent_bit() too early") will
help reduce significantly the chances of calls to convert_extent_bit()
fail with -ENOMEM when called from the transaction/log commit code.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When committing a transaction or a log, we look for btree extents that
need to be durably persisted by searching for ranges in a io tree that
have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear
those bits and set the EXTENT_NEED_WAIT bit, with calls to the function
convert_extent_bit, and then start writeback for the extents.
That function however can return an error (at the moment only -ENOMEM
is possible, specially when it does GFP_ATOMIC allocation requests
through alloc_extent_state_atomic) - that means the ranges didn't got
the EXTENT_NEED_WAIT bit set (or at least not for the whole range),
which in turn means a call to btrfs_wait_marked_extents() won't find
those ranges for which we started writeback, causing a transaction
commit or a log commit to persist a new superblock without waiting
for the writeback of extents in that range to finish first.
Therefore if a crash happens after persisting the new superblock and
before writeback finishes, we have a superblock pointing to roots that
weren't fully persisted or roots that point to nodes or leafs that weren't
fully persisted, causing all sorts of unexpected/bad behaviour as we endup
reading garbage from disk or the content of some node/leaf from a past
generation that got cowed or deleted and is no longer valid (for this later
case we end up getting error messages like "parent transid verify failed on
X wanted Y found Z" when reading btree nodes/leafs from disk).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
device replace could fail due to another running scrub process or any
other errors btrfs_scrub_dev() may hit, but this failure doesn't get
returned to userspace.
The following steps could reproduce this issue
mkfs -t btrfs -f /dev/sdb1 /dev/sdb2
mount /dev/sdb1 /mnt/btrfs
while true; do btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1; done &
btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs
# if this replace succeeded, do the following and repeat until
# you see this log in dmesg
# BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115
#btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs
# once you see the error log in dmesg, check return value of
# replace
echo $?
Introduce a new dev replace result
BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS
to catch -EINPROGRESS explicitly and return other errors directly to
userspace.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
size of @btrfsic_state needs more than 2M, it is very likely to
fail allocating memory using kzalloc(). see following mesage:
[91428.902148] Call Trace:
[<ffffffff816f6e0f>] dump_stack+0x4d/0x66
[<ffffffff811b1c7f>] warn_alloc_failed+0xff/0x170
[<ffffffff811b66e1>] __alloc_pages_nodemask+0x951/0xc30
[<ffffffff811fd9da>] alloc_pages_current+0x11a/0x1f0
[<ffffffff811b1e0b>] ? alloc_kmem_pages+0x3b/0xf0
[<ffffffff811b1e0b>] alloc_kmem_pages+0x3b/0xf0
[<ffffffff811d1018>] kmalloc_order+0x18/0x50
[<ffffffff811d1074>] kmalloc_order_trace+0x24/0x140
[<ffffffffa06c097b>] btrfsic_mount+0x8b/0xae0 [btrfs]
[<ffffffff810af555>] ? check_preempt_curr+0x85/0xa0
[<ffffffff810b2de3>] ? try_to_wake_up+0x103/0x430
[<ffffffffa063d200>] open_ctree+0x1bd0/0x2130 [btrfs]
[<ffffffffa060fdde>] btrfs_mount+0x62e/0x8b0 [btrfs]
[<ffffffff811fd9da>] ? alloc_pages_current+0x11a/0x1f0
[<ffffffff811b0a5e>] ? __get_free_pages+0xe/0x50
[<ffffffff81230429>] mount_fs+0x39/0x1b0
[<ffffffff812509fb>] vfs_kern_mount+0x6b/0x150
[<ffffffff812537fb>] do_mount+0x27b/0xc30
[<ffffffff811b0a5e>] ? __get_free_pages+0xe/0x50
[<ffffffff812544f6>] SyS_mount+0x96/0xf0
[<ffffffff81701970>] system_call_fastpath+0x16/0x1b
Since we are allocating memory for hash table array, so
it will be good if we could allocate continuous pages here.
Fix this problem by firstly trying kzalloc(), if we fail,
use vzalloc() instead.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
If cow_file_range_inline() failed, when called from compress_file_range(),
we were tagging the locked page for writeback, end its writeback and unlock it,
but not marking it with an error nor setting AS_EIO in inode's mapping flags.
This made it impossible for a caller of filemap_fdatawrite_range (writepages)
or filemap_fdatawait_range() to know that an error happened. And the return
value of compress_file_range() is useless because it's returned to a workqueue
task and not to the task calling filemap_fdatawrite_range (writepages).
This change applies on top of the previous patchset starting at the patch
titled:
"[1/5] Btrfs: set page and mapping error on compressed write failure"
Which changed extent_clear_unlock_delalloc() to use SetPageError and
mapping_set_error().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
To avoid duplicating this double filemap_fdatawrite_range() call for
inodes with async extents (compressed writes) so often.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
For compressed writes, after doing the first filemap_fdatawrite_range() we
don't get the pages tagged for writeback immediately. Instead we create
a workqueue task, which is run by other kthread, and keep the pages locked.
That other kthread compresses data, creates the respective ordered extent/s,
tags the pages for writeback and unlocks them. Therefore we need a second
call to filemap_fdatawrite_range() if we have compressed writes, as this
second call will wait for the pages to become unlocked, then see they became
tagged for writeback and finally wait for the writeback to finish.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Its return value is useless, its single caller ignores it and can't do
anything with it anyway, since it's a workqueue task and not the task
calling filemap_fdatawrite_range (writepages) nor filemap_fdatawait_range().
Failure is communicated to such functions via start and end of writeback
with the respective pages tagged with an error and AS_EIO flag set in the
inode's imapping.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
# mkfs.btrfs -f /dev/sdb
# mount -t btrfs /dev/sdb /mnt -o compress=lzo
# dd if=/dev/zero of=/mnt/data bs=$((33*4096)) count=1
after previous steps, inode will be detected as bad compression ratio,
and NOCOMPRESS flag will be set for that inode.
Reason is that compress have a max limit pages every time(128K), if a
132k write in, it will be splitted into two write(128k+4k), this bug
is a leftover for commit 68bb462d42a(Btrfs: don't compress for a small write)
Fix this problem by checking every time before compression, if it is a
small write(<=blocksize), we bail out and fall into nocompression directly.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Our compressed bio write end callback was essentially ignoring the error
parameter. When a write error happens, it must pass a value of 0 to the
inode's write_page_end_io_hook callback, SetPageError on the respective
pages and set AS_EIO in the inode's mapping flags, so that a call to
filemap_fdatawait_range() / filemap_fdatawait() can find out that errors
happened (we surely don't want silent failures on fsync for example).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Its return value is completely ignored by its single caller and it's
useless anyway, since errors are indicated through SetPageError and
the bit AS_EIO set in the flags of the inode's mapping. The caller
can't do anything with the value, as it's invoked from a workqueue
task and not by the task calling filemap_fdatawrite_range (which calls
the writepages address space callback, which in turn calls the inode's
fill_delalloc callback).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we had an error when processing one of the async extents from our list,
we were not processing the remaining async extents, meaning we would leak
those async_extent structs, never release the pages with the compressed
data and never unlock and clear the dirty flag from the inode's pages (those
that correspond to the uncompressed content).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In inode.c:submit_compressed_extents(), if we fail before calling
btrfs_submit_compressed_write(), or when that function fails, we
were freeing the async_extent structure without releasing its pages
and freeing the pages array.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In inode.c:submit_compressed_extents(), before calling btrfs_submit_compressed_write()
we start writeback for all pages, clear their dirty flag, unlock them, etc, but if
btrfs_submit_compressed_write() fails (at the moment it can only fail with -ENOMEM),
we never end the writeback on the pages, so any filemap_fdatawait_range() call will
hang forever. We were also not calling the writepage end io hook, which means the
corresponding ordered extent will never complete and all its waiters will block
forever, such as a full fsync (via btrfs_wait_ordered_range()).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we fail in submit_compressed_extents() before calling btrfs_submit_compressed_write(),
we start and end the writeback for the pages (clear their dirty flag, unlock them, etc)
but we don't tag the pages, nor the inode's mapping, with an error. This makes it
impossible for a caller of filemap_fdatawait_range() (fsync, or transaction commit
for e.g.) know that there was an error.
Note that the return value of submit_compressed_extents() is useless, as that function
is executed by a workqueue task and not directly by the fill_delalloc callback. This
means the writepage/s callbacks of the inode's address space operations don't get that
return value.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The fair reader/writer locks mean that btrfs_clear_path_blocking needs
to strictly follow lock ordering rules even when we already have
blocking locks on a given path.
Before we can clear a blocking lock on the path, we need to make sure
all of the locks have been converted to blocking. This will remove lock
inversions against anyone spinning in write_lock() against the buffers
we're trying to get read locks on. These inversions didn't exist before
the fair read/writer locks, but now we need to be more careful.
We papered over this deadlock in the past by changing
btrfs_try_read_lock() to be a true trylock against both the spinlock and
the blocking lock. This was slower, and not sufficient to fix all the
deadlocks. This patch adds a btrfs_tree_read_lock_atomic(), which
basically means get the spinlock but trylock on the blocking lock.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: Patrick Schmid <schmid@phys.ethz.ch>
cc: stable@vger.kernel.org #v3.15+
In some contexts, like in sysfs handlers, we don't want to trigger a
transaction commit. It's a heavy operation, we don't know what external
locks may be taken. Instead, make it possible to finish the operation
through sync syscall or SYNC_FS ioctl.
Signed-off-by: David Sterba <dsterba@suse.cz>
The pending mount option(s) now share namespace and bits with the normal
options, and the existing one for (inode_cache) is unset unconditionally
at each transaction commit.
Introduce a separate namespace for pending changes and enhance the
descriptions of the intended change to use separate bits for each
action.
Signed-off-by: David Sterba <dsterba@suse.cz>
If a pending change is requested, it's not processed unless there is a
transaction commit about to happen, not even after sync or SYNC_FS
ioctl. For example a remount that toggles the inode_cache option will
not take effect after sync on a quiescent filesystem.
Signed-off-by: David Sterba <dsterba@suse.cz>
There are some actions that modify global filesystem state but cannot be
performed at the time of request, but later at the transaction commit
time when the filesystem is in a known state.
For example enabling new incompat features on-the-fly or issuing
transaction commit from unsafe contexts (sysfs handlers).
