* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits)
media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
hexdump: avoid warning in test function
fs: take i_mutex during prepare_binprm for set[ug]id executables
smp: Fix error case handling in smp_call_function_*()
iommu-common: Fix PARISC compile-time warnings
sparc: Make LDC use common iommu poll management functions
sparc: Make sparc64 use scalable lib/iommu-common.c functions
Break up monolithic iommu table/lock into finer graularity pools and lock
sparc: Revert generic IOMMU allocator.
tools/power turbostat: correct dumped pkg-cstate-limit value
tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
tools/power turbostat: Initial Skylake support
tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
tools/power turbostat: modprobe msr, if needed
tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
Bluetooth: hidp: Fix regression with older userspace and flags validation
config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
...
That solves several merge conflicts:
Documentation/DocBook/media/v4l/subdev-formats.xml
Documentation/devicetree/bindings/vendor-prefixes.txt
drivers/staging/media/mn88473/mn88473.c
include/linux/kconfig.h
include/uapi/linux/media-bus-format.h
The ones at subdev-formats.xml and media-bus-format.h are not trivial.
That's why we opted to merge from DRM.
The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.
I've included the patch into the merge to fix the build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change the constant values for RGB444_1X12, RGB565_1X16, and YUV8_1X24 media
bus formats in anticipation of a merge conflict with the media tree, where
the old values are already taken by RBG888_1X24, RGB888_1X32_PADHI, and
VUY8_1X24, respectively.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Document new flag V4L2_CTRL_FLAG_EXECUTE_ON_WRITE, and the new behavior
of CH_VALUE event on VOLATILE controls.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Keep the formats sorted by type, bus_width, bits per component, samples
per pixel and order of subsamples, in that order.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support and documentation for two media bus formats:
MEDIA_BUS_FMT_RBG888_1X24 and MEDIA_BUS_FMT_RGB888_1X32_PADHI
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
While running v4l2-compliance tests on vivid I suddenly got errors due to
a call to vmalloc_user with size 0 from vb2.
Digging deeper into the cause I discovered that this was due to the fact that
struct v4l2_plane_pix_format defines bytesperline as a __u16 instead of a __u32.
The test I was running selected a format of 4 * 4096 by 4 * 2048 with a 32
bit pixelformat.
So bytesperline was 4 * 4 * 4096 = 65536, which becomes 0 in a __u16. And
bytesperline * height is suddenly 0 as well. While the vivid driver may be
a virtual driver, it is to be expected that this limit will be hit for real
hardware as well in the near future: 8k deep-color video will already reach
it.
The solution is to change the type to __u32. The only drivers besides vivid
that use the multiplanar API are little-endian ARM and SH platforms (exynos,
ti-vpe, vsp1), so this is safe.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This fixes the bibliography hyperlink to "http://www.eia.org"
which now redirects to a page with a "404 Not found" error.
The latest update to the document referred to is now available
on the Consumer Electronics Association website.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Explicitly specify where the half-line is added or removed in
each field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
One number was wrong (0.6789 -> 0.6780) and Y' should have been Yc'.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It always annoyed me that the event type documentation was separate from the struct
v4l2_event documentation. This patch moves it all to one place, VIDIOC_DQEVENT.
This makes much more sense.
Also changed the 'changes-flags' ref to 'ctrl-changes-flags' since this referred to
control changes. There is a src-changes-flags as well, so 'changes-flags' was a bit
vague.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix some awkward language in the VIDIOC_QUERYCAP description.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The type field of VIDIOC_CROPCAP does not allow the MPLANE variants, just
as all the other crop/selection related ioctls.
Fix the description of CROPCAP and G_CROP and make the text describing
this consistent for all selection ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The documentation is not clear whether this is a three or four byte
format. Clarify this.
Also move the BGR666 format to the other 32 bit formats.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix the example of the V4L2_PIX_FMT_SGRBG8 Bayer format.
The even lines should read BGBG, not RBRB.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The colorspace section IDs were assigned to the title instead of to the
section. Some links failed because of that.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The documentation says that the bytesperline field in v4l2_pix_format refers
to the largest plane in the case of planar formats (i.e. multiple planes
stores in a single buffer).
For almost all planar formats the first plane is also the largest (or equal)
plane, except for two formats: V4L2_PIX_FMT_NV24/NV42. For this YUV 4:4:4
format the second chroma plane is twice the size of the first luma plane.
Looking at the very few drivers that support this format the bytesperline
value that they report is actually that of the first plane and not that
of the largest plane.
Rather than fixing the drivers it makes more sense to update the documentation
since it is very difficult to use the largest plane for this. You would have
to check what the format is in order to know to which plane bytesperline
belongs, which makes calculations much more difficult.
This patch updates the documentation accordingly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In contrast to all other colorspaces, the BT.2020 colorspace uses
limited range R'G'B' quantization as the default.
This was incorrected documented, so fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The denominator for the scaling and offsets is 256, not 255. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 9e74d2926a ("staging: imx-drm: add LVDS666 support for parallel
display") describes a 24-bit bus format where three 6-bit components each
take the lower part of 8 bits with the two high bits zero padded. Add a
component-wise padded media bus format RGB666_1X24_CPADHI to support this
connection.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
This patch adds the media bus format for a 24-bit bus format with three
8-bit YUV components.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
This patch adds two more 24-bit RGB formats. BGR888 is more or less common,
GBR888 is used on the internal connection between the IPU display interface
and the TVE (VGA DAC) on i.MX53 SoCs.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
This patch adds three new RGB media bus formats that describe
18-bit or 24-bit samples transferred over an LVDS bus with three
or four differential data pairs, serialized into 7 time slots,
using standard SPWG/PSWG/VESA or JEIDA data ordering.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Add RGB444_1X12 and RGB565_1X16 format definitions and update the
documentation.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This fixes the bibliography hyperlink to "http://www.eia.org"
which now redirects to a page with a "404 Not found" error.
