In order to unload a device driver and reload it, xprtrdma will need
to close a transport's interface adapter, and then call
rpcrdma_ia_open again, possibly finding a different interface
adapter.
Make rpcrdma_ia_open safe to call on the same transport multiple
times.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Current NFS clients rely on connection loss to determine when to
retransmit. In particular, for protocols like NFSv4, clients no
longer rely on RPC timeouts to drive retransmission: NFSv4 servers
are required to terminate a connection when they need a client to
retransmit pending RPCs.
When a server is no longer reachable, either because it has crashed
or because the network path has broken, the server cannot actively
terminate a connection. Thus NFS clients depend on transport-level
keepalive to determine when a connection must be replaced and
pending RPCs retransmitted.
However, RDMA RC connections do not have a native keepalive
mechanism. If an NFS/RDMA server crashes after a client has sent
RPCs successfully (an RC ACK has been received for all OTW RDMA
requests), there is no way for the client to know the connection is
moribund.
In addition, new RDMA requests are subject to the RPC-over-RDMA
credit limit. If the client has consumed all granted credits with
NFS traffic, it is not allowed to send another RDMA request until
the server replies. Thus it has no way to send a true keepalive when
the workload has already consumed all credits with pending RPCs.
To address this, forcibly disconnect a transport when an RPC times
out. This prevents moribund connections from stopping the
detection of failover or other configuration changes on the server.
Note that even if the connection is still good, retransmitting
any RPC will trigger a disconnect thanks to this logic in
xprt_rdma_send_request:
/* Must suppress retransmit to maintain credits */
if (req->rl_connect_cookie == xprt->connect_cookie)
goto drop_connection;
req->rl_connect_cookie = xprt->connect_cookie;
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprt_force_disconnect() is already invoked from the socket
transport. I want to invoke xprt_force_disconnect() from the
RPC-over-RDMA transport, which is a separate module from sunrpc.ko.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trying to create MRs while the transport is being torn down can
cause a crash.
Fixes: e2ac236c0b ("xprtrdma: Allocate MRs on demand")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The monitor mode delivery logic makes it hard to add any
kind of filtering in an efficient way, because the monitor
SKB is created first and then passed to all interfaces.
Rewrite the logic to create the monitor SKB the first time
it's actually needed, and then keep delivering it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When part of a bigger bandwidth (160 MHz) channel falls in DFS
channel range it is possible that the center frequency may not
necessarily be a radar channel. Remove the sanity check on channel
flag for IEEE80211_CHAN_RADAR in regulatory_propagate_dfs_state(),
this should fix the dfs state propagation for non-DFS center freq
which has DFS channels in it's bandwidth, should also fix unnecessary
WARN_ON() spam in regulatory_propagate_dfs_state().
Fixes: 8976672736 ("cfg80211: Share Channel DFS state across wiphys of same DFS domain")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the case getsockopt() is called with PACKET_HDRLEN and optlen < 4
|val| remains uninitialized and the syscall may behave differently
depending on its value, and even copy garbage to userspace on certain
architectures. To fix this we now return -EINVAL if optlen is too small.
This bug has been detected with KMSAN.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taking down the loopback device wreaks havoc on IPv6 routing. By
extension, taking down a VRF device wreaks havoc on its table.
Dmitry and Andrey both reported heap out-of-bounds reports in the IPv6
FIB code while running syzkaller fuzzer. The root cause is a dead dst
that is on the garbage list gets reinserted into the IPv6 FIB. While on
the gc (or perhaps when it gets added to the gc list) the dst->next is
set to an IPv4 dst. A subsequent walk of the ipv6 tables causes the
out-of-bounds access.
Andrey's reproducer was the key to getting to the bottom of this.
With IPv6, host routes for an address have the dst->dev set to the
loopback device. When the 'lo' device is taken down, rt6_ifdown initiates
a walk of the fib evicting routes with the 'lo' device which means all
host routes are removed. That process moves the dst which is attached to
an inet6_ifaddr to the gc list and marks it as dead.
The recent change to keep global IPv6 addresses added a new function,
fixup_permanent_addr, that is called on admin up. That function restarts
dad for an inet6_ifaddr and when it completes the host route attached
to it is inserted into the fib. Since the route was marked dead and
moved to the gc list, re-inserting the route causes the reported
out-of-bounds accesses. If the device with the address is taken down
or the address is removed, the WARN_ON in fib6_del is triggered.
All of those faults are fixed by regenerating the host route if the
existing one has been moved to the gc list, something that can be
determined by checking if the rt6i_ref counter is 0.
Fixes: f1705ec197 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During removing a bridge device, if the bridge is still up, a new mdb entry
still can be added in br_multicast_add_group() after all mdb entries are
removed in br_multicast_dev_del(). Like the path:
mld_ifc_timer_expire ->
mld_sendpack -> ...
br_multicast_rcv ->
br_multicast_add_group
The new mp's timer will be set up. If the timer expires after the bridge
is freed, it may cause use-after-free panic in br_multicast_group_expired.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
IP: [<ffffffffa07ed2c8>] br_multicast_group_expired+0x28/0xb0 [bridge]
Call Trace:
<IRQ>
[<ffffffff81094536>] call_timer_fn+0x36/0x110
[<ffffffffa07ed2a0>] ? br_mdb_free+0x30/0x30 [bridge]
[<ffffffff81096967>] run_timer_softirq+0x237/0x340
[<ffffffff8108dcbf>] __do_softirq+0xef/0x280
[<ffffffff8169889c>] call_softirq+0x1c/0x30
[<ffffffff8102c275>] do_softirq+0x65/0xa0
[<ffffffff8108e055>] irq_exit+0x115/0x120
[<ffffffff81699515>] smp_apic_timer_interrupt+0x45/0x60
[<ffffffff81697a5d>] apic_timer_interrupt+0x6d/0x80
Nikolay also found it would cause a memory leak - the mdb hash is
reallocated and not freed due to the mdb rehash.
unreferenced object 0xffff8800540ba800 (size 2048):
backtrace:
[<ffffffff816e2287>] kmemleak_alloc+0x67/0xc0
[<ffffffff81260bea>] __kmalloc+0x1ba/0x3e0
[<ffffffffa05c60ee>] br_mdb_rehash+0x5e/0x340 [bridge]
[<ffffffffa05c74af>] br_multicast_new_group+0x43f/0x6e0 [bridge]
[<ffffffffa05c7aa3>] br_multicast_add_group+0x203/0x260 [bridge]
[<ffffffffa05ca4b5>] br_multicast_rcv+0x945/0x11d0 [bridge]
[<ffffffffa05b6b10>] br_dev_xmit+0x180/0x470 [bridge]
[<ffffffff815c781b>] dev_hard_start_xmit+0xbb/0x3d0
[<ffffffff815c8743>] __dev_queue_xmit+0xb13/0xc10
[<ffffffff815c8850>] dev_queue_xmit+0x10/0x20
[<ffffffffa02f8d7a>] ip6_finish_output2+0x5ca/0xac0 [ipv6]
[<ffffffffa02fbfc6>] ip6_finish_output+0x126/0x2c0 [ipv6]
[<ffffffffa02fc245>] ip6_output+0xe5/0x390 [ipv6]
[<ffffffffa032b92c>] NF_HOOK.constprop.44+0x6c/0x240 [ipv6]
[<ffffffffa032bd16>] mld_sendpack+0x216/0x3e0 [ipv6]
[<ffffffffa032d5eb>] mld_ifc_timer_expire+0x18b/0x2b0 [ipv6]
This could happen when ip link remove a bridge or destroy a netns with a
bridge device inside.
With Nikolay's suggestion, this patch is to clean up bridge multicast in
ndo_uninit after bridge dev is shutdown, instead of br_dev_delete, so
that netif_running check in br_multicast_add_group can avoid this issue.
v1->v2:
- fix this issue by moving br_multicast_dev_del to ndo_uninit, instead
of calling dev_close in br_dev_delete.
(NOTE: Depends upon b6fe0440c6 ("bridge: implement missing ndo_uninit()"))
Fixes: e10177abf8 ("bridge: multicast: fix handling of temp and perm entries")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a149e7c7ce ("ipv6: sr: add support for SRH injection through
setsockopt") introduced handling of IPV6_SRCRT_TYPE_4, but at the same
time restricted it to only IPV6_SRCRT_TYPE_0 and
IPV6_SRCRT_TYPE_4. Previously, ipv6_push_exthdr() and fl6_update_dst()
would also handle other values (ie STRICT and TYPE_2).
Restore previous source routing behavior, by handling IPV6_SRCRT_STRICT
and IPV6_SRCRT_TYPE_2 the same way as IPV6_SRCRT_TYPE_0 in
ipv6_push_exthdr() and fl6_update_dst().
Fixes: a149e7c7ce ("ipv6: sr: add support for SRH injection through setsockopt")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides a generic SKB based non-optimized XDP path which is used
if either the driver lacks a specific XDP implementation, or the user
requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE.
It is arguable that perhaps I should have required something like
this as part of the initial XDP feature merge.
I believe this is critical for two reasons:
1) Accessibility. More people can play with XDP with less
dependencies. Yes I know we have XDP support in virtio_net, but
that just creates another depedency for learning how to use this
facility.
I wrote this to make life easier for the XDP newbies.
2) As a model for what the expected semantics are. If there is a pure
generic core implementation, it serves as a semantic example for
driver folks adding XDP support.
One thing I have not tried to address here is the issue of
XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems
incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or
whatever even if the XDP program doesn't try to push headers at all.
I think we really need the verifier to somehow propagate whether
certain XDP helpers are used or not.
v5:
- Handle both negative and positive offset after running prog
- Fix mac length in XDP_TX case (Alexei)
- Use rcu_dereference_protected() in free_netdev (kbuild test robot)
v4:
- Fix MAC header adjustmnet before calling prog (David Ahern)
- Disable LRO when generic XDP is installed (Michael Chan)
- Bypass qdisc et al. on XDP_TX and record the event (Alexei)
- Do not perform generic XDP on reinjected packets (DaveM)
v3:
- Make sure XDP program sees packet at MAC header, push back MAC
header if we do XDP_TX. (Alexei)
- Elide GRO when generic XDP is in use. (Alexei)
- Add XDP_FLAG_SKB_MODE flag which the user can use to request generic
XDP even if the driver has an XDP implementation. (Alexei)
- Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS
attribute. (Daniel)
v2:
- Add some "fall through" comments in switch statements based
upon feedback from Andrew Lunn
- Use RCU for generic xdp_prog, thanks to Johannes Berg.
Tested-by: Andy Gospodarek <andy@greyhouse.net>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until now in tipc_recv_stream(), we update the received
unacknowledged bytes based on a stack variable and not based on the
actual message size.
If the user buffer passed at tipc_recv_stream() is smaller than the
received skb, the size variable in stack differs from the actual
message size in the skb. This leads to a flow control accounting
error causing permanent congestion.
In this commit, we fix this accounting error by always using the
size of the incoming message.
Fixes: 10724cc7bb ("tipc: redesign connection-level flow control")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until now in tipc_send_stream(), we return -1 when the socket
encounters link congestion even if the socket had successfully
sent partial data. This is incorrect as the application resends
the same the partial data leading to data corruption at
receiver's end.
In this commit, we return the partially sent bytes as the return
value at link congestion.
Fixes: 10724cc7bb ("tipc: redesign connection-level flow control")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ipv6 stub pointer is currently initialized before the ipv6
routing subsystem: a 3rd party can access and use such stub
before the routing data is ready.