Signed-off-by: David Sterba <dsterba@suse.cz>
Pull btrfs fix from Chris Mason:
"It's a one liner for an error cleanup path that leads to crashes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
If we hit any errors in btrfs_lookup_csums_range, we'll loop through all
the csums we allocate and free them. But the code was using list_entry
incorrectly, and ended up trying to free the on-stack list_head instead.
This bug came from commit 0678b6185
btrfs: Don't BUG_ON kzalloc error in btrfs_lookup_csums_range()
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Erik Berg <btrfs@slipsprogrammoer.no>
cc: stable@vger.kernel.org # 3.3 or newer
Pull btrfs fixes from Chris Mason:
"Filipe is nailing down some problems with our skinny extent variation,
and Dave's patch fixes endian problems in the new super block checks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix race that makes btrfs_lookup_extent_info miss skinny extent items
Btrfs: properly clean up btrfs_end_io_wq_cache
Btrfs: fix invalid leaf slot access in btrfs_lookup_extent()
btrfs: use macro accessors in superblock validation checks
We have a race that can lead us to miss skinny extent items in the function
btrfs_lookup_extent_info() when the skinny metadata feature is enabled.
So basically the sequence of steps is:
1) We search in the extent tree for the skinny extent, which returns > 0
(not found);
2) We check the previous item in the returned leaf for a non-skinny extent,
and we don't find it;
3) Because we didn't find the non-skinny extent in step 2), we release our
path to search the extent tree again, but this time for a non-skinny
extent key;
4) Right after we released our path in step 3), a skinny extent was inserted
in the extent tree (delayed refs were run) - our second extent tree search
will miss it, because it's not looking for a skinny extent;
5) After the second search returned (with ret > 0), we look for any delayed
ref for our extent's bytenr (and we do it while holding a read lock on the
leaf), but we won't find any, as such delayed ref had just run and completed
after we released out path in step 3) before doing the second search.
Fix this by removing completely the path release and re-search logic. This is
safe, because if we seach for a metadata item and we don't find it, we have the
guarantee that the returned leaf is the one where the item would be inserted,
and so path->slots[0] > 0 and path->slots[0] - 1 must be the slot where the
non-skinny extent item is if it exists. The only case where path->slots[0] is
zero is when there are no smaller keys in the tree (i.e. no left siblings for
our leaf), in which case the re-search logic isn't needed as well.
This race has been present since the introduction of skinny metadata (change
3173a18f70).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
In one of Dave's cleanup commits he forgot to call btrfs_end_io_wq_exit on
unload, which makes us unable to unload and then re-load the btrfs module. This
fixes the problem. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we couldn't find our extent item, we accessed the current slot
(path->slots[0]) to check if it corresponds to an equivalent skinny
metadata item. However this slot could be beyond our last item in the
leaf (i.e. path->slots[0] >= btrfs_header_nritems(leaf)), in which case
we shouldn't process it.
Since btrfs_lookup_extent() is only used to find extent items for data
extents, fix this by removing completely the logic that looks up for an
equivalent skinny metadata item, since it can not exist.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The initial patch c926093ec5 (btrfs: add more superblock checks)
did not properly use the macro accessors that wrap endianness and the
code would not work correctly on big endian machines.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
It's already duplicated in btrfs and about to be used in overlayfs too.
Move the sticky bit check to an inline helper and call the out-of-line
helper only in the unlikly case of the sticky bit being set.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Pull btrfs data corruption fix from Chris Mason:
"I'm testing a pull with more fixes, but wanted to get this one out so
Greg can pick it up.
The corruption isn't easy to hit, you have to do a readonly snapshot
and have orphans in the snapshot. But my review and testing missed
the bug. Filipe has added a better xfstest to cover it"
* 'for-linus-update' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "Btrfs: race free update of commit root for ro snapshots"
Pull core block layer changes from Jens Axboe:
"This is the core block IO pull request for 3.18. Apart from the new
and improved flush machinery for blk-mq, this is all mostly bug fixes
and cleanups.
- blk-mq timeout updates and fixes from Christoph.
- Removal of REQ_END, also from Christoph. We pass it through the
->queue_rq() hook for blk-mq instead, freeing up one of the request
bits. The space was overly tight on 32-bit, so Martin also killed
REQ_KERNEL since it's no longer used.
- blk integrity updates and fixes from Martin and Gu Zheng.
- Update to the flush machinery for blk-mq from Ming Lei. Now we
have a per hardware context flush request, which both cleans up the
code should scale better for flush intensive workloads on blk-mq.
- Improve the error printing, from Rob Elliott.
- Backing device improvements and cleanups from Tejun.
- Fixup of a misplaced rq_complete() tracepoint from Hannes.
- Make blk_get_request() return error pointers, fixing up issues
where we NULL deref when a device goes bad or missing. From Joe
Lawrence.
- Prep work for drastically reducing the memory consumption of dm
devices from Junichi Nomura. This allows creating clone bio sets
without preallocating a lot of memory.
- Fix a blk-mq hang on certain combinations of queue depths and
hardware queues from me.
- Limit memory consumption for blk-mq devices for crash dump
scenarios and drivers that use crazy high depths (certain SCSI
shared tag setups). We now just use a single queue and limited
depth for that"
* 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits)
block: Remove REQ_KERNEL
blk-mq: allocate cpumask on the home node
bio-integrity: remove the needless fail handle of bip_slab creating
block: include func name in __get_request prints
block: make blk_update_request print prefix match ratelimited prefix
blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio
block: fix alignment_offset math that assumes io_min is a power-of-2
blk-mq: Make bt_clear_tag() easier to read
blk-mq: fix potential hang if rolling wakeup depth is too high
block: add bioset_create_nobvec()
block: use bio_clone_fast() in blk_rq_prep_clone()
block: misplaced rq_complete tracepoint
sd: Honor block layer integrity handling flags
block: Replace strnicmp with strncasecmp
block: Add T10 Protection Information functions
block: Don't merge requests if integrity flags differ
block: Integrity checksum flag
block: Relocate bio integrity flags
block: Add a disk flag to block integrity profile
block: Add prefix to block integrity profile flags
...
This reverts commit 9c3b306e1c.
Switching only one commit root during a transaction is wrong because it
leads the fs into an inconsistent state. All commit roots should be
switched at once, at transaction commit time, otherwise backref walking
can often miss important references that were only accessible through
the old commit root. Plus, the root item for the snapshot's root wasn't
getting updated and preventing the next transaction commit to do it.
This made several users get into random corruption issues after creation
of readonly snapshots.
A regression test for xfstests will follow soon.
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99
compliant equivalent. This patch instead allocates the appropriate amount of
memory using a char array using the SHASH_DESC_ON_STACK macro.
The new code can be compiled with both gcc and clang.
Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Pull vfs updates from Al Viro:
"The big thing in this pile is Eric's unmount-on-rmdir series; we
finally have everything we need for that. The final piece of prereqs
is delayed mntput() - now filesystem shutdown always happens on
shallow stack.
Other than that, we have several new primitives for iov_iter (Matt
Wilcox, culled from his XIP-related series) pushing the conversion to
->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
cleanups and fixes (including the external name refcounting, which
gives consistent behaviour of d_move() wrt procfs symlinks for long
and short names alike) and assorted cleanups and fixes all over the
place.
This is just the first pile; there's a lot of stuff from various
people that ought to go in this window. Starting with
unionmount/overlayfs mess... ;-/"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
fs/file_table.c: Update alloc_file() comment
vfs: Deduplicate code shared by xattr system calls operating on paths
reiserfs: remove pointless forward declaration of struct nameidata
don't need that forward declaration of struct nameidata in dcache.h anymore
take dname_external() into fs/dcache.c
let path_init() failures treated the same way as subsequent link_path_walk()
fix misuses of f_count() in ppp and netlink
ncpfs: use list_for_each_entry() for d_subdirs walk
vfs: move getname() from callers to do_mount()
gfs2_atomic_open(): skip lookups on hashed dentry
[infiniband] remove pointless assignments
gadgetfs: saner API for gadgetfs_create_file()
f_fs: saner API for ffs_sb_create_file()
jfs: don't hash direct inode
[s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
ecryptfs: ->f_op is never NULL
android: ->f_op is never NULL
nouveau: __iomem misannotations
missing annotation in fs/file.c
fs: namespace: suppress 'may be used uninitialized' warnings
...
Pull btrfs updates from Chris Mason:
"The largest set of changes here come from Miao Xie. He's cleaning up
and improving read recovery/repair for raid, and has a number of
related fixes.
I've merged another set of fsync fixes from Filipe, and he's also
improved the way we handle metadata write errors to make sure we force
the FS readonly if things go wrong.
Otherwise we have a collection of fixes and cleanups. Dave Sterba
gets a cookie for removing the most lines (thanks Dave)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (139 commits)
btrfs: Fix compile error when CONFIG_SECURITY is not set.
Btrfs: fix compiles when CONFIG_BTRFS_FS_RUN_SANITY_TESTS is off
btrfs: Make btrfs handle security mount options internally to avoid losing security label.
Btrfs: send, don't delay dir move if there's a new parent inode
btrfs: add more superblock checks
Btrfs: fix race in WAIT_SYNC ioctl
Btrfs: be aware of btree inode write errors to avoid fs corruption
Btrfs: remove redundant btrfs_verify_qgroup_counts declaration.
btrfs: fix shadow warning on cmp
Btrfs: fix compilation errors under DEBUG
Btrfs: fix crash of btrfs_release_extent_buffer_page
Btrfs: add missing end_page_writeback on submit_extent_page failure
btrfs: Fix the wrong condition judgment about subset extent map
Btrfs: fix build_backref_tree issue with multiple shared blocks
Btrfs: cleanup error handling in build_backref_tree
btrfs: move checks for DUMMY_ROOT into a helper
btrfs: new define for the inline extent data start
btrfs: kill extent_buffer_page helper
btrfs: drop constant param from btrfs_release_extent_buffer_page
btrfs: hide typecast to definition of BTRFS_SEND_TRANS_STUB
...
Pull percpu updates from Tejun Heo:
"A lot of activities on percpu front. Notable changes are...
- percpu allocator now can take @gfp. If @gfp doesn't contain
GFP_KERNEL, it tries to allocate from what's already available to
the allocator and a work item tries to keep the reserve around
certain level so that these atomic allocations usually succeed.
