The wording and style of the different error messages was not
consistent. This patch makes the wording and style consistent
throughout the driver.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When isl29028_set_als_scale() fails, it was up to both callers to log
the failure message. This patch moves the logging into
isl29028_set_als_scale() to reduce the overall amount of code in the
driver.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When isl29028_set_proxim_sampling() fails, it was up to both callers to
log the failure message. This patch moves the logging into
isl29028_set_proxim_sampling() to reduce the overall amount of code in
the driver.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The #define ISL29028_DEV_ATTR was not used so this patch removes the
unnecessary code.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add and remove newlines to improve code readability in preparation for
moving the driver out of staging.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The alignment of the variables in the struct isl29028_chip is not
consistent. This changes all of the variables to use consistent
alignment to improve the code readability.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
isl29028_proxim_get() checks to see if the promixity needs to be
enabled on the chip and then calls isl29028_read_proxim(). There
are no other callers of isl29028_read_proxim(). The naming between
these two functions can be confusing so this patch combines the
two to avoid the confusion.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Two separate calls to regmap_update_bits() in isl29028_set_als_scale()
and isl29028_set_als_ir_mode() did not have their function arguments
on the next line aligned correctly to the open parenthesis. This patch
corrects the alignment.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. Fix up the 35ms delays here to use msleep() and
reduce the load on the hrtimer subsystem.
Fixes: commit 4d33615df5 ("iio: light: add MAX30100 oximeter driver support")
Link: http://lkml.org/lkml/2017/1/11/377
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This adds TI's tlc4541 16-bit ADC driver. Which is a single channel
ADC. Supports raw and trigger buffer access.
Also supports the tlc3541 14-bit device, which has not been tested.
Implementation of the tlc3541 is fairly straight forward thou.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace the types with the actual variable names when using the
sizeof() operator. This is kernel preferred style as it's
more obvious that it is correct.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When CONFIG_PM_SLEEP is disabled, we get a harmless warning
drivers/iio/light/cm3605.c:292:12: error: 'cm3605_pm_resume' defined but not used [-Werror=unused-function]
drivers/iio/light/cm3605.c:281:12: error: 'cm3605_pm_suspend' defined but not used [-Werror=unused-function]
Marking the functions as possibly unused avoids the warning without
needing to add an #ifdef.
Fixes: 8afa505c12 ("iio: light: add driver for Capella CM3605")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Driver was checking for direct mode before changing oversampling
ratios, but was not locking it. Use the claim/release helper
functions to guarantee the device stays in direct mode while the
oversampling ratios are being updated. Continue to use the drivers
private state lock to protect against conflicting direct mode access
of the state data.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Driver was checking for direct mode but not locking it. Use the
claim/release helper functions to guarantee the device stays in
direct mode during raw reads of proximity data.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during raw writes.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The addition of Garmin put it in the incorrect place. This fixes that
issue.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9b27c270d4 ("devicetree: add Garmin vendor prefix")
Cc: Rob Herring <robh@kernel.org>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
Fix the following warnings:
Block comments should align the * on each line
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor write_vmem() for sake of readability.
While here, fix indentation in one comment.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is 64x48 display exists. In order to support that set multiplexer
to 48 pixels and window address to proper position in the graphic display
data RAM.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kstrto*() functions return proper error code.
Do propogate it to the user.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to duplicate what SPI core already does, i.e. mapping buffers
for DMA capable transfers.
Remove all related pices of code.
Note, that code, besides its redundancy, was buggy: DMA address potentially can
be 0, SPI slave device has nothing to do with DMA capable device properties and
DMA mask in particular.
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all, fbtft in current state doesn't allow to override GPIOs to be
optional, like "reset" one. It might be a bug somewhere, but rather out of
scope of this fix.
Second, not all GPIOs available on the board would be SoC based, some of them
might sit on I2C GPIO expanders, for example, on Intel Edison/Arduino, and thus
any communication with them might sleep.
Besides that using udelay() and mdelay() is kinda resource wasteful.
Summarize all of the above, convert fbtft_reset() function to non-atomic
variant by using gpio_set_value_cansleep(), usleep_range(), and msleep().
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vfree frees the virtually continuous block of memory beginning at
addr. If addr is NULL, no operation is performed. So, NULL test is not
needed before vfree().
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Open braces for enum, union and struct go on the same line.
Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
