Like all of the other *30 ThinkPad models, the W530 has a broken acpi-video
backlight control. Note in order for this to actually fix things on the
ThinkPad W530 the commit titled:
"nouveau: Don't check acpi_video_backlight_support() before registering backlight"
is also needed.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1093171
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When video.use_native_backlight=1 and non intel gfx are in use, the raw
backlight device of the gfx driver will show up after acpi-video has done its
acpi_video_verify_backlight_support() check.
This causes video.use_native_backlight=1 to not have the desired result.
This patch fixes this by adding a backlight notifier and when a raw
backlight is registered or unregistered re-doing the
acpi_video_verify_backlight_support() check.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_bus_attach_private_data() to attach private data
instead of acpi_attach_data().
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is already acpi_bus_get_private_data() to get ACPI handle data
which is associated with acpi_bus_private_data_handler(). This patch
is to add acpi_bus_attach_private_data() to make a pair and facilitate
to attach and get data to/from ACPI handle.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 1a699476e2 ("ACPI / hotplug / PCI: Hotplug notifications
from acpi_bus_notify()") added debug messages for a few common
events. These debug messages are unconditionally enabled if
CONFIG_DYNAMIC_DEBUG is defined, contrary to the documented
meaning, making the ACPI system spew lots of unwanted noise on
any kernel with dynamic debugging.
The bug was introduced by commit fbfddae696 ("ACPI: Add
acpi_handle_<level>() interfaces"), which added the
CONFIG_DYNAMIC_DEBUG dependency without respecting its meaning.
Fix by adding real support for dynamic_debug.
Fixes: fbfddae696 ("ACPI: Add acpi_handle_<level>() interfaces")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the thermal module is to be removed, we should destroy the wq
acpi_thermal_pm_queue after the ACPI driver's remove callback is
executed as we will need to flush the workqueue there, or a NULL pointer
access will be hit.
Reported-and-tested-by: Kui Zhang <kuizhang@gmail.com>
References: http://www.spinics.net/lists/kernel/msg1747251.html
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This creates fractional divider type clock for the ones that
have it. It is needed by the UART driver as the clock rate must
accommodate to the requested baud rate.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A power domain where we save the context of the additional
LPSS registers. We need to do this or all LPSS devices are
left in reset state when resuming from D3 on some Baytrails.
The devices with the fractional clock divider also have
zeros for N and M values after resuming unless they are
reset.
Li Aubrey found the root cause for the issue. The idea of
using power domain for LPSS came from Mika Westerberg.
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Li Aubrey <aubrey.li@linux.intel.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[rjw: Added the .complete() callback to the PM domain, fixed build
warning on 32-bit.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To seed up suspend and resume of devices included into Intel SoCs
handled by the ACPI LPSS driver during system suspend, make
acpi_lpss_create_device() call device_enable_async_suspend() for
every device created by it.
This requires acpi_create_platform_device() to be modified to return
a pointer to struct platform_device instead of an int. As a result,
acpi_create_platform_device() cannot be pointed to by the .attach
pointer in platform_handler directly any more, so a simple wrapper
around it is necessary for this purpose. That, in turn, allows the
second unused argument of acpi_create_platform_device() to be
dropped, which is an improvement.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the x86 dynamic IRQ allocation problem has been resolved with
commmit 62a08ae2a5 (genirq: x86: Ensure that dynamic irq allocation does
not conflict), we can add back Baytrail-T ACPI ID to the pinctrl driver.
This makes the driver to work on Asus T100 where it is needed for several
things like ACPI GPIO events and SD card detection.
References: https://bugzilla.kernel.org/show_bug.cgi?id=68291
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jin Yao <yao.jin@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add an acpi_video_unregister_backlight function, which only unregisters
the backlight device, and leaves the acpi_notifier in place. Some acpi_vendor
driver need this as they don't want the acpi_video# backlight device, but do
need the acpi-video driver for hotkey handling.
Chances are that this new acpi_video_unregister_backlight() is actually
what existing acpi_vendor drivers have wanted all along. Currently acpi_vendor
drivers which want to disable the acpi_video# backlight device, make 2 calls:
acpi_video_dmi_promote_vendor();
acpi_video_unregister();
The intention here is to make things independent of when acpi_video_register()
gets called. As acpi_video_register() will get called on acpi-video load time
on non intel gfx machines, while it gets called on i915 load time on intel
gfx machines.
This leads to the following 2 interesting scenarios:
a) intel gfx:
1) acpi-video module gets loaded (as it is a dependency of acpi_vendor
and i915)
2) acpi-video does NOT call acpi_video_register()
3) acpi_vendor loads (lets assume it loads before i915), calls
acpi_video_dmi_promote_vendor(); which sets
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
4) calls acpi_video_unregister -> not registered, nop
5) i915 loads, calls acpi_video_register
6) acpi_video_register registers the acpi_notifier for the hotkeys,
does NOT register a backlight device because of
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
b) non intel gfx
1) acpi-video module gets loaded (as it is a dependency acpi_vendor)
2) acpi-video calls acpi_video_register()
3) acpi_video_register registers the acpi_notifier for the hotkeys,
and a backlight device
4) acpi_vendor loads, calls acpi_video_dmi_promote_vendor()
5) calls acpi_video_unregister, this unregisters BOTH the acpi_notifier
for the hotkeys AND the backlight device
So here we have possibly the same acpi_vendor module, making the same calls,
but with different results, in one cases acpi-video does handle hotkeys,
in the other it does not.
Note that the a) scenario turns into b) if we assume the i915 module loads
before the vendor_acpi module, so we also have different behavior depending
on module loading order!
So as said I believe that quite a few existing acpi_vendor modules really
always want the behavior of a), hence this patch adds a new
acpi_video_unregister_backlight() which gives the behavior of a) independent
of module loading order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No reason for excluding the remaining ones.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[rjw: Rebased and exported the new acpi_subsys_complete() too.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI PM domain's PM callbacks to avoid resuming devices
during system suspend (in order to modify their wakeup settings etc.)
if that isn't necessary.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes the following issue:
If DSDT is customized, no local DSDT copy is needed.
References: https://bugzilla.kernel.org/show_bug.cgi?id=69711
Signed-off-by: Enrico Etxe Arte <goitizena.generoa@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 2.6.35+ <stable@vger.kernel.org> # 2.6.35+
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Seems it helps some users, but causes issues for other users:
https://bugzilla.redhat.com/show_bug.cgi?id=1089545
So lets drop it for now until we've figured out a better fix.
