Commit Graph

957 Commits

Author SHA1 Message Date
Max Gurtovoy
1c78f7735b nvme-pci: fix CMB sysfs file removal in reset path
Currently we create the sysfs entry even if we fail mapping
it. In that case, the unmapping will not remove the sysfs created
file. There is no good reason to create a sysfs entry for a non
working CMB and show his characteristics.

Fixes: f63572dff ("nvme: unmap CMB and remove sysfs file in reset path")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-10 11:19:06 +02:00
Martin Wilck
758f373558 nvme: strip trailing 0-bytes in wwid_show
Some broken controllers (such as earlier Linux targets) pad model or
serial fields with 0-bytes rather than spaces. The NVMe spec disallows
0 bytes in "ASCII" fields.  Thus strip trailing 0-bytes, too. Also make
sure that we get no underflow for pathological input.

Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-10 10:43:31 +02:00
Sagi Grimberg
0b36658ca8 nvme-rdma: use intelligent affinity based queue mappings
Use the generic block layer affinity mapping helper. Also,
limit nr_hw_queues to the rdma device number of irq vectors
as we don't really need more.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-08 14:58:03 -04:00
Scott Bauer
7dd1ab163c nvme: validate admin queue before unquiesce
With a misbehaving controller it's possible we'll never
enter the live state and create an admin queue. When we
fail out of reset work it's possible we failed out early
enough without setting up the admin queue. We tear down
queues after a failed reset, but needed to do some more
sanitization.

Fixes 443bd90f2c: "nvme: host: unquiesce queue in nvme_kill_queues()"

[  189.650995] nvme nvme1: pci function 0000:0b:00.0
[  317.680055] nvme nvme0: Device not ready; aborting reset
[  317.680183] nvme nvme0: Removing after probe failure status: -19
[  317.681258] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  317.681397] general protection fault: 0000 [#1] SMP KASAN
[  317.682984] CPU: 3 PID: 477 Comm: kworker/3:2 Not tainted 4.13.0-rc1+ #5
[  317.683112] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016
[  317.683284] Workqueue: events nvme_remove_dead_ctrl_work [nvme]
[  317.683398] task: ffff8803b0990000 task.stack: ffff8803c2ef0000
[  317.683516] RIP: 0010:blk_mq_unquiesce_queue+0x2b/0xa0
[  317.683614] RSP: 0018:ffff8803c2ef7d40 EFLAGS: 00010282
[  317.683716] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1006fbdcde3
[  317.683847] RDX: 0000000000000038 RSI: 1ffff1006f5a9245 RDI: 0000000000000000
[  317.683978] RBP: ffff8803c2ef7d58 R08: 1ffff1007bcdc974 R09: 0000000000000000
[  317.684108] R10: 1ffff1007bcdc975 R11: 0000000000000000 R12: 00000000000001c0
[  317.684239] R13: ffff88037ad49228 R14: ffff88037ad492d0 R15: ffff88037ad492e0
[  317.684371] FS:  0000000000000000(0000) GS:ffff8803de6c0000(0000) knlGS:0000000000000000
[  317.684519] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  317.684627] CR2: 0000002d1860c000 CR3: 000000045b40d000 CR4: 00000000003406e0
[  317.684758] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  317.684888] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  317.685018] Call Trace:
[  317.685084]  nvme_kill_queues+0x4d/0x170 [nvme_core]
[  317.685185]  nvme_remove_dead_ctrl_work+0x3a/0x90 [nvme]
[  317.685289]  process_one_work+0x771/0x1170
[  317.685372]  worker_thread+0xde/0x11e0
[  317.685452]  ? pci_mmcfg_check_reserved+0x110/0x110
[  317.685550]  kthread+0x2d3/0x3d0
[  317.685617]  ? process_one_work+0x1170/0x1170
[  317.685704]  ? kthread_create_on_node+0xc0/0xc0
[  317.685785]  ret_from_fork+0x25/0x30
[  317.685798] Code: 0f 1f 44 00 00 55 48 b8 00 00 00 00 00 fc ff df 48 89 e5 41 54 4c 8d a7 c0 01 00 00 53 48 89 fb 4c 89 e2 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 75 50 48 8b bb c0 01 00 00 e8 33 8a f9 00 0f ba b3
[  317.685872] RIP: blk_mq_unquiesce_queue+0x2b/0xa0 RSP: ffff8803c2ef7d40
[  317.685908] ---[ end trace a3f8704150b1e8b4 ]---

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-26 17:41:41 +02:00
Christoph Hellwig
50cdb7c61b nvme-pci: fix HMB size calculation
It's possible the preferred HMB size may not be a multiple of the
chunk_size. This patch moves len to function scope and uses that in
the for loop increment so the last iteration doesn't cause the total
size to exceed the allocated HMB size.

Based on an earlier patch from Keith Busch.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Fixes: 87ad72a59a ("nvme-pci: implement host memory buffer support")
2017-07-25 18:05:33 +02:00
James Smart
9c5358e15c nvme-fc: revise TRADDR parsing
The FC-NVME spec hasn't locked down on the format string for TRADDR.
Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>"
where the wwn's are hex values but not prefixed by 0x.

Most implementations so far expect a string format of
"nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport
uses the match_u64 parser which requires a leading 0x prefix to set
the base properly. If it's not there, a match will either fail or return
a base 10 value.

The resolution in T11 is pushing out. Therefore, to fix things now and
to cover any eventuality and any implementations already in the field,
this patch adds support for both formats.

The change consists of replacing the token matching routine with a
routine that validates the fixed string format, and then builds
a local copy of the hex name with a 0x prefix before calling
the system parser.

Note: the same parser routine exists in both the initiator and target
transports. Given this is about the only "shared" item, we chose to
replicate rather than create an interdendency on some shared code.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25 18:05:25 +02:00
James Smart
8b25f35192 nvme-fc: address target disconnect race conditions in fcp io submit
There are cases where threads are in the process of submitting new
io when the LLDD calls in to remove the remote port. In some cases,
the next io actually goes to the LLDD, who knows the remoteport isn't
present and rejects it. To properly recovery/restart these i/o's we
don't want to hard fail them, we want to treat them as temporary
resource errors in which a delayed retry will work.

Add a couple more checks on remoteport connectivity and commonize the
busy response handling when it's seen.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25 17:58:47 +02:00
Johannes Thumshirn
6484f5d16f nvme: also provide a UUID in the WWID sysfs attribute
The WWID sysfs attribute can provide multiple means of a World Wide ID
for a NVMe device. It can either be a NGUID, a EUI-64 or a concatenation
of VID, Serial Number, Model and the Namespace ID in this order of
preference.

If the target also sends us a UUID use the UUID for identification and
give it the highest priority.

This eases generation of /dev/disk/by-* symlinks.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25 17:58:22 +02:00
Christophe JAILLET
b00c9b7aa0 nvme-pci: Fix an error handling path in 'nvme_probe()'
Release resources in the correct order in order not to miss a
'put_device()' if 'nvme_dev_map()' fails.

Fixes: b00a726a9f ("NVMe: Don't unmap controller registers on reset")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20 08:41:56 -06:00
Keith Busch
86eea2895d nvme-pci: Remove nvme_setup_prps BUG_ON
This patch replaces the invalid nvme SGL kernel panic with a warning,
and returns an appropriate error. The warning will occur only on the
first occurance, and sgl details will be printed to help debug how the
request was allowed to form.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20 08:41:56 -06:00
David Wayne Fugate
f99cb7af40 nvme-pci: add another device ID with stripe quirk
Adds a fourth Intel controller which has the "stripe" quirk.

Signed-off-by: David Wayne Fugate <david.fugate@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20 08:41:56 -06:00
Christoph Hellwig
dc1a0afbac nvme: fix byte swapping in the streams code
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20 08:41:56 -06:00
Linus Torvalds
130568d5ea Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
 "This is a followup for block changes, that didn't make the initial
  pull request. It's a bit of a mixed bag, this contains:

   - A followup pull request from Sagi for NVMe. Outside of fixups for
     NVMe, it also includes a series for ensuring that we properly
     quiesce hardware queues when browsing live tags.

   - Set of integrity fixes from Dmitry (mostly), fixing various issues
     for folks using DIF/DIX.

   - Fix for a bug introduced in cciss, with the req init changes. From
     Christoph.

   - Fix for a bug in BFQ, from Paolo.

   - Two followup fixes for lightnvm/pblk from Javier.

   - Depth fix from Ming for blk-mq-sched.

   - Also from Ming, performance fix for mtip32xx that was introduced
     with the dynamic initialization of commands"

* 'for-linus' of git://git.kernel.dk/linux-block: (44 commits)
  block: call bio_uninit in bio_endio
  nvmet: avoid unneeded assignment of submit_bio return value
  nvme-pci: add module parameter for io queue depth
  nvme-pci: compile warnings in nvme_alloc_host_mem()
  nvmet_fc: Accept variable pad lengths on Create Association LS
  nvme_fc/nvmet_fc: revise Create Association descriptor length
  lightnvm: pblk: remove unnecessary checks
  lightnvm: pblk: control I/O flow also on tear down
  cciss: initialize struct scsi_req
  null_blk: fix error flow for shared tags during module_init
  block: Fix __blkdev_issue_zeroout loop
  nvme-rdma: unconditionally recycle the request mr
  nvme: split nvme_uninit_ctrl into stop and uninit
  virtio_blk: quiesce/unquiesce live IO when entering PM states
  mtip32xx: quiesce request queues to make sure no submissions are inflight
  nbd: quiesce request queues to make sure no submissions are inflight
  nvme: kick requeue list when requeueing a request instead of when starting the queues
  nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues
  nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues
  nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues
  ...
2017-07-11 15:36:52 -07:00
Jens Axboe
459bd0dc39 Merge branch 'nvme-4.13' of git://git.infradead.org/nvme into for-linus
Pull followup NVMe (mostly) changes from Sagi:

I added the quiesce/unquiesce patches in here as it's
easy for me easily apply changes on top. It has accumulated
reviews and includes mostly nvme anyway, please tell me if
you don't want to take them with this.

This includes:
- quiesce/unquiesce fixes in nvme and others from me
- nvme-fc add create association padding spec updates from James
- some more quirking from MKP
- nvmet nit cleanup from Max
- Fix nvme-rdma racy RDMA completion signalling from Marta
- some centralization patches from me
- add tagset nr_hw_queues updates on controller resets in
  nvme drivers from me
- nvme-rdma fix resources recycling when doing error recovery from me
- minor cleanups in nvme-fc from me
2017-07-10 11:44:34 -06:00
weiping zhang
b27c1e683d nvme-pci: add module parameter for io queue depth
Adjust io queue depth more easily, and make sure io queue depth >= 2.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-10 13:16:46 +03:00
Dan Carpenter
2ee0e4ed5c nvme-pci: compile warnings in nvme_alloc_host_mem()
"i" should be signed or it could cause a forever loop on the cleanup
path. "size" can be used uninitialized.

Fixes: 87ad72a59a ("nvme-pci: implement host memory buffer support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-10 09:09:58 +03:00
Linus Torvalds
f263fbb8d6 pci-v4.13-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZYAFUAAoJEFmIoMA60/r8cFQP/A4fpdjhd42WRNQXGTpZieop
 i40lBQtGdBn/UY97U6BoutcS1ygDi9OiSzg+IR6I90iMgidqyUHFhe4hGWgVHD2g
 Tg0KLzd+lKKfQ6Gqt1P6t4dLGLvyEj5NUbCeFE4XYODAUkkiBaOndax6DK1GvU54
 Vjuj63rHtMKFR/tG/4iFTigObqyI8QE6O9JVxwuvIyEX6RXKbJe+wkulv5taSnWt
 Ne94950i10MrELtNreVdi8UbCbXiqjg0r5sKI/WTJ7Bc7WsC7X5PhWlhcNrbHyBT
 Ivhoypkui3Ky8gvwWqL0KBG+cRp8prBXAdabrD9wRbz0TKnfGI6pQzseCGRnkE6T
 mhlSJpsSNIHaejoCjk93yPn5oRiTNtPMdVhMpEQL9V/crVRGRRmbd7v2TYvpMHVR
 JaPZ8bv+C2aBTY8uL3/v/rgrjsMKOYFeaxeNklpErxrknsbgb6BgubmeZXDvTBVv
 YUIbAkvveonUKisv+kbD8L7tp1+jdbRUT0AikS0NVgAJQhfArOmBcDpTL9YC51vE
 feFhkVx4A32vvOm7Zcg9A7IMXNjeSfccKGw3dJOAvzgDODuJiaCG6S0o7B5Yngze
 axMi87ixGT4QM98z/I4MC8E9rDrJdIitlpvb6ZBgiLzoO3kmvsIZZKt8UxWqf5r8
 w3U2HoyKH13Qbkn1xkum
 =mkyb
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
    Khee)

  - make host bridge IRQ mapping much more generic (Matthew Minter,
    Lorenzo Pieralisi)

  - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
    Pieralisi)

  - mutex sriov_configure() (Jakub Kicinski)

  - mutex pci_error_handlers callbacks (Christoph Hellwig)

  - split ->reset_notify() into ->reset_prepare()/reset_done()
    (Christoph Hellwig)

  - support multiple PCIe portdrv interrupts for MSI as well as MSI-X
    (Gabriele Paoloni)

  - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
    Paoloni)

  - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)

  - test INTx masking during enumeration, not at run-time (Piotr Gregor)

  - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)

  - restore the status of PCI devices across hibernation (Chen Yu)

  - keep parent resources that start at 0x0 (Ard Biesheuvel)

  - enable ECRC only if device supports it (Bjorn Helgaas)

  - restore PRI and PASID state after Function-Level Reset (CQ Tang)

  - skip DPC event if device is not present (Keith Busch)

  - check domain when matching SMBIOS info (Sujith Pandel)

  - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)

  - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)

  - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)

  - add Switchtec "running" status flag (Logan Gunthorpe)

  - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)

  - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
    Gogada)

  - move VMD SRCU cleanup after bus, child device removal (Jon Derrick)

  - add Faraday clock handling (Linus Walleij)

  - configure Rockchip MPS and reorganize (Shawn Lin)

  - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)

  - support Tegra MSI 64-bit addressing (Thierry Reding)

  - use Rockchip normal (not privileged) register bank (Shawn Lin)

  - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)

  - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
    Gonzalez)

  - add MediaTek PCIe host controller support (Ryder Lee)

  - add Qualcomm IPQ4019 support (John Crispin)

  - add HyperV vPCI protocol v1.2 support (Jork Loeser)

  - add i.MX6 regulator support (Quentin Schulz)

* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller
  PCI: rockchip: Use normal register bank for config accessors
  dt-bindings: PCI: Add documentation for MediaTek PCIe
  PCI: Remove __pci_dev_reset() and pci_dev_reset()
  PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
  PCI: vmd: Move SRCU cleanup after bus, child device removal
  PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
  PCI: versatile: Add local struct device pointers
  PCI: tegra: Do not allocate MSI target memory
  PCI: tegra: Support MSI 64-bit addressing
  PCI: rockchip: Use local struct device pointer consistently
  PCI: rockchip: Check for clk_prepare_enable() errors during resume
  MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
  PCI: rockchip: Configure RC's MPS setting
  PCI: rockchip: Reconfigure configuration space header type
  PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
  PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
  ...
2017-07-08 15:51:57 -07:00
Sagi Grimberg
842594c877 nvme-rdma: unconditionally recycle the request mr
When our RDMA queue-pair is torn down with high load
of I/O traffic, we have no way of knowing if the
memory region was actually registered by the reg_mr
work request as it completion flushes with error (hw
might have done it or not).

So in order to not deal with all this uncertanty, we
simply recycle the MR in reinit_request.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-06 09:49:43 +03:00
Sagi Grimberg
d09f2b45f3 nvme: split nvme_uninit_ctrl into stop and uninit
Usually before we teardown the controller we want to:
1. complete/cancel any ctrl inflight works
2. remove ctrl namespaces (only for removal though, resets
   shouldn't remove any namespaces).

but we do not want to destroy the controller device as
we might use it for logging during the teardown stage.

This patch adds nvme_start_ctrl() which queues inflight
controller works (aen, ns scan, queue start and keep-alive
if kato is set) and nvme_stop_ctrl() which cancels the works
namespace removal is left to the callers to handle.

Move nvme_uninit_ctrl after we are done with the
controller device.

Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-06 09:49:42 +03:00
Sagi Grimberg
8d7b8fafad nvme: kick requeue list when requeueing a request instead of when starting the queues
When we requeue a request, we can always insert the request
back to the scheduler instead of doing it when restarting
the queues and kicking the requeue work, so get rid of
the requeue kick in nvme (core and drivers).

Also, now there is no need start hw queues in nvme_kill_queues
We don't stop the hw queues anymore, so no need to
start them.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-06 09:48:59 +03:00
Sagi Grimberg
c81545f991 nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues
unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-06 09:48:47 +03:00
Sagi Grimberg
f9c5af5f8f nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues
unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.

Also, make sure to unquiesce before cleanup the admin queue.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-By: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-06 09:48:31 +03:00
Sagi Grimberg
fb05133972 nvme-rdma: quiesce/unquiesce admin_q instead of start/stop its hw queues
unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.
Also make sure to kick the requeue list when appropriate.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-06 09:47:58 +03:00
Marta Rybczynska
5e599d73c1 nvme-rdma: remove race conditions from IB signalling
This patch improves the way the RDMA IB signalling is done by using atomic
operations for the signalling variable. This avoids race conditions on
sig_count.

The signalling interval changes slightly and is now the largest power of
two not larger than queue depth / 2.

ilog() usage idea by Bart Van Assche.

Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
2017-07-06 09:46:58 +03:00
Sagi Grimberg
e5859d3a0e nvme-fc: use blk_mq_delay_run_hw_queue instead of open-coding it
Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-04 10:44:46 +03:00
Sagi Grimberg
cda5fd1ac5 nvme-fc: update tagset nr_hw_queues after queues reinit
We might have more/less queues once we reconnect/reset. For
example due to cpu going online/offline or controller constraints.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-04 09:44:17 +03:00
Sagi Grimberg
4c8b99f6b1 nvme-rdma: update tagset nr_hw_queues after reconnecting/resetting
We might have more/less queues once we reconnect/reset. For
example due to cpu going online/offline or controller constraints.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-04 09:44:16 +03:00
Sagi Grimberg
7314183d1d nvme-fc: don't override opts->nr_io_queues
Its what the user passed, so its probably a better
idea to keep it intact. Also, limit the number of
I/O queues to max online cpus and the lport maximum
hw queues.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-04 09:43:26 +03:00
Linus Torvalds
03ffbcdd78 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Expand the generic infrastructure handling the irq migration on CPU
     hotplug and convert X86 over to it. (Thomas Gleixner)

     Aside of consolidating code this is a preparatory change for:

   - Finalizing the affinity management for multi-queue devices. The
     main change here is to shut down interrupts which are affine to a
     outgoing CPU and reenabling them when the CPU comes online again.
     That avoids moving interrupts pointlessly around and breaking and
     reestablishing affinities for no value. (Christoph Hellwig)

     Note: This contains also the BLOCK-MQ and NVME changes which depend
     on the rework of the irq core infrastructure. Jens acked them and
     agreed that they should go with the irq changes.

   - Consolidation of irq domain code (Marc Zyngier)

   - State tracking consolidation in the core code (Jeffy Chen)

   - Add debug infrastructure for hierarchical irq domains (Thomas
     Gleixner)

   - Infrastructure enhancement for managing generic interrupt chips via
     devmem (Bartosz Golaszewski)

   - Constification work all over the place (Tobias Klauser)

   - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)

   - The usual set of fixes, updates and enhancements all over the
     place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  irqchip/or1k-pic: Fix interrupt acknowledgement
  irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
  irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
  nvme: Allocate queues for all possible CPUs
  blk-mq: Create hctx for each present CPU
  blk-mq: Include all present CPUs in the default queue mapping
  genirq: Avoid unnecessary low level irq function calls
  genirq: Set irq masked state when initializing irq_desc
  genirq/timings: Add infrastructure for estimating the next interrupt arrival time
  genirq/timings: Add infrastructure to track the interrupt timings
  genirq/debugfs: Remove pointless NULL pointer check
  irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
  irqchip/gic-v3-its: Add ACPI NUMA node mapping
  irqchip/gic-v3-its-platform-msi: Make of_device_ids const
  irqchip/gic-v3-its: Make of_device_ids const
  irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
  irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
  dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
  genirq/irqdomain: Remove auto-recursive hierarchy support
  irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
  ...
2017-07-03 16:50:31 -07:00
Linus Torvalds
c6b1e36c8f Merge branch 'for-4.13/block' of git://git.kernel.dk/linux-block
Pull core block/IO updates from Jens Axboe:
 "This is the main pull request for the block layer for 4.13. Not a huge
  round in terms of features, but there's a lot of churn related to some
  core cleanups.

  Note this depends on the UUID tree pull request, that Christoph
  already sent out.

  This pull request contains:

   - A series from Christoph, unifying the error/stats codes in the
     block layer. We now use blk_status_t everywhere, instead of using
     different schemes for different places.

   - Also from Christoph, some cleanups around request allocation and IO
     scheduler interactions in blk-mq.

   - And yet another series from Christoph, cleaning up how we handle
     and do bounce buffering in the block layer.

   - A blk-mq debugfs series from Bart, further improving on the support
     we have for exporting internal information to aid debugging IO
     hangs or stalls.

   - Also from Bart, a series that cleans up the request initialization
     differences across types of devices.

   - A series from Goldwyn Rodrigues, allowing the block layer to return
     failure if we will block and the user asked for non-blocking.

   - Patch from Hannes for supporting setting loop devices block size to
     that of the underlying device.

   - Two series of patches from Javier, fixing various issues with
     lightnvm, particular around pblk.

   - A series from me, adding support for write hints. This comes with
     NVMe support as well, so applications can help guide data placement
     on flash to improve performance, latencies, and write
     amplification.

   - A series from Ming, improving and hardening blk-mq support for
     stopping/starting and quiescing hardware queues.

   - Two pull requests for NVMe updates. Nothing major on the feature
     side, but lots of cleanups and bug fixes. From the usual crew.

   - A series from Neil Brown, greatly improving the bio rescue set
     support. Most notably, this kills the bio rescue work queues, if we
     don't really need them.

   - Lots of other little bug fixes that are all over the place"

* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
  lightnvm: pblk: set line bitmap check under debug
  lightnvm: pblk: verify that cache read is still valid
  lightnvm: pblk: add initialization check
  lightnvm: pblk: remove target using async. I/Os
  lightnvm: pblk: use vmalloc for GC data buffer
  lightnvm: pblk: use right metadata buffer for recovery
  lightnvm: pblk: schedule if data is not ready
  lightnvm: pblk: remove unused return variable
  lightnvm: pblk: fix double-free on pblk init
  lightnvm: pblk: fix bad le64 assignations
  nvme: Makefile: remove dead build rule
  blk-mq: map all HWQ also in hyperthreaded system
  nvmet-rdma: register ib_client to not deadlock in device removal
  nvme_fc: fix error recovery on link down.
  nvmet_fc: fix crashes on bad opcodes
  nvme_fc: Fix crash when nvme controller connection fails.
  nvme_fc: replace ioabort msleep loop with completion
  nvme_fc: fix double calls to nvme_cleanup_cmd()
  nvme-fabrics: verify that a controller returns the correct NQN
  nvme: simplify nvme_dev_attrs_are_visible
  ...
2017-07-03 10:34:51 -07:00
Linus Torvalds
81e3e04489 UUID/GUID updates:
- introduce the new uuid_t/guid_t types that are going to replace
    the somewhat confusing uuid_be/uuid_le types and make the terminology
    fit the various specs, as well as the userspace libuuid library.
    (me, based on a previous version from Amir)
  - consolidated generic uuid/guid helper functions lifted from XFS
    and libnvdimm (Amir and me)
  - conversions to the new types and helpers (Amir, Andy and me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAllZfmILHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMvyg/9EvWHOOsSdeDykCK3KdH2uIqnxwpl+m7ljccaGJIc
 MmaH0KnsP9p/Cuw5hESh2tYlmCYN7pmYziNXpf/LRS65/HpEYbs4oMqo8UQsN0UM
 2IXHfXY0HnCoG5OixH8RNbFTkxuGphsTY8meaiDr6aAmqChDQI2yGgQLo3WM2/Qe
 R9N1KoBWH/bqY6dHv+urlFwtsREm2fBH+8ovVma3TO73uZCzJGLJBWy3anmZN+08
 uYfdbLSyRN0T8rqemVdzsZ2SrpHYkIsYGUZV43F581vp8e/3OKMoMxpWRRd9fEsa
 MXmoaHcLJoBsyVSFR9lcx3axKrhAgBPZljASbbA0h49JneWXrzghnKBQZG2SnEdA
 ktHQ2sE4Yb5TZSvvWEKMQa3kXhEfIbTwgvbHpcDr5BUZX8WvEw2Zq8e7+Mi4+KJw
 QkvFC1S96tRYO2bxdJX638uSesGUhSidb+hJ/edaOCB/GK+sLhUdDTJgwDpUGmyA
 xVXTF51ramRS2vhlbzN79x9g33igIoNnG4/PV0FPvpCTSqxkHmPc5mK6Vals1lqt
 cW6XfUjSQECq5nmTBtYDTbA/T+8HhBgSQnrrvmferjJzZUFGr/7MXl+Evz2x4CjX
 OBQoAMu241w6Vp3zoXqxzv+muZ/NLar52M/zbi9TUjE0GvvRNkHvgCC4NmpIlWYJ
 Sxg=
 =J/4P
 -----END PGP SIGNATURE-----

Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid

Pull uuid subsystem from Christoph Hellwig:
 "This is the new uuid subsystem, in which Amir, Andy and I have started
  consolidating our uuid/guid helpers and improving the types used for
  them. Note that various other subsystems have pulled in this tree, so
  I'd like it to go in early.

  UUID/GUID summary:

   - introduce the new uuid_t/guid_t types that are going to replace the
     somewhat confusing uuid_be/uuid_le types and make the terminology
     fit the various specs, as well as the userspace libuuid library.
     (me, based on a previous version from Amir)

   - consolidated generic uuid/guid helper functions lifted from XFS and
     libnvdimm (Amir and me)

   - conversions to the new types and helpers (Amir, Andy and me)"

* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
  ACPI: hns_dsaf_acpi_dsm_guid can be static
  mmc: sdhci-pci: make guid intel_dsm_guid static
  uuid: Take const on input of uuid_is_null() and guid_is_null()
  thermal: int340x_thermal: fix compile after the UUID API switch
  thermal: int340x_thermal: Switch to use new generic UUID API
  acpi: always include uuid.h
  ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
  ACPI / extlog: Switch to use new generic UUID API
  ACPI / bus: Switch to use new generic UUID API
  ACPI / APEI: Switch to use new generic UUID API
  acpi, nfit: Switch to use new generic UUID API
  MAINTAINERS: add uuid entry
  tmpfs: generate random sb->s_uuid
  scsi_debug: switch to uuid_t
  nvme: switch to uuid_t
  sysctl: switch to use uuid_t
  partitions/ldm: switch to use uuid_t
  overlayfs: use uuid_t instead of uuid_be
  fs: switch ->s_uuid to uuid_t
  ima/policy: switch to use uuid_t
  ...
2017-07-03 09:55:26 -07:00
Christoph Hellwig
775755ed3c PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
The pci_error_handlers->reset_notify() method had a flag to indicate
whether to prepare for or clean up after a reset.  The prepare and done
cases have no shared functionality whatsoever, so split them into separate
methods.

