Commit Graph

178 Commits

Author SHA1 Message Date
Sagi Grimberg
75862c7232 nvme-rdma: centralize admin/io queue teardown sequence
We follow the same queue teardown sequence in delete, reset and error
recovery. Centralize the logic.  This patch does not change any
functionality.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-24 15:55:50 +02:00
Sagi Grimberg
c66e2998c8 nvme-rdma: centralize controller setup sequence
Centralize controller sequence to a single routine that correctly cleans
up after failures instead of having multiple apperances in several flows
(create, reset, reconnect).

One thing that we also gain here are the sanity/boundary checks also
when connecting back to a dynamic controller.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-24 15:55:49 +02:00
Sagi Grimberg
90140624e8 nvme-rdma: unquiesce queues when deleting the controller
If the controller is going away, we need to unquiesce the IO queues so
that all pending request can fail gracefully before moving forward with
controller deletion. Do that before we destroy the IO queues so
blk_cleanup_queue won't block in freeze.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-24 15:55:49 +02:00
Gustavo A. R. Silva
249090f901 nvme-rdma: mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-24 15:55:48 +02:00
Sagi Grimberg
59e29ce66b nvme: cache struct nvme_ctrl reference to struct nvme_request
We will need to reference the controller in the setup and completion
time for tracing and future traffic based keep alive support.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-23 09:35:18 +02:00
Steve Wise
64a741c1ea nvme-rdma: support up to 4 segments of inline data
Allow up to 4 segments of inline data for NVMF WRITE operations. This
reduces latency for small WRITEs by removing the need for the target to
issue a READ WR for IB, or a REG_MR + READ WR chain for iWarp.

Also cap the inline segments used based on the limitations of the
device.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-23 09:35:15 +02:00
Sagi Grimberg
682630f00a nvme-rdma: fix possible double free of controller async event buffer
If reconnect/reset failed where the controller async event buffer
was freed, we might end up freeing it again as we call
nvme_rdma_destroy_admin_queue again in the remove path. Given that
the sequence is guaranteed to serialize by .ctrl_stop, we simply
set ctrl->async_event_sqe.data to NULL and don't free it in future
visits.

Reported-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-28 16:29:54 +02:00
Sagi Grimberg
5e77d61cbc nvme-rdma: don't override opts->queue_size
That is user argument, and theoretically controller limits can change
over time (over reconnects/resets).  Instead, use the sqsize controller
attribute to check queue depth boundaries and use it to the tagset
allocation.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20 14:20:51 +02:00
Israel Rukshin
c947657b15 nvme-rdma: Fix command completion race at error recovery
The race is between completing the request at error recovery work and
rdma completions.  If we cancel the request before getting the good
rdma completion we get a NULL deref of the request MR at
nvme_rdma_process_nvme_rsp().

When Canceling the request we return its mr to the mr pool (set mr to
NULL) and also unmap its data.  Canceling the requests while the rdma
queues are active is not safe.  Because rdma queues are active and we
get good rdma completions that can use the mr pointer which may be NULL.
Completing the request too soon may lead also to performing DMA to/from
user buffers which might have been already unmapped.

The commit fixes the race by draining the QP before starting the abort
commands mechanism.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20 14:20:51 +02:00
Sagi Grimberg
94e42213cc nvme-rdma: fix possible free of a non-allocated async event buffer
If nvme_rdma_configure_admin_queue fails before we allocated
the async event buffer, we will falsly free it because
nvme_rdma_free_queue is freeing it. Fix it by allocating the buffer right
after nvme_rdma_alloc_queue and free it right before nvme_rdma_queue_free
to maintain orderly reverse cleanup sequence.

Reported-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20 14:20:28 +02:00
Sagi Grimberg
3d0641015b nvme-rdma: fix possible double free condition when failing to create a controller
Failures after nvme_init_ctrl will defer resource cleanups to .free_ctrl
when the reference is released, hence we should not free the controller
queues for these failures.

