Since commits
c041b5ad86 ("x86, boot: Create a separate string.h file to provide standard string functions")
fb4cac573e ("x86, boot: Move memcmp() into string.h and string.c")
the decompressor stub has been using the compiler's builtin memcpy,
memset and memcmp functions, _except_ where it would likely have the
largest impact, in the decompression code itself.
Remove the #undef's of memcpy and memset in misc.c so that the
decompressor code also uses the compiler builtins.
The rationale given in the comment doesn't really apply: just because
some functions use the out-of-line version is no reason to not use the
builtin version in the rest.
Replace the comment with an explanation of why memzero and memmove are
being #define'd.
Drop the suggestion to #undef in boot/string.h as well: the out-of-line
versions are not really optimized versions, they're generic code that's
good enough for the preboot environment. The compiler will likely
generate better code for constant-size memcpy/memset/memcmp if it is
allowed to.
Most decompressors' performance is unchanged, with the exception of LZ4
and 64-bit ZSTD.
Before After ARCH
LZ4 73ms 10ms 32
LZ4 120ms 10ms 64
ZSTD 90ms 74ms 64
Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels.
Decompressor code size has small differences, with the largest being
that 64-bit ZSTD decreases just over 2k. The largest code size increase
was on 64-bit XZ, of about 400 bytes.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Nick Terrell <nickrterrell@gmail.com>
Tested-by: Nick Terrell <nickrterrell@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl8wJXEVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGMGEP/0jDq/WafbfPN0aU83EqEWLt/sKg
bluzmf/6HGx3XVRnuAzsHNNqysUx77WJiDsU/jbC/zdH8Iox3Sc1diE2sELLNAfY
iJmQ8NBPggyU74aYG3OJdpDjz8T9EX/nVaYrjyFlbuXElM+Qvo8Z4Fz6NpWqKWlA
gU+yGxEPPdX6MLHcSPSIu1hGWx7UT4fgfx3zDFTI2qvbQgQjKtzyTjAH5Cm3o87h
rfomvHSSoAUg+Fh1LediRh1tJlkdVO+w7c+LNwCswmdBtkZuxecj1bQGUTS8GaLl
CCWOKYfWp0KsVf1veXNNNaX/ecbp+Y34WErFq3V9Fdq5RmVlp+FPSGMyjDMRiQ/p
LGvzbJLPpG586MnK8of0dOj6Es6tVPuq6WH2HuvsyTGcZJDpFTTxRcK3HDkE8ig6
ZtuM3owB/Mep8IzwY2yWQiDrc7TX5Fz8S4hzGPU1zG9cfj4VT6TBqHGAy1Eql/0l
txj6vJpnbQSdXiIX8MIU3yH35Y7eW3JYWgspTZH5Woj1S/wAWwuG93Fuuxq6mQIJ
q6LSkMavtOfuCjOA9vJBZewpKXRU6yo0CzWNL/5EZ6z/r/I+DGtfb/qka8oYUDjX
9H0cecL37AQxDHRPTxCZDQF0TpYiFJ6bmnMftK9NKNuIdvsk9DF7UBa3EdUNIj38
yKS3rI7Lw55xWuY3
=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
- Add support for zstd compressed kernel
- Define __DISABLE_EXPORTS in Makefile
- Remove __DISABLE_EXPORTS definition from kaslr.c
- Bump the heap size for zstd.
- Update the documentation.
Integrates the ZSTD decompression code to the x86 pre-boot code.
Zstandard requires slightly more memory during the kernel decompression
on x86 (192 KB vs 64 KB), and the memory usage is independent of the
window size.
__DISABLE_EXPORTS is now defined in the Makefile, which covers both
the existing use in kaslr.c, and the use needed by the zstd decompressor
in misc.c.
This patch has been boot tested with both a zstd and gzip compressed
kernel on i386 and x86_64 using buildroot and QEMU.
Additionally, this has been tested in production on x86_64 devices.
We saw a 2 second boot time reduction by switching kernel compression
from xz to zstd.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-7-nickrterrell@gmail.com
Bump the ZO_z_extra_bytes margin for zstd.
Zstd needs 3 bytes per 128 KB, and has a 22 byte fixed overhead.
Zstd needs to maintain 128 KB of space at all times, since that is
the maximum block size. See the comments regarding in-place
decompression added in lib/decompress_unzstd.c for details.
