Commit Graph

116781 Commits

Author SHA1 Message Date
Stephen Rothwell
a1cf64944f staging: sxg depends on X86
sxghif.h has code that explicitly will not build fo other architecures.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 09:08:23 -07:00
Linus Torvalds
5fdf11283e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netfilter: replace old NF_ARP calls with NFPROTO_ARP
  netfilter: fix compilation error with NAT=n
  netfilter: xt_recent: use proc_create_data()
  netfilter: snmp nat leaks memory in case of failure
  netfilter: xt_iprange: fix range inversion match
  netfilter: netns: use NFPROTO_NUMPROTO instead of NUMPROTO for tables array
  netfilter: ctnetlink: remove obsolete NAT dependency from Kconfig
  pkt_sched: sch_generic: Fix oops in sch_teql
  dccp: Port redirection support for DCCP
  tcp: Fix IPv6 fallout from 'Port redirection support for TCP'
  netdev: change name dropping error codes
  ipvs: Update CONFIG_IP_VS_IPV6 description and help text
2008-10-20 09:06:35 -07:00
Linus Torvalds
2be508d847 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (69 commits)
  Revert "[MTD] m25p80.c code cleanup"
  [MTD] [NAND] GPIO driver depends on ARM... for now.
  [MTD] [NAND] sh_flctl: fix compile error
  [MTD] [NOR] AT49BV6416 has swapped erase regions
  [MTD] [NAND] GPIO NAND flash driver
  [MTD] cmdlineparts documentation change - explain where mtd-id comes from
  [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
  [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
  [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
  [MTD] mtdoops: Fix a bug where block may not be erased
  [MTD] mtdoops: Add a magic number to logged kernel oops
  [MTD] mtdoops: Fix an off by one error
  [JFFS2] Correct parameter names of jffs2_compress() in comments
  [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
  [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
  [MTD] [MAPS] Remove unused variable after ROM API cleanup.
  [MTD] m25p80.c extended jedec support (v2)
  [MTD] remove unused mtd parameter in of_mtd_parse_partitions()
  [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
  [MTD] [NAND] driver extension to support NAND on TQM85xx modules
  ...
2008-10-20 09:03:12 -07:00
Parag Warudkar
01e8ef11bc x86: sysfs: kill owner field from attribute
Tejun's commit 7b595756ec made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Alexey Dobriyan
bb26b963d8 fs/Kconfig: move CIFS out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Adrian Bunk
5a85a7dda1 include/linux/bcd.h: remove comments
- the macros are gone
- there's no more code in this file,
  LGPL + GPL = GPL,
  and the code that was moved to lib/bcd.c is anyway trivial

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Adrian Bunk
a0098efd6e remove the obsolete BCD*BIN/BIN*BCD macros
Remove the following obsolete macros:

- BCD2BIN
- BIN2BCD
- BCD_TO_BIN
- BIN_TO_BCD

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
2cee5dfa8b drivers/scsi/sr_vendor.c: use bcd2bin
Change sr_vendor.c to use the new bcd2bin function instead of the obsolete
BCD2BIN macro.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
e4d33969c2 i2c: use bcd2bin/bin2bcd
Change i2c to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
f6a2298c5f mn10300: use bcd2bin/bin2bcd
Change mn10300 to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
02112dbc92 mips: use bcd2bin/bin2bcd
Changes mips to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Andrew Morton
e232cfdc3d drivers/rtc/rtc-bq4802.c: don't use BIN_2_BCD and BCD_2_BIN
These are going away.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
357c6e6359 rtc: use bcd2bin/bin2bcd
Change various rtc related code to use the new bcd2bin/bin2bcd functions
instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
fe20ba70ab drivers/rtc/: use bcd2bin/bin2bcd
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
4110a0d620 cris: use bcd2bin/bin2bcd
Change cris to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Chris Zankel <zankel@tensilica.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
18b1bd0549 alpha: use bcd2bin/bin2bcd
Change alpha to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
ab527d7578 acpi: use bcd2bin/bin2bcd
Change ACPI to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Adrian Bunk
fdd2e5f88a make mm/rmap.c:anon_vma_cachep static
This patch makes the needlessly global anon_vma_cachep static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Harvey Harrison
1a651a00e2 byteorder: remove direct includes of linux/byteorder/swab[b].h
A consolidated implementation will provide this generically through
asm/byteorder, remove direct includes to avoid breakage when the
changeover to the new implementation occurs.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Harvey Harrison
1d8cca44b6 byteorder: provide swabb.h generically in asm/byteorder.h
This is needed during the transition to the new byteorder headers as the
swabb.h functionality will be provided from asm/byteorder.h in the new
version.  To avoid breakage on arches still using the old implementation,
provide swabb.h from asm/byteorder.h as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Harvey Harrison
acf0108a84 byteorder: use generic C version for value byteswapping
This makes the new implementation of the byteorder helpers match the old
in how it degraded when an arch-defined version was not available:

1) swab()
	- look for arch defined
	- if not, use generic c version

2) swabp()
	- look for arch-defined
	- if not, deref pointer and use swab()

3) swabs()
	- look for arch defined
	- if not, use swabp

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Harvey Harrison
b8e465f494 byteorder: add new headers for make headers-install
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Benjamin Herrenschmidt
3b274f44d2 edac cell: fix incorrect edac_mode
The cell_edac driver is setting the edac_mode field of the csrow's to an
incorrect value, causing the sysfs show routine for that field to go out
of an array bound and Oopsing the kernel when used.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>		[2.6.27.x, 2.6.26.x. 2.6.25.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Andre Haupt
b64fd291ac pc8736x_gpio: add support for PC87365 chips
This is only compile tested, because I do not own appropriate hardware.

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Joe Korty
b231cca438 message queues: increase range limits
Increase the range of various posix message queue limits.

Posix gives the message queue user the ability to 'trade off' the maximum
size of messages with the number of possible messages that can be 'in
flight'.  Linux currently makes this trade off more restrictive than it
needs to be.

In particular, the maximum message size today can be made no smaller than
8192.  This greatly restricts those applications that would like to have
the ability to post large numbers of very small messages.

So this task lowers the limit that the maximum message size can be set to,
from 8192 to 128.  It also lowers the limit that the maximum #number of
messages in flight can be set to, from 10 to 1.

With these changes the message queue user can make better trade offs
between #messages and message size, in order to get everything to fit
within the setrlimit(RLIMIT_MSGQUEUE) limit for that particular user.

This patch also applies the values in

	/proc/sys/fs/mqueue/msg_max
	/proc/sys/fs/mqueue/msgsize_max

as the defaults for the max #messages allowed and the max message size
allowed, respectively, for those applications that do not supply these.
Previously, the defaults were hardwired to 10 and 8192, respectively.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Ken'ichi Ohmichi
acd99dbf54 kdump: add vmlist.addr to vmcoreinfo for x86 vmalloc translation.
Add the symbols 'vmlist' and offset 'vm_struct.addr' to the vmcoreinfo[1]
data for i386 vmalloc translation.

makedumpfile[2] needs VMALLOC_START value for distinguishing a vmalloc
address or not, because it should choose suitable translation method.  If
applying this patch, makedumpfile will be able to take VMALLOC_START value
from 'vmlist.addr'.

vmcoreinfo[1]:
The vmcoreinfo data has the minimum debugging information only for dump
filtering. makedumpfile[2] uses it to distinguish unnecessary pages and
creates a small dumpfile.

makedumpfile[2]:
dump filtering command
https://sourceforge.net/projects/makedumpfile/

Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Simon Horman
d9a9855d0b always reserve elfcore header memory in crash kernel
elfcore header memory needs to be reserved in a crash kernel.  This means
that the relevant code should be protected by CONFIG_CRASH_DUMP rather
than CONFIG_PROC_VMCORE.

Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Simon Horman
85a0ee342e kdump: add is_vmcore_usable() and vmcore_unusable()
The usage of elfcorehdr_addr has changed recently such that being set to
ELFCORE_ADDR_MAX is used by is_kdump_kernel() to indicate if the code is
executing in a kernel executed as a crash kernel.

However, arch/ia64/kernel/setup.c:reserve_elfcorehdr will rest
elfcorehdr_addr to ELFCORE_ADDR_MAX on error, which means any subsequent
calls to is_kdump_kernel() will return 0, even though they should return
1.

Ok, at this point in time there are no subsequent calls, but I think its
fair to say that there is ample scope for error or at the very least
confusion.

This patch add an extra state, ELFCORE_ADDR_ERR, which indicates that
elfcorehdr_addr was passed on the command line, and thus execution is
taking place in a crashdump kernel, but vmcore can't be used for some
reason.  This is tested for using is_vmcore_usable() and set using
vmcore_unusable().  A subsequent patch makes use of this new code.