This will replace the ad-hoc percpu memory pool used by
blk-throttle and also be used by the planned blkcg support for
writeback IOs.
Please note that I noticed a bug in how @gfp is interpreted while
preparing this pull request and applied the fix 6ae833c7fe
("percpu: fix how @gfp is interpreted by the percpu allocator")
just now.
- percpu_ref now uses longs for percpu and global counters instead of
ints. It leads to more sparse packing of the percpu counters on
64bit machines but the overhead should be negligible and this
allows using percpu_ref for refcnting pages and in-memory objects
directly.
- The switching between percpu and single counter modes of a
percpu_ref is made independent of putting the base ref and a
percpu_ref can now optionally be initialized in single or killed
mode. This allows avoiding percpu shutdown latency for cases where
the refcounted objects may be synchronously created and destroyed
in rapid succession with only a fraction of them reaching fully
operational status (SCSI probing does this when combined with
blk-mq support). It's also planned to be used to implement forced
single mode to detect underflow more timely for debugging.
There's a separate branch percpu/for-3.18-consistent-ops which cleans
up the duplicate percpu accessors. That branch causes a number of
conflicts with s390 and other trees. I'll send a separate pull
request w/ resolutions once other branches are merged"
* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
percpu: fix how @gfp is interpreted by the percpu allocator
blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
percpu_ref: add PERCPU_REF_INIT_* flags
percpu_ref: decouple switching to percpu mode and reinit
percpu_ref: decouple switching to atomic mode and killing
percpu_ref: add PCPU_REF_DEAD
percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
percpu_ref: replace pcpu_ prefix with percpu_
percpu_ref: minor code and comment updates
percpu_ref: relocate percpu_ref_reinit()
Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
Revert "percpu: free percpu allocation info for uniprocessor system"
percpu-refcount: make percpu_ref based on longs instead of ints
percpu-refcount: improve WARN messages
percpu: fix locking regression in the failure path of pcpu_alloc()
percpu-refcount: add @gfp to percpu_ref_init()
proportions: add @gfp to init functions
percpu_counter: add @gfp to percpu_counter_init()
percpu_counter: make percpu_counters_lock irq-safe
...
Now that d_invalidate can no longer fail, stop returning a useless
return code. For the few callers that checked the return code update
remove the handling of d_invalidate failure.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix the following compile error when CONFIG_SECURITY is not set:
error: 'struct security_mnt_opts' has no member named 'num_mnt_opts'
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit fccb84c94 moved added some helpers to cleanup our sanity tests,
but it looks like both Dave and I always compile with the tests enabled.
This fixes things to work when they are turned off too.
Signed-off-by: Chris Mason <clm@fb.com>
[BUG]
Originally when mount btrfs with "-o subvol=" mount option, btrfs will
lose all security lable.
And if the btrfs fs is mounted somewhere else, due to the lost of
security lable, SELinux will refuse to mount since the same super block
is being mounted using different security lable.
[REPRODUCER]
With SELinux enabled:
#mkfs -t btrfs /dev/sda5
#mount -o context=system_u:object_r:nfs_t:s0 /dev/sda5 /mnt/btrfs
#btrfs subvolume create /mnt/btrfs/subvol
#mount -o subvol=subvol,context=system_u:object_r:nfs_t:s0 /dev/sda5
/mnt/test
kernel message:
SELinux: mount invalid. Same superblock, different security settings
for (dev sda5, type btrfs)
[REASON]
This happens because btrfs will call vfs_kern_mount() and then
mount_subtree() to handle subvolume name lookup.
First mount will cut off all the security lables and when it comes to
the second vfs_kern_mount(), it has no security label now.
[FIX]
This patch will makes btrfs behavior much more like nfs,
which has the type flag FS_BINARY_MOUNTDATA,
making btrfs handles the security label internally.
So security label will be set in the real mount time and won't lose
label when use with "subvol=" mount option.
Reported-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If between two snapshots we rename an existing directory named X to Y and
make it a child (direct or not) of a new inode named X, we were delaying
the move/rename of the former directory unnecessarily, which would result
in attempting to rename the new directory from its orphan name to name X
prematurely.
Minimal reproducer:
$ mkfs.btrfs -f /dev/vdd
$ mount /dev/vdd /mnt
$ mkdir -p /mnt/merlin/RC/OSD/Source
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
$ mkdir /mnt/OSD
$ mv /mnt/merlin/RC/OSD /mnt/OSD/OSD-Plane_788
$ mv /mnt/OSD /mnt/merlin/RC
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap2
$ btrfs send /mnt/mysnap1 -f /tmp/1.snap
$ btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/2.snap
$ mkfs.btrfs -f /dev/vdc
$ mount /dev/vdc /mnt2
$ btrfs receive /mnt2 -f /tmp/1.snap
$ btrfs receive /mnt2 -f /tmp/2.snap
The second receive (from an incremental send) failed with the following
error message: "rename o261-7-0 -> merlin/RC/OSD failed".
This is a regression introduced in the 3.16 kernel.
A test case for xfstests follows.
Reported-by: Marc Merlin <marc@merlins.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Populate btrfs_check_super_valid() with checks that try to verify
consistency of superblock by additional conditions that may arise from
corrupted devices or bitflips. Some of tests are only hints and issue
warnings instead of failing the mount, basically when the checks are
derived from the data found in the superblock.
Tested on a broken image provided by Qu.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
We check whether transid is already committed via last_trans_committed and
then search through trans_list for pending transactions. If
last_trans_committed is updated by btrfs_commit_transaction after we check
it (there is no locking), we will fail to find the committed transaction
and return EINVAL to the caller. This has been observed occasionally by
ceph-osd (which uses this ioctl heavily).
Fix by rechecking whether the provided transid <= last_trans_committed
after the search fails, and if so return 0.
Signed-off-by: Sage Weil <sage@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
While we have a transaction ongoing, the VM might decide at any time
to call btree_inode->i_mapping->a_ops->writepages(), which will start
writeback of dirty pages belonging to btree nodes/leafs. This call
might return an error or the writeback might finish with an error
before we attempt to commit the running transaction. If this happens,
we might have no way of knowing that such error happened when we are
committing the transaction - because the pages might no longer be
marked dirty nor tagged for writeback (if a subsequent modification
to the extent buffer didn't happen before the transaction commit) which
makes filemap_fdata[write|wait]_range unable to find such pages (even
if they're marked with SetPageError).
So if this happens we must abort the transaction, otherwise we commit
a super block with btree roots that point to btree nodes/leafs whose
content on disk is invalid - either garbage or the content of some
node/leaf from a past generation that got cowed or deleted and is no
longer valid (for this later case we end up getting error messages like
"parent transid verify failed on 10826481664 wanted 25748 found 29562"
when reading btree nodes/leafs from disk).
Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's
i_mapping would not be enough because we need to distinguish between
log tree extents (not fatal) vs non-log tree extents (fatal) and
because the next call to filemap_fdatawait_range() will catch and clear
such errors in the mapping - and that call might be from a log sync and
not from a transaction commit, which means we would not know about the
error at transaction commit time. Also, checking for the eb flag
EXTENT_BUFFER_IOERR at transaction commit time isn't done and would
not be completely reliable, as the eb might be removed from memory and
read back when trying to get it, which clears that flag right before
reading the eb's pages from disk, making us not know about the previous
write error.
Using the new 3 flags for the btree inode also makes us achieve the
goal of AS_EIO/AS_ENOSPC when writepages() returns success, started
writeback for all dirty pages and before filemap_fdatawait_range() is
called, the writeback for all dirty pages had already finished with
errors - because we were not using AS_EIO/AS_ENOSPC,
filemap_fdatawait_range() would return success, as it could not know
that writeback errors happened (the pages were no longer tagged for
writeback).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Do like disk-io function declared under CONFIG_BTRFS_FS_RUN_SANITY_TESTS
and keep prototype in qgroup.h only
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Chris Mason <clm@fb.com>
cmp was declared twice in btrfs_compare_trees resulting in a shadow
warning. This patch renames second internal variable.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Chris Mason <clm@fb.com>
bi_sector and bi_size moved to bi_iter since commit 4f024f3797
("block: Abstract out bvec iterator")
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Chris Mason <clm@fb.com>
This is actually inspired by Filipe's patch. When write_one_eb() fails on
submit_extent_page(), it'll give up writing this eb and mark it with
EXTENT_BUFFER_IOERR. So if it's not the last page that encounter the failure,
there are some left pages which remain DIRTY, and if a later COW on this eb
happens, ie. eb is COWed and freed, it'd run into BUG_ON in
btrfs_release_extent_buffer_page() for the DIRTY page, ie. BUG_ON(PageDirty(page));
This adds the missing clear_page_dirty_for_io() for the rest pages of eb.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If submit_extent_page() fails in write_one_eb(), we end up with the current
page not marked dirty anymore, unlocked and marked for writeback. But we never
end up calling end_page_writeback() against the page, which will make calls to
filemap_fdatawait_range (e.g. at transaction commit time) hang forever waiting
for the writeback bit to be cleared from the page.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Previous commit: btrfs: Fix and enhance merge_extent_mapping() to insert
best fitted extent map
is using wrong condition to judgement whether the range is a subset of a
existing extent map.
This may cause bug in btrfs no-holes mode.
This patch will correct the judgment and fix the bug.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Marc Merlin sent me a broken fs image months ago where it would blow up in the
upper->checked BUG_ON() in build_backref_tree. This is because we had a
scenario like this
block a -- level 4 (not shared)
|
block b -- level 3 (reloc block, shared)
|
block c -- level 2 (not shared)
|
block d -- level 1 (shared)
|
block e -- level 0 (shared)
We go to build a backref tree for block e, we notice block d is shared and add
it to the list of blocks to lookup it's backrefs for. Now when we loop around
we will check edges for the block, so we will see we looked up block c last
time. So we lookup block d and then see that the block that points to it is
block c and we can just skip that edge since we've already been up this path.
The problem is because we clear need_check when we see block d (as it is shared)
we never add block b as needing to be checked. And because block c is in our
path already we bail out before we walk up to block b and add it to the backref
check list.
