Change return from int to void of convert_ace_to_cifs_ace as it never
fails.
fixes below issue reported by coccicheck
fs/cifs/cifssmb.c:3606:7-9: Unneeded variable: "rc". Return "0" on line
3620
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 ACL support is needed for many use cases now and should not be
ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL
ifdef so ACL support is always built into cifs.ko
Signed-off-by: Steve French <stfrench@microsoft.com>
The flags were named confusingly.
CIFS_ASYNC_OP now just means that we will not block waiting for credits
to become available so we thus rename this to be CIFS_NON_BLOCKING.
Change CIFS_NO_RESP to CIFS_NO_RSP_BUF to clarify that we will actually get a
response from the server but we will not get/do not want a response buffer.
Delete CIFSSMBNotify. This is an SMB1 function that is not used.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
For SMB1 oplock breaks we would grab one credit while sending the PDU
but we would never relese the credit back since we will never receive a
response to this from the server. Eventuallt this would lead to a hang
once all credits are leaked.
Fix this by defining a new flag CIFS_NO_SRV_RSP which indicates that there
is no server response to this command and thus we need to add any credits back
immediately after sending the PDU.
CC: Stable <stable@vger.kernel.org> #v5.0+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now we just return NULL cifsFileInfo pointer in cases we didn't find
or couldn't reopen a file. This hides errors from cifs_reopen_file()
especially retryable errors which should be handled appropriately.
Create new cifs_get_writable_file() routine that returns error codes
from cifs_reopen_file() and use it in the writeback codepath.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The reconnect might have happended after we obtained credits
and before we acquired srv_mutex. Check for that under the mutex
and retry an async operation if the reconnect is detected.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Make use of the recently
added cifs_credits structure to properly calculate credits for
non-MTU requests the same way we did for MTU ones.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are a couple places where we still account for 4 bytes
in the beginning of SMB2 packet which is not true in the current
code. Fix this to use a header preamble size where possible.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Even if a response is malformed, we should count credits
granted by the server to avoid miscalculations and unnecessary
reconnects due to client or server bugs. If the response has
been received partially, the session will be reconnected anyway
on the next iteration of the demultiplex thread, so counting
credits for such cases shouldn't break things.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
a trivial patch that replaces all use of snprintf with scnprintf.
scnprintf() is generally seen as a safer function to use than
snprintf for many use cases.
In our case, there is no actual difference between the two since we never
look at the return value. Thus we did not have any of the bugs that
scnprintf protects against and the patch does nothing.
However, for people reading our code it will be a receipt that we
have done our due dilligence and checked our code for this type of bugs.
See the presentation "Making C Less Dangerous In The Linux Kernel"
at this years LCA
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we don't find a writable file handle when retrying writepages
we break of the loop and do not unlock and put pages neither from
wdata2 nor from the original wdata. Fix this by walking through
all the remaining pages and cleanup them properly.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we mark MID as malformed if we get an error from server
in a read response. This leads to not properly processing credits
in the readv callback. Fix this by marking such a response as
normal received response and process it appropriately.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This addresses some compile warnings that you can
see depending on configuration settings.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After a successful failover, the cifs_reconnect_tcon() function will
make sure to reconnect every tcon to new target server.
Same as previous commit but for SMB1 codepath.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When issuing SMB1 read/write, pass the page offset to transport.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For a network file system we generally prefer large i/o, but
if the server returns invalid file system block/sector sizes
in cifs (vers=1.0) QFSInfo then set block size to a default
of a reasonable minimum (4K).
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
A powerpc build of cifs with gcc v8.2.0 produces this warning:
fs/cifs/cifssmb.c: In function ‘CIFSSMBNegotiate’:
fs/cifs/cifssmb.c:605:3: warning: ‘strncpy’ writing 16 bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
strncpy(pSMB->DialectsArray+count, protocols[i].name, 16);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Since we are already doing a strlen() on the source, change the strncpy
to a memcpy().
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs, the timestamps are stored in memory in the cifs_fattr structure,
which uses the deprecated 'timespec' structure. Now that the VFS code
has moved on to 'timespec64', the next step is to change over the fattr
as well.
This also makes 32-bit and 64-bit systems behave the same way, and
no longer overflow the 32-bit time_t in year 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.
So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.
Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().
Here's an example of how to trigger that:
$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard
(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f
/mnt/test
$ kill -9 2511
(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f
/mnt/test
By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use a read lease for the cached root fid so that we can detect
when the content of the directory changes (via a break) at which time
we close the handle. On next access to the root the handle will be reopened
and cached again.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a function to allocate wdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages that
point to the data buffer to write to.
wdata is reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs. This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).
Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
SMB server will not sign data transferred through RDMA read/write. When
signing is used, it's a good idea to have all the data signed.
