Pre-tunnel rules are TC flower and OvS rules that forward a packet to the
tunnel end point where it can then pass through the network stack and be
decapsulated. These are required if the tunnel end point is, say, an OvS
internal port.
Currently, firmware determines that a packet is in a tunnel and decaps it
if it has a known destination IP and MAC address. However, this bypasses
the flower pre-tunnel rule and so does not update the stats. Further to
this it ignores VLANs that may exist outside of the tunnel header.
Offload pre-tunnel rules to the NFP. This embeds the pre-tunnel rule into
the tunnel decap process based on (firmware) mac index and VLAN. This
means that decap can be carried out correctly with VLANs and that stats
can be updated for all kernel rules correctly.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pre-tunnel rules must direct packets to an internal port based on L2
information. Rules that egress to an internal port are already indicated
by a non-NULL device in its nfp_fl_payload struct. Verfiy the rest of the
match fields indicate that the rule is a pre-tunnel rule. This requires a
full match on the destination MAC address, an option VLAN field, and no
specific matches on other lower layer fields (with the exception of L4
proto and flags).
If a rule is identified as a pre-tunnel rule then mark it for offload to
the pre-tunnel table. Similarly, remove it from the pre-tunnel table on
rule deletion. The actual offloading of these commands is left to a
following patch.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pre-tunnel rules are used when the tunnel end-point is on an 'internal
port'. These rules are used to direct the tunnelled packets (based on outer
header fields) to the internal port where they can be detunnelled. The
rule must send the packet to ingress the internal port at the TC layer.
Currently FW does not support an action to send to ingress so cannot
offload such rules. However, in preparation for populating the pre-tunnel
table to represent such rules, check for rules that send to the ingress of
an internal port and mark them as such. Further validation of such rules
is left to subsequent patches.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NFP allows the merging of 2 flows together into a single offloaded flow.
In the kernel datapath the packet must match 1 flow, impliment its
actions, recirculate, match the 2nd flow and also impliment its actions.
Merging creates a single flow with all actions from the 2 original flows.
Firmware impliments a tunnel header push as the packet is about to egress
the card. Therefore, if the first merge rule candiate pushes a tunnel,
then the second rule can only have an egress action for a valid merge to
occur (or else the action ordering will be incorrect). This prevents the
pushing of a tunnel header followed by the pushing of a vlan header.
In order to support this behaviour, firmware allows VLAN information to
be encoded in the tunnel push action. If this is non zero then the fw will
push a VLAN after the tunnel header push meaning that 2 such flows with
these actions can be merged (with action order being maintained).
Support tunnel in VLAN pushes by encoding VLAN information in the tunnel
push action of any merge flow requiring this.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC mirred actions (redirect and mirred) can send to egress or ingress of a
device. Currently only egress is used for hw offload rules.
Modify the intermediate representation for hw offload to include mirred
actions that go to ingress. This gives drivers access to such rules and
can decide whether or not to offload them.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC mirred actions can send to egress or ingress on a given netdev. Helpers
exist to detect actions that are mirred to egress. Extend the header file
to include helpers to detect ingress mirred actions.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC rules can impliment skbedit actions. Currently actions that modify the
skb mark are passed to offloading drivers via the hardware intermediate
representation in the flow_offload API.
Extend this to include skbedit actions that modify the packet type of the
skb. Such actions may be used to set the ptype to HOST when redirecting a
packet to ingress.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc_act header file contains an inline function that checks if an
action is changing the skb mark of a packet and a further function to
extract the mark.
Add similar functions to check for and get skbedit actions that modify
the packet type of the skb.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2019-08-04
This series contains more updates to fm10k from Jake Keller.
Jake removes the unnecessary initialization of some variables to help
resolve static code checker warnings. Explicitly return success during
resume, since the value of 'err' is always success. Fixed a issue with
incrementing a void pointer, which can produce undefined behavior. Used
the __always_unused macro for function templates that are passed as
parameters in functions, but are not used. Simplified the code by
removing an unnecessary macro in determining the value of NON_Q_VECTORS.
Fixed an issue, using bitwise operations to prevent the low address
overwriting the high portion of the address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Synchronize PCIe PHY initialization with vendor driver version 8.047.01.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper for MAC OCP read-modify-write operations.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code piece was inherited from RTL8139 code, the register at
address 0x5c however has a different meaning on RTL8169 and is unused.
