Commit Graph

1106 Commits

Author SHA1 Message Date
Wolfram Sang
1ef9f05835 ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
Fix this from the logs:

usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-29 12:57:49 +02:00
Takashi Iwai
984a854705 Merge branch 'for-linus' into for-next
Merge back the latest HD-audio stuff for further development.
2015-05-29 10:27:50 +02:00
Takashi Iwai
574d69c27b ALSA: bcd2000: Make local data static
Spotted by sparse:
  sound/usb/bcd2000/bcd2000.c:73:1: warning: symbol 'devices_used' was not declared. Should it be static?

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-26 13:00:01 +02:00
Vittorio G (VittGam)
ae425bb2a0 ALSA: usb-audio: Add quirk for MS LifeCam HD-3000
Microsoft LifeCam HD-3000 (045e:0779) needs a similar quirk for
suppressing the unsupported sample rate inquiry.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481
Cc: <stable@vger.kernel.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24 08:26:55 +02:00
Takashi Iwai
fa94b0d725 ALSA: usb-audio: Add quirk for MS LifeCam Studio
Microsoft LifeCam Studio (045e:0772) needs a similar quirk for
suppressing the wrong sample rate inquiry.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-19 10:46:49 +02:00
Takamichi Horikawa
6d1f2f6056 ALSA: usb-audio: Fix audio output on Roland SC-D70 sound module
Roland SC-D70 reports its device class as vendor specific class and
the quirk QUIRK_AUDIO_FIXED_ENDPOINT was used for audio output.

In the quirks table the sampling rate was hard-coded to 44100 Hz
and therefore not worked when the sound module was in 48000 Hz mode.

In this change the quirk is changed to QUIRK_AUDIO_STANDARD_INTERFACE
but as the sound module reports incorrect bSubframeSize in its
descriptors, additional change is made in format.c to detect it and
to override it (which uses the existing code for Edirol SD-90).

Tested both when the sound module was in 44100 Hz mode and 48000 Hz
mode and both audio input and output. MIDI related part of the driver
is not touched.

Signed-off-by: Takamichi Horikawa <takamichiho@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-21 07:59:10 +02:00
Takashi Iwai
9a4f35865f Merge branch 'for-next' into for-linus 2015-04-13 10:23:18 +02:00
Adam Honse
eef0342cf3 ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate
Adds Microsoft LifeCam Cinema USB ID to the snd_usb_get_sample_rate_quirk list as the Lifecam Cinema does not appear to support getting the sample rate.

Fixes the issue where the LifeCam Cinema would wait for USB timeout and log the message "cannot get freq at ep 0x82" when accessed.

Addresses bug report https://bugzilla.kernel.org/show_bug.cgi?id=95961.

Signed-off-by: Adam Honse <calcprogrammer1@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-12 09:08:42 +02:00
Dmitry M. Fedin
3dc8523fa7 ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"

Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-09 17:20:39 +02:00
Takashi Iwai
0a59983873 Merge branch 'for-linus' into for-next
Back merge HD-audio quirks to for-next branch, so that we can apply
a couple of more quirks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08 11:30:49 +02:00
Eric Wong
9fc88ad6fd ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate
Adding this quirk allows us to avoid the noisy
"cannot get freq at ep 0x1" message in dmesg output every time
playback starts.

This ought to affect other Benchmark DAC1 variations using the same
"Microchip Technology, Inc." chip as well, but I have only tested
with the "Pre" variant.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Joe Turner <joe@oampo.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-04 14:07:56 +02:00
Takashi Iwai
34e72afe73 Merge branch 'for-linus' into for-next 2015-03-16 14:48:05 +01:00
Daniel Mack
fcdcd1dec6 ALSA: snd-usb: add quirks for Roland UA-22
The device complies to the UAC1 standard but hides that fact with
proprietary descriptors. The autodetect quirk for Roland devices
catches the audio interface but misses the MIDI part, so a specific
quirk is needed.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Rafa Lafuente <rafalafuente@gmail.com>
Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 10:19:49 +01:00
Takashi Iwai
4aa01c408b Merge branch 'for-linus' into for-next
Merging the HD-audio fixes back to base devel branch for further
working on it.
2015-03-09 08:42:00 +01:00
Takashi Iwai
f44f07cf39 ALSA: line6: Clamp values correctly
The usages of clamp() macro in sound/usb/line6/playback.c are just
wrong, the low and high values are swapped.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:03:28 +01:00
Takashi Iwai
8b28c93fe5 ALSA: usb-audio: Check Marantz/Denon USB DACs in a single place
There are three places doing the same check.  Let's make them
together.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-04 16:37:46 +01:00
Frank C Guenther
3cd1ce0420 ALSA: usb: Fix support for Denon DA-300USB DAC (ID 154e:1003)
Fix problem where playback of Denon DA-300USB DAC sometimes does not
start and leads to error messages like "clock source 41 is not valid,
cannot use".