In this case, use RDMA send/recv for all data transfers. This will degrade
performance as this is not generally configured in RDMA environemnt. So
warn the user on signing and RDMA send/recv.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
and get rid of some get_rfc1002_length() in smb2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Adding an extra debug message to show if a tree connect failure during
reconnect (and made it a log once so it doesn't spam the logs).
Saw a case recently where tree connect repeatedly returned
access denied on reconnect and it wasn't as easy to spot as it
should have been.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This variable is set to 4 for all protocol versions and replaces
the hardcoded constant 4 throughought the code.
This will later be updated to reflect whether a response packet
has a 4 byte length preamble or not once we start removing this
field from the SMB2+ dialects.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This bug was fixed before, but came up again with the latest
compiler in another function:
fs/cifs/cifssmb.c: In function 'CIFSSMBSetEA':
fs/cifs/cifssmb.c:6362:3: error: 'strncpy' offset 8 is out of the bounds [0, 4] [-Werror=array-bounds]
strncpy(parm_data->list[0].name, ea_name, name_len);
Let's apply the same fix that was used for the other instances.
Fixes: b2a3ad9ca5 ("cifs: silence compiler warnings showing up with gcc-4.7.0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
* Remove ses->ipc_tid.
* Make IPC$ regular tcon.
* Add a direct pointer to it in ses->tcon_ipc.
* Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All
IPC tcons are pipes but not all pipes are IPC.
* All TreeConnect functions now cannot take a NULL tcon object.
The IPC tcon has the same lifetime as the session it belongs to. It is
created when the session is created and destroyed when the session is
destroyed.
Since no mounts directly refer to the IPC tcon, its refcount should
always be set to initialisation value (1). Thus we make sure
cifs_put_tcon() skips it.
If the mount request resulting in a new session being created requires
encryption, try to require it too for IPC.
* set SERVER_NAME_LENGTH to serverName actual size
The maximum length of an ipv6 string representation is defined in
INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This patch is for preparing upper layer doing SMB read via RDMA write.
When RDMA write is used for SMB read, the returned data length is in
DataRemaining in the response packet. Reading it properly by adding a
parameter to specifiy where the returned data length is.
Add the defition for memory registration to wdata and return the correct
length based on if RDMA write is used.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When sending I/O, if size is larger than rdma_readwrite_threshold we prepare
to send SMB write packet for a RDMA read via memory registration. The actual
I/O is done by remote peer through local RDMA hardware. Modify the relevant
fields in the packet accordingly, and append a smbd_buffer_descriptor_v1 to
the end of the SMB write packet.
On write I/O finish, deregister the memory region if this was for a RDMA read.
If remote invalidation is not used, the call to smbd_deregister_mr will do
local invalidation and possibly wait. Memory region is normally deregistered
in MID callback as soon as it's used. There are situations where the MID may
not be created on I/O failure, under which memory region is deregistered when
write data context is released.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+DYj
-----END PGP SIGNATURE-----
Merge tag '4.14-smb3-xattr-enable' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs update from Steve French:
"Enable xattr support for smb3 and also a bugfix"
* tag '4.14-smb3-xattr-enable' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Check for timeout on Negotiate stage
cifs: Add support for writing attributes on SMB2+
cifs: Add support for reading attributes on SMB2+
Some servers seem to accept connections while booting but never send
the SMBNegotiate response neither close the connection, causing all
processes accessing the share hang on uninterruptible sleep state.
This happens when the cifs_demultiplex_thread detects the server is
unresponsive so releases the socket and start trying to reconnect.
At some point, the faulty server will accept the socket and the TCP
status will be set to NeedNegotiate. The first issued command accessing
the share will start the negotiation (pid 5828 below), but the response
will never arrive so other commands will be blocked waiting on the mutex
(pid 55352).
This patch checks for unresponsive servers also on the negotiate stage
releasing the socket and reconnecting if the response is not received
and checking again the tcp state when the mutex is acquired.
PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls"
#0 [ffff880fd9add9f0] schedule at ffffffff81467eb9
#1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0
#2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a
#3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs]
#4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs]
#5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs]
....
Which is waiting a mutex owned by:
PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx"
#0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9
#1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs]
#2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs]
#3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs]
#4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs]
#5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs]
#6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs]
#7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs]
....
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurélien Aptel <aaptel@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This adds support for writing extended attributes on SMB2+ shares.
Attributes can be written using the setfattr command.
RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Since commit c69899a17c "NFSv4: Update of VFS byte range lock must be
atomic with the stateid update", NFSv4 has been inserting locks in rpciod
worker context. The result is that the file_lock's fl_nspid is the
kworker's pid instead of the original userspace pid.