So we can remove this.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Taht says:
====================
Two small fq_codel optimizations
These two patches improve fq_codel performance
under extreme network loads. The first patch
more rapidly escalates the codel count under
overload, the second just kills a totally useless
statistic.
(sent together because they'd otherwise conflict)
====================
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is almost impossible to get anything other than a 0 out of
flow->dropped statistic with a tc class dump, as it resets to 0
on every round.
It also conflates ecn marks with drops.
It would have been useful had it kept a cumulative drop count, but
it doesn't. This patch doesn't change the API, it just stops
tracking a stat and state that is impossible to measure and nobody
uses.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the field fq_codel is often used with a smaller memory or
packet limit than the default, and when the bulk dropper is hit,
the drop pattern bifircates into one that more slowly increases
the codel drop rate and hits the bulk dropper more than it should.
The scan through the 1024 queues happens more often than it needs to.
This patch increases the codel count in the bulk dropper, but
does not change the drop rate there, relying on the next codel round
to deliver the next packet at the original drop rate
(after that burst of loss), then escalate to a higher signaling rate.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
action fixes for flow_offload infra compatibility
Fix rcu warnings due to usage of action helpers that expect rcu read lock
protection from rtnl-protected context of flow_offload infra.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao says:
====================
net: hisilicon: Fix a few problems with hip04_eth
During the use of the hip04_eth driver,
several problems were found,
which solved the hip04_tx_reclaim reentry problem,
fixed the problem that hip04_mac_start_xmit never
returns NETDEV_TX_BUSY
and the dma_map_single failed on the arm64 platform.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On the arm64 platform, executing "ifconfig eth0 up" will fail,
returning "ifconfig: SIOCSIFFLAGS: Input/output error."
ndev->dev is not initialized, dma_map_single->get_dma_ops->
dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE
directly, so when we use dma_map_single, the first parameter
is to use the device of platform_device.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TX_DESC_NUM is 256, in tx_count, the maximum value of
mod(TX_DESC_NUM - 1) is 254, the variable "count" in
the hip04_mac_start_xmit function is never equal to
(TX_DESC_NUM - 1), so hip04_mac_start_xmit never
return NETDEV_TX_BUSY.
tx_count is modified to mod(TX_DESC_NUM) so that
the maximum value of tx_count can reach
(TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn
NETDEV_TX_BUSY.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 171a9bae68 ("staging/octeon: Allow test build on
!MIPS"), the following combination of configs cause a few Kconfig
warnings and build errors (distilled from arm allyesconfig and Randy's
randconfig builds):
CONFIG_NETDEVICES=y
CONFIG_STAGING=y
CONFIG_COMPILE_TEST=y
and CONFIG_OCTEON_ETHERNET as either a module or built-in.
WARNING: unmet direct dependencies detected for MDIO_OCTEON
Depends on [n]: NETDEVICES [=y] && MDIO_DEVICE [=y] && MDIO_BUS [=y]
&& 64BIT [=n] && HAS_IOMEM [=y] && OF_MDIO [=n]
Selected by [y]:
- OCTEON_ETHERNET [=y] && STAGING [=y] && (CAVIUM_OCTEON_SOC ||
COMPILE_TEST [=y]) && NETDEVICES [=y]
In file included from ../drivers/net/phy/mdio-octeon.c:14:
../drivers/net/phy/mdio-cavium.h:111:36: error: implicit declaration of
function ‘writeq’; did you mean ‘writel’?
[-Werror=implicit-function-declaration]
111 | #define oct_mdio_writeq(val, addr) writeq(val, (void *)addr)
| ^~~~~~
CONFIG_64BIT is not strictly necessary if the proper readq/writeq
definitions are included from io-64-nonatomic-lo-hi.h.
CONFIG_OF_MDIO is not needed when CONFIG_COMPILE_TEST is enabled because
of commit f9dc9ac516 ("of/mdio: Add dummy functions in of_mdio.h.").
Fixes: 171a9bae68 ("staging/octeon: Allow test build on !MIPS")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the CPU port registers dump into the master interface registers
dump through ethtool, by nesting the ethtool_drvinfo and ethtool_regs
structures of the CPU port into the dump.
drvinfo->regdump_len will contain the full data length, while regs->len
will contain only the master interface registers dump length.