The existing code is written so that all the compression algorithms use
the same ZO_z_extra_bytes. It is taken to be the maximum of the growth
rate plus the maximum fixed overhead. The comments just above this diff
state that:
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-6-nickrterrell@gmail.com
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the
recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to
get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option is
not sufficient, it needs an explicit -fno-stack-protector to shut it
off.
- Mark check_user_regs() noinstr as it is called from noinstr code. The
missing annotation causes it to be placed in the text section which
makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from ASM
code.
-----BEGIN PGP SIGNATURE-----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=QAeH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
Some Makefiles already pass -ffreestanding unconditionally.
For example, arch/arm64/lib/Makefile, arch/x86/purgatory/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -ffreestanding.
I confirmed GCC 4.8 and Clang manuals document this option.
Get rid of cc-option from -ffreestanding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Commit
17054f492d ("efi/x86: Implement mixed mode boot without the handover protocol")
introduced a new entry point for the EFI stub to be booted in mixed mode
on 32-bit firmware.
When entered via efi32_pe_entry, control is first transferred to
startup_32 to setup for the switch to long mode, and then the EFI stub
proper is entered via efi_pe_entry. efi_pe_entry is an MS ABI function,
and the ABI requires 32 bytes of shadow stack space to be allocated by
the caller, as well as the stack being aligned to 8 mod 16 on entry.
Allocate 40 bytes on the stack before switching to 64-bit mode when
calling efi_pe_entry to account for this.
For robustness, explicitly align boot_stack_end to 16 bytes. It is
currently implicitly aligned since .bss is cacheline-size aligned,
head_64.o is the first object file with a .bss section, and the heap and
boot sizes are aligned.
Fixes: 17054f492d ("efi/x86: Implement mixed mode boot without the handover protocol")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200617131957.2507632-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=idS6
-----END PGP SIGNATURE-----
Merge tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
"Misc dependency fixes, plus a documentation update about memory
protection keys support"
* tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Update config and kernel doc for MPK feature on AMD
x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux
x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY
x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage
x86/boot/build: Add cpustr.h to targets and remove clean-files
- Add the initrdmem= boot option to specify an initrd embedded in RAM (flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES.
- Various fixes and smaller cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U/uh
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc updates:
- Add the initrdmem= boot option to specify an initrd embedded in RAM
(flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES
- Various fixes and smaller cleanups"
* tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Correct relocation destination on old linkers
x86/boot/compressed/64: Switch to __KERNEL_CS after GDT is loaded
x86/boot: Fix -Wint-to-pointer-cast build warning
x86/boot: Add kstrtoul() from lib/
x86/tboot: Mark tboot static
x86/setup: Add an initrdmem= option to specify initrd physical address
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl7Lb8UACgkQwjcgfpV0
+n3/aAgAkEqqR/BoyzFiyYHujq6bXjESKYr8LrIjNWfnofB6nZqp1yXwFdL0qbj/
PTZ1qIQAnOMmj11lvy1X894h2ZLqE6XEkqv7Xd2oxkh3fF6amlQUWfMpXUuGLo1k
C4QGSfA0OOiM0OOi0Aqk1fL7sTmH23/j63dTR+fH8JMuYgjdls/yWNs0miqf8W2H
ftj8fAKgHIJzFvdTC0vn1DZ6dEKczGLPEcVZ2ns2IJOJ69DsStKPLcD0mlW+EgV2
EyfRSCQv55RYZRhdUOb+yVLRfU0M0IMDrrCDErHxZHXnQy00tmKXiEL20yuegv3u
MUtRRw8ocn2/RskjgZkxtMjAAlty9A==
=AwCh
-----END PGP SIGNATURE-----
Merge tag 'efi-changes-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI changes for v5.8:
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Conflicts:
drivers/firmware/efi/libstub/efistub.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of using efi_gdt64 to switch back to 64-bit mode and then
switching to the real boot-time GDT, just switch to the boot-time GDT
directly. The two GDT's are identical other than efi_gdt64 not including
the 32-bit code segment.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200523221513.1642948-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
With commit
ce5e3f909f ("efi/printf: Add 64-bit and 8-bit integer support")
arch/x86/boot/compressed/vmlinux may have an undesired .discard.unreachable
section coming from drivers/firmware/efi/libstub/vsprintf.stub.o. That section
gets generated from unreachable() annotations when CONFIG_STACK_VALIDATION is
enabled.