The fl_nspid is only used to represent the namespaced virtual pid number
when displaying locks or returning from F_GETLK. There's no reason to set
it for every inserted lock, since we can usually just look it up from
fl_pid. So, instead of looking up and holding struct pid for every lock,
let's just look up the virtual pid number from fl_pid when it is needed.
That means we can remove fl_nspid entirely.
The translaton and presentation of fl_pid should handle the following four
cases:
1 - F_GETLK on a remote file with a remote lock:
In this case, the filesystem should determine the l_pid to return here.
Filesystems should indicate that the fl_pid represents a non-local pid
value that should not be translated by returning an fl_pid <= 0.
2 - F_GETLK on a local file with a remote lock:
This should be the l_pid of the lock manager process, and translated.
3 - F_GETLK on a remote file with a local lock, and
4 - F_GETLK on a local file with a local lock:
These should be the translated l_pid of the local locking process.
Fuse was already doing the correct thing by translating the pid into the
caller's namespace. With this change we must update fuse to translate
to init's pid namespace, so that the locks API can then translate from
init's pid namespace into the pid namespace of the caller.
With this change, the locks API will expect that if a filesystem returns
a remote pid as opposed to a local pid for F_GETLK, that remote pid will
be <= 0. This signifies that the pid is remote, and the locks API will
forego translating that pid into the pid namespace of the local calling
process.
Finally, we convert remote filesystems to present remote pids using
negative numbers. Have lustre, 9p, ceph, cifs, and dlm negate the remote
pid returned for F_GETLK lock requests.
Since local pids will never be larger than PID_MAX_LIMIT (which is
currently defined as <= 4 million), but pid_t is an unsigned int, we
should have plenty of room to represent remote pids with negative
numbers if we assume that remote pid numbers are similarly limited.
If this is not the case, then we run the risk of having a remote pid
returned for which there is also a corresponding local pid. This is a
problem we have now, but this patch should reduce the chances of that
occurring, while also returning those remote pid numbers, for whatever
that may be worth.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Some minor cleanup of cifs query xattr functions (will also make
SMB3 xattr implementation cleaner as well).
Signed-off-by: Steve French <steve.french@primarydata.com>
When processing responses, and in particular freeing mids (DeleteMidQEntry),
which is very important since it also frees the associated buffers (cifs_buf_release),
we can block a long time if (writes to) socket is slow due to low memory or networking
issues.
We can block in send (smb request) waiting for memory, and be blocked in processing
responess (which could free memory if we let it) - since they both grab the
server->srv_mutex.
In practice, in the DeleteMidQEntry case - there is no reason we need to
grab the srv_mutex so remove these around DeleteMidQEntry, and it allows
us to free memory faster.
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
CURRENT_TIME macro is not y2038 safe on 32 bit systems.
The patch replaces all the uses of CURRENT_TIME by current_time() for
filesystem times, and ktime_get_* functions for authentication
timestamps and timezone calculations.
This is also in preparation for the patch that transitions vfs
timestamps to use 64 bit time and hence make them y2038 safe.
CURRENT_TIME macro will be deleted before merging the aforementioned
change.
The inode timestamps read from the server are assumed to have correct
granularity and range.
The patch also assumes that the difference between server and client
times lie in the range INT_MIN..INT_MAX. This is valid because this is
the difference between current times between server and client, and the
largest timezone difference is in the range of one day.
All cifs timestamps currently use timespec representation internally.
Authentication and timezone timestamps can also be transitioned into
using timespec64 when all other timestamps for cifs is transitioned to
use timespec64.
Link: http://lkml.kernel.org/r/1491613030-11599-4-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mac requires the unicode flag to be set for cifs, even for the smb
echo request (which doesn't have strings).
Without this Mac rejects the periodic echo requests (when mounting
with cifs) that we use to check if server is down
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Currently during receiving a read response mid->resp_buf can be
NULL when it is being passed to cifs_discard_remaining_data() from
cifs_readv_discard(). Fix it by always passing server->smallbuf
instead and initializing mid->resp_buf at the end of read response
processing.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
Fix two minor sparse compile check warnings
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
since the DFS payload is not tied to the SMB version we can:
* isolate the DFS payload in its own struct, and include that struct in
packet structs
* move the function that parses the response to misc.c and make it work
on the new DFS payload struct (add payload size and utf16 flag as a
result).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Allow to decrypt transformed packets that are bigger than the big
buffer size. In particular it is used for read responses that can
only exceed the big buffer size.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
We need to process read responses differently because the data
should go directly into preallocated pages. This can be done
by specifying a mid handle callback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
In order to simplify further encryption support we need to separate
RFC1001 length and SMB2 header when sending a request. Put the length
field in iov[0] and the rest of the packet into following iovs.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Now SendReceive2 frees the first iov and returns a response buffer
in it that increases a code complexity. Simplify this by making
a caller responsible for freeing request buffer itself and returning
a response buffer in a separate iov.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