To summarise, the states that elfcorehdr_addr can now be in are as follows:

ELFCORE_ADDR_MAX: not a crashdump kernel
ELFCORE_ADDR_ERR: crashdump kernel but vmcore is unusable
any other value:  crash dump kernel and vmcore is usable

Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Simon Horman
630bf20747 kdump: use is_kdump_kernel() in sba_init()
o Make use of is_kdump_kernel() rather than checking elfcorehdr_addr directly.

o Remove CONFIG_CRASH_DUMP as is_kdump_kernel() is safe to call anywhere

o Remove CONFIG_PROC_FS as it is bogus, the check
  should occur regardless of if CONFIG_PROC_FS is set or not.

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Simon Horman
e515a0d600 kdump: update elfcorehdr documentation to reflect supported architectures
IA64, PPC and SH also support the elfcorehdr command line.

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:40 -07:00
Vivek Goyal
57cac4d188 kdump: make elfcorehdr_addr independent of CONFIG_PROC_VMCORE
o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE
  but also by the code which is not inside CONFIG_PROC_VMCORE.  For
  example, is_kdump_kernel() is used by powerpc code to determine if
  kernel is booting after a panic then use previous kernel's TCE table.
  So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be
  able to correctly determine that we are booting after a panic and setup
  calgary iommu accordingly.

o So remove the assumption that elfcorehdr_addr is under
  CONFIG_PROC_VMCORE.

o Move definition of elfcorehdr_addr to arch dependent crash files.
  (Unfortunately crash dump does not have an arch independent file
  otherwise that would have been the best place).

o kexec.c is not the right place as one can Have CRASH_DUMP enabled in
  second kernel without KEXEC being enabled.

o I don't see sh setup code parsing the command line for
  elfcorehdr_addr.  I am wondering how does vmcore interface work on sh.
  Anyway, I am atleast defining elfcoredhr_addr so that compilation is not
  broken on sh.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Oleg Nesterov
293adee601 kthread_bind: use wait_task_inactive(TASK_UNINTERRUPTIBLE)
Now that wait_task_inactive(task, state) checks task->state == state,
we can simplify the code and make this debugging check more robust.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Roland McGrath
656eb2cd5d add CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS
This adds a kconfig option to change the /proc/PID/coredump_filter default.
Fedora has been carrying a trivial patch to change the hard-wired value for
this default, since Fedora 8.  The default default can't change safely
because there are old GDB versions out there (all before 6.7) that are
confused by the core dump files created by the MMF_DUMP_ELF_HEADERS setting.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Oleg Nesterov
6409324b38 coredump: format_corename: don't append .%pid if multi-threaded
If the coredumping is multi-threaded, format_corename() appends .%pid to
the corename.  This was needed before the proper multi-thread core dump
support, now all the threads in the mm go into a single unified core file.

Remove this special case, it is not even documented and we have "%p"
and core_uses_pid.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: La Monte Yarroll <piggy@laurelnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Adrian Bunk
b747c8c102 make ptrace_untrace() static
ptrace_untrace() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Lai Jiangshan
c459643540 bitmask: remove bitmap_scnprintf_len()
bitmap_scnprintf_len() is not used now, so we remove it.

Otherwise we have to maintain it and make its return
value always equal to bitmap_scnprintf()'s return value.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Lai Jiangshan
30e8e13603 cpuset: use seq_*mask_* to print masks
1) seq_file excepts that m->count == m->size when it's buf is full,
   so current code will causes bugs when buf is overflow.

2) There is not too good that cpuset accesses struct seq_file's
   fields directly.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Lai Jiangshan
3eda201180 seq_file: add seq_cpumask_list(), seq_nodemask_list()
seq_cpumask_list(), seq_nodemask_list() are very like seq_cpumask(),
seq_nodemask(), but they print human readable string.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Lai Jiangshan
85dd030edb seq_file: don't call bitmap_scnprintf_len()
"m->count + len < m->size" is true commonly, so bitmap_scnprintf()
is commonly called. this fix saves a call to bitmap_scnprintf_len().

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Rakib Mullick
40b6a76237 cpuset.c: remove extra variable
Remove the use of int cpus_nonempty variable from 'update_flag' function.