Moreover, such pointer is not cleared in case of initialization
error, possibly leading to dangling pointers usage.
This change addresses the above moving the stub initialization
at the end of ipv6 init code.
Fixes: 5f81bd2e5d ("ipv6: export a stub for IPv6 symbols used by vxlan")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export type of l2tpeth interfaces to userspace
(/sys/class/net/<iface>/uevent).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export naming scheme used when creating l2tpeth interfaces
(/sys/class/net/<iface>/name_assign_type). This let userspace know if
the device's name has been generated automatically or defined manually.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
per discussion at netconf/netdev:
When we have an action that is capable of branching (example a policer),
we can achieve a continuation of the action graph by programming a
"continue" where we find an exact replica of the same filter rule with a lower
priority and the remainder of the action graph. When you have 100s of thousands
of filters which require such a feature it gets very inefficient to do two
lookups.
This patch completes a leftover feature of action codes. Its time has come.
Example below where a user labels packets with a different skbmark on ingress
of a port depending on whether they have/not exceeded the configured rate.
This mark is then used to make further decisions on some egress port.
#rate control, very low so we can easily see the effect
sudo $TC actions add action police rate 1kbit burst 90k \
conform-exceed pipe/jump 2 index 10
# skbedit index 11 will be used if the user conforms
sudo $TC actions add action skbedit mark 11 ok index 11
# skbedit index 12 will be used if the user does not conform
sudo $TC actions add action skbedit mark 12 ok index 12
#lets bind the user ..
sudo $TC filter add dev $ETH parent ffff: protocol ip prio 8 u32 \
match ip dst 127.0.0.8/32 flowid 1:10 \
action police index 10 \
action skbedit index 11 \
action skbedit index 12
#run a ping -f and see what happens..
#
jhs@foobar:~$ sudo $TC -s filter ls dev $ETH parent ffff: protocol ip
filter pref 8 u32
filter pref 8 u32 fh 800: ht divisor 1
filter pref 8 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2800 success 1005)
match 7f000008/ffffffff at 16 (success 1005 )
action order 1: police 0xa rate 1Kbit burst 23440b mtu 2Kb action pipe/jump 2 overhead 0b
ref 2 bind 1 installed 207 sec used 122 sec
Action statistics:
Sent 84420 bytes 1005 pkt (dropped 0, overlimits 721 requeues 0)
backlog 0b 0p requeues 0
action order 2: skbedit mark 11 pass
index 11 ref 2 bind 1 installed 204 sec used 122 sec
Action statistics:
Sent 60564 bytes 721 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
action order 3: skbedit mark 12 pass
index 12 ref 2 bind 1 installed 201 sec used 122 sec
Action statistics:
Sent 23856 bytes 284 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Not bad, about 28% non-conforming packets..
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When recalculating the outer ICMPv6 checksum for a reverse path NATv6
such as ICMPV6_TIME_EXCEED nf_nat_icmpv6_reply_translation() was
accessing data beyond the headlen of the skb for non-linear skb. This
resulted in incorrect ICMPv6 checksum as garbage data was used.
Patch replaces csum_partial() with skb_checksum() which supports
non-linear skbs similar to nf_nat_icmp_reply_translation() from ipv4.
Signed-off-by: Dave Johnson <dave-kernel@centerclick.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, after adding the following nft rules:
# nft add set x target1 { type ipv4_addr \; flags timeout \;}
# nft add rule x y set add ip daddr timeout 1d @target1 counter
the counters will always be zero despite of the elements are added
to the dynamic set "target1" or not, as we will break the nft expr
traversal unconditionally:
# nft list ruleset
...
set target1 {
...
elements = { 8.8.8.8 expires 23h59m53s}
}
chain output {
...
set add ip daddr timeout 1d @target1 counter packets 0 bytes 0
^ ^
...
}
Since we add the elements to the set successfully, we should continue
to the next expression.
Additionally, if elements are added to "flow table" successfully, we
will _always_ continue to the next expr, even if the operation is
_OP_ADD. So it's better to keep them to be consistent.
Fixes: 22fe54d5fe ("netfilter: nf_tables: add support for dynamic set updates")
Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When trying to redirect bridged frames to the bridge device itself or
a bridge port (brouting) via the dnat target then this currently fails:
The ethernet destination of the frame is dnat'ed to the MAC address of
the bridge device or port just fine. However, the IP code drops it in
the beginning of ip_input.c/ip_rcv() as the dnat target left
the skb->pkt_type as PACKET_OTHERHOST.
Fixing this by resetting skb->pkt_type to an appropriate type after
dnat'ing.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The CAN gateway was not implemented as per-net in the initial network
namespace support by Mario Kicherer (8e8cda6d73).
This patch enables the CAN gateway to be used in different namespaces.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The CAN_BCM protocol and its procfs entries were not implemented as per-net
in the initial network namespace support by Mario Kicherer (8e8cda6d73).
This patch adds the missing per-net functionality for the CAN BCM.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The statistics and its proc output was not implemented as per-net in the
initial network namespace support by Mario Kicherer (8e8cda6d73).
This patch adds the missing per-net statistics for the CAN subsystem.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_rx_alldev_list is a per-net data structure now. Remove it's definition
here and can_rx_dev_list too.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The namespace support for the CAN subsystem does not need any additional
memory. So when ".size = 0" there's no extra memory allocated by the system.
And therefore ".id" is obsolete too.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The can_rx_alldev_list is a per-net data structure now and allocated in
can_pernet_init(). Make sure the memory is free'd in can_pernet_exit() too.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* Convert both smp and selftest to crypto kpp API
* Remove module ecc as no more required
* Add ecdh_helper functions for wrapping kpp async calls
This patch has been tested *only* with selftest, which is called on
module loading.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Function nlmsg_new() will return a NULL pointer if there is no enough
memory, and its return value should be checked before it is used.
However, in function tipc_nl_node_get_monitor(), the validation of the
return value of function nlmsg_new() is missed. This patch fixes the
bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function nla_nest_start() may return a NULL pointer on error. However,
in function lwtunnel_fill_encap(), the return value of nla_nest_start()
is not validated before it is used. This patch checks the return value
of nla_nest_start() against NULL.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to the tc flower classifier to match based on fields in MPLS
labels (TTL, Bottom of Stack, TC field, Label).
Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Cc: Gao Feng <fgao@ikuai8.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for parsing MPLS flows to the flow dissector in preparation for
adding MPLS match support to cls_flower.
Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Eric Dumazet <jhs@mojatatu.com>
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Cc: Gao Feng <fgao@ikuai8.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Paasch from Apple found another firewall issue for TFO:
After successful 3WHS using TFO, server and client starts to exchange
data. Afterwards, a 10s idle time occurs on this connection. After that,
firewall starts to drop every packet on this connection.
The fix for this issue is to extend existing firewall blackhole detection
logic in tcp_write_timeout() by removing the mss check.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This counter records the number of times the firewall blackhole issue is
detected and active TFO is disabled.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Middlebox firewall issues can potentially cause server's data being
blackholed after a successful 3WHS using TFO. Following are the related
reports from Apple:
https://www.nanog.org/sites/default/files/Paasch_Network_Support.pdf
Slide 31 identifies an issue where the client ACK to the server's data
sent during a TFO'd handshake is dropped.
C ---> syn-data ---> S
C <--- syn/ack ----- S
C (accept & write)
C <---- data ------- S
C ----- ACK -> X S
[retry and timeout]
https://www.ietf.org/proceedings/94/slides/slides-94-tcpm-13.pdf
Slide 5 shows a similar situation that the server's data gets dropped
after 3WHS.
C ---- syn-data ---> S
C <--- syn/ack ----- S
C ---- ack --------> S
S (accept & write)
C? X <- data ------ S
[retry and timeout]
This is the worst failure b/c the client can not detect such behavior to
mitigate the situation (such as disabling TFO). Failing to proceed, the
application (e.g., SSL library) may simply timeout and retry with TFO
again, and the process repeats indefinitely.
The proposed solution is to disable active TFO globally under the
following circumstances:
1. client side TFO socket detects out of order FIN
2. client side TFO socket receives out of order RST
We disable active side TFO globally for 1hr at first. Then if it
happens again, we disable it for 2h, then 4h, 8h, ...
And we reset the timeout to 1hr if a client side TFO sockets not opened
on loopback has successfully received data segs from server.
And we examine this condition during close().
The rational behind it is that when such firewall issue happens,
application running on the client should eventually close the socket as
it is not able to get the data it is expecting. Or application running
on the server should close the socket as it is not able to receive any
response from client.
In both cases, out of order FIN or RST will get received on the client
given that the firewall will not block them as no data are in those
frames.
And we want to disable active TFO globally as it helps if the middle box
is very close to the client and most of the connections are likely to
fail.
Also, add a debug sysctl:
tcp_fastopen_blackhole_detect_timeout_sec:
the initial timeout to use when firewall blackhole issue happens.
This can be set and read.
When setting it to 0, it means to disable the active disable logic.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparse and compiler warnings fixes from Stephen Hemminger.
From Roi Dayan and Or Gerlitz, Add devlink and mlx5 support for controlling
E-Switch encapsulation mode, this knob will enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY+5cRAAoJEEg/ir3gV/o+5c8H/1/khPzy26B2lWyjPC8CRCQF
eSd0tiHLgIqbZTbnIHTR+NbZ/SUFaukoJi8OKn1fGFHCCajWvPP4xkENVKrUdi3q
kOgNZb/R1V0j6SdELyoMalFPjAscTgdmwYMnry+vcjOxJ+H2uUTnMKXwFf8IsBjz
EINy8oZ5jZcejmft0c2O5HN4Bt/7U5ttM3CroAdcvPT9lq2DFJL2uCABhTO/1DdY
b7uVa47FnkqxX19Ebn7fjp5r3diGYOmCPMjdC89C//rbkLB8FN61EkcSLpGY3YNm
djmCPQ+xaa3ielmBpOk3AMayFEtYW0nDMj9eWECVByadRQZ2qz9wTVXBp5CX9zg=
=E3Jt
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2017-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2017-04-22
Sparse and compiler warnings fixes from Stephen Hemminger.
From Roi Dayan and Or Gerlitz, Add devlink and mlx5 support for controlling
E-Switch encapsulation mode, this knob will enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When arp_notify is set to 1 for either a specific interface or for 'all'
interfaces, gratuitous arp requests are sent. Since ndisc_notify is the
ipv6 equivalent to arp_notify, it should follow the same semantics.
Commit 4a6e3c5def ("net: ipv6: send unsolicited NA on admin up") sends
the NA on admin up. The final piece is checking devconf_all->ndisc_notify
in addition to the per device setting. Add it.
Fixes: 5cb04436ee ("ipv6: add knob to send unsolicited ND on link-layer address change")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 834184b1f3 ("netfilter: defrag: only register defrag
functionality if needed") used the outdated XT_SOCKET_HAVE_IPV6 macro
which was removed earlier in commit 8db4c5be88 ("netfilter: move
socket lookup infrastructure to nf_socket_ipv{4,6}.c"). With that macro
never being defined, the xt_socket match emits an "Unknown family 10"
warning when used with IPv6:
WARNING: CPU: 0 PID: 1377 at net/netfilter/xt_socket.c:160 socket_mt_enable_defrag+0x47/0x50 [xt_socket]
Unknown family 10
Modules linked in: xt_socket nf_socket_ipv4 nf_socket_ipv6 nf_defrag_ipv4 [...]
CPU: 0 PID: 1377 Comm: ip6tables-resto Not tainted 4.10.10 #1
Hardware name: [...]