Fix that by moving controller queues allocation before controller
initialization and correctly freeing them for failures before
initialization and skip them for failures after initialization.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20 14:20:10 +02:00
Christoph Hellwig
3bc32bb118 nvme-fabrics: refactor queue ready check
Move the is_connected check to the fibre channel transport, as it has no
meaning for other transports.  To facilitate this split out a new
nvmf_fail_nonready_command helper that is called by the transport when
it is asked to handle a command on a queue that is not ready.

Also avoid a function call for the queue live fast path by inlining
the check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
2018-06-15 11:21:00 +02:00
Max Gurtovoy
94423a8f89 nvme-rdma: fix error flow during mapping request data
After dma mapping the sgl, we map the sgl to nvme sgl descriptor. In case
of failure during the last mapping we never dma unmap the sgl.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-11 16:17:58 +02:00
Steve Wise
d4c68c7a8e nvme-rdma: correctly check for target keyed sgl support
The code was checking bit 20 instead of bit 2.  Also fixed the log entry.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-08 12:51:10 -06:00
Jens Axboe
b7405176b5 Merge branch 'nvme-4.18-2' of git://git.infradead.org/nvme into for-4.18/block
Pull NVMe changes from Christoph:

"Here is the current batch of nvme updates for 4.18, we have a few more
 patches in the queue, but I'd like to get this pile into your tree
 and linux-next ASAP.

 The biggest item is support for file-backed namespaces in the NVMe
 target from Chaitanya, in addition to that we mostly small fixes from
 all the usual suspects."

* 'nvme-4.18-2' of git://git.infradead.org/nvme:
  nvme: fixup memory leak in nvme_init_identify()
  nvme: fix KASAN warning when parsing host nqn
  nvmet-loop: use nr_phys_segments when map rq to sgl
  nvmet-fc: increase LS buffer count per fc port
  nvmet: add simple file backed ns support
  nvmet: remove duplicate NULL initialization for req->ns
  nvmet: make a few error messages more generic
  nvme-fabrics: allow duplicate connections to the discovery controller
  nvme-fabrics: centralize discovery controller defaults
  nvme-fabrics: remove unnecessary controller subnqn validation
  nvme-fc: remove setting DNR on exception conditions
  nvme-rdma: stop admin queue before freeing it
  nvme-pci: Fix AER reset handling
  nvme-pci: set nvmeq->cq_vector after alloc cq/sq
  nvme: host: core: fix precedence of ternary operator
  nvme: fix lockdep warning in nvme_mpath_clear_current_path
2018-05-29 12:56:20 -06:00
Christoph Hellwig
db8c48e4b2 nvme: return BLK_EH_DONE from ->timeout
NVMe always completes the request before returning from ->timeout, either
by polling for it, or by disabling the controller.  Return BLK_EH_DONE so
that the block layer doesn't even try to complete it again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29 08:59:21 -06:00
Jianchao Wang
2e050f00a0 nvme-rdma: stop admin queue before freeing it
For any failure after nvme_rdma_start_queue in
nvme_rdma_configure_admin_queue, the admin queue will be freed with the
NVME_RDMA_Q_LIVE flag still set.  Once nvme_rdma_stop_queue is invoked,
that will cause a use-after-free.
BUG: KASAN: use-after-free in rdma_disconnect+0x1f/0xe0 [rdma_cm]

To fix it, call nvme_rdma_stop_queue for all the failed cases after
nvme_rdma_start_queue.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25 16:50:12 +02:00
James Smart
bb06ec3145 nvme: expand nvmf_check_if_ready checks
The nvmf_check_if_ready() checks that were added are very simplistic.
As such, the routine allows a lot of cases to fail ios during windows
of reset or re-connection. In cases where there are not multi-path
options present, the error goes back to the callee - the filesystem
or application. Not good.

The common routine was rewritten and calling syntax slightly expanded
so that per-transport is_ready routines don't need to be present.
The transports now call the routine directly. The routine is now a
fabrics routine rather than an inline function.