The latest update to the document referred to is now available
on the Consumer Electronics Association website.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The documentation of the xvYCC601 Y'CbCr encoding was part of the SMPTE 170M
(SDTV) colorspace, but it should have been part of the Rec. 709 (HDTV) colorspace
as per the xvYCC standard.
This change only affects the documentation and not any code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The alsa struct in struct media_entity_desc is now marked as deprecated.
However, the alsa struct should remain as it is since it cannot be replaced
by a simple major/minor device node description. The alsa struct was designed
to be used as an alsa card description so V4L2 drivers could use this to expose
the alsa card that they create to carry the captured audio. Such a card is not
just a PCM device, but also needs to contain the alsa subdevice information,
and it may map to multiple devices, e.g. a PCM and a mixer device, such as the
au0828 usb stick creates.
This is exactly as intended and this cannot and should not be replaced by a
simple major/minor.
However, whether this information is in the right form for an ALSA device such
that it can handle udev renaming rules as well is another matter. So mark this
alsa struct as TODO and document the problems involved.
Updated the documentation as well to reflect this and to add the 'major'
and 'minor' field documentation.
Updated the documentation to clearly state that struct dev is to be used for
(sub-)devices that create a single device node. Other devices need their own
structure here.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The DVB API is actually several different APIs bundled together, each
using its own device node.
Fix the media controller DVB API to actually reflect what's there at the
DVB subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The media-ctl userspace application assumes that all device nodes
are uniquelly defined via major,minor, just like v4l and fb.
That's ok for those types of devices, but, as we're adding support
for DVB at the API, what's written there at the DocBook is wrong.
So, fix it.
While here, fix the size of the reserved space inside the union,
with is 184, and not 180.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE control
is a boolean but was documented as a integer. The documentation was
also slightly miss-leading.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
These formats are just like 10-bit raw bayer formats that exist already, but
the pixels are not padded to byte boundaries. Instead, the eight high order
bits of four consecutive pixels are stored in four bytes, followed by a byte
of two low order bits of each of the four pixels.
Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The documentation began with "The following four pixel formats"... but the
format definitions preceded this sentence. Replace it with "These four pixel
formats".
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1) This is not allowed by the kernel coding style
2) Just configure your editor correctly
3) It's really ugly
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
I forgot to add these fields to the relevant structs.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add input and output capability flags for setting native size of the device,
and document them.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The V4L2_SEL_TGT_NATIVE_SIZE target is used to denote e.g. the size of a
sensor's pixel array.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The sub-device format documentation documented scaling configuration through
formats. Instead the compose selection rectangle is elsewhere documented to
be used for the purpose. Remove scaling related part of the documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The colorspace chapter in the V4L2 Specification was always poorly
written. This patch rewrites it, documenting the new Y'CbCr encoding
and quantization defines and going into much more detail with respect
to how colorspaces are used and what it all means.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed them with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.
Update the v4l documentation accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Needed due to some important regression fixes at RC core.
* commit 'v3.18-rc4': (587 commits)
Linux 3.18-rc4
ARM: dts: zynq: Enable PL clocks for Parallella
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
tiny: reverse logic for DISABLE_DEV_COREDUMP
i2c: core: Dispose OF IRQ mapping at client removal time
i2c: at91: don't account as iowait
i2c: remove FSF address
USB: Update default usb-storage delay_use value in kernel-parameters.txt
sysfs: driver core: Fix glue dir race condition by gdp_mutex
MIPS: Fix build with binutils 2.24.51+
xfs: track bulkstat progress by agino
xfs: bulkstat error handling is broken
xfs: bulkstat main loop logic is a mess
xfs: bulkstat chunk-formatter has issues
xfs: bulkstat chunk formatting cursor is broken
xfs: bulkstat btree walk doesn't terminate
mm: Fix comment before truncate_setsize()
USB: cdc-acm: add quirk for control-line state requests
tty: Fix pty master poll() after slave closes v2
MIPS: R3000: Fix debug output for Virtual page number
...
Conflicts:
drivers/media/rc/rc-main.c
Documentation for enum v4l2_field did not make it clear that V4L2_FIELD_ANY
is only acceptable as input to the kernel, not as a response from the
driver.
Make it clear, to stop userspace developers like me assuming it can be
returned by the driver.
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull documentation fixes from Jonathan Corbet:
"So this is my first pull request since I rashly agreed to look after
the documentation subtree. It contains some typo fixes, a few minor
documentation improvements, and, most importantly, fixes for a couple
of build problems in various bits of sample code.
I fully intend to start sending pull requests with signed tags.
However, due to poor planning on my part and the general obnoxiousness
of life, I'm 2000 miles away from my private key which is sitting on a
powered-down machine. This should be fixed before my next request.
Meanwhile git.lwn.net is a machine under my control, the patches are
all trivial, and all have done time in linux-next"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
Documentation/SubmittingPatches: Reported-by tags and permission
Documentation: remove outdated references to the linux-next wiki
Documentation: Restrict TSC test code to x86
doc: kernel-parameters.txt: Add ide-generic.probe-mask
vdso: don't require 64-bit math in standalone test
Documentation: Add CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF case
Documentation: Add default kmemleak off case in kernel-parameters.txt
Docs: Document that the sticky bit is understood by hugetlbfs
DocBook: Reduce noise from make cleandocs
Documentation: fix vdso_standalone_test_x86 on 32-bit
Documentation: dt-bindings: Explain order in patch series
Documentation/ABI/testing/sysfs-ibft: fix a typo
FE_SET_PROPERTY requires to open the devnode on R/W mode, or
otherwise it will fail. Document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