.discard.unreachable contains an R_X86_64_PC32 relocation which will be
warned about by LLD: a non-SHF_ALLOC section (.discard.unreachable) is
not part of the memory image, thus conceptually the distance between a
non-SHF_ALLOC and a SHF_ALLOC is not a constant which can be resolved at
link time:
% ld.lld -m elf_x86_64 -T arch/x86/boot/compressed/vmlinux.lds ... -o arch/x86/boot/compressed/vmlinux
ld.lld: warning: vsprintf.c:(.discard.unreachable+0x0): has non-ABS relocation R_X86_64_PC32 against symbol ''
Reuse the DISCARDS macro which includes .discard.* to drop
.discard.unreachable.
[ bp: Massage and complete the commit message. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20200520182010.242489-1-maskray@google.com
For the 32-bit kernel, as described in
6d92bc9d48 ("x86/build: Build compressed x86 kernels as PIE"),
pre-2.26 binutils generates R_386_32 relocations in PIE mode. Since the
startup code does not perform relocation, any reloc entry with R_386_32
will remain as 0 in the executing code.
Commit
974f221c84 ("x86/boot: Move compressed kernel to the end of the
decompression buffer")
added a new symbol _end but did not mark it hidden, which doesn't give
the correct offset on older linkers. This causes the compressed kernel
to be copied beyond the end of the decompression buffer, rather than
flush against it. This region of memory may be reserved or already
allocated for other purposes by the bootloader.
Mark _end as hidden to fix. This changes the relocation from R_386_32 to
R_386_RELATIVE even on the pre-2.26 binutils.
For 64-bit, this is not strictly necessary, as the 64-bit kernel is only
built as PIE if the linker supports -z noreloc-overflow, which implies
binutils-2.27+, but for consistency, mark _end as hidden here too.
The below illustrates the before/after impact of the patch using
binutils-2.25 and gcc-4.6.4 (locally compiled from source) and QEMU.
Disassembly before patch:
48: 8b 86 60 02 00 00 mov 0x260(%esi),%eax
4e: 2d 00 00 00 00 sub $0x0,%eax
4f: R_386_32 _end
Disassembly after patch:
48: 8b 86 60 02 00 00 mov 0x260(%esi),%eax
4e: 2d 00 f0 76 00 sub $0x76f000,%eax
4f: R_386_RELATIVE *ABS*
Dump from extract_kernel before patch:
early console in extract_kernel
input_data: 0x0207c098 <--- this is at output + init_size
input_len: 0x0074fef1
output: 0x01000000
output_len: 0x00fa63d0
kernel_total_size: 0x0107c000
needed_size: 0x0107c000
Dump from extract_kernel after patch:
early console in extract_kernel
input_data: 0x0190d098 <--- this is at output + init_size - _end
input_len: 0x0074fef1
output: 0x01000000
output_len: 0x00fa63d0
kernel_total_size: 0x0107c000
needed_size: 0x0107c000
Fixes: 974f221c84 ("x86/boot: Move compressed kernel to the end of the decompression buffer")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200207214926.3564079-1-nivedita@alum.mit.edu
Mike Lothian reports that after commit
964124a97b ("efi/x86: Remove extra headroom for setup block")
gcc 10.1.0 fails with
HOSTCC arch/x86/boot/tools/build
/usr/lib/gcc/x86_64-pc-linux-gnu/10.1.0/../../../../x86_64-pc-linux-gnu/bin/ld:
error: linker defined: multiple definition of '_end'
/usr/lib/gcc/x86_64-pc-linux-gnu/10.1.0/../../../../x86_64-pc-linux-gnu/bin/ld:
/tmp/ccEkW0jM.o: previous definition here
collect2: error: ld returned 1 exit status
make[1]: *** [scripts/Makefile.host:103: arch/x86/boot/tools/build] Error 1
make: *** [arch/x86/Makefile:303: bzImage] Error 2
The issue is with the _end variable that was added, to hold the end of
the compressed kernel from zoffsets.h (ZO__end). The name clashes with
the linker-defined _end symbol that indicates the end of the build
program itself.
Even when there is no compile-time error, this causes build to use
memory past the end of its .bss section.