Fixes: 43d9490244 (ACPI / video: Add use_native_backlight quirks for more systems)
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During CPU online/offline testing on a large system, one of the
processors got stuck after the message "bad: scheduling from the
idle thread!". The problem is that acpi_cpu_soft_notify() calls
acpi_bus_get_device() for all action types. CPU_STARTING and
CPU_DYING do not allow the notify handlers to sleep. However,
acpi_bus_get_device() can sleep in acpi_ut_acquire_mutex().
Change acpi_cpu_soft_notify() to return immediately for CPU_STARTING
and CPU_DYING as they have no action in this handler.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Most time of battery resume callback is spent on executing AML code
_BTP, _BIF and _BIF to get battery info, status and set alarm. These
AML methods may access EC operation regions several times and consumes
time.
These operations are not necessary during devices resume and can run
during POST_SUSPEND/HIBERNATION event when all processes are thawed.
This also can avoid removing and adding battery sysfs nodes every system
resume even if the battery unit is not actually changed. The original code
updates sysfs nodes without check and this seems not reasonable.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These IDs are used on Baytrail boards such as Lenovo Miix 2
and Asus Transformer Book T100TA. On lenovo Miix 2 8",
BCM4752 is called LNV4752. All the rest of the IDs are for
Broadcom BCM43241 module with the ID referring to different
revision number.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpi_processor_get_info(), ACPI processor info is initialized including
ID, namely CPU index. Currently, on a UP system running an SMP kerenl with
no LAPIC in the MADT, cpu0_initialized is checked to decide whether or not
the CPU has been initialized.
However, this check may not be sufficient for kdump kernels. Most of time
only 1 CPU is supported because of known problems in kdump kernels. So say
the multiple CPUs are present in the boot kernel and a crash happens on
one specific CPU, say CPU2. Then it jumps into the kdump kernel with
"nr_cpus=1" in the command line. In this situation, the kdump kernel
will reuse the ACPI resources from the crashed kernel directly. That
means all LAPIC instances are enabled in the MADT while only one CPU is
in use. In the kdump kernel, x86_cpu_to_apicid contains the correct APIC
ID and it's related to the CPU ID. If cpu0_initialized is checked only, 0
will be used as the CPU index instead of that APIC ID, which is not
correct.
In addition to checking cpu0_initialized, check acpi_lapic. If acpi_lapic
is 0, then no LAPIC is available from the MADT and the system should be
treated as a UP one without a LAPIC (that is, assign 0 to the CPU index).
Otherwise, use the original (valid) CPU index.
Signed-off-by: Baoquan He <bhe@redhat.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we're not going to be registering any backlight devices then
acpi_video_resume is always nop, so don't register it in that case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "freeze" sleep state suffers from the same issue that was
addressed by commit ad07277e82 (ACPI / PM: Hold acpi_scan_lock over
system PM transitions) for ACPI sleep states, that is, things break
if ->remove() is called for devices whose system resume callbacks
haven't been executed yet.
It also can be addressed in the same way, by holding the ACPI scan
lock over the "freeze" sleep state and PM transitions to and from
that state, but ->begin() and ->end() platform operations for the
"freeze" sleep state are needed for this purpose.
This change has been tested on Acer Aspire S5 with Thunderbolt.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-video:
ACPI / video: correct DMI tag for Dell Inspiron 7520
ACPI / video: Add use_native_backlight quirks for more systems
* acpi-blacklist:
ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX
ACPI: blacklist win8 OSI for Dell Inspiron 7737
* acpi-ac:
ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"
* acpi-proc:
ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig
ACPI: Revert "ACPI / Battery: Remove battery's proc directory"
ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"
* acpica:
ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().
* acpi-tpm:
ACPI / TPM: Fix resume regression on Chromebooks
* acpi-processor:
ACPI / processor: do not mark present at boot but not onlined CPU as onlined
We need to find a smarter way to switch to 64-bit FADT addresses according
to the bug report. This patch reverts Linux to the original behavior.
Fixes: 0249ed2444 (ACPICA: Add option to favor 32-bit FADT addresses.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The DMI tag used to identify Dell Inspiron 7520 should be product name
instead of product version.
Fixes: 0e9f81d3b7 (ACPI / video: Add systems that should favour native backlight interface)
Reported-and-tested-by: Téo Mazars <teomazars@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=909552
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Do not tell people in the Kconfig help when exactly we are going to
remove the deprecated ACPI interfaces in /proc, because, honestly,
we don't know. We will remove them when they are not used any more.
In particular, do not tell them that the interfaces will be removed
in a kernel release that already happened long ago.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Export the acpi_target_system_state() function to modules so that
modular drivers can use it to check what the target ACPI sleep state
of the system is (that is needed for i915 mostly at this point).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_processor_add() assumes that present at boot CPUs
are always onlined, it is not so if a CPU failed to become
onlined. As result acpi_processor_add() will mark such CPU
device as onlined in sysfs and following attempts to
online/offline it using /sys/device/system/cpu/cpuX/online
attribute will fail.
Do not poke into device internals in acpi_processor_add()
and touch "struct device { .offline }" attribute, since
for CPUs onlined at boot it's set by:
topology_init() -> arch_register_cpu() -> register_cpu()
before ACPI device tree is parsed, and for hotplugged
CPUs it's set when userspace onlines CPU via sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit cc8ef52707 (ACPI / AC: convert ACPI ac driver to
platform bus) that is reported to break thermal management on
MacBook Air 2013 with ArchLinux.
Fixes: cc8ef52707 (ACPI / AC: convert ACPI ac driver to platform bus)
References: https://bugzilla.kernel.org/show_bug.cgi?id=71711
Cc: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Without this this EEE PC exports a non working WMI interface, with this it
exports a working "good old" eeepc_laptop interface, fixing brightness control
not working as well as rfkill being stuck in a permanent wireless blocked
state.
This is not an ideal way to fix this, but various attempts to fix this
otherwise have failed, see:
References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181
Reported-and-tested-by: lou.cardone@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With win8 capabiltiy, the machine will boot itself immediately after
shutdown command has executed.
Work around this issue by disabling win8 capcability. This workaround
also makes wireless hotkey work.
Signed-off-by: Edward Lin <yidi.lin@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi-video is unique in that it not only generates brightness up/down
keypresses, but also (sometimes) actively changes the brightness itself.