Call Trace:
? __warn+0xe7/0x100
? socket_mt_enable_defrag+0x47/0x50 [xt_socket]
? socket_mt_enable_defrag+0x47/0x50 [xt_socket]
? warn_slowpath_fmt+0x39/0x40
? socket_mt_enable_defrag+0x47/0x50 [xt_socket]
? socket_mt_v2_check+0x12/0x40 [xt_socket]
? xt_check_match+0x6b/0x1a0 [x_tables]
? xt_find_match+0x93/0xd0 [x_tables]
? xt_request_find_match+0x20/0x80 [x_tables]
? translate_table+0x48e/0x870 [ip6_tables]
? translate_table+0x577/0x870 [ip6_tables]
? walk_component+0x3a/0x200
? kmalloc_order+0x1d/0x50
? do_ip6t_set_ctl+0x181/0x490 [ip6_tables]
? filename_lookup+0xa5/0x120
? nf_setsockopt+0x3a/0x60
? ipv6_setsockopt+0xb0/0xc0
? sock_common_setsockopt+0x23/0x30
? SyS_socketcall+0x41d/0x630
? vfs_read+0xfa/0x120
? do_fast_syscall_32+0x7a/0x110
? entry_SYSENTER_32+0x47/0x71
This patch brings the conditional back in line with how the rest of the
file handles IPv6.
Fixes: 834184b1f3 ("netfilter: defrag: only register defrag functionality if needed")
Signed-off-by: Peter Tirsek <peter@tirsek.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should acquire the ct->lock before accessing or modifying the
nf_ct_seqadj, as another CPU may modify the nf_ct_seqadj at the same
time during its packet proccessing.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After converting to use rcu for conntrack hash, one CPU may update
the ct->status via ctnetlink, while another CPU may process the
packets and update the ct->status.
So the non-atomic operation "ct->status |= status;" via ctnetlink
becomes unsafe, and this may clear the IPS_DYING_BIT bit set by
another CPU unexpectedly. For example:
CPU0 CPU1
ctnetlink_change_status __nf_conntrack_find_get
old = ct->status nf_ct_gc_expired
- nf_ct_kill
- test_and_set_bit(IPS_DYING_BIT
new = old | status; -
ct->status = new; <-- oops, _DYING_ is cleared!
Now using a series of atomic bit operation to solve the above issue.
Also note, user shouldn't set IPS_TEMPLATE, IPS_SEQ_ADJUST directly,
so make these two bits be unchangable too.
If we set the IPS_TEMPLATE_BIT, ct will be freed by nf_ct_tmpl_free,
but actually it is alloced by nf_conntrack_alloc.
If we set the IPS_SEQ_ADJUST_BIT, this may cause the NULL pointer
deference, as the nfct_seqadj(ct) maybe NULL.
Last, add some comments to describe the logic change due to the
commit a963d710f3 ("netfilter: ctnetlink: Fix regression in CTA_STATUS
processing"), which makes me feel a little confusing.
Fixes: 76507f69c4 ("[NETFILTER]: nf_conntrack: use RCU for conntrack hash")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, ctnetlink_change_conntrack is always protected by _expect_lock,
but this will cause a deadlock when deleting the helper from a conntrack,
as the _expect_lock will be acquired again by nf_ct_remove_expectations:
CPU0
----
lock(nf_conntrack_expect_lock);
lock(nf_conntrack_expect_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by lt-conntrack_gr/12853:
#0: (&table[i].mutex){+.+.+.}, at: [<ffffffffa05e2009>]
nfnetlink_rcv_msg+0x399/0x6a9 [nfnetlink]
#1: (nf_conntrack_expect_lock){+.....}, at: [<ffffffffa05f2c1f>]
ctnetlink_new_conntrack+0x17f/0x408 [nf_conntrack_netlink]
Call Trace:
dump_stack+0x85/0xc2
__lock_acquire+0x1608/0x1680
? ctnetlink_parse_tuple_proto+0x10f/0x1c0 [nf_conntrack_netlink]
lock_acquire+0x100/0x1f0
? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack]
_raw_spin_lock_bh+0x3f/0x50
? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack]
nf_ct_remove_expectations+0x32/0x90 [nf_conntrack]
ctnetlink_change_helper+0xc6/0x190 [nf_conntrack_netlink]
ctnetlink_new_conntrack+0x1b2/0x408 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink]
? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink]
? nfnetlink_bind+0x1a0/0x1a0 [nfnetlink]
netlink_rcv_skb+0xa4/0xc0
nfnetlink_rcv+0x87/0x770 [nfnetlink]
Since the operations are unrelated to nf_ct_expect, so we can drop the
_expect_lock. Also note, after removing the _expect_lock protection,
another CPU may invoke nf_conntrack_helper_unregister, so we should
use rcu_read_lock to protect __nf_conntrack_helper_find invoked by
ctnetlink_change_helper.
Fixes: ca7433df3a ("netfilter: conntrack: seperate expect locking from nf_conntrack_lock")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
First, when creating a new ct, we will invoke request_module to try to
load the related inkernel cthelper. So there's no need to call the
request_module again when updating the ct helpinfo.
Second, ctnetlink_change_helper may be called with rcu_read_lock held,
i.e. rcu_read_lock -> nfqnl_recv_verdict -> nfqnl_ct_parse ->
ctnetlink_glue_parse -> ctnetlink_glue_parse_ct ->
ctnetlink_change_helper. But the request_module invocation may sleep,
so we can't call it with the rcu_read_lock held.
Remove it now.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
cthelpers added via nfnetlink may have the same tuple, i.e. except for
the l3proto and l4proto, other fields are all zero. So even with the
different names, we will also fail to add them:
# nfct helper add ssdp inet udp
# nfct helper add tftp inet udp
nfct v1.4.3: netlink error: File exists
So in order to avoid unpredictable behaviour, we should:
1. cthelpers can be selected by nft ct helper obj or xt_CT target, so
report error if duplicated { name, l3proto, l4proto } tuple exist.
2. cthelpers can be selected by nf_ct_tuple_src_mask_cmp when
nf_ct_auto_assign_helper is enabled, so also report error if duplicated
{ l3proto, l4proto, src-port } tuple exist.
Also note, if the cthelper is added from userspace, then the src-port will
always be zero, it's invalid for nf_ct_auto_assign_helper, so there's no
need to check the second point listed above.
Fixes: 893e093c78 ("netfilter: nf_ct_helper: bail out on duplicated helpers")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conntrack helpers do not check for a potentially clashing conntrack
entry when creating a new expectation. Also, nf_conntrack_in() will
check expectations (via init_conntrack()) only if a conntrack entry
can not be found. The expectation for a packet which also matches an
existing conntrack entry will not be removed by conntrack, and is
currently handled inconsistently by OVS, as OVS expects the
expectation to be removed when the connection tracking entry matching
that expectation is confirmed.
It should be noted that normally an IP stack would not allow reuse of
a 5-tuple of an old (possibly lingering) connection for a new data
connection, so this is somewhat unlikely corner case. However, it is
possible that a misbehaving source could cause conntrack entries be
created that could then interfere with new related connections.
Fix this in the OVS module by deleting the clashing conntrack entry
after an expectation has been matched. This causes the following
nf_conntrack_in() call also find the expectation and remove it when
creating the new conntrack entry, as well as the forthcoming reply
direction packets to match the new related connection instead of the
old clashing conntrack entry.
Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Reported-by: Yang Song <yangsong@vmware.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are two cases which causes refcnt leak.
1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should
free the timeout refcnt.
Now goto the err_put_timeout error handler instead of going ahead.
2. When the time policy is not found, we should call module_put.
Otherwise, the related cthelper module cannot be removed anymore.
It is easy to reproduce by typing the following command:
# iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new optional conntrack action attribute OVS_CT_ATTR_EVENTMASK,
which can be used in conjunction with the commit flag
(OVS_CT_ATTR_COMMIT) to set the mask of bits specifying which
conntrack events (IPCT_*) should be delivered via the Netfilter
netlink multicast groups. Default behavior depends on the system
configuration, but typically a lot of events are delivered. This can be
very chatty for the NFNLGRP_CONNTRACK_UPDATE group, even if only some
types of events are of interest.
Netfilter core init_conntrack() adds the event cache extension, so we
only need to set the ctmask value. However, if the system is
configured without support for events, the setting will be skipped due
to extension not being found.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix typo in a comment.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, UDP checksum offloads could corrupt ESP packets by attempting
to calculate UDP checksum when this inner UDP packet is already protected
by IPsec.
One way to reproduce this bug is to have a VM with virtio_net driver (UFO
set to ON in the guest VM); and then encapsulate all guest's Ethernet
frames in Geneve; and then further encrypt Geneve with IPsec. In this
case following symptoms are observed:
1. If using ixgbe NIC, then it will complain with following error message:
ixgbe 0000:01:00.1: partial checksum but l4 proto=32!
2. Receiving IPsec stack will drop all the corrupted ESP packets and
increase XfrmInStateProtoError counter in /proc/net/xfrm_stat.
3. iperf UDP test from the VM with packet sizes above MTU will not work at
all.
4. iperf TCP test from the VM will get ridiculously low performance because.
Signed-off-by: Ansis Atteka <aatteka@ovn.org>
Co-authored-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David reported that doing the following:
ip li add red type vrf table 10
ip link set dev eth1 vrf red
ip addr add 127.0.0.1/8 dev red
ip link set dev eth1 up
ip li set red up
ping -c1 -w1 -I red 127.0.0.1
ip li del red
when either policy routing IP rules are present or the local table
lookup ip rule is before the l3mdev lookup results in a hang with
these messages:
unregister_netdevice: waiting for red to become free. Usage count = 1
The problem is caused by caching the dst used for sending the packet
out of the specified interface on a local route with a different
nexthop interface. Thus the dst could stay around until the route in
the table the lookup was done is deleted which may be never.
Address the problem by not forcing output device to be the l3mdev in
the flow's output interface if the lookup didn't use the l3mdev. This
then results in the dst using the right device according to the route.
Changes in v2:
- make the dev_out passed in by __ip_route_output_key_hash correct
instead of checking the nh dev if FLOWI_FLAG_SKIP_NH_OIF is set as
suggested by David.
Fixes: 5f02ce24c2 ("net: l3mdev: Allow the l3mdev to be a loopback")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Suggested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fanout uses a per net global namespace. A process that intends to create
a new fanout group can accidentally join an existing group. It is not
possible to detect this.
Add socket option PACKET_FANOUT_FLAG_UNIQUEID. When specified the
supplied fanout group id must be set to 0, and the kernel chooses an id
that is not already in use. This is an ephemeral flag so that
other sockets can be added to this group using setsockopt, but NOT
specifying this flag. The current getsockopt(..., PACKET_FANOUT, ...)
can be used to retrieve the new group id.
We assume that there are not a lot of fanout groups and that this is not
a high frequency call.
The method assigns ids starting at zero and increases until it finds an
unused id. It keeps track of the last assigned id, and uses it as a
starting point to find new ids.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The virtio drivers deal with struct virtio_vsock_pkt. Add
virtio_transport_deliver_tap_pkt(pkt) for handing packets to the
vsockmon device.
We call virtio_transport_deliver_tap_pkt(pkt) from
net/vmw_vsock/virtio_transport.c and drivers/vhost/vsock.c instead of
common code. This is because the drivers may drop packets before
handing them to common code - we still want to capture them.
Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tap functions that can be used by the vsock transports to
deliver packets to vsockmon virtual network devices.
Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent commit moved esp_alloc_tmp() out of a lock
protected region, but forgot to remove the unlock from
the error path. This patch removes the forgotten unlock.