To solve this, mark _end as static, and for symmetry, mark the rest of
the variables that keep track of symbols from the compressed kernel as
static as well.
Fixes: 964124a97b ("efi/x86: Remove extra headroom for setup block")
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200511225849.1311869-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the pre-decompression code loads its first GDT in startup_64(), it
is still running on the CS value of the previous GDT. In the case of
SEV-ES, this is the EFI GDT but it can be anything depending on what has
loaded the kernel (boot loader, container runtime, etc.)
To make exception handling work (especially IRET) the CPU needs to
switch to a CS value in the current GDT, so jump to __KERNEL_CS after
the first GDT is loaded. This is prudent also as a general sanitization
of CS to a known good value.
[ bp: Massage commit message. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200428151725.31091-13-joro@8bytes.org
Fix this warning when building 32-bit with
CONFIG_RANDOMIZE_BASE=y
CONFIG_MEMORY_HOTREMOVE=y
arch/x86/boot/compressed/acpi.c:316:9: warning: \
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Have get_cmdline_acpi_rsdp() return unsigned long which is the proper
type to convert to a pointer of the respective width.
[ bp: Rewrite commit message, touch ups. ]
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1587645588-7130-3-git-send-email-vamshi.k.sthambamkadi@gmail.com
Add kstrtoul() to ../boot/ to be used by facilities there too.
[
bp: Massage, make _kstrtoul() static. Prepend function names with
"boot_". This is a temporary workaround for build errors like:
ld: arch/x86/boot/compressed/acpi.o: in function `count_immovable_mem_regions':
acpi.c:(.text+0x463): undefined reference to `_kstrtoul'
make[2]: *** [arch/x86/boot/compressed/Makefile:117: arch/x86/boot/compressed/vmlinux] Error 1
due to the namespace clash between x86/boot/ and kernel proper.
Future reorg will get rid of the linux/linux/ namespace as much as
possible so that x86/boot/ can be independent from kernel proper. ]
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1587645588-7130-2-git-send-email-vamshi.k.sthambamkadi@gmail.com
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Add relocation checking for x86 as well to catch non-PC-relative
relocations that require runtime processing, since the EFI stub does not
do any runtime relocation processing.
This will catch, for example, data relocations created by static
initializers of pointers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200416151227.3360778-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
These targets are correctly added to PHONY in arch/x86/Makefile, but
not in arch/x86/boot/Makefile. Thus, with a file 'install' in the top
directory, 'make install' does nothing:
$ touch install
$ make install
make[1]: 'install' is up to date.
Add them to the PHONY targets in the boot Makefile too.
[ bp: Massage. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063852.8298-2-masahiroy@kernel.org
bzlilo is an installation target because it copies files to
$(INSTALL_PATH)/, then runs 'lilo'. However, arch/x86/Makefile and
arch/x86/boot/Makefile have it depend on vmlinux and $(obj)/bzImage,
respectively.
'make bzlilo' may update some build artifacts in the source tree.
As commit
19514fc665 ("arm, kbuild: make "make install" not depend on vmlinux")
explained, this should not happen.
Make 'bzlilo' not depend on any build artifact.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063852.8298-1-masahiroy@kernel.org
Files in $(targets) are always cleaned up. Move the 'targets' assignment
out of the ifdef and remove 'clean-files'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063241.7437-1-masahiroy@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups and small enhancements all around the map"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Fix debug_puthex() parameter type
x86/setup: Fix static memory detection
x86/vmlinux: Drop unneeded linker script discard of .eh_frame
x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
x86/boot/compressed: Remove .eh_frame section from bzImage
x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
x86/boot/compressed/64: Use LEA to initialize boot stack pointer
In the CONFIG_X86_VERBOSE_BOOTUP=Y case, the debug_puthex() macro just
turns into __puthex(), which takes 'unsigned long' as parameter.
But in the CONFIG_X86_VERBOSE_BOOTUP=N case, it is a function which
takes 'unsigned char *', causing compile warnings when the function is
used. Fix the parameter type to get rid of the warnings.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200319091407.1481-11-joro@8bytes.org
Add alignment slack to the PE image size, so that we can realign the
decompression buffer within the space allocated for the image.