Solution: Treat this device the same as other Denon/Marantz devices in
sound/usb/quirks.c.

Tested with both PCM and DSD formats.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93261
Signed-off-by: Frank C Guenther <bugzilla.frnkcg@spamgourmet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:14:18 +01:00
Joe Turner
b62b998010 ALSA: usb-audio: Don't attempt to get Lifecam HD-5000 sample rate
Adds a quirk to disable the check that the sample rate has been set correctly, as the Lifecam does not support getting the sample rate.

This means that we don't need to wait for the USB timeout when attempting to get the sample rate. Waiting for the timeout causes problems in some applications, which give up on the device acquisition process before it has had time to complete, resulting in no sound.

[minor tidy up by tiwai]

Signed-off-by: Joe Turner <joe@oampo.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 07:20:04 +01:00
Chris Rorvick
25a0707cf6 ALSA: line6: Improve line6_read/write_data() interfaces
The address cannot be negative so make it unsigned.  Also, an unsigned
int is always sufficient for the length, so no need to overdo it with a
size_t.  Finally, add in range checks to see if the values passed in
actually fit where they are used.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 11:07:48 +01:00
Chris Rorvick
0e806151e8 ALSA: line6: toneport: Use explicit type for firmware version
The firmware version is a single byte so have the variable type agree.
Since the address to this member is passed to the read function, using
an int is not even portable.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:41:59 +01:00
Chris Rorvick
12b00157fd ALSA: line6: Use explicit type for serial number
The serial number (aka ESN) is a 32-bit value.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:39:05 +01:00
Chris Rorvick
e474e7fd40 ALSA: line6: Return EIO if read/write not successful
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:37:43 +01:00
Chris Rorvick
f3dfd1be08 ALSA: line6: Return error if device not responding
Put an upper bound on how long we will wait for the device to respond to
a read/write request (i.e., 100 milliseconds) and return an error if
this is reached.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:37:30 +01:00
Chris Rorvick
e64e94df99 ALSA: line6: Add delay before reading status
The device indicates the result of a read/write operation by making the
status available on a subsequent request from the driver.  This is not
ready immediately, though, so the driver is currently slamming the
device with hundreds of pointless requests before getting the expected
response.  Add a two millisecond delay before each attempt.  This is
approximately the behavior observed with version 4.2.7.1 of the Windows
driver.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:33:55 +01:00
Pierre-Louis Bossart
ea33d359c4 ALSA: usb: update trigger timestamp on first non-zero URB submitted
The first URBs are submitted during the prepare stage. When .trigger is
called, the ALSA core saves a trigger tstamp that doesn't correspond to
the actual time when the samples are submitted. The trigger_tstamp is
now updated when the first data are submitted to avoid any time offsets.