While at it, remove some unneeded error assignments too.
Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2 ("esp6: Reorganize esp_output")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This is an e-switch global knob to enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
The actual encap/decap is carried out (along with the matching and other actions)
per offloaded e-switch rules, e.g as done when offloading the TC tunnel key action.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Both conflict were simple overlapping changes.
In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the
conversion of the driver in net-next to use in-netdev stats.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the NFC pull request for 4.12. We have:
- Improvements for the pn533 command queue handling and device
registration order.
- Removal of platform data for the pn544 and st21nfca drivers.
- Additional device tree options to support more trf7970a hardware options.
- Support for Sony's RC-S380P through the port100 driver.
- Removal of the obsolte nfcwilink driver.
- Headers inclusion cleanups (miscdevice.h, unaligned.h) for many drivers.
-----BEGIN PGP SIGNATURE-----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=Zy1M
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.12 pull request
This is the NFC pull request for 4.12. We have:
- Improvements for the pn533 command queue handling and device
registration order.
- Removal of platform data for the pn544 and st21nfca drivers.
- Additional device tree options to support more trf7970a hardware options.
- Support for Sony's RC-S380P through the port100 driver.
- Removal of the obsolte nfcwilink driver.
- Headers inclusion cleanups (miscdevice.h, unaligned.h) for many drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If skb_pad() fails then it frees the skb so we should check for errors.
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-04-20
This adds the basic infrastructure for IPsec hardware
offloading, it creates a configuration API and adjusts
the packet path.
1) Add the needed netdev features to configure IPsec offloads.
2) Add the IPsec hardware offloading API.
3) Prepare the ESP packet path for hardware offloading.
4) Add gso handlers for esp4 and esp6, this implements
the software fallback for GSO packets.
5) Add xfrm replay handler functions for offloading.
6) Change ESP to use a synchronous crypto algorithm on
offloading, we don't have the option for asynchronous
returns when we handle IPsec at layer2.
7) Add a xfrm validate function to validate_xmit_skb. This
implements the software fallback for non GSO packets.
8) Set the inner_network and inner_transport members of
the SKB, as well as encapsulation, to reflect the actual
positions of these headers, and removes them only once
encryption is done on the payload.
From Ilan Tayari.
9) Prepare the ESP GRO codepath for hardware offloading.
10) Fix incorrect null pointer check in esp6.
From Colin Ian King.
11) Fix for the GSO software fallback path to detect the
fallback correctly.
From Ilan Tayari.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to NULL tp->root in ->destroy(), since tp is
going to be freed very soon, and existing readers are still
safe to read them.
For cls_route, we always init its tp->root, so it can't be NULL,
we can drop more useless code.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We could have a race condition where in ->classify() path we
dereference tp->root and meanwhile a parallel ->destroy() makes it
a NULL. Daniel cured this bug in commit d936377414
("net, sched: respect rcu grace period on cls destruction").
This happens when ->destroy() is called for deleting a filter to
check if we are the last one in tp, this tp is still linked and
visible at that time. The root cause of this problem is the semantic
of ->destroy(), it does two things (for non-force case):
1) check if tp is empty
2) if tp is empty we could really destroy it
and its caller, if cares, needs to check its return value to see if it
is really destroyed. Therefore we can't unlink tp unless we know it is
empty.
As suggested by Daniel, we could actually move the test logic to ->delete()
so that we can safely unlink tp after ->delete() tells us the last one is
just deleted and before ->destroy().
Fixes: 1e052be69d ("net_sched: destroy proto tp when all filters are gone")
Cc: Roi Dayan <roid@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey reported a fault in the IPv6 route code:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...
Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.
Fix by checking for the flag and failing with EINVAL.
Fixes: d52d3997f8 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add napi_id access to __sk_buff for socket filter program types, tc
program types and other bpf_convert_ctx_access() users. Having access
to skb->napi_id is useful for per RX queue listener siloing, f.e.
in combination with SO_ATTACH_REUSEPORT_EBPF and when busy polling is
used, meaning SO_REUSEPORT enabled listeners can then select the
corresponding socket at SYN time already [1]. The skb is marked via
skb_mark_napi_id() early in the receive path (e.g., napi_gro_receive()).
Currently, sockets can only use SO_INCOMING_NAPI_ID from 6d4339028b
("net: Introduce SO_INCOMING_NAPI_ID") as a socket option to look up
the NAPI ID associated with the queue for steering, which requires a
prior sk_mark_napi_id() after the socket was looked up.
Semantics for the __sk_buff napi_id access are similar, meaning if
skb->napi_id is < MIN_NAPI_ID (e.g. outgoing packets using sender_cpu),
then an invalid napi_id of 0 is returned to the program, otherwise a
valid non-zero napi_id.
[1] http://netdevconf.org/2.1/slides/apr6/dumazet-BUSY-POLLING-Netdev-2.1.pdf
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 07b26c9454 ("gso: Support partial splitting at the frag_list
pointer") assumes that all SKBs in a frag_list (except maybe the last
one) contain the same amount of GSO payload.
This assumption is not always correct, resulting in the following
warning message in the log:
skb_segment: too many frags
For example, mlx5 driver in Striding RQ mode creates some RX SKBs with
one frag, and some with 2 frags.
After GRO, the frag_list SKBs end up having different amounts of payload.
If this frag_list SKB is then forwarded, the aforementioned assumption
is violated.
Validate the assumption, and fall back to software GSO if it not true.
Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212
Fixes: 07b26c9454 ("gso: Support partial splitting at the frag_list pointer")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Constants used for tuning are generally a bad idea, especially as hardware
changes over time. Replace the constant 2 jiffies with sysctl variable
netdev_budget_usecs to enable sysadmins to tune the softirq processing.
Also document the variable.
For example, a very fast machine might tune this to 1000 microseconds,
while my regression testing 486DX-25 needs it to be 4000 microseconds on
a nearly idle network to prevent time_squeeze from being incremented.
Version 2: changed jiffies to microseconds for predictable units.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This feature allows the administrator to set an fwmark for
packets traversing a tunnel. This allows the use of independent
routing tables for tunneled packets without the use of iptables.
There is no concept of per-packet routing decisions through IPv4
tunnels, so this implementation does not need to work with
per-packet route lookups as the v6 implementation may
(with IP6_TNL_F_USE_ORIG_FWMARK).
Further, since the v4 tunnel ioctls share datastructures
(which can not be trivially modified) with the kernel's internal
tunnel configuration structures, the mark attribute must be stored
in the tunnel structure itself and passed as a parameter when
creating or changing tunnel attributes.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This feature allows the administrator to set an fwmark for
packets traversing a tunnel. This allows the use of independent
routing tables for tunneled packets without the use of iptables.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The icmpv6_param_prob() function already does a kfree_skb(),
this patch removes the duplicate one.
Fixes: 1ababeba4a ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
tag_lan9303.c does check for a NULL dst but that's already checked by
dsa_switch_rcv() one layer above.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Policing filters do not use the TCA_ACT_* enum and the tb[]
nlattr array in tcf_action_init_1() doesn't get filled for
them so we should not try to look for a TCA_ACT_COOKIE
attribute in the then uninitialized array.
The error handling in cookie allocation then calls
tcf_hash_release() leading to invalid memory access later
on.
Additionally, if cookie allocation fails after an already
existing non-policing filter has successfully been changed,
tcf_action_release() should not be called, also we would
have to roll back the changes in the error handling, so
instead we now allocate the cookie early and assign it on
success at the end.
CVE-2017-7979
Fixes: 1045ba77a5 ("net sched actions: Add support for user cookies")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-04-19
Two fixes for af_key:
1) Add a lock to key dump to prevent a NULL pointer dereference.
From Yuejie Shi.
2) Fix slab-out-of-bounds in parse_ipsecrequests.
From Herbert Xu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern reported that 5425077d73 ("net: ipv6: Add early demux
handler for UDP unicast") breaks udp_l3mdev_accept=0 since early
demux for IPv6 UDP was doing a generic socket lookup which does not
require an exact match. Fix this by making UDPv6 early demux match
connected sockets only.
v1->v2: Take reference to socket after match as suggested by Eric
v2->v3: Add comment before break
Fixes: 5425077d73 ("net: ipv6: Add early demux handler for UDP unicast")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using TCP FastOpen for an active session, we send one wakeup event
from tcp_finish_connect(), right before the data eventually contained in
the received SYNACK is queued to sk->sk_receive_queue.
This means that depending on machine load or luck, poll() users
might receive POLLOUT events instead of POLLIN|POLLOUT
To fix this, we need to move the call to sk->sk_state_change()
after the (optional) call to tcp_rcv_fastopen_synack()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a RST packet is processed, we send two wakeup events to interested
polling users.
First one by a sk->sk_error_report(sk) from tcp_reset(),
followed by a sk->sk_state_change(sk) from tcp_done().
Depending on machine load and luck, poll() can either return POLLERR,
or POLLIN|POLLOUT|POLLERR|POLLHUP (this happens on 99 % of the cases)
This is probably fine, but we can avoid the confusion by reordering
things so that we have more TCP fields updated before the first wakeup.
This might even allow us to remove some barriers we added in the past.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes an out-of-bounds access in seg6_validate_srh() when the
trailing data is less than sizeof(struct sr6_tlv).
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
AP/AP_VLAN modes don't accept any real 802.11 multicast data
frames, but since they do need to accept broadcast management
frames the same is currently permitted for data frames. This
opens a security problem because such frames would be decrypted
with the GTK, and could even contain unicast L3 frames.
Since the spec says that ToDS frames must always have the BSSID
as the RA (addr1), reject any other data frames.
The problem was originally reported in "Predicting, Decrypting,
and Abusing WPA2/802.11 Group Keys" at usenix
https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef
and brought to my attention by Jouni.
Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
--
Dave, I didn't want to send you a new pull request for a single
commit yet again - can you apply this one patch as is?
Signed-off-by: David S. Miller <davem@davemloft.net>
struct sock_filter_ext didn't make it into the tree and is now called
struct bpf_insn. Reword the kerneldoc comment for bpf_convert_filter()
accordingly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* connection quality monitoring with multiple thresholds
* support for FILS shared key authentication offload
* pre-CAC regulatory compliance - only ETSI allows this
* sanity check for some rate confusion that hit ChromeOS
(but nobody else uses it, evidently)
* some documentation updates
* lots of cleanups
-----BEGIN PGP SIGNATURE-----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=f4VT
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2017-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
My last pull request has been a while, we now have:
* connection quality monitoring with multiple thresholds
* support for FILS shared key authentication offload
* pre-CAC regulatory compliance - only ETSI allows this
* sanity check for some rate confusion that hit ChromeOS
(but nobody else uses it, evidently)
* some documentation updates
* lots of cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To define the outgoing port and to discover the incoming port a regular
VLAN tag is used by the LAN9303. But its VID meaning is 'special'.
This tag handler/filter depends on some hardware features which must be
enabled in the device to provide and make use of this special VLAN tag
to control the destination and the source of an ethernet packet.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When mempool_alloc() is allowed to sleep (GFP_NOIO allows
sleeping) it cannot fail.
So rpc_alloc_task() cannot fail, so rpc_new_task doesn't need
to test for failure.
Consequently rpc_new_task() cannot fail, so the callers
don't need to test.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
bad SKB accesses if the SKB was paged, which is the case
for the only driver supporting this - iwlwifi.