This presents an inconsistent kernel interface to userspace, basically there
are 2 different scenarios, depending on the laptop model:
1) On some laptops a brightness up/down keypress means: show a brightness osd
with the current brightness, iow it is a brightness has changed notification.
2) Where as on (a lot of) other laptops it means a brightness up/down key was
pressed, deal with it.
Most of the desktop environments interpret any press as in scenario 2, and
change the brightness up / down as a response to the key events, causing it
to be changed twice, once by acpi-video and once by the DE.
With the new default for video.use_native_backlight we will be moving even
more laptops over to behaving as in scenario 2. Making the remaining laptops
even more of a weird exception. Also note that it is hard to detect scenario
1 properly in userspace, and AFAIK none of the DE-s deals with it.
Therefor this commit changes the default of brightness_switch_enabled to 0
making its behavior consistent with all the other backlight drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the handling of hotplug events in acpi_bus_notify() slightly
cleaner by using an extra local variable to indicate when
acpi_hotplug_schedule() should be called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Eliminate most use of GAS structs, since they are not needed
for GPEs.
2) Allow raw GPE numbers > 255.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes a problem where an extraneous error message was emitted during
initialization if there is a GPE block larger than 255 bits. Any
GPE block larger than 120 GPEs could generate the error.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the NULL entry sanity check implemented, the XSDT validation is
useless because:
1. If XSDT contains NULL entries, it can be bypassed by the new sanity
check mechanism;
2. If RSDP contains a bad XSDT address, invoking XSDT validation will still
lead to a kernel crash.
This patch deletes the old XSDT validation solution and thus enables the
new NULL entry sanity check solution.
Note that if there are reports reporting regressions caused by the enabling
of the new feature and disabling of the old feature, this commit should be
bisected and reverted. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that there are buggy BIOSes in the world: AMI uses an XSDT
compiler for early BIOSes, this compiler will generate XSDT with a NULL
entry. The affected BIOS versions are "AMI BIOS F2-F4".
Original solution on Linux is to use an alternative heathy root table
instead of the ill one. This commit is:
Commit: 671cc68dc6
Subject: ACPICA: Back port and refine validation of the XSDT root table.
This is an example of such XSDT dumped from B85-HD3 (AMI F3 BIOS):
[000h 0000 4] Signature : "XSDT" [Extended System Description Table]
[004h 0004 4] Table Length : 00000074
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 18
[00Ah 0010 6] Oem ID : "ALASKA"
[010h 0016 8] Oem Table ID : "A M I"
[018h 0024 4] Oem Revision : 01072009
[01Ch 0028 4] Asl Compiler ID : "AMI "
[020h 0032 4] Asl Compiler Revision : 00010013
[024h 0036 8] ACPI Table Address 0 : 00000000BA5F8180
[02Ch 0044 8] ACPI Table Address 1 : 00000000BA5F8290
[034h 0052 8] ACPI Table Address 2 : 00000000BA5F8308
[03Ch 0060 8] ACPI Table Address 3 : 00000000BA5F8848
[044h 0068 8] ACPI Table Address 4 : 00000000BA5F9320
[04Ch 0076 8] ACPI Table Address 5 : 00000000BA5F9360
[054h 0084 8] ACPI Table Address 6 : 00000000BA5F9398
[05Ch 0092 8] ACPI Table Address 7 : 00000000BA5F9708
[064h d100 8] ACPI Table Address 8 : 00000000BA5FC9A8
[06Ch 0108 8] ACPI Table Address 9 : 0000000000000000
But according to the bug report, the XSDT in fact is not broken. In the
above XSDT, ACPI Table Address 1-8 contains the same value as RSDT. The
differences can only be seen on the following 2 entries:
1. The first entry points to a FADT whose Revision is 5 while the first
entry in RSDT points to a FADT whose Revision is 2.
The FADT dumped from the address indicated by the first entry of XSDT:
FACP @ 0x00000000BA5F8180
0000: 46 41 43 50 0C 01 00 00<05>4B 41 4C 41 53 4B 41 FACP.....KALASKA
...
The FADT dumped from the address indicated by the first entry of RSDT:
FACP @ 0x00000000BA5ED0F0
0000: 46 41 43 50 84 00 00 00<02>A7 41 4C 41 53 4B 41 FACP......ALASKA
...
2. The last entry is a NULL terminator.
According to the test result, the Revision 5 FADT is accessible. Thus the
original solution turns out to be a work around that is preventing the
higher revision tables to be used for such platforms (they are all x86-64
platforms, and should use XSDT and higher revision FADT).
This patch offers a new solution, where a sanity check is performed before
installing a table address from XSDT. If the entry is NULL, it is simply
discarded.
Note that, this patch doesn't remove the original solution, so for Linux
kernel, this commit is actually a no-op, but it allows acpidump to be
working on such platforms. By doing so, we allow another easy revertable
commit to enable this feature so that when that commit is reverted, the
useful sanity check will not be affected. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch extends ACPI_HW_DEPENDENT_x mechanism to all error message
related functions so that the OSPMs can have full control to configure them
into stub functions.
This patch doesn't include code for Linux to use this new mechanism, thus
no functional change. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSPMs like Linux trend to include all header files but leave empty stub
macros for a feature that is not configured during build.
This patch cleans up global variables that are defined in utglobal.c using
ACPI_INIT_GLOBAL mechanism. In Linux, such global variables are used by
the subsystems external to ACPICA.
This patch also cleans up global variables that are defined in utglobal.c
using ACPI_GLOBAL mechanism. In Linux, such global variables are not used
or should not be used by the subsystems external to ACPICA.
External global variables can be redefined by OSPMs using
ACPI_INIT_GLOBAL/ACPI_GLOBAL macros. Thus the ACPI_GLOBAL/ACPI_INIT_GLOBAL
mechanisms can be used by OSPM to implement stubs for such external
globals.
This patch doesn't include code for Linux to use this new mechanism, thus
no functional changes. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
More of a style cleanup. If hw_build_pci_list is to return a non-zero
status, it now deletes any partial ID list that has been constructed.
If it returns AE_OK, the caller is responsible for list deletion.
David Box.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch currently only affects acpihelp and iASL which are not shipped
in the Linux kernel.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Add standard trace mechanism.
