Commit Graph

12 Commits

Author SHA1 Message Date
Masahiro Yamada
1658b84de4 ARM: dts: uniphier: fix W=2 build warnings
Fix warnings like follows:

Warning (node_name_chars_strict): Character '_' not recommended in ...

Commit 8654cb8d03 ("dtc: update warning settings for new bus and
node/property name checks") says these checks are a bit subjective,
but Rob also says to not add new W=2 warnings.

The exising warnings should be fixed in order to catch new ones
easily.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 21:10:11 +09:00
Kunihiko Hayashi
8a7a516afa ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
Add pinctrl groups of ethenet phy mode, such as "ether_rgmii", "ether_rmii",
and "ether_mii".

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-29 00:00:43 +09:00
Katsuhiro Suzuki
d3a48c6c0a ARM: dts: uniphier: add audio out pin-mux node
The UniPhier AIO2013 audio system needs I2S and clock signal pins
to connect external codec chip.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-10 00:51:51 +09:00
Masahiro Yamada
4376f01a1c ARM: dts: uniphier: use SPDX-License-Identifier (2nd)
Commit fa53757bca ("ARM: dts: uniphier: use SPDX-License-Identifier")
missed to touch these two.  Now updating.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-16 12:23:45 +09:00
Masahiro Yamada
66b2f56776 ARM: dts: uniphier: fix pin groups of eMMC pin-mux node
The eMMC devices on UniPhier boards are generally used in the 8-bit
mode.  So, DAT4-7 pins should be controlled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-03-12 01:54:15 +09:00
Masahiro Yamada
74b51465c0 ARM: dts: uniphier: add SD pin-mux node
The Pro4 SoC has 2 slots of SD controllers, so 2 pin-mux nodes
(SD and SD1) are needed.  The other SoCs have only 1 SD slot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 22:21:54 +09:00
Masahiro Yamada
e1bd326f4c ARM: dts: uniphier: add eMMC pin-mux node
All UniPhier SoCs support an eMMC controller.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 22:19:40 +09:00
Masahiro Yamada
fdaf72e52f ARM: dts: uniphier: add System Bus pinmux node
This pin-muxing is needed to get access to the UniPhier System Bus.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 10:36:27 -07:00
Masahiro Yamada
62547ba352 ARM: dts: uniphier: add NAND pinmux node
This commit adds pin-mux nodes for the NAND controller.
Some SoCs support 2 chip selects and the others only support
1 chip select.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-24 23:38:18 +02:00
Masahiro Yamada
413b321b32 ARM: dts: uniphier: add pinmux node for I2C ch4
This will be needed for UniPhier PH1-LD11 and PH1-LD20 SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 17:42:29 +01:00
Masahiro Yamada
68f46897ea ARM: dts: uniphier: add I2C controller device nodes
Add I2C controller device nodes for PH1-sLD3, PH1-LD4, PH1-sLD8
(FIFO-less I2C) and PH1-Pro4 (FIFO-builtin I2C).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-11 15:09:21 +02:00
Masahiro Yamada
622372309f ARM: dts: UniPhier: add UART and USB pinmux nodes
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl
settings that would be suitable for most boards.  You can still
override them in your board DTS file if necessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27 14:54:47 +02:00