The routine now looks at controller state to decide the action to
take. Some states mandate io failure. Others define the condition where
a command can be accepted.  When the decision is unclear, a generic
queue-or-reject check is made to look for failfast or multipath ios and
only fails the io if it is so marked. Otherwise, the io will be queued
and wait for the controller state to resolve.

Admin commands issued via ioctl share a live admin queue with commands
from the transport for controller init. The ioctls could be intermixed
with the initialization commands. It's possible for the ioctl cmd to
be issued prior to the controller being enabled. To block this, the
ioctl admin commands need to be distinguished from admin commands used
for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to
reflect this division and set it on ioctls requests.  As the
nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(),
ensure that commands allocated by the ioctl path (actually anything
in core.c) preps the nvme_req(req) before starting the io. This will
preserve the USERCMD flag during execution and/or retry.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.e>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 09:58:27 -06:00
Nitzan Carmi
b435ecea2a nvme: Add .stop_ctrl to nvme ctrl ops
For consistancy reasons, any fabric-specific works
(e.g error recovery/reconnect) should be canceled in
nvme_stop_ctrl, as for all other NVMe pending works
(e.g. scan, keep alive).

The patch aims to simplify the logic of the code, as
we now only rely on a vague demand from any fabric
to flush its private workqueues at the beginning of
.delete_ctrl op.

Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26 08:53:43 -06:00
Nitzan Carmi
187c0832ee nvme-rdma: Allow DELETING state change failure in error_recovery
While error recovery is ongoing, it is OK to move
ctrl to DELETING state (from concurrent delete_work).
Thus we don't need a warning for that case.

Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26 08:53:43 -06:00
Max Gurtovoy
9bad0404ec nvme-rdma: Don't flush delete_wq by default during remove_one
The .remove_one function is called for any ib_device removal.
In case the removed device has no reference in our driver, there
is no need to flush the work queue.

Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26 08:53:43 -06:00
Max Gurtovoy
77d0612da0 nvme: centralize ctrl removal prints
nvme_delete_ctrl can be called from various contexts in parallel,
and cause duplicated information prints, even though the specific
context doesn't perform the actual removal. Instead, print the
information when the actual removal occurs.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26 08:53:43 -06:00
Jens Axboe
468f098734 Merge branch 'for-jens' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Keith for 4.16-rc.

* 'for-jens' of git://git.infradead.org/nvme:
  nvmet: fix PSDT field check in command format
  nvme-multipath: fix sysfs dangerously created links
  nvme-pci: Fix nvme queue cleanup if IRQ setup fails
  nvmet-loop: use blk_rq_payload_bytes for sgl selection
  nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
  nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
2018-02-28 12:18:58 -07:00
Christoph Hellwig
0d30992395 nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
blk_rq_bytes does the wrong thing for special payloads like discards and
might cause the driver to not set up a SGL.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-02-22 01:45:32 -07:00
Nitzan Carmi
8000d1fdb0 nvme-rdma: fix sysfs invoked reset_ctrl error flow
When reset_controller that is invoked by sysfs fails,
it enters an error flow which practically removes the
nvme ctrl entirely (similar to delete_ctrl flow). It
causes the system to hang, since a sysfs attribute cannot
be unregistered by one of its own methods.

This can be fixed by calling delete_ctrl as a work rather
than sequential code. In addition, it should give the ctrl
a chance to recover using reconnection mechanism (consistant
with FC reset_ctrl error flow). Also, while we're here, return
suitable errno in case the reset ended with non live ctrl.

Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-14 15:44:22 +02:00
Max Gurtovoy
b754a32c66 nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process
In order to avoid concurrent error recovery during initialization
process (allowed by the NVME_CTRL_NEW --> NVME_CTRL_RESETTING transition)
we must mark the ctrl as CONNECTING before initial connection
establisment.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-08 18:35:53 +02:00
Max Gurtovoy
ad6a0a52e6 nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
In pci transport, this state is used to mark the initialization
process. This should be also used in other transports as well.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-08 18:35:53 +02:00
Linus Torvalds
0a4b6e2f80 Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
 "This is the main pull request for block IO related changes for the
  4.16 kernel. Nothing major in this pull request, but a good amount of
  improvements and fixes all over the map. This contains:

   - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
     Paolo.

   - Support for SMR zones for deadline and mq-deadline from Damien and
     Christoph.

   - Set of fixes for bcache by way of Michael Lyle, including fixes
     from himself, Kent, Rui, Tang, and Coly.

   - Series from Matias for lightnvm with fixes from Hans Holmberg,
     Javier, and Matias. Mostly centered around pblk, and the removing
     rrpc 1.2 in preparation for supporting 2.0.

   - A couple of NVMe pull requests from Christoph. Nothing major in
     here, just fixes and cleanups, and support for command tracing from
     Johannes.

   - Support for blk-throttle for tracking reads and writes separately.
     From Joseph Qi. A few cleanups/fixes also for blk-throttle from
     Weiping.

   - Series from Mike Snitzer that enables dm to register its queue more
     logically, something that's alwways been problematic on dm since
     it's a stacked device.

   - Series from Ming cleaning up some of the bio accessor use, in
     preparation for supporting multipage bvecs.

   - Various fixes from Ming closing up holes around queue mapping and
     quiescing.

   - BSD partition fix from Richard Narron, fixing a problem where we
     can't mount newer (10/11) FreeBSD partitions.

   - Series from Tejun reworking blk-mq timeout handling. The previous
     scheme relied on atomic bits, but it had races where we would think
     a request had timed out if it to reused at the wrong time.

   - null_blk now supports faking timeouts, to enable us to better
     exercise and test that functionality separately. From me.

   - Kill the separate atomic poll bit in the request struct. After
     this, we don't use the atomic bits on blk-mq anymore at all. From
     me.

   - sgl_alloc/free helpers from Bart.

   - Heavily contended tag case scalability improvement from me.

   - Various little fixes and cleanups from Arnd, Bart, Corentin,
     Douglas, Eryu, Goldwyn, and myself"

* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
  block: remove smart1,2.h
  nvme: add tracepoint for nvme_complete_rq
  nvme: add tracepoint for nvme_setup_cmd
  nvme-pci: introduce RECONNECTING state to mark initializing procedure
  nvme-rdma: remove redundant boolean for inline_data
  nvme: don't free uuid pointer before printing it
  nvme-pci: Suspend queues after deleting them
  bsg: use pr_debug instead of hand crafted macros
  blk-mq-debugfs: don't allow write on attributes with seq_operations set
  nvme-pci: Fix queue double allocations
  block: Set BIO_TRACE_COMPLETION on new bio during split
  blk-throttle: use queue_is_rq_based
  block: Remove kblockd_schedule_delayed_work{,_on}()
  blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
  blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
  lib/scatterlist: Fix chaining support in sgl_alloc_order()
  blk-throttle: track read and write request individually
  block: add bdev_read_only() checks to common helpers
  block: fail op_is_write() requests to read-only partitions
  blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
  ...
2018-01-29 11:51:49 -08:00
Max Gurtovoy
1dad3a67fb nvme-rdma: remove redundant boolean for inline_data
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-25 18:41:40 +01:00
Roy Shterman
b227c59b9b nvme: host delete_work and reset_work on separate workqueues
We need to ensure that delete_work will be hosted on a different
workqueue than all the works we flush or cancel from it.
Otherwise we may hit a circular dependency warning [1].

Also, given that delete_work flushes reset_work, host reset_work
on nvme_reset_wq and delete_work on nvme_delete_wq. In addition,
fix the flushing in the individual drivers to flush nvme_delete_wq
when draining queued deletes.