Only relocate the kernel if it has been loaded at an unsuitable address:
- Below LOAD_PHYSICAL_ADDR, or
- Above 64T for 64-bit and 512MiB for 32-bit
For 32-bit, the upper limit is conservative, but the exact limit can be
difficult to calculate.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-20-ardb@kernel.org
The following commit:
223e3ee56f ("efi/x86: add headroom to decompressor BSS to account for setup block")
added headroom to the PE image to account for the setup block, which
wasn't used for the decompression buffer.
Now that the decompression buffer is located at the start of the image,
and includes the setup block, this is no longer required.
Add a check to make sure that the head section of the compressed kernel
won't overwrite itself while relocating. This is only for
future-proofing as with current limits on the setup and the actual size
of the head section, this can never happen.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-19-ardb@kernel.org
Store the kernel's link address as ImageBase in the PE header. Note that
the PE specification requires the ImageBase to be 64k aligned. The
preferred address should almost always satisfy that, except for 32-bit
kernel if the configuration has been customized.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-4-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-18-ardb@kernel.org
In preparation for being able to decompress into a buffer starting at a
different address than startup_32, save the calculated output address
instead of recalculating it later.
We now keep track of three addresses:
%edx: startup_32 as we were loaded by bootloader
%ebx: new location of compressed kernel
%ebp: start of decompression buffer
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-16-ardb@kernel.org
The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).
When loading a 64-bit kernel using the new efi32_pe_entry() point added by:
97aa276579 ("efi/x86: Add true mixed mode entry point into .compat section")
using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.
Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
code32_start is meant for 16-bit real-mode bootloaders to inform the
kernel where the 32-bit protected mode code starts. Nothing in the
protected mode kernel except the EFI stub uses it.
efi_main() currently returns boot_params, with code32_start set inside it
to tell efi_stub_entry() where startup_32 is located. Since it was invoked
by efi_stub_entry() in the first place, boot_params is already known.
Return the address of startup_32 instead.
This will allow a 64-bit kernel to live above 4Gb, for example, and it's
cleaner as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
The following commit:
ef5a7b5eb1 ("efi/x86: Remove GDT setup from efi_main")
introduced GDT setup into the 32-bit kernel's startup_32, and reloads
the GDTR after relocating the kernel for paranoia's sake.
A followup commit:
32d009137a ("x86/boot: Reload GDTR after copying to the end of the buffer")
introduced a similar GDTR reload in the 64-bit kernel as well.
The GDTR is adjusted by (init_size-_end), however this may not be the
correct offset to apply if the kernel was loaded at a misaligned address
or below LOAD_PHYSICAL_ADDR, as in that case the decompression buffer
has an additional offset from the original load address.
This should never happen for a conformant bootloader, but we're being
paranoid anyway, so just store the new GDT address in there instead of
adding any offsets, which is simpler as well.
Fixes: ef5a7b5eb1 ("efi/x86: Remove GDT setup from efi_main")
Fixes: 32d009137a ("x86/boot: Reload GDTR after copying to the end of the buffer")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20200226230031.3011645-2-nivedita@alum.mit.edu
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that .eh_frame sections for the files in setup.elf and realmode.elf
are not generated anymore, the linker scripts don't need the special
output section name /DISCARD/ any more.
Remove the one in the main kernel linker script as well, since there are
no .eh_frame sections already, and fix up a comment referencing .eh_frame.
Update the comment in asm/dwarf2.h referring to .eh_frame so it continues
to make sense, as well as being more specific.
[ bp: Touch up commit message. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200224232129.597160-3-nivedita@alum.mit.edu
While discussing a patch to discard .eh_frame from the compressed
vmlinux using the linker script, Fangrui Song pointed out [1] that these
sections shouldn't exist in the first place because arch/x86/Makefile
uses -fno-asynchronous-unwind-tables.
It turns out this is because the Makefiles used to build the compressed
kernel redefine KBUILD_CFLAGS, dropping this flag.
Add the flag to the Makefile for the compressed kernel, as well as the
EFI stub Makefile to fix this.
Also add the flag to boot/Makefile and realmode/rm/Makefile so that the
kernel's boot code (boot/setup.elf) and realmode trampoline
(realmode/rm/realmode.elf) won't be compiled with .eh_frame sections,
since their linker scripts also just discard them.
[1] https://lore.kernel.org/lkml/20200222185806.ywnqhfqmy67akfsa@google.com/
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200224232129.597160-2-nivedita@alum.mit.edu