A usb-specific trigger_tstamp_pending_update flag is used for now,
at some point the flag would need to move to the ALSA core, USB
is not the only interface where silent block transfers are programmed
as part of the prepare stage, with actual data enabled when .trigger
is called.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09 16:02:43 +01:00
Chris Rorvick
12865cac38 ALSA: line6: Pass driver name to line6_probe()
Provide a unique name for each driver instead of using "line6usb" for
all of them.  This will allow for different configurations based on the
driver type.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08 09:07:07 +01:00
Chris Rorvick
f2bd242fa1 ALSA: line6: Pass toneport pointer to toneport_has_led()
It is unlikely this function would ever be used in a context without a
pointer to a `struct usb_line6_toneport', so grab the device type from
it rather than having the caller do it.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08 09:06:08 +01:00
Chris Rorvick
89444601e5 ALSA: line6: Add toneport_has_source_select()
Add a predicate for testing if the device supports source selection to
make the conditional logic around this a bit cleaner.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08 09:05:56 +01:00
Takashi Iwai
9b6ff3fb96 ALSA: line6: Get rid of unused variable in pod.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06 10:12:46 +01:00
Takashi Iwai
02fc76f6a7 ALSA: line6: Create sysfs via snd_card_add_dev_attr()
Use the new helper function to create sysfs entries in the card more
gracefully without races.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06 10:09:23 +01:00
Nicholas Mc Guire
6ccd93bdb9 ALSA: line6: fixup of line6_start_timer argument type
line6_start_timer passes an unsigned int as argument to be used in mod_timer
which is then used by mod_timer as unsigned long, this just fixes up the
argument type. This change helps make static code checkers happy.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03 09:44:04 +01:00
Nicholas Mc Guire
695758c6c4 ALSA: line6: use msecs_to_jiffies for conversion
This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03 09:43:55 +01:00
Chris Rorvick
58647286ab ALSA: line6: Remove unused line6_midibuf_skip_message()
Use of this function ended with commits 3e58c868db ("staging: line6:
drop midi_mask_receive") and af89d2897a ("staging: line6: drop
midi_mask_transmit".)

[Removed the corresponding line in midibuf.h, too -- tiwai]

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-01 09:35:25 +01:00
Chris Rorvick
642adf5f9a ALSA: line6: Remove unused line6_midibuf_status()
This function has not been used since merging the driver into the kernel
(and a good while before that.)

[Removed the corresponding line in midibuf.h, too -- tiwai]

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-01 09:35:24 +01:00
Takashi Iwai
6eb3db91f2 Merge branch 'topic/line6' into for-next 2015-01-30 12:15:55 +01:00
Takashi Iwai
1263f61179 ALSA: line6: Remove snd_line6_ prefix of pcm property fields
It's just superfluous and doesn't give any better readability.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:47 +01:00
Takashi Iwai
72f18d0075 ALSA: line6: Remove invalid capability bits for PODxt Live Variax
PODxt Live Variax doesn't have PCM and HWMON but only MIDI.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:46 +01:00
Takashi Iwai
b3313476dd ALSA: line6: Remove struct usb_line6_podhd
It's identical with struct usb_line6.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:45 +01:00
Takashi Iwai
129b3be689 ALSA: line6: Move the contents of usbdefs.h into driver.h
Most of them are rather relevant with the definitions in driver.h,
and there are only a few lines, so just rip it off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:45 +01:00
Takashi Iwai
fd9301d33f ALSA: line6: Remove revision.h
The definition is no longer used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:44 +01:00
Takashi Iwai
cddbd4f170 ALSA: line6: Tidy up and typo fixes in comments
Just reformatting the comments and typos fixed, no functional
changes.  Particularly,
- avoid the kerneldoc marker "/**",
- reduce multiple comment lines into single lines,
- corrected wrongly referred function names

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:43 +01:00
Takashi Iwai
0416980d0a ALSA: line6: Fix volume calculation for big-endian
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:50:54 +01:00
Takashi Iwai
5da7f924a4 ALSA: usx2y: Move UAPI definition into include/uapi/sound/usb_stream.h
The user-space API definition for usb_stream stuff should be moved
to include/uapi/sound to be exposed publicly.

While we're at it, add the missing ifdef guard for double inclusion,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 17:33:49 +01:00
Takashi Iwai
5e0ddd07fa Merge branch 'topic/line6' into for-next 2015-01-28 07:24:41 +01:00
Takashi Iwai
247d95ee6d ALSA: line6: Handle error from line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:57 +01:00
Takashi Iwai
2954f914f2 ALSA: line6: Make common PCM pointer callback
Both playback and capture callbacks are identical, so let's merge
them.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:45 +01:00
Takashi Iwai
63e20df1e5 ALSA: line6: Reorganize PCM stream handling
The current code deals with the stream start / stop solely via
line6_pcm_acquire() and line6_pcm_release().  This was (supposedly)
intended to avoid the races, but it doesn't work as expected.  The
concurrent acquire and release calls can be performed without proper
protections, thus this might result in memory corruption.
Furthermore, we can't take a mutex to protect the whole function
because it can be called from the PCM trigger callback that is an
atomic context.  Also spinlock isn't appropriate because the function
allocates with kmalloc with GFP_KERNEL.  That is, these function just
lead to singular problems.