[1]:
[  178.491942] =============================================
[  178.492718] [ INFO: possible recursive locking detected ]
[  178.493495] 4.9.0-rc4-c844263313a8-lb #3 Tainted: G           OE
[  178.494382] ---------------------------------------------
[  178.495160] kworker/5:1/135 is trying to acquire lock:
[  178.495894]  (
[  178.496120] "nvme-wq"
[  178.496471] ){++++.+}
[  178.496599] , at:
[  178.496921] [<ffffffffa70ac206>] flush_work+0x1a6/0x2d0
[  178.497670]
               but task is already holding lock:
[  178.498499]  (
[  178.498724] "nvme-wq"
[  178.499074] ){++++.+}
[  178.499202] , at:
[  178.499520] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.500343]
               other info that might help us debug this:
[  178.501269]  Possible unsafe locking scenario:

[  178.502113]        CPU0
[  178.502472]        ----
[  178.502829]   lock(
[  178.503115] "nvme-wq"
[  178.503467] );
[  178.503716]   lock(
[  178.504001] "nvme-wq"
[  178.504353] );
[  178.504601]
                *** DEADLOCK ***

[  178.505441]  May be due to missing lock nesting notation

[  178.506453] 2 locks held by kworker/5:1/135:
[  178.507068]  #0:
[  178.507330]  (
[  178.507598] "nvme-wq"
[  178.507726] ){++++.+}
[  178.508079] , at:
[  178.508173] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.509004]  #1:
[  178.509265]  (
[  178.509532] (&ctrl->delete_work)
[  178.509795] ){+.+.+.}
[  178.510145] , at:
[  178.510239] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.511070]
               stack backtrace:
:
[  178.511693] CPU: 5 PID: 135 Comm: kworker/5:1 Tainted: G           OE   4.9.0-rc4-c844263313a8-lb #3
[  178.512974] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[  178.514247] Workqueue: nvme-wq nvme_del_ctrl_work [nvme_tcp]
[  178.515071]  ffffc2668175bae0 ffffffffa7450823 ffffffffa88abd80 ffffffffa88abd80
[  178.516195]  ffffc2668175bb98 ffffffffa70eb012 ffffffffa8d8d90d ffff9c472e9ea700
[  178.517318]  ffff9c472e9ea700 ffff9c4700000000 ffff9c4700007200 ab83be61bec0d50e
[  178.518443] Call Trace:
[  178.518807]  [<ffffffffa7450823>] dump_stack+0x85/0xc2
[  178.519542]  [<ffffffffa70eb012>] __lock_acquire+0x17d2/0x18f0
[  178.520377]  [<ffffffffa75839a7>] ? serial8250_console_putchar+0x27/0x30
[  178.521330]  [<ffffffffa7583980>] ? wait_for_xmitr+0xa0/0xa0
[  178.522174]  [<ffffffffa70ac1eb>] ? flush_work+0x18b/0x2d0
[  178.522975]  [<ffffffffa70eb7cb>] lock_acquire+0x11b/0x220
[  178.523753]  [<ffffffffa70ac206>] ? flush_work+0x1a6/0x2d0
[  178.524535]  [<ffffffffa70ac229>] flush_work+0x1c9/0x2d0
[  178.525291]  [<ffffffffa70ac206>] ? flush_work+0x1a6/0x2d0
[  178.526077]  [<ffffffffa70a9cf0>] ? flush_workqueue_prep_pwqs+0x220/0x220
[  178.527040]  [<ffffffffa70ae7cf>] __cancel_work_timer+0x10f/0x1d0
[  178.527907]  [<ffffffffa70fecb9>] ? vprintk_default+0x29/0x40
[  178.528726]  [<ffffffffa71cb507>] ? printk+0x48/0x50
[  178.529434]  [<ffffffffa70ae8c3>] cancel_delayed_work_sync+0x13/0x20
[  178.530381]  [<ffffffffc042100b>] nvme_stop_ctrl+0x5b/0x70 [nvme_core]
[  178.531314]  [<ffffffffc0403dcc>] nvme_del_ctrl_work+0x2c/0x50 [nvme_tcp]
[  178.532271]  [<ffffffffa70ad741>] process_one_work+0x1e1/0x6a0
[  178.533101]  [<ffffffffa70ad6c2>] ? process_one_work+0x162/0x6a0
[  178.533954]  [<ffffffffa70adc4e>] worker_thread+0x4e/0x490
[  178.534735]  [<ffffffffa70adc00>] ? process_one_work+0x6a0/0x6a0
[  178.535588]  [<ffffffffa70adc00>] ? process_one_work+0x6a0/0x6a0
[  178.536441]  [<ffffffffa70b48cf>] kthread+0xff/0x120
[  178.537149]  [<ffffffffa70b47d0>] ? kthread_park+0x60/0x60
[  178.538094]  [<ffffffffa70b47d0>] ? kthread_park+0x60/0x60
[  178.538900]  [<ffffffffa78e332a>] ret_from_fork+0x2a/0x40

Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 17:09:30 +01:00
Roy Shterman
0de5cd367c nvme-fabrics: protect against module unload during create_ctrl
NVMe transport driver module unload may (and usually does) trigger
iteration over the active controllers and delete them all (sometimes
under a mutex).  However, a controller can be created concurrently with
module unload which can lead to leakage of resources (most important char
device node leakage) in case the controller creation occured after the
unload delete and drain sequence.  To protect against this, we take a
module reference to guarantee that the nvme transport driver is not
unloaded while creating a controller.

Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 11:01:56 +01:00
Sagi Grimberg
d5bf4b7f43 nvme-rdma: fix concurrent reset and reconnect
Now ctrl state machine allows to transition from RESETTING to
RECONNECTING.  In nvme-rdma when we receive a rdma cm DISONNECTED event,
we trigger nvme_rdma_error_recovery. This happens also when we execute a
controller reset, issue a cm diconnect request and receive a cm
disconnect reply, as a result, the reset work and the error recovery work
can run concurrently.

Until now the state machine prevented from the error recovery work from
running as a result of a controller reset (RESETTING -> RECONNECTING was
not allowed).

To fix this, we adopt the FC state machine approach, we always transition
from LIVE to RESETTING and only then to RECONNECTING.  We do this both
for the error recovery work and the controller reset work:

 1. transition to RESETTING
 2. teardown the controller association
 3. transition to RECONNECTING

This will restore the protection against reset work and error recovery work
from concurrently running together.

Fixes: 3cec7f9de4 ("nvme: allow controller RESETTING to RECONNECTING transition")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-29 10:32:58 +01:00
Max Gurtovoy
eb1bd249ba nvme-rdma: fix memory leak during queue allocation
In case nvme_rdma_wait_for_cm timeout expires before we get
an established or rejected event (rdma_connect succeeded) from
rdma_cm, we end up with leaking the ib transport resources for
dedicated queue. This scenario can easily reproduced using traffic
test during port toggling.
Also, in order to protect from parallel ib queue destruction, that
may be invoked from different context's, introduce new flag that
stands for transport readiness. While we're here, protect also against
a situation that we can receive rdma_cm events during ib queue destruction.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-28 08:49:22 -08:00
Israel Rukshin
f41725bbe1 nvme-rdma: Use mr pool
Currently, blk_mq_tagset_iter() iterate over initial hctx tags only.  If
an I/O scheduler is used, it doesn't iterate the hctx scheduler tags and
the static request aren't been updated. For example, while using NVMe
over Fabrics RDMA host, this cause us not to reinit the scheduler
requests and thus not re-register all the memory regions during the
tagset re-initialization in the reconnect flow.