-----BEGIN PGP SIGNATURE-----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=r4GR
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A single fix, for the MU-MIMO monitor mode, that fixes
bad SKB accesses if the SKB was paged, which is the case
for the only driver supporting this - iwlwifi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A function in kernel/bpf/syscall.c which got a bug fix in 'net'
was moved to kernel/bpf/verifier.c in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
The window scale may be enlarged from 14 to 15 according to the itef
draft https://tools.ietf.org/html/draft-nishida-tcpm-maxwin-03.
Use the macro TCP_MAX_WSCALE to support it easily with TCP stack in
the future.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The commit ab8bc7ed86
("netfilter: remove nf_ct_is_untracked")
changed the line
if (ct && !nf_ct_is_untracked(ct) && nfct_nat(ct)) {
to
if (ct && nfct_nat(ct)) {
meanwhile, the commit 41390895e5
("netfilter: ipvs: don't check for presence of nat extension")
from ipvs-next had changed the same line to
if (ct && !nf_ct_is_untracked(ct) && (ct->status & IPS_NAT_MASK)) {
When ipvs-next got merged into nf-next, the merge resolution took
the first version, dropping the conversion of nfct_nat().
While this doesn't cause a problem at the moment, it will once we stop
adding the nat extension by default.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only "cache" needs to use ulong (its used with set_bit()), missed can use
u16. Also add build-time assertion to ensure event bits fit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If insertion of a new conntrack fails because the table is full, the kernel
searches the next buckets of the hash slot where the new connection
was supposed to be inserted at for an entry that hasn't seen traffic
in reply direction (non-assured), if it finds one, that entry is
is dropped and the new connection entry is allocated.
Allow the conntrack gc worker to also remove *assured* conntracks if
resources are low.
Do this by querying the l4 tracker, e.g. tcp connections are now dropped
if they are no longer established (e.g. in finwait).
This could be refined further, e.g. by adding 'soft' established timeout
(i.e., a timeout that is only used once we get close to resource
exhaustion).
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit 223b02d923
("netfilter: nf_conntrack: reserve two bytes for nf_ct_ext->len")
had to increase size of the extension offsets because total size of the
extensions had increased to a point where u8 did overflow.
3 years later we've managed to diet extensions a bit and we no longer
need u16. Furthermore we can now add a compile-time assertion for this
problem.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
get rid of the (now unused) nf_ct_ext_add_length define and also
rename the function to plain nf_ct_ext_add().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need to track this for inkernel helpers anymore as
NF_CT_HELPER_BUILD_BUG_ON checks do this now.
All inkernel helpers know what kind of structure they
stored in helper->data.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Userspace should not abuse the kernel to store large amounts of data,
reject requests larger than the private area can accommodate.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
add a 32 byte scratch area in the helper struct instead of relying
on variable sized helpers plus compile-time asserts to let us know
if 32 bytes aren't enough anymore.
Not having variable sized helpers will later allow to add BUILD_BUG_ON
for the total size of conntrack extensions -- the helper extension is
the only one that doesn't have a fixed size.
The (useless!) NF_CT_HELPER_BUILD_BUG_ON(0); are added so that in case
someone adds a new helper and copy-pastes from one that doesn't store
private data at least some indication that this macro should be used
somehow is there...
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
By default the kernel emits all ctnetlink events for a connection.
This allows to select the types of events to generate.
This can be used to e.g. only send DESTROY events but no NEW/UPDATE ones
and will work even if sysctl net.netfilter.nf_conntrack_events is set to 0.
This was already possible via iptables' CT target, but the nft version has
the advantage that it can also be used with already-established conntracks.
The added nf_ct_is_template() check isn't a bug fix as we only support
mark and labels (and unlike ecache the conntrack core doesn't copy those).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If esp*_offload module is loaded, outbound packets take the
GSO code path, being encapsulated at layer 3, but encrypted
in layer 2. validate_xmit_xfrm calls esp*_xmit for that.
esp*_xmit was wrongfully detecting these packets as going
through hardware crypto offload, while in fact they should
be encrypted in software, causing plaintext leakage to
the network, and also dropping at the receiver side.
Perform the encryption in esp*_xmit, if the SA doesn't have
a hardware offload_handle.
Also, align esp6 code to esp4 logic.
Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2 ("esp6: Reorganize esp_output")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The check for xo being null is incorrect, currently it is checking
for non-null, it should be checking for null.
Detected with CoverityScan, CID#1429349 ("Dereference after null check")
Fixes: 7862b4058b ("esp: Add gso handlers for esp4 and esp6")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section. Of course, that is not the
case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.
However, there is a phrase for this, namely "type safety". This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
Dumazet, in order to help people familiar with the old name find
the new one. ]
Acked-by: David Rientjes <rientjes@google.com>
This patch is to fix the replay attack issue for strreset asoc requests.
When a duplicated strreset asoc request is received, reply it with bad
seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the
result saved in asoc if it's seqno >= asoc->strreset_inseq - 2.
But note that if the result saved in asoc is performed, the sender's next
tsn and receiver's next tsn for the response chunk should be set. It's
safe to get them from asoc. Because if it's changed, which means the peer
has received the response already, the new response with wrong tsn won't
be accepted by peer.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to fix the replay attack issue for strreset and addstrm in
requests.
When a duplicated strreset in or addstrm in request is received, reply it
with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with
the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2.
For strreset in or addstrm in request, if the receiver side processes it
successfully, a strreset out or addstrm out request(as a response for that
request) will be sent back to peer. reconf_time will retransmit the out
request even if it's lost.
So when receiving a duplicated strreset in or addstrm in request and it's
result was performed, it shouldn't reply this request, but drop it instead.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now sctp stream reconf will process a request again even if it's seqno is
less than asoc->strreset_inseq.
If one request has been done successfully and some data chunks have been
accepted and then a duplicated strreset out request comes, the streamin's
ssn will be cleared. It will cause that stream will never receive chunks
any more because of unsynchronized ssn. It allows a replay attack.
A similar issue also exists when processing addstrm out requests. It will
cause more extra streams being added.
This patch is to fix it by saving the last 2 results into asoc. When a
duplicated strreset out or addstrm out request is received, reply it with
bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the
result saved in asoc if it's seqno >= asoc->strreset_inseq - 2.
Note that it saves last 2 results instead of only last 1 result, because
two requests can be sent together in one chunk.
And note that when receiving a duplicated request, the receiver side will
still reply it even if the peer has received the response. It's safe, As
the response will be dropped by the peer.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rate_flg is of type 'enum nl80211_attrs', however it is assigned with
'enum nl80211_rate_info' values. Change the type of rate_flg accordingly.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_chandef_create() expects an 'enum nl80211_channel_type' as
channel type however in ieee80211_sta_join_ibss()
NL80211_CHAN_WIDTH_20_NOHT is passed in two occasions, which is of
the enum type 'nl80211_chan_width'. Change the value to NL80211_CHAN_NO_HT
(20 MHz, non-HT channel) of the channel type enum.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_amsdu_copy_frag intentionally initializes a pointer to
array[-1] to increment it later to valid values. clang rightfully
generates an array-bounds warning on the initialization statement.
Initialize the pointer to array[0] and change the algorithm from
increment before to increment after consume.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In addition to keeping monitor interfaces on the regular list of
interfaces, keep those that are up and not in cooked mode on a
separate list. This saves having to iterate all interfaces when
delivering to monitor interfaces.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For multi-scheduled scan support in subsequent patch a request id
will be added. This patch add this request id to the scheduled
scan event messages. For now the request id will always be zero.
With multi-scheduled scan its value will inform user-space to which
scan the event relates.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The parsing of sadb_x_ipsecrequest is broken in a number of ways.
First of all we're not verifying sadb_x_ipsecrequest_len. This
is needed when the structure carries addresses at the end. Worse
we don't even look at the length when we parse those optional
addresses.
The migration code had similar parsing code that's better but
it also has some deficiencies. The length is overcounted first
of all as it includes the header itself. It also fails to check
the length before dereferencing the sa_family field.
This patch fixes those problems in parse_sockaddr_pair and then
uses it in parse_ipsecrequest.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse
for doit functions that call it directly.
This is the first step to using extended error reporting in rtnetlink.
>From here individual subsystems can be updated to set netlink_ext_ack as
needed.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 07b26c9454 ("gso: Support partial splitting at the frag_list
pointer") assumes that all SKBs in a frag_list (except maybe the last
one) contain the same amount of GSO payload.
This assumption is not always correct, resulting in the following
warning message in the log:
skb_segment: too many frags
For example, mlx5 driver in Striding RQ mode creates some RX SKBs with
one frag, and some with 2 frags.
After GRO, the frag_list SKBs end up having different amounts of payload.
If this frag_list SKB is then forwarded, the aforementioned assumption
is violated.
Validate the assumption, and fall back to software GSO if it not true.
Fixes: 07b26c9454 ("gso: Support partial splitting at the frag_list pointer")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when processing strreset out responses, it gets outreq->list_of_streams
only when result is performed. But if result is not performed, str_p will
be NULL. It will cause panic in sctp_ulpevent_make_stream_reset_event if
nums is not 0.
This patch is to fix it by getting outreq->list_of_streams earlier, and
also to improve some codes for the strreset inreq process.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF helper functions get_socket_cookie and get_socket_uid can be
used for network traffic classifications, among others. Expose
them also to programs of type BPF_PROG_TYPE_CGROUP_SKB. As of
commit 8f917bba00 ("bpf: pass sk to helper functions") the
required skb->sk function is available at both cgroup bpf ingress
and egress hooks. With these two new helper, cg_skb_func_proto is
effectively the same as sk_filter_func_proto.
Change since V1:
Instead of add the helper to cg_skb_func_proto, redirect the
cg_skb_func_proto to sk_filter_func_proto since all helper function
in sk_filter_func_proto are applicable to cg_skb_func_proto now.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We lack a saddr check for ::1. This causes security issues e.g. with acls
permitting connections from ::1 because of assumption that these originate
from local machine.
Assuming a source address of ::1 is local seems reasonable.
RFC4291 doesn't allow such a source address either, so drop such packets.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-04-14
Here's the main batch of Bluetooth & 802.15.4 patches for the 4.12
kernel.
- Many fixes to 6LoWPAN, in particular for BLE
- New CA8210 IEEE 802.15.4 device driver (accounting for most of the
lines of code added in this pull request)
- Added Nokia Bluetooth (UART) HCI driver
- Some serdev & TTY changes that are dependencies for the Nokia
driver (with acks from relevant maintainers and an agreement that
these come through the bluetooth tree)
- Support for new Intel Bluetooth device
- Various other minor cleanups/fixes here and there
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't assume that server is sane and won't return more data than
asked for.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Recently we added support for SW fdbs to take over HW ones, but that
results in changing a user-visible fdb flag thus we need to send a
notification, also it's consistent with how HW takes over SW entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct kcm_clone only contains fd, and kcm_clone() only
writes this struct, so there is no need to copy it from user.
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since 3.12 it has been possible to configure the default queuing
discipline via sysctl. This patch adds ability to configure the
default queue discipline in kernel configuration. This is useful for
environments where configuring the value from userspace is difficult
to manage.
The default is still the same as before (pfifo_fast) and it is
possible to change after kernel init with sysctl. This is similar
to how TCP congestion control works.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MTU overhead calculation in L2TP device set-up
merged via commit b784e7ebfc
needs to be adjusted to lock the tunnel socket while
referencing the sub-data structures to derive the
socket's IP overhead.
Reported-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: R. Parameswaran <rparames@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller reported a use-after-free in ip_recv_error at line
info->ipi_ifindex = skb->dev->ifindex;
This function is called on dequeue from the error queue, at which
point the device pointer may no longer be valid.