This is an attempt to reduce the existing races.  First off, separate
both the stream buffer management and the stream URB management.  The
former is protected via a newly introduced state_mutex while the
latter is protected via each line6_pcm_stream lock.

Secondly, the stream state are now managed in opened and running bit
flags of each line6_pcm_stream.  Not only this a bit clearer than
previous combined bit flags, this also gives a better abstraction.
These rewrites allows us to make common hw_params and hw_free
callbacks for both playback and capture directions.

For the monitor and impulse operations, still line6_pcm_acquire() and
line6_pcm_release() are used.  They call internally the corresponding
functions for both playback and capture streams with proper lock or
mutex.  Unlike the previous versions, these function don't take the
bit masks but the only single type value.  Also they are supposed to
be applied only as duplex operations.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:36 +01:00
Takashi Iwai
f2bb614bb6 ALSA: line6: Clear prev_fbuf and prev_fsize properly
Clearing prev_fsize in line6_pcm_acquire() is pretty racy.
This can be called at any time while the stream is being played.
Rather better to clear prev_fbuf and prev_fsize at the proper place
like the stream stop for capture, and just after copying the monitor /
impulse data inside the spinlock.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:30 +01:00
Takashi Iwai
3d3ae4454d ALSA: line6: Fix racy loopback handling
The impulse and monitor handling in submit_audio_out_urb() isn't
protected thus this can be racy with the capture stream handling.
This patch extends the range to protect via each stream's spinlock
(now the whole submit_audio_*_urb() are covered), and take the capture
stream lock additionally for the impulse and monitor handling part.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:23 +01:00
Takashi Iwai
d6ca69d825 ALSA: line6: Minor tidy up in line6_probe()
Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:16 +01:00
Takashi Iwai
aca514b823 ALSA: line6: Let snd_card_new() allocate private data
Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe().  This simplifies the primary probe functions.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:07 +01:00
Takashi Iwai
f66fd990c5 ALSA: line6: Drop interface argument from private_init and disconnect callbacks
The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev.  Drop them from
the callbacks.  Also, pass the usb id to private_init so that the
driver can deal with it there.  This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:59 +01:00
Takashi Iwai
62a109d9e2 ALSA: line6: Skip volume manipulation during silence copying
A minor optimization; while pausing, the driver just copies the zero
that doesn't need any volume changes.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:52 +01:00
Takashi Iwai
c8491535d7 ALSA: line6: Do clipping in volume / monitor manipulations
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:45 +01:00
Takashi Iwai
e90576c595 ALSA: line6: Consolidate PCM stream buffer allocation and free
The PCM stream buffer allocation and free are identical for both
playback and capture streams.  Provide single helper functions.
These are used only in pcm.c, thus they can be even static.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:39 +01:00
Takashi Iwai
ccaac9ed79 ALSA: line6: Use dev_err()
This is the last remaining snd_printk() usage in this driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:33 +01:00
Takashi Iwai
d8131e67f0 ALSA: line6: Consolidate URB unlink and sync helpers
The codes to unlink and sync URBs are identical for both playback and
capture streams.  Consolidate to single helper functions.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:27 +01:00
Takashi Iwai
ad0119abe2 ALSA: line6: Rearrange PCM structure
Introduce a new line6_pcm_stream structure and group individual
fields of snd_line6_pcm struct to playback and capture groups.

This patch itself just does rename and nothing else.  More
meaningful cleanups based on these fields shuffling will follow.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:18 +01:00
Takashi Iwai
ab5cdcbab2 ALSA: line6: Drop voodoo workarounds
If the problem still really remains, we should fix it instead of
papering over it like this...