This may lead to a memory registration error:

  "MEMREG for CQE 0xffff88044c14dce8 failed with status memory management operation error (6)"

With this commit we don't need to reinit the requests, and thus fix this
failure.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26 15:33:32 +01:00
Sagi Grimberg
3ef0279bb0 nvme-rdma: Check remotely invalidated rkey matches our expected rkey
If we got a remote invalidation on a bogus rkey, this is a protocol error.
Fail the connection in this case.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26 15:33:32 +01:00
Sagi Grimberg
2f122e4f51 nvme-rdma: wait for local invalidation before completing a request
We must not complete a request before the host memory region is
invalidated.  Luckily we have send with invalidate protocol support so
we usually don't need to execute it, but in case the target did not
invalidate a memory region for us, we must wait for the invalidation to
complete before unmapping host memory and completing the I/O.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26 15:33:32 +01:00
Sagi Grimberg
4af7f7ff92 nvme-rdma: don't complete requests before a send work request has completed
In order to guarantee that the HCA will never get an access violation
(either from invalidated rkey or from iommu) when retrying a send
operation we must complete a request only when both send completion and
the nvme cqe has arrived. We need to set the send/recv completions flags
atomically because we might have more than a single context accessing the
request concurrently (one is cq irq-poll context and the other is
user-polling used in IOCB_HIPRI).

Only then we are safe to invalidate the rkey (if needed), unmap the host
buffers, and complete the IO.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26 15:33:32 +01:00
Sagi Grimberg
b4b591c87f nvme-rdma: don't suppress send completions
The entire completions suppress mechanism is currently broken because the
HCA might retry a send operation (due to dropped ack) after the nvme
transaction has completed.

In order to handle this, we signal all send completions and introduce a
separate done handler for async events as they will be handled differently
(as they don't include in-capsule data by definition).

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26 15:33:32 +01:00
Sagi Grimberg
48832f8d58 nvme-fabrics: introduce init command check for a queue that is not alive
When the fabrics queue is not alive and fully functional, no commands
should be allowed to pass but connect (which moves the queue to a fully
functional state). Any other command should be failed, with either
temporary status BLK_STS_RESOUCE or permanent status BLK_STS_IOERR.

This is shared across all fabrics, hence move the check to fabrics
library.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20 08:28:31 +01:00
Linus Torvalds
e2c5923c34 Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the main pull request for block storage for 4.15-rc1.

  Nothing out of the ordinary in here, and no API changes or anything
  like that. Just various new features for drivers, core changes, etc.
  In particular, this pull request contains:

   - A patch series from Bart, closing the whole on blk/scsi-mq queue
     quescing.

   - A series from Christoph, building towards hidden gendisks (for
     multipath) and ability to move bio chains around.

   - NVMe
        - Support for native multipath for NVMe (Christoph).
        - Userspace notifications for AENs (Keith).
        - Command side-effects support (Keith).
        - SGL support (Chaitanya Kulkarni)
        - FC fixes and improvements (James Smart)
        - Lots of fixes and tweaks (Various)

   - bcache
        - New maintainer (Michael Lyle)
        - Writeback control improvements (Michael)
        - Various fixes (Coly, Elena, Eric, Liang, et al)

   - lightnvm updates, mostly centered around the pblk interface
     (Javier, Hans, and Rakesh).

   - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)

   - Writeback series that fix the much discussed hundreds of millions
     of sync-all units. This goes all the way, as discussed previously
     (me).

   - Fix for missing wakeup on writeback timer adjustments (Yafang
     Shao).

   - Fix laptop mode on blk-mq (me).

   - {mq,name} tupple lookup for IO schedulers, allowing us to have
     alias names. This means you can use 'deadline' on both !mq and on
     mq (where it's called mq-deadline). (me).

   - blktrace race fix, oopsing on sg load (me).

   - blk-mq optimizations (me).

   - Obscure waitqueue race fix for kyber (Omar).

   - NBD fixes (Josef).

   - Disable writeback throttling by default on bfq, like we do on cfq
     (Luca Miccio).

   - Series from Ming that enable us to treat flush requests on blk-mq
     like any other request. This is a really nice cleanup.