To fix this we need to reset need_check if we trip over a block that doesn't
need to be checked. This will make sure that any subsequent blocks in the path
as we're walking up afterwards are added to the list to be processed. With this
patch I can now mount Marc's fs image and it'll complete the balance without
panicing. Thanks,
Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When balance panics it tends to panic in the
BUG_ON(!upper->checked);
test, because it means it couldn't build the backref tree properly. This is
annoying to users and frankly a recoverable error, nothing in this function is
actually fatal since it is just an in-memory building of the backrefs for a
given bytenr. So go through and change all the BUG_ON()'s to ASSERT()'s, and
fix the BUG_ON(!upper->checked) thing to just return an error.
This patch also fixes the error handling so it tears down the work we've done
properly. This code was horribly broken since we always just panic'ed instead
of actually erroring out, so it needed to be completely re-worked. With this
patch my broken image no longer panics when I mount it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use a common definition for the inline data start so we don't have to
open-code it and introduce bugs like "Btrfs: fix wrong max inline data
size limit" fixed.
Signed-off-by: David Sterba <dsterba@suse.cz>
8MiB is way too large and likely set by mistake. This is not
a significant issue as in practice the max amount of data
added to an inline extent is also limited by the page cache
and btree leaf sizes.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Rename to btrfs_alloc_tree_block as it fits to the alloc/find/free +
_tree_block family. The parameter blocksize was set to the metadata
block size, directly or indirectly.
Signed-off-by: David Sterba <dsterba@suse.cz>
The parent_transid parameter has been unused since its introduction in
ca7a79ad8d ("Pass down the expected generation number when reading
tree blocks"). In reada_tree_block, it was even wrongly set to leafsize.
Transid check is done in the proper read and readahead ignores errors.
Signed-off-by: David Sterba <dsterba@suse.cz>
There are the branch hints that obviously depend on the data being
processed, the CPU predictor will do better job according to the actual
load. It also does not make sense to use the hints in slow paths that do
a lot of other operations like locking, waiting or IO.
Signed-off-by: David Sterba <dsterba@suse.cz>
This is to receive 0a30288da1 ("blk-mq, percpu_ref: implement a
kludge for SCSI blk-mq stall during probe") which implements
__percpu_ref_kill_expedited() to work around SCSI blk-mq stall. The
commit reverted and patches to implement proper fix will be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
When doing log replay we may have to update inodes, which traditionally goes
through our delayed inode stuff. This will try to move space over from the
trans handle, but we don't reserve space in our trans handle on replay since we
don't know how much we will need, so instead we try to flush. But because we
have a trans handle open we won't flush anything, so if we are out of reserve
space we will simply return ENOSPC. Since we know that if an operation made it
into the log then we definitely had space before the box bought the farm then we
don't need to worry about doing this space reservation. Use the
fs_info->log_root_recovering flag to skip the delayed inode stuff and update the
item directly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Trying to reproduce a log enospc bug I hit a panic in the async reclaim code
during log replay. This is because we use fs_info->fs_root as our root for
shrinking and such. Technically we can use whatever root we want, but let's
just not allow async reclaim while we're doing log replay. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
One problem that has plagued us is that a user will use up all of his space with
data, remove a bunch of that data, and then try to create a bunch of small files
and run out of space. This happens because all the chunks were allocated for
data since the metadata requirements were so low. But now there's a bunch of
empty data block groups and not enough metadata space to do anything. This
patch solves this problem by automatically deleting empty block groups. If we
notice the used count go down to 0 when deleting or on mount notice that a block
group has a used count of 0 then we will queue it to be deleted.
When the cleaner thread runs we will double check to make sure the block group
is still empty and then we will delete it. This patch has the side effect of no
longer having a bunch of BUG_ON()'s in the chunk delete code, which will be
helpful for both this and relocate. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"I've got a revert to fix a regression with btrfs device registration,
and Filipe has part two of his fsync fix from last week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "Btrfs: device_list_add() should not update list when mounted"
Btrfs: set inode's logged_trans/last_log_commit after ranged fsync
When we do a fast fsync, we start all ordered operations and then while
they're running in parallel we visit the list of modified extent maps
and construct their matching file extent items and write them to the
log btree. After that, in btrfs_sync_log() we wait for all the ordered
operations to finish (via btrfs_wait_logged_extents).
The problem with this is that we were completely ignoring errors that
can happen in the extent write path, such as -ENOSPC, a temporary -ENOMEM
or -EIO errors for example. When such error happens, it means we have parts
of the on disk extent that weren't written to, and so we end up logging
file extent items that point to these extents that contain garbage/random
data - so after a crash/reboot plus log replay, we get our inode's metadata
pointing to those extents.
This worked in contrast with the full (non-fast) fsync path, where we
start all ordered operations, wait for them to finish and then write
to the log btree. In this path, after each ordered operation completes
we check if it's flagged with an error (BTRFS_ORDERED_IOERR) and return
-EIO if so (via btrfs_wait_ordered_range).
So if an error happens with any ordered operation, just return a -EIO
error to userspace, so that it knows that not all of its previous writes
were durably persisted and the application can take proper action (like
redo the writes for e.g.) - and definitely not leave any file extent items
in the log refer to non fully written extents.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When the fsync callback (btrfs_sync_file) starts, it first waits for
the writeback of any dirty pages to start and finish without holding
the inode's mutex (to reduce contention). After this it acquires the
inode's mutex and repeats that process via btrfs_wait_ordered_range
only if we're doing a full sync (BTRFS_INODE_NEEDS_FULL_SYNC flag
is set on the inode).
This is not safe for a non full sync - we need to start and wait for
writeback to finish for any pages that might have been made dirty
before acquiring the inode's mutex and after that first step mentioned
before. Why this is needed is explained by the following comment added
to btrfs_sync_file:
"Right before acquiring the inode's mutex, we might have new
writes dirtying pages, which won't immediately start the
respective ordered operations - that is done through the
fill_delalloc callbacks invoked from the writepage and
writepages address space operations. So make sure we start
all ordered operations before starting to log our inode. Not
doing this means that while logging the inode, writeback
could start and invoke writepage/writepages, which would call
the fill_delalloc callbacks (cow_file_range,
submit_compressed_extents). These callbacks add first an
extent map to the modified list of extents and then create
the respective ordered operation, which means in
tree-log.c:btrfs_log_inode() we might capture all existing
ordered operations (with btrfs_get_logged_extents()) before
the fill_delalloc callback adds its ordered operation, and by
the time we visit the modified list of extent maps (with
btrfs_log_changed_extents()), we see and process the extent
map they created. We then use the extent map to construct a
file extent item for logging without waiting for the
respective ordered operation to finish - this file extent
item points to a disk location that might not have yet been
written to, containing random data - so after a crash a log
replay will make our inode have file extent items that point
to disk locations containing invalid data, as we returned
success to userspace without waiting for the respective
ordered operation to finish, because it wasn't captured by
btrfs_get_logged_extents()."
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This reverts commit b96de000bc.
This commit is triggering failures to mount by subvolume id in some
configurations. The main problem is how many different ways this
scanning function is used, both for scanning while mounted and
unmounted. A proper cleanup is too big for late rcs.
For now, just revert the commit and we'll put a better fix into a later
merge window.
Signed-off-by: Chris Mason <clm@fb.com>
The following commit enhanced the merge_extent_mapping() to reduce
fragment in extent map tree, but it can't handle case which existing
lies before map_start:
51f39 btrfs: Use right extent length when inserting overlap extent map.
[BUG]
When existing extent map's start is before map_start,
the em->len will be minus, which will corrupt the extent map and fail to
insert the new extent map.
This will happen when someone get a large extent map, but when it is
going to insert it into extent map tree, some one has already commit
some write and split the huge extent into small parts.
[REPRODUCER]
It is very easy to tiger using filebench with randomrw personality.
It is about 100% to reproduce when using 8G preallocated file in 60s
randonrw test.
[FIX]
This patch can now handle any existing extent position.
Since it does not directly use existing->start, now it will find the
previous and next extent around map_start.
So the old existing->start < map_start bug will never happen again.
[ENHANCE]
This patch will insert the best fitted extent map into extent map tree,
other than the oldest [map_start, map_start + sectorsize) or the
relatively newer but not perfect [map_start, existing->start).
The patch will first search existing extent that does not intersects with
the desired map range [map_start, map_start + len).
The existing extent will be either before or behind map_start, and based
on the existing extent, we can find out the previous and next extent
around map_start.
So the best fitted extent would be [prev->end, next->start).
For prev or next is not found, em->start would be prev->end and em->end
wold be next->start.
With this patch, the fragment in extent map tree should be reduced much
more than the 51f39 commit and reduce an unneeded extent map tree search.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
An user reported this, it is because that lseek's SEEK_SET/SEEK_CUR/SEEK_END
allow a negative value for @offset, but btrfs's SEEK_DATA/SEEK_HOLE don't
prepare for that and convert the negative @offset into unsigned type,
so we get (end < start) warning.
[ 1269.835374] ------------[ cut here ]------------
[ 1269.836809] WARNING: CPU: 0 PID: 1241 at fs/btrfs/extent_io.c:430 insert_state+0x11d/0x140()
[ 1269.838816] BTRFS: end < start 4094 18446744073709551615
[ 1269.840334] CPU: 0 PID: 1241 Comm: a.out Tainted: G W 3.16.0+ #306
[ 1269.858229] Call Trace:
[ 1269.858612] [<ffffffff81801a69>] dump_stack+0x4e/0x68
[ 1269.858952] [<ffffffff8107894c>] warn_slowpath_common+0x8c/0xc0
[ 1269.859416] [<ffffffff81078a36>] warn_slowpath_fmt+0x46/0x50
[ 1269.859929] [<ffffffff813b0fbd>] insert_state+0x11d/0x140
[ 1269.860409] [<ffffffff813b1396>] __set_extent_bit+0x3b6/0x4e0
[ 1269.860805] [<ffffffff813b21c7>] lock_extent_bits+0x87/0x200
[ 1269.861697] [<ffffffff813a5b28>] btrfs_file_llseek+0x148/0x2a0
[ 1269.862168] [<ffffffff811f201e>] SyS_lseek+0xae/0xc0
[ 1269.862620] [<ffffffff8180b212>] system_call_fastpath+0x16/0x1b
[ 1269.862970] ---[ end trace 4d33ea885832054b ]---
This assumes that btrfs starts finding DATA/HOLE from the beginning of file
if the assigned @offset is negative.
Also we add alignment for lock_extent_bits 's range.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
After the data is written successfully, we should cleanup the read failure record
in that range because
- If we set data COW for the file, the range that the failure record pointed to is
mapped to a new place, so it is invalid.