2) Add ACPI_EXPORT_SYMBOL macro.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move all of the public globals to acpixf.h for the convenience
of users. Also:
Adds #ifndef/#endif conditions arround ACPI_GLOBAL and
ACPI_INIT_GLOBAL definition so that OSPMs might be able to:
1. Redefine ACPI_GLOBAL/ACPI_INIT_GLOBAL into no-op, and
2. Redefine external global variables into immediates to implement stubs
for them.
Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch deploys ACPI_DEBUGGER_EXEC usage to utglobal.c to reduce "ifdef"
of ACPI_DEBUGGER. No functional changes. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch deletes global variable declarations that are no longer used by
ACPICA. No functional changes. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ThinkPad T430: extend the T430s entry to also cover the T430 (note we also
have another entry for T430's with a different DMI_PRODUCT_VERSION).
ThinkPad T430
Reported-and-tested-by: edm <fuffi.il.fuffo@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad T530
Reported-and-tested-by: Balint Szigeti <balint.szgt@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Acer Aspire 5742G
Reported-and-tested-by: AnAkkk <anakin.cs@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=35622
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert commit 1e2d9cd.
Fixes: 1e2d9cdfb4 (ACPI / Battery: Remove battery's proc directory)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert 7d7ee95.
Fixes: 7d7ee95886 (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux XSDT validation mechanism backport has introduced a regreession:
Commit: 671cc68dc6
Subject: ACPICA: Back port and refine validation of the XSDT root table.
There is a pointer still accessed after unmapping.
This patch fixes this issue. Lv Zheng.
Fixes: 671cc68dc6 (ACPICA: Back port and refine validation of the XSDT root table.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-ec:
ACPI / EC: Process rather than discard events in acpi_ec_clear
* acpi-processor:
ACPI / processor: Fix failure of loading acpi-cpufreq driver
According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP
processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
always returns -1. For these cases, original code will pass apic_id with
vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
is equal to zero, ignores apic_id and return zero for CPU0.
Commit b981513 (ACPI / scan: bail out early if failed to parse APIC
ID for CPU) changed the behavior. Return ENODEV when find apic_id is
less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
driver fails to be loaded on some machines. This patch is to fix it.
Fixes: b981513f80 (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Reported-and-tested-by: KATO Hiroshi <katoh@mikage.ne.jp>
Reported-and-tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Address a regression caused by commit ad332c8a45:
(ACPI / EC: Clear stale EC events on Samsung systems)
After the earlier patch, there was found to be a race condition on some
earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was
sometimes discarding a new EC event before its GPE was triggered by the
system. In the case of these systems, this meant that the "lid open"
event was not registered on resume if that was the cause of the wake,
leading to problems when attempting to close the lid to suspend again.
After testing on a number of Samsung systems, both those affected by the
previous EC bug and those affected by the race condition, it seemed that
the best course of action was to process rather than discard the events.
On Samsung systems which accumulate stale EC events, there does not seem
to be any adverse side-effects of running the associated _Q methods.
This patch adds an argument to the static function acpi_ec_sync_query so
that it may be used within the acpi_ec_clear loop in place of
acpi_ec_query_unlocked which was used previously.
With thanks to Stefan Biereigel for reporting the issue, and for all the
people who helped test the new patch on affected systems.
Fixes: ad332c8a45 (ACPI / EC: Clear stale EC events on Samsung systems)
References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173
Reported-by: Stefan Biereigel <stefan@biereigel.de>
Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
Tested-by: Stefan Biereigel <stefan@biereigel.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Nicolas Porcel <nicolasporcel06@gmail.com>
Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Tested-by: Giannis Koutsou <giannis.koutsou@gmail.com>
Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The purpose of the acpi_pad driver is to implement the "processor power
aggregator" device as described in the ACPI 4.0 spec section 8.5. It
takes requests from the BIOS (via ACPI) to put a specified number of
CPUs into idle, in order to save power, until further notice.
It does this by creating high-priority threads that try to keep the CPUs
in a high C-state (using the monitor/mwait CPU instructions). The
mwait() call is in a loop that checks periodically if the thread should
end and a few other things.
It was discovered through testing that the power_saving threads were
causing the system to consume more power than the system was consuming
before the threads were created. A counter in the main loop of
power_saving_thread() revealed that it was spinning. The mwait()
instruction was not keeping the CPU in a high C state very much if at
all.
Here is a simplification of the loop in function power_saving_thread() in
drivers/acpi/acpi_pad.c
while (!kthread_should_stop()) {
:
try_to_freeze()
:
while (!need_resched()) {
:
if (!need_resched())
__mwait(power_saving_mwait_eax, 1);
:
if (jiffies > expire_time) {
do_sleep = 1;
break;
}
}
}
If need_resched() returns true, then mwait() is not called. It was
returning true because of things like timer interrupts, as in the
following sequence.
hrtimer_interrupt->__run_hrtimer->tick_sched_timer-> update_process_times->
rcu_check_callbacks->rcu_pending->__rcu_pending->set_need_resched
Kernels 3.5.0-rc2+ do not exhibit this problem, because a patch to
try_to_freeze() in include/linux/freezer.h introduces a call to
might_sleep(), which ultimately calls schedule() to clear the reschedule
flag and allows the the loop to execute the call to mwait().
However, the changes to try_to_freeze are unrelated to acpi_pad, and it
does not seem like a good idea to rely on an unrelated patch in a
function that could later be changed and reintroduce this bug.
Therefore, it seems better to make an explicit call to schedule() in the
outer loop when the need_resched flag is set.
Reported-and-tested-by: Stuart Hayes <stuart_hayes@dell.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixed hardware does not exist on HW-reduced ACPI platforms since the
programming interface for them is not implemented on them, so no need
to scan that hardware on them.
This patch avoids creating the fixed power button ACPI device and
eliminates a probe error message from ACPI button driver on ASUS T100.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pnp:
PNP: Work around BIOS defects in Intel MCH area reporting
* acpi-hotplug:
ACPI / notify: Do not block unknown type notifications in root handler
Commit 1a699476e2 "ACPI / hotplug / PCI: Hotplug notifications from
acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(),
to block unknown type norifications, but it overlooked the fact that
they might be propagated to drivers via the ->notify() callback.
Fix the problem by allowing drivers to receive unknown type
notifications via ->notify() as before.