   - Series from Ming that improves merging on blk-mq with schedulers,
     getting us closer to flipping the switch on scsi-mq again.

   - BFQ updates (Paolo).

   - blk-mq atomic flags memory ordering fixes (Peter Z).

   - Loop cgroup support (Shaohua).

   - Lots of minor fixes from lots of different folks, both for core and
     driver code"

* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
  nvme: fix visibility of "uuid" ns attribute
  blk-mq: fixup some comment typos and lengths
  ide: ide-atapi: fix compile error with defining macro DEBUG
  blk-mq: improve tag waiting setup for non-shared tags
  brd: remove unused brd_mutex
  blk-mq: only run the hardware queue if IO is pending
  block: avoid null pointer dereference on null disk
  fs: guard_bio_eod() needs to consider partitions
  xtensa/simdisk: fix compile error
  nvme: expose subsys attribute to sysfs
  nvme: create 'slaves' and 'holders' entries for hidden controllers
  block: create 'slaves' and 'holders' entries for hidden gendisks
  nvme: also expose the namespace identification sysfs files for mpath nodes
  nvme: implement multipath access to nvme subsystems
  nvme: track shared namespaces
  nvme: introduce a nvme_ns_ids structure
  nvme: track subsystems
  block, nvme: Introduce blk_mq_req_flags_t
  block, scsi: Make SCSI quiesce and resume work reliably
  block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
  ...
2017-11-14 15:32:19 -08:00
Keith Busch
ad22c355b7 nvme: remove handling of multiple AEN requests
The driver can handle tracking only one AEN request, so this patch
removes handling for multiple ones.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart  <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
38dabe210f nvme: centralize AEN defines
All the transports were unnecessarilly duplicating the AEN request
accounting. This patch defines everything in one place.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Max Gurtovoy
1f61def985 nvme-rdma: fix nvme_rdma_create_queue_ib error flow
QP object is created using rdma_cm api, therefore the destruction
should use the same api for symmetry.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Sagi Grimberg
12fa1304ba nvme-rdma: reuse nvme_delete_ctrl when reconnect attempts expire
instead of just queueing delete work

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01 16:28:07 +01:00
Christoph Hellwig
6cd53d14aa nvme: consolidate common code from ->reset_work
No change in behavior except that the FC code cancels two work items a
little later now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01 16:28:06 +01:00
Christoph Hellwig
e9bc25874c nvme-rdma: remove nvme_rdma_remove_ctrl
It is only used in two places, and some of the work done by it will
be taken into common code soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01 16:28:05 +01:00
Christoph Hellwig
c5017e8570 nvme: move controller deletion to common code
Move the ->delete_work and the associated helpers to common code instead
of duplicating them in every driver.  This also adds the missing reference
get/put for the loop driver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01 16:28:04 +01:00
James Smart
36e835f243 nvme-rdma: add support for duplicate_connect option
Adds support for the duplicate_connect option. When set to true,
checks whether there's an existing controller via the same target
address (traddr), target port (trsvcid), and if specified, host
address (host_traddr). Fails the connection request if there is
an existing controller.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-10-27 09:25:32 +03:00
Christoph Hellwig
d22524a478 nvme: switch controller refcounting to use struct device
Instead of allocating a separate struct device for the character device
handle embedd it into struct nvme_ctrl and use it for the main controller
refcounting.  This removes double refcounting and gets us an automatic
reference for the character device operations.  We keep ctrl->device as a
pointer for now to avoid chaning printks all over, but in the future we
could look into message printing helpers that take a controller structure
similar to what other subsystems do.

Note the delete_ctrl operation always already has a reference (either
through sysfs due this change, or because every open file on the
/dev/nvme-fabrics node has a refernece) when it is entered now, so we
don't need to do the unless_zero variant there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2017-10-27 09:04:07 +03:00
Nitzan Carmi
e62a538da2 nvme-rdma: Add debug message when reaches timeout
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-10-23 16:28:42 +02:00