- If we set no data COW for the file, and if there is no error during writting,
the corrupted data is corrected, so the failure record can be removed. And if
some errors happen on the mirrors, we also needn't worry about it because the
failure record will be recreated if we read the same place again.
Sometimes, we may fail to correct the data, so the failure records will be left
in the tree, we need free them when we free the inode or the memory leak happens.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch implement data repair function when direct read fails.
The detail of the implementation is:
- When we find the data is not right, we try to read the data from the other
mirror.
- When the io on the mirror ends, we will insert the endio work into the
dedicated btrfs workqueue, not common read endio workqueue, because the
original endio work is still blocked in the btrfs endio workqueue, if we
insert the endio work of the io on the mirror into that workqueue, deadlock
would happen.
- After we get right data, we write it back to the corrupted mirror.
- And if the data on the new mirror is still corrupted, we will try next
mirror until we read right data or all the mirrors are traversed.
- After the above work, we set the uptodate flag according to the result.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need real mirror number for RAID0/5/6 when reading data, or if read error
happens, we would pass 0 as the number of the mirror on which the io error
happens. It is wrong and would cause the filesystem read the data from the
corrupted mirror again.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We could not use clean_io_failure in the direct IO path because it got the
filesystem information from the page structure, but the page in the direct
IO bio didn't have the filesystem information in its structure. So we need
modify it and pass all the information it need by parameters.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The original code of repair_io_failure was just used for buffered read,
because it got some filesystem data from page structure, it is safe for
the page in the page cache. But when we do a direct read, the pages in bio
are not in the page cache, that is there is no filesystem data in the page
structure. In order to implement direct read data repair, we need modify
repair_io_failure and pass all filesystem data it need by function
parameters.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The data repair function of direct read will be implemented later, and some code
in bio_readpage_error will be reused, so split bio_readpage_error into
several functions which will be used in direct read repair later.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We forgot to free failure record and bio after submitting re-read bio failed,
fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Direct IO splits the original bio to several sub-bios because of the limit of
raid stripe, and the filesystem will wait for all sub-bios and then run final
end io process.
But it was very hard to implement the data repair when dio read failure happens,
because at the final end io function, we didn't know which mirror the data was
read from. So in order to implement the data repair, we have to move the file data
check in the final end io function to the sub-bio end io function, in which we can
get the mirror number of the device we access. This patch did this work as the
first step of the direct io data repair implementation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The current code would load checksum data for several times when we split
a whole direct read io because of the limit of the raid stripe, it would
make us search the csum tree for several times. In fact, it just wasted time,
and made the contention of the csum tree root be more serious. This patch
improves this problem by loading the data at once.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
rw_devices counter is often used to tune the profile when doing chunk allocation,
so we should modify it under the chunk_mutex context to avoid getting wrong
chunk profile.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
For a missing device, we don't know it belong to which fs before we read its
fsid from the chunk tree. So we add them into the current fs device list at first.
When we get its fsid, we should move them to their own fs device list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we open a seed filesystem, if the degraded mount option is set, we continue to
mount the fs if we don't find some devices in the seed filesystem. But we should stop
mounting if other errors happen. Fix it
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The problem is:
Task0(device scan task) Task1(device replace task)
scan_one_device()
mutex_lock(&uuid_mutex)
device = find_device()
mutex_lock(&device_list_mutex)
lock_chunk()
rm_and_free_source_device
unlock_chunk()
mutex_unlock(&device_list_mutex)
check device
Destroying the target device if device replace fails also has the same problem.
We fix this problem by locking uuid_mutex during destroying source device or
target device, just like the device remove operation.
It is a temporary solution, we can fix this problem and make the code more
clear by atomic counter in the future.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can build a new filesystem based a seed filesystem, and we need clone
the fs devices when we open the new filesystem. But someone might clear
the seed flag of the seed filesystem, then mount that filesystem and
remove some device. If we mount the new filesystem, we might access
a device list which was being changed when we clone the fs devices.
Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
There were several problems about chunk mutex usage:
- Lock chunk mutex when updating metadata. It would cause the nested
deadlock because updating metadata might need allocate new chunks
that need acquire chunk mutex. We remove chunk mutex at this case,
because b-tree lock and other lock mechanism can help us.
- ABBA deadlock occured between device_list_mutex and chunk_mutex.
When we update device status, we must acquire device_list_mutex at the
beginning, and then we might get chunk_mutex during the device status
update because we need allocate new chunks for metadata COW. But at
most place, we acquire chunk_mutex at first and then acquire device list
mutex. We need change the lock order.
- Some place we needn't acquire chunk_mutex. For example we needn't get
chunk_mutex when we free a empty seed fs_devices structure.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we get the fs information, we forgot to acquire the mutex of device list,
it might cause the problem we might access a device that was removed. Fix
it by acquiring the device list mutex.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We didn't protect the system chunk array when we added a new
system chunk into it, it would cause the array be corrupted
if someone remove/add some system chunk into array at the same
time. Fix it by chunk lock.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
->total_bytes,->disk_total_bytes,->bytes_used is protected by chunk
lock when we change them, but sometimes we read them without any lock,
and we might get unexpected value. We fix this problem like inode's
i_size.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should update free_chunk_space in time when we allocate a new chunk,
not when we deal with the pending device update and block group insertion,
because we need the real free_chunk_space data to calculate the reserved
space, if we don't update it in time, we would consider the disk space which
has be allocated as free space, and would use it to do overcommit reservation.
Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should update device->bytes_used in the lock context of
chunk_mutex, or we would get wrong data.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
During removing a device, we have modified free_chunk_space when we
shrink the device, so we needn't assign a new value to it after
the device shrink. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
device->bytes_used will be changed when allocating a new chunk, and
disk_total_size will be changed if resizing is successful.
Meanwhile, the on-disk super blocks of the previous transaction
might not be updated. Considering the consistency of the metadata
in the previous transaction, We should use the size in the previous
transaction to check if the super block is beyond the boundary
of the device.
Though it is not big problem because we don't use it now, but anyway
it is better that we make it be consistent with the common metadata,
maybe we will use it in the future.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
total_size will be changed when resizing a device, and disk_total_size
will be changed if resizing is successful. Meanwhile, the on-disk super
blocks of the previous transaction might not be updated. Considering
the consistency of the metadata in the previous transaction, We should
use the size in the previous transaction to check if the super block is
beyond the boundary of the device. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We didn't protect the assignment of the target device, it might cause the
problem that the super block update was skipped because we might find wrong
size of the target device during the assignment. Fix it by moving the
assignment sentences into the initialization function of the target device.
And there is another merit that we can check if the target device is suitable
more early.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The member variants - num_can_discard - of fs_devices structure
are set, but no one use them to do anything. so remove them.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This comments became wrong after c3c532[bdi: add helper function for
doing init and register of a bdi for a file system], so remove them.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
When replaying a directory from the fsync log, if a directory entry
exists both in the fs/subvol tree and in the log, the directory's inode
got its i_size updated incorrectly, accounting for the dentry's name
twice.
Reproducer, from a test for xfstests:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
touch $SCRATCH_MNT/foo
sync
touch $SCRATCH_MNT/bar
xfs_io -c "fsync" $SCRATCH_MNT
xfs_io -c "fsync" $SCRATCH_MNT/bar
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
[ -f $SCRATCH_MNT/foo ] || echo "file foo is missing"
[ -f $SCRATCH_MNT/bar ] || echo "file bar is missing"
_unmount_flakey
_check_scratch_fs $FLAKEY_DEV
The filesystem check at the end failed with the message:
"root 5 root dir 256 error".
A test case for xfstests follows.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
One of my tests shows that when we really don't have space to reclaim via
flush_space and also run out of space, this async reclaim work loops on adding
itself into the workqueue and keeps writing something to disk according to
iostat's results, and these writes mainly comes from commit_transaction which
writes super_block. This's unacceptable as it can be bad to disks, especially
memeory storages.
This adds a check to avoid the above situation.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have been iterating all references for each extent we have in a file when we
do fiemap to see if it is shared. This is fine when you have a few clones or a
few snapshots, but when you have 5k snapshots suddenly fiemap just sits there
and stares at you. So add btrfs_check_shared which will use the backref walking
code but will short circuit as soon as it finds a root or inode that doesn't
match the one we currently have. This makes fiemap on my testbox go from
looking at me blankly for a day to spitting out actual output in a reasonable
amount of time. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The behaviour of a 'chattr -c' consists of getting the current flags,
clearing the FS_COMPR_FL bit and then sending the result to the set
flags ioctl - this means the bit FS_NOCOMP_FL isn't set in the flags
passed to the ioctl. This results in the compression property not being
cleared from the inode - it was cleared only if the bit FS_NOCOMP_FL
was set in the received flags.
Reproducer:
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt && cd /mnt
$ mkdir a
$ chattr +c a
$ touch a/file
$ lsattr a/file
--------c------- a/file
$ chattr -c a
$ touch a/file2
$ lsattr a/file2
--------c------- a/file2
$ lsattr -d a
---------------- a
Reported-by: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs-transacion:5657
[stack snip]
btrfs_bio_map()
btrfs_bio_counter_inc_blocked()
percpu_counter_inc(&fs_info->bio_counter) ###bio_counter > 0(A)
__btrfs_bio_map()
btrfs_dev_replace_lock()
mutex_lock(dev_replace->lock) ###wait mutex(B)
btrfs:32612
[stack snip]
btrfs_dev_replace_start()
btrfs_dev_replace_lock()
mutex_lock(dev_replace->lock) ###hold mutex(B)
btrfs_dev_replace_finishing()
btrfs_rm_dev_replace_blocked()
wait until percpu_counter_sum == 0 ###wait on bio_counter(A)
This bug can be triggered quite easily by the following test script:
http://pastebin.com/MQmb37Cy
This patch will fix the ABBA problem by calling
btrfs_dev_replace_unlock() before btrfs_rm_dev_replace_blocked().
The consistency of btrfs devices list and their superblocks is protected
by device_list_mutex, not btrfs_dev_replace_lock/unlock().
So it is safe the move btrfs_dev_replace_unlock() before
btrfs_rm_dev_replace_blocked().
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <clm@fb.com>
We've defined a 'offset' out of bio_for_each_segment_all.