Save ifindex on enqueue in __skb_complete_tx_timestamp, when the
pointer is valid or NULL. Store it in temporary storage skb->cb.
It is safe to reference skb->dev here, as called from device drivers
or dev_queue_xmit. The exception is when called from tcp_ack_tstamp;
in that case it is NULL and ifindex is set to 0 (invalid).
Do not return a pktinfo cmsg if ifindex is 0. This maintains the
current behavior of not returning a cmsg if skb->dev was NULL.
On dequeue, the ipv4 path will cast from sock_exterr_skb to
in_pktinfo. Both have ifindex as their first element, so no explicit
conversion is needed. This is by design, introduced in commit
0b922b7a82 ("net: original ingress device index in PKTINFO"). For
ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo.
Fixes: 829ae9d611 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit 87e9f03159
("ipv4: fix a potential deadlock in mcast getsockopt() path"),
there is a deadlock scenario for IP_ROUTER_ALERT too:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(sk_lock-AF_INET);
lock(rtnl_mutex);
lock(sk_lock-AF_INET);
Fix this by always locking RTNL first on all setsockopt() paths.
Note, after this patch ip_ra_lock is no longer needed either.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is
set to 1, gratuitous arp requests are sent when the device is brought up.
The same is expected when ndisc_notify is set to 1 (per ndisc_notify in
Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP
event; add it.
Fixes: 5cb04436ee ("ipv6: add knob to send unsolicited ND on link-layer address change")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves as is the legacy DSA code from dsa.c to legacy.c,
except the few shared symbols which remain in dsa.c.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function no longer does anything. The is only a single caller of
register_sysctl_root when semantically there should be two. Remove
this function so that if someone decides this functionality is needed
again it will be obvious all of the callers of setup_sysctl_set need
to be audited and modified appropriately.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is now obsolete and always returns false.
This change has no effect on generated code.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
resurrect an old patch from Pablo Neira to remove the untracked objects.
Currently, there are four possible states of an skb wrt. conntrack.
1. No conntrack attached, ct is NULL.
2. Normal (kmem cache allocated) ct attached.
3. a template (kmalloc'd), not in any hash tables at any point in time
4. the 'untracked' conntrack, a percpu nf_conn object, tagged via
IPS_UNTRACKED_BIT in ct->status.
Untracked is supposed to be identical to case 1. It exists only
so users can check
-m conntrack --ctstate UNTRACKED vs.
-m conntrack --ctstate INVALID
e.g. attempts to set connmark on INVALID or UNTRACKED conntracks is
supposed to be a no-op.
Thus currently we need to check
ct == NULL || nf_ct_is_untracked(ct)
in a lot of places in order to avoid altering untracked objects.
The other consequence of the percpu untracked object is that all
-j NOTRACK (and, later, kfree_skb of such skbs) result in an atomic op
(inc/dec the untracked conntracks refcount).
This adds a new kernel-private ctinfo state, IP_CT_UNTRACKED, to
make the distinction instead.
The (few) places that care about packet invalid (ct is NULL) vs.
packet untracked now need to test ct == NULL vs. ctinfo == IP_CT_UNTRACKED,
but all other places can omit the nf_ct_is_untracked() check.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
1. Remove single !events condition check to deliver the missed event
even though there is no new event happened.
Consider this case:
1) nf_ct_deliver_cached_events is invoked at the first time, the
event is failed to deliver, then the missed is set.
2) nf_ct_deliver_cached_events is invoked again, but there is no
any new event happened.
The missed event is lost really.
It would try to send the missed event again after remove this check.
And it is ok if there is no missed event because the latter check
!((events | missed) & e->ctmask) could avoid it.
2. Correct the return value check of notify->fcn.
When send the event successfully, it returns 0, not postive value.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The __nf_nat_alloc_null_binding invokes nf_nat_setup_info which may
return NF_DROP when memory is exhausted, so convert NF_DROP to -ENOMEM
to make ctnetlink happy. Or ctnetlink_setup_nat treats it as a success
when one error NF_DROP happens actully.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
Second Round of IPVS Updates for v4.12
please consider these clean-ups and enhancements to IPVS for v4.12.
* Removal unused variable
* Use kzalloc where appropriate
* More efficient detection of presence of NAT extension
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
net/netfilter/ipvs/ip_vs_ftp.c
There are no in-tree callers.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If "scope_len" is sizeof(scope_id) then we would put the NUL terminator
one space beyond the end of the buffer.
Fixes: b1a951fe46 ("net/utils: generic inet_pton_with_scope helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Missing TCP header sanity check in TCPMSS target, from Eric Dumazet.
2) Incorrect event message type for related conntracks created via
ctnetlink, from Liping Zhang.
3) Fix incorrect rcu locking when handling helpers from ctnetlink,
from Gao feng.
4) Fix missing rcu locking when updating helper, from Liping Zhang.
5) Fix missing read_lock_bh when iterating over list of device addresses
from TPROXY and redirect, also from Liping.
6) Fix crash when trying to dump expectations from conntrack with no
helper via ctnetlink, from Liping.
7) Missing RCU protection to expecation list update given ctnetlink
iterates over the list under rcu read lock side, from Liping too.
8) Don't dump autogenerated seed in nft_hash to userspace, this is
very confusing to the user, again from Liping.
9) Fix wrong conntrack netns module refcount in ipt_CLUSTERIP,
from Gao feng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On IPsec hardware offloading, we already get a secpath with
valid state attached when the packet enters the GRO handlers.
So check for hardware offload and skip the state lookup in this
case.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Both esp4 and esp6 used to assume that the SKB payload is encrypted
and therefore the inner_network and inner_transport offsets are
not relevant.
When doing crypto offload in the NIC, this is no longer the case
and the NIC driver needs these offsets so it can do TX TCP checksum
offloading.
This patch sets the inner_network and inner_transport members of
the SKB, as well as encapsulation, to reflect the actual positions
of these headers, and removes them only once encryption is done
on the payload.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we do IPsec offloading, we need a fallback for
packets that were targeted to be IPsec offloaded but
rerouted to a device that does not support IPsec offload.
For that we add a function that checks the offloading
features of the sending device and and flags the
requirement of a fallback before it calls the IPsec
output function. The IPsec output function adds the IPsec
trailer and does encryption if needed.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need a fallback algorithm for crypto offloading to a NIC.
This is because packets can be rerouted to other NICs that
don't support crypto offloading. The fallback is going to be
implemented at layer2 where we know the final output device
but can't handle asynchronous returns fron the crypto layer.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds functions that handles IPsec sequence
numbers for GSO segments and TSO offloading. We need
to calculate and update the sequence numbers based
on the segments that GSO/TSO will generate. We need
this to keep software and hardware sequence number
counter in sync.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch extends the xfrm_type by an encap function pointer
and implements esp4_gso_encap and esp6_gso_encap. These functions
doing the basic esp encapsulation for a GSO packet. In case the
GSO packet needs to be segmented in software, we add gso_segment
functions. This codepath is going to be used on esp hardware
offloads.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need a fallback for ESP at layer 2, so split esp6_output
into generic functions that can be used at layer 3 and layer 2
and use them in esp_output. We also add esp6_xmit which is
used for the layer 2 fallback.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need a fallback for ESP at layer 2, so split esp_output
into generic functions that can be used at layer 3 and layer 2
and use them in esp_output. We also add esp_xmit which is
used for the layer 2 fallback.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We are going to export the ipv4 and the ipv6
version of esp_input_done2. They are not static
anymore and can't have the same name. So rename
the ipv6 version to esp6_input_done2.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.
Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds a gso_segment and xmit callback for the
xfrm_mode and implement these functions for tunnel and
transport mode.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We add a struct xfrm_type_offload so that we have the offloaded
codepath separated to the non offloaded codepath. With this the
non offloade and the offloaded codepath can coexist.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The protonet pointer will unconditionally be rewritten, so just do the
needed assignment first.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Current codes invoke wrongly nf_ct_netns_get in the destroy routine,
it should use nf_ct_netns_put, not nf_ct_netns_get.
It could cause some modules could not be unloaded.
Fixes: ecb2421b5d ("netfilter: add and use nf_ct_netns_get/put")
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This can prevent the nft utility from printing out the auto generated
seed to the user, which is unnecessary and confusing.
Fixes: cb1b69b0b1 ("netfilter: nf_tables: add hash expression")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
__nf_nat_decode_session is called from nf_nat_decode_session as decodefn.
before calling decodefn, it already set rcu_read_lock. so rcu_read_lock in
__nf_nat_decode_session can be removed.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pass the new extended ACK reporting struct to all of the generic
netlink parsing functions. For now, pass NULL in almost all callers
(except for some in the core.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have extended error reporting and a new message format for
netlink ACK messages, also extend this to be able to return arbitrary
cookie data on success.
This will allow, for example, nl80211 to not send an extra message for
cookies identifying newly created objects, but return those directly
in the ACK message.
The cookie data size is currently limited to 20 bytes (since Jamal
talked about using SHA1 for identifiers.)
Thanks to Jamal Hadi Salim for bringing up this idea during the
discussions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the extended ACK reporting struct down from generic netlink to
the families, using the existing struct genl_info for simplicity.
Also add support to set the extended ACK information from generic
netlink users.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the base infrastructure and UAPI for netlink extended ACK
reporting. All "manual" calls to netlink_ack() pass NULL for now and
thus don't get extended ACK reporting.
Big thanks goes to Pablo Neira Ayuso for not only bringing up the
whole topic at netconf (again) but also coming up with the nlattr
passing trick and various other ideas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Don't get the metric RTAX_ADVMSS of dst.
There are two reasons.
1) Its caller dst_metric_advmss has already invoke dst_metric_advmss
before invoke default_advmss.
2) The ipv4_default_advmss is used to get the default mss, it should
not try to get the metric like ip6_default_advmss.
2. Use sizeof(tcphdr)+sizeof(iphdr) instead of literal 40.
3. Define one new macro IPV4_MAX_PMTU instead of 65535 according to
RFC 2675, section 5.1.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_CHANGEUPPER is an internal event; do not generate userspace
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CHANGELOWERSTATE is an internal event; do not generate userspace
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PRECHANGEUPPER is an internal event; do not generate userspace
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing the master device for a link generates many messages; the one
generated for POST_TYPE_CHANGE is redundant:
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default
link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default
link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff
Remove POST_TYPE_CHANGE from the list of notifiers that generate
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing hardware address generates redundant messages:
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff
Do not send a notification for the CHANGEADDR notifier.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_UDP_TUNNEL_PUSH_INFO is an internal notifier; nothing userspace
can do so don't generate a netlink notification.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing MTU on a link currently causes 3 messages to be sent to userspace:
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1490 qdisc noqueue state UNKNOWN group default
link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff
Remove the messages sent for PRE_CHANGE_MTU and CHANGE_MTU netdev events.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two bugs in the follow-MAC code:
* it treats the radiotap header as the 802.11 header
(therefore it can't possibly work)
* it doesn't verify that the skb data it accesses is actually
present in the header, which is mitigated by the first point
Fix this by moving all of this out into a separate function.
This function copies the data it needs using skb_copy_bits()
to make sure it can be accessed if it's paged, and offsets
that by the possibly present vendor radiotap header.
This also makes all those conditions more readable.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the code to have common code for changing monitor
options when adding and changing virtual interfaces. This
will make it easier to add BPF filters to both paths. Note
that this code carefully checks the error conditions first
and only then applies the changes, to guarantee atomicity.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the parsing of monitor flags and the MU-MIMO options.