[bhelgaas: changelog, update locking comments]
Link: http://lkml.kernel.org/r/20170601111039.8913-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-03 07:58:30 -05:00
Sagi Grimberg
01ad099046 nvme-pci: rename to nvme_pci_configure_admin_queue
we are going to need the name for the core routine...

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-02 15:03:23 +03:00
Sagi Grimberg
20d0dfe65a nvme: move ctrl cap to struct nvme_ctrl
All transports use either a private cache of controller cap or an on-stack
copy, move it to the generic struct nvme_ctrl. In the future it will also
be maintained by the core.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-02 15:03:22 +03:00
Sagi Grimberg
d858e5f04e nvme: move queue_count to the nvme_ctrl
All all transports use the queue_count in exactly the same, so move it to
the generic struct nvme_ctrl. In the future it will also be maintained by
the core.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-By: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-02 14:59:04 +03:00
Martin K. Petersen
d554b5e1ca nvme: Quirks for PM1725 controllers
PM1725 controllers have a couple of quirks that need to be handled in
the driver:

 - I/O queue depth must be limited to 64 entries on controllers that do
   not report MQES.

 - The host interface registers go offline briefly while resetting the
   chip. Thus a delay is needed before checking whether the controller
   is ready.

Note that the admin queue depth is also limited to 64 on older versions
of this board. Since our NVME_AQ_DEPTH is now 32 that is no longer an
issue.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-07-02 14:59:03 +03:00
Valentin Rothberg
a2b9377500 nvme: Makefile: remove dead build rule
Remove dead build rule for drivers/nvme/host/scsi.c which has been
removed by commit ("nvme: Remove SCSI translations").

Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-29 09:43:23 -06:00
Christoph Hellwig
425a17cbff nvme: Allocate queues for all possible CPUs
Unlike most drіvers that simply pass the maximum possible vectors to
pci_alloc_irq_vectors NVMe needs to configure the device before allocting
the vectors, so it needs a manual update for the new scheme of using
all present CPUs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-block@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Link: http://lkml.kernel.org/r/20170626102058.10200-4-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-28 23:00:07 +02:00
James Smart
69fa964632 nvme_fc: fix error recovery on link down.
Currently, the fc transport invokes nvme_fc_error_recovery() on every
io in which the transport detects an error.  Which means:
a) it's really noisy on large io loads that all get hit by a link down.
b) we repeatively call nvme_stop_queues() even though queues are
 stopped upon the first error or as first steps of reset_work.

Correct by:
Errors are only meaningful if the controller is in the LIVE state.
Thus, enact the reset_work only if LIVE. If called repeatively, state
will have already transitioned.
There's no need to stop the queues here. Let the first steps of
reset_work do the queue stopping.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
James Smart
0b5a7669a4 nvme_fc: Fix crash when nvme controller connection fails.
If a controller connection is attempted (say to a subsystem that
does not exist), the first attempt errors out.  If another connect
is attempted, it crashes.

Issue is the prior controller has yet execute it's final put, thus
its still on lists. However, opts points on it have been cleared, thus
causing the crash if they are referenced.

Fix is to add the missing put after the nvme_uninit_ctrl() call on
the attachment failure.

Signed-off-by: Paul Ely <Paul.Ely@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
James Smart
36715cf4b3 nvme_fc: replace ioabort msleep loop with completion
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

Wait for io aborts to complete wait converted from msleep look to
using a struct completion.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
James Smart
b4dfd6ee99 nvme_fc: fix double calls to nvme_cleanup_cmd()
Current fc transport code, on io termination, is calling
nvme_cleanup_cmd() followed by the transport dma unmap routine
which also calls nvme_cleanup_cmd(). Which means two kfrees occur
on the same address, raising havoc. This resulted in odd data errors,
effectively corruption..

Fix by removing the extraneous double calls. Call now occurs only in
teardown paths and as part of dma unmap routine.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Christoph Hellwig
b1465c6344 nvme-fabrics: verify that a controller returns the correct NQN
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Christoph Hellwig
49d3d50b0d nvme: simplify nvme_dev_attrs_are_visible
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Christoph Hellwig
180de00700 nvme: read the subsystem NQN from Identify Controller
NVMe 1.2.1 or later requires controllers to provide a subsystem NQN in the
Identify controller data structures.  Use this NQN for the subsysnqn
sysfs attribute by storing it in the nvme_ctrl structure after verifying
it.  For older controllers we generate a "fake" NQN per non-normative
text in the NVMe 1.3 spec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Christoph Hellwig
942fbab4cd nvme: remove a misleading comment on struct nvme_ns
While a NVMe Namespace is somewhat similar to a SCSI Logical Unit (and not
a Logical Unit Number anyway) there are subtile differences.  Remove the
misleading comment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Kai-Heng Feng
76a5af8417 nvme: explicitly disable APST on quirked devices
A user reports APST is enabled, even when the NVMe is quirked or with
option "default_ps_max_latency_us=0".

The current logic will not set APST if the device is quirked. But the
NVMe in question will enable APST automatically.

Separate the logic "apst is supported" and "to enable apst", so we can
use the latter one to explicitly disable APST at initialiaztion.

BugLink: https://bugs.launchpad.net/bugs/1699004
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Sagi Grimberg
7aa1f42752 nvme: use a single NVME_AQ_DEPTH and relax it to 32
No need to differentiate fabrics from pci/loop, also lower
it to 32 as we don't really need 256 inflight admin commands.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Johannes Thumshirn
6bfe04255d nvme: add hostid token to fabric options
Currently we have no way to define a stable host-id but always use the one
which is randomly generated when we add the host or use the default host.

Provide a "hostid=%s" for user-space to pass in a persistent host-id which
overrides the randomly generated one.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Keith Busch
3f7f25a910 nvme: Remove SCSI translations
The SCSI-to-NVMe translations were added to assist storage applications
utilizing SG_IO transitioning to NVMe. It was always recommended,
however, to use native NVMe for device management as too much is lost
in translation and the maintenance burden in keeping this kludgey
layer around has been neglected such that much of the translations are
completely broken.

This patch removes SG_IO handling from NVMe to avoid any confusion
regarding maintenance support for this interface. The config option for
NVMe SCSI emulation has been disabled by default since 4.5. The driver
has supported native nvme user commands since the beginning, and native
tooling is publicly available for use or as reference for anyone writing
their own tools, so there's no excuse for hanging onto a broken crutch.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Sagi Grimberg
442e19b7cc nvme-pci: open-code polling logic in nvme_poll
Given that the code is simple enough it seems better
then passing a tag by reference for each call site, also
we can now get rid of __nvme_process_cq.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Sagi Grimberg
920d13a884 nvme-pci: factor out the cqe reading mechanics from __nvme_process_cq
Also, maintain a consumed counter to rely on for doorbell and
cqe_seen update instead of directly relying on the cq head and phase.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Sagi Grimberg
83a12fb77b nvme-pci: factor out cqe handling into a dedicated routine
Makes the code slightly more readable.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Sagi Grimberg
eb281c8283 nvme-pci: Introduce nvme_ring_cq_doorbell
Nice abstraction of the actual mechanics of how to do it.
Note the change that we call it after we assign nvmeq->cq_head
to avoid passing it.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 08:14:13 -06:00
Keith Busch
ebef736857 nvme/pci: Fix stuck nvme reset
The controller state is set to resetting prior to disabling the
controller, so this patch accounts for that state when deciding if it
needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0'
blocks forever because the queues were never frozen.

Fixes: 82b057caef ("nvme-pci: fix multiple ctrl removal scheduling")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 17:44:05 -06:00
Jens Axboe
f5d1184062 nvme: add support for streams and directives
This adds support for Directives in NVMe, particular for the Streams
directive. Support for Directives is a new feature in NVMe 1.3. It
allows a user to pass in information about where to store the data, so
that it the device can do so most effiently. If an application is
managing and writing data with different life times, mixing differently
retentioned data onto the same locations on flash can cause write
amplification to grow. This, in turn, will reduce performance and life
time of the device.

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 12:05:56 -06:00
Javier González
613fa267c3 lightnvm: propagate right error code to target
If nvme_alloc_request fails, propagate the right error, instead of
assuming ENOMEM.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:24:53 -06:00
Ming Lei
443bd90f2c nvme: host: unquiesce queue in nvme_kill_queues()
When nvme_kill_queues() is run, queues may be in
quiesced state, so we forcibly unquiesce queues to avoid
blocking dispatch, and I/O hang can be avoided in
remove path.

Peviously we use blk_mq_start_stopped_hw_queues() as
counterpart of blk_mq_quiesce_queue(), now we have
introduced blk_mq_unquiesce_queue(), so use it explicitly.

Cc: linux-nvme@lists.infradead.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 20:52:58 -06:00
Ming Lei
f660174e8b blk-mq: use the introduced blk_mq_unquiesce_queue()
blk_mq_unquiesce_queue() is used for unquiescing the
queue explicitly, so replace blk_mq_start_stopped_hw_queues()
with it.

For the scsi part, this patch takes Bart's suggestion to
switch to block quiesce/unquiesce API completely.

Cc: linux-nvme@lists.infradead.org
Cc: linux-scsi@vger.kernel.org
Cc: dm-devel@redhat.com
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 14:20:04 -06:00
Scott Bauer
6b8190d61a nvme: implement NS Optimal IO Boundary from 1.3 Spec
The NVMe 1.3 spec introduces Namespace Optimal IO Boundaries (NOIOB),
which standardizes the stripe mechanism we currently have quirks for.
This patch implements the necessary logic to handle this new feature.

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-16 08:25:54 +02:00
Sagi Grimberg
8fa611213d nvme: don't hard code size of struct t10_pi_tuple
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 15:50:18 +02:00
Christoph Hellwig
39bdc5901f nvme: no need to wait for the reset when keepalive fails
We don't need to wait for the reset from the delayed work item that
is kicked off when we don't get a keepalive.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-06-15 15:48:45 +02:00
Christoph Hellwig
d86c4d8ef3 nvme: move reset workqueue handling to common code
This moves the nvme_reset function from the PCIe driver to common code,
renaming it to nvme_reset_ctrl in the process.  Additionally a new
helper nvme_reset_ctrl_sync is added for the case where we want to
wait for the reset.  To facilitate that the reset_work work structure is
move to the common nvme_ctrl structure and the ->reset_ctrl method is
removed.  For now the drivers initialize the reset_work with their own
callback, but longer term we should move to callouts for specific
parts of the reset process and move even more code to the core.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-06-15 15:48:34 +02:00
Christoph Hellwig
0350815a90 nvme-pci: merge init_request methods
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:35 +02:00
Christoph Hellwig
76f983cb79 nvme-fc: merge init_request methods
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:32 +02:00
Christoph Hellwig
385475ee2d nvme-rdma: merge init_request and exit_request methods
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:31 +02:00
Christoph Hellwig
ebe6d874cd nvme: move protection information check into nvme_setup_rw
It only applies to read/write commands, and this way non-PCIe drivers
get the check as well instead of having to duplicate it when adding
metadata support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:30 +02:00
Christoph Hellwig
b3b1b0b01d nvme: mark shutdown_timeout static
And open code the SHUTDOWN_TIMEOUT macro.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:29 +02:00
Dan Carpenter
bb472baa23 nvme-rdma: fix error code in nvme_rdma_create_ctrl()
We accidentally return ERR_PTR(0) which is NULL.  The caller isn't
explicitly checking for that but I couldn't immediately spot whether
this would lead to a NULL dereference.  Anyway, we can fix add an
error code easily enough.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:28 +02:00
Guan Junxiong
97ddc36e4e nvmf: keep track of nvmet connect error status
To let the host know what happends to the connection establishment,
adjust the behavior of nvmf_log_connect_error to make more connect
specifig error codes human-readble.

Signed-off-by: Guan Junxiong <guanjunxiong@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:27 +02:00
Johannes Thumshirn
f0425db00c nvme: use ctrl->device consistently for logging
Change the few left over users of ctrl->dev over to using ctrl->device
for logging purposes, so we consistently use the same device.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:24 +02:00
Johannes Thumshirn
d934f9848a nvme: provide UUID value to userspace
Now that we have a way for getting the UUID from a target, provide it
to userspace as well.

Unfortunately there is already a sysfs attribute called UUID which is
a misnomer as it holds the NGUID value. So instead of creating yet
another wrong name, create a new 'nguid' sysfs attribute for the
NGUID. For the UUID attribute add a check wheter the namespace has a
UUID assigned to it and return this or return the NGUID to maintain
backwards compatibility. This should give userspace a chance to catch
up.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@rimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:20 +02:00
Johannes Thumshirn
3b22ba2682 nvme: get list of namespace descriptors
If a target identifies itself as NVMe 1.3 compliant, try to get the
list of Namespace Identification Descriptors and populate the UUID,
NGUID and EUI64 fileds in the NVMe namespace structure with these
values.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:18 +02:00
Johannes Thumshirn
90985b84c4 nvme: rename uuid to nguid in nvme_ns
The uuid field in the nvme_ns structure represents the nguid field
from the identify namespace command. And as NVMe 1.3 introduced an
UUID in the NVMe Namespace Identification Descriptor this will
collide.

So rename the uuid to nguid to prevent any further
confusion. Unfortunately we export the nguid to sysfs in the uuid
sysfs attribute, but this can't be changed anymore without possibly
breaking existing userspace.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:17 +02:00
Johannes Thumshirn
0add5e8e58 nvmet: use NVME_IDENTIFY_DATA_SIZE
Use NVME_IDENTIFY_DATA_SIZE define instead of hard coding the magic
4096 value.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
[hch: converted three more users]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:15 +02:00
Sagi Grimberg
d19d4c8eb1 nvme-pci: remove redundant includes
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2017-06-15 14:30:13 +02:00
Keith Busch
b2a0eb1a0a nvme-pci: Remove watchdog timer
The controller status polling was added to preemptively reset a failed
controller. This early detection would allow commands that would normally
timeout a chance for a retry, or find broken links when the platform
didn't support hotplug.

This once-per-second MMIO read, however, created more problems than
it solves. This often races with PCIe Hotplug events that required
complicated syncing between work queues, frequently triggered PCIe
Completion Timeout errors that also lead to fatal machine checks, and
unnecessarily disrupts low power modes by running on idle controllers.

This patch removes the watchdog timer, and instead checks controller
health only on an IO timeout when we have a reason to believe something
is wrong. If the controller is failed, the driver will disable immediately
and request scheduling a reset.

Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:30:08 +02:00
Xu Yu
97f6ef6464 nvme-pci: remap BAR0 to cover admin CQ doorbell for large stride
The existing driver initially maps 8192 bytes of BAR0 which is
intended to cover doorbells of admin SQ and CQ. However, if a
large stride, e.g. 10, is used, the doorbell of admin CQ will
be out of 8192 bytes. Consequently, a page fault will be raised
when the admin CQ doorbell is accessed in nvme_configure_admin_queue().

This patch fixes this issue by remapping BAR0 before accessing
admin CQ doorbell if the initial mapping is not enough.

Signed-off-by: Xu Yu <yu.a.xu@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:29:51 +02:00
Sagi Grimberg
fdf9dfa850 nvme: move nr_reconnects to nvme_ctrl
It is not a user option but rather a variable controller
attribute.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:29:49 +02:00
Sagi Grimberg
c669ccdc50 nvme: queue ns scanning and async request from nvme_wq
To suppress the warning triggered by nvme_uninit_ctrl:
kernel: [   50.350439] nvme nvme0: rescanning
kernel: [   50.363351] ------------[ cut here]------------
kernel: [   50.363396] WARNING: CPU: 1 PID: 37 at kernel/workqueue.c:2423 check_flush_dependency+0x11f/0x130
kernel: [   50.363409] workqueue: WQ_MEM_RECLAIM
nvme-wq:nvme_del_ctrl_work [nvme_core] is flushing !WQ_MEM_RECLAIM events:nvme_scan_work [nvme_core]

This was triggered with nvme-loop, but can happen with rdma/pci as well afaict.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:29:48 +02:00
Sagi Grimberg
9a6327d2f2 nvme: Move transports to use nvme-core workqueue
Instead of each transport using it's own workqueue, export
a single nvme-core workqueue and use that instead.

In the future, this will help us moving towards some unification
if controller setup/teardown flows.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:29:43 +02:00
Sagi Grimberg
c58bd1bf4d nvme: Don't allow to reset a reconnecting controller
The reset operation is guaranteed to fail for all scenarios
but the esoteric case where in the last reconnect attempt
concurrent with the reset we happen to successfully reconnect.

We just deny initiating a reset if we are reconnecting.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:22 +02:00
Sagi Grimberg
b282a88d91 nvme-rdma: Get rid of CONNECTED state
We only care about if the queue is LIVE for request submission,
so no need for CONNECTED.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:21 +02:00
Sagi Grimberg
abf87d5e9d nvme-rdma: rework rdma connection establishment error path
Instead of introducing a flag for if the queue is allocated,
simply free the rdma resources when we get the error.

We allocate the queue rdma resources when we have an address
resolution, their we allocate (or take a reference on) our device
so we should free it when we have error after the address resolution
namely:
1. route resolution error
2. connect reject
3. connect error
4. peer unreachable error

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:20 +02:00
Sagi Grimberg
ca6e95bb0a nvme-rdma: make nvme_rdma_[create|destroy]_queue_ib symmetrical
We put the reference on the device in the destroy routine
so we should lookup and take the reference in the create
routine.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:19 +02:00
Sagi Grimberg
c8295d1112 nvme-rdma: Don't rearm the CQ when polling directly
We don't need it as the core polling context will take
are of rearming the completion queue.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:18 +02:00
Sagi Grimberg
dc5bc6a9fe nvme-rdma: Make queue flags bit numbers and not shifts
bitops accept bit numbers.

Reported-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:17 +02:00
Sagi Grimberg
3dee63c7d9 nvme-rdma: get rid of unused ctrl lock
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15 14:28:16 +02:00
Christoph Hellwig
87ad72a59a nvme-pci: implement host memory buffer support
If a controller supports the host memory buffer we try to provide
it with the requested size up to an upper cap set as a module
parameter.  We try to give as few as possible descriptors, eventually
working our way down.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-06-15 14:28:13 +02:00
Christoph Hellwig
fe6d53c9c0 nvme: save hmpre and hmmin in struct nvme_ctrl
We'll need the later for the HMB support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-06-13 11:45:35 +02:00
Christoph Hellwig
fdd050b5b3 Merge branch 'uuid-types' of bombadil.infradead.org:public_git/uuid into nvme-base 2017-06-13 11:45:14 +02:00
Christoph Hellwig
a104c9f22c nvme-rdma: fix merge error
The merge of 4.12-rc5 into the for-4.13/block tree didn't handle the queue
ready case correctly.  Fix this by propagating blk_status_t into
nvme_rdma_queue_is_ready.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-12 10:43:12 -06:00
Jens Axboe
8f66439eec Linux 4.12-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
 biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
 kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
 4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
 2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
 W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
 =m2Gx
 -----END PGP SIGNATURE-----

Merge tag 'v4.12-rc5' into for-4.13/block

We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.

Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-12 08:30:13 -06:00
Christoph Hellwig
fc17b6534e blk-mq: switch ->queue_rq return value to blk_status_t
Use the same values for use for request completion errors as the return
value from ->queue_rq.  BLK_STS_RESOURCE is special cased to cause
a requeue, and all the others are completed as-is.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Christoph Hellwig
2a842acab1 block: introduce new block status code type
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings.  This patch
instead introduces a new  blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning.  Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.

For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.

blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Christoph Hellwig
401741547f nvme-lightnvm: use blk_execute_rq in nvme_nvm_submit_user_cmd
Instead of reinventing it poorly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Kai-Heng Feng
9947d6a09c nvme: relax APST default max latency to 100ms
Christoph Hellwig suggests we should to make APST work out of the box.
Hence relax the the default max latency to make them able to enter
deepest power state on default.

Here are id-ctrl excerpts from two high latency NVMes:

vid     : 0x14a4
ssvid   : 0x1b4b
mn      : CX2-GB1024-Q11 NVMe LITEON 1024GB
ps    3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

vid     : 0x15b7
ssvid   : 0x1b4b
mn      : A400 NVMe SanDisk 512GB
ps    3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07 11:08:55 +02:00
Kai-Heng Feng
da87591bea nvme: only consider exit latency when choosing useful non-op power states
When a NVMe is in non-op states, the latency is exlat.
The latency will be enlat + exlat only when the NVMe tries to transit
from operational state right atfer it begins to transit to
non-operational state, which should be a rare case.

Therefore, as Andy Lutomirski suggests, use exlat only when deciding power
states to trainsit to.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07 11:08:54 +02:00
James Smart
24b7f0592f nvme-fc: fix missing put reference on controller create failure
The failure case, of a create controller request, called
nvme_uninit_ctrl() but didn't do a put to allow the nvme
controller to be deleted.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07 11:08:53 +02:00
James Smart
f874d5d079 nvme-fc: on lldd/transport io error, terminate association
Per FC-NVME, when lldd or transport detects an i/o error, the
connection must be terminated, which in turn requires the association
to be termianted.  Currently the transport simply creates a nvme
completion status of transport error and returns the io. The FC-NVME
spec makes the mandate as initiator and host, depending on the error,
can get out of sync on outstanding io counts (sqhd/sqtail).

Implement the association teardown on lldd or transport detected
errors.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-06-07 11:08:52 +02:00
Sagi Grimberg
e818a5b487 nvme-rdma: fast fail incoming requests while we reconnect
When we encounter an transport/controller errors, error recovery
kicks in which performs:
1. stops io/admin queues
2. moves transport queues out of LIVE state
3. fast fail pending io
4. schedule periodic reconnects.

But we also need to fast fail incoming IO taht enters after we
already scheduled. Given that our queue is not LIVE anymore, simply
restart the request queues to fail in .queue_rq

Reported-by: Alex Turin <alex@vastdata.com>
Reported-by: shahar.salzman <shahar.salzman@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
2017-06-07 11:08:51 +02:00
Rakesh Pandit
82b057caef nvme-pci: fix multiple ctrl removal scheduling
Commit c5f6ce97c1 tries to address multiple resets but fails as
work_busy doesn't involve any synchronization and can fail.  This is
reproducible easily as can be seen by WARNING below which is triggered
with line:

WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)

Allowing multiple resets can result in multiple controller removal as
well if different conditions inside nvme_reset_work fail and which
might deadlock on device_release_driver.

[  480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0
[  480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast...
[  480.327044]  btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart..
[  480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13
[  480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[  480.327066] Workqueue: nvme nvme_reset_work
[  480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000
[  480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0
[  480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246
[  480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200
[  480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128
[  480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000
[  480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000
[  480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128
[  480.327072] FS:  0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000
[  480.327073] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0
[  480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  480.327075] Call Trace:
[  480.327079]  ? __switch_to+0x227/0x400
[  480.327081]  process_one_work+0x18c/0x3a0
[  480.327082]  worker_thread+0x4e/0x3b0
[  480.327084]  kthread+0x109/0x140
[  480.327085]  ? process_one_work+0x3a0/0x3a0
[  480.327087]  ? kthread_park+0x60/0x60
[  480.327102]  ret_from_fork+0x2c/0x40
[  480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f.....

This patch addresses the problem by using state of controller to
decide whether reset should be queued or not as state change is
synchronizated using controller spinlock.  Also cancel_work_sync is
used to make sure remove cancels the reset_work and waits for it to
finish.  This patch also changes return value from -ENODEV to more
appropriate -EBUSY if nvme_reset fails to change state.

Fixes: c5f6ce97c1 ("nvme: don't schedule multiple resets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07 11:08:50 +02:00
Ming Lei
82654b6b8e nvme: fix hang in remove path
We need to start admin queues too in nvme_kill_queues()
for avoiding hang in remove path[1].

This patch is very similar with 806f026f9b901eaf(nvme: use
blk_mq_start_hw_queues() in nvme_kill_queues()).

[1] hang stack trace
[<ffffffff813c9716>] blk_execute_rq+0x56/0x80
[<ffffffff815cb6e9>] __nvme_submit_sync_cmd+0x89/0xf0
[<ffffffff815ce7be>] nvme_set_features+0x5e/0x90
[<ffffffff815ce9f6>] nvme_configure_apst+0x166/0x200
[<ffffffff815cef45>] nvme_set_latency_tolerance+0x35/0x50
[<ffffffff8157bd11>] apply_constraint+0xb1/0xc0
[<ffffffff8157cbb4>] dev_pm_qos_constraints_destroy+0xf4/0x1f0
[<ffffffff8157b44a>] dpm_sysfs_remove+0x2a/0x60
[<ffffffff8156d951>] device_del+0x101/0x320
[<ffffffff8156db8a>] device_unregister+0x1a/0x60
[<ffffffff8156dc4c>] device_destroy+0x3c/0x50
[<ffffffff815cd295>] nvme_uninit_ctrl+0x45/0xa0
[<ffffffff815d4858>] nvme_remove+0x78/0x110
[<ffffffff81452b69>] pci_device_remove+0x39/0xb0
[<ffffffff81572935>] device_release_driver_internal+0x155/0x210
[<ffffffff81572a02>] device_release_driver+0x12/0x20
[<ffffffff815d36fb>] nvme_remove_dead_ctrl_work+0x6b/0x70
[<ffffffff810bf3bc>] process_one_work+0x18c/0x3a0
[<ffffffff810bf61e>] worker_thread+0x4e/0x3b0
[<ffffffff810c5ac9>] kthread+0x109/0x140
[<ffffffff8185800c>] ret_from_fork+0x2c/0x40
[<ffffffffffffffff>] 0xffffffffffffffff

Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions")
Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Tested-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07 11:08:49 +02:00
Christoph Hellwig
8e41226324 nvme: switch to uuid_t
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-06-05 16:59:16 +02:00
Andy Lutomirski
50af47d04c nvme: Quirk APST on Intel 600P/P3100 devices
They have known firmware bugs.  A fix is apparently in the works --
once fixed firmware is available, someone from Intel (Hi, Keith!)
can adjust the quirk accordingly.

Cc: stable@vger.kernel.org # v4.11
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-26 11:53:02 +03:00
Christoph Hellwig
c81bfba998 nvme: only setup block integrity if supported by the driver
Currently only the PCIe driver supports metadata, so we should not claim
integrity support for the other drivers.  This prevents nasty crashes
with targets that advertise metadata support on fabrics.

Also use the opportunity to factor out some code into a separate helper
that isn't even compiled if CONFIG_BLK_DEV_INTEGRITY is disabled.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-05-26 09:54:23 +03:00
Christoph Hellwig
d3d5b87ddd nvme: replace is_flags field in nvme_ctrl_ops with a flags field
So that we can have more flags for transport-specific behavior.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-05-26 09:54:16 +03:00
Christoph Hellwig
9bdcfb10f2 nvme-pci: consistencly use ctrl->device for logging
This is what most of the code already does and gives much more useful
prefixes than the device embedded in the pci_dev.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-05-26 09:54:07 +03:00
James Smart
2cb657bc02 nvme_fc: remove extra controller reference taken on reconnect
fix extra controller reference taken on reconnect by moving
reference to initial controller create

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:55:29 +02:00
James Smart
e392e1f1f4 nvme_fc: correct nvme status set on abort
correct nvme status set on abort. Patch that changed status to being actual
nvme status crossed in the night with the patch that added abort values.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:55:29 +02:00
James Smart
589ff7753b nvme_fc: set logging level on resets/deletes
Per the review by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

Looked at existing warn vs info vs err dev_xxx levels for the messages
printed on reconnects and deletes:
- Resets due to error and resets transitioned to deletes are dev_warn
- Other reset/disconnect messages are dev_info
- Removed chatty io queue related messages

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:55:29 +02:00
James Smart
a5321aa5ef nvme_fc: revise comment on teardown
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

An extra reference was pointed out.  There's no issue with the
references, but rather a literal interpretation of what the comment
is saying.