Fixes: 1a699476e2 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify())
Reported-and-tested-by: Mantas Mikulėnas <grawity@gmail.com>
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The size of the buffer allocated for generic_serial_bus region access
is not correct. This patch introduces acpi_ex_get_serial_access_length()
to be invoked to obtain correct data buffer length.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch is the generation of a commit that updates release automation
with newly added structures and files that are referenced by the acpidump.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpidump is initiated by Bob Moore and Chao Guan, fixed and completed
by Lv Zheng.
This patch is a generation of the commit that adds acpidump release
automation into ACPICA release process. Lv Zheng.
Note that this patch doesn't replace the kernel shipped acpidump with the
new acpidump. The replacement is done by further patches.
Original-by: Chao Guan <guanchao@mail.ustc.edu.cn>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New file is tbdata.c -- management functions for ACPICA table
manager data structures.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some various cleanups and renames.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds a new API - acpi_install_table(). OSPMs can use this API
to install tables during early boot stage. Lv Zheng.
References: https://lkml.org/lkml/2014/2/28/372
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that when acpi_gbl_disable_ssdt_table_load is specified, user
still can see it installed into /sys/firmware/acpi/tables on Linux boxes.
This is because the option only stops table "loading", but doesn't stop
table "installing", thus it is still in the acpi_gbl_root_table_list. With
previous cleanups, it is possible to prevent SSDT installations to make
it not such confusing. The global variable is also renamed. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch refines ACPI_TABLE_ORIGIN_xxx flags. No functional changes.
The previous commits have introduced the following internal APIs:
1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
2. acpi_tb_release_table: Release struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
It thus detects that the ACPI_TABLE_ORIGIN_UNKNOWN is redundant to
ACPI_TABLE_ORIGIN_OVERRIDE.
The ACPI_TABLE_ORIGIN_xxTERN_VIRTUAL flags are named as VIRTUAL in order
not to confuse with x86 logical address, this patch also renames all
"logical override" into "virtual override".
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The original table handling code does not always verify checksums before
installing a table, this is because code to achieve this must be
implemented here and there in the redundant code blocks.
There are two stages during table initialization:
1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(),
struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used
during OSPM's early boot stage.
2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is
ensured to be not NULL. This must not be used during OSPM's early boot
stage.
This patch changes acpi_tb_add_table() into an early boot safe API to reduce
code redundancies by changing the table state that is returned by this
function from "VALIDATED" to "INSTALLED". Then the table verification
code can be done in a single place. Originally, the acpi_tb_add_table() can
only be used by dynamic table loadings that are executed after early boot
stage, it cannot be used by static table loadings that are executed in
early boot stage as:
1. The address of the table is a virtual address either maintained by
OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or
"LoadTable" opcodes are executed, while during early boot stage,
physical address of the table should be used for table loading.
2. The API will ensure the state of the loaded table to be "VALIDATED"
while during early boot stage, tables maintained by root table list
should be kept as "INSTALLED".
To achieve this:
1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only
applies to DSDT/FACS installation. Rename acpi_tb_add_table() to
acpi_tb_install_non_fixed_table() as it will be applied to the installation
of the rest kinds of tables.
2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect
redudant code where their invocations actually have slight differences.
1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the
table length is known to the caller.
2. acpi_tb_install_and_override_table() is used to perform necessary
overriding before installation.
3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc
to acpi_physical_address to allow it to be invoked by static table
loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate
to the parameter change.
4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than
DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability
(logics are collected in the single function). Also delete useless code
from acpi_tb_parse_root_table().
5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and
acpi_tb_install_fixed_table() so that the table descriptor is kept in the
state of "INSTALLED" but not "VALIDATED" after returning from these
functions.
6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into
the functions to indicate a table descriptor that is not maintained by
acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and
acpi_tb_release_temporal_table() to handle the use cases of such temporal
tables. They are only used for verified installation.
7. Introduce acpi_tb_verify_table() to validate table and verify table
checksum, also remove table checksum verification from
acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions
that will convert a table into "LOADED" state or invoke it from
acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary
struct acpi_table_desc(s) that are going to be "INSTALLED".
8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc
will be overridden before installtion, this makes code simpler.
After applying the patch, tables are always installed after being
overridden and the table checksums are always verified before installation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As acpi_tb_validate_table() returns failure on checksum verification without
doing invalidatation, all its invocations that are not done to a descriptor
stored in acpi_gbl_root_table_list are checked and balanced.
But this is not a real issue as the descritors that have been passed to
acpi_tb_add_table() are all virtual address tables and the validations are in
fact no-op. The cleanup can ensure that any future extensions made on
acpi_tb_add_table() to allow it to be invoked with physical address tables
will not trigger memory leakage regressions.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch is mainly a naming cleanup to clarify hidden logics, no
functional changes.
acpi_initialize_tables() is used by Linux to install table addresses for
early boot steps. During this stage, table addresses are mapped by
early_ioremap() mechanism which is different from the runtime IO mappings.
Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc
structure during this stage.
In order to support this in ACPICA, table states are divided into
1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and
2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL).
During acpi_initialize_tables(), table state are ensured to be "INSTALLED"
but not "VALIDATED". This logic is ensured by the original code in very
ambigious way. For example, currently acpi_tb_delete_table() is invoked in
some place to perform an uninstallation while it is invoked in other place
to perform an invalidation. They happen to work just because no one enters
the penalty where the 2 behaviours are not equivalent.
The naming cleanups are made in this patch:
A. For installation and validation:
There is code setting struct acpi_table_desc.Pointer first and delete it
immediately to keep the descriptor's state as "INSTALLED" during the
installation. This patch implements this in more direct way. After
applying it, struct acpi_table_desc.Pointer will never be set in
acpi_tb_install_table() and acpi_tb_override_table() as they are the only
functions invoked during acpi_initialize_tables(). This is achieved by:
1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this
change.
2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing
consistencies as other APIs (verb. Table).
3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and
acpi_tb_table_override().
4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not
maintained in the struct acpi_table_desc of the global root table list and
rewrite acpi_tb_validate_table() using this new function to reduce
redundancies.
5. Replace the table pointer using the overridden table pointer in
acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot
stage, tables returned from this functions should be "VALIDATED". As
acpi_tb_override_table() is modified by this patch to return a "INSTALLED"
but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged,
struct acpi_table_desc.Pointer is filled in acpi_tb_add_table().
B. For invalidation and uninstallation:
The original code invalidate table by invoking acpi_tb_delete_table() here
and there, but actually this function should only be used to uninstall
tables. This can work just because its invocations are equivalent to
invalidation in some cases.
