Refactor the logic for changing SELinux policy booleans in a similar
manner to the refactoring of policy load, thereby reducing the
size of the critical section when the policy write-lock is held
and making it easier to convert the policy rwlock to RCU in the
future. Instead of directly modifying the policydb in place, modify
a copy and then swap it into place through a single pointer update.
Only fully copy the portions of the policydb that are affected by
boolean changes to avoid the full cost of a deep policydb copy.
Introduce another level of indirection for the sidtab since changing
booleans does not require updating the sidtab, unlike policy load.
While we are here, create a common helper for notifying
other kernel components and userspace of a policy change and call it
from both security_set_bools() and selinux_policy_commit().
Based on an old (2004) patch by Kaigai Kohei [1] to convert the policy
rwlock to RCU that was deferred at the time since it did not
significantly improve performance and introduced complexity. Peter
Enderborg later submitted a patch series to convert to RCU [2] that
would have made changing booleans a much more expensive operation
by requiring a full policydb_write();policydb_read(); sequence to
deep copy the entire policydb and also had concerns regarding
atomic allocations.
This change is now simplified by the earlier work to encapsulate
policy state in the selinux_policy struct and to refactor
policy load. After this change, the last major obstacle to
converting the policy rwlock to RCU is likely the sidtab live
convert support.
[1] https://lore.kernel.org/selinux/6e2f9128-e191-ebb3-0e87-74bfccb0767f@tycho.nsa.gov/
[2] https://lore.kernel.org/selinux/20180530141104.28569-1-peter.enderborg@sony.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move (most of) the definitions of hashtab_search() and hashtab_insert()
to the header file. In combination with the previous patch, this avoids
calling the callbacks indirectly by function pointers and allows for
better optimization, leading to a drastic performance improvement of
these operations.
With this patch, I measured a speed up in the following areas (measured
on x86_64 F32 VM with 4 CPUs):
1. Policy load (`load_policy`) - takes ~150 ms instead of ~230 ms.
2. `chcon -R unconfined_u:object_r:user_tmp_t:s0:c381,c519 /tmp/linux-src`
where /tmp/linux-src is an extracted linux-5.7 source tarball -
takes ~522 ms instead of ~576 ms. This is because of many
symtab_search() calls in string_to_context_struct() when there are
many categories specified in the context.
3. `stress-ng --msg 1 --msg-ops 10000000` - takes 12.41 s instead of
13.95 s (consumes 18.6 s of kernel CPU time instead of 21.6 s).
This is thanks to security_transition_sid() being ~43% faster after
this patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Refactor searching and inserting into hashtabs to pave the way for
converting hashtab_search() and hashtab_insert() to inline functions in
the next patch. This will avoid indirect calls and allow the compiler to
better optimize individual callers, leading to a significant performance
improvement.
In order to avoid the indirect calls, the key hashing and comparison
callbacks need to be extracted from the hashtab struct and passed
directly to hashtab_search()/_insert() by the callers so that the
callback address is always known at compile time. The kernel's
rhashtable library (<linux/rhashtable*.h>) does the same thing.
This of course makes the hashtab functions slightly easier to misuse by
passing a wrong callback set, but unfortunately there is no better way
to implement a hash table that is both generic and efficient in C. This
patch tries to somewhat mitigate this by only calling the hashtab
functions in the same file where the corresponding callbacks are
defined (wrapping them into more specialized functions as needed).
Note that this patch doesn't bring any benefit without also moving the
definitions of hashtab_search() and -_insert() to the header file, which
is done in a follow-up patch for easier review of the hashtab.c changes
in this patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
It is simpler to allocate them statically in the corresponding
structure, avoiding unnecessary kmalloc() calls and pointer
dereferencing.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: manual merging required in policydb.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Instead allocate hash tables with just the right size based on the
actual number of elements (which is almost always known beforehand, we
just need to defer the hashtab allocation to the right time). The only
case when we don't know the size (with the current policy format) is the
new filename transitions hashtable. Here I just left the existing value.
After this patch, the time to load Fedora policy on x86_64 decreases
from 790 ms to 167 ms. If the unconfined module is removed, it decreases
from 750 ms to 122 ms. It is also likely that other operations are going
to be faster, mainly string_to_context_struct() or mls_compute_sid(),
but I didn't try to quantify that.
The memory usage of all hash table arrays increases from ~58 KB to
~163 KB (with Fedora policy on x86_64).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Define a selinux state structure (struct selinux_state) for
global SELinux state and pass it explicitly to all security server
functions. The public portion of the structure contains state
that is used throughout the SELinux code, such as the enforcing mode.
The structure also contains a pointer to a selinux_ss structure whose
definition is private to the security server and contains security
server specific state such as the policy database and SID table.
This change should have no effect on SELinux behavior or APIs
(userspace or LSM). It merely wraps SELinux state and passes it
explicitly as needed.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: minor fixups needed due to collisions with the SCTP patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=VtxX
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Seven SELinux patches for v4.15, although five of the seven are small
build fixes and cleanups.
Of the remaining two patches, the only one worth really calling out is
Eric's fix for the SELinux filesystem xattr set/remove code; the other
patch simply converts the SELinux hash table implementation to use
kmem_cache.
Eric's setxattr/removexattr tweak converts SELinux back to calling the
commoncap implementations when the xattr is not SELinux related. The
immediate win is to fixup filesystem capabilities in user namespaces,
but it makes things a bit saner overall; more information in the
commit description"
* tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove extraneous initialization of slots_used and max_chain_len
selinux: remove redundant assignment to len
selinux: remove redundant assignment to str
selinux: fix build warning
selinux: fix build warning by removing the unused sid variable
selinux: Perform both commoncap and selinux xattr checks
selinux: Use kmem_cache for hashtab_node
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variables slots_used and max_chain_len are being initialized to zero
twice. Remove the second set of initializations in the for loop.
Cleans up the clang warnings:
Value stored to 'slots_used' is never read
Value stored to 'max_chain_len' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
During random test as own device to check slub account,
we found some slack memory from hashtab_node(kmalloc-64).
By using kzalloc(), middle of test result like below:
allocated size 240768
request size 45144
slack size 195624
allocation count 3762
So, we want to use kmem_cache_zalloc() and that
can reduce memory size 52byte(slack size/alloc count) per each struct.
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update my email address since epoch.ncsc.mil no longer exists.
MAINTAINERS and CREDITS are already correct.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The script "checkpatch.pl" pointed information out like the following.
Comparison to NULL could be written !…
Thus fix affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
After silencing the sleeping warning in mls_convert_context() I started
seeing similar traces from hashtab_insert. Do a cond_resched there too.
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Replace "thing != NULL" comparisons with just "thing" to make
the code look more uniform (mixed styles were used even in the
same source file).
Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
This patch changes hashtab.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Makes the key argument passed into hashtab_search and all the functions
it calls constant. These functions include hash table function pointers
hash_value and keycmp. The only implementations of these currently
are symhash and symcmp, which do not modify the key. The key parameter
should never be changed by any of these, so it should be const. This
is necessary to allow calling these functions with keys found in kernel
object class and permission definitions.
Signed-off-by: Chad Sellers <csellers@tresys.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
This patch converts SELinux code from kmalloc/memset to the new kazalloc
unction. On i386, this results in a text saving of over 1K.
Before:
text data bss dec hex filename
86319 4642 15236 106197 19ed5 security/selinux/built-in.o
After:
text data bss dec hex filename
85278 4642 15236 105156 19ac4 security/selinux/built-in.o
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