Reword the comment to avoid confusion.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:55:29 +02:00
James Smart
5bbecdbc8e nvme_fc: Support ctrl_loss_tmo
Sync with Sagi's recent addition of ctrl_loss_tmo in the core fabrics
layer.

Remove local connect limits and connect_attempts variable.
Use fabrics new nr_connects variable and use of nvmf_should_reconnect()
Refactor duplicate reconnect failure code.

Addresses review comment by Sagi on controller reset support:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:55:29 +02:00
James Smart
0ce872bf8b nvme_fc: get rid of local reconnect_delay
Remove the local copy of reconnect_delay.
Use the value in the controller options directly.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:55:29 +02:00
Ming Lei
986f75c876 nvme: avoid to use blk_mq_abort_requeue_list()
NVMe may add request into requeue list simply and not kick off the
requeue if hw queues are stopped. Then blk_mq_abort_requeue_list()
is called in both nvme_kill_queues() and nvme_ns_remove() for
dealing with this issue.

Unfortunately blk_mq_abort_requeue_list() is absolutely a
race maker, for example, one request may be requeued during
the aborting. So this patch just calls blk_mq_kick_requeue_list() in
nvme_kill_queues() to handle this issue like what nvme_start_queues()
does. Now all requests in requeue list when queues are stopped will be
handled by blk_mq_kick_requeue_list() when queues are restarted, either
in nvme_start_queues() or in nvme_kill_queues().

Cc: stable@vger.kernel.org
Reported-by: Zhang Yi <yizhan@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:50:10 +02:00
Ming Lei
806f026f9b nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()
Inside nvme_kill_queues(), we have to start hw queues for
draining requests in sw queues, .dispatch list and requeue list,
so use blk_mq_start_hw_queues() instead of blk_mq_start_stopped_hw_queues()
which only run queues if queues are stopped, but the queues may have
been started already, for example nvme_start_queues() is called in reset work
function.

blk_mq_start_hw_queues() run hw queues in current context, instead
of running asynchronously like before. Given nvme_kill_queues() is
run from either remove context or reset worker context, both are fine
to run hw queue directly. And the mutex of namespaces_mutex isn't a
problem too becasue nvme_start_freeze() runs hw queue in this way
already.

Cc: stable@vger.kernel.org
Reported-by: Zhang Yi <yizhan@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:50:09 +02:00
Marta Rybczynska
0544f5494a nvme-rdma: support devices with queue size < 32
In the case of small NVMe-oF queue size (<32) we may enter a deadlock
caused by the fact that the IB completions aren't sent waiting for 32
and the send queue will fill up.

The error is seen as (using mlx5):
[ 2048.693355] mlx5_0:mlx5_ib_post_send:3765:(pid 7273):
[ 2048.693360] nvme nvme1: nvme_rdma_post_send failed with error code -12

This patch changes the way the signaling is done so that it depends on
the queue depth now. The magic define has been removed completely.

Cc: stable@vger.kernel.org
Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Signed-off-by: Samuel Jones <sjones@kalray.eu>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22 20:49:49 +02:00
Linus Torvalds
894e21642d Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A small collection of fixes that should go into this cycle.

   - a pull request from Christoph for NVMe, which ended up being
     manually applied to avoid pulling in newer bits in master. Mostly
     fibre channel fixes from James, but also a few fixes from Jon and
     Vijay

   - a pull request from Konrad, with just a single fix for xen-blkback
     from Gustavo.

   - a fuseblk bdi fix from Jan, fixing a regression in this series with
     the dynamic backing devices.

   - a blktrace fix from Shaohua, replacing sscanf() with kstrtoull().

   - a request leak fix for drbd from Lars, fixing a regression in the
     last series with the kref changes. This will go to stable as well"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvmet: release the sq ref on rdma read errors
  nvmet-fc: remove target cpu scheduling flag
  nvme-fc: stop queues on error detection
  nvme-fc: require target or discovery role for fc-nvme targets
  nvme-fc: correct port role bits
  nvme: unmap CMB and remove sysfs file in reset path
  blktrace: fix integer parse
  fuseblk: Fix warning in super_setup_bdi_name()
  block: xen-blkback: add null check to avoid null pointer dereference
  drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
2017-05-20 16:12:30 -07:00
James Smart
2952a879ba nvme-fc: stop queues on error detection
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

Rather than waiting for reset work thread to stop queues and abort the ios,
immediately stop the queues on error detection. Reset thread will restop
the queues (as it's called on other paths), but it does not appear to have
a side effect.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20 10:11:34 -06:00
James Smart
85e6a6adf8 nvme-fc: require target or discovery role for fc-nvme targets
In order to create an association, the remoteport must be
serving either a target role or a discovery role.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20 10:11:34 -06:00
Jon Derrick
f63572dff1 nvme: unmap CMB and remove sysfs file in reset path
CMB doesn't get unmapped until removal while getting remapped on every
reset. Add the unmapping and sysfs file removal to the reset path in
nvme_pci_disable to match the mapping path in nvme_pci_enable.

Fixes: 202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate")

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-By: Stephen Bates <sbates@raithlin.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20 10:11:34 -06:00
Linus Torvalds
55a1ab56c7 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A smaller collection of fixes that should go into -rc1. This contains:

   - A fix from Christoph, fixing a regression with the WRITE_SAME and
     partial completions. Caused a BUG() on ppc.

   - Fixup for __blk_mq_stop_hw_queues(), it should be static. From
     Colin.

   - Removal of dmesg error messages on elevator switching, when invoked
     from sysfs. From me.

   - Fix for blk-stat, using this_cpu_ptr() in a section only protected
     by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From
     me.

   - Two fixes for BFQ from Paolo, one fixing a crash and one updating
     the documentation.

   - An error handling lightnvm memory leak, from Rakesh.

   - The previous blk-mq hot unplug lock reversal depends on the CPU
     hotplug rework that isn't in mainline yet. This caused a lockdep
     splat when people unplugged CPUs with blk-mq devices. From Wanpeng.

   - A regression fix for DIF/DIX on blk-mq. From Wen"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: handle partial completions for special payload requests
  blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
  blk-stat: don't use this_cpu_ptr() in a preemptable section
  elevator: remove redundant warnings on IO scheduler switch
  block, bfq: stress that low_latency must be off to get max throughput
  block, bfq: use pointer entity->sched_data only if set
  nvme: lightnvm: fix memory leak
  blk-mq: make __blk_mq_stop_hw_queues static
  lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning
  block/mq: fix potential deadlock during cpu hotplug
2017-05-11 11:01:56 -07:00
Rakesh Pandit
fba704b494 nvme: lightnvm: fix memory leak
Free up kmalloc allocated memory if failure happens while handling L2P
table transfer in nvme_nvm_get_l2p_tbl.

Fixes: 8e79b5cb ("lightnvm: move block provisioning to targets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 07:39:43 -06:00
Linus Torvalds
857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Geert Uytterhoeven
629b1b2e0e lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning
With gcc 4.1.2:

    drivers/nvme/host/lightnvm.c: In function ‘nvme_nvm_submit_io’:
    drivers/nvme/host/lightnvm.c:498: warning: ‘rq’ is used uninitialized in this function

Indeed, since commit 2e13f33a24 ("lightnvm: create cmd before
allocating request"), the request is passed to nvme_nvm_rqtocmd() before
it is allocated.

Fortunately, as of commit 91276162de ("lightnvm: refactor end_io
functions for sync"), nvme_nvm_rqtocmd () no longer uses the passed
request, so this warning is a false positive.

Drop the unused parameter to clean up the code and kill the warning.

Fixes: 2e13f33a24 ("lightnvm: create cmd before allocating request")
Fixes: 91276162de ("lightnvm: refactor end_io functions for sync")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-07 19:52:45 -06:00
Javier González
2e13f33a24 lightnvm: create cmd before allocating request
Create nvme command before allocating a request using
nvme_alloc_request, which uses the command direction. Up until now, the
command has been zeroized, so all commands have been allocated as a
read operation.

Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 07:53:04 -06:00
Christoph Hellwig
d6296d39e9 blk-mq: update ->init_request and ->exit_request prototypes
Remove the request_idx parameter, which can't be used safely now that we
support I/O schedulers with blk-mq.  Except for a superflous check in
mtip32xx it was unused anyway.

Also pass the tag_set instead of just the driver data - this allows drivers
to avoid some code duplication in a follow on cleanup.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02 07:52:08 -06:00
Jens Axboe
b06e13c38d Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-4.12/post-merge
Christoph writes:

"A couple more updates for 4.12.  The biggest pile is fc and lpfc
 updates from James, but there are various small fixes and cleanups as
 well."

Fixes up a few merge issues, and also a warning in
lpfc_nvmet_rcv_unsol_abort() if CONFIG_NVME_TARGET_FC isn't enabled.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27 11:33:01 -06:00
Christoph Hellwig
7569b90a22 nvme-scsi: remove nvme_trans_security_protocol
This function just returns the same error code and sense data as
the default statement in the switch in the caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-04-27 08:39:32 +02:00
Christoph Hellwig
25d9baa475 nvme-lightnvm: add missing endianess conversion in nvme_nvm_end_io
Found by sparse.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
2017-04-25 20:01:15 +02:00
Jon Derrick
7fad1fd46c nvme-scsi: Consider LBA format in IO splitting calculation
The current command submission code uses a sector-based value when
considering the maximum number of blocks per command. With a
4k-formatted namespace and a command exceeding max hardware limits, this
calculation doesn't split IOs which should be split and fails in the
nvme layer. This patch fixes that calculation and enables IO splitting
in these circumstances.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-25 20:01:00 +02:00
Ewan D. Milne
de41447aac nvme-fc: avoid memory corruption caused by calling nvmf_free_options() twice
Do not call nvmf_free_options() from the nvme_fc_ctlr destructor if
nvme_fc_create_ctrl() returns an error, because nvmf_create_ctrl()
frees the options when an error is returned.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-25 20:00:59 +02:00
Andy Lutomirski
c35e30b472 nvme: Add nvme_core.force_apst to ignore the NO_APST quirk
We're probably going to be stuck quirking APST off on an over-broad
range of devices for 4.11.  Let's make it easy to override the quirk
for testing.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24 22:03:46 -06:00
Andy Lutomirski
fb0dc3993b nvme: Display raw APST configuration via DYNAMIC_DEBUG
Debugging APST is currently a bit of a pain.  This gives optional
simple log messages that describe the APST state.

The easiest way to use this is probably with the nvme_core.dyndbg=+p
module parameter.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24 22:03:46 -06:00
Andy Lutomirski
76e4ad09a3 nvme: Fix APST comment
There was a typo in the description of the timeout heuristic.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24 22:03:46 -06:00
Jens Axboe
d9fd363a6c Merge branch 'master' into for-4.12/post-merge 2017-04-24 22:03:14 -06:00
Christoph Hellwig
baee29ac17 nvme-fc: mark two symbols static
Found by sparse.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24 09:18:22 +02:00
James Smart
61bff8ef00 nvme_fc: add controller reset support
This patch actually does quite a few things.  When looking to add
controller reset support, the organization modeled after rdma was
very fragmented. rdma duplicates the reset and teardown paths and does
different things to the block layer on the two paths. The code to build
up the controller is also duplicated between the initial creation and
the reset/error recovery paths. So I decided to make this sane.

I reorganized the controller creation and teardown so that there is a
connect path and a disconnect path.  Initial creation obviously uses
the connect path.  Controller teardown will use the disconnect path,
followed last access code. Controller reset will use the disconnect
path to stop operation, and then the connect path to re-establish
the controller.

Along the way, several things were fixed
- aens were not properly set up. They are allocated differently from
  the per-request structure on the blk queues.
- aens were oddly torn down. the prior patch corrected to abort, but
  we still need to dma unmap and free relative elements.
- missed a few ref counting points: in aen completion and on i/o's
  that fail
- controller initial create failure paths were still confused vs teardown
  before converting to ref counting vs after we convert to refcounting.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-24 09:16:29 +02:00
James Smart
78a7ac260e nvme_fc: add aen abort to teardown
Add abort support for aens. Commonized the op abort to apply to aen or
real ios (caused some reorg/routine movement). Abort path sets termination
flag in prep for next patch that will be watching i/o abort completion
before proceeding with controller teardown.

Now that we're aborting aens, the "exit" code that simply cleared out
their context no longer applies.

Also clarified how we detect an AEN vs a normal io - by a flag, not
by whether a rq exists or the a rqno is out of range.

Note: saw some interesting cases where if the queues are stopped and
we're waiting for the aborts, the core layer can call the complete_rq
callback for the io. So the io completion synchronizes link side completion
with possible blk layer completion under error.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-24 09:16:03 +02:00
James Smart
458f280d71 nvme_fc: fix command id check
The code validates the command_id in the response to the original
sqe command. But prior code was using the rq->rqno as the sqe command
id. The core layer overwrites what the transport set there originally.

Use the actual sqe content.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-24 09:15:04 +02:00
Junxiong Guan
e02ab02304 nvme: let dm-mpath distinguish nvme error codes
Currently most IOs which return the nvme error codes are retried on
the other path if those IOs returns EIO from NVMe driver. This
patch let Multipath distinguish nvme media error codes and some
generic or cmd-specific nvme error codes so that multipath will
not retry those kinds of IO, to save bandwidth.

Signed-off-by: Junxiong Guan <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-21 16:41:56 +02:00
Keith Busch
7776db1ccc nvme/pci: Poll CQ on timeout
If an IO timeout occurs, it's helpful to know if the controller did not
post a completion or the driver missed an interrupt. While we never expect
the latter, this patch will make it possible to tell the difference so
we don't have to guess.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-21 16:41:55 +02:00
James Smart
8d64daf7dc nvme_fc: Add ls aborts on remote port teardown
remoteport teardown never aborted the LS opertions. Add support.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-21 16:41:53 +02:00
James Smart
c913a8b0d4 nvme_fc: Move LS's to rport
Link LS's on the remoteport rather than the controller. LS's are
between nport's. Makes more sense, especially on async teardown where
the controller is torn down regardless of the LS (LS is more of a notifier
to the target of the teardown), to have them on the remoteport.

While revising ls send/done routines, issues were seen relative to
refcounting and cleanup, especially in async path. Reworked these code
paths.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-21 16:41:52 +02:00
Helen Koike
f9f38e3338 nvme: improve performance for virtual NVMe devices
This change provides a mechanism to reduce the number of MMIO doorbell
writes for the NVMe driver. When running in a virtualized environment
like QEMU, the cost of an MMIO is quite hefy here. The main idea for
the patch is provide the device two memory location locations:
 1) to store the doorbell values so they can be lookup without the doorbell
    MMIO write
 2) to store an event index.
I believe the doorbell value is obvious, the event index not so much.
Similar to the virtio specification, the virtual device can tell the
driver (guest OS) not to write MMIO unless you are writing past this
value.

FYI: doorbell values are written by the nvme driver (guest OS) and the
event index is written by the virtual device (host OS).

The patch implements a new admin command that will communicate where
these two memory locations reside. If the command fails, the nvme
driver will work as before without any optimizations.

Contributions:
  Eric Northup <digitaleric@google.com>
  Frank Swiderski <fes@google.com>
  Ted Tso <tytso@mit.edu>
  Keith Busch <keith.busch@intel.com>

Just to give an idea on the performance boost with the vendor
extension: Running fio [1], a stock NVMe driver I get about 200K read
IOPs with my vendor patch I get about 1000K read IOPs. This was
running with a null device i.e. the backing device simply returned
success on every read IO request.

[1] Running on a 4 core machine:
  fio --time_based --name=benchmark --runtime=30
  --filename=/dev/nvme0n1 --nrfiles=1 --ioengine=libaio --iodepth=32
  --direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=4
  --rw=randread --blocksize=4k --randrepeat=false

Signed-off-by: Rob Nelson <rlnelson@google.com>
[mlin: port for upstream]
Signed-off-by: Ming Lin <mlin@kernel.org>
[koike: updated for upstream]
Signed-off-by: Helen Koike <helen.koike@collabora.co.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
2017-04-21 16:41:47 +02:00
Keith Busch
81c1cd9835 nvme/pci: Don't set reserved SQ create flags
The QPRIO field is only valid if weighted round robin arbitration is used,
and this driver doesn't enable that controller configuration option.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-21 16:41:46 +02:00
Andy Lutomirski
be56945c4e nvme: Quirk APST off on "THNSF5256GPUK TOSHIBA"
There's a report that it malfunctions with APST on.

See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184

Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 14:42:10 -06:00
Andy Lutomirski
ff5350a86b nvme: Adjust the Samsung APST quirk
I got a couple more reports: the Samsung APST issues appears to
affect multiple 950-series devices in Dell XPS 15 9550 and Precision
5510 laptops.  Change the quirk: rather than blacklisting the
firmware on the first problematic SSD that was reported, disable
APST on all 144d:a802 devices if they're installed in the two
affected Dell models.  While we're at it, disable only the deepest
sleep state instead of all of them -- the reporters say that this is
sufficient to fix the problem.

(I have a device that appears to be entirely identical to one of the
affected devices, but I have a different Dell laptop, so it's not
the case that all Samsung devices with firmware BXW75D0Q are broken
under all circumstances.)

Samsung engineers have an affected system, and hopefully they'll
give us a better workaround some time soon.  In the mean time, this
should minimize regressions.

See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184

Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 14:42:09 -06:00
Christoph Hellwig
08e0029aa2 blk-mq: remove the error argument to blk_mq_complete_request
Now that all drivers that call blk_mq_complete_requests have a
->complete callback we can remove the direct call to blk_mq_end_request,
as well as the error argument to blk_mq_complete_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:16:10 -06:00
Christoph Hellwig
65ba6b54e7 nvme: make nvme_error_status private
Currently it's used by the lighnvm passthrough ioctl, but we'd like to make
it private in preparation of block layer specific error code.  Lighnvm already
returns the real NVMe status anyway, so I think we can just limit it to
returning -EIO for any status set.

This will need a careful audit from the lightnvm folks, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:16:10 -06:00
Christoph Hellwig
27fa9bc545 nvme: split nvme status from block req->errors
We want our own clearly defined error field for NVMe passthrough commands,
and the request errors field is going away in its current form.

Just store the status and result field in the nvme_request field from
hardirq completion context (using a new helper) and then generate a
Linux errno for the block layer only when we actually need it.

Because we can't overload the status value with a negative error code
for cancelled command we now have a flags filed in struct nvme_request
that contains a bit for this condition.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:16:10 -06:00
Christoph Hellwig
d663b69ff3 nvme-fc: fix status code handling in nvme_fc_fcpio_done
nvme_complete_async_event expects the little endian status code
including the phase bit, and a new completion handler I plan to
introduce will do so as well.

Change the status variable into the little endian format with the
phase bit used in the NVMe CQE to fix / enable this.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:16:10 -06:00
Bart Van Assche
9460e28022 lightnvm: Use blk_init_request_from_bio() instead of open-coding it
This patch changes the behavior of the lightnvm driver as follows:
* REQ_FAILFAST_MASK is set for read-ahead requests.
* If no I/O priority has been set in the bio, the I/O priority is
  copied from the I/O context.
* The rq_disk member is initialized if bio->bi_bdev != NULL.
* The bio sector offset is copied into req->__sector instead of
  retaining the value -1 set by blk_mq_alloc_request().
* req->errors is initialized to zero.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <m@bjorling.me>
Cc: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 17:38:33 -06:00
Christoph Hellwig
0ff199cb48 nvme/pci: Switch to pci_request_irq()
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-04-18 13:43:29 -05:00
Javier González
e85292feb9 lightnvm: bad type conversion for nvme control bits
The NVMe I/O command control bits are 16 bytes, but is interpreted as
32 bytes in the lightnvm user I/O data path.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 10:06:25 -06:00
Matias Bjørling
48d663a314 lightnvm: enable nvme size compile asserts
The asserts in _nvme_nvm_check_size are not compiled due to the function
not begin called. Make sure that it is called, and also fix the wrong
sizes of asserts for nvme_nvm_addr_format, and nvme_nvm_bb_tbl, which
checked for number of bits instead of bytes.

Reported-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 10:06:25 -06:00
Javier González
17912c49ed lightnvm: submit erases using the I/O path
Until now erases have been submitted as synchronous commands through a
dedicated erase function. In order to enable targets implementing
asynchronous erases, refactor the erase path so that it uses the normal
async I/O submission functions. If a target requires sync I/O, it can
implement it internally. Also, adapt rrpc to use the new erase path.

Signed-off-by: Javier González <javier@cnexlabs.com>
Fixed spelling error.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>

Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 10:06:25 -06:00
Scott Bauer
2849a7becb nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identify
There are two closely named structs in lightnvm:
struct nvme_nvm_addr_format and
struct nvme_addr_format.

The first struct has 4 reserved bytes at the end, the second does not.
(gdb) p sizeof(struct nvme_nvm_addr_format)
$1 = 16
(gdb) p sizeof(struct nvm_addr_format)
$2 = 12

In the nvme_nvm_identify function we memcpy from the larger struct to the
smaller struct. We incorrectly pass the length of the larger struct
and overflow by 4 bytes, lets not do that.

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 10:06:25 -06:00
Sagi Grimberg
c6c64a942c nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability
both our sqsize and the controller MQES cap are a 0 based value,
so making it 1 based is wrong.

Reported-by: Trapp, Darren <Darren.Trapp@cavium.com>
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-09 13:58:11 -06:00
Sagi Grimberg
1af76ddaa8 nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability
both our sqsize and the controller MQES cap are a 0 based value,
so making it 1 based is wrong.

Reported-by: Trapp, Darren <Darren.Trapp@cavium.com>
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-09 13:58:09 -06:00
Christoph Hellwig
e850fd16f7 nvme: implement REQ_OP_WRITE_ZEROES
But now for the real NVMe Write Zeroes yet, just to get rid of the
discard abuse for zeroing.  Also rename the quirk flag to be a bit
more self-explanatory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Jens Axboe
65f619d253 Merge branch 'for-linus' into for-4.12/block
We've added a considerable amount of fixes for stalls and issues
with the blk-mq scheduling in the 4.11 series since forking
off the for-4.12/block branch. We need to do improvements on
top of that for 4.12, so pull in the previous fixes to make
our lives easier going forward.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07 12:45:20 -06:00
Christoph Hellwig
44e44b29fb nvme: move the retries count to struct nvme_request
The way NVMe uses this field is entirely different from the older
SCSI/BLOCK_PC usage, so move it into struct nvme_request.

Also reduce the size of the file to a unsigned char so that we leave
space for additional smaller fields that will appear soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 12:05:08 -06:00
Christoph Hellwig
83f3aeb386 nvme: mark nvme_max_retries static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 12:05:08 -06:00
Christoph Hellwig
f6324b1bb7 nvme: cleanup nvme_req_needs_retry
Don't pass the status explicitly but derive it from the requeust,
and unwind the complex condition to be more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 12:05:08 -06:00
Christoph Hellwig
987f699a8f nvme: move ->retries setup to nvme_setup_cmd
->retries is counting the number of times a command is resubmitted, and
be cleared on the first time we see the command.  We currently don't do
that for non-PCIe command, which is easily fixed by moving the setup
to common code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 12:05:08 -06:00
Christoph Hellwig
77f02a7acd nvme: factor request completion code into a common helper
This avoids duplicating the logic four times, and it also allows to keep
some helpers static in core.c or just opencode them.

Note that this loses printing the aborted status on completions in the
PCI driver as that uses a data structure not available any more.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Christoph Hellwig
4bca70d067 nvme-fc: drop ctrl for all command completions
A requeue means we go through nvme_fc_start_fcp_op again and get
another controller reference.  To make sure the refcount doesn't
leak we also need to drop it for every completion that came from
the LLDD.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
f2cd54d3eb nvme-fc: increment request retries counter before requeuing
This way our max retry limit holds as well.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
e806666e25 nvme-rdma: increment request retries counter before requeuing
This way our max retry limit holds as well.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
James Smart
62eeacb0e0 nvme_fc: Clean up host fcpio done status handling
As Dan Carpenter pointed out: mixing 16-bit nvme status with 32-bit
error status from driver. Corrected comment on fcp request struct
status field, and converted done routine to explicitly set nvme status
codes for nvme status.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
James Smart
f77fc87c37 nvme_fc: correct LS validation
LS validations shouldn't have been independent checks.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
James Smart
726a1080e5 nvme_fc: Add check of status_code in ERSP_IU
Add check of status_code in ERSP_IU

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
fd8563ced8 nvme-rdma: Support ctrl_loss_tmo
Before scheduling a reconnect attempt, check
nr_reconnects against max_reconnects, if not
exhausted (or max_reconnects is not -1), schedule
a reconnect attempts, otherwise schedule ctrl
removal.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
42a45274c2 nvme-fabrics: Allow ctrl loss timeout configuration
When a host sense that its controller session is damaged,
it tries to re-establish it periodically (reconnect every
reconnect_delay). It may very well be that the controller
is gone and never coming back, in this case the host will
try to reconnect forever.

Add a ctrl_loss_tmo to bound the number of reconnect attempts
to a specific controller (default to a reasonable 10 minutes).
The timeout configuration is actually translated into number of
reconnect attempts and not a schedule on its own but rather
divided with reconnect_delay. This is useful to prevent
racing flows of remove and reconnect, and it doesn't really
matter if we remove slightly sooner than what the user requested.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
7777bdedf3 nvme-rdma: get rid of local reconnect_delay
we already have it in opts.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
c0e4a6f594 nvme-fc: fix module_init (theoretical) error path
If nvmf_register_transport happened to fail
(it can't, but theoretically) we leak memory.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
a56c79cfd3 nvme-rdma: fix module_init (theoretical) error path
If nvmf_register_transport happened to fail
(it can't, but theoretically) we leak memory.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
0928f9b4f1 nvme-rdma: use inet_pton_with_scope helper
Both the destination and the host addresses are now
parsed using inet_pton_with_scope helper. We also
get ipv6 (with address scopes support).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
782d820ca4 nvme-rdma: Give some more grace for rdma connection establishment
The target might be occupied with multiple hosts so lets
give it some more grace before failing the connection
establishment.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Sagi Grimberg
dc2ad16ab2 nvme-rdma: handle cpu unplug when re-establishing the controller
If a cpu unplug event has occured, we need to take the minimum
of the provided nr_io_queues and the number of online cpus,
otherwise we won't be able to connect them as blk-mq mapping
won't dispatch to those queues.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04 09:48:23 -06:00
Christoph Hellwig
f1dd03a84d nvme: add missing byte swap in nvme_setup_discard
Fixes: b35ba01e ("nvme: support ranged discard requests")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-02 10:24:15 +03:00
Eric Biggers
f363b089be blk-mq: constify struct blk_mq_ops
Constify all instances of blk_mq_ops, as they are never modified.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-31 08:28:58 -06:00
Ming Lei
1671d522cd block: rename blk_mq_freeze_queue_start()
As the .q_usage_counter is used by both legacy and
mq path, we need to block new I/O if queue becomes
dead in blk_queue_enter().