This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and
acpi_tb_uninstall_table() and cleans up the hidden logic using the new
APIs. This is achieved by:
1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly
called before resetting struct acpi_table_desc.Address. Thus the table
descriptor is in "not INSTALLED" state. This patch enforces this by
setting struct acpi_table_desc.Address to NULL in this function.
2. Introduce acpi_tb_invalidate_table() to be the reversal of
acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table().
3. Introduce acpi_tb_release_table() to release the table pointer that is not
maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table()
using this new function to reduce redundancies.
After cleaning up, the maintainability of the internal APIs are also
improved:
1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
2. acpi_tb_release_table: Release struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and
struct acpi_table_desc.Flags. It only happens in
"INSTALLED" state.
The patch has been unit tested in acpi_exec by:
1. Initializing;
2. Executing exc_tbl ASLTS tests;
3. Executing "Load" command.
So that all original acpi_tb_install_table() and acpi_tb_override_table()
invocations are covered.
Known Issues:
1. Cleanup acpi_tb_add_table() to Kill Code Redundancies
Current implementation in acpi_tb_add_table() is not very clean, further
patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(),
acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this
patch so that it is easy for the reviewers to understand the changes in
this patch.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently there are following issues in acpi_tb_add_table():
Following logic is currently correct:
1. When a table is allocated in acpi_ex_load_op(), if a reloading happens,
the allocated memory is freed by acpi_tb_add_table() and AE_OK is
returned to the caller to avoid the caller to free it again.
Following logic is currently incorrect:
1. When a table is allocated in acpi_ex_load_op() or by the
acpi_load_table() caller, if the table is already loaded, there will be
twice ACPI_FREE() called for the same pointer when acpi_tb_add_table()
returns AE_ALREADY_EXISTS.
This patch only fixes the above incorrect logic in acpi_tb_add_table():
1. Only invoke acpi_tb_delete_table() if AE_OK is going to be returned.
2. After doing so, we do not invoke ACPI_FREE() when returning AE_OK;
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When table is overridden or reloaded, acpi_tb_delete_table() is called where
struct acpi_table_desc.Pointer will be NULL. It thus is impossible for virtual
addressed tables to obtain the .Pointer again in acpi_tb_verify_table().
This patch stores virtual table addresses (ACPI_TABLE_ORIGIN_ALLOCATED,
ACPI_TABLE_ORIGIN_UNKNOWN, ACPI_TABLE_ORIGIN_OVERRIDE) in the
struct acpi_table_desc.Address field and refills the struct acpi_table_desc.Pointer
using these addresses in acpi_tb_verify_table(). Note that if a table with
ACPI_TABLE_ORIGIN_ALLOCATED set is actually freed, the .Address field
should be invalidated and thus must be replaced with NULL to avoid wrong
future validations occuring in acpi_tb_verify_table().
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The divergences in the ACPICA files makes it difficult to maintain linuxize
ACPICA table commits. This patch reduces such divergences before applying
table manager commits so that human interventions of patch rebasing can be
reduced.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds "OriginalSyncLevel" field to the output.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch cleans up all of the acpi_os_wait_events_complete() invocations to
make it to be invoked inside of ACPICA in the way to accommodate Linux's
work queue implementation.
According to the report, current Linux kernel code is facing a boot time
race issue in the acpi_remove_notify_handler(). This is because:
Linux is using work queues to implement a deferred handler call environment
while ACPICA expects OSPM to implement acpi_os_wait_events_complete() using
wait queues. The position to invoke a "waiter" is not suitable for a
"flusher" as new invocations can be scheduled after this position and
before the deletion of the handler from its management container.
Since the following commit has deleted acpi_os_wait_events_complete()
parameters, it thus might not be possible for OSPM to achieve a safe
removal using wait queues. This requires ACPICA to be changed accordingly
to "flush" handlers rather than "wait" them to be drain up:
Commit: 5ff986a2a9db11858247b71fe242fe17617229aa
Date: Wed, 16 May 2012 13:36:07 -0700
Subject: Introduce acpi_os_wait_events_complete interface.
This interface will block until asynchronous events like notifies
and GPEs are complete. Within ACPICA, it is called before a notify or GPE
handler is removed. ACPICA BZ 868.
This patch fixes this issue by invoking acpi_os_wait_events_complete() in the
way to "flush" things - it thus should be put to the position after handler
is removed from its management container but before it is destructed.
The technical concerns are:
1. MTX_NAMESPACE is used to protect things that acpi_os_wait_events_complete()
might be waiting for, thus MTX_NAMESPACE must be unlocked before
invoking acpi_os_wait_events_complete().
2. MTX_NAMESPACE is also used to implement the serialization of
acpi_install_notify_handler() and acpi_remove_notify_handler(). This patch
changes this logic, thus if there are many
acpi_install/remove_notify_handler() invoked in parallel, the
acpi_os_wait_events_complete() might face the races which could cause it
never running to an end. Normally this will require additional code to
implement a separate locking facility which is not implemented due to 3.
3. Given ACPICA users will always invoke acpi_install_notify_handler() once
during Linux module/device initialization and invoke
acpi_remove_notify_handler() once during module/device finalization,
problem stated in 2 will not happen in Linux environment due to the
mutual exclusive module/device existence, this fix thus is sufficient.
Same concerns can apply to acpi_install/remove_gpe_handler(). Reported and
tested: Ronald Vink. Fixed: Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60583
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-Tested-by: Ronald Vink <ronald.vink@boskalis.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For Notify operators, displays a comment that describe the meaning
of the notify value.
This patch updates the debugging information that is enabled for
CONFIG_ACPI_DEBUG builds.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For _HID and _CID, the disassembler will emit a string that describes
the device if the _HID/_CID value is recognized. acpihelp updated also.
acpihelp will now search for a specific ID as well as displaying
the list of "known" (to ACPICA) IDs.
This patch does not affect Linux kernel behavior as the disassembler
and the acpihelp are not shipped with it.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We would like to see the ASL for any machine that uses this operator,
so emit at least a warning to hopefully draw some attention.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change all comments that contain the string "ACPI CA" to "ACPICA"
so that the name is standard across the entire source base.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These recently added interfaces did not have these macros, used
by some hosts.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The UEFI Forum included the ACPI spec in its portfolio in October 2013
and will host future spec iterations, following the ACPI v5.0a release.