This will allow adding more things cleanly in the future and
also allows setting the latter already when creating a monitor
interface.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead passing both flags, which can be NULL, and vif_params,
which are never NULL, move the flags into the vif_params and
use BIT(0), which is invalid from userspace, to indicate that
the flags were changed.
While updating all drivers, fix a small bug in wil6210 where
it was setting the flags to 0 instead of leaving them unchanged.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The MU-MIMO monitor follow functionality is broken because it
doesn't clear the MU-MIMO owner even if both follow features
are disabled. Fix that, and while at it move the code into a
new helper function. Call this also when creating a new monitor
interface to prepare for an upcoming cfg80211 change allowing
that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When changing monitor parameters, not setting the MU-MIMO attributes
should mean that they're not changed - it's documented that to turn
the feature off it's necessary to set all-zero group membership and
an invalid follow-address. This isn't implemented.
Fix this by making the parameters pointers, stop reusing the macaddr
struct member, and documenting that NULL pointers mean unchanged.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of dropping such frames only when removing the
monitor info, drop them earlier (keeping the warning)
and simplify removing monitor info. While at it, make
that function return void.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When clang detects a non-boolean constant in a logical operation it
generates a 'constant-logical-operand' warning. In
ieee80211_try_rate_control_ops_get() the result of strlen(<const str>)
is used in a logical operation, clang resolves the expression to an
(integer) constant at compile time when clang's builtin strlen function
is used.
Change the condition to check for strlen() > 0 to make the constant
operand boolean and thus avoid the warning.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The IPv6 stack needs to send and receive Neighbor Discovery
messages. Remove the IFF_POINTOPOINT flag.
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Make netdev queue packets if we run out of credits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Consolidate code sending data to LE CoC channels and adds proper
accounting of packets sent, the remaining credits and how many packets
are queued.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Rely on netif_wake_queue and netif_stop_queue to flow control when
transmit resources are unavailable.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since l2cap_chan_send will now queue the packets there is no point in
checking the credits anymore.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is no point in setting IFF_NO_QUEUE should already have taken
care of setting it if tx_queue_len is not set, in fact this may
actually disable queue for interfaces that require it and do set
tx_queue_len.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Just keep queueing them into TX queue since the caller might just have
to do the same and there is no impact in adding another packet to the
TX queue even if there aren't any credits to transmit them.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This makes should make it more clear why a packet is being dropped.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
During chan_recv_cb there is already a peer lookup which can be passed
to recv_pkt directly instead of the channel.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
A status field in the skb_cb struct was storing a channel status
based on channel suspend/resume events. This stored status was
then used to return EAGAIN if there were packet sending issues
in snd_pkt().
The issue is that the skb has been freed by the time the callback
to 6lowpan's suspend/resume was called. So, this generates a
"use after free" issue that was noticed while running kernel tests
with KASAN debug enabled.
Let's eliminate the status field entirely as we can use the channel
tx_credits to indicate whether we should return EAGAIN when handling
packets.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When adding 6lowpan devices very rapidly we sometimes see a crash:
[23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1
[23122.315400] Hardware name: HiKey Development Board (DT)
[23122.320623] task: ffff800075443080 task.stack: ffff800075484000
[23122.326551] PC is at expire_timers+0x70/0x150
[23122.330907] LR is at run_timer_softirq+0xa0/0x1a0
[23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5
This was due to add_peer_chan() unconditionally initializing the
lowpan_btle_dev->notify_peers delayed work structure, even if the
lowpan_btle_dev passed into add_peer_chan() had previously been
initialized.
Normally, this would go unnoticed as the delayed work timer is set for
100 msec, however when calling add_peer_chan() faster than 100 msec it
clears out a previously queued delay work causing the crash above.
To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed
in so that it only performs the delay work initialization when needed.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The data from peer->chan->dst is not being copied to peer_addr, the
current code just updates the pointer and not the contents of what
it points to. Fix this with the intended assignment.
Detected by CoverityScan, CID#1422111 ("Parse warning
(PW.PARAM_SET_BUT_NOT_USED)")
Fixes: fb6f2f606ce8 ("6lowpan: Fix IID format for Bluetooth")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use the initial connection interval recommended in Bluetooth
Specification v4.2 (30ms - 50ms).
Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Variable err is being initialized to zero and then later being
set to the error return from the call to hci_req_run_skb; hence
we can remove the redundant initialization to zero.
Also on two occassions err is not being set from the error return
from the call to hci_req_run_skb, so add these missing assignments.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is a race condition between a thread calling bt_accept_dequeue()
and a different thread calling bt_accept_unlink(). Protection against
concurrency is implemented using sk locking. However, sk locking causes
serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads.
This serialisation can cause bt_accept_dequeue() to obtain the sk from the
parent list but becomes blocked waiting for the sk lock held by the
bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread
releases the sk lock unblocking bt_accept_dequeue() which potentially runs
bt_accept_unlink() again on the same sk causing a crash. The attempt to
double unlink the same sk from the parent list can cause a NULL pointer
dereference crash due to bt_sk(sk)->parent becoming NULL on the first
unlink, followed by the second unlink trying to execute
bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes.
When sk is in the parent list, bt_sk(sk)->parent will be not be NULL.
When sk is removed from the parent list, bt_sk(sk)->parent is set to
NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being
NULL to ensure that sk is still in the parent list after the sk lock has
been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as
being NULL then restart the loop so that the loop variables are refreshed
to use the latest values. This is necessary as list_for_each_entry_safe()
is not thread safe so causing a risk of an infinite loop occurring as sk
could point to itself.
In addition, in bt_accept_dequeue() increase the sk reference count to
protect against early freeing of sk. Early freeing can be possible if the
bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill()
functions before bt_accept_dequeue() gets the sk lock.
For test purposes, the probability of failure can be increased by putting
a msleep of 1 second in bt_accept_dequeue() between getting the sk and
waiting for the sk lock. This exposes the fact that the loop
list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from
threads that unlink sk from the list in parallel with the loop which can
cause sk to become stale within the loop.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is a small risk that bt_accept_unlink() runs concurrently with
bt_accept_enqueue() on the same socket. This scenario could potentially
lead to a NULL pointer dereference of the socket's parent member because
the socket can be on the list but the socket's parent member is not yet
updated by bt_accept_enqueue().
Therefore, add socket locking inside bt_accept_enqueue() so that the
socket is added to the list AND the parent's socket address is set in the
socket's parent member. The socket locking ensures that the socket is on
the list with a valid non-NULL parent member.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
According to RFC 7668 U/L bit shall not be used:
https://wiki.tools.ietf.org/html/rfc7668#section-3.2.2 [Page 10]:
In the figure, letter 'b' represents a bit from the
Bluetooth device address, copied as is without any changes on any
bit. This means that no bit in the IID indicates whether the
underlying Bluetooth device address is public or random.
|0 1|1 3|3 4|4 6|
|0 5|6 1|2 7|8 3|
+----------------+----------------+----------------+----------------+
|bbbbbbbbbbbbbbbb|bbbbbbbb11111111|11111110bbbbbbbb|bbbbbbbbbbbbbbbb|
+----------------+----------------+----------------+----------------+
Because of this the code cannot figure out the address type from the IP
address anymore thus it makes no sense to use peer_lookup_ba as it needs
the peer address type.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This allow technologies such as Bluetooth to use its native lladdr which
is eui48 instead of eui64 which was expected by functions like
lowpan_header_decompress and lowpan_header_compress.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for 48 bit 6LoWPAN address length
autoconfiguration which is the case for BTLE 6LoWPAN.
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The skb->pkt_type need to be set by L2, but on 6LoWPAN there exists L2
e.g. BTLE which doesn't has multicast addressing. If it's a multicast or
not is detected by IPHC headers multicast bit. The IPv6 layer will
evaluate this pkt_type, so we force set this type while uncompressing.
Should be okay for 802.15.4 as well.
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Set MAC address length according to the 6LoWPAN link layer in use.
Bluetooth Low Energy uses 48 bit addressing while IEEE802.15.4 uses
64 bits.
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Set BTLE MAC addresses that are 6 bytes long and not 8 bytes
that are used in other places with 6lowpan.
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
A driver may use build_skb() for received packets.
These SKBs then have a head_frag.
Since commit d7e8883cfc ("net: make GRO aware of
skb->head_frag"), GRO may build frag_list SKBs out of
head_frag received SKBs.
In such a case, the chained SKBs end up with a head_frag.
Commit 07b26c9454 ("gso: Support partial splitting at
the frag_list pointer") adds partial segmentation of frag_list
SKB chains into individual SKBs.
However, this is not done if the chained SKBs have any
linear part, because the device may not be able to DMA
the private linear buffer.
A chained frag_list SKB with head_frag is wrongfully
detected in this case as having a private linear part
and thus falls back to software GSO, while in fact the
linear part is backed by a DMA page just like any other frag.
This causes low performance when forwarding those packets
that were built with build_skb()
Allow partial segmentation at the frag_list pointer for
chained SKBs with head_frag.
Note that such SKBs can only be created by GRO, when applied
to received packets with head_frag.
Also note that this change only affects the data path that
performs the partial segmentation at frag_list pointer, and
not any of the other more common data paths.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
addrconf_ifdown() removes elements from the idev->addr_list without
holding the idev->lock.
If this happens while the loop in __ipv6_dev_get_saddr() is handling the
same element, that function ends up in an infinite loop:
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719]
Call Trace:
ipv6_get_saddr_eval+0x13c/0x3a0
__ipv6_dev_get_saddr+0xe4/0x1f0
ipv6_dev_get_saddr+0x1b4/0x204
ip6_dst_lookup_tail+0xcc/0x27c
ip6_dst_lookup_flow+0x38/0x80
udpv6_sendmsg+0x708/0xba8
sock_sendmsg+0x18/0x30
SyS_sendto+0xb8/0xf8
syscall_common+0x34/0x58
Fixes: 6a923934c3 (Revert "ipv6: Revert optional address flusing on ifdown.")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_find() and l2tp_tunnel_find_nth() don't modify "net".
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make l2tp_pernet()'s parameter constant, so that l2tp_session_get*() can
declare their "net" variable as "const".
Also constify "ifname" in l2tp_session_get_by_ifname().
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since dev_change_xdp_fd() is only used in rtnetlink, which must
be built-in, there's no reason to export dev_change_xdp_fd().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc specifies IB_SEND_INLINE for IB_WR_SEND ib_post_send calls, but
provides a mapped buffer to be sent. This is inconsistent, since
IB_SEND_INLINE works without mapped buffer. Problem has not been
detected in the past, because tests had been limited to Connect X3 cards
from Mellanox, whose mlx4 driver just ignored the IB_SEND_INLINE flag.
For now, the IB_SEND_INLINE flag is removed.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure sockets never accepted are removed cleanly.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unhash is already called in sock_put_work. Remove the second call.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
State SMC_CLOSED should be reached only, if ConnClosed has been sent to
the peer. If ConnClosed is received from the peer, a socket with
shutdown SHUT_WR done, switches errorneously to state SMC_CLOSED, which
means the peer socket is dangling. The local SMC socket is supposed to
switch to state APPFINCLOSEWAIT to make sure smc_close_final() is called
during socket close.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several state changes occur during SMC socket closing. Currently
state changes triggered locally occur in process context with
lock_sock() taken while state changes triggered by peer occur in
tasklet context with bh_lock_sock() taken. bh_lock_sock() does not
wait till a lock_sock(() task in process context is finished. This
may lead to races in socket state transitions resulting in dangling
SMC-sockets, or it may lead to duplicate SMC socket freeing.