This is just a clean rename, no function changes.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_drop_snapshot() leaves subvolume qgroup items on disk after
completion. This can cause problems with snapshot creation. If a new
snapshot tries to claim the deleted subvolumes id, btrfs will get -EEXIST
from add_qgroup_item() and go read-only. The following commands will
reproduce this problem (assume btrfs is on /dev/sda and is mounted at
/btrfs)
mkfs.btrfs -f /dev/sda
mount -t btrfs /dev/sda /btrfs/
btrfs quota enable /btrfs/
btrfs su sna /btrfs/ /btrfs/snap
btrfs su de /btrfs/snap
sleep 45
umount /btrfs/
mount -t btrfs /dev/sda /btrfs/
We can fix this by catching -EEXIST in add_qgroup_item() and
initializing the existing items. We have the problem of orphaned
relation items being on disk from an old snapshot but that is outside
the scope of this patch.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
The map_start and map_len fields aren't used anywhere, so just remove
them. On a x86_64 system, this reduced sizeof(struct extent_buffer)
from 296 bytes to 280 bytes, and therefore 14 extent_buffer structs can
now fit into a page instead of 13.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Maximum xattr size can be up to nearly the leaf size. For an fs with a
leaf size larger than the page size, using kmalloc requires allocating
multiple pages that are contiguous, which might not be possible if
there's heavy memory fragmentation. Therefore fallback to vmalloc if
we fail to allocate with kmalloc. Also start with a smaller buffer size,
since xattr values typically are smaller than a page.
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Last user removed in commit "btrfs: disable strict file flushes for
renames and truncates" (8d875f95da).
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
While under random IO, a block group's free space cache eventually reaches
a state where it has a mix of extent entries and bitmap entries representing
free space regions.
As later free space regions are returned to the cache, some of them are merged
with existing extent entries if they are contiguous with them. But others are
not merged, because despite the existence of adjacent free space regions in
the cache, the merging doesn't happen because the existing free space regions
are represented in bitmap extents. Even when new free space regions are merged
with existing extent entries (enlarging the free space range they represent),
we create chances of having after an enlarged region that is contiguous with
some other region represented in a bitmap entry.
Both clustered and non-clustered space allocation work by iterating over our
extent and bitmap entries and skipping any that represents a region smaller
then the allocation request (and giving preference to extent entries before
bitmap entries). By having a contiguous free space region that is represented
by 2 (or more) entries (mix of extent and bitmap entries), we end up not
satisfying an allocation request with a size larger than the size of any of
the entries but no larger than the sum of their sizes. Making the caller assume
we're under a ENOSPC condition or force it to allocate multiple smaller space
regions (as we do for file data writes), which adds extra overhead and more
chances of causing fragmentation due to the smaller regions being all spread
apart from each other (more likely when under concurrency).
For example, if we have the following in the cache:
* extent entry representing free space range: [128Mb - 256Kb, 128Mb[
* bitmap entry covering the range [128Mb, 256Mb[, but only with the bits
representing the range [128Mb, 128Mb + 768Kb[ set - that is, only that
space in this 128Mb area is marked as free
An allocation request for 1Mb, starting at offset not greater than 128Mb - 256Kb,
would fail before, despite the existence of such contiguous free space area in the
cache. The caller could only allocate up to 768Kb of space at once and later another
256Kb (or vice-versa). In between each smaller allocation request, another task
working on a different file/inode might come in and take that space, preventing the
former task of getting a contiguous 1Mb region of free space.
Therefore this change implements the ability to move free space from bitmap
entries into existing and new free space regions represented with extent
entries. This is done when a space region is added to the cache.
A test was added to the sanity tests that explains in detail the issue too.
Some performance test results with compilebench on a 4 cores machine, with
32Gb of ram and using an HDD follow.
Test: compilebench -D /mnt -i 30 -r 1000 --makej
Before this change:
intial create total runs 30 avg 69.02 MB/s (user 0.28s sys 0.57s)
compile total runs 30 avg 314.96 MB/s (user 0.12s sys 0.25s)
read compiled tree total runs 3 avg 27.14 MB/s (user 1.52s sys 0.90s)
delete compiled tree total runs 30 avg 3.14 seconds (user 0.15s sys 0.66s)
After this change:
intial create total runs 30 avg 68.37 MB/s (user 0.29s sys 0.55s)
compile total runs 30 avg 382.83 MB/s (user 0.12s sys 0.24s)
read compiled tree total runs 3 avg 27.82 MB/s (user 1.45s sys 0.97s)
delete compiled tree total runs 30 avg 3.18 seconds (user 0.17s sys 0.65s)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
we are assigning number_devices to the total_bytes,
that's very confusing for a moment
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
there is no matching open parenthesis for the closing parenthesis
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
seed fs devices don't participate as rw_device, so don't increment
rw_devices when the device being handled belongs to a seed fs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we replace all the seed device in the system there is
no point in just keeping the btrfs_fs_devices with out
any device
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
We are not updating sprout fs seed pointer when all seed device
is replaced. This patch will check if all seed device has been
replaced and then update the sprout pointer accordingly.
Same reproducer as in the previous patch would apply here.
And notice that btrfs_close_device will check if seed fs is
present and spits out the error with out this patch.
int btrfs_close_devices(struct btrfs_fs_devices *fs_devices)
{
::
seed_devices = fs_devices->seed;
::
while (seed_devices) {
fs_devices = seed_devices;
seed_devices = fs_devices->seed;
__btrfs_close_devices(fs_devices);
free_fs_devices(fs_devices);
}
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
reproducer:
reproducer:
mount /dev/sdb /btrfs
btrfs dev add /dev/sdc /btrfs
btrfs rep start -B /dev/sdb /dev/sdd /btrfs
umount /btrfs
WARNING: CPU: 0 PID: 3882 at fs/btrfs/volumes.c:892 __btrfs_close_devices+0x1c8/0x200 [btrfs]()
which is
WARN_ON(fs_devices->rw_devices);
The problem here is that we did not add one to the rw_devices when
we replace the seed device with a writable device.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
reproducer:
mount /dev/sdb /btrfs
btrfs dev add /dev/sdc /btrfs
btrfs rep start -B /dev/sdb /dev/sdd /btrfs
umount /btrfs
WARNING: CPU: 0 PID: 12661 at fs/btrfs/volumes.c:891 __btrfs_close_devices+0x1b0/0x200 [btrfs]()
::
__btrfs_close_devices()
::
WARN_ON(fs_devices->open_devices);
After the seed device has been replaced the new target device
is no more a seed device. So we need to update the device
numbers in the fs_devices as pointed by the fs_info.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
There is no logical change in this patch, just a preparatory patch,
so that changes can be easily reasoned.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
The issue was introduced in a79b7d4b3e,
adding allocation of extent_workers, so this stray check is surely not
meant to be a check of something else.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=82021
Reported-by: Maks Naumov <maksqwe1@ukr.net>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
None of the uses of btrfs_search_forward() need to have the path
nodes (level >= 1) read locked, only the leaf needs to be locked
while the caller processes it. Therefore make it return a path
with all nodes unlocked, except for the leaf.
This change is motivated by the observation that during a file
fsync we repeatdly call btrfs_search_forward() and process the
returned leaf while upper nodes of the returned path (level >= 1)
are read locked, which unnecessarily blocks other tasks that want
to write to the same fs/subvol btree.
Therefore instead of modifying the fsync code to unlock all nodes
with level >= 1 immediately after calling btrfs_search_forward(),
change btrfs_search_forward() to do it, so that it benefits all
callers.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
BTRFS_ATTR_RW could set the mode and be inline with BTRFS_ATTR
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
All that uses BTRFS_ATTR want mode to be set at 0444 so just do
it at the define. And few spacing alignments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we need to cow a node, increase the write lock level and retry the
tree search, there's no point of changing the node locks in our path
to blocking mode, as we only waste time and unnecessarily wake up other
tasks waiting on the spinning locks (just to block them again shortly
after) because we release our path before repeating the tree search.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In ctree.c:setup_items_for_insert(), we can unlock all nodes in our
path before we process the leaf (shift items and data, adjust data
offsets, etc). This allows for better btree concurrency, as we're
often holding a write lock on at least the node at level 1.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_lookup_csums_range() uses ALIGN() to check if "start"
and "end + 1" are aligned to "root->sectorsize". It's better to
replace these with IS_ALIGNED() for simplicity.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We want this to debug qgroup changes on live systems.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The member variants - latest_devid and latest_trans - of fs_devices structure
are set, but no one use them to do anything. so remove them.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The io error might happen during writing out the device stats, and the
device stats information and dirty flag would be update at that time,
but the current code didn't consider this case, just clear the dirty
flag, it would cause that we forgot to write out the new device stats
information. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The lock in btrfs_device structure was far away from its protected data, it would
make CPU load the cache line twice when we accessed them, move them together.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The super block generation of the seed devices is not the same as the
filesystem which sprouted from them because we don't update the super
block on the seed devices when we change that new filesystem. So we
should not use the generation of that new filesystem to check the super
block generation on the seed devices, Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
All the metadata in the seed devices has the same fsid as the fsid
of the seed filesystem which is on the seed device, so we should check
them by the current filesystem. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The transaction thread may want to do more work, namely it pokes the
cleaner ktread that will start processing uncleaned subvols.
This can be triggered by user via the 'btrfs fi sync' command, otherwise
there was a delay up to 30 seconds before the cleaner started to clean
old snapshots.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
inline data is stored from offset of @disk_bytenr in
struct btrfs_file_extent_item. So substracting total
size of struct btrfs_file_extent_item is wrong, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs could still inline file data if its size is same as
page size, so don't skip max value here.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If flag NOCOMPRESS is set which means bad compression ratio,
we could avoid call cow_file_range_async() for this case earlier.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If a file's compression ratios is bad, we will set NOCOMPRESS
flag for it, and it will skip compression for that inode next time.
However, if we remount fs to COMPRESS_FORCE, it still should try
if we could compress pages for that inode, this patch fix wrong
check for this problem.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Fix the following sparse warning:
fs/btrfs/send.c:518:51: warning: incorrect type in argument 2 (different address spaces)
fs/btrfs/send.c:518:51: expected char const [noderef] <asn:1>*<noident>
fs/btrfs/send.c:518:51: got char *
We can safely use (const char __user *) with set_fs(KERNEL_DS)
__force added to avoid sparse-all warning:
fs/btrfs/send.c:518:40: warning: cast adds address space to expression (<asn:1>)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: Zach Brown <zab@zabbo.net>
Signed-off-by: Chris Mason <clm@fb.com>
Use BUG_ON(x) rather than if(x) BUG();
The semantic patch that fixes this problem is as follows:
// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Chris Mason <clm@fb.com>
`struct workspace' used for zlib compression contains two zlib
z_stream-s: `def_strm' used in zlib_compress_pages(), and `inf_strm'
used in zlib_decompress/zlib_decompress_biovec(). None of these
functions use `inf_strm' and `def_strm' simultaniously, meaning that
for every compress/decompress operation we need only one z_stream
(out of two available).