A UEFI Forum working group named ACPI Specification Working Group (ASWG)
has been established to handle future ACPI developments, any UEFI member
can join the group and contribute to ACPI specification.
So update the ownership and developers for ACPI in Kconfig accordingly,
and add another website link to ACPI specification too.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are no references to the dock_device_ids[] table anywhere in
the code and it is not even useful for module autoloading, because
the dock driver can only be built in, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like many other Windows 8 laptops the ThinkPad Helix's backlight has a
broken ACPI interface and can only be properly adjusted by using the
video card's native backlight control. This adds the ThinkPad Helix to
the list of laptops affected with this issue so that
video.use_native_backlight is enabled by default.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A debug statement in acpi_thermal_trips_update() uses a wrong trip
point (tz->trips.critical instead of tz->trips.hot) to get the
temperature value from. Fix that.
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_os_allocate_zeroed instead of acpi_os_allocate + memset.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Remaining changes from upstream ACPICA release 20140214 that introduce
code to automatically serialize the execution of methods creating any
named objects which really cannot be executed in parallel with each
other anyway (previously ACPICA attempted to address that by aborting
methods upon conflict detection, but that wasn't reliable enough and
led to other issues). From Bob Moore and Lv Zheng.
- intel_pstate fix to use del_timer_sync() instead of del_timer() in
the exit path before freeing the timer structure from Dirk Brandewie
(original patch from Thomas Gleixner).
- cpufreq fix related to system resume from Viresh Kumar.
- Serialization of frequency transitions in cpufreq that involve
PRECHANGE and POSTCHANGE notifications to avoid ordering issues
resulting from race conditions. From Srivatsa S Bhat and Viresh Kumar.
- Revert of an ACPI processor driver change that was based on a specific
interpretation of the ACPI spec which may not be correct (the relevant
part of the spec appears to be incomplete). From Hanjun Guo.
- Runtime PM core cleanups and documentation updates from Geert Uytterhoeven.
- PNP core cleanup from Michael Opdenacker.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=EfZ8
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are commits that were not quite ready when I sent the original
pull request for 3.15-rc1 several days ago, but they have spent some
time in linux-next since then and appear to be good to go. All of
them are fixes and cleanups.
Specifics:
- Remaining changes from upstream ACPICA release 20140214 that
introduce code to automatically serialize the execution of methods
creating any named objects which really cannot be executed in
parallel with each other anyway (previously ACPICA attempted to
address that by aborting methods upon conflict detection, but that
wasn't reliable enough and led to other issues). From Bob Moore
and Lv Zheng.
- intel_pstate fix to use del_timer_sync() instead of del_timer() in
the exit path before freeing the timer structure from Dirk
Brandewie (original patch from Thomas Gleixner).
- cpufreq fix related to system resume from Viresh Kumar.
- Serialization of frequency transitions in cpufreq that involve
PRECHANGE and POSTCHANGE notifications to avoid ordering issues
resulting from race conditions. From Srivatsa S Bhat and Viresh
Kumar.
- Revert of an ACPI processor driver change that was based on a
specific interpretation of the ACPI spec which may not be correct
(the relevant part of the spec appears to be incomplete). From
Hanjun Guo.
- Runtime PM core cleanups and documentation updates from Geert
Uytterhoeven.
- PNP core cleanup from Michael Opdenacker"
* tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
cpufreq: Make sure frequency transitions are serialized
intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
cpufreq: resume drivers before enabling governors
PM / Runtime: Spelling s/competing/completing/
PM / Runtime: s/foo_process_requests/foo_process_next_request/
PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
PM / Runtime: Correct documented return values for generic PM callbacks
PM / Runtime: Split line longer than 80 characters
PM / Runtime: dev_pm_info.runtime_error is signed
Revert "ACPI / processor: Make it possible to get APIC ID via GIC"
ACPICA: Enable auto-serialization as a default kernel behavior.
ACPICA: Ignore sync_level for methods that have been auto-serialized.
ACPICA: Add additional named objects for the auto-serialize method scan.
ACPICA: Add auto-serialization support for ill-behaved control methods.
ACPICA: Remove global option to serialize all control methods.
PNP: remove deprecated IRQF_DISABLED
Enumeration
- Increment max correctly in pci_scan_bridge() (Andreas Noever)
- Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
- Assign CardBus bus number only during the second pass (Andreas Noever)
- Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
- Make sure bus number resources stay within their parents bounds (Andreas Noever)
- Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
- Check for child busses which use more bus numbers than allocated (Andreas Noever)
- Don't scan random busses in pci_scan_bridge() (Andreas Noever)
- x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
- x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
- x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
NUMA
- x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
- x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
- x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
- ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
Resource management
- i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
- Add resource_contains() (Bjorn Helgaas)
- Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
- Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
- Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
- Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
- Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
- Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
- Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
- Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
- alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
- s390: Use generic pci_enable_resources() (Bjorn Helgaas)
- Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
- Set type in __request_region() (Bjorn Helgaas)
- Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
- Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
- Log IDE resource quirk in dmesg (Bjorn Helgaas)
- Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
PCI device hotplug
- Make check_link_active() non-static (Rajat Jain)
- Use link change notifications for hot-plug and removal (Rajat Jain)
- Enable link state change notifications (Rajat Jain)
- Don't disable the link permanently during removal (Rajat Jain)
- Don't check adapter or latch status while disabling (Rajat Jain)
- Disable link notification across slot reset (Rajat Jain)
- Ensure very fast hotplug events are also processed (Rajat Jain)
- Add hotplug_lock to serialize hotplug events (Rajat Jain)
- Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
- Don't turn slot off when hot-added device already exists (Yijing Wang)
MSI
- Keep pci_enable_msi() documentation (Alexander Gordeev)
- ahci: Fix broken single MSI fallback (Alexander Gordeev)
- ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
- Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
- Fix leak of msi_attrs (Greg Kroah-Hartman)
- Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
Virtualization
- Device-specific ACS support (Alex Williamson)
Freescale i.MX6
- Wait for retraining (Marek Vasut)
Marvell MVEBU
- Use Device ID and revision from underlying endpoint (Andrew Lunn)
- Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
- Call request_resource() on the apertures (Jason Gunthorpe)
- Fix potential issue in range parsing (Jean-Jacques Hiblot)
Renesas R-Car
- Check platform_get_irq() return code (Ben Dooks)
- Add error interrupt handling (Ben Dooks)
- Fix bridge logic configuration accesses (Ben Dooks)
- Register each instance independently (Magnus Damm)
- Break out window size handling (Magnus Damm)
- Make the Kconfig dependencies more generic (Magnus Damm)