This patch introduces a closing worker to run all state changes under
lock_sock().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wake up reading file descriptors for a closing socket as well, otherwise
some socket applications may stall.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If peer indicates write_blocked, the cursor state of the received data
should be send to the peer immediately (in smc_tx_consumer_update()).
Afterwards the write_blocked indicator is cleared.
If there is no free slot for another write request, sending is postponed
to worker smc_tx_work, and the write_blocked indicator is not cleared.
Therefore another clearing check is needed in smc_tx_work().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC requires an active ib port on the RoCE device.
smc_pnet_find_roce_resource() determines the matching RoCE device port
according to the configured PNET table. Do not return the found
RoCE device port, if it is not flagged active.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The global event handler is created only, if the ib_device has already
been used by at least one link group. It is guaranteed that there exists
the corresponding entry in the smc_ib_devices list. Get rid of this
superfluous check.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes an outdated comment.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter reported a kernel oops when executing the following command:
$ ip link add name test type bridge vlan_default_pvid 1
[13634.939408] BUG: unable to handle kernel NULL pointer dereference at
0000000000000190
[13634.939436] IP: __vlan_add+0x73/0x5f0
[...]
[13634.939783] Call Trace:
[13634.939791] ? pcpu_next_unpop+0x3b/0x50
[13634.939801] ? pcpu_alloc+0x3d2/0x680
[13634.939810] ? br_vlan_add+0x135/0x1b0
[13634.939820] ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0
[13634.939834] ? br_changelink+0x120/0x4e0
[13634.939844] ? br_dev_newlink+0x50/0x70
[13634.939854] ? rtnl_newlink+0x5f5/0x8a0
[13634.939864] ? rtnl_newlink+0x176/0x8a0
[13634.939874] ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.939886] ? rtnetlink_rcv_msg+0xe1/0x220
[13634.939896] ? lookup_fast+0x52/0x370
[13634.939905] ? rtnl_newlink+0x8a0/0x8a0
[13634.939915] ? netlink_rcv_skb+0xa1/0xc0
[13634.939925] ? rtnetlink_rcv+0x24/0x30
[13634.939934] ? netlink_unicast+0x177/0x220
[13634.939944] ? netlink_sendmsg+0x2fe/0x3b0
[13634.939954] ? _copy_from_user+0x39/0x40
[13634.939964] ? sock_sendmsg+0x30/0x40
[13634.940159] ? ___sys_sendmsg+0x29d/0x2b0
[13634.940326] ? __alloc_pages_nodemask+0xdf/0x230
[13634.940478] ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.940592] ? mem_cgroup_try_charge+0x76/0x1a0
[13634.940701] ? __handle_mm_fault+0xdb9/0x10b0
[13634.940809] ? __sys_sendmsg+0x51/0x90
[13634.940917] ? entry_SYSCALL_64_fastpath+0x1e/0xad
The problem is that the bridge's VLAN group is created after setting the
default PVID, when registering the netdevice and executing its
ndo_init().
Fix this by changing the order of both operations, so that
br_changelink() is only processed after the netdevice is registered,
when the VLAN group is already initialized.
Fixes: b6677449df ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Peter V. Saveliev <peter@svinota.eu>
Tested-by: Peter V. Saveliev <peter@svinota.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the bridge driver implements an ndo_init(), it was missing a
symmetric ndo_uninit(), causing the different de-initialization
operations to be scattered around its dellink() and destructor().
Implement a symmetric ndo_uninit() and remove the overlapping operations
from its dellink() and destructor().
This is a prerequisite for the next patch, as it allows us to have a
proper cleanup upon changelink() failure during the bridge's newlink().
Fixes: b6677449df ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF helper functions access socket fields through skb->sk. This is not
set in ingress cgroup and socket filters. The association is only made
in skb_set_owner_r once the filter has accepted the packet. Sk is
available as socket lookup has taken place.
Temporarily set skb->sk to sk in these cases.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the return value check which testing the wrong variable
in devlink_dpipe_header_put().
Fixes: 1555d204e7 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to have struct bpf_prog_type_list since
it just contains a list_head, the type, and the ops
pointer. Since the types are densely packed and not
actually dynamically registered, it's much easier and
smaller to have an array of type->ops pointer. Also
initialize this array statically to remove code needed
to initialize it.
In order to save duplicating the list, move it to a new
header file and include it in the places needing it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no point in checking for duplicate sessions at the beginning of
l2tp_nl_cmd_session_create(); the ->session_create() callbacks already
return -EEXIST when the session already exists.
Furthermore, even if l2tp_session_find() returns NULL, a new session
might be created right after the test. So relying on ->session_create()
to avoid duplicate session is the only sane behaviour.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-04-11
1) Remove unused field from struct xfrm_mgr.
2) Code size optimizations for the xfrm prefix hash and
address match.
3) Branch optimization for addr4_match.
All patches from Alexey Dobriyan.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not safe for one thread to modify the ->flags
of another thread as there is no locking that can protect
the update.
So tsk_restore_flags(), which takes a task pointer and modifies
the flags, is an invitation to do the wrong thing.
All current users pass "current" as the task, so no developers have
accepted that invitation. It would be best to ensure it remains
that way.
So rename tsk_restore_flags() to current_restore_flags() and don't
pass in a task_struct pointer. Always operate on current->flags.
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes the xfrm_user code to use the actual array size
rather than the hard-coded CRYPTO_MAX_ALG_NAME length. This is
because the array size is fixed at 64 bytes while we want to increase
the in-kernel CRYPTO_MAX_ALG_NAME value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
This reverts commit def12888c1.
As per discussion between Roopa Prabhu and David Ahern, it is
advisable that we instead have the code collect the setlink triggered
events into a bitmask emitted in the IFLA_EVENT netlink attribute.
Signed-off-by: David S. Miller <davem@davemloft.net>
We should use proper RCU list APIs to manipulate help->expectations,
as we can dump the conntrack's expectations via nfnetlink, i.e. in
ctnetlink_exp_ct_dump_table(), where only rcu_read_lock is acquired.
So for list traversal, use hlist_for_each_entry_rcu; for list add/del,
use hlist_add_head_rcu and hlist_del_rcu.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For IPCTNL_MSG_EXP_GET, if the CTA_EXPECT_MASTER attr is specified, then
the NLM_F_DUMP request will dump the expectations related to this
connection tracking.
But we forget to check whether the conntrack has nf_conn_help or not,
so if nfct_help(ct) is NULL, oops will happen:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: ctnetlink_exp_ct_dump_table+0xf9/0x1e0 [nf_conntrack_netlink]
Call Trace:
? ctnetlink_exp_ct_dump_table+0x75/0x1e0 [nf_conntrack_netlink]
netlink_dump+0x124/0x2a0
__netlink_dump_start+0x161/0x190
ctnetlink_dump_exp_ct+0x16c/0x1bc [nf_conntrack_netlink]
? ctnetlink_exp_fill_info.constprop.33+0xf0/0xf0 [nf_conntrack_netlink]
? ctnetlink_glue_seqadj+0x20/0x20 [nf_conntrack_netlink]
ctnetlink_get_expect+0x32e/0x370 [nf_conntrack_netlink]
? debug_lockdep_rcu_enabled+0x1d/0x20
nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink]
? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink]
[...]
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
inet6_dev->addr_list is protected by inet6_dev->lock, so only using
rcu_read_lock is not enough, we should acquire read_lock_bh(&idev->lock)
before the inet6_dev->addr_list traversal.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
One CPU is doing ctnetlink_change_helper(), while another CPU is doing
unhelp() at the same time. So even if help->helper is not NULL at first,
the later statement strcmp(help->helper->name, ...) may still access
the NULL pointer.
So we must use rcu_read_lock and rcu_dereference to avoid such _bad_
thing happen.
Fixes: f95d7a46bc ("netfilter: ctnetlink: Fix regression in CTA_HELP processing")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When invoke __nf_conntrack_helper_find, it needs the rcu lock to
protect the helper module which would not be unloaded.
Now there are two caller nf_conntrack_helper_try_module_get and
ctnetlink_create_expect which don't hold rcu lock. And the other
callers left like ctnetlink_change_helper, ctnetlink_create_conntrack,
and ctnetlink_glue_attach_expect, they already hold the rcu lock
or spin_lock_bh.
Remove the rcu lock in functions nf_ct_helper_expectfn_find_by_name
and nf_ct_helper_expectfn_find_by_symbol. Because they return one pointer
which needs rcu lock, so their caller should hold the rcu lock, not in
these two functions.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All DSA tag receive functions do strictly the same thing after they have located
the originating source port from their tag specific protocol:
- push ETH_HLEN bytes
- set pkt_type to PACKET_HOST
- call eth_type_trans()
- bump up counters
- call netif_receive_skb()
Factor all of that into dsa_switch_rcv(). This also makes us return a pointer to
a sk_buff, which makes us symetric with the xmit function.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All DSA tag receive functions need to unshare the skb before mangling it, move
this to the generic dsa_switch_rcv() function which will allow us to make the
tag receive function return their mangled skb without caring about freeing a
NULL skb.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa_switch_rcv() already tests for dst == NULL, so there is no need to duplicate
the same check within the tag receive functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denys provided an awesome KASAN report pointing to an use
after free in xt_TCPMSS
I have provided three patches to fix this issue, either in xt_TCPMSS or
in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible
impact.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This comments are obsolete and should go, as there are no set of rules
per CPU anymore.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Because TCP_MIB_OUTRSTS is an important count, so always increase it
whatever send it successfully or not.
Now move the increment of TCP_MIB_OUTRSTS to the top of
tcp_send_active_reset to make sure it is increased always even though
fail to alloc skb.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pppol2tp_getsockopt() doesn't take into account the error code returned
by pppol2tp_tunnel_getsockopt() or pppol2tp_session_getsockopt(). If
error occurs there, pppol2tp_getsockopt() continues unconditionally and
reports erroneous values.
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
pppol2tp_setsockopt() unconditionally overwrites the error value
returned by pppol2tp_tunnel_setsockopt() or
pppol2tp_session_setsockopt(), thus hiding errors from userspace.
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new getsockopt operation to retrieve the socket cookie
for a specific socket based on the socket fd. It returns a unique
non-decreasing cookie for each socket.
Tested: https://android-review.googlesource.com/#/c/358163/
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've added a considerable amount of fixes for stalls and issues
with the blk-mq scheduling in the 4.11 series since forking
off the for-4.12/block branch. We need to do improvements on
top of that for 4.12, so pull in the previous fixes to make
our lives easier going forward.
Signed-off-by: Jens Axboe <axboe@fb.com>
The recent extension of F-RTO 89fe18e44 ("tcp: extend F-RTO
to catch more spurious timeouts") interacts badly with certain
broken middle-boxes. These broken boxes modify and falsely raise
the receive window on the ACKs. During a timeout induced recovery,
F-RTO would send new data packets to probe if the timeout is false
or not. Since the receive window is falsely raised, the receiver
would silently drop these F-RTO packets. The recovery would take N
(exponentially backoff) timeouts to repair N packet losses. A TCP
performance killer.
Due to this unfortunate situation, this patch removes this extension
to revert F-RTO back to the RFC specification.
Fixes: 89fe18e44f ("tcp: extend F-RTO to catch more spurious timeouts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch replace list_entry with list_prev_entry as it makes the
code more clear to read.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For string without format specifiers, use seq_puts(). For
seq_printf("\n"), use seq_putc('\n').
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T*)x)->f
|
- (T*)
e
)
Unnecessary parantheses are also remove.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