Signed-off-by: Md.Rakib H. Mullick <rakib.mullick@gmail.com>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
KAMEZAWA Hiroyuki
52d4b9ac0b memcg: allocate all page_cgroup at boot
Allocate all page_cgroup at boot and remove page_cgroup poitner from
struct page.  This patch adds an interface as

 struct page_cgroup *lookup_page_cgroup(struct page*)

All FLATMEM/DISCONTIGMEM/SPARSEMEM  and MEMORY_HOTPLUG is supported.

Remove page_cgroup pointer reduces the amount of memory by
 - 4 bytes per PAGE_SIZE.
 - 8 bytes per PAGE_SIZE
if memory controller is disabled. (even if configured.)

On usual 8GB x86-32 server, this saves 8MB of NORMAL_ZONE memory.
On my x86-64 server with 48GB of memory, this saves 96MB of memory.
I think this reduction makes sense.

By pre-allocation, kmalloc/kfree in charge/uncharge are removed.
This means
  - we're not necessary to be afraid of kmalloc faiulre.
    (this can happen because of gfp_mask type.)
  - we can avoid calling kmalloc/kfree.
  - we can avoid allocating tons of small objects which can be fragmented.
  - we can know what amount of memory will be used for this extra-lru handling.

I added printk message as

	"allocated %ld bytes of page_cgroup"
        "please try cgroup_disable=memory option if you don't want"

maybe enough informative for users.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
KAMEZAWA Hiroyuki
c05555b572 memcg: atomic ops for page_cgroup->flags
This patch makes page_cgroup->flags to be atomic_ops and define functions
(and macros) to access it.

Before trying to modify memory resource controller, this atomic operation
on flags is necessary.  Most of flags in this patch is for LRU and modfied
under mz->lru_lock but we'll add another flags which is not for LRU soon.
For example, we'll place LOCK bit on flags field.  We need atomic
operation to modify LRU bit without LOCK.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
KAMEZAWA Hiroyuki
addb9efebb memcg: optimize per-cpu statistics
Some obvious optimization to memcg.

I found mem_cgroup_charge_statistics() is a little big (in object) and
does unnecessary address calclation.  This patch is for optimization to
reduce the size of this function.

And res_counter_charge() is 'likely' to succeed.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
KAMEZAWA Hiroyuki
5b4e655e94 memcg: avoid accounting special pages
There are not-on-LRU pages which can be mapped and they are not worth to
be accounted.  (becasue we can't shrink them and need dirty codes to
handle specical case) We'd like to make use of usual objrmap/radix-tree's
protcol and don't want to account out-of-vm's control pages.

When special_mapping_fault() is called, page->mapping is tend to be NULL
and it's charged as Anonymous page.  insert_page() also handles some
special pages from drivers.

This patch is for avoiding to account special pages.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
KAMEZAWA Hiroyuki
b7abea9630 memcg: make page->mapping NULL before uncharge
This patch tries to make page->mapping to be NULL before
mem_cgroup_uncharge_cache_page() is called.

"page->mapping == NULL" is a good check for "whether the page is still
radix-tree or not".  This patch also adds BUG_ON() to
mem_cgroup_uncharge_cache_page();

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
KAMEZAWA Hiroyuki
073e587ec2 memcg: move charge swapin under lock
While page-cache's charge/uncharge is done under page_lock(), swap-cache
isn't.  (anonymous page is charged when it's newly allocated.)

This patch moves do_swap_page()'s charge() call under lock.  I don't see
any bad problem *now* but this fix will be good for future for avoiding
unnecessary racy state.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
Lai Jiangshan
47c59803be devcgroup: remove spin_lock()
Since we introduced rcu for read side, spin_lock is used only for update.
But we always hold cgroup_lock() when update, so spin_lock() is not need.

Additional cleanup:
1) include linux/rcupdate.h explicitly
2) remove unused variable cur_devcgroup in devcgroup_update_access()

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
Li Zefan
c012a54ae0 devcgroup: remove unused variable
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
Li Zefan
2cdc7241a2 devcgroup: use kmemdup()
This saves 40 bytes on my x86_32 box.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
Paul Menage
886465f407 cgroups: fix declaration of cgroup_mm_owner_callbacks
The choice of real/dummy declaration for cgroup_mm_owner_callbacks()
shouldn't be based on CONFIG_MM_OWNER, but on CONFIG_CGROUPS.  Otherwise
kernel/exit.c fails to compile when something other than a cgroups
controller selects CONFIG_MM_OWNER

Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00