This allows for example to dump the CPU port registers on a ZII Dev
C board like this:
# ethtool -d eth1
0x004: 0x00000000
0x008: 0x0a8000aa
0x010: 0x01000000
0x014: 0x00000000
0x024: 0xf0000102
0x040: 0x6d82c800
0x044: 0x00000020
0x064: 0x40000000
0x084: RCR (Receive Control Register) 0x47c00104
MAX_FL (Maximum frame length) 1984
FCE (Flow control enable) 0
BC_REJ (Broadcast frame reject) 0
PROM (Promiscuous mode) 0
DRT (Disable receive on transmit) 0
LOOP (Internal loopback) 0
0x0c4: TCR (Transmit Control Register) 0x00000004
RFC_PAUSE (Receive frame control pause) 0
TFC_PAUSE (Transmit frame control pause) 0
FDEN (Full duplex enable) 1
HBC (Heartbeat control) 0
GTS (Graceful transmit stop) 0
0x0e4: 0x76735d6d
0x0e8: 0x7e9e8808
0x0ec: 0x00010000
.
.
.
88E6352 Switch Port Registers
------------------------------
00: Port Status 0x4d04
Pause Enabled 0
My Pause 1
802.3 PHY Detected 0
Link Status Up
Duplex Full
Speed 100 or 200 Mbps
EEE Enabled 0
Transmitter Paused 0
Flow Control 0
Config Mode 0x4
01: Physical Control 0x003d
RGMII Receive Timing Control Default
RGMII Transmit Timing Control Default
200 BASE Mode 100
Flow Control's Forced value 0
Force Flow Control 0
Link's Forced value Up
Force Link 1
Duplex's Forced value Full
Force Duplex 1
Force Speed 100 or 200 Mbps
.
.
.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak says:
====================
Fix batched event generation for vlan action
When adding or deleting a batch of entries, the kernel sends up to
TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user
space. However it does not consider that the action sizes may vary and
require different skb sizes.
For example, consider the following script adding 32 entries with all
supported vlan parameters (in order to maximize netlink messages size):
% cat tc-batch.sh
TC="sudo /mnt/iproute2.git/tc/tc"
$TC actions flush action vlan
for i in `seq 1 $1`;
do
cmd="action vlan push protocol 802.1q id 4094 priority 7 pipe \
index $i cookie aabbccddeeff112233445566778800a1 "
args=$args$cmd
done
$TC actions add $args
%
% ./tc-batch.sh 32
Error: Failed to fill netlink attributes while adding TC action.
We have an error talking to the kernel
%
patch 1 adds callback in tc_action_ops of vlan action, which calculates
the action size, and passes size to tcf_add_notify()/tcf_del_notify().
patch 2 updates the TDC test suite with relevant vlan test cases.
====================
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update TDC tests with cases varifying ability of TC to install or delete
batches of vlan actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Fixes: c7e2b9689 ("sched: introduce vlan action")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Various switch fall through annotations to fixup warnings & errors
resulting from -Wimplicit-fallthrough.
- A fix for systems (at least jazz) using an i8253 PIT as clocksource
when it's not suitably configured.
- Set struct cacheinfo's cpu_map_populated field to true, indicating
that we filled in cache info detected from cop0 registers & avoiding
complaints about that info being (intentionally) missing in
devicetree.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXUnSPBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2u3gD/TaMPczS5027R0FMXskiroUHaMG4S
JL0EYIVmfny4vwYBAIvLr5l1jEXEqegjYXFabuI5PybQlFmTZMhjauh6gKYJ
=e6fl
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 5.3:
- Various switch fall through annotations to fixup warnings & errors
resulting from -Wimplicit-fallthrough.
- A fix for systems (at least jazz) using an i8253 PIT as clocksource
when it's not suitably configured.
- Set struct cacheinfo's cpu_map_populated field to true, indicating
that we filled in cache info detected from cop0 registers &
avoiding complaints about that info being (intentionally) missing
in devicetree"
* tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: BCM63XX: Mark expected switch fall-through
MIPS: OProfile: Mark expected switch fall-throughs
MIPS: Annotate fall-through in Cavium Octeon code
MIPS: Annotate fall-through in kvm/emulate.c
mips: fix cacheinfo
MIPS: kernel: only use i8253 clocksource with periodic clockevent
Ido Schimmel says:
====================
drop_monitor: Various improvements and cleanups
This patchset performs various improvements and cleanups in drop monitor
with no functional changes intended. There are no changes in these
patches relative to the RFC I sent two weeks ago [1].