`inf_strm' and `def_strm' are different in size of ->workspace. For
inflate stream we vmalloc() zlib_inflate_workspacesize() bytes, for
deflate stream - zlib_deflate_workspacesize() bytes. On my system zlib
returns the following workspace sizes, correspondingly: 42312 and 268104
(+ guard pages).
Keep only one `z_stream' in `struct workspace' and use it for both
compression and decompression. Hence, instead of vmalloc() of two
z_stream->worskpace-s, allocate only one of size:
max(zlib_deflate_workspacesize(), zlib_inflate_workspacesize())
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
We were returning with 0 (success) because we weren't extracting the
error code from em (PTR_ERR(em)). Fix it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The tree field of struct extent_state was only used to figure out if
an extent state was connected to an inode's io tree or not. For this
we can just use the rb_node field itself.
On a x86_64 system with this change the sizeof(struct extent_state) is
reduced from 96 bytes down to 88 bytes, meaning that with a page size
of 4096 bytes we can now store 46 extent states per page instead of 42.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
replace IS_ERR/PTR_ERR
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Chris Mason <clm@fb.com>
Marc argued that if there are several btrfs filesystems mounted,
while users even don't know which filesystem hit the corrupted
errors something like generation verification failure.
Since @extent_buffer structure has a member @fs_info, let's output
btrfs device info.
Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we mounted a seed filesystem with degraded option, and then added a new
device into the seed filesystem, then we found adding device failed because
of the IO failure.
Steps to reproduce:
# mkfs.btrfs -d raid1 -m raid1 <dev0> <dev1>
# btrfstune -S 1 <dev0>
# mount <dev0> -o degraded <mnt>
# btrfs device add -f <dev2> <mnt>
It is because the original didn't set the chunk on the seed device to be
read-only if the degraded flag was set. It was introduced by patch f48b90756,
which fixed the problem the raid1 filesystem became read-only after one device
of it was missing. But this fix method was not right, we should set the read-only
flag according to the number of the missing devices, not the degraded mount
option, if the number of the missing devices is less than the max error number
that the profile of the chunk tolerates, we don't set it to be read-only.
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs defragment will utilize COW feature, which means this
did not work for nodatacow option, this problem was detected
by xfstests generic/018 with nodatacow mount option.
Fix this problem by forcing cow for a extent with state
@EXTETN_DEFRAG setting.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
as in the disk add patch, disk detached from the volume must be
recorded in the syslog as well for the same reason.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
when we add a new disk to the mounted btrfs we don't record it
as of now, disk add is a critical change of btrfs configuration,
it must be recorded in the syslog to help offline investigations
of customer problems when reported.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
# mkfs.btrfs -f /dev/sdb
# mount /dev/sdb /mnt -o compress-force=lzo
# mount /dev/sdb /mnt -o remount,compress=zlib
# cat /proc/mounts
Remounting from compress-force to compress could not clear compress-force
option. The problem is there is no way for users to clear compress-force
option separately.
Fix this problem by clearing @FORCE_COMPRESS flag when remounting to
compress=xxx.
Suggested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The form
(value + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT
is equivalent to
(value + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE
The rest is a simple subsitution, no difference in the generated
assembly code.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The nodesize and leafsize were never of different values. Unify the
usage and make nodesize the one. Cleanup the redundant checks and
helpers.
Shaves a few bytes from .text:
text data bss dec hex filename
852418 24560 23112 900090 dbbfa btrfs.ko.before
851074 24584 23112 898770 db6d2 btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
There's no user of the return value and we can get rid of the comment in
put_super.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The naming is confusing, generic yet used for a specific cache. Add a
prefix 'ino_' or rename appropriately.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When a ranged fsync finishes if there are still extent maps in the modified
list, still set the inode's logged_trans and last_log_commit. This is important
in case an inode is fsync'ed and unlinked in the same transaction, to ensure its
inode ref gets deleted from the log and the respective dentries in its parent
are deleted too from the log (if the parent directory was fsync'ed in the same
transaction).
Instead make btrfs_inode_in_log() return false if the list of modified extent
maps isn't empty.
This is an incremental on top of the v4 version of the patch:
"Btrfs: fix fsync data loss after a ranged fsync"
which was added to its v5, but didn't make it on time.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"Filipe is doing a careful pass through fsync problems, and these are
the fixes so far. I'll have one more for rc6 that we're still
testing.
My big commit is fixing up some inode hash races that Al Viro found
(thanks Al)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: use insert_inode_locked4 for inode creation
Btrfs: fix fsync data loss after a ranged fsync
Btrfs: kfree()ing ERR_PTRs
Btrfs: fix crash while doing a ranged fsync
Btrfs: fix corruption after write/fsync failure + fsync + log recovery
Btrfs: fix autodefrag with compression
A bit of churn on the for-linus side that would be nice to have
in the core bits for 3.18, so pull it in to catch us up and make
forward progress easier.
Signed-off-by: Jens Axboe <axboe@fb.com>
Conflicts:
block/scsi_ioctl.c
Btrfs was inserting inodes into the hash table before we had fully
set the inode up on disk. This leaves us open to rare races that allow
two different inodes in memory for the same [root, inode] pair.
This patch fixes things by using insert_inode_locked4 to insert an I_NEW
inode and unlock_new_inode when we're ready for the rest of the kernel
to use the inode.
It also makes sure to init the operations pointers on the inode before
going into the error handling paths.
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
While we're doing a full fsync (when the inode has the flag
BTRFS_INODE_NEEDS_FULL_SYNC set) that is ranged too (covers only a
portion of the file), we might have ordered operations that are started
before or while we're logging the inode and that fall outside the fsync
range.
Therefore when a full ranged fsync finishes don't remove every extent
map from the list of modified extent maps - as for some of them, that
fall outside our fsync range, their respective ordered operation hasn't
finished yet, meaning the corresponding file extent item wasn't inserted
into the fs/subvol tree yet and therefore we didn't log it, and we must
let the next fast fsync (one that checks only the modified list) see this
extent map and log a matching file extent item to the log btree and wait
for its ordered operation to finish (if it's still ongoing).
A test case for xfstests follows.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The "inherit" in btrfs_ioctl_snap_create_v2() and "vol_args" in
btrfs_ioctl_rm_dev() are ERR_PTRs so we can't call kfree() on them.
These kind of bugs are "One Err Bugs" where there is just one error
label that does everything. I could set the "inherit = NULL" and keep
the single out label but it ends up being more complicated that way. It
makes the code simpler to re-order the unwind so it's in the mirror
order of the allocation and introduce some new error labels.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
bdev_get_queue() returns the request_queue associated with the
specified block_device. blk_get_backing_dev_info() makes use of
bdev_get_queue() to determine the associated bdi given a block_device.
All the callers of bdev_get_queue() including
blk_get_backing_dev_info() assume that bdev_get_queue() may return
NULL and implement NULL handling; however, bdev_get_queue() requires
the passed in block_device is opened and attached to its gendisk.
Because an active gendisk always has a valid request_queue associated
with it, bdev_get_queue() can never return NULL and neither can
blk_get_backing_dev_info().
Make it clear that neither of the two functions can return NULL and
remove NULL handling from all the callers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Percpu allocator now supports allocation mask. Add @gfp to
percpu_counter_init() so that !GFP_KERNEL allocation masks can be used
with percpu_counters too.
We could have left percpu_counter_init() alone and added
percpu_counter_init_gfp(); however, the number of users isn't that
high and introducing _gfp variants to all percpu data structures would
be quite ugly, so let's just do the conversion. This is the one with
the most users. Other percpu data structures are a lot easier to
convert.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
While doing a ranged fsync, that is, one whose range doesn't cover the
whole possible file range (0 to LLONG_MAX), we can crash under certain
circumstances with a trace like the following:
[41074.641913] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
(...)
[41074.642692] CPU: 0 PID: 24580 Comm: fsx Not tainted 3.16.0-fdm-btrfs-next-45+ #1
(...)
[41074.643886] RIP: 0010:[<ffffffffa01ecc99>] [<ffffffffa01ecc99>] btrfs_ordered_update_i_size+0x279/0x2b0 [btrfs]
(...)
[41074.644919] Stack:
(...)
[41074.644919] Call Trace:
[41074.644919] [<ffffffffa01db531>] btrfs_truncate_inode_items+0x3f1/0xa10 [btrfs]
[41074.644919] [<ffffffffa01eb54f>] ? btrfs_get_logged_extents+0x4f/0x80 [btrfs]
[41074.644919] [<ffffffffa02137a9>] btrfs_log_inode+0x2f9/0x970 [btrfs]
[41074.644919] [<ffffffff81090875>] ? sched_clock_local+0x25/0xa0
[41074.644919] [<ffffffff8164a55e>] ? mutex_unlock+0xe/0x10
[41074.644919] [<ffffffff810af51d>] ? trace_hardirqs_on+0xd/0x10
[41074.644919] [<ffffffffa0214b4f>] btrfs_log_inode_parent+0x1ef/0x560 [btrfs]
[41074.644919] [<ffffffff811d0c55>] ? dget_parent+0x5/0x180
[41074.644919] [<ffffffffa0215d11>] btrfs_log_dentry_safe+0x51/0x80 [btrfs]
[41074.644919] [<ffffffffa01e2d1a>] btrfs_sync_file+0x1ba/0x3e0 [btrfs]
[41074.644919] [<ffffffff811eda6b>] vfs_fsync_range+0x1b/0x30
(...)