So rename it and we can use this function in both
paths.

Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-29 08:03:42 -06:00
Sagi Grimberg
c248c64387 nvme-rdma: handle cpu unplug when re-establishing the controller
If a cpu unplug event has occured, we need to take the minimum
of the provided nr_io_queues and the number of online cpus,
otherwise we won't be able to connect them as blk-mq mapping
won't dispatch to those queues.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-03-21 18:38:41 +02:00
Keith Busch
302ad8cc09 nvme: Complete all stuck requests
If the nvme driver is shutting down its controller, the drievr will not
start the queues up again, preventing blk-mq's hot CPU notifier from
making forward progress.

To fix that, this patch starts a request_queue freeze when the driver
resets a controller so no new requests may enter. The driver will wait
for frozen after IO queues are restarted to ensure the queue reference
can be reinitialized when nvme requests to unfreeze the queues.

If the driver is doing a safe shutdown, the driver will wait for the
controller to successfully complete all inflight requests so that we
don't unnecessarily fail them. Once the controller has been disabled,
the queues will be restarted to force remaining entered requests to end
in failure so that blk-mq's hot cpu notifier may progress.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02 08:56:59 -07:00
Shaohua Li
d3af3ecdc6 nvme: allocate nvme_queue in correct node
nvme_queue is per-cpu queue (mostly). Allocating it in node where blk-mq
will use it.

Signed-off-by: Shaohua Li <shli@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02 08:56:04 -07:00
Masahiro Yamada
b43daedc0e scripts/spelling.txt: add "embeded" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  embeded||embedded

Link: http://lkml.kernel.org/r/1481573103-11329-12-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Linus Torvalds
ac1820fb28 This is a tree wide change and has been kept separate for that reason.
Bart Van Assche noted that the ib DMA mapping code was significantly
 similar enough to the core DMA mapping code that with a few changes
 it was possible to remove the IB DMA mapping code entirely and
 switch the RDMA stack to use the core DMA mapping code.  This resulted
 in a nice set of cleanups, but touched the entire tree.  This branch
 will be submitted separately to Linus at the end of the merge window
 as per normal practice for tree wide changes like this.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
 CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
 Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
 xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
 ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
 IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
 ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
 XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
 3e7mgpcwC+3XfA/6vU3F
 =e0Si
 -----END PGP SIGNATURE-----

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...
2017-02-25 13:45:43 -08:00
Scott Bauer
e286bcfc59 nvme/pci: re-check security protocol support after reset
A device may change capabilities after each reset, e.g. due to a firmware
upgrade.  We should thus check for Security Send/Receive and OPAL support
after each reset.

Based on patches from Christoph and Keith.

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-23 11:55:43 -07:00
Daniel Roschka
124298bd03 nvme: detect NVMe controller in recent MacBooks
Adds support for detection of the NVMe controller found in the
following recent MacBooks:
- Retina MacBook 2016 (MacBook9,1)
- 13" MacBook Pro 2016 without Touch Bar (MacBook13,1)
- 13" MacBook Pro 2016 with Touch Bar (MacBook13,2)

Signed-off-by: Daniel Roschka <danielroschka@phoenitydawn.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 15:17:29 -07:00
Max Gurtovoy
8f4e8dace3 nvme-rdma: add support for host_traddr
This will enable the user to control the specific interface for
connection establishment in case the host has more than 1 interface
under the same subnet.
E.g:
Host interfaces configured as:
 - ib0 1.1.1.1/16
 - ib1 1.1.1.2/16

Target interfaces configured as:
 - ib0 1.1.1.3/16 (listener interface)
 - ib1 1.1.1.4/16

the following connect command will go through host iface ib0 (default):
nvme connect -t rdma -n testsubsystem -a 1.1.1.3 -s 1023

but the following command will go through host iface ib1:
nvme connect -t rdma -n testsubsystem -a 1.1.1.3 -s 1023 -w 1.1.1.2

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Max Gurtovoy
3ee80c3d15 nvme-rdma: move nvme cm status helper to .h file
This will enable the usage for nvme rdma target.
Also move from a lookup array to a switch statement.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
James Smart
faef3af69d nvme-fc: don't bother to validate ioccsz and iorcsz
Discovery controllers don't set the values. They are in reserved
areas of the Identify Controller data structure.

Given the cmd completed, the minimal capsule sizes are supported,
so no need to check nqn to detect discovery controllers and
special case validations.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Keith Busch
9ef3932e25 nvme/pci: No special case for queue busy on IO
This driver previously required we have a special check for IO submitted
to nvme IO queues that are temporarily suspended. That is no longer
necessary since blk-mq provides a quiesce, so any IO that actually gets
submitted to such a queue must be ended since the queue isn't going to
start back up.

This is fixing a condition where we have fewer IO queues after a
controller reset. This may happen if the number of CPU's has changed,
or controller firmware update changed the queue count, for example.

While it may be possible to complete the IO on a different queue, the
block layer does not provide a way to resubmit a request on a different
hardware context once the request has entered the queue. We don't want
these requests to be stuck indefinitely either, so ending them in error
is our only option at the moment.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Keith Busch
f33447b90e nvme/core: Fix race kicking freed request_queue
If a namespace has already been marked dead, we don't want to kick the
request_queue again since we may have just freed it from another thread.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Keith Busch
6db28eda26 nvme/pci: Disable on removal when disconnected
If the device is not present, the driver should disable the queues
immediately. Prior to this, the driver was relying on the watchdog timer
to kill the queues if requests were outstanding to the device, and that
just delays removal up to one second.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Andy Lutomirski
c5552fde10 nvme: Enable autonomous power state transitions
NVMe devices can advertise multiple power states.  These states can
be either "operational" (the device is fully functional but possibly
slow) or "non-operational" (the device is asleep until woken up).
Some devices can automatically enter a non-operational state when
idle for a specified amount of time and then automatically wake back
up when needed.

The hardware configuration is a table.  For each state, an entry in
the table indicates the next deeper non-operational state, if any,
to autonomously transition to and the idle time required before
transitioning.

This patch teaches the driver to program APST so that each successive
non-operational state will be entered after an idle time equal to 100%
of the total latency (entry plus exit) associated with that state.
The maximum acceptable latency is controlled using dev_pm_qos
(e.g. power/pm_qos_latency_tolerance_us in sysfs); non-operational
states with total latency greater than this value will not be used.
As a special case, setting the latency tolerance to 0 will disable
APST entirely.  On hardware without APST support, the sysfs file will
not be exposed.

The latency tolerance for newly-probed devices is set by the module
parameter nvme_core.default_ps_max_latency_us.

In theory, the device can expose "default" APST table, but this
doesn't seem to function correctly on my device (Samsung 950), nor
does it seem particularly useful.  There is also an optional
mechanism by which a configuration can be "saved" so it will be
automatically loaded on reset.  This can be configured from
userspace, but it doesn't seem useful to support in the driver.

On my laptop, enabling APST seems to save nearly 1W.

The hardware tables can be decoded in userspace with nvme-cli.
'nvme id-ctrl /dev/nvmeN' will show the power state table and
'nvme get-feature -f 0x0c -H /dev/nvme0' will show the current APST
configuration.

This feature is quirked off on a known-buggy Samsung device.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Andy Lutomirski
bd4da3abaa nvme: Add a quirk mechanism that uses identify_ctrl
Currently, all NVMe quirks are based on PCI IDs.  Add a mechanism to
define quirks based on identify_ctrl's vendor id, model number,
and/or firmware revision.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Johannes Thumshirn
e5a39dd823 nvme: make nvmf_register_transport require a create_ctrl callback
nvmf_create_ctrl() relys on the presence of a create_crtl callback in the
registered nvmf_transport_ops, so make nvmf_register_transport require one.

Update the available call-sites as well to reflect these changes.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Parav Pandit
986994a275 nvme: Use CNS as 8-bit field and avoid endianness conversion
This patch defines CNS field as 8-bit field and avoids cpu_to/from_le
conversions.
Also initialize nvme_command cns value explicitly to NVME_ID_CNS_NS
for readability (don't rely on the fact that NVME_ID_CNS_NS = 0).

Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Max Gurtovoy
778f067c18 nvme: add semicolon in nvme_command setting
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Sagi Grimberg
8432bdb290 nvme: Make controller state visible via sysfs
Easier for debugging and testing state machine
transitions.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 13:34:00 -07:00
Jens Axboe
818551e2b2 Merge branch 'for-4.11/next' into for-4.11/linus-merge
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 14:08:19 -07:00
Jens Axboe
6010720da8 Merge branch 'for-4.11/block' into for-4.11/linus-merge
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 14:06:45 -07:00
Scott Bauer
8a9ae52328 nvme: Check for Security send/recv support before issuing commands.
We need to verify that the controller supports the security
commands before actually trying to issue them.

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
[hch: moved the check so that we don't call into the OPAL code if not
      supported]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 12:41:49 -07:00
Christoph Hellwig
4f1244c829 block/sed-opal: allocate struct opal_dev dynamically
Insted of bloating the containing structure with it all the time this
allocates struct opal_dev dynamically.  Additionally this allows moving
the definition of struct opal_dev into sed-opal.c.  For this a new
private data field is added to it that is passed to the send/receive
callback.  After that a lot of internals can be made private as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 12:41:47 -07:00
Scott Bauer
e225c20eb0 Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN
When CONFIG_KASAN is enabled, compilation fails:

block/sed-opal.c: In function 'sed_ioctl':
block/sed-opal.c:2447:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Moved all the ioctl structures off the stack and dynamically allocate
using _IOC_SIZE()

Fixes: 455a7b238c ("block: Add Sed-opal library")

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14 19:47:18 -07:00
Christoph Hellwig
b35ba01ea6 nvme: support ranged discard requests
NVMe supports up to 256 ranges per DSM command, so wire up support
for ranged discards up to that limit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-08 13:43:10 -07:00
Scott Bauer
a98e58e54f nvme: Add Support for Opal: Unlock from S3 & Opal Allocation/Ioctls
This patch implements the necessary logic to unlock an Opal
enabled device coming back from an S3.

The patch also implements the SED/Opal allocation necessary to support
the opal ioctls.

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06 09:44:21 -07:00
Christoph Hellwig
aebf526b53 block: fold cmd_type into the REQ_OP_ space
Instead of keeping two levels of indirection for requests types, fold it
all into the operations.  The little caveat here is that previously
cmd_type only applied to struct request, while the request and bio op
fields were set to plain REQ_OP_READ/WRITE even for passthrough
operations.

Instead this patch adds new REQ_OP_* for SCSI passthrough and driver
private requests, althought it has to add two for each so that we
can communicate the data in/out nature of the request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 14:00:44 -07:00
Christoph Hellwig
57292b58dd block: introduce blk_rq_is_passthrough
This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 14:00:34 -07:00
Keith Busch
7bf7d77862 nvme/pci: Don't mark IOD as aborted if abort wasn't sent
This patch sets the aborted flag only if an abort was sent, reducing
excessive kernel message spamming for completed IO that wasn't actually
aborted.

Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 08:34:47 -07:00
Matias Bjørling
06894efea7 lightnvm: use end_io callback instead of instance
When the lightnvm core had the "gennvm" layer between the device and the
target, there was a need for the core to be able to figure out which
target it should send an end_io callback to. Leading to a "double"
end_io, first for the media manager instance, and then for the target
instance. Now that core and gennvm is merged, there is no longer a need
for this, and a single end_io callback will do.

Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 08:32:13 -07:00
Matias Bjørling
84d4add793 lightnvm: add ioctls for vector I/Os
Enable user-space to issue vector I/O commands through ioctls. To issue
a vector I/O, the ppa list with addresses is also required and must be
mapped for the controller to access.

For each ioctl, the result and status bits are returned as well, such
that user-space can retrieve the open-channel SSD completion bits.

The implementation covers the traditional use-cases of bad block
management, and vectored read/write/erase.

Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Metadata implementation, test, and fixes.
Signed-off-by: Simon A.F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 08:32:13 -07:00
Matias Bjørling
19bd6fe73c lightnvm: reduce number of nvm_id groups to one
The number of configuration groups has been limited to one in current
code, even if there is support for up to four. With the introduction
of the open-channel SSD 1.3 specification, only a single
group is exposed onwards. Reflect this in the nvm_id structure.

Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 08:32:13 -07:00
Matias Bjørling
ade69e2432 lightnvm: merge gennvm with core
For the first iteration of Open-Channel SSDs, it was anticipated that
there could be various media managers on top of an open-channel SSD,
such to allow vendors to plug in their own host-side FTLs, without the
media manager in between.

Now that an Open-Channel SSD is exposed as a traditional block device,
there is no longer a need for this. Therefore lets merge the gennvm code
with core and simplify the stack.

Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 08:32:13 -07:00
Christoph Hellwig
1a7347c7db nvme/scsi: don't rely on BLK_MAX_CDB
The NVMe SCSI emulation doesn't use BLOCK_PC requests, so BLK_MAX_CDB
doesn't have a meaning for it.  Instead opencode the value of 16
and refactor the code a bit so that related checks are next to each
other and we only need to use the value in one place.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-30 08:33:51 -07:00
Jens Axboe
f605208e01 nvme: fix compilation of scsi component
Since we moved the cdb parts and define out of the block proper,
we need to include scsi/scsi_request.h for the nvme scsi layer.

Fixes: 82ed4db499 ("block: split scsi_request out of struct request")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-29 20:04:49 -07:00
Jens Axboe
f924ba70c1 Merge branch 'for-4.11/block' into for-4.11/rq-refactor
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:31 -07:00
Christoph Hellwig
19e420bb40 nvme-fc: use blk_rq_nr_phys_segments
Without this deallocate won't work properly due to the mismatch
of the bio/request size and the actual payload size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-01-26 17:49:14 +02:00
Bart Van Assche
92f4ae3559 nvme-rdma: Switch from dma_device to dev.parent
Prepare for removal of ib_device.dma_device.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:26:17 -05:00
Jens Axboe
d348499138 blk-mq-sched: allow setting of default IO scheduler
Add Kconfig entries to manage what devices get assigned an MQ
scheduler, and add a blk-mq flag for drivers to opt out of scheduling.
The latter is useful for admin type queues that still allocate a blk-mq
queue and tag set, but aren't use for normal IO.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:04:31 -07:00
Christoph Hellwig
b131c61d62 nvme: use blk_rq_payload_bytes
The new blk_rq_payload_bytes generalizes the payload length hacks
that nvme_map_len did before.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-13 15:17:04 -07:00
Guilherme G. Piccoli
b5a10c5f75 nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Commit 54adc01055 ("nvme/quirk: Add a delay before checking for adapter
readiness") introduced a quirk to adapters that cannot read the bit
NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters
need a delay or else the action of reading the bit NVME_CSTS_RDY could
somehow corrupt adapter's registers state and it never recovers.

When this quirk was added, we checked ctrl->tagset in order to avoid
quirking in probe time, supposing we would never require such delay
during probe. Well, it was too optimistic; we in fact need this quirk
at probe time in some cases, like after a kexec.

In some experiments, after abnormal shutdown of machine (aka power cord
unplug), we booted into our bootloader in Power, which is a Linux kernel,
and kexec'ed into another distro. If this kexec is too quick, we end up
reaching the probe of NVMe adapter in that distro when adapter is in
bad state (not fully initialized on our bootloader). What happens next
is that nvme_wait_ready() is unable to complete, except if the quirk is
enabled.

So, this patch removes the original ctrl->tagset verification in order
to enable the quirk even on probe time.

Fixes: 54adc01055 ("nvme/quirk: Add a delay before checking for adapter readiness")
Reported-by: Andrew Byrne <byrneadw@ie.ibm.com>
Reported-by: Jaime A. H. Gomez <jahgomez@mx1.ibm.com>
Reported-by: Zachary D. Myers <zdmyers@us.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Jeffrey Lien <Jeff.Lien@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-01-11 17:21:35 +01:00
Christoph Hellwig
1392370ee7 nvme-rdma: fix nvme_rdma_queue_is_ready
Now that we don't abuse the cmd field in struct request for nvme command
passthrough this function needs to be converted to the proper accessor
as well.

Fixes: d49187e97e ("nvme: introduce struct nvme_request")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2017-01-11 17:20:39 +01:00
Jens Axboe
8e5d31eb02 Merge branch 'nvme-4.10' of git://git.infradead.org/nvme into for-linus
Christoph writes:

The most significant one is that we've agreed on shared maintaince and
a common repository for the PCIe NVMe driver and NVMe over Fabrics.  The
target code still only has a subset of the maintainers but goes through
the same tree as well.  Keith, Sagi and me will take turns at collecting
patches and sending you pull requests.
2016-12-22 11:54:46 -07:00
Johannes Thumshirn
17a1ec08ce nvme/fc: simplify error handling of nvme_fc_create_hw_io_queues
Simplify the error handling of nvme_fc_create_hw_io_queues(), this saves us
one variable and one level of indentation.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviwed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:34:25 +01:00
James Smart
c703489885 nvme/fc: correct some printk information
Dan Carpenters's tool caught a pointer reference - should have been
just ptr, not &ptr.

Don't bother. Remove the pointer value in the printf. Its irrelevant.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:31 +01:00
Andy Lutomirski
2c473a9d02 nvme/scsi: Remove START STOP emulation
Now that the broken power state control is gone, it appears to serve
no purpose.  Just delete it.  NVME devices don't have a concept of
started vs stopped anyway.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:24 +01:00
Keith Busch
ff13b39ecf nvme/pci: Delete misleading queue-wrap comment
It is not theoretically possible for this driver to wrap twice while
processing completions. The driver allocates only 'queue_depth - 1'
tags, so there can never be more than that to reap when processing a
completion queue. Removing this misleading comment makes it a little
less likely people with broken controllers will blame the driver for
their spurious interrupts.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:23 +01:00
Max Gurtovoy
9fa196e7fc nvme/pci: Fix whitespace problem
Convert to tabs and remove unneeded whitespaces.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:18 +01:00
Keith Busch
e6282aef7b nvme: simplify stripe quirk
Some OEMs believe they own the Identify Controller vendor specific
region and will repurpose it with their own values. While not common,
we can't rely on the PCI VID:DID to tell use how to decode the field
we reserved for this as the stripe size so we need to do something else
for the list of devices using this quirk.

The field was supposed to allow flexibility on the device's back-end
striping, but it turned out that never materialized; the chunk is always
the same as MDTS in the products subscribing to this quirk, so this
patch removes the stripe_size field and sets the chunk to the max hw
transfer size for the devices using this quirk.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:06 +01:00
Stephen Bates
c965809c66 nvme : Use correct scnprintf in cmb show
Make sure we are using the correct scnprintf in the sysfs show
function for the CMB.

Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-19 08:35:24 -07:00
Linus Torvalds
4d5b57e05a Updates for 4.10 kernel merge window
- Shared mlx5 updates with net stack (will drop out on merge if Dave's
   tree has already been merged)
 - Driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
 - Debug cleanups
 - New connection rejection helpers
 - SRP updates
 - Various misc fixes
 - New paravirt driver from vmware
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYUbAPAAoJELgmozMOVy/dMXcP/iuG5MNzfN8Ny1JftyBQGWg3
 cqoQ2OLj9CsXjwVB+5EqbcZHRZY852lKONaLoDKkIOx4YAXO2YuIKOp944vN7EQx
 96wfqzT1F5jzAcy5mYZXgLaStGFDAwejKMqeHd0LfJj3OEtemGnVPWYzyqSQmSKo
 dzJraS1Z9GIRppzU5WaRpB9PtRBkqIqGJ5vZ0EKLGhed5hYY5r0iMJB0GfriMRDO
 lJ4UUVfpsAoLPnqDBFH6IMn2V2UeAw9IR5zNa1mrM1RBfvt/uYTxrw1w3p9WoaNs
 GRodhk4DCeAfeyqzVPNBLyXZ4Zq4FzGe3UWM4qysJ1RR4oFNw9Cuw0Fqk8mrfznr
 7hv5TpGIckRZiKf8l6e+qLirF0qGtXJg29j2vPVQI9i5nSj95g1agA81PnLQlLLb
 flWyxeMj81my7lfMHN1xcV6pqPEKMCOysZmfcvVfJd2XxpjuVD7ekl/YXWp8o8kU
 YPdQMqPD626XsD8VpPdMszb9FPmx0JD0HEv+Y1rIFX8JegEI+c3H2X0dqC27T/Ou
 FEPWOy025EgHm0Fh/7eIzkG6tjZ4JHoCugJAcxNZGj2XW4eB6r5vY8UwJ8iQRv+n
 PVYHiy0UoIRePh0mrdOSSphGZMi/GO/DsqKwCtAMEK43WqZQju6wR7QSIGkh66mp
 4uSHJqpf3YEYylxGMhk3
 =QeGy
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma updates from Doug Ledford:
 "This is the complete update for the rdma stack for this release cycle.

  Most of it is typical driver and core updates, but there is the
  entirely new VMWare pvrdma driver. You may have noticed that there
  were changes in DaveM's pull request to the bnxt Ethernet driver to
  support a RoCE RDMA driver. The bnxt_re driver was tentatively set to
  be pulled in this release cycle, but it simply wasn't ready in time
  and was dropped (a few review comments still to address, and some
  multi-arch build issues like prefetch() not working across all
  arches).

  Summary:

   - shared mlx5 updates with net stack (will drop out on merge if
     Dave's tree has already been merged)

   - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe

   - debug cleanups

   - new connection rejection helpers

   - SRP updates

   - various misc fixes

   - new paravirt driver from vmware"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits)
  IB: Add vmw_pvrdma driver
  IB/mlx4: fix improper return value
  IB/ocrdma: fix bad initialization
  infiniband: nes: return value of skb_linearize should be handled
  MAINTAINERS: Update Intel RDMA RNIC driver maintainers
  MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers
  IB/core: fix unmap_sg argument
  qede: fix general protection fault may occur on probe
  IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc
  mlx5, calc_sq_size(): Make a debug message more informative
  mlx5: Remove a set-but-not-used variable
  mlx5: Use { } instead of { 0 } to init struct
  IB/srp: Make writing the add_target sysfs attr interruptible
  IB/srp: Make mapping failures easier to debug
  IB/srp: Make login failures easier to debug
  IB/srp: Introduce a local variable in srp_add_one()
  IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build
  IB/multicast: Check ib_find_pkey() return value
  IPoIB: Avoid reading an uninitialized member variable
  IB/mad: Fix an array index check
  ...
2016-12-15 12:03:32 -08:00
Linus Torvalds
cf1b3341af Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block IO fixes from Jens Axboe:
 "A few fixes that I collected as post-merge.

  I was going to wait a bit with sending this out, but the O_DIRECT fix
  should really go in sooner rather than later"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: Fix failed allocation path when mapping queues
  blk-mq: Avoid memory reclaim when remapping queues
  block_dev: don't update file access position for sync direct IO
  nvme/pci: Log PCI_STATUS when the controller dies
  block_dev: don't test bdev->bd_contains when it is not stable
2016-12-14 17:21:53 -08:00
Steve Wise
7f03953c2f nvme-rdma: use rdma connection reject helper functions
Also add nvme cm status strings and use them.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14 11:38:28 -05:00
Andy Lutomirski
d2a6191840 nvme/pci: Log PCI_STATUS when the controller dies
When debugging nvme controller crashes, it's nice to know whether
the controller died cleanly so that the failure is just reflected in
CSTS, it died and put an error in PCI_STATUS, or whether it died so
badly that it stopped responding to PCI configuration space reads.

I've seen a failure that gives 0xffff in PCI_STATUS on a Samsung
"SM951 NVMe SAMSUNG 256GB" with firmware "BXW75D0Q".

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>

Fixed up white space and hunk reject.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-13 21:07:08 -07:00
Linus Torvalds
cdb98c2698 Revert "nvme: add support for the Write Zeroes command"
This reverts commit 6d31e3ba23.

This causes bootup problems for me both on my laptop and my desktop.
What they have in common is that they have NVMe disks with dm-crypt, but
it's not the same controller, so it's not controller-specific.

Jens does not see it on his machine (also NVMe), so it's presumably
something that triggers just on bootup.  Possibly related to dm-crypt
and the fact that I mark my luks volume with "allow-discards" in
/etc/crypttab.

It's 100% repeatable for me, which made it fairly straightforward to
bisect the problem to this commit. Small mercies.

So we don't know what the reason is yet, but the revert is needed to get
things going again.

Acked-by: Jens Axboe <axboe@fb.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-13 19:53:37 -08:00
Linus Torvalds
b92e09bb5b Merge branch 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Adam added opt-in ATA command priority support.

 - There are machines which hide multiple nvme devices behind an ahci
   BAR. Dan Williams proposed a solution to force-switch the mode but
   deemed too hackishd. People are gonna discuss the proper way to
   handle the situation in nvme standard meetings. For now, detect and
   warn about the situation.

 - Low level driver specific changes.

Christoph Hellwig pipes in about the hidden nvme warning:
 "I wish that was the case. We've pretty much agreed that we'll want to
  implement it as a virtual PCIe root bridge, similar to Intels other
  'innovation' VMD that we work around that way.

  But Intel management has apparently decided that they don't want to
  spend more cycles on this now that Lenovo has an optional BIOS that
  doesn't force this broken mode anymore, and no one outside of Intel
  has enough information to implement something like this.

  So for now I guess this warning is it, until Intel reconsideres and
  spends resources on fixing up the damage their Chipset people caused"

* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: warn about remapped NVMe devices
  ahci-remap.h: add ahci remapping definitions
  nvme: move NVMe class code to pci_ids.h
  pata: imx: support controller modes up to PIO4
  pata: imx: add support of setting timings for PIO modes
  pata: imx: set controller PIO mode with .set_piomode callback
  pata: imx: sort headers out
  ata: set ncq_prio_enabled iff device has support
  ata: ATA Command Priority Disabled By Default
  ata: Enabling ATA Command Priorities
  block: Add iocontext priority to request
  ahci: qoriq: added ls1046a platform support
2016-12-13 13:26:24 -08:00
Linus Torvalds
36869cb93d Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...
2016-12-13 10:19:16 -08:00
Christoph Hellwig
f9d03f96b9 block: improve handling of the magic discard payload
Instead of allocating a single unused biovec for discard requests, send
them down without any payload.  Instead we allow the driver to add a
"special" payload using a biovec embedded into struct request (unioned
over other fields never used while in the driver), and overloading
the number of segments for this case.

This has a couple of advantages:

 - we don't have to allocate the bio_vec
 - the amount of special casing for discard requests in the block
   layer is significantly reduced
 - using this same scheme for other request types is trivial,
   which will be important for implementing the new WRITE_ZEROES
   op on devices where it actually requires a payload (e.g. SCSI)
 - we can get rid of playing games with the request length, as
   we'll never touch it and completions will work just fine
 - it will allow us to support ranged discard operations in the
   future by merging non-contiguous discard bios into a single
   request
 - last but not least it removes a lot of code

This patch is the common base for my WIP series for ranges discards and to
remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES,
so it would be good to get it in quickly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-09 08:30:51 -07:00
James Smart
e399441de9 nvme-fabrics: Add host support for FC transport
Implements the FC-NVME T11 definition of how nvme fabric capsules are
performed on an FC fabric. Utilizes a lower-layer API to FC host adapters
to send/receive FC-4 LS operations and FCP operations that comprise NVME
over FC operation.

The T11 definitions for FC-4 Link Services are implemented which create
NVMeOF connections.  Implements the hooks with blk-mq to then submit admin
and io requests to the different connections.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:56 +02:00
James Smart
721b3917c4 nvme-fabrics: set sqe.command_id in core not transports
Currently, core.c sets command_id only on rd/wr commands, leaving it to
the transport to set it again to ensure the request had a command id.