A followup patchset will extend drop monitor with a packet alert mode in
which the dropped packet is notified to user space instead of just a
summary of recent drops. Subsequent patchsets will add the ability to
monitor hardware originated drops via drop monitor.
[1] https://patchwork.ozlabs.org/cover/1135226/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Each operation from user space should be protected by the global drop
monitor mutex. Use the pre_doit / post_doit hooks to take / release the
lock instead of doing it explicitly in each function.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add various extack messages to make drop_monitor more user friendly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove multiple blank lines which are visually annoying and useless.
This suppresses the "Please don't use multiple blank lines" checkpatch
messages.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While 'per_cpu_dm_data' is a per-CPU variable, its 'skb' and
'send_timer' fields can be accessed concurrently by the CPU sending the
netlink notification to user space from the workqueue and the CPU
tracing kfree_skb(). This spinlock is meant to protect against that.
Document its scope and suppress the checkpatch message "spinlock_t
definition without comment".
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'trace_state_mutex' does not only protect the global 'trace_state'
variable, but also the global 'hw_stats_list'.
Subsequent patches are going add more operations from user space to
drop_monitor and these all need to be mutually exclusive.
Rename 'trace_state_mutex' to the more fitting 'net_dm_mutex' name and
document its scope.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error code 'ENOTSUPP' is reserved for use with NFS. Use 'EOPNOTSUPP'
instead.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: Fixes for -net
Couple of fixes for -net. More info in commit log.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not try to return a fragment entry from TC list. Otherwise we may not
clean properly allocated entries.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When queues >= 4 we use different registers but we were not subtracting
the offset of 4. Fix this.
Found out by Coverity.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixup the XGMAC selftests by correctly finishing the implementation of
set_filter callback.
Result:
$ ethtool -t enp4s0
The test result is PASS
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters -95
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 0
7. MC Filter 0
8. UC Filter 0
9. Flow Control 0
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This Kconfig option is unused, drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the two headers into one, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove ksz_port_cleanup(), which is unused. Add missing include
"ksz_common.h", which fixes the following warning when built with
make ... W=1
drivers/net/dsa/microchip/ksz_common.c:23:6: warning: no previous prototype for ‘...’ [-Wmissing-prototypes]
Note that the order of the headers cannot be swapped, as that would
trigger missing forward declaration errors, which would indicate the
way forward is to merge the two headers into one.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated
which consists most of patches in this pull request. Only most notable
iwlwifi fixes are listed below.
mwifiex
* fix a regression related to WPA1 networks since v5.3-rc1
iwlwifi
* fix use-after-free issues
* fix DMA mapping API usage errors
* fix frame drop occurring due to reorder buffer handling in
RSS in certain conditions
* fix rate scale locking issues
* disable TX A-MSDU on older NICs as it causes problems and was
never supposed to be supported
* new PCI IDs
* GEO_TX_POWER_LIMIT API issue that many people were hitting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdSWJ0AAoJEG4XJFUm622bwb4H/1cbH/VoPkNPfRb6783G3Fuc
SWcI655nMDHY3cElhLPGQrR4OuNYbFpBDT7O73XMIVqnkHlgq3L/VZD2qaacSd4H
tY4HEkkHobil9gdsEt8hpBstp9xNi36klDiq9gEOLT88eatdukCZTsCnBwaTFSEQ
84QxsVsHWuB+khVDay6jprA+vwL6YopOlPwfY9+q0LHWCHq1C98ZqPZoxjb8dzN7
bbW4hWIhMHRtN9ixPwvoRhscev2ZgRPHAncoGFE8bmRM79srZpG0mDeAhQPLGrJz
YSoGtylHpQxg3vzz2y80fMpH6jsUHFeA56xuKPQ5gnUm4bPeFbhx7h29DuABsAw=
=GDUP
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.3
Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated
which consists most of patches in this pull request. Only most notable
iwlwifi fixes are listed below.
mwifiex
* fix a regression related to WPA1 networks since v5.3-rc1
iwlwifi
* fix use-after-free issues
* fix DMA mapping API usage errors
* fix frame drop occurring due to reorder buffer handling in
RSS in certain conditions
* fix rate scale locking issues
* disable TX A-MSDU on older NICs as it causes problems and was
never supposed to be supported
* new PCI IDs
* GEO_TX_POWER_LIMIT API issue that many people were hitting
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull HID fixes from Jiri Kosina:
- functional regression fix for some of the Logitech unifying devices,
from Hans de Goede
- race condition fix in hid-sony for bug severely affecting
Valve/Android deployments, from Roderick Colenbrander
- several fixes for issues found by syzbot/kasan, from Oliver Neukum
and Hillf Danton
- functional regression fix for Wacom Cintiq device, from Aaron
Armstrong Skomra
- a few other assorted device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: sony: Fix race condition between rumble and device remove.