Synopsys DesignWare
- Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
Miscellaneous
- Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
- Enable INTx if BIOS left them disabled (Bjorn Helgaas)
- Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
- Clean up par-arch object file list (Liviu Dudau)
- Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
- ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
- Fix pci_bus_b() build failure (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=3mNS
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Increment max correctly in pci_scan_bridge() (Andreas Noever)
- Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
- Assign CardBus bus number only during the second pass (Andreas Noever)
- Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
- Make sure bus number resources stay within their parents bounds (Andreas Noever)
- Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
- Check for child busses which use more bus numbers than allocated (Andreas Noever)
- Don't scan random busses in pci_scan_bridge() (Andreas Noever)
- x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
- x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
- x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
NUMA
- x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
- x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
- x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
- ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
Resource management
- i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
- Add resource_contains() (Bjorn Helgaas)
- Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
- Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
- Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
- Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
- Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
- Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
- Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
- Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
- alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
- s390: Use generic pci_enable_resources() (Bjorn Helgaas)
- Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
- Set type in __request_region() (Bjorn Helgaas)
- Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
- Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
- Log IDE resource quirk in dmesg (Bjorn Helgaas)
- Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
PCI device hotplug
- Make check_link_active() non-static (Rajat Jain)
- Use link change notifications for hot-plug and removal (Rajat Jain)
- Enable link state change notifications (Rajat Jain)
- Don't disable the link permanently during removal (Rajat Jain)
- Don't check adapter or latch status while disabling (Rajat Jain)
- Disable link notification across slot reset (Rajat Jain)
- Ensure very fast hotplug events are also processed (Rajat Jain)
- Add hotplug_lock to serialize hotplug events (Rajat Jain)
- Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
- Don't turn slot off when hot-added device already exists (Yijing Wang)
MSI
- Keep pci_enable_msi() documentation (Alexander Gordeev)
- ahci: Fix broken single MSI fallback (Alexander Gordeev)
- ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
- Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
- Fix leak of msi_attrs (Greg Kroah-Hartman)
- Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
Virtualization
- Device-specific ACS support (Alex Williamson)
Freescale i.MX6
- Wait for retraining (Marek Vasut)
Marvell MVEBU
- Use Device ID and revision from underlying endpoint (Andrew Lunn)
- Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
- Call request_resource() on the apertures (Jason Gunthorpe)
- Fix potential issue in range parsing (Jean-Jacques Hiblot)
Renesas R-Car
- Check platform_get_irq() return code (Ben Dooks)
- Add error interrupt handling (Ben Dooks)
- Fix bridge logic configuration accesses (Ben Dooks)
- Register each instance independently (Magnus Damm)
- Break out window size handling (Magnus Damm)
- Make the Kconfig dependencies more generic (Magnus Damm)
Synopsys DesignWare
- Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
Miscellaneous
- Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
- Enable INTx if BIOS left them disabled (Bjorn Helgaas)
- Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
- Clean up par-arch object file list (Liviu Dudau)
- Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
- ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
- Fix pci_bus_b() build failure (Paul Gortmaker)"
* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
Revert "[PATCH] Insert GART region into resource map"
PCI: Log IDE resource quirk in dmesg
PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
resources: Set type in __request_region()
PCI: Don't check resource_size() in pci_bus_alloc_resource()
s390/PCI: Use generic pci_enable_resources()
tile PCI RC: Use default pcibios_enable_device()
sparc/PCI: Use default pcibios_enable_device() (Leon only)
sh/PCI: Use default pcibios_enable_device()
microblaze/PCI: Use default pcibios_enable_device()
alpha/PCI: Use default pcibios_enable_device()
PCI: Add "weak" generic pcibios_enable_device() implementation
PCI: Don't enable decoding if BAR hasn't been assigned an address
PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
PCI: Don't try to claim IORESOURCE_UNSET resources
PCI: Check IORESOURCE_UNSET before updating BAR
PCI: Don't clear IORESOURCE_UNSET when updating BAR
PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
...
Conflicts:
arch/x86/include/asm/topology.h
drivers/ata/ahci.c
* acpica:
ACPICA: Enable auto-serialization as a default kernel behavior.
ACPICA: Ignore sync_level for methods that have been auto-serialized.
ACPICA: Add additional named objects for the auto-serialize method scan.
ACPICA: Add auto-serialization support for ill-behaved control methods.
ACPICA: Remove global option to serialize all control methods.
Revert commit df86f5df79 (ACPI / processor: Make it possible to get
APIC ID via GIC).
APIC ID refers the hardware ID of the CPU, which means MPIDR on
ARM/ARM64, but in ACPI 5.0, GIC ID feild in GIC structure have
no explicit definition and may not refer to the MPIDR.
Commit df86f5df79 assumed that gic->gic_id as MPIDR which may not be
the case, so revert it until the explicit definition of GIC structure
is ready.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The previous commit "ACPICA: Add auto-serialization support for ill-behaved
control methods" introduced the auto-serialization facility as a workaround
that can be enabled by "acpi_auto_serialize":
This feature marks control methods that create named objects as "serialized"
to avoid unwanted AE_ALREADY_EXISTS control method evaluation failures.
Enable method auto-serialization as the default kernel behavior. The new kernel
parameter is also changed from "acpi_auto_serialize" to "acpi_no_auto_serialize"
to reflect the default behavior.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
References: http://www.spinics.net/lists/linux-acpi/msg49496.html
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cannot use a sync_level for methods that have been serialized at load-time
or runtime because this may interfere with any existing use of sync_levels
within the ASL code. So, we simply ignore the sync_level for these methods,
thus preserving any existing sync_level priorities. Note, the use of
sync_levels is actually rather rare within BIOS ASL code.
References: http://www.spinics.net/lists/linux-acpi/msg49496.html
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reported-by: Sabrina Dubroka <sd@queasysnail.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds some additional opcodes that are detected and will
cause a method to be auto-serialized. These opcodes are the various
CreateXField and the FieldUnit opcodes. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support to automatically mark a control method as
"serialized" if the method creates any named objects. This will
positively prevent the method from being entered by more than one
thread and thus preventing a possible abort when an attempt is
made to create an object twice.
Implemented by parsing all non-serialize control methods at table
load time.
This feature is disabled by default and this patch also adds a new
Linux kernel parameter "acpi_auto_serialize" to allow this feature
to be turned on for a specific boot.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