Move location of set in core so applies to all commands.
Remove transport sets.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Max Gurtovoy
27a4beef0b nvme-rdma: align to generic ib_event logging helper
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:03 +02:00
Sagi Grimberg
d4a5340edd nvme-rdma: remove redundant define
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
6eb7283054 nvme-fabrics: Adjust source code indentation
Adjust indentation such that arguments are aligned.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
6bcb5268d4 nvme/scsi: Remove set-but-not-used variables
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
f3116d8f1e nvme-fabrics: Fix a memory leak in an nvmf_create_ctrl() error path
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
8eadfcb1b6 nvme-fabrics: Fix memory leaks in nvmf_parse_options()
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Samuel Jones
76c08bf46a nvme-rdma: force queue size to respect controller capability
Queue size needs to respect the Maximum Queue Entries Supported advertised by
the controller in its Capability register.

Signed-off-by: Samuel Jones <sjones@kalray.eu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[sagig: fixed queue_size adjustment according to
Daniel Verkamp <daniel.verkamp@intel.com> comment]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Christoph Hellwig
a2e7eefd56 nvme: move NVMe class code to pci_ids.h
We'll need to check for it in the AHCI drivers (yes, really) soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-05 14:31:23 -05:00
Chaitanya Kulkarni
6d31e3ba23 nvme: add support for the Write Zeroes command
Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block
device, if the device supports optional command bit set for write
zeroes. Add support to setup write zeroes command. Set maximum possible
write zeroes sectors in one write zeroes command according to
nvme write zeroes command definition.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01 07:58:40 -07:00
Javier González
8e53624d44 lightnvm: eliminate nvm_lun abstraction in mm
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.

Since targets own the LUNs the are instantiated on top of and manage the
free block list internally, there is no need for a LUN abstraction in
the media manager. LUNs are intrinsically managed as in the physical
layout (ch:0,lun:0, ..., ch:0,lun:n, ch:1,lun:0, ch:1,lun:n, ...,
ch:m,lun:0, ch:m,lun:n) and given to the targets based on the target
creation ioctl. This simplifies LUN management and clears the path for a
partition manager to sit directly underneath LightNVM targets.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Javier González
8e79b5cb1d lightnvm: move block provisioning to targets
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.

This patch moves the block provisioning inside of the target and removes
the get/put block interface from the media manager.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Javier González
bb3149792e lightnvm: enable to send hint to erase command
Erases might be subject to host hints. An example is multi-plane
programming to erase blocks in parallel. Enable targets to specify this
hint.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Matias Bjørling
3dc87dd048 nvme: lightnvm: attach lightnvm sysfs to nvme block device
Previously, LBA read and write were not supported in the lightnvm
specification. Now that it supports it, lets use the traditional
NVMe gendisk, and attach the lightnvm sysfs geometry export.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Matias Bjørling
7498e99fc5 nvme: lightnvm: frees wrong cmd structure
When struct nvme_request was introduced, the nvme_nvm_submit_io was
converted to the new interface. The interface moves nvme_nvm_command
data structure into the struct request pdu. On io completion, rq->cmd is
freed, which should have been the dereferenced pdu nvme_request->cmd.

Fixes: d49187e97e "nvme: introduce struct nvme_request"
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Keith Busch
d48756228e nvme/pci: Don't free queues on error
The nvme_remove function tears down all allocated resources in the correct
order, so no need to free queues on error during initialization. This
fixes possible use-after-free errors when queues are still associated
with a blk-mq hctx.

Reported-by: Scott Bauer <scott.bauer@intel.com>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-16 12:39:57 -07:00
Omar Sandoval
bac0000af5 nvme: untangle 0 and BLK_MQ_RQ_QUEUE_OK
Let's not depend on any of the BLK_MQ_RQ_QUEUE_* constants having
specific values. No functional change.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-15 12:50:11 -07:00
Steve Wise
c8dbc37cd8 nvme-rdma: stop and free io queues on connect failure
While testing nvme-rdma with the spdk nvmf target over iw_cxgb4, I
configured the target (mistakenly) to generate an error creating the
NVMF IO queues.  This resulted a "Invalid SQE Parameter" error sent back
to the host on the first IO queue connect:

[ 9610.928182] nvme nvme1: queue_size 128 > ctrl maxcmd 120, clamping down
[ 9610.938745] nvme nvme1: creating 32 I/O queues.

So nvmf_connect_io_queue() returns an error to
nvmf_connect_io_queue() / nvmf_connect_io_queues(), and that
is returned to nvme_rdma_create_io_queues().  In the error path,
nvmf_rdma_create_io_queues() frees the queue tagset memory _before_
stopping and freeing the IB queues, which causes yet another
touch-after-free crash due to SQ CQEs being flushed after the ib_cqe
structs pointed-to by the flushed WRs have been freed (since they are
part of the nvme_rdma_request struct).

The fix is to stop and free the queues in nvmf_connect_io_queues()
if there is an error connecting any of the queues.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:53 +02:00
Christoph Hellwig
553cd9ef82 nvme-rdma: reject non-connect commands before the queue is live
If we reconncect we might have command queue up that get resent as soon
as the queue is restarted.  But until the connect command succeeded we
can't send other command.  Add a new flag that marks a queue as live when
connect finishes, and delay any non-connect command until the queue is
live based on it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
[sagig: fixes admin queue LIVE setting]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:51 +02:00
Matias Bjørling
409ae5a76e lightnvm: invalid offset calculation for lba_shift
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.

Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.

Fixes: b0b4e09c1a "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-11 18:27:32 -07:00
Christoph Hellwig
7bf58533a0 nvme: don't pass the full CQE to nvme_complete_async_event
We only need the status and result fields, and passing them explicitly
makes life a lot easier for the Fibre Channel transport which doesn't
have a full CQE for the fast path case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 10:06:26 -07:00
Christoph Hellwig
d49187e97e nvme: introduce struct nvme_request
This adds a shared per-request structure for all NVMe I/O.  This structure
is embedded as the first member in all NVMe transport drivers request
private data and allows to implement common functionality between the
drivers.

The first use is to replace the current abuse of the SCSI command
passthrough fields in struct request for the NVMe command passthrough,
but it will grow a field more fields to allow implementing things
like common abort handlers in the future.

The passthrough commands are handled by having a pointer to the SQE
(struct nvme_command) in struct nvme_request, and the union of the
possible result fields, which had to be turned from an anonymous
into a named union for that purpose.  This avoids having to pass
a reference to a full CQE around and thus makes checking the result
a lot more lightweight.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 10:06:24 -07:00
Bart Van Assche
a6eaa8849f nvme: Use BLK_MQ_S_STOPPED instead of QUEUE_FLAG_STOPPED in blk-mq code
Make nvme_requeue_req() check BLK_MQ_S_STOPPED instead of
QUEUE_FLAG_STOPPED. Remove the QUEUE_FLAG_STOPPED manipulations
that became superfluous because of this change. Change
blk_queue_stopped() tests into blk_mq_queue_stopped().

This patch fixes a race condition: using queue_flag_clear_unlocked()
is not safe if any other function that manipulates the queue flags
can be called concurrently, e.g. blk_cleanup_queue().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Bart Van Assche
3174dd33fa nvme: Fix a race condition related to stopping queues
Avoid that nvme_queue_rq() is still running when nvme_stop_queues()
returns.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Bart Van Assche
2b053aca76 blk-mq: Add a kick_requeue_list argument to blk_mq_requeue_request()
Most blk_mq_requeue_request() and blk_mq_add_to_requeue_list() calls
are followed by kicking the requeue list. Hence add an argument to
these two functions that allows to kick the requeue list. This was
proposed by Christoph Hellwig.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Bart Van Assche
9b7dd572cc blk-mq: Remove blk_mq_cancel_requeue_work()
Since blk_mq_requeue_work() no longer restarts stopped queues
canceling requeue work is no longer needed to prevent that a
stopped queue would be restarted. Hence remove this function.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Christoph Hellwig
e806402130 block: split out request-only flags into a new namespace
A lot of the REQ_* flags are only used on struct requests, and only of
use to the block layer and a few drivers that dig into struct request
internals.

This patch adds a new req_flags_t rq_flags field to struct request for
them, and thus dramatically shrinks the number of common requests.  It
also removes the unfortunate situation where we have to fit the fields
from the same enum into 32 bits for struct bio and 64 bits for
struct request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28 08:45:17 -06:00
Linus Torvalds
ecd06f2883 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A set of fixes that missed the merge window, mostly due to me being
  away around that time.

  Nothing major here, a mix of nvme cleanups and fixes, and one fix for
  the badblocks handling"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvmet: use symbolic constants for CNS values
  nvme: use symbolic constants for CNS values
  nvme.h: add an enum for cns values
  nvme.h: don't use uuid_be
  nvme.h: resync with nvme-cli
  nvme: Add tertiary number to NVME_VS
  nvme : Add sysfs entry for NVMe CMBs when appropriate
  nvme: don't schedule multiple resets
  nvme: Delete created IO queues on reset
  nvme: Stop probing a removed device
  badblocks: fix overlapping check for clearing
2016-10-21 10:54:01 -07:00
Christoph Hellwig
fa60682677 nvme: use symbolic constants for CNS values
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19 11:36:22 -06:00
Gabriel Krisman Bertazi
8ef2074d28 nvme: Add tertiary number to NVME_VS
NVMe 1.2.1 specification adds a tertiary element to the version number.
This updates the macro and its callers to include the final number and
fixup a single place in nvmet where the version was generated manually.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19 11:36:22 -06:00
Stephen Bates
202021c1a6 nvme : Add sysfs entry for NVMe CMBs when appropriate
Add a sysfs attribute that contains salient information about the NVMe
Controller Memory Buffer when one is present. For now, just display the
information about the CMB available from the control registers. We attach
the CMB attribute file to the existing nvme_ctrl sysfs group so it can
handle the sysfs teardown.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 11:10:28 -06:00
Keith Busch
c5f6ce97c1 nvme: don't schedule multiple resets
The queue_work only fails if the work is pending, but not yet running. If
the work is running, the work item would get requeued, triggering a
double reset. If the first reset fails for any reason, the second
reset triggers:

	WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)

Hitting that schedules controller deletion for a second time, which
potentially takes a reference on the device that is being deleted.
If the reset occurs at the same time as a hot removal event, this causes
a double-free.

This patch has the reset helper function check if the work is busy
prior to queueing, and changes all places that schedule resets to use
this function. Since most users don't want to sync with that work, the
"flush_work" is moved to the only caller that wants to sync.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg<sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 09:24:39 -06:00
Keith Busch
7065906096 nvme: Delete created IO queues on reset
The driver was decrementing the online_queues prior to attempting to
delete those IO queues, so the driver ended up not requesting the
controller delete any. This patch saves the online_queues prior to
suspending them, and adds that parameter for deleting io queues.

Fixes: c21377f8 ("nvme: Suspend all queues before deletion")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 09:22:16 -06:00
Keith Busch
0df1e4f5e0 nvme: Stop probing a removed device
There is no reason the nvme controller can ever return all 1's from
reading the CSTS register. This patch returns an error if we observe
that status. Without this, we may incorrectly proceed with controller
initialization and unnecessarilly rely on error handling to clean this.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 08:40:13 -06:00
Mauricio Faria de Oliveira
2b6b535d91 nvme: use the DMA_ATTR_NO_WARN attribute
Use the DMA_ATTR_NO_WARN attribute for the dma_map_sg() call of the nvme
driver that returns BLK_MQ_RQ_QUEUE_BUSY (not for BLK_MQ_RQ_QUEUE_ERROR).

Link: http://lkml.kernel.org/r/1470092390-25451-4-git-send-email-mauricfo@linux.vnet.ibm.com
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:32 -07:00
Linus Torvalds
12e3d3cdd9 Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-block
Pull blk-mq irq/cpu mapping updates from Jens Axboe:
 "This is the block-irq topic branch for 4.9-rc. It's mostly from
  Christoph, and it allows drivers to specify their own mappings, and
  more importantly, to share the blk-mq mappings with the IRQ affinity
  mappings. It's a good step towards making this work better out of the
  box"

* 'for-4.9/block-irq' of git://git.kernel.dk/linux-block:
  blk_mq: linux/blk-mq.h does not include all the headers it depends on
  blk-mq: kill unused blk_mq_create_mq_map()
  blk-mq: get rid of the cpumask in struct blk_mq_tags
  nvme: remove the post_scan callout
  nvme: switch to use pci_alloc_irq_vectors
  blk-mq: provide a default queue mapping for PCI device
  blk-mq: allow the driver to pass in a queue mapping
  blk-mq: remove ->map_queue
  blk-mq: only allocate a single mq_map per tag_set
  blk-mq: don't redistribute hardware queues on a CPU hotplug event
2016-10-09 17:29:33 -07:00
Linus Torvalds
b9044ac829 Merge of primary rdma-core code for 4.9
- Updates to mlx5
 - Updates to mlx4 (two conflicts, both minor and easily resolved)
 - Updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper
   resolution is to keep the code in cxgb4_main.c as it is in Linus'
   tree as attach_uld was refactored and moved into cxgb4_uld.c)
 - Improvements to uAPI (moved vendor specific API elements to uAPI area)
 - Add hns-roce driver and hns and hns-roce ACPI reset support
 - Conversion of all rdma code away from deprecated
   create_singlethread_workqueue
 - Security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
   staging)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX+AwSAAoJELgmozMOVy/d0WkQAKxPzVccMWwHv28iZI4ey13u
 JwE+VoCNpCAZAVuEgzK5zzFdNHPvAk2jU93H4apA7dfXJBXPatVuj9Lnk+ieEEnW
 tbFwJjBpbQ3Zol3+SPfAHnsVMbtax+xmd6WDKExPXXEDl1L6rutwL3KKfmgWEitg
 ysX7XOJCiSdyM0hcg4T6UPB9a3jGPff9NLu0oGamV+yoUk5Y0WGoVFxHZ4MKcw8t
 OkFBYIxGz4SGwq2tulStuH03HteURX594KngtrA8dyq6l1R2GlGRv+bkJAUEIWUv
 aA0ow3VWusOM6fT+jLXPCv8iUwIXM8tR/U6F7X+cmORUUtWvCl+uCUVid113j/aN
 BK+Af2nJnfoJ5cDBPsD+bC76l5gQycNZO/Qh8op2kmgJtD+6OpGM3cBXsHx53+kk
 0wloJ2lKCGShWxNj+ig8n8rR/rhhs/x3vV3ouCVWNMbOUgOSN3eYHxmK3wGFW4nd
 Qx+WYCjj9Yi/J6nmUDcfEQ4NWPR22Q2+0ENAabfhLhV6mDloAO5ILHd4GDqC3IA9
 UtxlVjf4ZonaiLnTQQzCnDMGVVk6tT8FJ9D42s0ScwjbdYwjyCW9/rs/g2EhcprR
 Cc+AmjqLviCWGtzBSFO0SijqQon8lcQOwdLw61CdFFvPa/mlLdf1rbx9ArIyNVKn
 JSrbr3CGyoqyYj6qaEO5
 =LC+S
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull main rdma updates from Doug Ledford:
 "This is the main pull request for the rdma stack this release.  The
  code has been through 0day and I had it tagged for linux-next testing
  for a couple days.

  Summary:

   - updates to mlx5

   - updates to mlx4 (two conflicts, both minor and easily resolved)

   - updates to iw_cxgb4 (one conflict, not so obvious to resolve,
     proper resolution is to keep the code in cxgb4_main.c as it is in
     Linus' tree as attach_uld was refactored and moved into
     cxgb4_uld.c)

   - improvements to uAPI (moved vendor specific API elements to uAPI
     area)

   - add hns-roce driver and hns and hns-roce ACPI reset support

   - conversion of all rdma code away from deprecated
     create_singlethread_workqueue

   - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
     staging)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits)
  staging/lustre: Disable InfiniBand support
  iw_cxgb4: add fast-path for small REG_MR operations
  cxgb4: advertise support for FR_NSMR_TPTE_WR
  IB/core: correctly handle rdma_rw_init_mrs() failure
  IB/srp: Fix infinite loop when FMR sg[0].offset != 0
  IB/srp: Remove an unused argument
  IB/core: Improve ib_map_mr_sg() documentation
  IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets
  IB/mthca: Move user vendor structures
  IB/nes: Move user vendor structures
  IB/ocrdma: Move user vendor structures
  IB/mlx4: Move user vendor structures
  IB/cxgb4: Move user vendor structures
  IB/cxgb3: Move user vendor structures
  IB/mlx5: Move and decouple user vendor structures
  IB/{core,hw}: Add constant for node_desc
  ipoib: Make ipoib_warn ratelimited
  IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue
  IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue
  IB/ipoib: Remove deprecated create_singlethread_workqueue
  ...
2016-10-09 17:04:33 -07:00
Linus Torvalds
513a4befae Merge branch 'for-4.9/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the main pull request for block layer changes in 4.9.

  As mentioned at the last merge window, I've changed things up and now
  do just one branch for core block layer changes, and driver changes.
  This avoids dependencies between the two branches. Outside of this
  main pull request, there are two topical branches coming as well.

  This pull request contains:

   - A set of fixes, and a conversion to blk-mq, of nbd. From Josef.

   - Set of fixes and updates for lightnvm from Matias, Simon, and Arnd.
     Followup dependency fix from Geert.

   - General fixes from Bart, Baoyou, Guoqing, and Linus W.

   - CFQ async write starvation fix from Glauber.

   - Add supprot for delayed kick of the requeue list, from Mike.

   - Pull out the scalable bitmap code from blk-mq-tag.c and make it
     generally available under the name of sbitmap. Only blk-mq-tag uses
     it for now, but the blk-mq scheduling bits will use it as well.
     From Omar.

   - bdev thaw error progagation from Pierre.

   - Improve the blk polling statistics, and allow the user to clear
     them. From Stephen.

   - Set of minor cleanups from Christoph in block/blk-mq.

   - Set of cleanups and optimizations from me for block/blk-mq.

   - Various nvme/nvmet/nvmeof fixes from the various folks"

* 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits)
  fs/block_dev.c: return the right error in thaw_bdev()
  nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
  nvme/scsi: Remove power management support
  nvmet: Make dsm number of ranges zero based
  nvmet: Use direct IO for writes
  admin-cmd: Added smart-log command support.
  nvme-fabrics: Add host_traddr options field to host infrastructure
  nvme-fabrics: revise host transport option descriptions
  nvme-fabrics: rework nvmf_get_address() for variable options
  nbd: use BLK_MQ_F_BLOCKING
  blkcg: Annotate blkg_hint correctly
  cfq: fix starvation of asynchronous writes
  blk-mq: add flag for drivers wanting blocking ->queue_rq()
  blk-mq: remove non-blocking pass in blk_mq_map_request
  blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
  block: export bio_free_pages to other modules
  lightnvm: propagate device_add() error code
  lightnvm: expose device geometry through sysfs
  lightnvm: control life of nvm_dev in driver
  blk-mq: register device instead of disk
  ...
2016-10-07 14:42:05 -07:00
Andy Lutomirski
1a6fe74dfd nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
Any user I can imagine that needs a buffer at all will want to pass
a pointer directly.  There are no currently callers that use
buffers, so this change is painless, and it will make it much easier
to start using features that use buffers (e.g. APST).

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Tested-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-24 10:56:26 -06:00
Andy Lutomirski
26501db8dc nvme/scsi: Remove power management support
As far as I can tell, there is basically nothing correct about this
code.  It misinterprets npss (off-by-one).  It hardcodes a bunch of
power states, which is nonsense, because they're all just indices
into a table that software needs to parse.  It completely ignores
the distinction between operational and non-operational states.
And, until 4.8, if all of the above magically succeeded, it would
dereference a NULL pointer and OOPS.

Since this code appears to be useless, just delete it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Tested-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-24 10:56:25 -06:00
James Smart
478bcb9388 nvme-fabrics: Add host_traddr options field to host infrastructure
Add the host_traddr field to allow specification of the host-port
connection info for the transport. Will be used by FC transport.

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
James Smart
4a9f05c57f nvme-fabrics: revise host transport option descriptions
Revise some of the comments so not so ethernet-network centric

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
James Smart
0fe51ff269 nvme-fabrics: rework nvmf_get_address() for variable options
Revise nvmf_get_address() string to account for not all options being
present.

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
Christoph Hellwig
11975e0149 nvme-rdma: use IB_PD_UNSAFE_GLOBAL_RKEY
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-23 13:47:44 -04:00
Christoph Hellwig
ed082d36a7 IB/core: add support to create a unsafe global rkey to ib_create_pd
Instead of exposing ib_get_dma_mr to ULPs and letting them use it more or
less unchecked, this moves the capability of creating a global rkey into
the RDMA core, where it can be easily audited.  It also prints a warning
everytime this feature is used as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-23 13:47:44 -04:00
Sagi Grimberg
3b4ac78610 nvme-rdma: only clear queue flags after successful connect
Otherwise, nvme_rdma_stop_and_clear_queue() will incorrectly
try to stop/free rdma qps/cm_ids that are already freed.

Fixes: e89ca58f9c ("nvme-rdma: add DELETING queue flag")
Reported-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 19:58:17 -06:00
Simon A. F. Lund
40267efddc lightnvm: expose device geometry through sysfs
For a host to access an Open-Channel SSD, it has to know its geometry,
so that it writes and reads at the appropriate device bounds.

Currently, the geometry information is kept within the kernel, and not
exported to user-space for consumption. This patch exposes the
configuration through sysfs and enables user-space libraries, such as
liblightnvm, to use the sysfs implementation to get the geometry of an
Open-Channel SSD.

The sysfs entries are stored within the device hierarchy, and can be
found using the "lightnvm" device type.

An example configuration looks like this:

/sys/class/nvme/
└── nvme0n1
   ├── capabilities: 3
   ├── device_mode: 1
   ├── erase_max: 1000000
   ├── erase_typ: 1000000
   ├── flash_media_type: 0
   ├── media_capabilities: 0x00000001
   ├── media_type: 0
   ├── multiplane: 0x00010101
   ├── num_blocks: 1022
   ├── num_channels: 1
   ├── num_luns: 4
   ├── num_pages: 64
   ├── num_planes: 1
   ├── page_size: 4096
   ├── prog_max: 100000
   ├── prog_typ: 100000
   ├── read_max: 10000
   ├── read_typ: 10000
   ├── sector_oob_size: 0
   ├── sector_size: 4096
   ├── media_manager: gennvm
   ├── ppa_format: 0x380830082808001010102008
   ├── vendor_opcode: 0
   ├── max_phys_secs: 64
   └── version: 1

Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:57:31 -06:00
Matias Bjørling
b0b4e09c1a lightnvm: control life of nvm_dev in driver
LightNVM compatible device drivers does not have a method to expose
LightNVM specific sysfs entries.

To enable LightNVM sysfs entries to be exposed, lightnvm device
drivers require a struct device to attach it to. To allow both the
actual device driver and lightnvm sysfs entries to coexist, the device
driver tracks the lifetime of the nvm_dev structure.

This patch refactors NVMe and null_blk to handle the lifetime of struct
nvm_dev, which eliminates the need for struct gendisk when a lightnvm
compatible device is provided.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:56:18 -06:00
Matias Bjørling
ac81bfa986 nvme: refactor namespaces to support non-gendisk devices
With LightNVM enabled namespaces, the gendisk structure is not exposed
to the user. This prevents LightNVM users from accessing the NVMe device
driver specific sysfs entries, and LightNVM namespace geometry.

Refactor the revalidation process, so that a namespace, instead of a
gendisk, is revalidated. This later allows patches to wire up the
sysfs entries up to a non-gendisk namespace.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:56:12 -06:00
Linus Torvalds
46626600d1 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A set of fixes for the current series in the realm of block.

  Like the previous pull request, the meat of it are fixes for the nvme
  fabrics/target code.  Outside of that, just one fix from Gabriel for
  not doing a queue suspend if we didn't get the admin queue setup in
  the first place"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-rdma: add back dependency on CONFIG_BLOCK
  nvme-rdma: fix null pointer dereference on req->mr
  nvme-rdma: use ib_client API to detect device removal
  nvme-rdma: add DELETING queue flag
  nvme/quirk: Add a delay before checking device ready for memblaze device
  nvme: Don't suspend admin queue that wasn't created
  nvme-rdma: destroy nvme queue rdma resources on connect failure
  nvme_rdma: keep a ref on the ctrl during delete/flush
  iw_cxgb4: block module unload until all ep resources are released
  iw_cxgb4: call dev_put() on l2t allocation failure
2016-09-15 13:22:59 -07:00
Christoph Hellwig
b5af7f2ff0 nvme: remove the post_scan callout
No need now that we don't have to reverse engineer the irq affinity.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig
dca51e7892 nvme: switch to use pci_alloc_irq_vectors
Use the new helper to automatically select the right interrupt type, as
well as to use the automatic interupt affinity assignment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig
7d7e0f90b7 blk-mq: remove ->map_queue
All drivers use the default, so provide an inline version of it.  If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.

This provides better code generation, and better debugability as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Jens Axboe
3bc42f3f0e Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into for-linus
Sagi writes:

Here we have:
- Kconfig dependencies fix from Arnd
- nvme-rdma device removal fixes from Steve
- possible bad deref fix from Colin
2016-09-13 07:58:34 -06:00
Arnd Bergmann
2cfe199ca5 nvme-rdma: add back dependency on CONFIG_BLOCK
A recent change removed the dependency on BLK_DEV_NVME, which implies
the dependency on PCI and BLOCK. We don't need CONFIG_PCI, but without
CONFIG_BLOCK we get tons of build errors, e.g.

In file included from drivers/nvme/host/core.c:16:0:
linux/blk-mq.h:182:33: error: 'struct gendisk' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
drivers/nvme/host/core.c: In function 'nvme_setup_rw':
drivers/nvme/host/core.c:295:21: error: implicit declaration of function 'rq_data_dir' [-Werror=implicit-function-declaration]
drivers/nvme/host/nvme.h: In function 'nvme_map_len':
drivers/nvme/host/nvme.h:217:6: error: implicit declaration of function 'req_op' [-Werror=implicit-function-declaration]
drivers/nvme/host/scsi.c: In function 'nvme_trans_bdev_limits_page':
drivers/nvme/host/scsi.c:768:85: error: implicit declaration of function 'queue_max_hw_sectors' [-Werror=implicit-function-declaration]

This adds back the specific CONFIG_BLOCK dependency to avoid broken
configurations.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aa71987472 ("nvme: fabrics drivers don't need the nvme-pci driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-12 22:29:43 +03:00
Colin Ian King
1bda18de8f nvme-rdma: fix null pointer dereference on req->mr
If there is an error on req->mr, req->mr is set to null, however
the following statement sets req->mr->need_inval causing a null
pointer dereference.  Fix this by bailing out to label 'out' to
immediately return and hence skip over the offending null pointer
dereference.

Fixes: f5b7b559e1 ("nvme-rdma: Get rid of duplicate variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-12 22:29:42 +03:00
Steve Wise
e87a911fed nvme-rdma: use ib_client API to detect device removal
Change nvme-rdma to use the IB Client API to detect device removal.
This has the wonderful benefit of being able to blow away all the
ib/rdma_cm resources for the device being removed.  No craziness about
not destroying the cm_id handling the event.  No deadlocks due to broken
iw_cm/rdma_cm/iwarp dependencies.  And no need to have a bound cm_id
around during controller recovery/reconnect to catch device removal
events.