HID: hiddev: do cleanup in failure of opening a device
HID: hiddev: avoid opening a disconnected device
HID: input: fix a4tech horizontal wheel custom usage
HID: Add quirk for HP X1200 PIXART OEM mouse
HID: holtek: test for sanity of intfdata
HID: wacom: fix bit shift for Cintiq Companion 2
HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52
HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devices
HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT
HID: logitech-dj: add the Powerplay receiver
HID: logitech-hidpp: add USB PID for a few more supported mice
HID: logitech-dj: rename "gaming" receiver to "lightspeed"
be_process_mcc() is invoked in 3 different places and
always with BHs disabled except the be_poll function
but since it's invoked from softirq with BHs
disabled it won't hurt.
v1->v2: added explanation to the patch
v2->v3: add a missing call from be_cmds.c
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A call to 'kfree_skb()' is missing in the error handling path of
'init_one()'.
This is already present in 'remove_one()' but is missing here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sun4i-emac uses the "phy" property to find the PHY it's supposed to
use. This property was deprecated in favor of "phy-handle" in commit
8c5b094476 ("dt-bindings: net: sun4i-emac: Convert the binding to a
schemas").
Add support for this new property name, and fall back to the old one in
case the device tree hasn't been updated.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull pti updates from Thomas Gleixner:
"The performance deterioration departement is not proud at all to
present yet another set of speculation fences to mitigate the next
chapter in the 'what could possibly go wrong' story.
The new vulnerability belongs to the Spectre class and affects GS
based data accesses and has therefore been dubbed 'Grand Schemozzle'
for secret communication purposes. It's officially listed as
CVE-2019-1125.
Conditional branches in the entry paths which contain a SWAPGS
instruction (interrupts and exceptions) can be mis-speculated which
results in speculative accesses with a wrong GS base.
This can happen on entry from user mode through a mis-speculated
branch which takes the entry from kernel mode path and therefore does
not execute the SWAPGS instruction. The following speculative accesses
are done with user GS base.
On entry from kernel mode the mis-speculated branch executes the
SWAPGS instruction in the entry from user mode path which has the same
effect that the following GS based accesses are done with user GS
base.
If there is a disclosure gadget available in these code paths the
mis-speculated data access can be leaked through the usual side
channels.
The entry from user mode issue affects all CPUs which have speculative
execution. The entry from kernel mode issue affects only Intel CPUs
which can speculate through SWAPGS. On CPUs from other vendors SWAPGS
has semantics which prevent that.
SMAP migitates both problems but only when the CPU is not affected by
the Meltdown vulnerability.
The mitigation is to issue LFENCE instructions in the entry from
kernel mode path for all affected CPUs and on the affected Intel CPUs
also in the entry from user mode path unless PTI is enabled because
the CR3 write is serializing.
The fences are as usual enabled conditionally and can be completely
disabled on the kernel command line. The Spectre V1 documentation is
updated accordingly.
A big "Thank You!" goes to Josh for doing the heavy lifting for this
round of hardware misfeature 'repair'. Of course also "Thank You!" to
everybody else who contributed in one way or the other"
* 'x86/grand-schemozzle' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: Add swapgs description to the Spectre v1 documentation
x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS
x86/entry/64: Use JMP instead of JMPQ
x86/speculation: Enable Spectre v1 swapgs mitigations
x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations
Add a test with multiple exit conditions.
It's not an infinite loop only when the verifier can properly track
all math on variable 'i' through all possible ways of executing this loop.
barrier()s are needed to disable llvm optimization that combines multiple
branches into fewer branches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Add a test that returns a 'random' number between [0, 2^20)
If state pruning is not working correctly for loop body the number of
processed insns will be 2^20 * num_of_insns_in_loop_body and the program
will be rejected.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