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:12 +01:00
Takashi Iwai
9fb754b79e ALSA: line6: Use incremental loop
Using a decremental loop without particular reasons worsens the
readability a lot.  Use incremental loops instead.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:06 +01:00
Takashi Iwai
f2a76225b9 ALSA: line6: Drop superfluous spinlock for trigger
The trigger callback is already spinlocked, so we need no more lock
here (even for the linked substreams).  Let's drop it.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:00 +01:00
Takashi Iwai
5343ecf4e5 ALSA: line6: Fix the error recovery in line6_pcm_acquire()
line6_pcm_acquire() tries to restore the newly obtained resources at
the error path.  But some flags aren't recorded and released properly
when the corresponding buffer is already present.  These bits have to
be cleared in the error recovery, too.

Also, "flags_final" can be initialized to zero since we pass only the
subset of "channels" bits.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:53 +01:00
Takashi Iwai
6aa7f8ef29 ALSA: line6: Use logical OR
Fixed a few places using bits OR wrongly for condition checks.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:46 +01:00
Takashi Iwai
eab22e4053 ALSA: line6: Fix missing error handling in line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:40 +01:00
Takashi Iwai
bc518ba4cc ALSA: line6: Reduce superfluous spinlock in midi.c
The midi_transmit_lock is used always inside the send_urb_lock, thus
it doesn't play any role.  Let's kill it.  Also, rename
"send_urb_lock" as a more simple name "lock" since this is the only
lock for midi.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:34 +01:00
Takashi Iwai
b55004f9fd ALSA: line6: Remove unused line6_nop_read()
The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:28 +01:00
Takashi Iwai
6b562f63dd ALSA: line6: Fix memory leak at probe error path
Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:21 +01:00
Takashi Iwai
644d90850c ALSA: line6: Minor refactoring
Split some codes in the lengthy line6_probe().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:15 +01:00
Takashi Iwai
f44edd7b2b ALSA: line6/toneport: Implement LED controls via LED class
Instead of non-standard sysfs, reimplement the LED controls on
TonePort as LED class devices.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:08 +01:00
Takashi Iwai
bf115fcf95 ALSA: line6/toneport: Fix wrong argument for toneport_has_led()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:02 +01:00
Takashi Iwai
eedd0e95d3 ALSA: line6: Don't forget to call driver's destructor at error path
Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:55 +01:00
Takashi Iwai
6dd1c05cd7 ALSA: line6/toneport: Move setup_timer() at the beginning
... so that timer_del_sync() in the destructor can be called safely at
any time.  Also move the mod_timer() call in toneport_setup(), which
is a bit clearer place.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:47 +01:00
Takashi Iwai
8a3b7c086a ALSA: line6: Remove superfluous NULL checks in each driver
The interface and driver objects are always set when callbacks are
called.  Drop such superfluous NULL checks in init and disconnect
calls of each driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:37 +01:00
Takashi Iwai
2a324fcdb5 ALSA: line6: Abort if inconsistent usbdev is found at disconnect
It's utterly unsafe to proceed further the disconnect procedure if the
assigned usbdev is inconsistent with the expected object.  Better to
put a WARN_ON() for more cautions and abort immediately.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:29 +01:00
Takashi Iwai
270fd9c7f9 ALSA: line6: Yet more cleanup of superfluous NULL checks
... in line6_disconnect() as well.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:18:04 +01:00
Takashi Iwai
7533185eee Merge branch 'for-linus' into for-next
Sync with the latest 3.19-rc state for applying other ALSA sequencer
core fixes.
2015-01-26 13:53:41 +01:00
Takashi Iwai
3b15d0d505 Merge branch 'topic/timer-cleanup' into for-next 2015-01-20 10:11:27 +01:00
Takashi Iwai
86b5f3ec41 Merge branch 'topic/line6' into for-next 2015-01-20 10:08:06 +01:00
Chris Rorvick
c078a4aac2 ALSA: line6: Remove driver version from header comment
The driver version string was removed in an ealier commit for being
useless.  These are equally useless.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 09:52:40 +01:00
Chris Rorvick
c6fffce92e ALSA: line6: Refer to manufacturer as "Line 6"
The correct spelling includes the space.  Fix this in strings and
comments that refer to the manufacturer.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 09:52:30 +01:00
Chris Rorvick
35ae48a3f4 ALSA: line6: Remove superfluous NULL checks
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 09:52:20 +01:00
Takashi Iwai
4d79fb1ed2 ALSA: line6: Drop line6_send_program() and line6_transmit_parameter()
Both functions are used nowhere.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:19:12 +01:00
Takashi Iwai
7372319028 ALSA: line6: Make line6_send_raw_message() static
It's used only locally.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:19:05 +01:00
Takashi Iwai
5a4753112a ALSA: line6: Sync PCM stop at disconnect
Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared.  Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:44 +01:00
Takashi Iwai
31ca192139 ALSA: line6: Remove superfluous disconnect call in suspend handler
Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing.  Let's get rid of it.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:33 +01:00
Takashi Iwai
b2a3b02392 ALSA: line6: Remove CHECK_RETURN macro
Such a macro doesn't improve readability.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:27 +01:00
Takashi Iwai
10e3a023c9 ALSA: line6: Drop MISSING_CASE macro
Such a debug is needed in the core code, not in each lowlevel driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:20 +01:00
Takashi Iwai
2cd53fa9d3 ALSA: line6: Remove driver version string
This is rather useless for a driver that has been already merged into
the official tree.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:10 +01:00
Takashi Iwai
85a9339bec ALSA: line6: Reorganize card resource handling
This is a fairly big rewrite regarding the card resource management in
line6 drivers:

- The card creation is moved into line6_probe().  This adds the global
  destructor to private_free, so that each driver doesn't have to call
  it any longer.

- The USB disconnect callback handles the card release, thus each
  driver needs to concentrate on only its own resources.  No need to
  snd_card_*() call in the destructor.

- Fix the potential stall in disconnection by removing
  snd_card_free().   It's replaced with snd_card_free_when_closed()
  for asynchronous release.

- The only remaining operation for the card in each driver is the call
  of snd_card_register().  All the rest are dealt in the common module
  by itself.

- These ended up with removal of audio.[ch] as a result of a reduction
  of one layer.  Each driver just needs to call line6_probe().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:17:16 +01:00
Takashi Iwai
84ac9bb12e ALSA: line6: Drop superfluous irqsave/irqrestore in PCM trigger callback
The PCM trigger callback is guaranteed to be called already in
spinlock / irq-disabled context.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:16:18 +01:00
Takashi Iwai
7d70c81cca ALSA: line6: Don't handle PCM trigger for other cards
Otherwise it oopses.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:16:10 +01:00
Takashi Iwai
a019f5e8c5 ALSA: line6: Remove superfluous out-of-memory error messages
Kernel already shows the error in the common path.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:16:01 +01:00
Takashi Iwai
45a82f1891 ALSA: line6: Drop usb_device sysfs symlink
It's non-standard and rather superfluous.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:15:53 +01:00
Takashi Iwai
988d350aef ALSA: line6: Drop invalid SNDRV_PCM_INFO_RESUME flag
The line6 drivers don't support the full resume although they set
SNDRV_PCM_INFO_RESUME.  These flags have to be dropped to inform
properly to the user-space.

Also, drop the CONFIG_PM in trigger callbacks, too, which are rather
superfluous.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:15:38 +01:00
Takashi Iwai
aaa68d2f29 ALSA: line6: Drop superfluous snd_device for rawmidi
Like the previous fix for PCM, attach the card-specific resource into
rawmidi->private_data instead of handling in a snd_device object.
This simplifies the code and structure.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:15:02 +01:00
Takashi Iwai
b45a7c5654 ALSA: line6: Drop superfluous snd_device for PCM
Instead of handling the card-specific resource in snd_device, attach
it into pcm->private_data and release it directly in private_free.
This simplifies the code and structure.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:14:55 +01:00
Takashi Iwai
075587b723 ALSA: line6: Handle impulse response via control API
Instead of sysfs and the conditional build with Kconfig, implement the
handling of the impulse response controls via control API, and always
enable the build.  Two new controls, "Impulse Response Volume" and
"Impulse Response Period" are added as a replacement for the former
sysfs files.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:14:36 +01:00
Takashi Iwai
ccddbe4a99 ALSA: line6: Split to each driver
Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module.  The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:14:17 +01:00
Takashi Iwai
0f2524b347 ALSA: line6: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:46:02 +01:00
Takashi Iwai
28e237a9b7 ALSA: usb-audio: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:43:50 +01:00