We don't use the device_add aspect of the ib_client service since we only
want to create resources for an IB device if we have a target utilizing
that device.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-12 22:29:41 +03:00
Sagi Grimberg
e89ca58f9c nvme-rdma: add DELETING queue flag
When we get a surprise disconnect from the target we queue a periodic
reconnect (which is the sane thing to do...).

We only move the queues out of CONNECTED when we retry to reconnect (after
10 seconds in the default case) but we stop the blk queues immediately
so we are not bothered with traffic from now on. If delete() is kicking
off in this period the queues are still in CONNECTED state.

Part of the delete sequence is trying to issue ctrl shutdown if the
admin queue is CONNECTED (which it is!). This request is issued but
stuck in blk-mq waiting for the queues to start again. This might be
the one preventing us from forward progress...

The patch separates the queue flags to CONNECTED and DELETING. Now we
will move out of CONNECTED as soon as error recovery kicks in (before
stopping the queues) and DELETING is on when we start the queue deletion.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-12 22:29:34 +03:00
Linus Torvalds
bd0b841fee nvme: make NVME_RDMA depend on BLOCK
Commit aa71987472 ("nvme: fabrics drivers don't need the nvme-pci
driver") removed the dependency on BLK_DEV_NVME, but the cdoe does
depend on the block layer (which used to be an implicit dependency
through BLK_DEV_NVME).

Otherwise you get various errors from the kbuild test robot random
config testing when that happens to hit a configuration with BLOCK
device support disabled.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Jay Freyensee <james_p_freyensee@linux.intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-11 14:41:49 -07:00
Wenbo Wang
015282c9eb nvme/quirk: Add a delay before checking device ready for memblaze device
Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-08 10:17:45 -06:00
Gabriel Krisman Bertazi
82469c59d2 nvme: Don't suspend admin queue that wasn't created
This fixes a regression in my previous commit c21377f836 ("nvme:
Suspend all queues before deletion"), which provoked an Oops in the
removal path when removing a device that became IO incapable very early
at probe (i.e. after a failed EEH recovery).

Turns out, if the error occurred very early at the probe path, before
even configuring the admin queue, we might try to suspend the
uninitialized admin queue, accessing bad memory.

Fixes: c21377f836 ("nvme: Suspend all queues before deletion")
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-07 08:53:21 -06:00
Steve Wise
f361e5a01e nvme-rdma: destroy nvme queue rdma resources on connect failure
After address resolution, the nvme_rdma_queue rdma resources are
allocated.  If rdma route resolution or the connect fails, or the
controller reconnect times out and gives up, then the rdma resources
need to be freed.  Otherwise, rdma resources are leaked.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimbrg.me>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-04 10:00:54 +03:00
Steve Wise
cdbecc8d24 nvme_rdma: keep a ref on the ctrl during delete/flush
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimbrg.me>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-04 10:00:53 +03:00
Jens Axboe
d8d8d9d789 Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into for-linus
Sagi writes:

Mostly stability fixes and cleanups:
- NQN endianess fix from Daniel
- possible use-after-free fix from Vincent
- nvme-rdma connect semantics fixes from Jay
- Remove redundant variables in rdma driver
- Kbuild fix from Christoph
- nvmf_host referencing fix from Christoph
- uninit variable fix from Colin
2016-08-29 08:39:22 -06:00
Sagi Grimberg
4d8c6a7946 nvme-rdma: Get rid of redundant defines
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-28 15:41:08 +03:00
Sagi Grimberg
f5b7b559e1 nvme-rdma: Get rid of duplicate variable
We already have need_inval in ib_mr, lets use
that instead.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-28 15:40:54 +03:00
Andy Lutomirski
9b47f77a68 nvme: Fix nvme_get/set_features() with a NULL result pointer
nvme_set_features() callers seem to expect that passing NULL as the
result pointer is acceptable.  Teach nvme_set_features() not to try to
write to the NULL address.

For symmetry, make the same change to nvme_get_features(), despite the
fact that all current callers pass a valid result pointer.

I assume that this bug hasn't been reported in practice because
the callers that pass NULL are all in the SCSI translation layer
and no one uses the relevant operations.

Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 08:11:10 -06:00
Christoph Hellwig
aa71987472 nvme: fabrics drivers don't need the nvme-pci driver
So select the NVME_CORE symbol instead of depending on BLK_DEV_NVME.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-19 14:22:28 +03:00
Christoph Hellwig
98096d8a78 nvme-fabrics: get a reference when reusing a nvme_host structure
Without this we'll get a use after free after connecting two controller
using the same hostnqn and then disconnecting one of them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-19 14:22:12 +03:00
Daniel Verkamp
7a665d2f60 nvme-fabrics: change NQN UUID to big-endian format
NVM Express 1.2.1 section 7.9, NVMe Qualified Names, specifies that the
UUID format of NQN uses a UUID based on RFC 4122.

RFC 4122 specifies that the UUID is encoded in big-endian byte order.

Switch the NVMe over Fabrics host ID field from little-endian UUID to
big-endian UUID to match the specification.

Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-19 12:00:44 +03:00
Jay Freyensee
c5af8654c4 nvme-rdma: fix sqsize/hsqsize per spec
Per NVMe-over-Fabrics 1.0 spec, sqsize is represented as
a 0-based value.

Also per spec, the RDMA binding values shall be set
to sqsize, which makes hsqsize 0-based values.

Thus, the sqsize during NVMf connect() is now:

[root@fedora23-fabrics-host1 for-48]# dmesg
[  318.720645] nvme_fabrics: nvmf_connect_admin_queue(): sqsize for
admin queue: 31
[  318.720884] nvme nvme0: creating 16 I/O queues.
[  318.810114] nvme_fabrics: nvmf_connect_io_queue(): sqsize for i/o
queue: 127

Finally, current interpretation implies hrqsize is 1's based
so set it appropriately.

Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-18 09:58:06 +03:00
Jay Freyensee
f994d9dc28 fabrics: define admin sqsize min default, per spec
Upon admin queue connect(), the rdma qp was being
set based on NVMF_AQ_DEPTH.  However, the fabrics layer was
using the sqsize field value set for I/O queues for the admin
queue, which threw the nvme layer and rdma layer off-whack:

root@fedora23-fabrics-host1 nvmf]# dmesg
[ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize
being sent is: 128
[ 3507.798858] nvme nvme0: creating 16 I/O queues.
[ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr
192.168.1.3:4420

Thus, to have a different admin queue value, we use
NVMF_AQ_DEPTH for connect() and RDMA private data
as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec
(and in that RDMA private data we treat hrqsize as 1's-based
value, per current understanding of the fabrics spec).

Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-18 09:58:05 +03:00
Colin Ian King
39bbee4e54 nvme-rdma: initialize ret to zero to avoid returning garbage
ret is not initialized so it contains garbage.  Ensure garbage
is not returned by initializing rc to 0.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-16 11:42:29 +03:00
Gabriel Krisman Bertazi
f6b6a28e2d nvme: Prevent controller state invalid transition
Acquiring the nvme_ctrl lock before reading ctrl->state in
nvme_change_ctrl_state() should prevent a theoretical invalid state
transition, in the event of two threads racing inside that function.

I haven't been able to observe this happening with the current code, and
the current state machine seems to be simple enough to not be
affected by these invalid transitions, but future modifications could
make it more likely to happen.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sag@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-15 09:46:46 -06:00
Gabriel Krisman Bertazi
c21377f836 nvme: Suspend all queues before deletion
When nvme_delete_queue fails in the first pass of the
nvme_disable_io_queues() loop, we return early, failing to suspend all
of the IO queues.  Later, on the nvme_pci_disable path, this causes us
to disable MSI without actually having freed all the IRQs, which
triggers the BUG_ON in free_msi_irqs(), as show below.

This patch refactors nvme_disable_io_queues to suspend all queues before
start submitting delete queue commands.  This way, we ensure that we
have at least returned every IRQ before continuing with the removal
path.

[  487.529200] kernel BUG at ../drivers/pci/msi.c:368!
cpu 0x46: Vector: 700 (Program Check) at [c0000078c5b83650]
    pc: c000000000627a50: free_msi_irqs+0x90/0x200
    lr: c000000000627a40: free_msi_irqs+0x80/0x200
    sp: c0000078c5b838d0
   msr: 9000000100029033
  current = 0xc0000078c5b40000
  paca    = 0xc000000002bd7600   softe: 0        irq_happened: 0x01
    pid   = 1376, comm = kworker/70:1H
kernel BUG at ../drivers/pci/msi.c:368!
Linux version 4.7.0.mainline+ (root@iod76) (gcc version 5.3.1 20160413
(Ubuntu/IBM 5.3.1-14ubuntu2.1) ) #104 SMP Fri Jul 29 09:20:17 CDT 2016
enter ? for help
[c0000078c5b83920] d0000000363b0cd8 nvme_dev_disable+0x208/0x4f0 [nvme]
[c0000078c5b83a10] d0000000363b12a4 nvme_timeout+0xe4/0x250 [nvme]
[c0000078c5b83ad0] c0000000005690e4 blk_mq_rq_timed_out+0x64/0x110
[c0000078c5b83b40] c00000000056c930 bt_for_each+0x160/0x170
[c0000078c5b83bb0] c00000000056d928 blk_mq_queue_tag_busy_iter+0x78/0x110
[c0000078c5b83c00] c0000000005675d8 blk_mq_timeout_work+0xd8/0x1b0
[c0000078c5b83c50] c0000000000e8cf0 process_one_work+0x1e0/0x590
[c0000078c5b83ce0] c0000000000e9148 worker_thread+0xa8/0x660
[c0000078c5b83d80] c0000000000f2090 kthread+0x110/0x130
[c0000078c5b83e30] c0000000000095f0 ret_from_kernel_thread+0x5c/0x6c

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-11 09:35:57 -06:00
Jens Axboe
d3f422c8d5 Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into for-linus
Sagi writes:

Mostly stability fixes for nvmet, rdma:
- fix uninitialized rdma_cm private data from Roland.
- rdma device removal handling (host and target).
- fix controller disconnect during active mounts.
- fix namespaces lost after fabric reconnects.
- remove redundant calls to namespace removal (rdma, loop).
- actually send controller shutdown when disconnecting.
- reconnect fixes (ns rescan and aen requeue)
- nvmet controller serial number inconsistency fix.
2016-08-08 07:42:42 -06:00
Sagi Grimberg
e3266378bd nvme-rdma: Remove unused includes
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
2016-08-04 17:47:54 +03:00
Sagi Grimberg
3ef1b4b298 nvme-rdma: start async event handler after reconnecting to a controller
When we reset or reconnect to a controller, we are cancelling the
async event handler so we can safely re-establish resources, but we
need to remember to start it again when we successfully reconnect.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-04 17:45:35 +03:00
Sagi Grimberg
45862ebcc4 nvme-rdma: Make sure to shutdown the controller if we can
Relying on ctrl state in nvme_rdma_shutdown_ctrl is wrong because
it will never be NVME_CTRL_LIVE (delete_ctrl or reset_ctrl invoked it).

Instead, check that the admin queue is connected. Note that it is safe
because we can never see a copmeting thread trying to destroy the admin
queue (reset or delete controller).

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03 16:25:23 +03:00
Sagi Grimberg
a34ca17a97 nvme-rdma: Free the I/O tags when we delete the controller
If we wait until we free the controller (free_ctrl) we might
lose our rdma device without any notification while we still
have open resources (tags mrs and dma mappings).

Instead, destroy the tags with their rdma resources once we
delete the device and not when freeing it.

Note that we don't do that in nvme_rdma_shutdown_ctrl because
controller reset uses it as well and we want to give active I/O
a chance to complete successfully.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03 16:25:16 +03:00
Sagi Grimberg
2461a8dd38 nvme-rdma: Remove duplicate call to nvme_remove_namespaces
nvme_uninit_ctrl already does that for us. Note that we reordered
nvme_rdma_shutdown_ctrl and nvme_uninit_ctrl, this is perfectly
fine because we actually want ctrl uninit (aen, scan cancellation
and namespaces removal) to happen before we shutdown the rdma
resources.

Also, centralize the deletion work and the dead controller removal
work code duplication into __nvme_rdma_shutdown_ctrl that accepts
a shutdown boolean.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03 16:25:11 +03:00
Sagi Grimberg
57de5a0a40 nvme-rdma: Fix device removal handling
Device removal sequence may have crashed because the
controller (and admin queue space) was freed before
we destroyed the admin queue resources. Thus we
want to destroy the admin queue and only then queue
controller deletion and wait for it to complete.

More specifically we:
1. own the controller deletion (make sure we are not
   competing with another deletion).
2. get rid of inflight reconnects if exists (which
   also destroy and create queues).
3. destroy the queue.
4. safely queue controller deletion (and wait for it
   to complete).

Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03 16:25:07 +03:00
Sagi Grimberg
5f372eb3e7 nvme-rdma: Queue ns scanning after a sucessful reconnection
On an ordered target shutdown, the target can send a AEN on a namespace
removal, this will trigger the host to queue ns-list query. The shutdown
will trigger error recovery which will attepmt periodic reconnect.

We can hit a race where the ns rescanning fails (error recovery kicked
in and we're not connected) causing removing all the namespaces and when
we reconnect we won't see any namespaces for this controller.

So, queue a namespace rescan after we successfully reconnected to the target.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03 16:25:03 +03:00
Roland Dreier
0b857b44b5 nvme-rdma: Don't leak uninitialized memory in connect request private data
Zero out the full nvme_rdma_cm_req structure before sending it.
Otherwise we end up leaking kernel memory in the reserved field, which
might break forward compatibility in the future.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-08-03 16:24:57 +03:00
Linus Torvalds
c8d0267efd PCI changes for the v4.8 merge window:
Enumeration
     Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
     Add parent device field to ECAM struct pci_config_window (Jayachandran C)
     Add generic MCFG table handling (Tomasz Nowicki)
     Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
     Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
 
   Resource management
     Add devm_request_pci_bus_resources() (Bjorn Helgaas)
     Unify pci_resource_to_user() declarations (Bjorn Helgaas)
     Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
     Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
     Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
     Ignore write combining when mapping I/O port space (Bjorn Helgaas)
     Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
     Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
     Support I/O resources when parsing host bridge resources (Jayachandran C)
     Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
     Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
     Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
     Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
     Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
     Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
     Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
     Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
 
   PCI device hotplug
     Allow additional bus numbers for hotplug bridges (Keith Busch)
     Ignore interrupts during D3cold (Lukas Wunner)
 
   Power management
     Enforce type casting for pci_power_t (Andy Shevchenko)
     Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
     Put PCIe ports into D3 during suspend (Mika Westerberg)
     Power on bridges before scanning new devices (Mika Westerberg)
     Runtime resume bridge before rescan (Mika Westerberg)
     Add runtime PM support for PCIe ports (Mika Westerberg)
     Remove redundant check of pcie_set_clkpm (Shawn Lin)
 
   Virtualization
     Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
     Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
     Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
     Add ACS quirk for Solarflare SFC9220 (Edward Cree)
 
   MSI
     Fix PCI_MSI dependencies (Arnd Bergmann)
     Add pci_msix_desc_addr() helper (Christoph Hellwig)
     Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
     Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
     Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
     Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
 
   Error Handling
     Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
     Remove DPC tristate module option (Keith Busch)
     Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
 
   Generic host bridge driver
     Select IRQ_DOMAIN (Arnd Bergmann)
     Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
 
   ACPI host bridge driver
     Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
     Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
     Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
     Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
 
   Altera host bridge driver
     Check link status before retrain link (Ley Foon Tan)
     Poll for link up status after retraining the link (Ley Foon Tan)
 
   Axis ARTPEC-6 host bridge driver
     Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
     Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
     Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
 
   Intel VMD host bridge driver
     Use lock save/restore in interrupt enable path (Jon Derrick)
     Select device dma ops to override (Keith Busch)
     Initialize list item in IRQ disable (Keith Busch)
     Use x86_vector_domain as parent domain (Keith Busch)
     Separate MSI and MSI-X vector sharing (Keith Busch)
 
   Marvell Aardvark host bridge driver
     Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
     Add Aardvark PCI host controller driver (Thomas Petazzoni)
     Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
 
   Microsoft Hyper-V host bridge driver
     Fix interrupt cleanup path (Cathy Avery)
     Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
     Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
 
   NVIDIA Tegra host bridge driver
     Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
     Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
     Use lower-case hex consistently for register definitions (Thierry Reding)
     Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
     Stop setting pcibios_min_mem (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Drop gen2 dummy I/O port region (Bjorn Helgaas)
 
   TI DRA7xx host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Xilinx AXI host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Miscellaneous
     Make bus_attr_resource_alignment static (Ben Dooks)
     Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
     MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
     Make host bridge drivers explicitly non-modular (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py
 n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA
 qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI
 crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx
 wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe
 UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV
 WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj
 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x
 otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy
 HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ
 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm
 aBykjRsxbKQXlhVeIxuc
 =NVxu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...
2016-08-02 17:12:29 -04:00
Linus Torvalds
3fc9d69093 Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "This branch also contains core changes.  I've come to the conclusion
  that from 4.9 and forward, I'll be doing just a single branch.  We
  often have dependencies between core and drivers, and it's hard to
  always split them up appropriately without pulling core into drivers
  when that happens.

  That said, this contains:

   - separate secure erase type for the core block layer, from
     Christoph.

   - set of discard fixes, from Christoph.

   - bio shrinking fixes from Christoph, as a followup up to the
     op/flags change in the core branch.

   - map and append request fixes from Christoph.

   - NVMeF (NVMe over Fabrics) code from Christoph.  This is pretty
     exciting!

   - nvme-loop fixes from Arnd.

   - removal of ->driverfs_dev from Dan, after providing a
     device_add_disk() helper.

   - bcache fixes from Bhaktipriya and Yijing.

   - cdrom subchannel read fix from Vchannaiah.

   - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.

   - set of drbd updates and fixes from Fabian, Lars, and Philipp.

   - mg_disk error path fix from Bart.

   - user notification for failed device add for loop, from Minfei.

   - NVMe in general:
        + NVMe delay quirk from Guilherme.
        + SR-IOV support and command retry limits from Keith.
        + fix for memory-less NUMA node from Masayoshi.
        + use UINT_MAX for discard sectors, from Minfei.
        + cancel IO fixes from Ming.
        + don't allocate unused major, from Neil.
        + error code fixup from Dan.
        + use constants for PSDT/FUSE from James.
        + variable init fix from Jay.
        + fabrics fixes from Ming, Sagi, and Wei.
        + various fixes"

* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
  nvme/pci: Provide SR-IOV support
  nvme: initialize variable before logical OR'ing it
  block: unexport various bio mapping helpers
  scsi/osd: open code blk_make_request
  target: stop using blk_make_request
  block: simplify and export blk_rq_append_bio
  block: ensure bios return from blk_get_request are properly initialized
  virtio_blk: use blk_rq_map_kern
  memstick: don't allow REQ_TYPE_BLOCK_PC requests
  block: shrink bio size again
  block: simplify and cleanup bvec pool handling
  block: get rid of bio_rw and READA
  block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
  block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
  NVMe: don't allocate unused nvme_major
  nvme: avoid crashes when node 0 is memoryless node.
  nvme: Limit command retries
  loop: Make user notify for adding loop device failed
  nvme-loop: fix nvme-loop Kconfig dependencies
  nvmet: fix return value check in nvmet_subsys_alloc()
  ...
2016-07-26 15:37:51 -07:00
Linus Torvalds
d05d7f4079 Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:

   - the big change is the cleanup from Mike Christie, cleaning up our
     uses of command types and modified flags.  This is what will throw
     some merge conflicts

   - regression fix for the above for btrfs, from Vincent

   - following up to the above, better packing of struct request from
     Christoph

   - a 2038 fix for blktrace from Arnd

   - a few trivial/spelling fixes from Bart Van Assche

   - a front merge check fix from Damien, which could cause issues on
     SMR drives

   - Atari partition fix from Gabriel

   - convert cfq to highres timers, since jiffies isn't granular enough
     for some devices these days.  From Jan and Jeff

   - CFQ priority boost fix idle classes, from me

   - cleanup series from Ming, improving our bio/bvec iteration

   - a direct issue fix for blk-mq from Omar

   - fix for plug merging not involving the IO scheduler, like we do for
     other types of merges.  From Tahsin

   - expose DAX type internally and through sysfs.  From Toshi and Yigal

* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
  block: Fix front merge check
  block: do not merge requests without consulting with io scheduler
  block: Fix spelling in a source code comment
  block: expose QUEUE_FLAG_DAX in sysfs
  block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
  Btrfs: fix comparison in __btrfs_map_block()
  block: atari: Return early for unsupported sector size
  Doc: block: Fix a typo in queue-sysfs.txt
  cfq-iosched: Charge at least 1 jiffie instead of 1 ns
  cfq-iosched: Fix regression in bonnie++ rewrite performance
  cfq-iosched: Convert slice_resid from u64 to s64
  block: Convert fifo_time from ulong to u64
  blktrace: avoid using timespec
  block/blk-cgroup.c: Declare local symbols static
  block/bio-integrity.c: Add #include "blk.h"
  block/partition-generic.c: Remove a set-but-not-used variable
  block: bio: kill BIO_MAX_SIZE
  cfq-iosched: temporarily boost queue priority for idle classes
  block: drbd: avoid to use BIO_MAX_SIZE
  block: bio: remove BIO_MAX_SECTORS
  ...
2016-07-26 15:03:07 -07:00
Keith Busch
13880f5b57 nvme/pci: Provide SR-IOV support
This registers an sr-iov callback for nvme.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:29:59 -06:00
Jay Freyensee
fa9a89fc66 nvme: initialize variable before logical OR'ing it
It is typically not good coding or secure coding practice
to logical OR a variable without an initialization value first.
Here on this line:

integrity.flags |= BLK_INTEGRITY_DEVICE_CAPABLE;

BLK_INTEGRITY_DEVICE_CAPABLE is being OR'ed to a member variable
never set to an initial value. This patch fixes that.

Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Ming Lin <ming.l@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:26:16 -06:00
Christoph Hellwig
0c4de0f33b block: ensure bios return from blk_get_request are properly initialized
blk_get_request is used for BLOCK_PC and similar passthrough requests.
Currently we always need to call blk_rq_set_block_pc or an open coded
version of it to allow appending bios using the request mapping helpers
later on, which is a somewhat awkward API.  Instead move the
initialization part of blk_rq_set_block_pc into blk_get_request, so that
we always have a safe to use request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:38:30 -06:00
Christoph Hellwig
70246286e9 block: get rid of bio_rw and READA
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces.  For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense.  Any check for READA is replaced with an
explicit check for REQ_RAHEAD.  Also remove the READA alias for
REQ_RAHEAD.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:37:01 -06:00
NeilBrown
b09dcf585d NVMe: don't allocate unused nvme_major
When alloc_disk(0) is used, the ->major number is ignored.  All device
numbers are allocated with a major of BLOCK_EXT_MAJOR.

So remove all references to nvme_major.

[akpm@linux-foundation.org: one unregister_blkdev() was missed]
Link: http://lkml.kernel.org/r/20160602064318.4403.93301.stgit@noble
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-14 08:52:56 -07:00
Keith Busch
32f0c4afb4 nvme: Remove RCU namespace protection
We can't sleep with RCU read lock held, but we need to do potentially
blocking stuff to namespace queues when iterating the list. This patch
removes the RCU locking and holds a mutex instead.

To prevent deadlocks, this patch removes holding the mutex during
namespace scanning and removal. The unlocked namespace scanning is made
safe by holding a reference to the namespace being scanned.

List iteration that does IO has to be unlocked to allow error recovery.
The caller must ensure the list can not be manipulated during such an
event, so this patch adds a comment explaining this requirement to the
only function that iterates an unlocked list. All callers currently
meet this requirement, so no further changes required.

List iterations that do not do IO can safely use the lock since it couldn't
block recovery from missing forced IO completions.

Reported-by: Ming Lin <mlin at kernel.org>
[fixes 0bf77e9 nvme: switch to RCU freeing the namespace]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-14 08:48:08 -07:00
Masayoshi Mizuma
2fa843512b nvme: avoid crashes when node 0 is memoryless node.
When CONFIG_NUMA is enabled and node 0 is memoryless, the system
crashes because nvme_probe() sets the device->numa_node to 0 by
set_dev_node(&pdev->dev, 0), so it tries to allocate memory from node 0.
To avoid the crash, we should change the 0 to first_memory_node.

Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-13 09:17:55 -07:00
Keith Busch
f80ec966c1 nvme: Limit command retries
Many controller implementations will return errors to commands that will
not succeed, but without the DNR bit set. The driver previously retried
these commands an unlimited number of times until the command timeout
has exceeded, which takes an unnecessarilly long period of time.

This patch limits the number of retries a command can have, defaulting
to 5, but is user tunable at load or runtime.

The struct request's 'retries' field is used to track the number of
retries attempted. This is in contrast with scsi's use of this field,
which indicates how many retries are allowed.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 16:20:31 -07:00
Ming Lin
e76debd996 nvme-fabrics: add-remove ctrl repeat fix
Repeatedly adding then removing the same NVMe-over-Fabrics controller
over and over again (shown below) can cause a kernel crash (also shown
below).  This patch fixes that.