The necessary conditions that lead to such crash are:
* an incremental fsync (when the inode doesn't have the
BTRFS_INODE_NEEDS_FULL_SYNC flag set) happened for our file and it logged
a file extent item ending at offset X;
* the file got the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode, due
to a file truncate operation that reduces the file to a size smaller
than X;
* a ranged fsync call happens (via an msync for example), with a range that
doesn't cover the whole file and the end of this range, lets call it Y, is
smaller than X;
* btrfs_log_inode, sees the flag BTRFS_INODE_NEEDS_FULL_SYNC set and
calls btrfs_truncate_inode_items() to remove all items from the log
tree that are associated with our file;
* btrfs_truncate_inode_items() removes all of the inode's items, and the lowest
file extent item it removed is the one ending at offset X, where X > 0 and
X > Y - before returning, it calls btrfs_ordered_update_i_size() with an offset
parameter set to X;
* btrfs_ordered_update_i_size() sees that X is greater then the current ordered
size (btrfs_inode's disk_i_size) and then it assumes there can't be any ongoing
ordered operation with a range covering the offset X, calling a BUG_ON() if
such ordered operation exists. This assumption is made because the disk_i_size
is only increased after the corresponding file extent item is added to the
btree (btrfs_finish_ordered_io);
* But because our fsync covers only a limited range, such an ordered extent might
exist, and our fsync callback (btrfs_sync_file) doesn't wait for such ordered
extent to finish when calling btrfs_wait_ordered_range();
And then by the time btrfs_ordered_update_i_size() is called, via:
btrfs_sync_file() ->
btrfs_log_dentry_safe() ->
btrfs_log_inode_parent() ->
btrfs_log_inode() ->
btrfs_truncate_inode_items() ->
btrfs_ordered_update_i_size()
We hit the BUG_ON(), which could never happen if the fsync range covered the whole
possible file range (0 to LLONG_MAX), as we would wait for all ordered extents to
finish before calling btrfs_truncate_inode_items().
So just don't call btrfs_ordered_update_i_size() if we're removing the inode's items
from a log tree, which isn't supposed to change the in memory inode's disk_i_size.
Issue found while running xfstests/generic/127 (happens very rarely for me), more
specifically via the fsx calls that use memory mapped IO (and issue msync calls).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
While writing to a file, in inode.c:cow_file_range() (and same applies to
submit_compressed_extents()), after reserving an extent for the file data,
we create a new extent map for the written range and insert it into the
extent map cache. After that, we create an ordered operation, but if it
fails (due to a transient/temporary-ENOMEM), we return without dropping
that extent map, which points to a reserved extent that is freed when we
return. A subsequent incremental fsync (when the btrfs inode doesn't have
the flag BTRFS_INODE_NEEDS_FULL_SYNC) considers this extent map valid and
logs a file extent item based on that extent map, which points to a disk
extent that doesn't contain valid data - it was freed by us earlier, at this
point it might contain any random/garbage data.
Therefore, if we reach an error condition when cowing a file range after
we added the new extent map to the cache, drop it from the cache before
returning.
Some sequence of steps that lead to this:
$ mkfs.btrfs -f /dev/sdd
$ mount -o commit=9999 /dev/sdd /mnt
$ cd /mnt
$ xfs_io -f -c "pwrite -S 0x01 -b 4096 0 4096" -c "fsync" foo
$ xfs_io -c "pwrite -S 0x02 -b 4096 4096 4096"
$ sync
$ od -t x1 foo
0000000 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
*
0010000 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
*
0020000
$ xfs_io -c "pwrite -S 0xa1 -b 4096 0 4096" foo
# Now this write + fsync fail with -ENOMEM, which was returned by
# btrfs_add_ordered_extent() in inode.c:cow_file_range().
$ xfs_io -c "pwrite -S 0xff -b 4096 4096 4096" foo
$ xfs_io -c "fsync" foo
fsync: Cannot allocate memory
# Now do a new write + fsync, which will succeed. Our previous
# -ENOMEM was a transient/temporary error.
$ xfs_io -c "pwrite -S 0xee -b 4096 16384 4096" foo
$ xfs_io -c "fsync" foo
# Our file content (in page cache) is now:
$ od -t x1 foo
0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
*
0010000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0020000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0040000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0050000
# Now reboot the machine, and mount the fs, so that fsync log replay
# takes place.
# The file content is now weird, in particular the first 8Kb, which
# do not match our data before nor after the sync command above.
$ od -t x1 foo
0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0010000 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
*
0020000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0040000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0050000
# In fact these first 4Kb are a duplicate of the last 4kb block.
# The last write got an extent map/file extent item that points to
# the same disk extent that we got in the write+fsync that failed
# with the -ENOMEM error. btrfs-debug-tree and btrfsck allow us to
# verify that:
$ btrfs-debug-tree /dev/sdd
(...)
item 6 key (257 EXTENT_DATA 0) itemoff 15819 itemsize 53
extent data disk byte 12582912 nr 8192
extent data offset 0 nr 8192 ram 8192
item 7 key (257 EXTENT_DATA 8192) itemoff 15766 itemsize 53
extent data disk byte 0 nr 0
extent data offset 0 nr 8192 ram 8192
item 8 key (257 EXTENT_DATA 16384) itemoff 15713 itemsize 53
extent data disk byte 12582912 nr 4096
extent data offset 0 nr 4096 ram 4096
$ umount /dev/sdd
$ btrfsck /dev/sdd
Checking filesystem on /dev/sdd
UUID: db5e60e1-050d-41e6-8c7f-3d742dea5d8f
checking extents
extent item 12582912 has multiple extent items
ref mismatch on [12582912 4096] extent item 1, found 2
Backref bytes do not match extent backref, bytenr=12582912, ref bytes=4096, backref bytes=8192
backpointer mismatch on [12582912 4096]
Errors found in extent allocation tree or chunk allocation
checking free space cache
checking fs roots
root 5 inode 257 errors 1000, some csum missing
found 131074 bytes used err is 1
total csum bytes: 4
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 123404
file data blocks allocated: 274432
referenced 274432
Btrfs v3.14.1-96-gcc7fd5a-dirty
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"The biggest of these comes from Liu Bo, who tracked down a hang we've
been hitting since moving to kernel workqueues (it's a btrfs bug, not
in the generic code). His patch needs backporting to 3.16 and 3.15
stable, which I'll send once this is in.
Otherwise these are assorted fixes. Most were integrated last week
during KS, but I wanted to give everyone the chance to test the
result, so I waited for rc2 to come out before sending"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: fix task hang under heavy compressed write
Btrfs: fix filemap_flush call in btrfs_file_release
Btrfs: fix crash on endio of reading corrupted block
btrfs: fix leak in qgroup_subtree_accounting() error path
btrfs: Use right extent length when inserting overlap extent map.
Btrfs: clone, don't create invalid hole extent map
Btrfs: don't monopolize a core when evicting inode
Btrfs: fix hole detection during file fsync
Btrfs: ensure tmpfile inode is always persisted with link count of 0
Btrfs: race free update of commit root for ro snapshots
Btrfs: fix regression of btrfs device replace
Btrfs: don't consider the missing device when allocating new chunks
Btrfs: Fix wrong device size when we are resizing the device
Btrfs: don't write any data into a readonly device when scrub
Btrfs: Fix the problem that the replace destroys the seed filesystem
btrfs: Return right extent when fiemap gives unaligned offset and len.
Btrfs: fix wrong extent mapping for DirectIO
Btrfs: fix wrong write range for filemap_fdatawrite_range()
Btrfs: fix wrong missing device counter decrease
Btrfs: fix unzeroed members in fs_devices when creating a fs from seed fs
...
The autodefrag code skips defrag when two extents are adjacent. But one
big advantage for autodefrag is cutting down on the number of small
extents, even when they are adjacent. This commit changes it to defrag
all small extents.
Signed-off-by: Chris Mason <clm@fb.com>
This has been reported and discussed for a long time, and this hang occurs in
both 3.15 and 3.16.
Btrfs now migrates to use kernel workqueue, but it introduces this hang problem.
Btrfs has a kind of work queued as an ordered way, which means that its
ordered_func() must be processed in the way of FIFO, so it usually looks like --
normal_work_helper(arg)
work = container_of(arg, struct btrfs_work, normal_work);
work->func() <---- (we name it work X)
for ordered_work in wq->ordered_list
ordered_work->ordered_func()
ordered_work->ordered_free()
The hang is a rare case, first when we find free space, we get an uncached block
group, then we go to read its free space cache inode for free space information,
so it will
file a readahead request
btrfs_readpages()
for page that is not in page cache
__do_readpage()
submit_extent_page()
btrfs_submit_bio_hook()
btrfs_bio_wq_end_io()
submit_bio()
end_workqueue_bio() <--(ret by the 1st endio)
queue a work(named work Y) for the 2nd
also the real endio()
So the hang occurs when work Y's work_struct and work X's work_struct happens
to share the same address.
A bit more explanation,
A,B,C -- struct btrfs_work
arg -- struct work_struct
kthread:
worker_thread()
pick up a work_struct from @worklist
process_one_work(arg)
worker->current_work = arg; <-- arg is A->normal_work
worker->current_func(arg)
normal_work_helper(arg)
A = container_of(arg, struct btrfs_work, normal_work);
A->func()
A->ordered_func()
A->ordered_free() <-- A gets freed
B->ordered_func()
submit_compressed_extents()
find_free_extent()
load_free_space_inode()
... <-- (the above readhead stack)
end_workqueue_bio()
btrfs_queue_work(work C)
B->ordered_free()
As if work A has a high priority in wq->ordered_list and there are more ordered
works queued after it, such as B->ordered_func(), its memory could have been
freed before normal_work_helper() returns, which means that kernel workqueue
code worker_thread() still has worker->current_work pointer to be work
A->normal_work's, ie. arg's address.
Meanwhile, work C is allocated after work A is freed, work C->normal_work
and work A->normal_work are likely to share the same address(I confirmed this
with ftrace output, so I'm not just guessing, it's rare though).
When another kthread picks up work C->normal_work to process, and finds our
kthread is processing it(see find_worker_executing_work()), it'll think
work C as a collision and skip then, which ends up nobody processing work C.
So the situation is that our kthread is waiting forever on work C.
Besides, there're other cases that can lead to deadlock, but the real problem
is that all btrfs workqueue shares one work->func, -- normal_work_helper,
so this makes each workqueue to have its own helper function, but only a
wraper pf normal_work_helper.
With this patch, I no long hit the above hang.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should only be flushing on close if the file was flagged as needing
it during truncate. I broke this with my ordered data vs transaction
commit deadlock fix.
Thanks to Miao Xie for catching this.
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Miao Xie <miaox@cn.fujitsu.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