[nvmf]# ./setup_nvme_connections.sh
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside
-nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=lightside
-nqn,hostnqn=good-wins-nqn > /dev/nvme-fabrics
[nvmf]# ./remove_nvme_connections.sh 2
echo 1 > /sys/class/nvme/nvme0/delete_controller
echo 1 > /sys/class/nvme/nvme1/delete_controller
[nvmf]# ./setup_nvme_connections.sh
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside
-nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics
Killed

[nvmf]# dmesg
[  313.416908] nvme nvme0: creating 16 I/O queues.
[  313.523908] nvme nvme0: new ctrl: NQN "darkside-nqn", addr
192.168.1.100:4420
[  313.524857] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  313.525262] IP: [<ffffffff8136c60e>] strcmp+0xe/0x30
[  313.525490] PGD 0
[  313.525726] Oops: 0000 [#1] SMP
[  313.525900] Modules linked in: nvme_rdma nvme_fabrics nvme_core
ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_en
mlx4_ib ib_core mlx4_core
[  313.527085] CPU: 15 PID: 5856 Comm: setup_nvme_conn Not tainted
4.7.0-rc2+ #2
[  313.527259] Hardware name: Supermicro X9DRT-F/IBQF/IBFF/X9DRT
-F/IBQF/IBFF, BIOS 1.0a 10/09/2012
[  313.527551] task: ffff88027646cd40 ti: ffff88025b980000 task.ti:
ffff88025b980000
[  313.527879] RIP: 0010:[<ffffffff8136c60e>]  [<ffffffff8136c60e>]
strcmp+0xe/0x30
[  313.528232] RSP: 0018:ffff88025b983db0  EFLAGS: 00010206
[  313.528403] RAX: 0000000000000000 RBX: ffff880471879880 RCX:
fffffffffffffff1
[  313.528594] RDX: 0000000000000000 RSI: ffff880474afa860 RDI:
0000000000000011
[  313.528778] RBP: ffff88025b983db0 R08: ffff880474afa860 R09:
ffff880471879058
[  313.528956] R10: 000000000000002c R11: ffff88047f415000 R12:
ffff880471879800
[  313.529129] R13: ffff880471879000 R14: ffff880474afa860 R15:
fffffffffffffff8
[  313.529303] FS:  00007f778f510700(0000) GS:ffff88047fbc0000(0000)
knlGS:0000000000000000
[  313.529629] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  313.529817] CR2: 0000000000000010 CR3: 0000000274174000 CR4:
00000000000406e0
[  313.529989] Stack:
[  313.530154]  ffff88025b983e48 ffffffffa0171c74 0000000000000001
0000000000000059
[  313.530621]  ffff880476f32400 ffff88047e8add80 0000010074b33aa0
ffff880471879059
[  313.531162]  ffff88047187904b ffff880471879058 0000000000000000
ffff88047736e000
[  313.531629] Call Trace:
[  313.531797]  [<ffffffffa0171c74>] nvmf_dev_write+0x674/0x840
[nvme_fabrics]
[  313.531974]  [<ffffffff81180b53>] __vfs_write+0x23/0x120
[  313.532146]  [<ffffffff8119daff>] ? __fd_install+0x1f/0xc0
[  313.532316]  [<ffffffff8119d97a>] ? __alloc_fd+0x3a/0x170
[  313.532487]  [<ffffffff811811f3>] vfs_write+0xb3/0x1b0
[  313.532658]  [<ffffffff8117e321>] ? filp_close+0x51/0x70
[  313.532845]  [<ffffffff811824e1>] SyS_write+0x41/0xa0
[  313.533016]  [<ffffffff8183055b>]
entry_SYSCALL_64_fastpath+0x13/0x8f
[  313.533188] Code: 80 3a 00 75 f7 48 83 c6 01 0f b6 4e ff 48 83 c2 01
84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 83
c7 01 <0f> b6 47 ff 48 83 c6 01 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31
[  313.536563] RIP  [<ffffffff8136c60e>] strcmp+0xe/0x30
[  313.536815]  RSP <ffff88025b983db0>
[  313.536981] CR2: 0000000000000010
[  313.537151] ---[ end trace 3d952e590e7bc2d5 ]---

Reported-and-tested-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <mlin@kernel.org>
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:32:19 -07:00
Sagi Grimberg
6a92967ccb nvme-fabrics: Remove tl_retry_count
The timeout before error recovery logic kicks in is
dictated by the nvme keep-alive, so we don't really need
a transport layer retry count. transports can retry for
as much as they like.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:31:11 -07:00
Sagi Grimberg
2ac17c283a nvme-rdma: Don't use tl_retry_count
Always use the maximum qp retry count as the
error recovery timeout is dictated from the nvme
keep-alive.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:31:10 -07:00
Wei Yongjun
458a9632ad nvme-rdma: fix the return value of nvme_rdma_reinit_request()
PTR_ERR should be applied before its argument is reassigned, otherwise the
return value will be set to 0, not error code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:27:03 -07:00
Guilherme G. Piccoli
54adc01055 nvme/quirk: Add a delay before checking for adapter readiness
When disabling the controller, the specification says the register
NVME_REG_CC should be written and then driver needs to wait the
adapter to be ready, which is checked by reading another register
bit (NVME_CSTS_RDY). There's a timeout validation in this checking,
so in case this timeout is reached the driver gives up and removes
the adapter from the system.

After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003)
(HGST adapter) end up being removed if we issue a reset_controller,
because driver keeps verifying the NVME_REG_CSTS until the timeout is
reached. This patch adds a necessary quirk for this adapter, by
introducing a delay before nvme_wait_ready(), so the reset procedure
is able to be completed. This quirk is needed because just increasing
the timeout is not enough in case of this adapter - the driver must
wait before start reading NVME_REG_CSTS register on this specific
device.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:23:00 -07:00
Jens Axboe
41d512e51b Merge branch 'for-4.8/block' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm into for-4.8/drivers
Dan writes:

"The removal of ->driverfs_dev in favor of just passing the parent
device in as a parameter to add_disk().  See below, it has received a
"Reviewed-by" from Christoph, Bart, and Johannes.

It is also a pre-requisite for Fam Zheng's work to cleanup gendisk
uevents vs attribute visibility [1].  We would extend device_add_disk()
to take an attribute_group list.

This is based off a branch of block.git/for-4.8/drivers and has
received a positive build success notification from the kbuild robot
across several configs.

[1]: "gendisk: Generate uevent after attribute available"
http://marc.info/?l=linux-virtualization&m=146725201522201&w=2"
2016-07-08 16:04:11 -06:00
Christoph Hellwig
7110230719 nvme-rdma: add a NVMe over Fabrics RDMA host driver
This patch implements the RDMA host (initiator in SCSI speak) driver.  It
can be used to connect to remote NVMe over Fabrics controllers over
Infiniband, RoCE or iWarp, and uses the existing NVMe core driver as well
a the new fabrics library.

To connect to all NVMe over Fabrics controller reachable on a given taget
port using RDMA/CM use the following command:

	nvme connect-all -t rdma -a $IPADDR

This requires the latest version of nvme-cli with Fabrics support.

Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Christoph Hellwig
def61eca96 nvme: add new reconnecting controller state
The nvme fabric (RDMA, FC, etc...) can introduce port, link or node
failures that may require a reconnect to re-establish the connection.

Add a new reconnecting state that will initially be used by the RDMA
driver.

Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Johannes Thumshirn
6f92970219 nvme: lightnvm: make MLC num_pairs little endian
According to the OpenChannel SSD interface specification the NAND flash
MLC page pairing information's number of page page pairings field is the
first two bytes in the MLC Page Pairing data structure. The hardware's
data structure itself is little endian so annotate it as such, like the
rest of lighnvm's data structures.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Sagi Grimberg
038bd4cb67 nvme: add keep-alive support
Periodic keep-alive is a mandatory feature in NVMe over Fabrics, and
optional in NVMe 1.2.1 for PCIe.  This patch adds periodic keep-alive
sent from the host to verify that the controller is still responsive
and vice-versa.  The keep-alive timeout is user-defined (with
keep_alive_tmo connection parameter) and defaults to 5 seconds.

In order to avoid a race condition where the host sends a keep-alive
competing with the target side keep-alive timeout expiration, the host
adds a grace period of 10 seconds when publishing the keep-alive timeout
to the target.

In case a keep-alive failed (or timed out), a transport specific error
recovery kicks in.

For now only NVMe over Fabrics is wired up to support keep alive, but
we can add PCIe support easily once controllers actually supporting it
become available.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:20 -06:00
Christoph Hellwig
07bfcd09a2 nvme-fabrics: add a generic NVMe over Fabrics library
The NVMe over Fabrics library provides an interface for both transports
and the nvme core to handle fabrics specific commands and attributes
independent of the underlying transport.

In addition, the fabrics library adds a misc device interface that allow
actually creating a fabrics controller, as we can't just autodiscover
it like in the PCI case.  The nvme-cli utility has been enhanced to use
this interface to support fabric connect and discovery.

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>,
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>,
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:16 -06:00
Christoph Hellwig
eb793e2c92 nvme.h: add NVMe over Fabrics definitions
The NVMe over Fabrics specification defines a protocol interface and
related extensions to NVMe that enable operation over network protocols.
The NVMe over Fabrics specification has an NVMe Transport binding for
each NVMe Transport.

This patch adds the fabrics related definitions:
- fabric specific command set and error codes
- transport addressing and binding definitions
- fabrics sgl extensions
- controller identification fabrics enhancements
- discovery log page definition

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:14 -06:00
Ming Lin
1a353d85b0 nvme: add fabrics sysfs attributes
- delete_controller: This attribute allows to delete a controller.
  A driver is not obligated to support it (pci doesn't) so it is
  created only if the driver supports it. The new fabrics drivers
  will support it (essentialy a disconnect operation).

  Usage:
  echo > /sys/class/nvme/nvme0/delete_controller

- subsysnqn: This attribute shows the subsystem nqn of the configured
  device. If a driver does not implement the get_subsysnqn method, the
  file will not appear in sysfs.

- transport: This attribute shows the transport name. Added a "name"
  field to struct nvme_ctrl_ops.

  For loop,
  cat /sys/class/nvme/nvme0/transport
  loop

  For RDMA,
  cat /sys/class/nvme/nvme0/transport
  rdma

  For PCIe,
  cat /sys/class/nvme/nvme0/transport
  pcie

- address: This attributes shows the controller address. The fabrics
  drivers that will implement get_address can show the address of the
  connected controller.

  example:
  cat /sys/class/nvme/nvme0/address
  traddr=192.168.2.2,trsvcid=1023

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:12 -06:00
Christoph Hellwig
eb71f43557 nvme: Modify and export sync command submission for fabrics
NVMe over fabrics will use __nvme_submit_sync_cmd in the the
transport and require a few tweaks to it.  For that we export it
and add a few more paramters:

1. allow passing a queue ID to the block layer

   For the NVMe over Fabrics connect command we need to able to specify a
   queue ID that we want to send the command on.  Add a qid parameter to
   the relevant functions to enable this behavior.

2. allow submitting at_head commands

   In cases where we want to (re)connect to a controller
   where we have inflight queued commands we want to first
   connect and only then allow the other queued commands to
   be kicked. This will prevents failures in controller resets
   and reconnects.

3. allow passing flags to blk_mq_allocate_request

   Both for Fabrics connect the the keep-alive feature in NVMe 1.2.1 we
   want to be able to use reserved requests.

Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:11 -06:00
Christoph Hellwig
7d2e80080d nvme: allow transitioning from NEW to LIVE state
For Fabrics we're not going through an intermediate reset state
(at least for now).

Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:09 -06:00
Dan Williams
0d52c756a6 block: convert to device_add_disk()
For block drivers that specify a parent device, convert them to use
device_add_disk().

This conversion was done with the following semantic patch:

    @@
    struct gendisk *disk;
    expression E;
    @@

    - disk->driverfs_dev = E;
    ...
    - add_disk(disk);
    + device_add_disk(E, disk);

    @@
    struct gendisk *disk;
    expression E1, E2;
    @@

    - disk->driverfs_dev = E1;
    ...
    E2 = disk;
    ...
    - add_disk(E2);
    + device_add_disk(E1, E2);

...plus some manual fixups for a few missed conversions.

Cc: Jens Axboe <axboe@fb.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-27 12:26:08 -07:00
Johannes Thumshirn
a1f447b35b NVMe: Use pci_(request|release)_mem_regions
Now that we do have pci_request_mem_regions() and pci_release_mem_regions()
at hand, use it in the NVMe driver.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: Keith Busch <keith.busch@intel.com>
CC: Jens Axboe <axboe@fb.com>
2016-06-21 17:09:32 -05:00
Christoph Hellwig
f5fa90dc0a nvme: move the workaround for I/O queue-less controllers from PCIe to core
We want to apply this to Fabrics drivers as well, so move it to common
code.

Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-12 07:29:43 -06:00
Christoph Hellwig
7a5abb4b48 nvme: factor out a add nvme_is_write helper
Centralize the check if a given NVMe command reads or writes data.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-12 07:29:43 -06:00
Christoph Hellwig
a229dbf61e nvme: allow for size limitations from transport drivers
Some transport drivers may have a lower transfer size than
the controller. So allow the transport to set it in the
controller max_hw_sectors.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-12 07:29:43 -06:00
Johannes Thumshirn
edb50a5403 NVMe: Only release requested regions
The NVMe driver only requests the PCIe device's memory regions but releases
all possible regions (including eventual I/O regions). This leads to a stale
warning entry in dmesg about freeing non existent resources.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09 14:28:28 -06:00
Sunad Bhandary
47b0e50ac7 NVMe: Fix removal in case of active namespace list scanning method
In case of the active namespace list scanning method, a namespace that
is detached is not removed from the host if it was the last entry in
the list. Fix this by adding a scan to validate namespaces greater than
the value of prev.

This also handles the case of removing namespaces whose value exceed
the device's reported number of namespaces.

Signed-off-by: Sunad Bhandary S <sunad.s@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08 08:48:47 -06:00
Minfei Huang
bd0fc2884c nvme: use UINT_MAX for max discard sectors
It's more elegant to use UINT_MAX to represent the max value of
type unsigned int. So replace the actual value by using this define.

Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 22:23:12 -06:00
Ming Lin
c55a2fd4bb nvme: move nvme_cancel_request() to common code
So it can be used by fabrics driver also.

Signed-off-by: Ming Lin <ming.l@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Keith Busch <keith.bsuch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:43:02 -06:00
Ming Lin
e1958e6534 nvme: update and rename nvme_cancel_io to nvme_cancel_request
nvme_cancel_io is a bit confusing (given the distinction of io/admin),
so rename it to nvme_cancel_request.

And update it a bit to pass in struct nvme_ctrl, so it can be used
by Fabrics driver also.

Signed-off-by: Ming Lin <ming.l@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Keith Busch <keith.bsuch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:43:02 -06:00
Mike Christie
3a5e02ced1 block, drivers: add REQ_OP_FLUSH operation
This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie
c2df40dfb8 drivers: use req op accessor
The req operation REQ_OP is separated from the rq_flag_bits
definition. This converts the block layer drivers to
use req_op to get the op from the request struct.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Nicholas Bellinger
ba36c21b0c nvme/host: Add missing blk_integrity tag_size + flags assignments
While doing recent bring-up of nvme/host with target-core T10-PI,
I noticed /sys/block/nvme*/integrity/device_is_integrity_capable
was false, and /sys/block/nvme*/integrity/tag_size contained
a bogus value.

AFAICT outside of blk_integrity_compare() for DM + MD these
are informational values, but go ahead and add the missing
assignments for nvme/host to match what SCSI does within
sd_dif_config_host() for consistency's sake.

Cc: Keith Busch <keith.busch@intel.com>
Cc: Jay Freyensee <james.p.freyensee@intel.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagi at grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
99466e708d NVMe: Add device ID's with stripe quirk
Adds two Intel controllers that have the "stripe" quirk.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
0ff9d4e1a2 NVMe: Short-cut removal on surprise hot-unplug
This patch adds a new state that when set has the core automatically
kill request queues prior to removing namespaces.

If PCI device is not present at the time the nvme driver's remove is
called, we can kill all IO queues immediately instead of waiting for
the watchdog thread to do that at its polling interval. This improves
scenarios where multiple hot plug events occur at the same time since
it doesn't block the pci enumeration for as long.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
9ec3bb2f99 NVMe: Allow user initiated rescan
This exposes ioctl and sysfs methods a user can invoke to request the
driver rescan a controller and its namespaces. This is less harsh than
doing a controller reset, which temporarilly halts all IO, just to
surface a newly attached namespace.

This is mainly useful for controllers that implement the namespace
management command, but do not support the namespace notify change
asynchronous event notification.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
d011fb3164 NVMe: Reduce driver log spamming
Reduce error logging when no corrective action is required.

Suggessted-by: Chris Petersen <cpetersen@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
921920ab32 NVMe: Unbind driver on failure
Instead of removing the PCI device from the kernel's topology on
controller failure, this patch simply requests unbinding the device
from the driver. This avoids concurrently running pci removal with the
hot plug event, which has been reported to be problematic when multiple
surprise events occur near simultaneously.

The other benefit is that we will have PCI config and memory space
available to poke around for debugging a failed controller, assuming
the device was not physically removed.

The down side occurs if the platform and/or kernel do not support any
type of surprise hot removal. The device will remain visible through
sysfs (and therefore lspci), and some manual work is necessary to get
the logical topology corrected. But if your platform and/or kernel don't
support surprise removal, you probably shouldn't be doing that anyway.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
014a0d609e NVMe: Delete only created queues
Use the online queue count instead of the number of allocated queues. The
controller should just return an invalid queue identifier error to the
commands if a queue wasn't created. While it's not harmful, it's still
not correct.

Reported-by: Saar Gross <saar@annapurnalabs.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Keith Busch
2800b8e7d9 NVMe: Allocate queues only for online cpus
The driver previously requested allocating queues for the total possible
number of CPUs so that blk-mq could rebalance these if CPUs were added
after initialization. The number of hardware contexts can now be changed
at runtime, so we only need to allocate the number of online queues
since we can add more later.

Suggested-by: Jeff Lien <jeff.lien@hgst.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-17 17:14:21 -06:00
Linus Torvalds
24b9f0cf00 Merge branch 'for-4.7/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "On top of the core pull request, this is the drivers pull request for
  this merge window.  This contains:

   - Switch drivers to the new write back cache API, and kill off the
     flush flags.  From me.

   - Kill the discard support for the STEC pci-e flash driver.  It's
     trivially broken, and apparently unmaintained, so it's safer to
     just remove it.  From Jeff Moyer.

   - A set of lightnvm updates from the usual suspects (Matias/Javier,
     and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei
     Tao.

   - A set of updates for NVMe:

        - Turn the controller state management into a proper state
          machine.  From Christoph.

        - Shuffling of code in preparation for NVMe-over-fabrics, also
          from Christoph.

        - Cleanup of the command prep part from Ming Lin.

        - Rewrite of the discard support from Ming Lin.

        - Deadlock fix for namespace removal from Ming Lin.

        - Use the now exported blk-mq tag helper for IO termination.
          From Sagi.

        - Various little fixes from Christoph, Guilherme, Keith, Ming
          Lin, Wang Sheng-Hui.

   - Convert mtip32xx to use the now exported blk-mq tag iter function,
     from Keith"

* 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits)
  lightnvm: reserved space calculation incorrect
  lightnvm: rename nr_pages to nr_ppas on nvm_rq
  lightnvm: add is_cached entry to struct ppa_addr
  lightnvm: expose gennvm_mark_blk to targets
  lightnvm: remove mgt targets on mgt removal
  lightnvm: pass dma address to hardware rather than pointer
  lightnvm: do not assume sequential lun alloc.
  nvme/lightnvm: Log using the ctrl named device
  lightnvm: rename dma helper functions
  lightnvm: enable metadata to be sent to device
  lightnvm: do not free unused metadata on rrpc
  lightnvm: fix out of bound ppa lun id on bb tbl
  lightnvm: refactor set_bb_tbl for accepting ppa list
  lightnvm: move responsibility for bad blk mgmt to target
  lightnvm: make nvm_set_rqd_ppalist() aware of vblks
  lightnvm: remove struct factory_blks
  lightnvm: refactor device ops->get_bb_tbl()
  lightnvm: introduce nvm_for_each_lun_ppa() macro
  lightnvm: refactor dev->online_target to global nvm_targets
  lightnvm: rename nvm_targets to nvm_tgt_type
  ...
2016-05-17 16:03:32 -07:00
Javier González
6d5be9590b lightnvm: rename nr_pages to nr_ppas on nvm_rq
The number of ppas contained on a request is not necessarily the number
of pages that it maps to neither on the target nor on the device side.
In order to avoid confusion, rename nr_pages to nr_ppas since it is what
the variable actually contains.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Arnd Bergmann
45bbd0529e lightnvm: pass dma address to hardware rather than pointer
A recent change to lightnvm added code to pass a kernel pointer
to the hardware, which gcc complained about:

drivers/nvme/host/lightnvm.c: In function 'nvme_nvm_rqtocmd':
drivers/nvme/host/lightnvm.c:472:32: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
  c->ph_rw.metadata = cpu_to_le64(rqd->meta_list);

It looks like this has no way of working anyway, so this changes
the code to pass the dma_address instead. This was most likely
what was intended here. Neither of the two are currently ever
written to, so the effect is the same for now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a34b1eb78e21 ("lightnvm: enable metadata to be sent to device")
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Sagi Grimberg
b86d8d363e nvme/lightnvm: Log using the ctrl named device
Align with the rest of the nvme subsystem.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Javier González
75b8564932 lightnvm: rename dma helper functions
Until now, the dma pool have been exclusively used to allocate the ppa
list being sent to the device. In pblk (upcoming), we use these pools to
allocate metadata too. Thus, we generalize the names of some variables
on the dma helper functions to make the code more readable.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Javier González
003fad376b lightnvm: enable metadata to be sent to device
Enable metadata buffer to be sent to the device through the metadata
field on the physical rw nvme command. The size of the metadata buffer
must follow dev->oob_size * # of PPAs.

Signed-off-by: Javier González <javier@cnexlabs.com>
Updated description.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Matias Bjørling
00ee6cc3b7 lightnvm: refactor set_bb_tbl for accepting ppa list
The set_bb_tbl takes struct nvm_rq and only uses its ppa_list and
nr_pages internally. Instead, make these two variables explicit.
This allows a user to call it without initializing a struct nvm_rq
first.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Matias Bjørling
e11903f5df lightnvm: refactor device ops->get_bb_tbl()
The device ops->get_bb_tbl() takes a callback, that allows the caller
to use its own callback function to update its data structures in the
returning function.

This makes it difficult to send parameters to the callback, and usually
is circumvented by small private structures, that both carry the callers
state and any flags needed to fulfill the update.

Refactor ops->get_bb_tbl() to fill a data buffer with the status of the
blocks returned, and let the user call the callback function manually.
That will provide the necessary flags and data structures and simplify
the logic around ops->get_bb_tbl().

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Matias Bjørling
22e8c9766a lightnvm: move block fold outside of get_bb_tbl()
The get block table command returns a list of blocks and planes
with their associated state. Users, such as gennvm and sysblk,
manages all planes as a single virtual block.

It was therefore  natural to fold the bad block list before it is
returned. However, to allow users, which manages on a per-plane
block level, to also use the interface, the get_bb_tbl interface is
changed to not fold by default and instead let the caller fold if
necessary.

Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06 12:51:10 -06:00
Keith Busch
87c3207781 NVMe: Fix reset/remove race
This fixes a scenario where device is present and being reset, but a
request to unbind the driver occurs.

A previous patch series addressing a device failure removal scenario
flushed reset_work after controller disable to unblock reset_work waiting
on a completion that wouldn't occur. This isn't safe as-is. The broken
scenario can potentially be induced with:

  modprobe nvme && modprobe -r nvme

To fix, the reset work is flushed immediately after setting the controller
removing flag, and any subsequent reset will not proceed with controller
initialization if the flag is set.

The controller status must be polled while active, so the watchdog timer
is also left active until the controller is disabled to cleanup requests
that may be stuck during namespace removal.

[Fixes: ff23a2a15a]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-03 14:00:29 -06:00
Ming Lin
b7b9c22787 nvme: fix nvme_ns_remove() deadlock
On receipt of a namespace attribute changed AER, we acquire the
namespace mutex lock before proceeding to scan and validate the
namespace list. In case of namespace detach/delete command,
nvme_ns_remove function deadlocks trying to acquire the already held
lock.

All callers, except nvme_remove_namespaces(), of nvme_ns_remove()
already held namespaces_mutex. So we can simply fix the deadlock by
not acquiring the mutex in nvme_ns_remove() and acquiring it in
nvme_remove_namespaces().

Reported-by: Sunad Bhandary S <sunad.s@samsung.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimerg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:16:13 -06:00
Ming Lin
0bf77e9dbb nvme: switch to RCU freeing the namespace
Switch to RCU freeing the namespace structure so that
nvme_start_queues, nvme_stop_queues and nvme_kill_queues would
be able to get away with only a RCU read side critical section.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimerg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:16:11 -06:00
Ming Lin
6904242db1 nvme: add helper nvme_cleanup_cmd()
This hides command cleanup into nvme.h and fabrics drivers will
also use it.

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:11:58 -06:00
Christoph Hellwig
f866fc4282 nvme: move AER handling to common code
The transport driver still needs to do the actual submission, but all the
higher level code can be shared.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:09:26 -06:00
Christoph Hellwig
5955be2144 nvme: move namespace scanning to core
Move the scan work item and surrounding code to the common code.  For now
we need a new finish_scan method to allow the PCI driver to set the
irq affinity hints, but I have plans in the works to obsolete this as well.

Note that this moves the namespace scanning from nvme_wq to the system
workqueue, but as we don't rely on namespace scanning to finish from reset
or I/O this should be fine.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:09:24 -06:00
Christoph Hellwig
92911a55d4 nvme: tighten up state check for namespace scanning
We only should be scanning namespaces if the controller is live.  Currently
we call the function just before setting it live, so fix the code up to
move the call to nvme_queue_scan to just below the state change.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:09:23 -06:00
Christoph Hellwig
bb8d261e08 nvme: introduce a controller state machine
Replace the adhoc flags in the PCI driver with a state machine in the
core code.  Based on code from Sagi Grimberg for the Fabrics driver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:09:21 -06:00
Christoph Hellwig
04a934d4c7 nvme: remove the io_incapable method
It's unused since "NVMe: Move error handling to failed reset handler".

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:09:20 -06:00
Wang Sheng-Hui
23bd63ceea NVMe: nvme_core_exit() should do cleanup in the reverse order as nvme_core_init does
nvme_core_init does:
    1) register_blkdev
    2) __register_chrdev
    3) class_create

nvme_core_exit should do cleanup in the reverse order.

Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:05:03 -06:00
Keith Busch
3b24774e1f NVMe: Fix check_flush_dependency warning
If the controller fails and is degraded after a reset, we need to kill
off all requests queues before removing the inaccessble namespaces. This
will prevent del_gendisk from syncing dirty data, which we can't due
from a WQ_MEM_RECLAIM work queue.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02 09:03:06 -06:00
Wang Sheng-Hui
b31356dfde NVMe: small typo in section BLK_DEV_NVME_SCSI of host/Kconfig
"as well as " is miss typed "as well a " in section
"config BLK_DEV_NVME_SCSI"

Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-26 08:31:50 -06:00
Christoph Hellwig
76e3914ae5 nvme: fix cntlid type
Controller IDs in NVMe are unsigned 16-bit types.  In the Fabrics driver we
actually pass ctrl->id by reference, so we need it to have the correct type.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-26 08:31:22 -06:00
Keith Busch
a5229050b6 NVMe: Always use MSI/MSI-x interrupts
Multiple users have reported device initialization failure due the driver
not receiving legacy PCI interrupts. This is not unique to any particular
controller, but has been observed on multiple platforms.

There have been no issues reported or observed when with message signaled
interrupts, so this patch attempts to use MSI-x during initialization,
falling back to MSI. If that fails, legacy would become the default.

The setup_io_queues error handling had to change as a result: the admin
queue's msix_entry used to be initialized to the legacy IRQ. The case
where nr_io_queues is 0 would fail request_irq when setting up the admin
queue's interrupt since re-enabling MSI-x fails with 0 vectors, leaving
the admin queue's msix_entry invalid. Instead, return success immediately.

Reported-by: Tim Muhlemmer <muhlemmer@gmail.com>
Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-14 14:04:50 -06:00
Guilherme G. Piccoli
c875a7093f nvme: Avoid reset work on watchdog timer function during error recovery
This patch adds a check on nvme_watchdog_timer() function to avoid the
call to reset_work() when an error recovery process is ongoing on
controller. The check is made by looking at pci_channel_offline()
result.

If we don't check for this on nvme_watchdog_timer(), error recovery
mechanism can't recover well, because reset_work() won't be able to
do its job (since we're in the middle of an error) and so the
controller is removed from the system before error recovery mechanism
can perform slot reset (which would allow the adapter to recover).

In this patch we also have split the huge condition expression on
nvme_watchdog_timer() by introducing an auxiliary function to help
make the code more readable.

Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-13 08:15:39 -06:00
Jens Axboe
7e19793096 NVMe: silence warning about unused 'dev'
Depending on options, we might not be using dev in nvme_cancel_io():

drivers/nvme/host/pci.c: In function ‘nvme_cancel_io’:
drivers/nvme/host/pci.c:970:19: warning: unused variable ‘dev’ [-Wunused-variable]
  struct nvme_dev *dev = data;
                   ^

So get rid of it, and just cast for the dev_dbg_ratelimited() call.

Fixes: 82b4552b91 ("nvme: Use blk-mq helper for IO termination")
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 16:11:11 -06:00
Jens Axboe
7c88cb00f2 NVMe: switch to using blk_queue_write_cache()
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 16:00:39 -06:00
Sagi Grimberg
82b4552b91 nvme: Use blk-mq helper for IO termination
blk-mq offers a tagset iterator so let's use that
instead of using nvme_clear_queues.

Note, we changed nvme_queue_cancel_ios name to nvme_cancel_io
as there is no concept of a queue now in this function (we
also lost the print).

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 15:07:15 -06:00
Keith Busch
21f033f7c7 NVMe: Skip async events for degraded controllers
If the controller is degraded, the driver should stay out of the way so
the user can recover the drive. This patch skips driver initiated async
event requests when the drive is in this state.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 13:44:00 -06:00
Ming Lin
8093f7ca73 nvme: add helper nvme_setup_cmd()
This moves nvme_setup_{flush,discard,rw} calls into a common
nvme_setup_cmd() helper. So we can eventually hide all the command
setup in the core module and don't even need to update the fabrics
drivers for any specific command type.

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 13:44:00 -06:00
Ming Lin
03b5929ebb nvme: rewrite discard support
This rewrites nvme_setup_discard() with blk_add_request_payload().
It allocates only the necessary amount(16 bytes) for the payload.

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 13:44:00 -06:00
Ming Lin
58b4560275 nvme: add helper nvme_map_len()
The helper returns the number of bytes that need to be mapped
using PRPs/SGL entries.

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 13:44:00 -06:00
Ming Lin
2e39e0f608 nvme: add missing lock nesting notation
When unloading driver, nvme_disable_io_queues() calls nvme_delete_queue()
that sends nvme_admin_delete_cq command to admin sq. So when the command
completed, the lock acquired by nvme_irq() actually belongs to admin queue.

While the lock that nvme_del_cq_end() trying to acquire belongs to io queue.
So it will not deadlock.

This patch adds lock nesting notation to fix following report.

[  109.840952] =============================================
[  109.846379] [ INFO: possible recursive locking detected ]
[  109.851806] 4.5.0+ #180 Tainted: G            E
[  109.856533] ---------------------------------------------
[  109.861958] swapper/0/0 is trying to acquire lock:
[  109.866771]  (&(&nvmeq->q_lock)->rlock){-.....}, at: [<ffffffffc0820bc6>] nvme_del_cq_end+0x26/0x70 [nvme]
[  109.876535]
[  109.876535] but task is already holding lock:
[  109.882398]  (&(&nvmeq->q_lock)->rlock){-.....}, at: [<ffffffffc0820c2b>] nvme_irq+0x1b/0x50 [nvme]
[  109.891547]
[  109.891547] other info that might help us debug this:
[  109.898107]  Possible unsafe locking scenario:
[  109.898107]
[  109.904056]        CPU0
[  109.906515]        ----
[  109.908974]   lock(&(&nvmeq->q_lock)->rlock);
[  109.913381]   lock(&(&nvmeq->q_lock)->rlock);
[  109.917787]
[  109.917787]  *** DEADLOCK ***
[  109.917787]
[  109.923738]  May be due to missing lock nesting notation
[  109.923738]
[  109.930558] 1 lock held by swapper/0/0:
[  109.934413]  #0:  (&(&nvmeq->q_lock)->rlock){-.....}, at: [<ffffffffc0820c2b>] nvme_irq+0x1b/0x50 [nvme]
[  109.944010]
[  109.944010] stack backtrace:
[  109.948389] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G            E   4.5.0+ #180
[  109.955734] Hardware name: Dell Inc. OptiPlex 7010/0YXT71, BIOS A15 08/12/2013
[  109.962989]  0000000000000000 ffff88011e203c38 ffffffff81383d9c ffffffff81c13540
[  109.970478]  ffffffff826711d0 ffff88011e203ce8 ffffffff810bb429 0000000000000046
[  109.977964]  0000000000000046 0000000000000000 0000000000b2e597 ffffffff81f4cb00
[  109.985453] Call Trace:
[  109.987911]  <IRQ>  [<ffffffff81383d9c>] dump_stack+0x85/0xc9
[  109.993711]  [<ffffffff810bb429>] __lock_acquire+0x19b9/0x1c60
[  109.999575]  [<ffffffff810b6d1d>] ? trace_hardirqs_off+0xd/0x10
[  110.005524]  [<ffffffff810b386d>] ? complete+0x3d/0x50
[  110.010688]  [<ffffffff810bb760>] lock_acquire+0x90/0xf0
[  110.016029]  [<ffffffffc0820bc6>] ? nvme_del_cq_end+0x26/0x70 [nvme]
[  110.022418]  [<ffffffff81772afb>] _raw_spin_lock_irqsave+0x4b/0x60
[  110.028632]  [<ffffffffc0820bc6>] ? nvme_del_cq_end+0x26/0x70 [nvme]
[  110.035019]  [<ffffffffc0820bc6>] nvme_del_cq_end+0x26/0x70 [nvme]
[  110.041232]  [<ffffffff8135b485>] blk_mq_end_request+0x35/0x60
[  110.047095]  [<ffffffffc0821ad8>] nvme_complete_rq+0x68/0x190 [nvme]
[  110.053481]  [<ffffffff8135b53f>] __blk_mq_complete_request+0x8f/0x130
[  110.060043]  [<ffffffff8135b611>] blk_mq_complete_request+0x31/0x40
[  110.066343]  [<ffffffffc08209e3>] __nvme_process_cq+0x83/0x240 [nvme]
[  110.072818]  [<ffffffffc0820c35>] nvme_irq+0x25/0x50 [nvme]
[  110.078419]  [<ffffffff810cdb66>] handle_irq_event_percpu+0x36/0x110
[  110.084804]  [<ffffffff810cdc77>] handle_irq_event+0x37/0x60
[  110.090491]  [<ffffffff810d0ea3>] handle_edge_irq+0x93/0x150
[  110.096180]  [<ffffffff81012306>] handle_irq+0xa6/0x130
[  110.101431]  [<ffffffff81011abe>] do_IRQ+0x5e/0x120
[  110.106333]  [<ffffffff8177384c>] common_interrupt+0x8c/0x8c

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 13:44:00 -06:00
Keith Busch
788e15abbb NVMe: Always use MSI/MSI-x interrupts
Multiple users have reported device initialization failure due the driver
not receiving legacy PCI interrupts. This is not unique to any particular
controller, but has been observed on multiple platforms.

There have been no issues reported or observed when with message signaled
interrupts, so this patch attempts to use MSI-x during initialization,
falling back to MSI. If that fails, legacy would become the default.

The setup_io_queues error handling had to change as a result: the admin
queue's msix_entry used to be initialized to the legacy IRQ. The case
where nr_io_queues is 0 would fail request_irq when setting up the admin
queue's interrupt since re-enabling MSI-x fails with 0 vectors, leaving
the admin queue's msix_entry invalid. Instead, return success immediately.

Reported-by: Tim Muhlemmer <muhlemmer@gmail.com>
Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12 13:44:00 -06:00
Keith Busch
9bf2b972af NVMe: Fix reset/remove race
This fixes a scenario where device is present and being reset, but a
request to unbind the driver occurs.

A previous patch series addressing a device failure removal scenario
flushed reset_work after controller disable to unblock reset_work waiting
on a completion that wouldn't occur. This isn't safe as-is. The broken
scenario can potentially be induced with:

  modprobe nvme && modprobe -r nvme

To fix, the reset work is flushed immediately after setting the controller
removing flag, and any subsequent reset will not proceed with controller
initialization if the flag is set.

The controller status must be polled while active, so the watchdog timer
is also left active until the controller is disabled to cleanup requests
that may be stuck during namespace removal.

[Fixes: ff23a2a15a]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-11 10:00:04 -06:00
Marta Rybczynska
d783e0bd02 nvme: avoid cqe corruption when update at the same time as read
Make sure the CQE phase (validity) is read before the rest of the
structure. The phase bit is the highest address and the CQE
read will happen on most platforms from lower to upper addresses
and will be done by multiple non-atomic loads. If the structure
is updated by PCI during the reads from the processor, the
processor may get a corrupted copy.

The addition of the new nvme_cqe_valid function that verifies
the validity bit also allows refactoring of the other CQE read
sequences.

Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-22 10:27:29 -06:00
Matias Bjorling
9f86726843 nvme: lightnvm: return ppa completion status
PPAs sent to device is separately acknowledge in a 64bit status
variable. The status is stored in DW0 and DW1 of the completion queue
entry. Store this status inside the nvm_rq for further processing.

This can later be used to implement retry techniques for failed writes
and reads.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18 18:10:38 -07:00
Linus Torvalds
237045fc3c Merge branch 'for-4.6/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for this merge window.  It sits
  on top of for-4.6/core, that was just sent out.

  This contains:

   - A set of fixes for lightnvm.  One from Alan, fixing an overflow,
     and the rest from the usual suspects, Javier and Matias.

   - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
     for correct usage of the signed 64-bit divider.

   - A set of bug fixes for the Micron mtip32xx, from Asai.

   - A fix for the brd discard handling from Bart.

   - Update the maintainers entry for cciss, since that hardware has
     transferred ownership.

   - Three bug fixes for bcache from Eric Wheeler.

   - Set of fixes for xen-blk{back,front} from Jan and Konrad.

   - Removal of the cpqarray driver.  It has been disabled in Kconfig
     since 2013, and we were initially scheduled to remove it in 3.15.

   - Various updates and fixes for NVMe, with the most important being:

        - Removal of the per-device NVMe thread, replacing that with a
          watchdog timer instead. From Christoph.

        - Exposing the namespace WWID through sysfs, from Keith.

        - Set of cleanups from Ming Lin.

        - Logging the controller device name instead of the underlying
          PCI device name, from Sagi.

        - And a bunch of fixes and optimizations from the usual suspects
          in this area"

* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
  NVMe: Expose ns wwid through single sysfs entry
  drivers:block: cpqarray clean up
  brd: Fix discard request processing
  cpqarray: remove it from the kernel
  cciss: update MAINTAINERS
  NVMe: Remove unused sq_head read in completion path
  bcache: fix cache_set_flush() NULL pointer dereference on OOM
  bcache: cleaned up error handling around register_cache()
  bcache: fix race of writeback thread starting before complete initialization
  NVMe: Create discard zero quirk white list
  nbd: use correct div_s64 helper
  mtip32xx: remove unneeded variable in mtip_cmd_timeout()
  lightnvm: generalize rrpc ppa calculations
  lightnvm: remove struct nvm_dev->total_blocks
  lightnvm: rename ->nr_pages to ->nr_sects
  lightnvm: update closed list outside of intr context
  xen/blback: Fit the important information of the thread in 17 characters
  lightnvm: fold get bb tbl when using dual/quad plane mode
  lightnvm: fix up nonsensical configure overrun checking
  xen-blkback: advertise indirect segment support earlier
  ...
2016-03-18 17:13:31 -07:00
Keith Busch
118472ab85 NVMe: Expose ns wwid through single sysfs entry
The method to uniquely identify a namespace depends on the controller's
specification revision level and implemented capabilities. This patch
has the driver figure this out and exports the unique string through a
single 'wwid' attribute so the user doesn't have this burden.

The longest namespace unique identifier is used if available. If not
available, the driver will concat the controller's vendor, serial,
and model with the namespace ID. The specification provides this as a
unique indentifier.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-16 07:46:25 -07:00
Jon Derrick
48c7823f42 NVMe: Remove unused sq_head read in completion path
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-08 15:01:06 -07:00
Keith Busch
08095e7078 NVMe: Create discard zero quirk white list
The NVMe specification does not require discarded blocks return zeroes on
read, but provides that behavior as a possibility. Some applications more
efficiently use an SSD if reads on discarded blocks were deterministically
zero, based on the "discard_zeroes_data" queue attribute.

There is no specification defined way to determine device behavior on
discarded blocks, so the driver always left the queue setting disabled. We
can only know behavior based on individual device models, so this patch
adds a flag to the NVMe "quirk" list that vendors may set if they know
their controller works that way. The patch also sets the new flag for one
such known device.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Suggested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-08 08:32:40 -07:00
Matias Bjørling
d5bdec8ddb lightnvm: fold get bb tbl when using dual/quad plane mode
When the media manager runs in dual or quad plane mode, lightnvm
abstracts away plane specific commands. This poses a problem for
get bad block table, as it reports bad blocks per plane, making the
table either two or four times bigger than expected. Fold the bad block
list before returning.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:45:53 -07:00
Christoph Hellwig
45686b6198 nvme: fix max_segments integer truncation
The block layer uses an unsigned short for max_segments.  The way we
calculate the value for NVMe tends to generate very large 32-bit values,
which after integer truncation may lead to a zero value instead of
the desired outcome.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jeff Lien <Jeff.Lien@hgst.com>
Tested-by: Jeff Lien <Jeff.Lien@hgst.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:43:10 -07:00
Christoph Hellwig
da35825d9a nvme: set queue limits for the admin queue
Factor out a helper to set all the device specific queue limits and apply
them to the admin queue in addition to the I/O queues.  Without this the
command size on the admin queue is arbitrarily low, and the missing
other limitations are just minefields waiting for victims.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jeff Lien <Jeff.Lien@hgst.com>
Tested-by: Jeff Lien <Jeff.Lien@hgst.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:50 -07:00
Keith Busch
e9fc63d682 NVMe: Fix 0-length integrity payload
A user could send a passthrough IO command with a metadata pointer to a
namespace without metadata. With metadata length of 0, kmalloc returns
ZERO_SIZE_PTR. Since that is not NULL, the driver would have set this as
the bio's integrity payload, which causes an access fault on completion.

This patch ignores the users metadata buffer if the namespace format
does not support separate metadata.

Reported-by: Stephen Bates <stephen.bates@microsemi.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:50 -07:00
Keith Busch
63088ec7c8 NVMe: Don't allow unsupported flags
The command flags can change the meaning of other fields in the command
that the driver is not prepared to handle. Specifically, the user could
passthrough an SGL flag, causing the controller to misinterpret the PRP
list the driver created, potentially corrupting memory or data.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:50 -07:00
Keith Busch
69d9a99c25 NVMe: Move error handling to failed reset handler
This moves failed queue handling out of the namespace removal path and
into the reset failure path, fixing a hanging condition if the controller
fails or link down during del_gendisk. Previously the driver had to see
the controller as degraded prior to calling del_gendisk to setup the
queues to fail. But, if the controller happened to fail after this,
there was no task to end outstanding requests.

On failure, all namespace states are set to dead. This has capacity
revalidate to 0, and ends all new requests with error status.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:50 -07:00
Keith Busch
f58944e265 NVMe: Simplify device reset failure
A reset failure schedules the device to unbind from the driver through
the pci driver's remove. This cleans up all intialization, so there is
no need to duplicate the potentially racy cleanup.

To help understand why a reset failed, the status is logged with the
existing warning message.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:49 -07:00
Keith Busch
646017a612 NVMe: Fix namespace removal deadlock
This patch makes nvme namespace removal lockless. It is up to the caller
to ensure no active namespace scanning is occuring. To ensure no scan
work occurs, the nvme pci driver adds a removing state to the controller
device to avoid queueing scan work during removal. The work is flushed
after setting the state, so no new scan work can be queued.

The lockless removal allows the driver to cleanup a namespace
request_queue if the controller fails during removal. Previously this
could deadlock trying to acquire the namespace mutex in order to handle
such events.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:49 -07:00
Keith Busch
075790ebba NVMe: Use IDA for namespace disk naming
A namespace may be detached from a controller, but a user may be holding
a reference to it. Attaching a new namespace with the same NSID will create
duplicate names when using the NSID to name the disk.

This patch uses an IDA that is released only when the last reference is
released instead of using the namespace ID.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:49 -07:00
Keith Busch
b00a726a9f NVMe: Don't unmap controller registers on reset
Unmapping the registers on reset or shutdown is not necessary. Keeping
the mapping simplifies reset handling.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:42:49 -07:00
Ming Lin
931e1c2204 nvme: expose cntlid in sysfs
For NVMe over Fabrics, the cntlid will be used by systemd/udev to
create link to the device, for example,

/dev/disk/by-path/<fabrics-info>-<cntlid>-<namespace> -> /dev/nvme0n1

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-29 12:31:27 -07:00
Christoph Hellwig
1cb3cce5eb nvme: return the whole CQE through the request passthrough interface
Both LighNVM and NVMe over Fabrics need to look at more than just the
status and result field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bj?rling <m@bjorling.me>
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-29 08:47:17 -07:00
Christoph Hellwig
2d55cd5f51 nvme: replace the kthread with a per-device watchdog timer
The only work left in the kthread is the periodic health check for each
controller.  There is no need to run this from process context or keep
a thread context around for it, so replace it with a simpler timer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-29 08:47:16 -07:00
Christoph Hellwig
79f2b358c9 nvme: don't poll the CQ from the kthread
There is no reason to do unconditional polling of CQs per the NVMe
spec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-29 08:47:14 -07:00
Christoph Hellwig
9396dec916 nvme: use a work item to submit async event requests
Use a dedicated work item to submit async event requests instead of the
global kthread.  This simplifies the code and reduces the latencies to
resubmit a request once an even notification happened.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-29 08:47:13 -07:00
Keith Busch
f8e68a7c9a NVMe: Rate limit nvme IO warnings
We don't need to spam the kernel logs with thousands of IO cancelling
messages. We can infer all IO's are being cancelled with fewer, or
even none at all. This patch rate limits the message and uses the debug
log level as it is mainly used for testing purposes.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:10:31 -07:00
Keith Busch
ff23a2a15a NVMe: Poll device while still active during remove
A device failure or link down wouldn't have been detected during namespace
removal. This patch keeps the device in the list for polling so that the
thread may see such failure and initiate a reset. The device is removed
from the list after disable, so we can safely flush the reset work as
it can't be requeued when disable completes.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:10:16 -07:00
Keith Busch
ae1fba2001 NVMe: Requeue requests on suspended queues
It's possible a request may get to the driver after the nvme queue was
disabled. This has the request requeue if that happens.

Note the request is still "started" by the driver, but requeuing will
clear the start state for timeout handling.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:10:08 -07:00
Keith Busch
ef2d4615c5 NVMe: Allow request merges
It is generally more efficient to submit larger IO.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-11 13:14:03 -07:00
Keith Busch
4f76d0e498 NVMe: Fix io incapable return values
The function returns true when the controller can't handle IO.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-11 13:14:02 -07:00
Ming Lin
576d55d625 nvme: split pci module out of core module
NVMe over Fabrics drivers are going to reuse the core,
so splits nvme.ko into 2 modules:

nvme-core.ko: the core part
nvme.ko: the PCI driver

Export symbols from nvme-core.ko.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-10 14:22:38 -07:00
Ming Lin
9f2482b91b nvme: split dev_list_lock
Split dev_list_lock into one in the core and one in the PCI driver.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-10 14:22:36 -07:00
Ming Lin
ba0ba7d3e5 nvme: move timeout variables to core.c
These variables are used by PCI driver and will also be used in the
forthcoming NVMe over Fabrics drivers.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-10 14:22:34 -07:00
Sagi Grimberg
e439bb12e7 nvme/host: reference the fabric module for each bdev open callout
We don't want to be able to unload the fabric driver when we have
openened referenced to our namespaces. Thus, for each nvme_open we
take a reference on the fabric driver and put it in nvme_release.
This behavior is consistent with the scsi model.

This resolves the panic when unloading a fabric module with
mpath holders.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ian Bakshan <ianb@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-10 14:22:32 -07:00
Sagi Grimberg
1b3c47c182 nvme: Log the ctrl device name instead of the underlying pci device name
Having the ctrl name "nvmeX" seems much more friendly than
the underlying device name. Also, with other nvme transports
such as the soon to come nvme-loop we don't have an underlying
device so it doesn't makes sense to make up one.

In order to help matching an instance name to a pci function,
we add a info print in nvme_probe.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Keith Busch <keith.busch@intel.com>

Manually fixed up the hunk in nvme_cancel_queue_ios().

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-10 08:51:15 -07:00
Christoph Hellwig
f4f0f63e6f nvme: fix drvdata setup for the nvme device
Pass the right private data to device_create_with_groups from the
beginning, and remove the superflous call to dev_set_drvdata.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-09 12:44:03 -07:00
Keith Busch
949928c1c7 NVMe: Fix possible queue use after freed
This notifies blk-mq when the tag set contains a different number of
queues prior to freeing unused ones that the request queue points to.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-09 12:42:35 -07:00
Christoph Hellwig
21d147880e nvme: fix Kconfig description for BLK_DEV_NVME_SCSI
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-09 10:21:22 -07:00
Matias Bjørling
6dde1d6c90 lightnvm: check overflow and correct mlc pairs
The specification currently limits the number of MLC pairs to 886. Make
sure that a device is unable to be instantiate if more is configured.

Also, previously the patch had the wrong math for copying MLC pairs, as
it only copied half of the actual entries.

Fixes: ca5927e7ab "lightnvm: introduce mlc lower page table mappings"
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04 09:19:45 -07:00
Linus Torvalds
3e1e21c7bf Merge branch 'for-4.5/nvme' of git://git.kernel.dk/linux-block
Pull NVMe updates from Jens Axboe:
 "Last branch for this series is the nvme changes.  It's in a separate
  branch to avoid splitting too much between core and NVMe changes,
  since NVMe is still helping drive some blk-mq changes.  That said, not
  a huge amount of core changes in here.  The grunt of the work is the
  continued split of the code"

* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
  uapi: update install list after nvme.h rename
  NVMe: Export NVMe attributes to sysfs group
  NVMe: Shutdown controller only for power-off
  NVMe: IO queue deletion re-write
  NVMe: Remove queue freezing on resets
  NVMe: Use a retryable error code on reset
  NVMe: Fix admin queue ring wrap
  nvme: make SG_IO support optional
  nvme: fixes for NVME_IOCTL_IO_CMD on the char device
  nvme: synchronize access to ctrl->namespaces
  nvme: Move nvme_freeze/unfreeze_queues to nvme core
  PCI/AER: include header file
  NVMe: Export namespace attributes to sysfs
  NVMe: Add pci error handlers
  block: remove REQ_NO_TIMEOUT flag
  nvme: merge iod and cmd_info
  nvme: meta_sg doesn't have to be an array
  nvme: properly free resources for cancelled command
  nvme: simplify completion handling
  nvme: special case AEN requests
  ...
2016-01-21 19:58:02 -08:00
Linus Torvalds
0a13daedf7 Merge branch 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block
Pull lightnvm fixes and updates from Jens Axboe:
 "This should have been part of the drivers branch, but it arrived a bit
  late and wasn't based on the official core block driver branch.  So
  they got a small scolding, but got a pass since it's still new.  Hence
  it's in a separate branch.

  This is mostly pure fixes, contained to lightnvm/, and minor feature
  additions"

* 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block: (26 commits)
  lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM
  lightnvm: introduce factory reset
  lightnvm: use system block for mm initialization
  lightnvm: introduce ioctl to initialize device
  lightnvm: core on-disk initialization
  lightnvm: introduce mlc lower page table mappings
  lightnvm: add mccap support
  lightnvm: manage open and closed blocks separately
  lightnvm: fix missing grown bad block type
  lightnvm: reference rrpc lun in rrpc block
  lightnvm: introduce nvm_submit_ppa
  lightnvm: move rq->error to nvm_rq->error
  lightnvm: support multiple ppas in nvm_erase_ppa
  lightnvm: move the pages per block check out of the loop
  lightnvm: sectors first in ppa list
  lightnvm: fix locking and mempool in rrpc_lun_gc
  lightnvm: put block back to gc list on its reclaim fail
  lightnvm: check bi_error in gc
  lightnvm: return the get_bb_tbl return value
  lightnvm: refactor end_io functions for sync
  ...
2016-01-21 19:01:55 -08:00
Linus Torvalds
7c24d9f3b2 Merge branch 'for-4.5/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "We don't have a lot of core changes this time around, it's mostly in
  drivers, which will come in a subsequent pull.

  The cores changes include:

   - blk-mq
        - Prep patch from Christoph, changing blk_mq_alloc_request() to
          take flags instead of just using gfp_t for sleep/nosleep.
        - Doc patch from me, clarifying the difference between legacy
          and blk-mq for timer usage.
        - Fixes from Raghavendra for memory-less numa nodes, and a reuse
          of CPU masks.

   - Cleanup from Geliang Tang, using offset_in_page() instead of open
     coding it.

   - From Ilya, rename request_queue slab to it reflects what it holds,
     and a fix for proper use of bdgrab/put.

   - A real fix for the split across stripe boundaries from Keith.  We
     yanked a broken version of this from 4.4-rc final, this one works.

   - From Mike Krinkin, emit a trace message when we split.

   - From Wei Tang, two small cleanups, not explicitly clearing memory
     that is already cleared"

* 'for-4.5/core' of git://git.kernel.dk/linux-block:
  block: use bd{grab,put}() instead of open-coding
  block: split bios to max possible length
  block: add call to split trace point
  blk-mq: Avoid memoryless numa node encoded in hctx numa_node
  blk-mq: Reuse hardware context cpumask for tags
  blk-mq: add a flags parameter to blk_mq_alloc_request
  Revert "blk-flush: Queue through IO scheduler when flush not required"
  block: clarify blk_add_timer() use case for blk-mq
  bio: use offset_in_page macro
  block: do not initialise statics to 0 or NULL
  block: do not initialise globals to 0 or NULL
  block: rename request_queue slab cache
2016-01-19 15:03:34 -08:00
Keith Busch
779ff75617 NVMe: Export NVMe attributes to sysfs group
Adds all controller information to attribute list exposed to sysfs, and
appends the reset_controller attribute to it. The nvme device is created
with this attribute list, so driver no long manages its attributes.

Reported-by: Sujith Pandel <sujithpshankar@gmail.com>
Cc: Sujith Pandel <sujithpshankar@ gmail.com>
Cc: David Milburn <dmilburn@redhat.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-12 15:11:54 -07:00
Keith Busch
a5cdb68c2c NVMe: Shutdown controller only for power-off
We don't need to shutdown a controller for a reset. A controller in a
shutdown state may take longer to become ready than one that was simply
disabled. This patch has the driver shut down a controller only if the
device is about to be powered off or being removed. When taking the
controller down for a reset reason, the controller will be disabled
instead.

Function names have been updated in this patch to reflect their changed
semantics.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-12 14:47:59 -07:00
Keith Busch
db3cbfff5b NVMe: IO queue deletion re-write
The nvme driver deletes IO queues asynchronously since this operation
may potentially take an undesirable amount of time with a large number
of queues if done serially.

The driver used to manage coordinating asynchronous deletions. This
patch simplifies that by leveraging the block layer rather than using
kthread workers and chaining more complicated callbacks.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-12 14:47:56 -07:00
Keith Busch
25646264e1 NVMe: Remove queue freezing on resets
NVMe submits all commands through the block layer now. This means we
can let requests queue at the blk-mq hardware context since there is no
path that bypasses this anymore so we don't need to freeze the queues
anymore. The driver can simply stop the h/w queues from running during
a reset instead.

This also fixes a WARN in percpu_ref_reinit when the queue was unfrozen
with requeued requests.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-12 13:33:36 -07:00
Keith Busch
1d49c38c48 NVMe: Use a retryable error code on reset
A negative status has the "do not retry" bit set, which makes it not
retryable.  Use a fake status that can potentially be retried on reset.

An aborted command's status is overridden by the timeout handler so
that it won't be retried, which is necessary to keep initialization from
getting into a reset loop.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-12 13:33:35 -07:00